Search Results

Search found 20208 results on 809 pages for 'compiled query'.

Page 419/809 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• Innodb : cannot allocate the memory for the buffer pool

  - by mingyeow

  My innodb keeps crashing. This is the error message below. Does anyone know why this keeps happening? InnoDB: by InnoDB 49201616 bytes. Operating system errno: 12 InnoDB: Check if you should increase the swap file or InnoDB: ulimits of your operating system. InnoDB: On FreeBSD check you have compiled the OS with InnoDB: a big enough maximum process size. InnoDB: Note that in most 32-bit computers the process InnoDB: memory space is limited to 2 GB or 4 GB. InnoDB: We keep retrying the allocation for 60 seconds... 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! InnoDB: Fatal error: cannot allocate the memory for the buffer pool [ERROR] Default storage engine (InnoDB) is not available

  Read the article

• MySQL replication/connection failing over SSL

  - by Marcel Tjandraatmadja

  I set up two MySQL servers where one is replicating from the other. They both work perfectly, but once I turn on SSL I get the following error: ERROR 2026 (HY000): SSL connection error I get the same error running from command line like so: mysql --ssl=1 --ssl-ca=/etc/mysql/certificates/ca-cert.pem --ssl-cert=/etc/mysql/certificates/client-cert.pem --ssl-key=/etc/mysql/certificates/client-key.pem --user=slave --password=slavepassword --host=master.url.com Both MySQL servers are running on version 5.0.77. There is a difference that MySQL in the master server was compiled under x86_64 while in the slave server under i686. Also both machines are running CentOS 5. Plus I generated certificates as per this page. Any idea for finding a solution?

  Read the article

• How to fully use the 4G in my Laptop under Ubuntu 9.10 - 32-bit

  - by jfmessier

  I have a Toshiba A100, which I upgraded to 4G of RAM. The hardware startup indeed shows 4G of RAM, and I recently installed Windows 7, just to see how it behaves on it. So far so good, it displays 4G of RAM. Not that I tried to use it all, but it displays it. Previously under XP, I also would see 4G of RAM. But under Ubuntu 9.10 (32 or 64 bits), it only displays 2.9 G of RAM. And my kernel is the "pae" compiled one, which is supposed to do the trick to work around the 32-bit CPU limitation. How can I get Ubuntu to fully use my 4G of RAM ?

  Read the article

• MySQL /G output

  - by conandor

  I ran mysql query as below on a non-partition table mysql> use test31 Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed mysql> explain partitions SELECT * FROM my_friends WHERE (requestor = '1234567890' OR contact = '1234567890') AND status = 1 ORDER BY request_id DESC LIMIT 0,100\G *************************** 1. row *************************** id: 1 select_type: SIMPLE table: my_friends partitions: NULL type: index_merge possible_keys: friend_index,requestor,contact key: friend_index,contact key_len: 17,17 ref: NULL rows: 2 Extra: Using sort_union(friend_index,contact); Using where; Using filesort 1 row in set (0.00 sec) on a partition table mysql> explain partitions SELECT * FROM my_friends WHERE (requestor = '1234567890' OR contact = '1234567890') AND status = 1 ORDER BY request_id DESC LIMIT 0,100\G *************************** 1. row *************************** id: 1 select_type: SIMPLE table: my_friends partitions: p1_p1sp0,p1_p1sp1,p1_p1sp2,p1_p1sp3,p1_p1sp4,p1_p1sp5,p1_p1sp6,p1_p1sp7,p1_p1sp8,p1_p1sp9,p1_p1sp10,p1_p1sp11,p1_p1sp12,p1_p1sp13,p1_p1sp14,p1_p1sp15,p1_p1sp16,p1_p1sp17,p1_p1sp18,p1_p1sp19,p1_p1sp20,p1_p1sp21,p1_p1sp22,p1_p1sp23,p1_p1sp24,p1_p1sp25,p1_p1sp26,p1_p1sp27,p1_p1sp28,p1_p1sp29 type: index_merge possible_keys: friend_index,requestor,contact key: friend_index,contact key_len: 17,17 ref: NULL rows: 60 Extra: Using sort_union(friend_index,contact); Using where; Using filesort 1 row in set (0.01 sec) What does the "rows" mean? less rows is more faster query?

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• xDebug on Zend Server CE under Windows XP

  - by Hippyjim

  I have Zend Server installed on my Windows XP development machine, installed when I was naive and didn't know that Eclipse was going to become so suck so badly for PHP development. I've made the upgrade to Netbeans, but for debugging they only support xDebug. To be fair I've never used "proper" debuggers before, but other folks have raved about them so I thought I'd give it a try. I followed some directions on the Zend forum about how to install xDebug on Zend server, disabling Zend Debugger in the process. The xDebug "custom installation instructions" wizard tells me that my PHP was compiled with an unsupported compiler (MS VC8), and won't let me download anything. I tried a couple of the other xDebug binaries, but they just refused to load. So I'm left without a debugger option. Does anyone know how I can change the compiler of the php version I have installed so I can use a debugger in Netbeans? or how else i can get xDebug to install on Zend Server?

  Read the article

• How do I get VDPAU working with Ubuntu 9.1?

  - by Brad Robertson

  What do I need to do to get MKV HD videos playing with VDPAU and also Blu-ray discs? Lots of people say you need to compile the latest MPlayer (which I haven't had luck doing) for VDPAU. I found an mplayer ppa that says it has VDPAU compiled into it so I'd like to use that. What packages do I need for playing MKV files and Blu-ray with the video decoding offloaded to my GPU? So far I haven't had any luck with any of the tutorials I've found. I'm just looking for a quick synopsis that will tell me what I'm looking for as I'm kind of shooting in the dark. (I didn't know what VDPAU was until a few days ago.)

  Read the article

• Multiple PHP versions running as cgi

  - by Pierre

  I'm trying to install a second version of PHP, to run alongside the current version of php. I've compiled the latest php source from github (5.5-DEV), and I'm trying to run it as CGI. Here is my virtual host config: <VirtualHost *:8055> DocumentRoot /Library/WebServer/Documents/ ScriptAlias /cgi-bin/ /usr/local/php55/cgi Action php55-cgi /cgi-bin/php-cgi AddHandler php55-cgi .php <Directory /Library/WebServer/Documents/> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order Allow,Deny Allow from all </Directory> DirectoryIndex index.html index.php </VirtualHost> But when I go to http://127.0.0.1:8055/info.php, I get the following error: Forbidden You don't have permission to access /cgi-bin/php-cgi/info.php on this server Edit I'm now switching between LoadModule php5_module /usr/local/php54/libphp5.so and LoadModule php5_module /usr/local/php55/libphp5.so It works for now, but is not ideal. I would like to have the different versions of php on different virtual hosts

  Read the article

• RHEL5 + Awesome WM - How do i fix mod4 inversion (acts like mod4 is always pressed)

  - by sgr

  I built and installed Awesome WM on RHEL5. I have problem with mod4 acting like its always pressed. ie every time i hit "Enter" it acts like Mod4+Enter was hit. I have to hold down mod4 key (I remapped it to Caps_Lock) to actually send through just a Enter. How do i fix this? PS: If i change the WM this problem doesnt exist. yes. I do. It is mostly tab configs though. I didnt change key combos. Also, the version of awesomeWM i compiled is 3.1.1 (had trouble getting deps for the latest AwesomeWM on Rhel5)

  Read the article

• Mac compatible Web-Development Tools

  - by Derek Adair

  Hi, I'm looking for any Mac compatibile development tools that are tried and tested. I'm quite sick of my MySQL query browser crashing... And i'm sure there is probably better software out there anyways... At the moment my focus is dedicated to application development using PHP/MySQL/Ajax. (although, I will be learning ActionScript/Flex shortly). Here are the apps I regularly use and a general idea of the environment I work in: Hosting - localhost: Mamp Production: Amazon EC2 IDE - Coda: PHP/Mysql/Javascript Mysql - PHPMyAdmin MySQL query browser FTP - Coda FileZilla X11 is used for connecting to my production environment I am mainly looking for... -tools that will help me better manage (create, edit... whatever) databases. -Version control. This is huge as I'm working with a team of three other developers (we reeeeeeaaally need to standardize our environments..) Although any cool little tools to make my job easier are always a plus! I am unable to insert more than one link as I'm not rated on this forum.

  Read the article

• Coldfusion 9 losing connection to MySQL 5 database server a couple of weeks after the server is started

  - by user1503757

  We get the following Coldfusion error message after our server have been running for a couple of weeks: Error Executing Database Query.Could not create connection to database server. Attempted reconnect 3 times We run Coldfusion Enterprise 9 on a one year old XServer with Snow Leopard and MySQL 5 The server has about ten DSN set up in the Coldfusion Administrator All local, with default advanced settings, and host set to "localhost" The server is not under heavy load. The strange thing is that after a restart of the server, everything works fine. Then after a week or so, some databases will stop working, in the sense that Coldfusion cannot create a connection to them. If I then go to the Coldfusion Administrator and click "Verify all datasources", I will get that only 2 or 3 got verified, the other ones failed, and it is always the same datasources that can't be verified when the server starts to behave like this if I try to verify again, BUT NOT neccessary the same datasources that couldn't be verified the last time the server behaved like this. I know about the setting "max_connections" and we have included a line for that setting in the MySQL config file and set it to 2000, and when we read it by a query it says "2000", so that can't be the problem. Anyone?

  Read the article

• Dovecot Virtual Users and Users Domain Mapping

  - by Stojko

  I have successfully compiled, configured and ran Dovecot with virtual users feature. Here's part of my /etc/dovecot.conf configuration file: mail_location = maildir:/home/%d/%n/Maildir auth default { mechanisms = plain login userdb passwd-file { args = /home/%d/etc/passwd } passdb passwd-file { args = /home/%d/etc/shadow } socket listen { master { path = /var/run/dovecot/auth-worker mode = 0600 } } } I faced one issue I can't resolve myself. Is there anyway to create users' domains mapping and provide username in mail_location? Examples: 1. currently I have /home/domain.com/user/Maildir 2. I'd like to have /home/USER/domain.com/user/Maildir Can I achieve this somehow? Greets, Stojko

  Read the article

• How do I find out original ./configure compile time directives for Apache?

  - by evilknot

  I've inherited an abandoned server, and I need to upgrade Apache/OpenSSL. No one knows the original configure options that were used to compile it, and the original admin is long gone. PHP is not compiled in, so phpinfo()'s out. http -l and httpd -V do some good, but not enough to rebuild all of the ./configure line. I need to get all of the arguments that were used to build it including the "enable" parameters,etc.. Where does phpinfo() get this from? Is there another way to find it? Thanks!

  Read the article

• How does java permgen relate to code size

  - by brad

  I've been reading a lot about java memory management, garbage collecting et al and I'm trying to find the best settings for my limited memory (1.7g on a small ec2 instance) I'm wondering if there is a direct correlation between my code size and the permgen setting. According to sun: The permanent generation is special because it holds data needed by the virtual machine to describe objects that do not have an equivalence at the Java language level. For example objects describing classes and methods are stored in the permanent generation. To me this means that it's literally storing my class def'ns etc... Does this mean there is a direct correlation between my compiled code size and the permgen I should be setting? My whole app is about 40mb and i noticed we're using 256mb permgen. I'm thinking maybe we're using memory that could be better allocated to dynamic code like object instances etc...

  Read the article

• Hylafax and "No response to MPS"

  - by Joril

  We have an Hylafax 5.2.5 CentOS 5 installation hosted inside a Xen virtual machine. It works quite well, but now I'm in the process of upgrading/migrating it to a KVM virtual machine running Ubuntu 10.04 and Hylafax 5.5.1 (compiled from source using http://sourceforge.net/projects/hylafax/files/hylafax%20debian%20build%20files/ ) The problem I'm having is that - while receiving works fine - sending faxes is extremely unreliable, I get lots of "No response to MPS repeated 3 tries", or "Failure to transmit clean ECM image data." The line, modem and configuration files I'm using are the same as before, so I thought that it could be a KVM scheduling issue, but even setting cpu_shares to 10240 instead of 1024 doesn't change a thing... What else could I try? Here's an example log file http://pastebin.com/cN01cpEs

  Read the article

• Apache2 - rewrite a bunch of specified pathname URLs to one URL

  - by James Nine

  I need to rewrite a bunch of urls (about 100 or so) for SEO purposes, and there may be more being added in the future (probably another 50-100 later on). I need a flexible way of doing this and so far, the only way I can think of is to edit the .htaccess file using the rewrite engine. For example, I have a bunch of urls like this (please note that the query string is irrelevant, and dynamic; it could be anything. I was only using them purely as an example. I am only focusing on the pathname--the part between the hostname and query string, as marked in bold below): http://example.com/seo_term1?utm_source=google&utm_medium=cpc&utm_campaign=seo_term http://example.com/another_seo_term2?utm_source=facebook&utm_medium=cpc&utm_campaign=seo_term http://example.com/yet_another_seo_term3?utm_source=example_ad_network&utm_medium=cpc&utm_campaign=seo_term http://example.com/foobar_seo_term4 http://example.com/blah_seo_term5?test=1 etc... And they are all being rewritten to (for now): http://example.com/ What's the most efficient/effective way of doing this so that I may be able to add more terms in the future? One solution I came across is to do this (in the .htaccess file): RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ / [NC,QSA] However, the problem with this solution is that even invalid urls (such as http://example.com/blah) will be rewritten to http://example.com instead of giving a 404 code (which is what it is supposed to do anyway). I'm still trying to figure out how all this works, and the only way I can think of is to write 100 more RewriteCond statements (such as: RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR]) before the RewriteRule directive. For example: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR] RewriteCond %{REQUEST_URI} =/another_seo_term2 [NC,OR] RewriteCond %{REQUEST_URI} =/yet_another_seo_term3 [NC,OR] RewriteCond %{REQUEST_URI} =/foobar_seo_term4 [NC,OR] RewriteCond %{REQUEST_URI} =/blah_seo_term5 [NC] RewriteRule ^(.*)$ / [NC,QSA] But that doesn't sound very efficient to me. Is there a better way?

  Read the article

• How do I get VDPAU working with Ubuntu 9.10?

  - by Brad Robertson

  What do I need to do to get MKV HD videos playing with VDPAU and also Blu-ray discs? Lots of people say you need to compile the latest MPlayer (which I haven't had luck doing) for VDPAU. I found an mplayer ppa that says it has VDPAU compiled into it so I'd like to use that. What packages do I need for playing MKV files and Blu-ray with the video decoding offloaded to my GPU? So far I haven't had any luck with any of the tutorials I've found. I'm just looking for a quick synopsis that will tell me what I'm looking for as I'm kind of shooting in the dark. (I didn't know what VDPAU was until a few days ago.)

  Read the article

• Fabric doesn't launch Nginx remotely

  - by endofu

  I want to be able to start and stop an nginx server on an Ubuntu EC2 instance with Fabric. I have this two scripts in my fabfile.py: def start_nginx(): sudo('/etc/init.d/nginx start') #also tried this: run('sudo /etc/init.d/nginx start') def stop_nginx(): sudo('/etc/init.d/nginx stop') The start_nginx() seemingly runs without errors (* Starting Nginx Server.../ ...done.) but doesn't start the server (or it dies immediately). If I SSH into the instance this starts nginx perfectly: sudo /etc/init.d/nginx start The stop_nginx() Fabric script stops the server remotely. I compiled nginx from source, using this http://nginx.org/download/nginx-1.1.9.tar.gz and using this script in /etc/init.d: https://github.com/JasonGiedymin/nginx-init-ubuntu/blob/master/nginx. The only thing I modified is this line: DAEMON=/usr/local/sbin/nginx to DAEMON=/usr/sbin/nginx because that's the path I used when I ./configure-d my compile. Does anyone have any idea why the init script behaves differently being called from Fabric?

  Read the article

• --log-slave-updates is OFF but updates received from master are still logged to slave binary log?

  - by quanta

  MySQL version 5.5.14 According to the document, by the default, slave does not log to its binary log any updates that are received from a master server. Here are my config. on the slave: # egrep 'bin|slave' /etc/my.cnf relay-log=mysqld-relay-bin log-bin = /var/log/mysql/mysql-bin binlog-format=MIXED sync_binlog = 1 log-bin-trust-function-creators = 1 mysql> show global variables like 'log_slave%'; +-------------------+-------+ | Variable_name | Value | +-------------------+-------+ | log_slave_updates | OFF | +-------------------+-------+ 1 row in set (0.01 sec) mysql> select @@log_slave_updates; +---------------------+ | @@log_slave_updates | +---------------------+ | 0 | +---------------------+ 1 row in set (0.00 sec) but slave still logs the updates that are received from a master to its binary logs, let's see the file size: -rw-rw---- 1 mysql mysql 37M Apr 1 01:00 /var/log/mysql/mysql-bin.001256 -rw-rw---- 1 mysql mysql 25M Apr 2 01:00 /var/log/mysql/mysql-bin.001257 -rw-rw---- 1 mysql mysql 46M Apr 3 01:00 /var/log/mysql/mysql-bin.001258 -rw-rw---- 1 mysql mysql 115M Apr 4 01:00 /var/log/mysql/mysql-bin.001259 -rw-rw---- 1 mysql mysql 105M Apr 4 18:54 /var/log/mysql/mysql-bin.001260 and the sample query when reading these binary files with mysqlbinlog utility: #120404 19:08:57 server id 3 end_log_pos 110324763 Query thread_id=382435 exec_time=0 error_code=0 SET TIMESTAMP=1333541337/*!*/; INSERT INTO norep_SplitValues VALUES ( NAME_CONST('cur_string',_utf8'118212' COLLATE 'utf8_general_ci')) /*!*/; # at 110324763 Did I miss something?

  Read the article

• vsftpd not allowing uploads. 550 response.

  - by Josh

  I've set vsftpd up on a centos box. I keep trying to upload files but I keep getting "550 Failed to change directory" and "550 Could not get file size." Here's my vsftpd.conf # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES anon_other_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=NO # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES log_ftp_protocol=YES banner_file=/etc/vsftpd/issue local_root=/var/www guest_enable=YES guest_username=ftpusr ftp_username=nobody

  Read the article

• Replicated MongoDB server slower than simple shards

  - by displayName

  I tried to compare the performance of a sharded configuration against a sharded and replicated configuration. The sharded configuration consists of 8 shards each running on three different machines thereby constituting a total of 24 shards. All 8 of these shards run in the same partition on each machine. The sharded and replicated version is 8 shards again just like plain sharding, and all 8 mongods run on the same partition in each machine. But apart from this, each of these three machine now run additional 16 threads on another partition which serve as the secondary for the 8 mongods running on other machines. This is the way I prepared a sharded and replicated configuration with data chunks having replication factor of 3. Important point to note is that once the data has been loaded, it is not modified. So after primary and secondaries have synchronized then it doesn't matter which one i read from. To run the queries, I use an entirely different machine (let's call it config) which runs mongos and this machine's only purpose is to receive queries and run them on the cluster. Contrary to my expectations, plain sharding of 8 threads on each machine (total = 3 * 8 = 24) is performing better for queries than the sharded + replicated configuration. I have a script written to perform the query. So in order to time the scripts, I use time ./testScript and see the result. I tried changing the reading preference for replicated cluster by logging to mongo of config and run db.getMongo().setReadPref('secondary') and then exit the shell and run the queries like time ./testScript. The questions are: Where am i going wrong in the replication? Why is it slower than its plain sharding version? Does the db.getMongo().ReadPref('secondary') persist when i leave the shell and try to perform the query? All the four machines are running Linux and i have already increased the ulimit -n to 2048 from initial value of 1024 to allow more connections. The collections are properly distributed and all the mongods have equal number of chunks. Goes without saying that indices in both configurations are the same.

  Read the article

• Do you have any additions or alterations to this list of popular audio formats?

  - by roja

  All, I am trying to compile a list of common audio file formats used in both personal storage and peer transmission. I have compiled the following list, do you think that there are any significant formats missing? Are any of them not actually common formats? Any advice/alterations are highly useful. advanced audio coding, apple lossless audio file, atrac3 audio file, atrac audio file, audio interchange file format, core audio file, free lossless audio codec file, mpeg 1 audio layer 3, mpeg 2 audio, mpeg 4 audio book file, musical instrument digital interface, ogg vorbis compressed audio file, open media framework file, real audio, real audio media, waveform audio file format, windows media audio Kind regards, Roja

  Read the article

• Limit on WMIC requests from a Windows Service

  - by Anders

  Hi all, Does anyone know if there is limit on how many wmic requests Windows can handle simultaneously if they are originating from a Windows service? The reason I'm asking is because my application fails when too many simultaneous requests have been initiated. I don't get any data back from the application. However, If I compile the Python application and run it as a stand alone application all will work fine. The wmic calls are looking like this: subprocess.Popen("wmic path Win32_PerfFormattedData_PerfOS_Memory get CommittedBytes", stdout=subprocess.PIPE, stderr=subprocess.PIPE) This makes me wonder, is there a limit Windows Services and what they can perform? I mean, if the .exe file can handle all requests, then it must be something to do with the fact that I have compiled it as a Windows service.

  Read the article

• How can I disable reverse DNS in Apache 2?

  - by Creighton Hale

  I want to disable reverse DNS in Apache 2. I have done the following steps: In apache2/apache2.conf file ,HostnameLookups is set as OFF Tcpdump session confirmed thatApache was doing double reverse lookups even though the HostnameLookupsdirective was clearly turned off. No hostnames insites-available. The problem still remains. UPD: version of apache is dpkg -l | grep apache2 ii apache2-mpm-prefork 2.2.16-6+squeeze4 Apache HTTP Server - traditional non-threaded model ii apache2-utils 2.2.16-6+squeeze4 utility programs for webservers ii apache2.2-bin 2.2.16-6+squeeze4 Apache HTTP Server common binary files ii apache2.2-common 2.2.16-6+squeeze4 Apache HTTP Server common files apache2 -l Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c I think mod_security is not present.

  Read the article

• Apache 2.0.55/PHP 5.3.5 Hangs

  - by Rushyo

  Recently inherited a Windows 2k3 server running XAMPP, including ancient copies of PHP, MySQL and Apache. I'm attempting to install a second, up-to-date PHP installation on the machine so I can reference that in future instead of XAMPP's old one. Apache starts up with this new PHP installation happily. Unfortunately, when Apache references the new PHP install, whenever I try a view a page (even a non-PHP page) it hangs. The server simply doesn't respond to any HTTP request - it doesn't crash either. It just sits there with the connection open. There are no errors/warnings/notices in either the PHP or Apache logs. I've pretty much ruled out PHP's extensions (by process of systematic elimination) and most of the INI settings. I've tried reinstalling PHP from scratch. The PHP installation is PHP 5.3.5 x86 thread-safe compiled w/ VC6. The Apache installation is Apache 2.0.55. Anyone encountered similar behaviour?

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >