Search Results

Search found 18154 results on 727 pages for 'support multilanguage so'.

Page 677/727 | < Previous Page | 673 674 675 676 677 678 679 680 681 682 683 684  | Next Page >

• Need help with testdisk output

  - by dan

  I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

  Read the article

• Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

  - by sathya

  Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore   I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air -  Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications   Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated  phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

  Read the article

• MDM for Tax Authorities

  - by david.butler(at)oracle.com

  In last week’s MDM blog, we discussed MDM in the Public Sector. I want to continue that thread. After all, no industry faces tougher data quality problems than governmental organizations, and few industries suffer more significant down side consequences to poor operations than local, state and federal governments. One key challenge area is taxation. Tax Authorities face a multitude of IT challenges. Firstly, the data used in tax calculations is increasing in volume and complexity. They must improve service by introducing multi-channel contact centers and self-service capabilities. Security concerns necessitate increasingly sophisticated data protection procedures. And cost constraints are driving Tax Authorities to rely on off-the-shelf software for many of their functional areas. Compounding these issues is the fact that the IT architectures in operation at most revenue and collections agencies are very complex. They typically include multiple, disparate operational and analytical systems across which the sum total of data about individual constituents is fragmented. To make matters more complicated, taxation is not carried out by a single jurisdiction, and often sources of income including employers, investments and other sources of taxable income and deductions must also be tracked and shared among tax authorities. Collectively, these systems are involved in tax assessment and collections, risk analysis, scoring, tracking, auditing and investigation case management. The Problem of Constituent Data Management The infrastructure described above makes it very difficult to create a consolidated representation of a given party. Differing formats and data models mean that a constituent may be represented in one way in one system and in a different way in another. Individual records are frequently inaccurate, incomplete, out of date and/or inconsistent with other records relating to the same constituent. When constituent data must be aggregated and scored, information within each system must be rationalized and normalized so the agency can produce a constituent information file (CIF) that provides a single source of truth about that party. If information about that constituent changes, each system in turn must be updated. There have been many attempts to solve this problem with technology: from consolidating transactional systems to conducting manual systems integration projects and superimposing layers of business intelligence and analytics. All these approaches can be successful in solving a portion of the problem at a specific point in time, but without an enterprise perspective, anything gained is quickly lost again. Oracle Constituent Data Mastering for Tax Authorities: A Single View of the Constituent Oracle has a flexible and long-term solution to the problem of securely integrating and managing constituent data. The Oracle Solution for mastering Constituent Data for Tax Authorities is based on two core product offerings: Oracle Customer Hub and – optionally – Oracle Application Integration Architecture (AIA). Customer Hub is a master data management (MDM) product that centralizes, de-duplicates, and enriches constituent data. It unifies fragmented information without disrupting existing business processes or IT investments. Role based data access and privacy rules guarantee maximum security and privacy. Data is continuously and automatically synchronized with all source systems. With the Oracle Customer Hub managing the master constituent identity, every department can capture transaction activity against the same record, improving reporting accuracy, employee productivity, reliability of constituent analytics, and day-to-day constituent relationships. Oracle Application Integration Architecture provides a collection of core pre-built processes to support out of the box Master Data Governance across Oracle Customer Hub, Siebel CRM, and Oracle E-Business Suite. It also provides a framework to enable MDM integrations with other Oracle and non-Oracle applications. Oracle AIA removes some of the key inhibitors to implementing a service-oriented architecture (SOA) by providing a pre-built SOA-based middleware foundation as well as industry-optimized service oriented applications, all built around a SOA governance model that encourages effective design and reuse. I encourage you to read Oracle Solution for Mastering Constituents Data for Public Sector – Tax Authorities by Roberto Negro. It is an outstanding whitepaper that describes how the Oracle MDM solution allows you to create a unified, reconciled source of high-quality constituent data and gain an accurate single view of each constituent. This foundation enables you to lower the costs associated with data quality and integration and create a tax organization that is efficient, secure and constituent-centric. Also, don’t forget the upcoming webcast on Thursday, February 10th: Deliver Improved Services to Citizens at Lower Cost to your Organization Our Guest Speaker is Ruben Spekle, from Capgemini. He will also provide insight into Public Sector Master Data Management and Case Management implementations including one that was executed for a Dutch Government Agency. If you are interested in how governmental organizations from around the world are using MDM to advance their cause, click here to register for the webcast.

  Read the article

• Configure IPv6 on your Linux system (Ubuntu)

  After the presentation on IPv6 at the first event of the Emtel Knowledge Series and some recent discussion on social media networks with other geeks and Linux interested IT people here in Mauritius, I thought that I should give it a try (finally) and tweak my local network infrastructure. Honestly, I have been to busy with contractual project work and it never really occurred to me to set up IPv6 in my LAN. Well, the following paragraphs are going to shed some light on those aspects of modern computer and network technology. This is the first article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. Let's embrace IPv6 The basic configuration on Linux is actually very simple as the kernel, operating system, and user-space programs support that protocol natively. If your system is ready to go for IP (aka: IPv4), then you are good to go for anything else. At least, I didn't have to install any additional packages on my system(s). We are going to assign a static IPv6 address to the system. Hence, we have to modify the definition of interfaces and check whether we have an inet6 entry specified. Open your favourite text editor and check the following entries (it should be at least similar to this): $ sudo nano /etc/network/interfaces auto eth0# IPv4 configurationiface eth0 inet static  address 192.168.1.2  network 192.168.1.0  netmask 255.255.255.0  broadcast 192.168.1.255# IPv6 configurationiface eth0 inet6 static  pre-up modprobe ipv6  address 2001:db8:bad:a55::2  netmask 64 Of course, you might have to adjust your interface device (eth0) or you might be interested to have multiple directives for additional devices (eth1, eth2, etc.). The auto instruction takes care that your device is enabled and configured during the booting phase. The use of the pre-up directive depends on your kernel configuration but in most scenarios this might be an optional line. Anyways, it doesn't hurt to have it enabled after all - just to be on the safe side. Next, either restart your network subsystem like so: $ sudo service networking restart Or you might prefer to do it manually with identical parameters, like so: $ sudo ifconfig eth0 inet6 add 2001:db8:bad:a55::2/64 In case that you're logged in remotely into your PC (ie. via ssh), it is highly advised to opt for the second choice and add the device manually. You can check your configuration afterwards with one of the following commands (depends on whether it is installed): $ sudo ifconfig eth0eth0      Link encap:Ethernet  HWaddr 00:21:5a:50:d7:94            inet addr:192.168.160.2  Bcast:192.168.160.255  Mask:255.255.255.0          inet6 addr: fe80::221:5aff:fe50:d794/64 Scope:Link          inet6 addr: 2001:db8:bad:a55::2/64 Scope:Global          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 $ sudo ip -6 address show eth03: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000    inet6 2001:db8:bad:a55::2/64 scope global        valid_lft forever preferred_lft forever    inet6 fe80::221:5aff:fe50:d794/64 scope link        valid_lft forever preferred_lft forever In both cases, it confirms that our network device has been assigned a valid IPv6 address. That's it in general for your setup on one system. But of course, you might be interested to enable more services for IPv6, especially if you're already running a couple of them in your IP network. More details are available on the official Ubuntu Wiki. Continue to configure your network to provide IPv6 address information automatically in your local infrastructure.

  Read the article

• WebCenter Content shared folders for clustering

  - by Kyle Hatlestad

  When configuring a WebCenter Content (WCC) cluster, one of the things which makes it unique from some other WebLogic Server applications is its requirement for a shared file system.  This is actually not any different then 10g and previous versions of UCM when it ran directly on a JVM.  And while it is simple enough to say it needs a shared file system, there are some crucial details in how those directories are configured. And if they aren't followed, you may result in some unwanted behavior. This blog post will go into the details on how exactly the file systems should be split and what options are required. Beyond documents being stored on the file system and/or database and metadata being stored in the database along with other structured data, there is other information being read and written to on the file system.  Information such as user profile preferences, workflow item state information, metadata profiles, and other details are stored in files.  In addition, for certain processes within WCC, each of the nodes needs to know what the other nodes are doing so they don’t step on each other.  WCC keeps track of this through the use of lock files on the file system.  Because of this, each node of the WCC must have access to the same file system just as they have access to the same database. WCC uses its own locking mechanism using files, so it also needs to have access to those files without file attribute caching and without locking being done by the client (node).  If one of the nodes accesses a certain status file and it happens to be cached, that node might attempt to run a process which another node is already working on.  Or if a particular file is locked by one of the node clients, this could interfere with access by another node.  Unfortunately, when disabling file attribute caching on the file share, this can impact performance.  So it is important to only disable caching and locking on the particular folders which require it.  When configuring WebCenter Content after deploying the domain, it asks for 3 different directories: Content Server Instance Folder, Native File Repository Location, and Weblayout Folder.  And starting in PS5, it now asks for the User Profile Folder. Even if you plan on storing the content in the database, you still need to establish a Native File (Vault) and Weblayout directories.  These will be used for handling temporary files, cached files, and files used to deliver the UI. For these directories, the only folder which needs to have the file attribute caching and locking disabled is the ‘Content Server Instance Folder’.  So when establishing this share through NFS or a clustered file system, be sure to specify those options. For instance, if creating the share through NFS, use the ‘noac’ and ‘nolock’ options for the mount options. For the other directories, caching and locking should be enabled to provide best performance to those locations.   These directory path configurations are contained within the <domain dir>\ucm\cs\bin\intradoc.cfg file: #Server System PropertiesIDC_Id=UCM_server1 #Server Directory Variables IdcHomeDir=/u01/fmw/Oracle_ECM1/ucm/idc/ FmwDomainConfigDir=/u01/fmw/user_projects/domains/base_domain/config/fmwconfig/ AppServerJavaHome=/u01/jdk/jdk1.6.0_22/jre/ AppServerJavaUse64Bit=true IntradocDir=/mnt/share_no_cache/base_domain/ucm/cs/ VaultDir=/mnt/share_with_cache/ucm/cs/vault/ WeblayoutDir=/mnt/share_with_cache/ucm/cs/weblayout/ #Server Classpath variables #Additional Variables #NOTE: UserProfilesDir is only available in PS5 – 11.1.1.6.0UserProfilesDir=/mnt/share_with_cache/ucm/cs/data/users/profiles/ In addition to these folder configurations, it’s also recommended to move node-specific folders to local disk to avoid unnecessary traffic to the shared directory.  So on each node, go to <domain dir>\ucm\cs\bin\intradoc.cfg and add these additional configuration entries: VaultTempDir=<domain dir>/ucm/<cs>/vault/~temp/ TraceDirectory=<domain dir>/servers/<UCM_serverN>/logs/EventDirectory=<domain dir>/servers/<UCM_serverN>/logs/event/ And of course, don’t forget the cluster-specific configuration values to add as well.  These can be added through Admin Server -> General Configuration -> Additional Configuration Variables or directly in the <IntradocDir>/config/config.cfg file: ArchiverDoLocks=true DisableSharedCacheChecking=true ServiceAllowRetry=true    (use only with Oracle RAC Database)PublishLockTimeout=300000  (time can vary depending on publishing time and number of nodes) For additional information and details on clustering configuration, I highly recommend reviewing document [1209496.1] on the support site.  In addition, there is a great step-by-step guide on setting up a WebCenter Content cluster [1359930.1].

  Read the article

• Productivity vs Security [closed]

  - by nerijus

  Really do not know is this right place to ask such a questions. But it is about programming in a different light. So, currently contracting with company witch pretends to be big corporation. Everyone is so important that all small issues like developers are ignored. Give you a sample: company VPN is configured so that if you have VPN then HTTP traffic is banned. Bearing this in mind can you imagine my workflow: Morning. Ok time to get latest source. Ups, no VPN. Let’s connect. Click-click. 3 sec. wait time. Ok getting source. Do I have emails? Ups. VPN is on, can’t check my emails. Need to wait for source to come up. Finally here it is! Ok Click-click VPN is gone. What is in my email. Someone reported a bug. Good, let’s track it down. It is in TFS already. Oh, dam, I need VPN. Click-click. Ok, there is description. Yea, I have seen this issue in stachoverflow.com. Let’s go there. Ups, no internet. Click-click. No internet. What? IPconfig… DHCP server kicked me out. Dam. Renew ip. 1..2..3. Ok internet is back. Google: site: stachoverflow.com 3 min. I have solution. Great I love stackoverflow.com. Don’t want to remember days where there was no stackoveflow.com. Ok. Copy paste this like to studio. Dam, studio is stalled, can’t reach files on TFS. Click-click. VPN is back. Get source out, paste my code. Grand. Let’s see what other comments about an issue in stackoverflow.com tells. Hmm.. There is a link. Click. Dammit! No internet. Click-click. No internet. DHCP kicked me out. Dammit. Now it is even worse: this happens 3-4 times a day. After certain amount of VPN connections open\closed my internet goes down solid. Only way to get internet back is reboot. All my browser tabs/SQL windows/studio will be gone. This happened just now when I am typing this. Back to issue I am solving right now: I am getting frustrated - I do not care about better solution for this issue. Let’s do it somehow and forget. This Click-click barrier between internet and TFS kills me… Sounds familiar? You could say there are VPN settings to change. No! This is company laptop, not allowed to do changes. I am very very lucky to have admin privileges on my machine. Most of developers don’t. So just learned to live with this frustration. It takes away 40-60 minutes daily. Tried to email company support, admins. They are too important ant too busy with something that just ignored my little man’s problem. Politely ignored. Question is: Is this normal in corporate world? (Have been in States, Canada, Germany. Never seen this.)

  Read the article

• SQL SERVER – Not Possible – Delete From Multiple Table – Update Multiple Table in Single Statement

  - by pinaldave

  There are two questions which I get every single day multiple times. In my gmail, I have created standard canned reply for them. Let us see the questions here. I want to delete from multiple table in a single statement how will I do it? I want to update multiple table in a single statement how will I do it? The answer is – No, You cannot and you should not. SQL Server does not support deleting or updating from two tables in a single update. If you want to delete or update two different tables – you may want to write two different delete or update statements for it. This method has many issues – from the consistency of the data to SQL syntax. Now here is the real reason for this blog post – yesterday I was asked this question again and I replied my canned answer saying it is not possible and it should not be any way implemented that day. In the response to my reply I was pointed out to my own blog post where user suggested that I had previously mentioned this is possible and with demo example. Let us go over my conversation – you may find it interesting. Let us call the user DJ. DJ: Pinal, can we delete multiple table in a single statement or with single delete statement? Pinal: No, you cannot and you should not. DJ: Oh okey, if that is the case, why do you suggest to do that? Pinal: (baffled) I am not suggesting that. I am rather suggesting that it is not possible and it should not be possible. DJ: Hmm… but in that case why did you blog about it earlier? Pinal: (What?) No, I did not. I am pretty confident. DJ: Well, I am confident as well. You did. Pinal: In that case, it is my word against your word. Isn’t it? DJ: I have proof. Do you want to see it that you suggest it is possible? Pinal: Yes, I will be delighted too. (After 10 Minutes) DJ: Here are not one but two of your blog posts which talks about it - SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – Part 1 of 2 SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – T-SQL Example – Part 2 of 2 Pinal: Oh! DJ: I know I was correct. Pinal: Well, oh man, I did not mean there what you mean here. DJ: I did not understand can you explain it further. Pinal: Here we go. The example in the other blog is the example of the cascading delete or cascading update. I think you may want to understand the concept of the foreign keys and cascading update/delete. The concept of cascading exists to maintain data integrity. If there primary keys get deleted the update or delete reflects on the foreign key table to maintain the key integrity and data consistency. SQL Server follows ANSI Entry SQL with regard to referential integrity between PrimaryKey and ForeignKey columns which requires the inserting, updating, and deleting of data in related tables to be restricted to values that preserve the integrity. This is all together different concept than deleting multiple values in a single statement. When I hear that someone wants to delete or update multiple table in a single statement what I assume is something very similar to following. DELETE/UPDATE Table 1 (cols) Table 2 (cols) VALUES … which is not valid statement/syntax as well it is not ASNI standards as well. I guess, after this discussion with DJ, I realize I need to do a blog post so I can add the link to this blog post in my canned answer. Well, it was a fun conversation with DJ and I hope it the message is very clear now. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Joins, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Create a Smoother Period Close

  - by Get Proactive Customer Adoption Team

  Untitled Document Do You Use Oracle E-Business Suite Products Involved in Accounting Period Closes? We understand that closing the periods in your system at the end of an accounting period enables your company to make the right business decisions. We also know this requires prior preparation, good procedures, and quality data. To help you meet that need, Oracle E-Business Suite’s proactive support team developed the Period Close Advisor to help your organization conduct a smooth period close for its Oracle E-Business Suite 12 products. The Period Close Advisor is composed of logical steps you can follow, aligned by the business requirement flow. It will help with an orderly close of the product sub-ledgers before posting to the General Ledger. It combines recommendations and industry best practices with tips from subject matter experts for troubleshooting. You will find patches needed and references to assist you during each phase. Get to know the E-Business Suite Period Close Advisor The Period Close Advisor does more than help the users of Oracle E-Business Suite products close their period. You can use it before and throughout the period to stay on track. Proactively it assists you as you set up your company’s period close process. During the period, it helps evaluate your system’s readiness for initiating the period close procedures and prepare the system for a smooth period close experience. The Period Close Advisor gets you to answers when you have questions and gives you the latest news from us on Oracle E-Business Suite’s period close. The Period Close Advisor is the right place to start. How to Use the E-Business Suite Period Close The Period Close Advisor graphically guides you through your period close. The tabs show you the products (also called applications or sub-ledgers) covered, and the product order required for the processing to handle any dependencies between the products. Users of all the products it covers can benefit from the information it contains. Structure of the Period Close Advisor Clicking on a tab gives you the details for that particular step in the process. This includes an overview, showing how the products fit into the overall period close process, and step-by-step information on each phase needed to complete the period close for the tab. You will also find multimedia training and related resources you can access if you need more information. Once you click on any of the phases, you see guidance for that phase. This can include: Tips from the subject-matter experts—here are examples from a Cash Management specialist: “For organizations with high transaction volumes bank statements should be loaded and reconciled on a daily basis.” “The automatic reconciliation process can be set up to create miscellaneous transactions automatically.” References to useful Knowledge Base documents: Information Centers for the products and features FAQs on functionality Known Issues and patches with both the errors and their solutions How-to documents that explain in detail how to use a feature or complete a process White papers that give overview of a feature, list setup required to use the feature, etc. Links to diagnosticsthat help debug issues you may find in a process Additional information and alerts about a process or reports that can help you prevent issues from surfacing This excerpt from the “Process Transaction” phase for the Receivables product lists documents you’ll find helpful. How to Get Started with the Period Close Advisor The Period Close Advisor is a great resource that can be used both as a proactive tool (while setting up your period end procedures) and as the first document to refer to when you encounter an issue during the period close procedures! As mentioned earlier, the order of the product tabs in the Period Close Advisor gives you the recommended order of closing. The first thing to do is to ensure that you are following the prescribed order for closing the period, if you are using more than one sub-ledger. Next, review the information shared in the Evaluate and Prepare and Process Transactions phases. Make sure that you are following the recommended best practices; you have applied the recommended patches, etc. The Reconcile phase gives you the recommended steps to follow for reconciling a sub-ledger with the General Ledger. Ensure that your reconciliation procedure aligns with those steps. At any stage during the period close processing, if you encounter an issue, you can revisit the Period Close Advisor. Choose the product you have an issue with and then select the phase you are in. You will be able to review information that can help you find a solution to the issue you are facing. Stay Informed Oracle updates the Period Close Advisor as we learn of new issues and information. Bookmark the Oracle E-Business Suite Period Close Advisor [ID 335.1] and keep coming back to it for the latest information on period close

  Read the article

• Blank screen after installing nvidia restricted driver

  - by LaMinifalda

  I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

  Read the article

• The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

  - by david.talamelli

  [Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

  Read the article

• Oracle Fusion Middleware 11g next launch phase - what a week of product releases! Feedback from our

  - by Jürgen Kress

    Product releases: SOA Suite 11gR1 Patch Set 2 (PS2) BPM Suite 11gR1 Released Oracle JDeveloper 11g (11.1.1.3.0) (Build 5660) Oracle WebLogic Server 11gR1 (10.3.3) Oracle JRockit (4.0) Oracle Tuxedo 11gR1 (11.1.1.1.0) Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86/x86-64 All Oracle Fusion Middleware 11gR1 Software Download   BPM Suite 11gR1 Released by Manoj Das Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0   SOA Suite 11gR1 Patch Set 2 (PS2) released by Demed L'Her We just released SOA Suite 11gR1 Patch Set 2 (PS2)! You can download it as usual from: OTN (main platforms only) eDelivery (all platforms) 11gR1 PS2 is delivered as a sparse installer, that is to say that it is meant to be applied on the latest full install (11gR1 PS1). That’s great for existing PS1 users who simply need to apply the patch and run the patch assistant – but an extra step for new users who will first need to download SOA Suite 11gR1 PS1 (in addition to the PS2 patch). What’s in that release? Bug fixes of course but also several significant new features. Here is a short selection of the most significant ones: Spring component (for native Java extensibility and integration) SOA Partitions (to organize and manage your composites) Direct Binding (for transactional invocations to and from Oracle Service Bus) HTTP binding (for those of you trying to do away with SOAP and looking for simple GET and POST) Resequencer (for ordering out-of-order messages) WS Atomic Transactions (WS-AT) support (for propagation of transactions across heterogeneous environments) Check out the complete list of new features in PS2 for more (including links to the documentation for the above)! But maybe even more importantly we are also releasing Oracle Service Bus 11gR1 and BPM Suite 11gR1 at the same time – all on the same base platform (WebLogic Server 10.3.3)! (NB: it might take a while for all pages and caches to be updated with the new content so if you don’t find what you need today, try again soon!)   Are you Systems Integrations and Independent Software Vendors ready to adopt and to deliver? Make sure that you become trained: Local training calendars Register for the SOA Partner Community & Webcast www.oracle.com/goto/emea/soa What is your feedback?  Who installed the software? please feel free to share your experience at http://twitter.com/soacommunity #soacommunity Technorati Tags: SOA partner community ACE Directoris SOA Suite PS2 BPM11g First feedback from our ACE Directors and key Partners:   Now, these are great times to start the journey into BPM! Hajo Normann Reuse of components across the Oracle 11G Fusion Middleware stack, BPM just is one of the components plugging into the stack and reuses all other components. Mr. Leon Smiers With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Guido Schmutz We have real BPMN 2.0, which get's executed. No more transformation from business models to executable models - just press the run button... Torsten Winterberg Oracle BPM Suite 11g brings Out-of-box integration with WebCenter Suite and Oracle ADF development framework. Andrejus Baranovskis With the release of BPM Suite 11g, Oracle has defined new standards for Business Process platforms. Geoffroy de Lamalle With User Messaging Service you can let Soa Suite 11g do all your Messaging Edwin Biemond

  Read the article

• Upgrading Agent Controllers in Oracle Enterprise Manager Ops Center 12c

  - by S Stelting

  Oracle Enterprise Manager Ops Center 12c recently released an upgrade for Solaris Agent Controllers. In this week's blog post, we'll show you how to upgrade agent controllers. Detailed instructions about upgrading Agent Controllers are available in the product documentation here. This blog post uses an Enterprise Controller which is configured for connected mode operation. If you'd like to apply the agent update in a disconnected installation, additional instructions are available here. Step 1: Download Agent Controller Updates With a connected mode Ops Center installation, you can check for product updates at any time by selecting the Enterprise Controller from the left-hand Administration navigation tab. Select the right-hand Action link “Ops Center Downloads” to open a pop-up dialog displaying any new product updates. In this example, the Enterprise Controller has already been upgraded to the latest version (Update 1, also shown as build version 2076) so only the Agent Controller updates will appear. There are three updates available: one for Solaris 10 X86, one for Solaris 8-10 SPARC, and one for all versions of Solaris 11. Note that the last update in the screen shot is the Solaris 11 update; for details on any of the downloads, place your mouse over the information icon under the details column for a pop-up text region. Select the software to download and click the Next button to display the Ops Center license agreement. Review and click the check box to accept the license agreement, then click the Next button to begin downloading the software. The status screen shows the current download status. If desired, you can perform the downloads as a background job. Simply click the check box, then click the next button to proceed to the summary screen. The summary screen shows the updates to be downloaded as well as the current status. Clicking the Finish button will close the dialog and return to the Browser UI. The download job will continue to run in Ops Center and progress can still be viewed from the jobs menu at the bottom of the browser window. Step 2: Check the Version of Existing Agent Controllers After the download job completes, you can check the availability of agent updates as well as the current versions of your Agent Controllers from the left-hand Assets navigation tab. Select “Operating Systems” from the pull-down tab lets to display only OS assets. Next, select “Solaris” in the left-hand tab to display the Solaris assets. Finally, select the Summary tab in the center display panel to show which versions of agent controllers are installed in your data center. Notice that a few of the OS assets are not displayed in the Agent Controllers tab. Ops Center will not display OS instances which do not have an Agent Controller installation. This includes Enterprise Controllers and Proxy Controllers (unless the agent has been activated on the OS instance) and and OS instances using agentless management. For Agent Controllers which support an update, the version of agent software (in this example, 2083) appears to the right of the currently installed version. Step 3: Upgrade Your Agent Controllers If desired, you can upgrade agent controllers from the previous screen by selecting the desired systems and clicking the upgrade button. Alternatively, you can click the link “Upgrade All Agent Controllers” in the right-hand Actions menu: In either case, a pop-up dialog lets you start the upgrade process. The first screen in the dialog lets you choose the upgrade method: Ops Center provides three ways to upgrade agent controllers: Automatic Upgrade: If Agent Controllers are running on all assets, Ops Center can automatically upgrade the software to the latest version without requiring any login credentials to the system SSH using a single set of credentials: If all assets use the same login credentials, you can apply a single set to all assets for the upgrade process. The log-in credentials are the same ones used for asset discovery and management, which are stored in the Plan Management navigation tab under Credentials. SSH using individual credentials: If assets use different login credentials, you can select a different set for each asset. After selecting the upgrade method, click the Next button to proceed to the summary screen. Click the Finish button to close the pop-up dialog and start the upgrade job for the agent controllers. The upgrade job runs a series of tasks in parallel, and will upgrade all agents which have been selected. Once the job completes, the OS instances in your data center will be upgraded and running the latest version of Agent Controller software.

  Read the article

• PASS: 2013 Summit Location

  - by Bill Graziano

  HQ recently posted a brief update on our search for a location for 2013.  It includes links to posts by four Board members and two community members. I’d like to add my thoughts to the mix and ask you a question.  But I can’t give you a real understanding without telling you some history first. So far we’ve had the Summit in Chicago, San Francisco, Orlando, Dallas, Denver and Seattle.  Each has a little different feel and distinct memories.  I enjoyed getting drinks by the pool in Orlando after the sessions ended.  I didn’t like that our location in Dallas was so far away from all the nightlife.  Denver was in downtown but we had real challenges with hotels.  I enjoyed the different locations.  I always enjoyed the announcement during the third keynote with the location of the next Summit. There are two big events that impacted my thinking on the Summit location.  The first was our transition to the new management company in early 2007.  The event that September in Denver was put on with a six month planning cycle by a brand new headquarters staff.  It wasn’t perfect but came off much better than I had dared to hope.  It also moved us out of the cookie cutter conferences that we used to do into a model where we have a lot more control.  I think you’ll all agree that the production values of our last few Summits have been fantastic.  That Summit also led to our changing relationship with Microsoft.  Microsoft holds two seats on the PASS Board.  All the PASS Board members face the same challenge: we all have full-time jobs and PASS comes in second place professionally (or sometimes further back).  Starting in 2008 we were assigned a liaison from Microsoft that had a much larger block of time to coordinate with us.  That changed everything between PASS and Microsoft.  Suddenly we were talking to product marketing, Microsoft PR, their event team, the Tech*Ed team, the education division, their user group team and their field sales team – locally and internationally.  We strengthened our relationship with CSS, SQLCAT and the engineering teams.  We had exposure at the executive level that we’d never had before.  And their level of participation at the Summit changed from under 100 people to 400-500 people.  I think those 400+ Microsoft employees have value at a conference on Microsoft SQL Server.  For the first time, Seattle had a real competitive advantage over other cities. I’m one that looked very hard at staying in Seattle for a long, long time.  I think those Microsoft engineers have value to our attendees.  I think the increased support that Microsoft can provide when we’re in Seattle has value to our attendees.  But that doesn’t tell the whole story.  There’s a significant (and vocal!) percentage of our membership that wants the Summit outside Seattle.  Post-2007 PASS doesn’t know what it’s like to have a Summit outside of Seattle.  I think until we have a Summit in another city we won’t really know the trade-offs. I think a model where we move every third or every other year is interesting.  But until we have another Summit outside Seattle and we can evaluate the logistics and how important it is to have depth and variety in our Microsoft participation we won’t really know. Another benefit that comes with a move is variety or diversity.  I learn more when I’m exposed to new things and new people.  I believe that moving the Summit will give a different set of people an opportunity to attend. Grant Fritchey writes “It seems that the board is leaning, extremely heavily, towards making it a permanent fixture in Seattle.”  I don’t believe that’s true.  I know there was discussion of that earlier but I don’t believe it’s true now. And that brings me to my question.  Do we announce the city now or do we wait until the 2012 Summit?  I’m happy to announce Seattle vs. not-Seattle as soon as we sign the contract.  But I’d like to leave the actual city announcement until the 2011 Summit.  I like the drama and mystery of it.  I also like that it doesn’t give you a reason to skip a Summit and wait for the next one if it’s closer or back in Seattle.  The other side of the coin is that your planning is easier if you know where it is.  What do you think?

  Read the article

• MSCC: Career & IT Fair 2014

  Already a couple of weeks ago, I've been addressed by Ibraahim and Yunus to see whether it would be interesting to participate in the 1st Career & IT Fair organised by the UoM Computer Club. Well, luckily we met at the Global Windows Azure Bootcamp and I wasn't too sure whether it would be possible for me to attend after all. The main reason is given because of work demand and furthermore due to the fact that the Mauritius Software Craftsmanship Community currently has no advertising material at all. Here's the brief statement of the event: "The UOM Students' Computer Club in collaboration with the UOM Students' Union and UOM CSE Department is organising a 'Career & IT Fair' on the 23rd and 24th April 2014. This event has for objective to provide a platform to tertiary students, secondary students as well as vocational students, the opportunity to meet job recruiters." Luckily, I was reminded that the 23rd is a Wednesday, and therefore I decided that it might be interesting to move our weekly Code & Coffee session to the university and hence be able to attend the career fair. As it turned out it was a great choice and thankfully Pritvi, Nadim as well as Ishwon volunteered to be around at the "community booth". Thankfully, the computer club gave us - the MSCC and the LUGM - one of their spaces in the lobby area of the Paul Octave Wiéhé Auditorium. My impression about the event Very well and professionally organised. Seriously, the lads over at the UoM Computer Club did a great job in organising their 2 days event, and felt very comfortable at any time. Actually, it was kind of amusing to some of the members constantly running around and checking everything. Even though that the whole process went smooth and easy off the hand. There were a couple of interesting pieces of information and announcements during the opening ceremony. For example, the Computer Science faculty is a very young one and has been initiated back in 1988 only - just by 4 staff members at that time. Now, after 25 years they have achieved quite a lot and there are currently 1.000+ active students attending the numerous lectures and courses. But there is no room to rest on previous achievements, and I was kind of surprised to hear that there are plans to extend the campus, and offer new lectures in the fields of nanotechnology, big data handling, and - crossing fingers - the introduction and establishment of a space control centre. Mauritius is already part of the Square Kilometre Array (SKA) and hopefully there will be more activities into that direction in the near future. Community - Awareness and collaboration As stated earlier, I could only spent one morning but luckily other members of the MSCC and the LUGM stayed during the whole two days and provided answers to any interested person. As for me, I took the opportunity to get in touch with the other companies in the lobby. Mainly, to create some awareness about our IT communities but also to see whether there might be options for future engagement in common activities, too. So far, I was able to speak to representatives of the following companies: ACCA Mauritius Business at Work Infomil LinkByNet Microsoft Indian Ocean Islands & French Pacific Spherinity Training Institute Spoon Consulting Ltd. State Informatics Ltd. Unfortunately, I only had a quick chat with an HR representative of LinkByNet but I fully count on our MSCC members like Nitin or LUGM member Ronny to spread our intentions over there.  So far, all of the representatives were really interested in our concepts and activities and I'm currently catching up with an introduction flyer for the MSCC that I'm going to send out to all those contacts via mail. It would be great to have more craftsmen as well as professional support on board. Some pictures from the event MSCC: Fantastic outlook for the near future. Announcements were made on Big data, nanotechnology, and space control centre in Mauritius. Interesting! MSCC: The lobby area was cramped with students. Great way to exchange and network. Good luck to all candidates! Passing the relay staff to... I recommend you to continue to read about the first Career & IT Fair on Ish's blog. He has a great summary and more details on those two days of IT activities than I have. Thanks and feel free to leave a comment (or two)... 

  Read the article

• InnoDB Compression Improvements in MySQL 5.6

  - by Inaam Rana

  MySQL 5.6 comes with significant improvements for the compression support inside InnoDB. The enhancements that we'll talk about in this piece are also a good example of community contributions. The work on these was conceived, implemented and contributed by the engineers at Facebook. Before we plunge into the details let us familiarize ourselves with some of the key concepts surrounding InnoDB compression. In InnoDB compressed pages are fixed size. Supported sizes are 1, 2, 4, 8 and 16K. The compressed page size is specified at table creation time. InnoDB uses zlib for compression. InnoDB buffer pool will attempt to cache compressed pages like normal pages. However, whenever a page is actively used by a transaction, we'll always have the uncompressed version of the page as well i.e.: we can have a page in the buffer pool in compressed only form or in a state where we have both the compressed page and uncompressed version but we'll never have a page in uncompressed only form. On-disk we'll always only have the compressed page. When both compressed and uncompressed images are present in the buffer pool they are always kept in sync i.e.: changes are applied to both atomically. Recompression happens when changes are made to the compressed data. In order to minimize recompressions InnoDB maintains a modification log within a compressed page. This is the extra space available in the page after compression and it is used to log modifications to the compressed data thus avoiding recompressions. DELETE (and ROLLBACK of DELETE) and purge can be performed without recompressing the page. This is because the delete-mark bit and the system fields DB_TRX_ID and DB_ROLL_PTR are stored in uncompressed format on the compressed page. A record can be purged by shuffling entries in the compressed page directory. This can also be useful for updates of indexed columns, because UPDATE of a key is mapped to INSERT+DELETE+purge. A compression failure happens when we attempt to recompress a page and it does not fit in the fixed size. In such case, we first try to reorganize the page and attempt to recompress and if that fails as well then we split the page into two and recompress both pages. Now lets talk about the three major improvements that we made in MySQL 5.6.Logging of Compressed Page Images:InnoDB used to log entire compressed data on the page to the redo logs when recompression happens. This was an extra safety measure to guard against the rare case where an attempt is made to do recovery using a different zlib version from the one that was used before the crash. Because recovery is a page level operation in InnoDB we have to be sure that all recompress attempts must succeed without causing a btree page split. However, writing entire compressed data images to the redo log files not only makes the operation heavy duty but can also adversely affect flushing activity. This happens because redo space is used in a circular fashion and when we generate much more than normal redo we fill up the space much more quickly and in order to reuse the redo space we have to flush the corresponding dirty pages from the buffer pool.Starting with MySQL 5.6 a new global configuration parameter innodb_log_compressed_pages. The default value is true which is same as the current behavior. If you are sure that you are not going to attempt to recover from a crash using a different version of zlib then you should set this parameter to false. This is a dynamic parameter.Compression Level:You can now set the compression level that zlib should choose to compress the data. The global parameter is innodb_compression_level - the default value is 6 (the zlib default) and allowed values are 1 to 9. Again the parameter is dynamic i.e.: you can change it on the fly.Dynamic Padding to Reduce Compression Failures:Compression failures are expensive in terms of CPU. We go through the hoops of recompress, failure, reorganize, recompress, failure and finally page split. At the same time, how often we encounter compression failure depends largely on the compressibility of the data. In MySQL 5.6, courtesy of Facebook engineers, we have an adaptive algorithm based on per-index statistics that we gather about compression operations. The idea is that if a certain index/table is experiencing too many compression failures then we should try to pack the 16K uncompressed version of the page less densely i.e.: we let some space in the 16K page go unused in an attempt that the recompression won't end up in a failure. In other words, we dynamically keep adding 'pad' to the 16K page till we get compression failures within an agreeable range. It works the other way as well, that is we'll keep removing the pad if failure rate is fairly low. To tune the padding effort two configuration variables are exposed. innodb_compression_failure_threshold_pct: default 5, range 0 - 100,dynamic, implies the percentage of compress ops to fail before we start using to padding. Value 0 has a special meaning of disabling the padding. innodb_compression_pad_pct_max: default 50, range 0 - 75, dynamic, the  maximum percentage of uncompressed data page that can be reserved as pad.

  Read the article

• Row Count Plus Transformation

  As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

  Read the article

• Windows Phone 7 Review &ndash; Part 1: LG Quantum

  - by Nikita Polyakov

  As many of my fellow geeks, I ran out and got a retail windows Phone 7 on the first day. Just had to have it :) I’ve had the developer prototypes in my hands for previous 3 months on and off, so I finally wanted to have one I call my own. I’ve rushed the Launch   I’ve checked out both AT&T and T-Mobile offerings on day 1 and decided on a Samsung Focus. Great screen, super light and thin. If you don’t believe me that this phone can compete with the best of the non-Phone 7 offerings - get it in your hand to compare for yourself. I have to say that even though the on-screen keyboard on Windows Phone 7 is one of the best, the amount of text I write on my phone and my expectation of how long that takes for a short reply are very high. Also the phone being so slick and sexy did not feel solid or confident in my hand or pocket. As the dust settled   Arrives the LG Quantum – now on AT&T and worldwide. First impression of the softer plastic, the back battery cover is solid metal - the entire phone feels solid and indestructible! Phone fits just right in my hand, it’s almost too good. It does not feel like it will crack in your jeans. I feel safe holding it and don’t feel like if I or someone were to bump into me walking it’d fly out of my hand. I’ve dropped and had thrown the Focus a few times on accident as it’s weight is negligible. I won’t even dream of lying the first day adjusting to a 3.5’ LCD screen from the Samsung’s blistering bright and poppy AMOLED 4’ was hard. But the colors and sharpness are still very good. I find it almost easier on the eyes actually for day to day use.  I had a chance to lay the phone down in the line with the prototypes and final versions of other phones that had LCD screens – LG makes HTC looks like a budget LCD compared to a high end LCD in the home theatre department. I am consistently complemented by friends that have the HD7 or Surround on how much better my screen looks. The screen just looks like the most color correct phone out of the line up. Even next to Samsung it makes it look oversaturated, but can’t match the true blacks compensating with true white.   Day to Day Usability   What I also noticed that is a huge difference is how much I am not accidently hitting the soft keys at the bottom. I real pain on Focus since holding it in am average size hand already would accidently touch the controls at the bottom. QWERTY keyboard on this phone is great. It’s like the mission for LG is “make it solid!”. Keyboard has a very durable feel.   LG’s has a secret wild card though is the DLNA support. If you seen an ad for it, you should. Imagine this – playing a song from your phone straight to your network connected A/V receiver. Done. Pictures to TV. Done. Video. Done. DLNA works with components that advertise to as well as Windows 7, XBOX 360 and other consoles.  I will write an extensive review of that experience in near future. LG Exclusive apps – from panorama photo taker to voice to text translator and even look-n-type app that works like a backup inverse camera, there is quite a bit there that won’t be found on the other phones. I’ll review those in more detail in another segment. Conclusion So for a quick comparison: If you want a phone that is super thin, light and is core reference of a Windows Phone 7 – Samsung Focus it is. If you want a great phone with solid secure feel, real keyboard, media features - the hands down winner is LG Quantum.   You can pick up the LG Quantum at AT&T in US and worldwide as LG Optimus 7Q.   Final thought: I have not had SmartPhone that I felt was a reliable trusty primary communication device since Samsung BlackJack II, this time the LG got the crown.   [ Disclosure: Phone was provided to me free of charge. That has been the case for all of my phones for years, nothing new - I get them all. ]

  Read the article

• Infiniband: a highperformance network fabric - Part I

  - by Karoly Vegh

  Introduction:At the OpenWorld this year I managed to chat with interesting people again - one of them answering Infiniband deepdive questions with ease by coffee turned out to be one of Oracle's IB engineers, Ted Kim, who actually actively participates in the Infiniband Trade Association and integrates Oracle solutions with this highspeed network. This is why I love attending OOW. He granted me an hour of his time to talk about IB. This post is mostly based on that tech interview.Start of the actual post: Traditionally datatransfer between servers and storage elements happens in networks with up to 10 gigabit/seconds or in SANs with up to 8 gbps fiberchannel connections. Happens. Well, data rather trickles through.But nowadays data amounts grow well over the TeraByte order of magnitude, and multisocket/multicore/multithread Servers hunger data that these transfer technologies just can't deliver fast enough, causing all CPUs of this world do one thing at the same speed - waiting for data. And once again, I/O is the bottleneck in computing. FC and Ethernet can't keep up. We have half-TB SSDs, dozens of TB RAM to store data to be modified in, but can't transfer it. Can't backup fast enough, can't replicate fast enough, can't synchronize fast enough, can't load fast enough. The bad news is, everyone is used to this, like back in the '80s everyone was used to start compile jobs and go for a coffee. Or on vacation. The good news is, there's an alternative. Not so-called "bleeding-edge" 8gbps, but (as of now) 56. Not layers of overhead, but low latency. And it is available now. It has been for a while, actually. Welcome to the world of Infiniband. Short history:Infiniband was born as a result of joint efforts of HPAQ, IBM, Intel, Sun and Microsoft. They planned to implement a next-generation I/O fabric, in the 90s. In the 2000s Infiniband (from now on: IB) was quite popular in the high-performance computing field, powering most of the top500 supercomputers. Then in the middle of the decade, Oracle realized its potential and used it as an interconnect backbone for the first Database Machine, the first Exadata. Since then, IB has been booming, Oracle utilizes and supports it in a large set of its HW products, it is the backbone of the famous Engineered Systems: Exadata, SPARC SuperCluster, Exalogic, OVCA and even the new DB backup/recovery box. You can also use it to make servers talk highspeed IP to eachother, or to a ZFS Storage Appliance. Following Oracle's lead, even IBM has jumped the wagon, and leverages IB in its PureFlex systems, their first InfiniBand Machines.IB Structural Overview: If you want to use IB in your servers, the first thing you will need is PCI cards, in IB terms Host Channel Adapters, or HCAs. Just like NICs for Ethernet, or HBAs for FC. In these you plug an IB cable, going to an IB switch providing connection to other IB HCAs. Of course you're going to need drivers for those in your OS. Yes, these are long-available for Solaris and Linux. Now, what protocols can you talk over IB? There's a range of choices. See, IB isn't accepting package loss like Ethernet does, and hence doesn't need to rely on TCP/IP as a workaround for resends. That is, you still can run IP over IB (IPoIB), and that is used in various cases for control functionality, but the datatransfer can run over more efficient protocols - like native IB. About PCI connectivity: IB cards, as you see are fast. They bring low latency, which is just as important as their bandwidth. Current IB cards run at 56 gbit/s. That is slightly more than double of the capacity of a PCI Gen2 slot (of ~25 gbit/s). And IB cards are equipped usually with two ports - that is, altogether you'd need 112 gbit/s PCI slots, to be able to utilize FDR IB cards in an active-active fashion. PCI Gen3 slots provide you with around ~50gbps. This is why the most IB cards are configured in an active-standby way if both ports are used. Once again the PCI slot is the bottleneck. Anyway, the new Oracle servers are equipped with Gen3 PCI slots, an the new IB HCAs support those too. Oracle utilizes the QDR HCAs, running at 40gbp/s brutto, which translates to a 32gbp/s net traffic due to the 10:8 signal-to-data information ratio. Consolidation techniques: Technology never stops to evolve. Mellanox is working on the 100 gbps (EDR) version already, which will be optical, since signal technology doesn't allow EDR to be copper. Also, I hear you say "100gbps? I will never use/need that much". Are you sure? Have you considered consolidation scenarios, where (for example with Oracle Virtual Network) you could consolidate your platform to a high densitiy virtualized solution providing many virtual 10gbps interfaces through that 100gbps? Technology never stops to evolve. I still remember when a 10mbps network was impressively fast. Back in those days, 16MB of RAM was a lot. Now we usually run servers with around 100.000 times more RAM. If network infrastrucure speends could grow as fast as main memory capacities, we'd have a different landscape now :) You can utilize SRIOV as well for consolidation. That is, if you run LDoms (aka Oracle VM Server for SPARC) you do not have to add physical IB cards to all your guest LDoms, and you do not need to run VIO devices through the hypervisor either (avoiding overhead). You can enable SRIOV on those IB cards, which practically virtualizes the PCI bus, and you can dedicate Physical- and Virtual Functions of the virtualized HCAs as native, physical HW devices to your guests. See Raghuram's excellent post explaining SRIOV. SRIOV for IB is supported since LDoms 3.1.  This post is getting lengthier, so I will rename it to Part I, and continue it in a second post. 

  Read the article

• Access Services in SharePoint Server 2010

  - by Wayne

  Another SharePoint Server 2010 feature which cannot go unnoticed is the Access Services. Access Services is a service in SharePoint Server 2010 that allows administrators to view, edit, and configure a Microsoft access application within a Web Browser. Access Services settings support backup and recovery, regardless of whether there is a UI setting in Central Administration. However, backup and recovery only apply to service-level and administrative-level settings; end-user content from the Access application is not backed up as part of this process. Access Services has Windows PowerShell functionality that can be used to provide the service that uses settings from a previous backup; configure and manage macro and query setting; manage and configure session management; and configure all the global settings of the service. Key Benefits of SharePoint Server Access Services Easier Access to right tools: The enhanced, customizable Ribbon in Access 2010 makes it easy to uncover more commands so you can focus on the end product. The new Microsoft Office BackstageTM view is yet another feature that can help you easily analyze and document your database, share, publish, and customize your Access 2010 experience, all from one convenient location. Helps build database effortlessly and quickly: Out-of-the box templates and reusable components make Access Services the fastest, simplest database solution available. It helps find new pre-built templates which you can start using without customization or select templates created by your peers in the Access online community and customize them to meet your needs. It builds your databases with new modular components. New Application Parts enable you to add a set of common Access components, such as a table and form for task management, to your database in a few simple clicks. Database navigation is now simplified. It creates Navigation Forms and makes your frequently used forms and reports more accessible without writing any code or logic. Create Impactful forms and reports: Whether it's an inventory of your assets or customer sales database, Access 2010 brings the innovative tools you'd expect from Microsoft Office. Access Services easily spot trends and add emphasis to your data. It quickly create coordinating database forms and reports and bring the Web into your database. Obtain a centralized landing pad for your data: Access 2010 offers easy ways to bring your data together and help increase work quality. New technologies help break down barriers so you can share and work together on your databases, making you or your team more efficient and productive. Add automation and complex expressions: If you need a more robust database design, such as preventing record deletion if a specific condition is met or if you need to create calculations to forecast your budget, Access 2010 empowers you to be your own developer. The enhanced Expression Builder greatly simplifies your expression building experience with IntelliSense®. With the revamped Macro Designer, it's now even easier for you to add basic logic to your database. New Data Macros allow you to attach logic to your data, centralizing the logic on the table, not the objects that update your data. Key features of Access Services 2010 - Access database content through a Web browser: Newly added Access Services on Microsoft SharePoint Server 2010 enables you to make your databases available on the Web with new Web databases. Users without an Access client can open Web forms and reports via a browser and changes are automatically synchronized. - Simplify how you access the features you need: The Ribbon, improved in Access 2010, helps you access commands even more quickly by enabling you to customize or create your own tabs. The new Microsoft Office Backstage view replaces the traditional File menu to provide one central, organized location for all of your document management tasks. - Codeless navigation: Use professional looking web-like navigation forms to make frequently used forms and reports more accessible without writing any code or logic. - Easily reuse Access items in other databases: Use Application Parts to add pre-built Access components for common tasks to your database in a few simple clicks. You can also package common database components, such as data entry forms and reports for task management, and reuse them across your organization or other databases. - Simplified formatting: By using Office themes you can create coordinating professional forms and reports across your database. Simply select a familiar and great looking Office theme, or design your own, and apply it to your database. Newly created Access objects will automatically match your chosen theme.

  Read the article

• Writing an ASP.Net Web based TFS Client

  - by Glav

  So one of the things I needed to do was write an ASP.Net MVC based application for our senior execs to manage a set of arbitrary attributes against stories, bugs etc to be able to attribute whether the item was related to Research and Development, and if so, what kind. We are using TFS Azure and don’t have the option of custom templates. I have decided on using a string based field within the template that is not very visible and which we don’t use to write a small set of custom which will determine the research and development association. However, this string munging on the field is not very user friendly so we need a simple tool that can display attributes against items in a simple dropdown list or something similar. Enter a custom web app that accesses our TFS items in Azure (Note: We are also using Visual Studio 2012) Now TFS Azure uses your Live ID and it is not really possible to easily do this in a server based app where no interaction is available. Even if you capture the Live ID credentials yourself and try to submit them to TFS Azure, it wont work. Bottom line is that it is not straightforward nor obvious what you have to do. In fact, it is a real pain to find and there are some answers out there which don’t appear to be answers at all given they didn’t work in my scenario. So for anyone else who wants to do this, here is a simple breakdown on what you have to do: Go here and get the “TFS Service Credential Viewer”. Install it, run it and connect to your TFS instance in azure and create a service account. Note the username and password exactly as it presents it to you. This is the magic identity that will allow unattended, programmatic access. Without this step, don’t bother trying to do anything else. In your MVC app, reference the following assemblies from “C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ReferenceAssemblies\v2.0”: Microsoft.TeamFoundation.Client.dll Microsoft.TeamFoundation.Common.dll Microsoft.TeamFoundation.VersionControl.Client.dll Microsoft.TeamFoundation.VersionControl.Common.dll Microsoft.TeamFoundation.WorkItemTracking.Client.DataStoreLoader.dll Microsoft.TeamFoundation.WorkItemTracking.Client.dll Microsoft.TeamFoundation.WorkItemTracking.Common.dll If hosting this in Internet Information Server, for the application pool this app runs under, you will need to enable 32 Bit support. You also have to allow the TFS client assemblies to store a cache of files on your system. If you don’t do this, you will authenticate fine, but then get an exception saying that it is unable to access the cache at some directory path when you query work items. You can set this up by adding the following to your web.config, in the <appSettings> element as shown below: <appSettings> <!-- Add reference to TFS Client Cache --> <add key="WorkItemTrackingCacheRoot" value="C:\windows\temp" /> </appSettings> With all that in place, you can write the following code: var token = new Microsoft.TeamFoundation.Client.SimpleWebTokenCredential("{you-service-account-name", "{your-service-acct-password}"); var clientCreds = new Microsoft.TeamFoundation.Client.TfsClientCredentials(token); var currentCollection = new TfsTeamProjectCollection(new Uri(“https://{yourdomain}.visualstudio.com/defaultcollection”), clientCreds); TfsConfigurationServercurrentCollection.EnsureAuthenticated(); In the above code, not the URL contains the “defaultcollection” at the end of the URL. Obviously replace {yourdomain} with whatever is defined for your TFS in Azure instance. In addition, make sure the service user account and password that was generated in the first step is substituted in here. Note: If something is not right, the “EnsureAuthenticated()” call will throw an exception with the message being you are not authorised. If you forget the “defaultcollection” on the URL, it will still fail but with a message saying you are not authorised. That is, a similar but different exception message. And that is it. You can then query the collection using something like: var service = currentCollection.GetService<WorkItemStore>(); var proj = service.Projects[0]; var allQueries = proj.StoredQueries; for (int qcnt = 0; qcnt < allQueries.Count; qcnt++) {     var query = allQueries[qcnt];     var queryDesc = string.format(“Query found named: {0}”,query.Name); } You get the idea. If you search around, you will find references to the ServiceIdentityCredentialProvider which is referenced in this article. I had no luck with this method and it all looked too hard since it required an extra KB article and other magic sauce. So I hope that helps. This article certainly would have helped me save a boat load of time and frustration.

  Read the article

• SQLAuthority News – A Conversation with an Old Friend – Sri Sridharan

  - by pinaldave

  Sri Sridharan is my old friend and we often talk on GTalk. The subject varies from Life in India/USA, movies, musics, and of course SQL. We have our differences when we talk about food or movie but we always agree when we talk about SQL. Yesterday while chatting with him we talked about SQLPASS and the conversation lasted for a long time. Here is the conversation between us on GTalk. I have removed a few of the personal talks and formatted into paragraphs as GTalk often shows stuff out of formatting. Pinal: Sri, Congrats on running for the PASS BoD again. You were so close last year. What made you decide to run again this year? Sri: Thank you Pinal for your leadership in the PASS India Community and all the things you do out there. After coming so close last year, there was no doubt in my mind that I will run again. I was truly humbled by the support I got from the community. Growing up in India for over 25 years, you are brought up in a very competitive part of the world. Right from the pressure of staying in the top of the class from kindergarten to your graduation, the relentless push from your parents about studying and getting good grades (and nothing else matters), you land up essentially living in a pressure cooker. To survive that relentless pressure, you need to have a thick skin, ability to stand up for who you really are , what you want to accomplish and in the process stay true those values. I am striving for a greater cause, to make PASS an organization that can help people with their SQL Server careers, to make PASS relevant to its chapter members, to make PASS an organization that every SQL professional in the world wants to be connected with. Just because I did not get elected or appointed last year does not mean that these causes are not worth fighting. Giving up upon failing the first time is simply not in me. If I did that, what message would I send to those who voted for me? What message would I send to my kids? Pinal: As someone who has such strong roots in India, what can the Indian PASS Community expect from you? Sri: First of all, I think fostering a regional leadership is something PASS must encourage as part of its global growth plan. For PASS global being able to understand all the issues in a region of the world and make sound decisions will be a tough thing to do on a continuous basis. I expect people like you, chapter leaders, regional mentors, MVPs of the region start playing a bigger role in shaping the next generation of PASS. That is something I said in my campaign and I still stand by it. I would like to see growth in the number of chapters in India. The current count does not truly represent the full potential of that region. I was pretty thrilled to see the Bangalore SQLSaturday happen early this year. I would like to see more of SQLSaturday events, at least in the major metro cities. I know the issues in India are very different from the rest of the world. So the formula needs to be tweaked a little for it to work better in India. Once the SQLSaturday model is vetted out, maybe there could be enough justification to have SQLRally India. PASS needs to have a premier SQL event in that region. Going to USA or Europe for that matter is incredibly hard due to VISA issues etc. So this could be a case of where PASS comes closer to where the community is. Pinal: What portfolio would take on if you are elected to the PASS Board? Sri: There are some very strong folks on the PASS Board today. The President discusses the portfolios with the group and makes the final call on the portfolios. I am also a fan of having a team associated with the portfolios. In that case, one person is the primary for a portfolio but secondary on a couple of other portfolios. This way people on the board have a direct vested interest in a few portfolios. Personally, I know I would these portfolios good justice – Chapters, Global Growth and Events (SQLSat, SQLRally). I would try to see if we can get a director to focus on Volunteers.  To me that is very critical for growth in the international regions. Pinal: This is an interesting conversation with you Sri. I know you so long time but this is indeed inspiring to many. India is a big country and we appreciate your thoughts. Sri: Thank you very much for taking time to chat with me today. Cheers. There are pretty strong candidates for SQLPASS Board of Elections this year. I know all of them in person and honestly it is going to be extremely difficult to not to vote for anybody. I am indeed in a crunch right now how to pick one over another. Though the choice is difficult, I encourage you to vote for them. I am extremely confident that the new board of directors will all have the same goal – Better SQL Server Community. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, DBA, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• To Bit or Not To Bit

  - by Johnm

  'Twas a long day of troubleshooting and firefighting and now, with most of the office vacant, you face a blank scripting window to create a new table in his database. Many questions circle your mind like dirty water gurgling down the bathtub drain: "How normalized should this table be?", "Should I use an identity column?", "NVarchar or Varchar?", "Should this column be NULLABLE?", "I wonder what apple blue cheese bacon cheesecake tastes like?" Well, there are times when the mind goes it's own direction. A Bit About Bit At some point during your table creation efforts you will encounter the decision of whether to use the bit data type for a column. The bit data type is an integer data type that recognizes only the values of 1, 0 and NULL as valid. This data type is often utilized to store yes/no or true/false values. An example of its use would be a column called [IsGasoline] which would be intended to contain the value of 1 if the row's subject (a car) had a gasoline engine and a 0 if the subject did not have a gasoline engine. The bit data type can even be found in some of the system tables of SQL Server. For example, the sysssispackages table in the msdb database which contains SQL Server Integration Services Package information for the packages stored in SQL Server. This table contains a column called [IsEncrypted]. A value of 1 indicates that the package has been encrypted while the value of 0 indicates that it is not. I have learned that the most effective way to disperse the crowd that surrounds the office coffee machine is to engage into SQL Server debates. The bit data type has been one of the most reoccurring, as well as the most enjoyable, of these topics. It contains a practical side and a philosophical side. Practical Consideration This data type certainly has its place and is a valuable option for database design; but it is often used in situations where the answer is really not a pure true/false response. In addition, true/false values are not very informative or scalable. Let's use the previously noted [IsGasoline] column for illustration. While on the surface it appears to be a rather simple question when evaluating a car: "Does the car have a gasoline engine?" If the person entering data is entering a row for a Jeep Liberty, the response would be a 1 since it has a gasoline engine. If the person is entering data is entering a row for a Chevrolet Volt, the response would be a 0 since it is an electric engine. What happens when a person is entering a row for the gasoline/electric hybrid Toyota Prius? Would one person's conclusion be consistent with another person's conclusion? The argument could be made that the current intent for the database is to be used only for pure gasoline and pure electric engines; but this is where the scalability issue comes into play. With the use of a bit data type a database modification and data conversion would be required if the business decided to take on hybrid engines. Whereas, alternatively, if the int data type were used as a foreign key to a reference table containing the engine type options, the change to include the hybrid option would only require an entry into the reference table. Philosophical Consideration Since the bit data type is often used for true/false or yes/no data (also called Boolean) it presents a philosophical conundrum of what to do about the allowance of the NULL value. The inclusion of NULL in a true/false or yes/no response simply violates the logical principle of bivalence which states that "every proposition is either true or false". If NULL is not true, then it must be false. The mathematical laws of Boolean logic support this concept by stating that the only valid values of this scenario are 1 and 0. There is another way to look at this conundrum: NULL is also considered to be the absence of a response. In other words, it is the equivalent to "undecided". Anyone who watches the news can tell you that polls always include an "undecided" option. This could be considered a valid option in the world of yes/no/dunno. Through out all of these considerations I have discovered one absolute certainty: When you have found a person, or group of persons, who are willing to entertain a philosophical debate of the bit data type, you have found some true friends.

  Read the article

• The Arab HEUG is now a reality, and other random thoughts

  - by user9147039

  I just returned from Doha, Qatar where the first of its kind HEUG (Higher Education User Group) meeting for institutions in the Middle East and North Africa was held at Qatar University and jointly hosted by Damman University from Saudi Arabia. Over 80 delegates attended including representation from education institutions in Oman, Saudi Arabia, Lebanon, and Qatar. There are many other regional HEUG organizations in place (in Australia/New Zealand, APAC, EMEA, as well as smaller regional HEUG’s in the Netherlands, South Africa, and in regions of the US), but it was truly an accomplishment to see this Middle East/North Africa group organize and launch their chapter with a meeting of this quality. To be known as the Arab HEUG going forward, I am excited about the prospects for sharing between the institutions and for the growth of Oracle solutions in the region. In particular the hosts for the event (Qatar University) did a masterful job with logistics and organization, and the quality of the event was a testament to their capabilities. Among the more interesting and enlightening presentations I attended were one from Dammam University on the lessons learned from their implementation of Campus Solutions and transition off of Banner, as well as the use by Qatar University E-business Suite for grants management (both pre-and post-award). The most notable fact coming from this latter presentation was the fit (89%) of e-Business Suite Grants to the university’s requirements. In a few weeks time we will be convening the 5th meeting of the Oracle Education & Research Industry Strategy Council in Redwood Shores (5th since my advent into my current role). The main topics of discussion will be around our Higher Education Applications Strategy for the future (including cloud approaches to ERP (HCM, Finance, and Student Information Systems), how some cases studies on the benefits of leveraging delivered functionality and extensibility in the software (versus customization). On the second day of the event we will turn our attention to Oracle in Research and also budgeting and planning in higher education. Both of these sessions will include significant participation from council members in the form of panel discussions. Our EVP’s for Systems (John Fowler) and for Global Cloud Services and North America application sales (Joanne Olson) will join us for the discussion. I recently read a couple of articles that were surprising to me. The first was from Inside Higher Ed on October 15 entitled, “As colleges prepare for major software upgrades, Kuali tries to woo them from corporate vendors.” It continues to disappointment that after all this time we are still debating whether it is better to build enterprise software through open or community source initiatives when fully functional, flexible, supported, and widely adopted options exist in the marketplace. Over a decade or more ago when these solutions were relatively immature and there was a great deal of turnover in the market I could appreciate the initiatives like Kuali. But let’s not kid ourselves – the real objective of this movement is to counter a perceived predatory commercial software industry. Again, when commercial solutions are deployed as written without significant customization, and standard business processes are adopted, the cost of these solutions (relative to the value delivered) is quite low, and certain much lower than the massive investment (and risk) in in-house developers to support a bespoke community source system. In this era of cost pressures in education and the need to refocus resources on teaching, learning, and research, I believe it’s bordering on irresponsible to continue to pursue open-source ERP. Many of the adopter’s total costs are staggering and have little to show for their efforts and expended resources. The second article was recently in the Chronicle of Higher Education and was entitled “’Big Data’ Is Bunk, Obama Campaign’s Tech Guru Tells University Leaders.” This one was so outrageous I almost don’t want to legitimize it by referencing it here. In the article the writer relays statements made by Harper Reed, President Obama’s former CTO for his 2012 re-election campaign, that big data solutions in education have no relevance and are akin to snake oil. He goes on to state that while he’s a fan of data-driven decision making in education, most of the necessary analysis can be accomplished in Excel spreadsheets. Yeah… right. This is exactly what ails education (higher education in particular). Dozens of shadow and siloed systems running on spreadsheets with limited-to-no enterprise wide initiatives to harness the data-rich environment that is a higher ed institution and transform the data into useable information. I’ll grant Mr. Reed that “Big Data” is overused and hackneyed, but imperatives like improving student success in higher education are classic big data problems that data-mining and predictive analytics can address. Further, higher ed need to be producing a massive amount more data scientists and analysts than are currently in the pipeline, to further this discipline and application of these tools to many many other problems across multiple industries.

  Read the article

• TFS API Add Favorites programmatically

  - by Tarun Arora

  01 – What are we trying to achieve? In this blog post I’ll be showing you how to add work item queries as favorites, it is also possible to use the same technique to add build definition as favorites. Once a shared query or build definition has been added as favorite it will show up on the team web access.  In this blog post I’ll be showing you a work around in the absence of a proper API how you can add queries to team favorites. 02 – Disclaimer There is no official API for adding favorites programmatically. In the work around below I am using the Identity service to store this data in a property bag which is used during display of favorites on the team web site. This uses an internal data structure that could change over time, there is no guarantee about the key names or content of the values. What is shown below is a workaround for a missing API. 03 – Concept There is no direct API support for favorites, but you could work around it using the identity service in TFS.  Favorites are stored in the property bag associated with the TeamFoundationIdentity (either the ‘team’ identity or the users identity depending on if these are ‘team’ or ‘my’ favorites).  The data is stored as json in the property bag of the identity, the key being prefixed by ‘Microsoft.TeamFoundation.Framework.Server.IdentityFavorites’. References - Microsoft.TeamFoundation.WorkItemTracking.Client - using Microsoft.TeamFoundation.Client; - using Microsoft.TeamFoundation.Framework.Client; - using Microsoft.TeamFoundation.Framework.Common; - using Microsoft.TeamFoundation.ProcessConfiguration.Client; - using Microsoft.TeamFoundation.Server; - using Microsoft.TeamFoundation.WorkItemTracking.Client; Services - IIdentityManagementService2 - TfsTeamService - WorkItemStore 04 – Solution Lets start by connecting to TFS programmatically // Create an instance of the services to be used during the program private static TfsTeamProjectCollection _tfs; private static ProjectInfo _selectedTeamProject; private static WorkItemStore _wis; private static TfsTeamService _tts; private static TeamSettingsConfigurationService _teamConfig; private static IIdentityManagementService2 _ids; // Connect to TFS programmatically public static bool ConnectToTfs() { var isSelected = false; var tfsPp = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPp.ShowDialog(); _tfs = tfsPp.SelectedTeamProjectCollection; if (tfsPp.SelectedProjects.Any()) { _selectedTeamProject = tfsPp.SelectedProjects[0]; isSelected = true; } return isSelected; } Lets get all the work item queries from the selected team project static readonly Dictionary<string, string> QueryAndGuid = new Dictionary<string, string>(); // Get all queries and query guid in the selected team project private static void GetQueryGuidList(IEnumerable<QueryItem> query) { foreach (QueryItem subQuery in query) { if (subQuery.GetType() == typeof(QueryFolder)) GetQueryGuidList((QueryFolder)subQuery); else { QueryAndGuid.Add(subQuery.Name, subQuery.Id.ToString()); } } }   Pass the name of a valid Team in your team project and a name of a valid query in your team project. The team details will be extracted using the team name and query GUID will be extracted using the query name. These details will be used to construct the key and value that will be passed to the SetProperty method in the Identity service.           Key           “Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..<TeamProjectURI>.<TeamId>.WorkItemTracking.Queries.<newGuid1>”           Value           "{"data":"<QueryGuid>","id":"<NewGuid1>","name":"<QueryKey>","type":"Microsoft.TeamFoundation.WorkItemTracking.QueryItem”}"           // Configure a Work Item Query for the given team private static void ConfigureTeamFavorites(string teamName, string queryName) { _ids = _tfs.GetService<IIdentityManagementService2>(); var g = Guid.NewGuid(); var guid = string.Empty; var teamDetail = _tts.QueryTeams(_selectedTeamProject.Uri).FirstOrDefault(t => t.Name == teamName); foreach (var q in QueryAndGuid.Where(q => q.Key == queryName)) { guid = q.Value; } if(guid == string.Empty) { Console.WriteLine("Query '{0}' - Not found!", queryName); return; } var key = string.Format( "Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..{0}.{1}.WorkItemTracking.Queries{2}", new Uri(_selectedTeamProject.Uri).Segments.LastOrDefault(), teamDetail.Identity.TeamFoundationId, g); var value = string.Format( @"{0}""data"":""{1}"",""id"":""{2}"",""name"":""{3}"",""type"":""Microsoft.TeamFoundation.WorkItemTracking.QueryItem""{4}", "{", guid, g, QueryAndGuid.FirstOrDefault(q => q.Value==guid).Key, "}"); teamDetail.Identity.SetProperty(IdentityPropertyScope.Local, key, value); _ids.UpdateExtendedProperties(teamDetail.Identity); Console.WriteLine("{0}Added Query '{1}' as Favorite", Environment.NewLine, queryName); }   If you have any questions or suggestions leave a comment. Enjoy!

  Read the article

• WebLogic JDBC Use of Oracle Wallet for SSL

  - by Steve Felts

  Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

  Read the article

< Previous Page | 673 674 675 676 677 678 679 680 681 682 683 684  | Next Page >