Search Results

Search found 28620 results on 1145 pages for 'ubuntu newb'.

Page 714/1145 | < Previous Page | 710 711 712 713 714 715 716 717 718 719 720 721  | Next Page >

• How to check if a Webcam is broken?

  - by user84812

  I just bought an Acer Aspire 3830TG, it comes with an integrated 1.3M HD Webcam. Before buying it i tried with a bootable Lubuntu usb stick, everything worked well except for the webcam, which i thought I had to tweak. The thing is that it seems the camera should work with no problems in ubuntu. The driver is detected, I try dmesg | grep uvcvideo and the output is [ 12.226174] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) [ 12.245553] usbcore: registered new interface driver uvcvideo I've also tried using different software (guvcview is black when camera output is MJPG and turns to funny colors when YU12 or YV12, cheese is always black, camorama is always with funny colors...). I should have checked that it was working properly with the default os (windows) but now it's too late for that. I even booted with a official Ubuntu Quantal distro from the usb pen, and the results are the same. so, my question is: is there any way to check that the camera is righmt or broken? So, if it's broken, at least i can go to the shop, show them that it's really broken and get an external webcam for free, or st like that. cheers. UPDATE 1 Thanks, jrp. I run sudo lsinput, and the output info about my video is the following: /dev/input/event6 bustype : BUS_USB vendor : 0x58f product : 0xb002 version : 2 name : "1.3M HD WebCam" phys : "usb-0000:00:1a.0-1.3/button" bits ev : EV_SYN EV_KEY /dev/input/event7 bustype : BUS_HOST vendor : 0x0 product : 0x6 version : 0 name : "Video Bus" phys : "LNXVIDEO/video/input0" bits ev : EV_SYN EV_KEY With this info, i'm not pretty sure about running the luvcview command. If I run luvcview -d /dev/video0 -L, the output is the following: SDL information: Video driver: x11 A window manager is available Device information: Device path: /dev/video0 { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/7, 1/5, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, if i run luvcview by itself, the image is funny (blue and red colors, mainly, with myself in negative state). tx

  Read the article

• Help me solve my problem with NPR Media Player

  - by Calcipher

  First of, let me apologize for this getting a bit technical. Several weeks ago, I found that while using NPR's media player (e.g. click on 'Listen to the Show' - this is what I've been using as a test) the stream would suddenly halt after a minute or three. I could not get the stream to restart without reloading the page. Now, I assumed this was an issue with NPR's player and Linux (or just a bug in their stuff in general) so I began to dig, the following is what I have tried to date (please note, the tldr; option is to skip to the latest thing as I think I know what is causing the problem). Note: All testing has been done, for consistency purposes, on a clean install of Chromium with no pluggins running. My machine is Ubuntu 10.10x64. First thing I always try, I disabled all firewall stuff on the system (UFW, default deny all, allow ssh). No change, firewall back up for all additional tests unless otherwise noted. In any case, UFW is stateful, so connections it started on a non-specified on different ports will continue to work. I deleted my ~/.macromeda and ~/.adobe folders, restarted (just to be sure) and tried. Program still froze. I decided the problem might be with my install of flash, so I purged the version I had (and the home folders again). I installed the x64 version of flash from a PPA. This had no effect. I decided that the problem might be with the version of flash, so I purged the x64 version and installed the standard x32 version that comes with Ubuntu. No luck. Back to the x64 version for consistency, I decided to set up a 64-bit mini 'clone' of my system in VirtualBox. I was able to run the media player with no problem. I rsynced (in archive mode) my home directory from my real machine to the virtual machine (with bridged networking, so it was fully visible on the network). I also used a few tricks to install ALL of the same software (and repositories) from the real machine to the virtual machine. I was still able to listen to the player. I decided that the problem was with my install (after all, it had gone through two major version upgrades). As I have /home/ on a separate partition it was easy to reinstall and use the same trick from #6 to have my system up and running again within about an hour. I continue to have issues with the NPR Media Player. By this point the weekend had come. At work, I use a wired connection while at home I use a wireless connection. For some reason I forgot that I was having problems and used the NPR Media Player over the weekend. Low and behold it worked just fine at home on wireless (note: for various reasons, I could not test this on wired at home). Following from #6, I decided that the problem was either something with the network at work or still something with my account. As the latter was easier to test, I created a new account on my system and used that at work. The Media Player worked. At a loss, I decided to watch the traffic with tshark (the text based brother of wireshark) - X's to protect the innocent, I am the XXX.24.200.XXX: sudo tshark -i eth0 -p -t a -R "ip.addr == XXX.24.200.XXX && ip.addr == XXX.166.98.XXX" As you would expect, there were tons and tons of packets, but each and every time the player froze, this is what I got 08:42:20.679200 XXX.166.98.XXX - XXX.24.200.XXX TCP macromedia-fcs 56371 [PSH, ACK] Seq=817686 Ack=6 Win=65535 Len=1448 TSV=495713325 TSER=396467 08:42:20.718602 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396475 TSER=495713325 08:42:21.050183 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713362 TSER=396475 08:42:21.050221 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396508 TSER=495713362 08:42:21.680548 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713425 TSER=396508 08:42:21.680605 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396571 TSER=495713425 08:42:22.910354 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713548 TSER=396571 08:42:22.910400 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396694 TSER=495713548 08:42:25.340458 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713791 TSER=396694 08:42:25.340517 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396937 TSER=495713791 08:42:30.170698 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495714274 TSER=396937 08:42:30.170746 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=397420 TSER=495714274 08:42:39.801738 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495715237 TSER=397420 08:42:39.801784 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=398383 TSER=495715237 08:42:59.032648 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495717160 TSER=398383 08:42:59.032696 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400306 TSER=495717160 08:43:00.267721 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [FIN, ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400430 TSER=495717160 08:43:00.267827 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [RST, ACK] Seq=7 Ack=819134 Win=65535 Len=0 TSV=400430 TSER=495717160 So, as you can see, my machine is sending out a ZeroWindow packet (which I think means some buffer or another filled up) which causes the Media Player to halt (unfortunately, terminally - no controls on it really do anything anymore). Any ideas, at all, what would cause this? Why only on eth0 under my main account?

  Read the article

• Stuck removing ffmpeg from system due to package problems

  - by Michiel

  I'd be very grateful to get a bit of support on the following situation: Using Ubuntu 12.04, and I used the PPA of Jon Severinson for ffmpeg. I had a problem playing movies with mplayer, so I decided to remove the PPA and try to use libav only after I read this article about libav vs ffmpeg. I first removed the PPA from the list, then apt-get update, etc. But I couldn't remove ffmpeg due to dependency-errors and got stuck in what seemed some kind of loop. Then I found a suggestion here. I followed the steps, and ended up force-removing libavcodec-extra-53. Because, apparently that was "what got stuff moving again". At the moment I can't. Now Ubuntu is reporting a broken package (BrokenCount 0). Errors: De afhankelijkheden van de volgende pakketten konden niet geïnstalleerd worden: audacious-plugins: Depends: audacious-plugins-data (= 3.2.1-4ubuntu1) maar 3.2.1-4ubuntu1 is geïnstalleerd Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libcurl3-gnutls (= 7.16.2-1) maar 7.22.0-3ubuntu4 is geïnstalleerd Depends: libgcc1 (= 1:4.1.1) maar 1:4.6.3-1ubuntu5 is geïnstalleerd Depends: libpulse0 (= 1:0.99.1) maar 1:1.1-0ubuntu15.1 is geïnstalleerd Depends: libstdc++6 (= 4.6) maar 4.6.3-1ubuntu5 is geïnstalleerd Depends: libwavpack1 (= 4.40.0) maar 4.60.1-2 is geïnstalleerd Depends: libxcomposite1 (= 1:0.3-1) maar 1:0.4.3-2build1 is geïnstalleerd Depends: zlib1g (= 1:1.1.4) maar 1:1.2.3.4.dfsg-3ubuntu4 is geïnstalleerd libavfilter-extra-2: Depends: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Depends: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libswresample-extra-0 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libswscale-extra-2 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd libavformat-extra-53: Depends: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Depends: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd Depends: libavutil-extra-51 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd libk3b6-extracodecs: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.14) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libkdecore5 (= 4:4.4.4) maar 4:4.8.4a-0ubuntu0.2 is geïnstalleerd Depends: libkio5 (= 4:4.4.4) maar 4:4.8.4a-0ubuntu0.2 is geïnstalleerd Depends: libqtcore4 (= 4:4.7.0~beta1) maar 4:4.8.1-0ubuntu4.2 is geïnstalleerd Depends: libstdc++6 (= 4.1.1) maar 4.6.3-1ubuntu5 is geïnstalleerd libquicktime2: Depends: libavcodec-extra-53 (= 4:0.8~beta2-2) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8~beta2-2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd libxine1-ffmpeg: Depends: libavcodec-extra-53 (= 4:0.7.3-1) maar het is niet geïnstalleerd Depends: libavutil-extra-51 (= 4:0.7.3-1) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.4) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.7.3-1) maar het is niet geïnstalleerd Depends: libxine1-bin (= 1.1.20-2build1) maar 1.1.20-2build1 is geïnstalleerd mencoder: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd mplayer: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd vlc: Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) maar 2.0.3-0ubuntu0.12.04.1 is geïnstalleerd Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.15) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libfreetype6 (= 2.2.1) maar 2.4.8-1ubuntu2 is geïnstalleerd Depends: libgcc1 (= 1:4.1.1) maar 1:4.6.3-1ubuntu5 is geïnstalleerd Depends: libqtcore4 (= 4:4.8.0) maar 4:4.8.1-0ubuntu4.2 is geïnstalleerd Depends: libqtgui4 (= 4:4.7.0~beta1) maar 4:4.8.1-0ubuntu4.2 is geïnstalleerd Depends: libstdc++6 (= 4.6) maar 4.6.3-1ubuntu5 is geïnstalleerd Depends: zlib1g (= 1:1.2.3.3.dfsg) maar 1:1.2.3.4.dfsg-3ubuntu4 is geïnstalleerd vlc-nox: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.15) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libfontconfig1 (= 2.8.0) maar 2.8.0-3ubuntu9.1 is geïnstalleerd Depends: libfreetype6 (= 2.2.1) maar 2.4.8-1ubuntu2 is geïnstalleerd Depends: libgcc1 (= 1:4.1.1) maar 1:4.6.3-1ubuntu5 is geïnstalleerd Depends: libgnutls26 (= 2.12.6.1-0) maar 2.12.14-5ubuntu3.1 is geïnstalleerd Depends: libmpcdec6 (= 1:0.1~r435) maar 2:0.1~r459-1ubuntu1 is geïnstalleerd Depends: libncursesw5 (= 5.6+20070908) maar 5.9-4 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libsmbclient (= 3.0.24) maar 2:3.6.3-2ubuntu2.3 is geïnstalleerd Depends: libstdc++6 (= 4.6) maar 4.6.3-1ubuntu5 is geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libudev0 (= 147) maar 175-0ubuntu9.1 is geïnstalleerd Depends: libxml2 (= 2.7.4) maar 2.7.8.dfsg-5.1ubuntu4.1 is geïnstalleerd Depends: zlib1g (= 1:1.2.0.2) maar 1:1.2.3.4.dfsg-3ubuntu4 is geïnstalleerd xbmc-bin: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavfilter-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd And apt-get is reporting: root@LAPTOP:~# apt-get -f install Pakketlijsten worden ingelezen... Klaar Boom van vereisten wordt opgebouwd De status informatie wordt gelezen... Klaar Vereisten worden gecorrigeerd... mislukt. De volgende pakketten hebben niet-voldane vereisten: audacious-plugins : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd libavfilter-extra-2 : Vereisten: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Vereisten: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd libavformat-extra-53 : Vereisten: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Vereisten: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd libk3b6-extracodecs : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd libquicktime2 : Vereisten: libavcodec53 (= 4:0.8~beta2-2) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8~beta2-2) maar het is niet geïnstalleerd libxine1-ffmpeg : Vereisten: libavcodec53 (= 4:0.7.3-1) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.7.3-1) maar het is niet geïnstalleerd mencoder : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd mplayer : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd vlc : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd vlc-nox : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd xbmc-bin : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd E: Fout, pkgProblemResolver::Resolve maakte scheidingen aan, dit kan veroorzaakt worden door vastgehouden pakketten. E: Kan vereisten niet corrigeren How to proceed?? Thanks in advance, Michiel

  Read the article

• Hard drive mounted at / , duplicate mounted hard drive after using MountManager

  - by HellHarvest

  possible duplicate post I'm running 12.04 64bit. My system is a dual boot for both Ubuntu and Windows7. Both operating systems are sharing the drive named "Elements". My volume named "Elements" is a 1TB SATA NTFS hard drive that shows up twice in the side bar in nautilus. One of the icons is functional and even has the convenient "eject" icon next to it. Below is a picture of the left menu in Nautilus, with System Monitor-File Systems tab open on top of it. Can someone advise me about how to get rid of this extra icon? I think the problem is much more deep-rooted than just a GUI glitch on Nautilus' part. The other icon does nothing but spit out the following error when I click on it (image below). This only happened AFTER I tried using Mount Manager to automate mounting the drive at start up. I've already uninstalled Mount Manager, and restarted, but the problem didn't go away. The hard drive does mount automatically now, so I guess that's cool. But now, every time I boot up now and open Nautilus, BOTH of these icons appear, one of which is fictitious and useless. According to the image above and the outputs of several other commands, it appears to be mounted at / In which case, no matter where I am in Nautilus when I try to click on that icon, of course it will tell me that that drive is in use by another program... Nautilus. I'm afraid of trying to unmount this hard drive (sdb6) because of where it appears to be mounted. I'm kind of a noob, and I have this gut feeling that tells me trying to unmount a drive at / will destroy my entire file system. This fear was further strengthened by the output of "$ fsck" at the very bottom of this post. Error immediately below when that 2nd "Elements" hard drive is clicked in Nautilus: Unable to mount Elements Mount is denied because the NTFS volume is already exclusively opened. The volume may be already mounted, or another software may use it which could be identified for example by the help of the 'fuser' command. It's odd to me that that error message above claims that it's an NTFS volume when everything else tell me that it's an ext4 volume. The actual hard drive "Elements" is in fact an NTFS volume. Here's the output of a few commands and configuration files that may be of interest: $ fuser -a / /: 2120r 2159rc 2160rc 2172r 2178rc 2180rc 2188r 2191rc 2200rc 2203rc 2205rc 2206r 2211r 2212r 2214r 2220r 2228r 2234rc 2246rc 2249rc 2254rc 2260rc 2261r 2262r 2277rc 2287rc 2291rc 2311rc 2313rc 2332rc 2334rc 2339rc 2343rc 2344rc 2352rc 2372rc 2389rc 2422r 2490r 2496rc 2501rc 2566r 2573rc 2581rc 2589rc 2592r 2603r 2611rc 2613rc 2615rc 2678rc 2927r 2981r 3104rc 4156rc 4196rc 4206rc 4213rc 4240rc 4297rc 5032rc 7609r 7613r 7648r 9593rc 18829r 18833r 19776r $ sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb6 496G 366G 106G 78% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 791M 1.5M 790M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 672K 2.0G 1% /run/shm /dev/sda1 932G 312G 620G 34% /media/Elements /home/solderblob/.Private 496G 366G 106G 78% /home/solderblob /dev/sdb2 188G 100G 88G 54% /media/A2B24EACB24E852F /dev/sdb1 100M 25M 76M 25% /media/System Reserved $ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00093cab Device Boot Start End Blocks Id System /dev/sda1 2048 1953519615 976758784 7 HPFS/NTFS/exFAT Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d9b Device Boot Start End Blocks Id System /dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sdb2 206848 392378768 196085960+ 7 HPFS/NTFS/exFAT /dev/sdb3 392380414 1465147391 536383489 5 Extended /dev/sdb5 1456762880 1465147391 4192256 82 Linux swap / Solaris /dev/sdb6 392380416 1448374271 527996928 83 Linux /dev/sdb7 1448376320 1456758783 4191232 82 Linux swap / Solaris Partition table entries are not in disk order $ cat /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> UUID=77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 defaults 0 1 UUID=F6549CC4549C88CF /media/Elements ntfs-3g users 0 0 $ sudo blkid /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ sudo blkid -c /dev/null (appears to be exactly the same as above) /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ mount /dev/sdb6 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /media/Elements type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /home/solderblob/.Private on /home/solderblob type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=76a47b0175afa48d,ecryptfs_fnek_sig=391b2d8b155215f7) gvfs-fuse-daemon on /home/solderblob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=solderblob) /dev/sdb2 on /media/A2B24EACB24E852F type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) /dev/sdb1 on /media/System Reserved type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) $ ls -a . A2B24EACB24E852F Ubuntu 12.04.1 LTS amd64 .. Elements System Reserved $ cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=2013000k,nr_inodes=503250,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=809872k,mode=755 0 0 /dev/disk/by-uuid/77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 /dev/sda1 /media/Elements fuseblk rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 /home/solderblob/.Private /home/solderblob ecryptfs rw,relatime,ecryptfs_fnek_sig=391b2d8b155215f7,ecryptfs_sig=76a47b0175afa48d,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs 0 0 gvfs-fuse-daemon /home/solderblob/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/sdb2 /media/A2B24EACB24E852F fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sdb1 /media/System\040Reserved fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0 $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) /dev/sdb6 is mounted. WARNING!!! The filesystem is mounted. If you continue you ***WILL*** cause ***SEVERE*** filesystem damage. Do you really want to continue<n>? no check aborted.

  Read the article

• How can I keep the cpu temp low?

  - by Newton

  I have an HP pavilion dv7, I'm using ubuntu 12.04 so the overheating problem with sandybridge cpu is a lot better. However my laptop is still becoming too hot to keep on my legs. The problem is that the fan wait too much before starting, so the medium temp is too hight. When I'm using windows 7 the laptop is room-temperature cold, I've absolutely no problem. On windows the fan is always spinning very low & very silently so the heat is continuously removed, without reaching an unconfortable temp. How can I force the computer to act like that also on ubuntu? PS The bios can't let me control this kind of thing, and this is my experience with lm-sensors and fancontrol al@notebook:~$ sudo sensors-detect [sudo] password for al: # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Hewlett-Packard HP Pavilion dv7 Notebook PC (laptop) # Board: Hewlett-Packard 1800 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8518 Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Next adapter: i915 gmbus disabled (i2c-0) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus ssc (i2c-1) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOB (i2c-2) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus vga (i2c-3) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOA (i2c-4) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus panel (i2c-5) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 GPIOC (i2c-6) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus dpc (i2c-7) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOD (i2c-8) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpb (i2c-9) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOE (i2c-10) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus reserved (i2c-11) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpd (i2c-12) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOF (i2c-13) Do you want to scan it? (YES/no/selectively): y Next adapter: DPDDC-B (i2c-14) Do you want to scan it? (YES/no/selectively): y Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK al@notebook:~$ sudo /etc/init.d/module-init-tools restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop module-init-tools ; start module-init-tools. The restart(8) utility is also available. module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools restart stop: Unknown instance: module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools start module-init-tools stop/waiting al@notebook:~$ sudo pwmconfig # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Is my case too desperate?

  Read the article

• Network Access: I can't access 192.168.1.101 from 192.168.1.102.

  - by takpar

  Hi, I'm running Ubuntu 10.04 on my PC with IP 192.168.1.101. every thing work fine, e.g. my web server is running and I can see http://localhost/ or http://192.168.1.101 properly. But the problem is that I cannot see my PC from my laptop at 192.168.1.102 e.g. at my laptop http://192.168.1.101 gives Connection timed out in browser. or trying to telnet on any port leads to: telnet: Unable to connect to remote host: Connection timed out laptop is running a fresh install of Ubuntu as well and there is no setup for firewall stuff in both computers. PS: Both computers can ping each other well. The router is a cicso linksys wireless ADSL modem. Currently, I can connect to FTP server on the Windows running on 192.168.1.102 from 192.168.1.101 without problem. Theses are commands ran on my PC, 192.168.1.101: ifconfig: adp@adp-desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:e1:8e:cf inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::226:18ff:fee1:8ecf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1831935 errors:0 dropped:0 overruns:0 frame:0 TX packets:1493786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1996855925 (1.9 GB) TX bytes:215288238 (215.2 MB) Interrupt:27 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:951742 errors:0 dropped:0 overruns:0 frame:0 TX packets:951742 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:494351095 (494.3 MB) TX bytes:494351095 (494.3 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:46:c0:00:01 inet addr:192.168.91.1 Bcast:192.168.91.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:46:c0:00:08 inet addr:192.168.156.1 Bcast:192.168.156.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) port 80 is set to 0.0.0.0 well: adp@adp-desktop:~$ netstat -ln | grep 'LISTEN ' tcp 0 0 127.0.0.1:52815 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4559 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4369 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:7634 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5269 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5280 0.0.0.0:* LISTEN tcp 0 0 127.0.1.1:7777 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:33601 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5222 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp6 0 0 :::139 :::* LISTEN tcp6 0 0 ::1:631 :::* LISTEN tcp6 0 0 :::445 :::* LISTEN /etc/hosts.deny is empty: adp@adp-desktop:~$ cat /etc/hosts.deny # /etc/hosts.deny: list of hosts that are _not_ allowed to access the system. # See the manual pages hosts_access(5) and hosts_options(5). # # Example: ALL: some.host.name, .some.domain # ALL EXCEPT in.fingerd: other.host.name, .other.domain # # If you're going to protect the portmapper use the name "portmap" for the # daemon name. Remember that you can only use the keyword "ALL" and IP # addresses (NOT host or domain names) for the portmapper, as well as for # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8) # for further information. # # The PARANOID wildcard matches any host whose name does not match its # address. # # You may wish to enable this to ensure any programs that don't # validate looked up hostnames still leave understandable logs. In past # versions of Debian this has been the default. # ALL: PARANOID netstat -l: adp@adp-desktop:~$ netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:52815 *:* LISTEN tcp 0 0 *:hylafax *:* LISTEN tcp 0 0 *:www *:* LISTEN tcp 0 0 *:4369 *:* LISTEN tcp 0 0 localhost:7634 *:* LISTEN tcp 0 0 *:ftp *:* LISTEN tcp 0 0 *:xmpp-server *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 *:5280 *:* LISTEN tcp 0 0 adp-desktop:7777 *:* LISTEN tcp 0 0 *:33601 *:* LISTEN tcp 0 0 *:xmpp-client *:* LISTEN tcp 0 0 localhost:mysql *:* LISTEN tcp6 0 0 [::]:netbios-ssn [::]:* LISTEN tcp6 0 0 localhost:ipp [::]:* LISTEN tcp6 0 0 [::]:microsoft-ds [::]:* LISTEN udp 0 0 *:bootpc *:* udp 0 0 *:mdns *:* udp 0 0 *:47467 *:* udp 0 0 192.168.1.10:netbios-ns *:* udp 0 0 192.168.91.1:netbios-ns *:* udp 0 0 192.168.156.:netbios-ns *:* udp 0 0 *:netbios-ns *:* udp 0 0 192.168.1.1:netbios-dgm *:* udp 0 0 192.168.91.:netbios-dgm *:* udp 0 0 192.168.156:netbios-dgm *:* udp 0 0 *:netbios-dgm *:* raw 0 0 *:icmp *:* 7 netstat -rn: adp@adp-desktop:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.91.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 192.168.156.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 commands on the laptop, 192.168.1.102: ifconfig: root@fakeuser-laptop:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:33:a2:31:15 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth1 Link encap:Ethernet HWaddr 00:2d:d9:3e:1f:6c inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::21d:d9ff:fe3e:1f6c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5681 errors:0 dropped:0 overruns:0 frame:10313 TX packets:6717 errors:6 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4055251 (4.0 MB) TX bytes:779308 (779.3 KB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:206 errors:0 dropped:0 overruns:0 frame:0 TX packets:206 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15172 (15.1 KB) TX bytes:15172 (15.1 KB) netstat -rn: root@fakeuser-laptop:~# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

  Read the article

• Disk Drive not working

  - by user287681

  The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

  Read the article

• Wifi hotspot disconnected after some time

  - by Rohit Bansal

  I am trying to use my Ubuntu system as Wifi Hotspot, but for some reason Hotspot get disconnected on its own. Searching for the solution, I found this help : Why is my ethernet connection connecting and disconnecting repeatedly? Reading through the above article I used the following command sudo killall dnsmasq as a result I manage to establish hotspot for around 5-10 sec before getting disconnected as against immediately.... Here's the system log (in case needed) tail -f /var/log/syslog : Apr 1 23:31:42 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:31:42 NetworkManager[901]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Apr 1 23:31:42 dnsmasq[4159]: started, version 2.57 cachesize 150 Apr 1 23:31:42 dnsmasq[4159]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:31:42 dnsmasq-dhcp[4159]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:31:42 dnsmasq[4159]: reading /etc/resolv.conf Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.6.104#53 Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.100.40#53 Apr 1 23:31:42 dnsmasq[4159]: cleared cache Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) successful, device activated. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Apr 1 23:31:42 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:31:42 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Connection established at this point....now disconnecting after 10 sec... Apr 1 23:31:52 ntpdate[4194]: adjust time server 91.189.94.4 offset -0.011589 sec Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): IP6 addrconf timed out or failed. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Apr 1 23:32:01 NetworkManager[901]: <warn> dnsmasq died with signal 9 Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: activated -> failed (reason 'sharing-start-failed') [100 120 18] Apr 1 23:32:01 dnsmasq[4235]: started, version 2.57 cachesize 150 Apr 1 23:32:01 dnsmasq[4235]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:32:01 dnsmasq-dhcp[4235]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed for access point (Reppify Ubuntu) Apr 1 23:32:01 dnsmasq[4235]: reading /etc/resolv.conf Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.6.104#53 Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.100.40#53 Apr 1 23:32:01 dnsmasq[4235]: cleared cache Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed. Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): deactivating device (reason 'none') [0] Apr 1 23:32:01 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:32:01 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Apr 1 23:32:01 NetworkManager[901]: <error> [1333303321.565351] [nm-device-wifi.c:1815] nm_device_wifi_set_mode(): (wlan0): error setting mode 2

  Read the article

• Nvidia drivers don't work with mainline kernel

  - by dutchie

  I want to try some of the new features in the btrfs filesystem, and to do that I need to use a newer kernel than is included in Ubuntu 12.04. To do that, I have installed linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb, linux-headers-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb, and linux-image-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb from the mainline kernel download here. However, on rebooting into the 3.4 kernel, my desktop is stuck at a very low resolution and I cannot increase it to the full. This did happen when I first installed, but a simple install of the nvidia-current package got everything working nicely with my GTX570 card. There were appear to be some DKMS errors when I installed the kernel, and they indicated I should look at /var/lib/dkms/nvidia-current/295.40/build/make.log: josh@sirius:~/Downloads$ sudo dpkg -i linux-*.deb Selecting previously unselected package linux-headers-3.4.0-030400. (Reading database ... 309400 files and directories currently installed.) Unpacking linux-headers-3.4.0-030400 (from linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb) ... Selecting previously unselected package linux-headers-3.4.0-030400-generic. Unpacking linux-headers-3.4.0-030400-generic (from linux-headers-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb) ... Selecting previously unselected package linux-image-3.4.0-030400-generic. Unpacking linux-image-3.4.0-030400-generic (from linux-image-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb) ... Done. Setting up linux-headers-3.4.0-030400 (3.4.0-030400.201205210521) ... Setting up linux-headers-3.4.0-030400-generic (3.4.0-030400.201205210521) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.4.0-030400-generic /boot/vmlinuz-3.4.0-030400-generic ERROR (dkms apport): kernel package linux-headers-3.4.0-030400-generic is not supported Error! Bad return status for module build on kernel: 3.4.0-030400-generic (x86_64) Consult /var/lib/dkms/nvidia-current/295.40/build/make.log for more information. Setting up linux-image-3.4.0-030400-generic (3.4.0-030400.201205210521) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.4.0-030400-generic /boot/vmlinuz-3.4.0-030400-generic ERROR (dkms apport): kernel package linux-headers-3.4.0-030400-generic is not supported Error! Bad return status for module build on kernel: 3.4.0-030400-generic (x86_64) Consult /var/lib/dkms/nvidia-current/295.40/build/make.log for more information. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.4.0-030400-generic /boot/vmlinuz-3.4.0-030400-generic update-initramfs: Generating /boot/initrd.img-3.4.0-030400-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.4.0-030400-generic /boot/vmlinuz-3.4.0-030400-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.4.0-030400-generic /boot/vmlinuz-3.4.0-030400-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.4.0-030400-generic /boot/vmlinuz-3.4.0-030400-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.4.0-030400-generic Found initrd image: /boot/initrd.img-3.4.0-030400-generic Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic Found memtest86+ image: /memtest86+.bin Found Ubuntu 12.04 LTS (12.04) on /dev/sda1 Found Windows 7 (loader) on /dev/sda2 Found Windows 7 (loader) on /dev/sda3 done /var/lib/dkms/nvidia-current/295.40/build/make.log: DKMS make.log for nvidia-current-295.40 for kernel 3.4.0-030400-generic (x86_64) Thu Jun 7 00:58:39 BST 2012 NVIDIA: calling KBUILD... test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /var/lib/dkms/nvidia-current/295.40/build/.tmp_versions ; rm -f /var/lib/dkms/nvidia-current/295.40/build/.tmp_versions/* make -f scripts/Makefile.build obj=/var/lib/dkms/nvidia-current/295.40/build cc -Wp,-MD,/var/lib/dkms/nvidia-current/295.40/build/.nv.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6/include -I/usr/src/linux-headers-3.4.0-030400-generic/arch/x86/include -Iarch/x86/include/generated -Iinclude -include /usr/src/linux-headers-3.4.0-030400-generic/include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_FXSAVEQ=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -Wframe-larger-than=1024 -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -DCC_HAVE_ASM_GOTO -I/var/lib/dkms/nvidia-current/295.40/build -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"295.40\" -Wno-unused-function -Wuninitialized -mno-red-zone -mcmodel=kernel -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /var/lib/dkms/nvidia-current/295.40/build/.tmp_nv.o /var/lib/dkms/nvidia-current/295.40/build/nv.c In file included from include/linux/kernel.h:19:0, from include/linux/sched.h:55, from include/linux/utsname.h:35, from /var/lib/dkms/nvidia-current/295.40/build/nv-linux.h:38, from /var/lib/dkms/nvidia-current/295.40/build/nv.c:13: include/linux/bitops.h: In function ‘hweight_long’: include/linux/bitops.h:66:41: warning: signed and unsigned type in conditional expression [-Wsign-compare] In file included from /usr/src/linux-headers-3.4.0-030400-generic/arch/x86/include/asm/uaccess.h:577:0, from include/linux/poll.h:14, from /var/lib/dkms/nvidia-current/295.40/build/nv-linux.h:97, from /var/lib/dkms/nvidia-current/295.40/build/nv.c:13: /usr/src/linux-headers-3.4.0-030400-generic/arch/x86/include/asm/uaccess_64.h: In function ‘copy_from_user’: /usr/src/linux-headers-3.4.0-030400-generic/arch/x86/include/asm/uaccess_64.h:53:6: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] In file included from /var/lib/dkms/nvidia-current/295.40/build/nv.c:13:0: /var/lib/dkms/nvidia-current/295.40/build/nv-linux.h: At top level: /var/lib/dkms/nvidia-current/295.40/build/nv-linux.h:114:75: fatal error: asm/system.h: No such file or directory compilation terminated. make[3]: *** [/var/lib/dkms/nvidia-current/295.40/build/nv.o] Error 1 make[2]: *** [_module_/var/lib/dkms/nvidia-current/295.40/build] Error 2 NVIDIA: left KBUILD. nvidia.ko failed to build! make[1]: *** [module] Error 1 make: *** [module] Error 2

  Read the article

• Error while installation of CHMSee

  - by Anshuman Chakraborty

  I have recently migrated from Windows to Ubuntu. My current locale shows below output :- cha@COMPUTER:~$ locale LANG=en_IN LANGUAGE=en_IN:en LC_CTYPE="en_IN" LC_NUMERIC="en_IN" LC_TIME="en_IN" LC_COLLATE="en_IN" LC_MONETARY="en_IN" LC_MESSAGES="en_IN" LC_PAPER="en_IN" LC_NAME="en_IN" LC_ADDRESS="en_IN" LC_TELEPHONE="en_IN" LC_MEASUREMENT="en_IN" LC_IDENTIFICATION="en_IN" LC_ALL= When I am trying to install CHMSee (or any other Application) using UBUNTU Software Center. I am getting below error. installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Selecting previously unselected package libchm1. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 207053 files and directories currently installed.) Unpacking libchm1 (from .../libchm1_2%3a0.40a-1_i386.deb) ... Selecting previously unselected package libjavascriptcoregtk-1.0-0. Unpacking libjavascriptcoregtk-1.0-0 (from .../libjavascriptcoregtk-1.0-0_1.8.0-0ubuntu2_i386.deb) ... Selecting previously unselected package libwebkitgtk-1.0-common. Unpacking libwebkitgtk-1.0-common (from .../libwebkitgtk-1.0-common_1.8.0-0ubuntu2_all.deb) ... Selecting previously unselected package libwebkitgtk-1.0-0. Unpacking libwebkitgtk-1.0-0 (from .../libwebkitgtk-1.0-0_1.8.0-0ubuntu2_i386.deb) ... Selecting previously unselected package chmsee. Unpacking chmsee (from .../chmsee_1.3.0-2ubuntu2_i386.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for man-db ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up qmail (1.06-4) ... The hostname -f command returned: $1 Your system needs to have a fully qualified domain name (fqdn) in order to install the var-qmail packages. Installation aborted. dpkg: error processing qmail (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of qmail-run: qmail-run depends on qmail (>= 1.06-2.1); however: Package qmail is not configured yet. dpkg: error processing qmail-run (--configure): dependency problems - leaving unconfigured Setting up libchm1 (2:0.40a-1) ... No apport report written because the error message indicates its a followup error from a previous failure. Setting up libjavascriptcoregtk-1.0-0 (1.8.0-0ubuntu2) ... Setting up libwebkitgtk-1.0-common (1.8.0-0ubuntu2) ... Setting up libwebkitgtk-1.0-0 (1.8.0-0ubuntu2) ... Setting up chmsee (1.3.0-2ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: qmail qmail-run Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up qmail (1.06-4) ... The hostname -f command returned: $1 Your system needs to have a fully qualified domain name (fqdn) in order to install the var-qmail packages. Installation aborted. dpkg: error processing qmail (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of qmail-run: qmail-run depends on qmail (>= 1.06-2.1); however: Package qmail is not configured yet. dpkg: error processing qmail-run (--configure): dependency problems - leaving unconfigured Can someone please help me in resolving this issue. The elaboration would be most appreciated since I am very new to this. Thanks, Anshuman Chakraborty

  Read the article

• The volume "filesystem root" has only 0 bytes disk space remaining?

  - by radek

  I installed 11.10 ~two weeks ago and run into some strange troubles recently. Installation was on brand new laptop with clear 128GB SSD. I opted for encrypting home directory. Apart from that I accepted defaults during the installation. There is no other OS on my laptop. I had circa 40GB in use when (for the third time) I got to see this very unpleasant window: Twice situation was pretty bad and whole system slowed down considerably. After reboot I could not login to graphical interface (with an error message informing about insufficient space) and had to remove some files from command line first. Third time I still managed to quickly delete some files and it helped. My laptop is mainly work environment: so no torrents, games, just two movies. Only media filling space are ~20GB of pictures, and bunch of pdfs. Working mostly on PostgreSQL & PostGIS, GeoServer and QGIS recently. Although I had lots of opportunities to test and practice my backups I would be extremely grateful if somebody could point me to any potential solutions to this problem. My laptop has been bought just before I installed Ubuntu, and it came without OS. Could that be hardware issue? Or is the encrypted home causing me headaches? Thanks for help! Update: As suggested by @maniat1k, here is current output of fdisk -l: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 312581807 156290903+ ee GPT

  Read the article

• Samba smbtree No output; failed to retrieve share list

  - by TomKat

  I'm using Ubuntu 12.10 on two machines, one laptop & one desktop. Faced the same problem when I used 12.04. When I try connecting to the other machine using 'Connect to Server', I give the correct user & workgroup details, but the system displays 'failed to retrieve server list' I've tried editing /etc/samba/smb.conf file to: name resolve order = lmhosts host wins bcast I also added the other machine to /etc/hosts But, nothing worked. The output of smbtree is naveen@tomkat:~$ smbtree Enter naveen's password: naveen@tomkat:~$ Used sources to solve problem myself: "Failed to retrieve share list from server" error when browsing a share with Nautilus http://ubuntuforums.org/showthread.php?t=1114038 All help will be appreciated. Thanks. UPDATE: After 'purging' samba and all its components (incl all config files), and reinstall, sharing workes in one direction (from Laptop to Desktop) but when I attempt to use the Desktop as server, same problem is still faced. UPDATE 2 dpkg -l|grep samba output: naveen@tomkat:~$ sudo dpkg -l|grep samba [sudo] password for naveen: ii libcrypt-smbhash-perl 0.12-3 all generate LM/NT hash of a password for samba ii samba 2:3.6.6-3ubuntu5 i386 SMB/CIFS file, print, and login server for Unix ii samba-common 2:3.6.6-3ubuntu5 all common files used by both the Samba server and client ii samba-common-bin 2:3.6.6-3ubuntu5 i386 common files used by both the Samba server and client

  Read the article

• Intel Corporation Ethernet Connection does not start properly

  - by Oscar Alejos

  I'm experiencing some problems when trying to connect my PC to the router through a switch. When the PC is directly connected to the router, everything works fine, Ubuntu (14.04) starts normally, and the Internet connection runs inmediately. The Ethernet controller is the Intel Corporation Ethernet Connection, as lspci returns: $ lspci | grep Eth 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) However, when I try to connect through the switch what I get is the following. dmesg returns: $ dmesg | grep eth [ 1.035585] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.035587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a7:be:5d [ 1.035589] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.035625] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.357838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.641287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.715086] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.715090] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.715117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready It looks like eth0 is properly working. Actually, nm-tool returns: $ nm-tool - Device: eth0 [Conexión cableada] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: 00:22:4D:A7:BE:5D Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.30 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 80.58.61.250 DNS: 80.58.61.254 DNS: 192.168.1.1 However, ping returns: $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.30 icmp_seq=1 Destination Host Unreachable From 192.168.1.30 icmp_seq=2 Destination Host Unreachable From 192.168.1.30 icmp_seq=3 Destination Host Unreachable The connection is restored by restarting it: # ifconfig eth0 down # ifconfig eth0 up From this point on, everything runs smoothly, as if the PC were directly connected to the router. It seems to be an issue related to the integrated LAN adaptor and the Ethernet controller, since my laptop connects without any problem. My desktop board is an Intel DB85FL. I'd be grateful if anyone could give some ideas on how to solve this issue. Thank you in advance.

  Read the article

• apache2: Could not open configuration file /etc/apache2/apache2.conf: Permission denied

  - by AntonChanning

  I recently upgraded Ubuntu to the latest LTS edition on my work laptop, which I use as a LAMP development platform. The upgrade was from 12.4 to 14.4. Now I'm having trouble getting apache up and running again. Here is the output from an attempt: antonc@antonc-laptop:/etc/apache2$ sudo service apache2 restart * Restarting web server apache2 * The apache2 configtest failed. Output of config test was: apache2: Could not open configuration file /etc/apache2/apache2.conf: Permission denied Action 'configtest' failed. The Apache error log may have more information. Here is a list of permissions and ownership in /etc/apache, showing that apache2.conf is currently owned by root with permissions 644. I changed this temporarily to 777, but this made no difference, so I changed it back to 644. antonc@antonc-laptop:/etc/apache2$ ls -l total 80 -rw-r--r-- 1 root root 7115 Jan 7 2014 apache2.conf ... What do I need to do to get apache running again? Is the problem really with apache2.conf or some other setting? Should the conf file be owned by a user other than root?

  Read the article

• Permissions problem running Apache ActiveMQ

  - by Edd

  I'm wanting to use Apache ActiveMQ on Ubuntu 12.04 LTS, but am running into what looks like a permissions problem when I try to run it as follows: edd:~$ sudo activemq --version INFO: Loading '/usr/share/activemq/activemq-options' INFO: Using java '/usr/lib/jvm/java-6-openjdk//bin/java' INFO: changing to user 'activemq' to invoke java Java Runtime: Sun Microsystems Inc. 1.6.0_24 /usr/lib/jvm/java-6-openjdk-amd64/jre Heap sizes: current=502464k free=499842k max=502464k JVM args: -Xms512M -Xmx512M -Dorg.apache.activemq.UseDedicatedTaskRunner=true -Dactivemq.classpath=/var/lib/activemq//conf;; -Dactivemq.home=/usr/share/activemq -Dactivemq.base=/var/lib/activemq/ ACTIVEMQ_HOME: /usr/share/activemq ACTIVEMQ_BASE: /var/lib/activemq ActiveMQ 5.5.0 For help or more information please see: http://activemq.apache.org edd:~$ sudo activemq start INFO: Loading '/usr/share/activemq/activemq-options' INFO: Using java '/usr/lib/jvm/java-6-openjdk//bin/java' INFO: Starting - inspect logfiles specified in logging.properties and log4j.properties to get details INFO: changing to user 'activemq' to invoke java -su: line 2: /var/run/activemq.pid: Permission denied INFO: pidfile created : '/var/run/activemq.pid' (pid '7811') edd:~$ sudo activemq status INFO: Loading '/usr/share/activemq/activemq-options' INFO: Using java '/usr/lib/jvm/java-6-openjdk//bin/java' ActiveMQ not running edd:~$ ps ax | grep 'activemq' 8040 pts/0 S+ 0:00 grep --color=auto activemq I installed ActiveMQ using sudo apt-get install activemq. Apologies if there's any additional information missing - I'm fairly new to Linux as you may well have guessed!

  Read the article

• apt-get install fails due to dependency issues but apt-get -f install won't fix it

  - by user71941

  I've just installed Ubuntu 12.04 and was about to manually install Rawstudio with the packages from SourceForge repo, but I've been stuck with dependency issues and I am short on apt command lines to sort this out. Here's the report I'v got : installArchives() failed: dpkg: dependency problems prevent configuration of libgphoto2-2: libgphoto2-2 depends on libjpeg62; however: Package libjpeg62 is not installed. libgphoto2-l10n (2.4.13-1ubuntu1) breaks libgphoto2-2 (<= 2.4.10.1-4) and is installed. Version of libgphoto2-2 to be configured is 2.4.10.1-0ubuntu3~maverick. dpkg: error processing libgphoto2-2 (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of libgphoto2-2-dev: libgphoto2-2-dev depends on libgphoto2-2 (= 2.4.10.1-0ubuntu3~maverick); however: Package libgphoto2-2 is not configured yet. dpkg: error processing libgphoto2-2-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: libgphoto2-2 libgphoto2-2-dev Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) dpkg: dependency problems prevent configuration of libgphoto2-2: libgphoto2-2 depends on libjpeg62; however: Package libjpeg62 is not installed. libgphoto2-l10n (2.4.13-1ubuntu1) breaks libgphoto2-2 (<= 2.4.10.1-4) and is installed. Version of libgphoto2-2 to be configured is 2.4.10.1-0ubuntu3~maverick. dpkg: error processing libgphoto2-2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgphoto2-2-dev: libgphoto2-2-dev depends on libgphoto2-2 (= 2.4.10.1-0ubuntu3~maverick); however: Package libgphoto2-2 is not configured yet. dpkg: error processing libgphoto2-2-dev (--configure): dependency problems - leaving unconfigured I've tried "apt-get -f install" but without success. What is the mahick command line that will unblock the situation ? Thanks Seb

  Read the article

• sshfs with fstab: connection reset by peer

  - by user171348

  I am trying to allow my laptop (Ubuntu 13.04) to access my PC (Lubuntu 13.04) hard drive through SSHFS. I'm using RSA keys to connect. It works perfectly fine if I type this in the terminal: sshfs my-PC:/a_folder /media/a_folder But I would like it to be mounted automatically when I boot my laptop. So I added myself to the fuse group: sudo adduser mynickname fuse And I added the following line to my fstab file: sshfs#mynickname@my-PC:/a_folder /media/a_folder fuse defaults,idmap=user,_netdev 0 0 When I boot the laptop, a_folder appears in the list of devices, but is not mounted. When I try to access it through Nautilus, it displays the following error: mount: only root can mount sshfs#mynickname@my-PC:/a_folder on /media/a_folder I get the same error if I try mount /media/a_folder in a terminal. If I try sudo mount /media/a_folder I get read: Connection reset by peer I tried to add "allow_other" as an option in the fstab entry, and uncommented the related line in /etc/fuse.conf, but it didn't change anything. The user "mynickname" is the owner of the folder /media/a_folder and has rwx permissions. I looked at many threads on the internet about people with quite similar issues, but nothing worked so far. Usually, people can't even do sshfs my-PC:/a_folder /media/a_folder without getting an error, whereas this works fine on my laptop. Any insight and tips will be greatly appreciated! Thanks.

  Read the article

• Google Chrome installation error

  - by PlinioSantos

  I used to use google chrome as default browser. One day I tried to use Google Cast extension to send my browser screen to chromecast, but I realized that my Chrome version was old. So I downloaded the debian package from google web site, but I ran on a dependency failure: $ sudo dpkg -i /home/plinio/Downloads/google-chrome-stable_current_amd64.deb (Reading database ... 195156 files and directories currently installed.) Preparing to replace google-chrome-stable 35.0.1916.114-1 (using .../google-chrome-stable_current_amd64.deb) ... Unpacking replacement google-chrome-stable ... dpkg: dependency problems prevent configuration of google-chrome-stable: google-chrome-stable depends on libnss3 (>= 3.14.3); however: Version of libnss3 on system is 3.14.1-0ckbi1.93ubuntu.0.12.04.1. dpkg: error processing google-chrome-stable (--install): dependency problems - leaving unconfigured Processing triggers for man-db ... Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Errors were encountered while processing: google-chrome-stable How to solve it? I had no success with Synaptc and Ubuntu Software Center as well.

  Read the article

• How do I get this Cisco VPN client to connect?

  - by WebWeasel

  I've got Ubuntu 10.10 64 bit and installed network-manager-vpnc and configured the connection but I keep getting this: NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4420 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 NetworkManager[1217]: <info> VPN connection 'CSI' (Connect) reply received. modem-manager: (net/tun0): could not get port's parent device NetworkManager[1217]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found. kernel: [ 2281.723506] tun0: Disabled Privacy Extensions avahi-daemon[1109]: Withdrawing workstation service for tun0. NetworkManager[1217]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: <warn> VPN plugin failed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 6 NetworkManager[1217]: <info> VPN plugin state change reason: 0 NetworkManager[1217]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. NetworkManager[1217]: <info> Policy set 'Auto eth0' (eth0) as default for IPv4 routing and DNS. NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4547 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 I've seen a couple of bugs on Launchpad that could be the same thing or have I done something wrong?

  Read the article

• Gnome 3 freezes on logon on samsung RV 509

  - by Noufal

  I have a Samsung NP-RV509 A0FIN and I tried to install GNU/Linux with gnome 3.2 on it. I tried Fedora 16, Ubuntu 11.10 and Linux Mint 12 RC, but with no success. All of these freezes upon login into gnome shell. I think it is the problem with graphics driver, so I tried xorg-edgers ppa on my last installation, ie., Linux Mint. I also tried various intel graphics packages listed on Synaptic package manager, but no success again. My device configuration is as follows(obtained from windows 7): More details about my computer Component Details Subscore Base score Processor Intel(R) Pentium(R) CPU P6200 @ 2.13GHz 5.6 4.6 Memory (RAM) 4.00 GB 7.2 Graphics Intel(R) HD Graphics 4.6 Gaming graphics 1562 MB Total available graphics memory 5.2 Primary hard disk 12GB Free (50GB Total) 5.9 Windows 7 Ultimate System -------------------------------------------------------------------------------- Manufacturer SAMSUNG ELECTRONICS CO., LTD. Model RV409/RV509/RV709 Total amount of system memory 4.00 GB RAM System type 32-bit operating system Number of processor cores 2 64-bit capable Yes Storage -------------------------------------------------------------------------------- Total size of hard disk(s) 418 GB Disk partition (C:) 12 GB Free (50 GB Total) Media drive (D:) CD/DVD Disk partition (E:) 526 MB Free (191 GB Total) Disk partition (F:) 101 GB Free (177 GB Total) Graphics -------------------------------------------------------------------------------- Display adapter type Intel(R) HD Graphics Total available graphics memory 1562 MB Dedicated graphics memory 64 MB Dedicated system memory 0 MB Shared system memory 1498 MB Display adapter driver version 8.15.10.2202 Primary monitor resolution 1366x768 DirectX version DirectX 10 Network -------------------------------------------------------------------------------- Network Adapter Realtek PCIe GBE Family Controller Network Adapter Broadcom 802.11n Network Adapter Network Adapter Microsoft Virtual WiFi Miniport Adapter Notes -------------------------------------------------------------------------------- The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits. Any help is appreciated, and thanks in advance.

  Read the article

• Arduino IDE not connecting to microcontroller

  - by JDD

  I get this error when trying to connect to an Arduino through a USB serial connection. I'm using the Arduino IDE 1.0.1 and the 64bit version of Ubuntu 12.04. This has been a reoccurring problem since 10.04 and happens to a few other programs that use a serial connection too. I have no problem getting serial data from the Arduino using Python or Screen. The Arduino IDE seems to work just fine otherwise. processing.app.SerialException: Error opening serial port '/dev/ttyACM0'. at processing.app.Serial.<init>(Serial.java:178) at processing.app.Serial.<init>(Serial.java:92) at processing.app.SerialMonitor.openSerialPort(SerialMonitor.java:207) at processing.app.Editor.handleSerial(Editor.java:2447) at processing.app.EditorToolbar.mousePressed(EditorToolbar.java:353) at java.awt.Component.processMouseEvent(Component.java:6386) at javax.swing.JComponent.processMouseEvent(JComponent.java:3268) at java.awt.Component.processEvent(Component.java:6154) at java.awt.Container.processEvent(Container.java:2045) at java.awt.Component.dispatchEventImpl(Component.java:4750) at java.awt.Container.dispatchEventImpl(Container.java:2103) at java.awt.Component.dispatchEvent(Component.java:4576) at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4633) at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4294) at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4227) at java.awt.Container.dispatchEventImpl(Container.java:2089) at java.awt.Window.dispatchEventImpl(Window.java:2518) at java.awt.Component.dispatchEvent(Component.java:4576) at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:672) at java.awt.EventQueue.access$400(EventQueue.java:96) at java.awt.EventQueue$2.run(EventQueue.java:631) at java.awt.EventQueue$2.run(EventQueue.java:629) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:105) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:116) at java.awt.EventQueue$3.run(EventQueue.java:645) at java.awt.EventQueue$3.run(EventQueue.java:643) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:105) at java.awt.EventQueue.dispatchEvent(EventQueue.java:642) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:275) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:200) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:185) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:177) at java.awt.EventDispatchThread.run(EventDispatchThread.java:138) Caused by: gnu.io.UnsupportedCommOperationException: Invalid Parameter at gnu.io.RXTXPort.setSerialPortParams(RXTXPort.java:171) at processing.app.Serial.<init>(Serial.java:163) ... 35 more

  Read the article

• Unable to install Eclipse manually

  - by veerendar

  I have just started Linux. I have a SBC(Atom processor) on which I have installed Ubuntu 12.04 and now I am trying to install Fortran IDE. For which I have learnt that I need to install OpenJDK first, then Eclipse Juno and at last the Phortran plugin for Eclipse. I have no Internet access so I had follow the below steps for manual installation. First download the eclipse tar.gz package (downloaded: eclipse-parallel-juno-linux-gtk.tar). Then right-click the eclipse tar.gz and choose the extract here option to extract the tar.gz package.You can also use the command line to extract the tar.gz package. # tar xzf eclipse-cpp-juno-linux-gtk.tar.gz Move to /opt/ folder. # mv eclipse /opt/ Use sudo if the above command gives permission denied message. # sudo mv eclipse /opt/ Create a desktop file and place it into /usr/share/applications # sudo gedit /usr/share/applications/eclipse.desktop and copy the following to the eclipse.desktop file [Desktop Entry] Name=Eclipse Type=Application Exec=/opt/eclipse/eclipse Terminal=false Icon=/opt/eclipse/icon.xpm Comment=Integrated Development Environment NoDisplay=false Categories=Development;IDE Name[en]=eclipse.desktop Create a symlink in /usr/local/bin using # cd /usr/local/bin # sudo ln -s /opt/eclipse/eclipse Now its the time to launch eclipse. # /opt/eclipse/eclipse -clean & Now at step 5, when I type the command sudo ln -s /opt/eclipse/eclipse , I get an this error message: ln: Failed to create symbolic link './eclipse': File exists. Please help me in resolving this.

  Read the article

• /usr/lib/cups/backend/hp has failed with an HP LaserJet p3005

  - by edtechdev

  Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a pdf from the document viewer (also doesn't work with adobe pdf reader)). Sometimes it fails so bad the printer gives an error saying it needs to be turned off and on again. I can't seem to find a fix anywhere, I've googled all over the past year and tried every fix I could find. It does say that the /usr/lib/cups/backend/hp has failed. It also doesn't make a difference if I create the printer using hp-setup or ubuntu's own printing control panel. I delete and re-create the printer, no difference eventually. I use the default printer settings or custom settings, no difference. I can print perfectly find to a networked printer at home - an HP officejet 6310. It seems to be networked HP printers at work that I can't print to anymore (except occasionally right after re-installing the printer driver). What's the recommended way to install HP printer drivers and reset or clean out everything from before. Or where are the right logs to read or debug commands to do to find out what may be the real cause of the printing problems?

  Read the article

• Wireless not working - HP Probook 4540s

  - by Oguzhan

  I just installed Ubuntu 12.04 on 3 HP Probook 4540s's, and none of them seems to be able to connect to wireless networks. I have 1 Probook 4540s with Windows 7 installed and I can access wlan from it. I tried installing the necessary drivers from HP's website, but it still doesn't seem to be working. I've seen other people with different Probooks having similar problems, but their computers seem to be able to detect and even attempt to connect wlans, while mine doesn't even acknowledge that it has wireless. Any help would be appreciated. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30) 04:00.0 Network controller: Ralink corp. Device 3290 04:00.1 Bluetooth: Ralink corp. Device 3298 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

  Read the article

• puppet rspec no such file to load -- rspec-puppet (LoadError)

  - by Vorsprung

  I have no prior experience at all of ruby. I am not interested in ruby (and so have no knowledge of rails etc) as such but am using puppet to manage a group of servers. I have written some modules and the rspec-puppet system looks like it would be very useful. However, I cannot get rspec-puppet to work I am using Ubuntu LTS 10.04 I have installed puppet rspec using the directions on their web page What I actually did apt-get install rubygems # (installs 1.8) gem install rspec-expectations gem install rspec-puppet I also installed librspec-ruby1.8 Then I ran rspec-puppet-init in a puppet module directory I'd already made (it's a working puppet module) I made a file as defined in the tutorial $ more spec/defines/rule_spec.rb require 'spec_helper' describe 'vanusers::rule' do let(:title) { 't1' } it { should contain_class('vanusers::JamieA') } end but when I try and run it there is a mysterious dependancy issue $ spec spec/defines/rule_spec.rb /home/jamie/git/puppet/modules/vanusers/spec/spec_helper.rb:1:in `require': no such file to load -- rspec-puppet (LoadError) from /home/jamie/git/puppet/modules/vanusers/spec/spec_helper.rb:1 from ./spec/defines/rule_spec.rb:1:in `require' from ./spec/defines/rule_spec.rb:1 from /usr/lib/ruby/1.8/spec/runner/example_group_runner.rb:15:in `load' from /usr/lib/ruby/1.8/spec/runner/example_group_runner.rb:15:in `load_files' from /usr/lib/ruby/1.8/spec/runner/example_group_runner.rb:14:in `each' from /usr/lib/ruby/1.8/spec/runner/example_group_runner.rb:14:in `load_files' from /usr/lib/ruby/1.8/spec/runner/options.rb:132:in `run_examples' from /usr/lib/ruby/1.8/spec/runner/command_line.rb:9:in `run' from /usr/bin/spec:3 Here is the solution I came up with in the end:: apt-get install rubygems gem install rspec-expectations rspec-puppet puppet-lint puppetlabs_spec_helper so your path picks up the gem stuff export PATH=/var/lib/gems/1.8/bin:$PATH cd into module and rm spec/spec_helper.rb rspec-puppet-init replace Rakefile with require 'rake' require 'rspec/core/rake_task' require 'puppetlabs_spec_helper/rake_tasks' Then "rake spec" to run tests or "rake lint" to check files http://sysadvent.blogspot.co.uk/2013/12/day-22-getting-started-testing-your.html was an excellent source of info

  Read the article

< Previous Page | 710 711 712 713 714 715 716 717 718 719 720 721  | Next Page >