Search Results

Search found 21142 results on 846 pages for 'bit manipulation'.

Page 758/846 | < Previous Page | 754 755 756 757 758 759 760 761 762 763 764 765  | Next Page >

• New Computer Build Questions

  - by MJ

  I'm in the process of gathering parts and specs for a new machine. I wear many hats, so the machine needs to do a lot. I need at least 2 monitor support, if not three. I also play many online MMOs (wow, aion, war hammer, etc), along with some freelance programming projects. I already have a case which is very large, so it will fit anything. I have 2 other SATA HDs. They are more for storage and basic programs. I feel that the best improvement could be done with a solid state HD, true or not? I'm more of a software/programming guy, so ANY input at all on improving this system build would be appreciated. I have a few questions with this list. AMD or Intel? I don't know enough about either to choose what would best fit me. Thanks! **EDIT: Thanks for the input everyone! Here are some answers: I do a lot of programming and gaming, so I do need things for both. The newer video card covers the gaming aspect, as well as allowing me to have many monitors. (hopefully upgrade to dual 30' or more) I don't need any additional HDs at this time. I have a SATA 160g and 120g from my previous computer, and a NAS system with over 2TB of storage on the homenetwork. I just wanted a fast HD for OS/programs/games. With the memory. I have used G.SKILL before in 2 system builds. It's done excellent for me in them. Very stable. **EDIT2: Made some additional changes. Lowered the power supply down to 750, which saves me more $$. Also changed the SSD to 2 WD 650G HDs. Thinking of doing a CPU upgrade to the 3.4GHZ AMD Phenom II X4 965 Black Edition Deneb 3.4GHz System Specs - Budget:$1500 CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz MB: GIGABYTE GA-MA790GPT-UD3H AM3 AMD 790GX HDMI ATX Memory: G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 1066 Video: DIAMOND 5870PE51G Radeon HD 5870 (Cypress XT) 1GB 256-bit GD Power Supply: XCLIO GREATPOWER 1000W ATX12V SLI Ready CrossFire Ready HD:Intel X25-M Mainstream SSDSA2MH080G2C1 2.5" 80GB SATA II MLC Changes: Power Supply: CORSAIR CMPSU-750TX 750W ATX12V / EPS12V HD: 2x Western Digital Caviar Blue WD6400AAKS 640GB CPU: AMD Phenom II X4 965 Black Edition Deneb 3.4GHz

  Read the article

• Can't ssh tunnel to access a remote mysql server

  - by hobbes3

  I can't seem to figure out why I can't use ssh tunnel to connect to my remote MySQL server. I do ssh tunnel with [hobbes3@hobbes3] ~ $ ssh linode -L 3307:localhost:3306 Then on another terminal, I try [hobbes3@hobbes3] ~ $ mysql -h localhost -P 3307 -u root --protocol=tcp -p Enter password: ERROR 2013 (HY000): Lost connection to MySQL server at 'reading initial communication packet', system error: 2 On the server, it shows this: root@li534-120 ~ # channel 4: open failed: connect failed: Connection refused Here is my my.cnf on the server: [mysqld] # Settings user and group are ignored when systemd is used (fedora >= 15). # If you need to run mysqld under different user or group, # customize your systemd unit file for mysqld according to the # instructions in http://fedoraproject.org/wiki/Systemd user=mysql datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 # Semisynchronous Replication # http://dev.mysql.com/doc/refman/5.5/en/replication-semisync.html # uncomment next line on MASTER ;plugin-load=rpl_semi_sync_master=semisync_master.so # uncomment next line on SLAVE ;plugin-load=rpl_semi_sync_slave=semisync_slave.so # Others options for Semisynchronous Replication ;rpl_semi_sync_master_enabled=1 ;rpl_semi_sync_master_timeout=10 ;rpl_semi_sync_slave_enabled=1 # http://dev.mysql.com/doc/refman/5.5/en/performance-schema.html ;performance_schema [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid [mysqld] port = 3306 socket=/var/lib/mysql/mysql.sock skip-external-locking key_buffer_size = 64M max_allowed_packet = 128M sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M thread_cache = 8 max_connections = 25 query_cache_size = 16M table_open_cache = 1024 table_definition_cache = 1024 tmp_table_size = 32M max_heap_table_size = 32M bind-address = 0.0.0.0 Now sure if this helps but here is the MySQL user list: mysql> select * from mysql.user; +-----------+------+-------------------------------------------+-------------+-------------+-------------+-------------+-------------+-----------+-------------+---------------+--------------+-----------+------------+-----------------+------------+------------+--------------+------------+-----------------------+------------------+--------------+-----------------+------------------+------------------+----------------+---------------------+--------------------+------------------+------------+--------------+------------------------+----------+------------+-------------+--------------+---------------+-------------+-----------------+----------------------+--------+-----------------------+ | Host | User | Password | Select_priv | Insert_priv | Update_priv | Delete_priv | Create_priv | Drop_priv | Reload_priv | Shutdown_priv | Process_priv | File_priv | Grant_priv | References_priv | Index_priv | Alter_priv | Show_db_priv | Super_priv | Create_tmp_table_priv | Lock_tables_priv | Execute_priv | Repl_slave_priv | Repl_client_priv | Create_view_priv | Show_view_priv | Create_routine_priv | Alter_routine_priv | Create_user_priv | Event_priv | Trigger_priv | Create_tablespace_priv | ssl_type | ssl_cipher | x509_issuer | x509_subject | max_questions | max_updates | max_connections | max_user_connections | plugin | authentication_string | +-----------+------+-------------------------------------------+-------------+-------------+-------------+-------------+-------------+-----------+-------------+---------------+--------------+-----------+------------+-----------------+------------+------------+--------------+------------+-----------------------+------------------+--------------+-----------------+------------------+------------------+----------------+---------------------+--------------------+------------------+------------+--------------+------------------------+----------+------------+-------------+--------------+---------------+-------------+-----------------+----------------------+--------+-----------------------+ | localhost | root | *664328D3C5E263F4FB25185681AAE7E92B01B2B0 | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | | | | | 0 | 0 | 0 | 0 | | | | 127.0.0.1 | root | *664328D3C5E263F4FB25185681AAE7E92B01B2B0 | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | | | | | 0 | 0 | 0 | 0 | | | | ::1 | root | *664328D3C5E263F4FB25185681AAE7E92B01B2B0 | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | | | | | 0 | 0 | 0 | 0 | | | +-----------+------+-------------------------------------------+-------------+-------------+-------------+-------------+-------------+-----------+-------------+---------------+--------------+-----------+------------+-----------------+------------+------------+--------------+------------+-----------------------+------------------+--------------+-----------------+------------------+------------------+----------------+---------------------+--------------------+------------------+------------+--------------+------------------------+----------+------------+-------------+--------------+---------------+-------------+-----------------+----------------------+--------+-----------------------+ 3 rows in set (0.00 sec) I read about how MySQL treats localhost vs 127.0.0.1 as connecting via a socket or TCP, respectively. But I'm starting to get confused on what's really going on or if socket vs TCP is even the issue. Thanks in advance and I'm open for any tips and suggestions! Some more info: My MySQL client, running OS X 10.8.4, is mysql Ver 14.14 Distrib 5.6.10, for osx10.8 (x86_64) using EditLine wrapper My MySQL server, running on CentOS 6.4 32-bit, is mysql> SHOW VARIABLES LIKE "%version%"; +-------------------------+--------------------------------------+ | Variable_name | Value | +-------------------------+--------------------------------------+ | innodb_version | 1.1.8 | | protocol_version | 10 | | slave_type_conversions | | | version | 5.5.28 | | version_comment | MySQL Community Server (GPL) by Remi | | version_compile_machine | i686 | | version_compile_os | Linux | +-------------------------+--------------------------------------+ 7 rows in set (0.00 sec)

  Read the article

• Uninstalling MySQL for MariaDB Replacement on cPanel

  - by ImmortalFirefly

  Well the first part of my day was spent researching how to remove MySQL to install MariaDB and the second part of my day was spent trying to reinstall MySQL cause something was messed up. So now I come to the masses for some help. I have a box with cPanel/WHM on it. CentOS 5.6 64 bit. I have upgraded (through WHM) MySQL to 5.5.24 and that was successful. After some research, the options I found were an intimidating Linux command with pipes greps and dashes, and another command yum remove mysql I tried that out and it appeared to remove mysql.....ish. I tried installing MariaDB from this instructions page and it started to do it's thing and then came the zillions of errors (here's a small sample): Transaction Check Error: file /etc/init.d/mysql from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysql_convert_table_format from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysql_install_db from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysql_secure_installation from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqlbug from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqld_multi from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqld_safe from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqldumpslow from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqlhotcopy from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/innochecksum.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/my_print_defaults.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/myisam_ftdump.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/myisamchk.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/myisamlog.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 So it appeared that MySQL wasn't removed correctly. I've read from different tutorials given on different sites that to install MariaDB, you had to uninstall/remove MySQL and there weren't any commands given on how to do this. Does anyone know how to "safely" remove MySQL on a WHM/cPanel server so that I can install MariaDB? Here's my repo file in case anyone needs to know... # MariaDB repository list - created 2012-07-10 17:09 UTC # http://downloads.mariadb.org/mariadb/repositories/ [mariadb] name = MariaDB baseurl = http://yum.mariadb.org/5.5/centos5-x86 gpgcheck=1

  Read the article

• High CPU from httpd process

  - by KHWeb

  I am currently getting high CPU on a server that is just running a couple of sites with very low traffic. One of the sites is in still development going live soon. However, this site is very very slow...When browsing through its pages I can see that the CPU goes from 30% to 100% for httpd (see top output below). I have tuned httpd & MySQL, Apache Solr, Tomcat for high performance, and I am using APC. Not sure what to do from here or how to find the culprit as I have a bunch of messages on the httpd log and have been chasing dead ends for some time...any help is greatly appreciated. Server: AuthenticAMD, Quad-Core AMD Opteron(tm) Processor 2352, RAM 16GB Linux 2.6.27 64-bit, Centos 5.5 Plesk 9.5.4, MySQL 5.1.48, PHP 5.2.17 Apache/2.2.3 (CentOS) DAV/2 mod_jk/1.2.15 mod_ssl/2.2.3 OpenSSL/0.9.8e-fips-rhel5 PHP/5.2.17 mod_perl/2.0.4 Perl/v5.8.8 Tomcat6-6.0.29-1.jpp5, Tomcat-native-1.1.20-1.el5, Apache Solr top 17595 apache 20 0 1825m 507m 10m R 100.4 3.2 0:17.50 httpd 17596 apache 20 0 1565m 247m 9936 R 83.1 1.5 0:10.86 httpd 17598 apache 20 0 1430m 110m 6472 S 54.5 0.7 0:08.66 httpd 17599 apache 20 0 1438m 124m 12m S 37.2 0.8 0:11.20 httpd 16197 mysql 20 0 13.0g 2.0g 5440 S 9.6 12.6 297:12.79 mysqld 17617 root 20 0 12748 1172 812 R 0.7 0.0 0:00.88 top 8169 tomcat 20 0 4613m 268m 6056 S 0.3 1.7 6:40.56 java httpd error_log [debug] prefork.c(991): AcceptMutex: sysvsem (default: sysvsem) [info] mod_fcgid: Process manager 17593 started [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17594 for worker proxy:reverse [debug] proxy_util.c(1967): proxy: initialized single connection worker 0 in child 17594 for (*) [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17595 for worker proxy:reverse [debug] proxy_util.c(1873): proxy: worker proxy:reverse already initialized [notice] child pid 22782 exit signal Segmentation fault (11) [error] (43)Identifier removed: apr_global_mutex_lock(jk_log_lock) failed [debug] util_ldap.c(2021): LDAP merging Shared Cache conf: shm=0x7fd29a5478c0 rmm=0x7fd29a547918 for VHOST: example.com [info] APR LDAP: Built with OpenLDAP LDAP SDK [info] LDAP: SSL support available [info] Init: Seeding PRNG with 256 bytes of entropy [info] Init: Generating temporary RSA private keys (512/1024 bits) [info] Init: Generating temporary DH parameters (512/1024 bits) [debug] ssl_scache_shmcb.c(374): shmcb_init allocated 512000 bytes of shared memory [debug] ssl_scache_shmcb.c(554): entered shmcb_init_memory() [debug] ssl_scache_shmcb.c(576): for 512000 bytes, recommending 4265 indexes [debug] ssl_scache_shmcb.c(619): shmcb_init_memory choices follow [debug] ssl_scache_shmcb.c(621): division_mask = 0x1F [debug] ssl_scache_shmcb.c(623): division_offset = 96 [debug] ssl_scache_shmcb.c(625): division_size = 15997 [debug] ssl_scache_shmcb.c(627): queue_size = 2136 [debug] ssl_scache_shmcb.c(629): index_num = 133 [debug] ssl_scache_shmcb.c(631): index_offset = 8 [debug] ssl_scache_shmcb.c(633): index_size = 16 [debug] ssl_scache_shmcb.c(635): cache_data_offset = 8 [debug] ssl_scache_shmcb.c(637): cache_data_size = 13853 [debug] ssl_scache_shmcb.c(650): leaving shmcb_init_memory()

  Read the article

• mailman web UI on localhost with apache2

  - by Thufir

  I'm interested only in running mailman on localhost and would like access to the web interface, but am getting 404: root@dur:~# root@dur:~# ln -s /etc/mailman/apache.conf /etc/apache2/sites-enabled/mailman -v `/etc/apache2/sites-enabled/mailman' -> `/etc/mailman/apache.conf' root@dur:~# root@dur:~# service apache2 restart * Restarting web server apache2 ... waiting . [ OK ] root@dur:~# root@dur:~# curl http://localhost/mailman/admin/ <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>404 Not Found</title> </head><body> <h1>Not Found</h1> <p>The requested URL /mailman/admin/ was not found on this server.</p> <hr> <address>Apache/2.2.22 (Ubuntu) Server at localhost Port 80</address> </body></html> root@dur:~# root@dur:~# tail /var/log/apache2/error.log [Mon Aug 27 13:08:02 2012] [error] [client 127.0.0.1] File does not exist: /var/www/mailman [Mon Aug 27 13:10:16 2012] [error] [client 127.0.0.1] File does not exist: /var/www/mailman [Mon Aug 27 13:29:27 2012] [notice] caught SIGTERM, shutting down [Mon Aug 27 13:29:27 2012] [error] python_init: Python version mismatch, expected '2.7.2+', found '2.7.3'. [Mon Aug 27 13:29:27 2012] [error] python_init: Python executable found '/usr/bin/python'. [Mon Aug 27 13:29:27 2012] [error] python_init: Python path being used '/usr/lib/python2.7/:/usr/lib/python2.7/plat-linux2:/usr/lib/python2.7/lib-tk:/usr/lib/python2.7/lib-old:/usr/lib/python2.7/lib-dynload'. [Mon Aug 27 13:29:27 2012] [notice] mod_python: Creating 8 session mutexes based on 6 max processes and 25 max threads. [Mon Aug 27 13:29:27 2012] [notice] mod_python: using mutex_directory /tmp [Mon Aug 27 13:29:28 2012] [notice] Apache/2.2.22 (Ubuntu) mod_python/3.3.1 Python/2.7.3 mod_ruby/1.2.6 Ruby/1.8.7(2011-06-30) configured -- resuming normal operations [Mon Aug 27 13:29:58 2012] [error] [client 127.0.0.1] File does not exist: /var/www/mailman root@dur:~# Although I did have to tinker a bit with mailmain to get that recognized. While I don't need to setup web access using MM list passwords, I would like to setup web admin to add/remove mailing lists. How do I configure apache or mailman so that I can navigate to http://localhost/mailman/admin/? As per installing mailman, I setup aliases as so: root@dur:~# root@dur:~# cat /etc/aliases usenet: root ## mailman mailing list mailman: "|/var/lib/mailman/mail/mailman post mailman" mailman-admin: "|/var/lib/mailman/mail/mailman admin mailman" mailman-bounces: "|/var/lib/mailman/mail/mailman bounces mailman" mailman-confirm: "|/var/lib/mailman/mail/mailman confirm mailman" mailman-join: "|/var/lib/mailman/mail/mailman join mailman" mailman-leave: "|/var/lib/mailman/mail/mailman leave mailman" mailman-owner: "|/var/lib/mailman/mail/mailman owner mailman" mailman-request: "|/var/lib/mailman/mail/mailman request mailman" mailman-subscribe: "|/var/lib/mailman/mail/mailman subscribe mailman" mailman-unsubscribe: "|/var/lib/mailman/mail/mailman unsubscribe mailman" root@dur:~# Perhaps these can be used somehow?

  Read the article

• Windows explorer locks files

  - by John Prince

  I'm using Office 2010 & Windows 7 Home Premium 64-bit. My problem starts when I attempt to save e-mail messages to my PC that I have received via Outlook (my ISP is Comcast). I'm using the default .msg file extension option when I attempt to save these e-mails. The resultant files are locked and do not show the normal "envelope" icon. Instead, it’s a “blank page” icon with the right upper corner folded in. These files refuse to open either by double clicking on them or right clicking and trying to open them with Outlook. And when I return to Outlook, I discover that Outlook is now hung up and I have to close it via the Task Manager. To make matters worse, I’ve also discovered that every e-mail message that I've saved on my PC over the years has also somehow become locked and their original "envelope" icon has been replaced with the "blank page" icon. I found and installed an application called LockHunter. As a result, when I right click on a saved and locked e-mail message, I’ve given an option to find out what's locking it. Each time I'm told that the culprit is Windows explorer.exe. When I unlock the file the normal envelope icon is sometimes displayed (but not always) but at least the file can then be opened. But the file is still “squirrely” as it can’t be moved or saved to a folder until it’s unlocked again. On this second attempt, LockHunter says it’s now locked by Outlook.exe. By the way, I don't have this issue when I save Word, Excel & PowerPoint files; only with Outlook. I've exhausted every remedy that I can think of including: making sure that the file and folder options are checked to always show icons and not thumbnails; running the Windows 7 & Office 2010 repair options which find nothing amiss; running a complete system scan with Windows Malicious Software Removal Tool with negative results; verifying that Outlook is the default for opening e-mails; updating all of my applications via Secunia Personal Software Inspector; uninstalling every application that I felt was unnecessary; doing a registry cleanup via CC Cleaner; having Windows Security Essentials always on (it did find one Java Trojan recently which was quarantined and then deleted); uninstalling a bunch of non-Microsoft shell extensions; and deactivating all of the Outlook Add-ins and then re-activating each one. None of this solves the problem. I’d welcome any advice on how to resolve this.

  Read the article

• Pros/Cons of switching from Exchange to GMail

  - by Brent

  We are a medium-large non-profit company, with around 1000 staff and volunteers, and have been using MS Exchange (currently 2003) for our mail system for years. I recently attended a Google conference where they were positing that "Cloud computing is the way of the future", and encouraging us to switch from doing our own email with Exchange, to using GMail and Google Apps for everything. Additionally, one of our departments has been pushing from inside to do this transition within their own department, if not throughout the entire organization. I can definitely see some benefits - such as: Archive space - we never seem to have the space our users want, and of course, the more we get, the more we have to back up OS Agnostic - Exchange is definitely built for windows, and with mac and linux users on the rise, these users increasingly demand better tools / support. Google offers this. Better archiving - potential of e-discovery, that doesn't exist in a practical way with our current setup. Switching would relieve us of a fair bit of server administration, give more options to our end users, and free up the server resources we are now using for Exchange. Our IT department wants to be perceived as providing up-to-date solutions to technical problems, and this change would definitely provide such an image. Google's infrastructure is obviously much more robust than ours, and they employ some of the world's best security and network experts. However, there are also some serious drawbacks: We would be essentially outsourcing one of our mission-critical systems to a 3rd party The switch would inevitably involve Google Apps and perhaps more as well. That means we would have a-lot more at the mercy of a single (potentially weak) password. (is there a way to make this more secure using a password plus physical key of some sort??) Our data would not remain under our roof - or even in our country (Canada). This obviously has plusses on the Disaster Recovery side, but I think there are potential negatives on the legal side. I can't imagine that somebody as large as Google would be as responsive as we would want with regard to non-critical issues such as tracing missing emails, etc. (not sure how much access we would have to basic mail logs - for instance) Can anyone help me evaluate this decision? What issues am I overlooking? What experiences have you had with this transition (or the opposite - gmail to Exchange) Can you add to the points I have already outlined?

  Read the article

• Automating the choice between JPEG and PNG with a script

  - by MHC

  Choosing the right format to save your images in is crucial for preserving image quality and reducing artifacts. Different formats follow different compression methods and come with their own set of advantages and disadvantages. JPG, for instance is suited for real life photographs that are rich in color gradients. The lossless PNG, on the other hand, is far superior when it comes to schematic figures: Picking the right format can be a chore when working with a large number of files. That's why I would love to find a way to automate it. A little bit of background on my particular use case: I am working on a number of handouts for a series of lectures at my unversity. The handouts are rich in figures, which I have to extract from PDF-formatted slides. Extracting these images gives me lossless PNGs, which are needlessly large at times. Converting these particular files to JPEG can reduce their size to up to less than 20% of their original file size, while maintaining the same quality. This is important as working with hundreds of large images in word processors is pretty crash-prone. Batch converting all extracted PNGs to JPEGs is not an option I am willing to follow, as many if not most images are better suited to be formatted as PNGs. Converting these would result in insignificant size reductions and sometimes even increases in filesize - that's at least what my test runs showed. What we can take from this is that file size after compression can serve as an indicator on what format is suited best for a particular image. It's not a particularly accurate predictor, but works well enough. So why not use it in form of a script: I included inotifywait because I would prefer for the script be executed automatically as soon as I drag an extracted image into a folder. This is a simpler version of the script that I've been using for the last couple of weeks: #!/bin/bash inotifywait -m --format "%w%f" --exclude '.jpg' -r -e create -e moved_to --fromfile '/home/MHC/.scripts/Workflow/Conversion/include_inotifywait' | while read file; do mogrify -format jpg -quality 92 "$file" done The advanced version of the script would have to be able to handle spaces in file names and directory names preserve the original file names flatten PNG images if an alpha value is set compare the file size between the temporary converted image and its original determine if the difference is greater than a given precentage act accordingly The actual conversion could be done with imagemagick tools: convert -quality 92 -flatten -background white file.png file.jpg Unfortunately, my bash skills aren't even close to advanced enough to convert the scheme above into an actual script, but I am sure many of you can. My reputation points on here are pretty low, but I will gladly award the most helpful answer with the highest bounty I can set. References: http://www.formortals.com/introducing-cnb-imageguide/, http://www.turnkeylinux.org/blog/png-vs-jpg Edit: Also see my comments below for some more information on why I think this script would be the best solution to the problem I am facing.

  Read the article

• Error codes 80070490 and 8024200D in Windows Update

  - by Sammy

  How do get past these stupid errors? The way I have set things up is that Windows Update tells me when there are new updates available and then I review them before installing them. Yesterday it told me that there were 11 new updates. So I reviewed them and I saw that about half of them were security updates for Vista x64 and .NET Framework 2.0 SP2, and half of them were just regular updates for Vista x64. I checked them all and hit the Install button. It seemed to work at first, updates were being downloaded and installed, but then at update 11 of 11 total it got stuck and gave me the two error codes you see in the title. Here are some screenshots to give you an idea of what it looks like. This is what it looks like when it presents the updates to me. This is how it looks like when the installation fails. I'm not sure if you're gonna see this very well but these are the updates it's trying to install. Update: This is on Windows Vista Ultimate 64-bit with integrated SP2, installed only two weeks ago on 2012-10-02. Aside from this, the install is working flawlessly. I have not done any major changes to the system like installing new devices or drivers. What I have tried so far: - I tried installing the System Update Readiness Tool (the correct one for Vista x64) from Microsoft. This did not solve the issue. Microsoft resource links: Solutions to 80070490 Windows Update error 80070490 System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008 Solutions to 8024200D: Windows Update error 8024200d Essentially both solutions tell you to install the System Update Readiness Tool for your system. As I have done so and it didn't solve the problem the next step would be to try to repair Windows. Before I do that, is there anything else I can try? Microsoft automatic troubleshooter If I click the automatic troubleshooter link available on the solution web page above it directs me to download a file called windowsupdate.diagcab. But after download this file is not associated to any Windows program. Is this the so called Microsoft Fix It program? It doesn't have its icon, it's just blank file. Does it need to be associated? And to what Windows program?

  Read the article

• Veewee, Vagrant, Puppet, Erlang and RabbitMQ

  - by Tobias

  I am kinda stuck with a problem I am trying to wrap my head around for days now. Here is what I am doing: By using Veewee, I am creating a VirtualBox image and then I create a Vagrant box from it. See here, here Finally I run puppet from Vagrant to install RabbitMQ, see here. Veewee, Vagrant and VirtualBox all run on MacOS X 10.7.4. The vagrant box itself is CentOS 6.2. This worked fine for quite some time until I was recreating the VirtualBox image a couple of days ago. During installation of the rabbitmq-plugins during my puppet run I now get the following error: /Stage[main]/Rabbitmq/Exec[rabbitmq-plugins]/returns: erlexec: HOME must be set My RabbitMQ puppet configuration can be found on my GitHub repo for that project, but here is the most important part: $version = "2.8.7" $url = "http://www.rabbitmq.com/releases/rabbitmq-server/v${version}/rabbitmq-server-${version}-1.noarch.rpm" package{"erlang": ensure => "present", } package{"rabbitmq-server": provider => "rpm", source => $url, require => Package["erlang"] } exec{"rabbitmq-plugins": path => "/usr/bin:/usr/sbin:/bin", command => "rabbitmq-plugins enable rabbitmq_management", require => Package["rabbitmq-server"] } My additional repositories, e.g. epel, are defined in veewees postinstall.sh right at the top of the file. Finally, this is what I get when I do '/etc/init.d/rabbitmq-server status' [{pid,2834}, {running_applications,[{rabbit,"RabbitMQ","2.8.7"}, {ssl,"Erlang/OTP SSL application","4.1.6"}, {public_key,"Public key infrastructure","0.13"}, {crypto,"CRYPTO version 2","2.0.4"}, {mnesia,"MNESIA CXC 138 12","4.5"}, {os_mon,"CPO CXC 138 46","2.2.7"}, {sasl,"SASL CXC 138 11","2.1.10"}, {stdlib,"ERTS CXC 138 10","1.17.5"}, {kernel,"ERTS CXC 138 10","2.14.5"}]}, {os,{unix,linux}}, {erlang_version,"Erlang R14B04 (erts-5.8.5) [source] [64-bit] [rq:1] [async-threads:30] [kernel-poll:true]\n"}, {memory,[{total,24993120}, {processes,10328496}, {processes_used,10321296}, {system,14664624}, {atom,1175905}, {atom_used,1143841}, {binary,17192}, {code,11416020}, {ets,766168}]}, {vm_memory_high_watermark,0.4}, {vm_memory_limit,205851852}, {disk_free_limit,1000000000}, {disk_free,7089795072}, {file_descriptors,[{total_limit,924}, {total_used,4}, {sockets_limit,829}, {sockets_used,2}]}, {processes,[{limit,1048576},{used,131}]}, {run_queue,0}, {uptime,6}] Sources in the web suggest, that I have to set HOME. Of course I was logging into the box if HOME was set, for user vagrant it was '/home/vagrant' and for root it was 'root'. As always, any hints/ideas/suggestions/assumptions are more than welcome. Thanks a lot! Cheers, Tobi

  Read the article

• How can you know what is w3wp.exe doing? (or how to diagnose a performance problem)

  - by Daniel Magliola

  I'm having a performance problem in a site we've made, and I'm not exactly sure how to start diagnosing it. The short description is: We have a very small site (http://hearablog.com) with very little traffic, in a crappy dedicated server, CPU is always very high, sometimes it stays at 100% for minutes, and w3wp.exe is taking most of it. A typical scenario is w3wp.exe takes 60%, and SQL Server takes about 30%. Our DB is pretty small too. Long description and more details: The site is hosted in a very crappy server by Cari.Net. From the beginning we had the feeling that the server didn't quite behave correctly, like some things would take just too long, so this could be a configuration problem from the get go. It may also be that we are getting a virtual server while we're supposed to have a dedicated one, although we have no evidence that'd indicate this, except for the fact that the server tends to be quite slow. The server is Windows 2008 Standard 64-bit, with SQL 2008 Express Hardware is a Celeron 2.80 GHz, 1Gb RAM The website is developed in ASP.Net MVC, using Entity Framework for data access. Now, this is pretty crappy hardware, but i've had other servers with these guys, with equivalent (or worse) HW, and performance is much better than this one. That said, the other servers have W2003 and SQL2005, and I'm using ASP.Net "WebForms" 2.0, no MVC, no LINQ, no EF; so I'm not sure whether going to 2008 / the other stuff means a big performance penalty is expected. I'm serving MP3 files (5-20 Mb) regularly, which is a slightly unusual load, maybe that is causing some kind of problems? Would that cause w3wp to use a lot of CPU? Disk usage seems very low. Memory is usually around 90%, but disk usage seems to indicate it's not paging much. I get tons of e-mails every day about SQL timeouts, for queries taking over 30 seconds, although all our queries are pretty straightforward (or should be, but EF may be screwing it up). This is what resource monitor looks like in one of these "sprints" of 100% CPU, in case there's anything useful there. And a snapshot of some performance counters: Now, what confuses me very much is that CPU usage of w3wp is just so high. It shouldn't be doing much really... So my questions are... Is there any way of finding out "what" it is doing? Maybe even profile it? Any performance counters I should be looking at? Is this to be expected given this hardware/software configuration? Is this could be cause by some kind of configuration failure, where would you start looking? Thank you VERY much. Daniel Magliola

  Read the article

• How to reinstall Mac OS X on OS X/Linux dual-boot system?

  - by strangeronyourtrain

  My setup: I have a MacBook Pro 5,5 with a Mac OS X Snow Leopard partition and a Linux partition. I use rEFIt to boot into Linux. I didn't use Boot Camp when I originally installed Linux; instead, I manually created the partition (with either Disk Utility in OS X or Gparted on a Linux live CD--I don't recall which one) and then installed Linux on it from a live CD. The problem: My OS X partition is corrupt, and I need to reinstall Snow Leopard. Since I installed rEFIt from within OS X, I'm concerned that wiping the OS X partition will prevent me from booting into my Linux partition. How can I do this without losing access to my Linux partition? Is it possible to install Snow Leopard on the partition I reserved for it, or will it automatically overwrite the entire drive? And if I do the fresh OS X install and then install rEFIt again, will it automatically recognize my Linux partition? Thanks for any tips! Specs: MacBook Pro 5,5 (Mid-2009); Snow Leopard 10.6.7/64-bit Sabayon Linux, 2.6.36 kernel EDIT/UPDATE: Thanks, but the situation has taken a more complicated turn: I tried to reinstall Snow Leopard from the DVD, but it refused to install onto my Mac partition, claiming: "The disk cannot be used to start up your computer." Disk Utility wouldn't let me resize the partition or create a new one, and it doesn't see my Linux partition. It only displays the two partitions "Macintosh HD" and Linux Swap. I can, however, see all the partitions from Linux. This is the partition table as shown in Gparted: And the output of "fdisk -l" is: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 409639 204819+ ee GPT /dev/sda2 409640 349590464 174590412+ af HFS / HFS+ /dev/sda3 483122745 488392064 2634660 82 Linux swap / Solaris /dev/sda4 * 349590465 483122744 66766140 83 Linux Partition table entries are not in disk order I wonder if this is because I originally partitioned my disk with Gparted instead of OS X's Disk Utility (at this point, I don't recall whether I used Gparted or Disk Utility). In any case, it doesn't seem safe to do any reformatting with Disk Utility now, as I'm afraid it will wipe sda2 ("Macintosh HD") as well as sda4 (my Linux partition). So... I'm hoping to find a solution that doesn't involve wiping my entire hard disk. Would it be safe/possible to use Gparted to erase sda2 ("Macintosh HD") and then use the Snow Leopard DVD to install OS X onto [I]just[/I] sda2 without touching the other partitions? Thanks for any insight!

  Read the article

• Bidirectional real-time sync of large file tree between two distant linux servers

  - by dlo

  By large file tree I mean about 200k files, and growing all the time. A relatively small number of files are being changed in any given hour though. By bidirectional I mean that changes may occur on either server and need to be pushed to the other, so rsync doesn't seem appropriate. By distant I mean that the servers are both in data centers, but geographically remote from each other. Currently there are only 2 servers, but that may expand over time. By real-time, it's ok for there to be a little latency between syncing, but running a cron every 1-2 minutes doesn't seem right, since a very small fraction of files may change in any given hour, let alone minute. EDIT: This is running on VPS's so I might be limited on the kinds of kernel-level stuff I can do. Also, the VPS's are not resource-rich, so I'd shy away from solutions that require lots of ram (like Gluster?). What's the best / most "accepted" approach to get this done? This seems like it would be a common need, but I haven't been able to find a generally accepted approach yet, which was surprising. (I'm seeking the safety of the masses. :) I've come across lsyncd to trigger a sync at the filesystem change level. That seems clever though not super common, and I'm a bit confused by the various lsyncd approaches. There's just using lsyncd with rsync, but it seems this could be fragile for bidirectionality since rsync doesn't have a notion of memory (eg- to know whether a deleted file on A should be deleted on B or whether it's a new file on B that should be copied to A). lipsync appears to be just a lsyncd+rsync implementation, right? Then there's using lsyncd with csync2, like this: http://www.axivo.com/community/threads/lightning-fast-synchronization-with-csync2-and-lsyncd.121/ ... I'm leaning towards this approach, but csync2 is a little quirky, though I did do a successful test of it. I'm mostly concerned that I haven't been able to find a lot of community confirmation of this method. People on here seem to like Unison a lot, but it seems that it is no longer under active development and it's not clear that it has an automatic trigger like lsyncd. I've seen Gluster mentioned, but maybe overkill for what I need? UPDATE: fyi- I ended up going with the original solution I mentioned: lsyncd+csync2. It seems to work quite well, and I like the architectural approach of having the servers be very loosely joined, so that each server can operate indefinitely on its own regardless of the link quality between them.

  Read the article

• OSX 10.6.6 SSH md5 break-in check

  - by Alex

  Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

  Read the article

• How can I troubleshoot a "Hardware Malfunction" blue screen?

  - by AaronSieb

  My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

  Read the article

• Benchmarking hosting providers IO with Bonnie

  - by Derek Organ

  Ok, because of a bunch of projects I'm working on I've access to dedicated Servers on a 3 hosting providers. As an experiment and for educational purposes I decided to see if I could benchmark how good the IO is with each. Bit of research lead me to Bonnie++ So I installed it on the server and ran this simple command /usr/sbin/bonnie -d /tmp/foo The 3 machines in different hosting providers are all dedicated machines, one is a VPS, other two are on some cloud platform e.g. VMWare / Xen using some kind of clustered SAN for storage This might be a naive thing to do but here are the results I found. HOST A Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxxxxx 1G 45081 88 56244 14 19167 4 20965 40 67110 6 67.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 15264 28 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ xxxxxxxx,1G,45081,88,56244,14,19167,4,20965,40,67110,6,67.2,0,16,15264,28,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++ HOST B Version 1.03d ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxx 4G 43070 91 64510 15 19092 0 29276 47 39169 0 448.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 24799 52 +++++ +++ +++++ +++ 25443 54 +++++ +++ +++++ +++ xxxxxxx,4G,43070,91,64510,15,19092,0,29276,47,39169,0,448.2,0,16,24799,52,+++++,+++,+++++,+++,25443,54,+++++,+++,+++++,+++ HOST C Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxx 1536M 15598 22 85698 13 258969 20 16194 22 723655 21 +++++ +++ ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 14142 22 +++++ +++ 18621 22 13544 22 +++++ +++ 17363 21 xxxxxxxx,1536M,15598,22,85698,13,258969,20,16194,22,723655,21,+++++,+++,16,14142,22,+++++,+++,18621,22,13544,22,+++++,+++,17363,21 Ok, so first off what is the best way to read the figures and are there any issues with really comparing these numbers? Is this in any way a true representation of IO Speed? If not is there any way for me to test that? Note: these 3 machines are using either Ubuntu or Debian (I presume that doesn't really matter)

  Read the article

• Using a 64bit Linux kernel, can't see more than 4GB of RAM in /proc/meminfo

  - by Chris Huang-Leaver

  I'm running my new computer which has 8GB of RAM installed, which is visable from BIOS page, does not show in /proc/meminfo uname -a Linux localhost 3.0.6-gentoo #2 SMP PREEMPT Sat Nov 19 10:45:22 GMT-- x86_64 AMD Phenom(tm) II X4 955 Processor AuthenticAMD GNU/Linux The result of /proc/meminfo is as follows: (thans Andrey) MemTotal: 4021348 kB MemFree: 1440280 kB Buffers: 23696 kB Cached: 1710828 kB SwapCached: 4956 kB Active: 1389904 kB Inactive: 841364 kB Active(anon): 1337812 kB Inactive(anon): 714060 kB Active(file): 52092 kB Inactive(file): 127304 kB Unevictable: 32 kB Mlocked: 32 kB SwapTotal: 8388604 kB SwapFree: 8047900 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 492732 kB Mapped: 47528 kB Shmem: 1555120 kB Slab: 267724 kB SReclaimable: 177464 kB SUnreclaim: 90260 kB KernelStack: 1176 kB PageTables: 12148 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 10399276 kB Committed_AS: 3293896 kB VmallocTotal: 34359738367 kB VmallocUsed: 317008 kB VmallocChunk: 34359398908 kB AnonHugePages: 120832 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 23552 kB DirectMap2M: 3088384 kB DirectMap1G: 1048576 kB I have tried using mem=8G as a kernel boot parameter, I read a post about setting HIGHMEM64G to yes, before realising that only applies to 32bit kernels. Trying dmindecode -t memory SMBIOS 2.7 present. Handle 0x0026, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0028, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: Array1_PartNumber0 Rank: Unknown Handle 0x002A, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: Array1_PartNumber1 Rank: Unknown Handle 0x002C, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: BANK2 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer2 Serial Number: SerNum2 Asset Tag: AssetTagNum2 Part Number: Array1_PartNumber2 Rank: Unknown Handle 0x002E, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: BANK3 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer3 Serial Number: SerNum3 Asset Tag: AssetTagNum3 Part Number: Array1_PartNumber3 Rank: Unknown

  Read the article

• What is a good layout for a somewhat advanced home network and storage solution?

  - by Shaun

  My home network/storage needs are changing and I am searching for some opinions and starting points on what a good network/storage layout would be that can serve my needs for a few years into the future. I think I have a decent starting point for equipment, but I am also willing to invest fairly heavily in a solution that can last me for a while. I am a bit of a tech nerd and I have a moderate tolerance for setup of the solution. I would prefer if maintenance of the system is somewhat low once it is setup, but I am willing to accept some tradeoffs. Existing equipment: Router - Netgear WNDR3700 (gigabit) Router - DLink Gamerlounge DGL-4300 (gigabit) Switch - 16 port Trendnet green switch (gigabit) Switch - 5 port Trendnet green (gigabit) Computer - i7-950 office computer (gigabit ethernet) Computer - Q6600 quad core media center, hooked up to TV, records shows (gigabit ethernet) Computer - Acer 1810T ultraportable laptop (gigabit and N ethernet) NAS - Intel SS4200-E (gigabit) External hard drive - 2TB WD Green drive (esata) All kinds of miscellaneous network connected TV, Bluray, Verizon network extender, HDhomerun TV tuners, etc. Requirements: -Robust backup solution for a growing collection of huge family picture files and personal files, around 1.5TB. (Including offsite backup) -Central location for all user's files, while also keeping them secure from each other. -Storage for terabytes of movie backups and recorded TV, and access to them from all computers (maybe around 4TB eventually) -Possibility to host files to friends and family easily Nice to have: -Backup of terabytes of movie backups Intriguing possibilities: -Capability to have users' Windows desktops and files look the same from all network computers I am not sure if the new Windows Home Server 2011 would fit into this well, if I need a domain server, how best to organize my backups, or how to most effectively use RAID. Currently I am simply backing up all computers to a RAID 1 on the NAS box, which I was thinking could prevent a situation where I reach for a backup and find that the disk is corrupt. One possibility that I am thinking about now is simply using my media center PC with a huge RAID of hard drives on which all files are stored. Pseudo-backup of all files would be present because of the RAID, but important files would also be backed up off site via carrying hard drives to work. But what if corruption seeps into the files and the corrupted data is then backed up? Does RAID protect against this? I really want to take next to zero risks with the irreplaceable files. I can handle some degree of risk with the movies and other files. I'm looking for critiques on this idea as well as other possibilities. To summarize, my goal is high functionality, media capable, and robust backup of irreplaceable files.

  Read the article

• missing files after reassemble of RAID-5

  - by Kris_R

  I had to open my file-server's housing on Sunday to replace a faulty fan. What I didn't see was that one of the sata-cables was not properly connected. The 1st thing I did after a reboot was a check of the RAID status and it showed immediately that one drive is missing. Till this moment the device was not used (however it was mounted, so I'm not 100% sure that system did nothing). I stopped md0 and re-plugged the cable: mdadm --stop /dev/md0 poweroff After another reboot I checked the removed drive: mdadm --examine /dev/sdd1 ... Checksum : 3276bc1d - correct Events : 315782 Layout : left-symmetric Chunk Size : 32K Number Major Minor RaidDevice State this 0 8 49 0 active sync /dev/sdd1 0 0 8 49 0 active sync /dev/sdd1 1 1 8 65 1 active sync /dev/sde1 2 2 8 33 2 active sync /dev/sdc1 3 3 8 17 3 active sync /dev/sdb1 I was a bit surprised that it was shown as active (even if earlier mdadm said, that this device was removed from array) and its checksum was OK. I recreated RAID with: mdadm --assemble /dev/md0 --scan The command mdadm --detail /dev/md0 showed that all drives were running and system was in "clean" state. I mounted the device md0 and then came hic-cup. I wanted to work on one of the last files that I had been using before all the situation and it was not there. In another place I missed actually all files from the directory where I was working. As far as I can see most of the files that are older than a few days are intact but some newer ones are missing. Now the big question: what would be your advice? Is there a way to get these data? I thought about removing the drive that was earlier labeled by mdadm and rebuild array with another empty HDD. I've found that after re-assemble the "broken" drive has another label (changed from sdd to sdb). Can this have influence on rebuilt process? If yes, how to reassemble the array properly? I'm sure the SATA-cables are connected still in the same order to the controller. p.s. Please no advises like "restore from backup". I'm doing back-ups on Sunday's night and this happened in the late afternoon, so backup is not really options for me. p.s.s. I asked this question on Unix&Linux but no answer came up during last two days. I'm getting quite anxious. Sorry for duplicating if any of you reading the other forum.

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• Multi-Role Domain Controllers for Small Offices (< 50 clients)

  - by kce

  Warning: I'm a Linux/*NIX admin so this is all new to me. I understand that it's not considered a good idea to have only a single domain controller, and that it is also probably a good idea for a domain controller to only do AD/DHCP/DNS (Here). We have two offices, location A with 30 users and location B with 10 users. Our two offices are separated by a WAN that is not particularly robust so I have be instructed that we need to have standalone services in each office. This means that according to "best practices" we will need to build a domain controller and a separate file server in each office. Again, I am not knowledgeable in the ways of Windows but this seems a little unnecessary for an organization of 40 users. People have commented that I could "get away with" running file services on the domain controller as long as the "load is light". That just seems to generate more questions than it answers. What constitutes light load? What are the potential consequences of mixing these roles? Ideally I would prefer to only have one physical machine at each location. The one in location A (the location with IT staff) can act as the primary domain controller and the one in the smaller office can act as the backup domain controller. If either domain controller fails we can still use the other one for authentication (albeit with some latency) and if the WAN connection fails each office still has access to their respective "local" domain controller. If the file services are ALSO run on each server (and synchronized with something like DFS), a similar arrangement in terms of redundancy can be had without having to purchase, build and install two additional separate servers. It's not that I'm adverse to that (well, any more adverse than I am to whole thing to begin with) but to my simple mind it just seems, well a bit overkill. I can definitely see the benefits of functional separation when we're talking larger organizations, but I need to consider the additional overhead too. None of this excludes having a DRP setup for the domain controller/s. I assume you can lose two domain controllers just as easily as one.

  Read the article

• Why is 50.22.53.71 hitting my localhost node.js in an attempt to find a php setup

  - by laggingreflex

  I just created a new app using angular-fullstack yeoman generator, edited it a bit to my liking, and ran it with grunt on my localhost, and immediately upon starting up I get this flood of requests to paths that I haven't even defined. Is this a hacking attempt? And if so, how does the hacker (human or bot) immediately know where my server is and when it came online? Note that I haven't made anything online, it's just a localhost setup and I'm merely connected to the internet. (Although my router does allow 80 port incoming.) Whois shows that the IP address belongs to a SoftLayer Technologies. Never heard of it. Express server listening on 80, in development mode GET / [200] | 127.0.0.1 (Chrome 31.0.1650) GET /w00tw00t.at.blackhats.romanian.anti-sec:) [404] | 50.22.53.71 (Other) GET /scripts/setup.php [404] | 50.22.53.71 (Other) GET /admin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /admin/pma/scripts/setup.php [404] | 50.22.53.71 (Other) GET /admin/phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /db/scripts/setup.php [404] | 50.22.53.71 (Other) GET /dbadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /myadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /mysql/scripts/setup.php [404] | 50.22.53.71 (Other) GET /mysqladmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /typo3/phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin1/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin2/scripts/setup.php [404] | 50.22.53.71 (Other) GET /pma/scripts/setup.php [404] | 50.22.53.71 (Other) GET /web/phpMyAdmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /xampp/phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /web/scripts/setup.php [404] | 50.22.53.71 (Other) GET /php-my-admin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /websql/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin-2/scripts/setup.php [404] | 50.22.53.71 (Other) GET /php-my-admin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin-2.5.5/index.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin-2.5.5-pl1/index.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin/ [404] | 50.22.53.71 (Other) GET /phpmyadmin/ [404] | 50.22.53.71 (Other) GET /mysqladmin/ [404] | 50.22.53.71 (Other)

  Read the article

• How to deny the web access to some files?

  - by Strae

  I need to do an operation a bit strange. First, i run on Debian, apache2 (which 'runs' as user www-data) So, I have simple text file with .txt ot .ini, or whatever extension, doesnt matter. These files are located in subfolders with a structure like this: www.example.com/folder1/car/foobar.txt www.example.com/folder1/cycle/foobar.txt www.example.com/folder1/fish/foobar.txt www.example.com/folder1/fruit/foobar.txt therefore, the file name always the same, ditto for the 'hierarchy', just change the name of the folder: /folder-name-static/folder-name-dinamyc/file-name-static.txt What I should do is (I think) relatively simple: I must be able to read that file by programs on the server (python, php for example), but if I try to retrieve the file contents by broswer (digiting the url www.example.com/folder1/car/foobar.txt, or via cUrl, etc..) I must get a forbidden error, or whatever, but not access the file. It would also be nice that even accessing those files via FTP are 'hidden', or anyway couldnt be downloaded (at least that I use with the ftp root and user data) How can I do? I found this online, be put in the file .htaccess: <Files File.txt> Order allow, deny Deny from all </ Files> It seems to work, but only if the file is in the web root (www.example.com / myfile.txt), and not in subfolders. Moreover, the folders in the second level (www.example.com/folder1/fruit/foobar.txt) will be dinamycally created.. I would like to avoid having to change .htaccess file from time to time. It is possible to create a rule, something like that, that goes for all files with given name, which is on www.example.com/folder-name-static/folder-name-dinamyc/file-name-static.txt, where those parts are allways the same, just that one change ? EDIT: As Dave Drager said, i could semplify this keeping those file outside the web accessible directory. But those directory's will contain others files too, images, and stuff used by my users, so i'm simply try to not have a duplicate folders system, like: /var/www/vhosts/example.com/httpdocs/folder1/car/[other folders and files here] /var/www/vhosts/example.com/httpdocs/folder1/cycle/[other folders and files here] /var/www/vhosts/example.com/httpdocs/folder1/fish/[other folders and files here] //and, then for the 'secrets' files: /folder1/data/car/foobar.txt /folder1/data/cycle/foobar.txt /folder1/data/fish/foobar.txt

  Read the article

• IIS can't load Oracle.Web assembly (for ASP.NET membership provider)

  - by Konamiman

  I am trying to configure an IIS web site to use an Oracle database for ASP.NET membership, but I can't get it to work. IIS doesn't seem to be able to load the assembly containing the Oracle membership provider. That's what I have so far: An Oracle 10g database online and with all the tables for ASP.NET membership created. Windows 2008 R2 Standard with the web server role installed, including support for ASP.NET. Oracle 11g Release 2 ODAC 11.2.0.1.2 installed. The installed components are: Oracle data provider for .NET, Oracle providers for ASP.NET, Oracle instant client. The default web site on IIS (I am using that for testing) has the following web.config file: <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <membership defaultProvider="OracleMembershipProvider"> <providers> <remove name="SqlMembershipProvider" /> <add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider, Oracle.Web, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OracleServer" /> </providers> </membership> </system.web> </configuration> (Additional attributes on the "add" element omitted for brevity. Also, the connection string is defined for the whole server.) The Oracle.Web.dll file is on the GAC. That's the relevant part of the C:\Windows\Assembly folder: The web site application pool is configured for .NET 2.0, and has 32-bit applications enabled. I have allowed untrusted providers in the IIS' administration.config file (just for the sake of testing, I'll explicitly add the assembly to the trusted providers list later). With all of this setup in place, when I click on the ".NET Users" icon on the IIS manager, I get a warning about the provider having too much privileges, and when I accept I get the following message: There was an error while performing this operation. Details: Could not load file or assembly 'Oracle.Web, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified. So, what am I missing? How can I get the Oracle membership provider to work? Thank you! UPDATE: It seems that the problem is not with IIS itself, but with the IIS administrator only. When using the web site configuration tool provided by Visual Studio, everything works fine.

  Read the article

• Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

  - by Ben Campbell

  Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

  Read the article

< Previous Page | 754 755 756 757 758 759 760 761 762 763 764 765  | Next Page >