Daily Archives

Articles indexed Saturday March 24 2012

Page 1/13 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Group Policy Task Schedule deployed to User Configuration not working, works when in Computer Configuration?

  - by user80130

  I added a Scheduled Task on my Windows 2008 R2 Domain Controller in the Group Policy Manager: MyDomain Policy User Configuration Preferences Control Panel Settings Scheduled Tasks Basic Task, like starting notepad, when user unlocks his workstation. This should show up in the client workstation's task scheduler, but it dosn't. No errors or anything like that. If I use the "Computer Configuration" instead of "User Configuration" the task appears, and I'm able to run the task. I've tried the gpupdate /force followed by gpresult and checked the report, but it dosn't contain the GPO Scheduled Tasks I created? (again, does show up when using "Computer Configuration".) The issue is that I have to run the application in the current users context, and only on a specific Employee OU, and thereby limit this task only to Employee Workstations and not apply the application when the same employee log on to internal servers and such. Primary domain dontroller is a Windows 2008 R2, workstations Windows 7 Enterprise. What am I doing wrong ?

  Read the article

• Sticky connection and HTTPS support for HAProxy

  - by Saif

  We have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 apache nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file. global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend main *:5000 acl url_static path_beg -i /static /images /javascript /stylesheets acl url_static path_end -i .jpg .gif .png .css .js use_backend static if url_static default_backend app #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- backend static balance roundrobin server static 127.0.0.1:4331 check #--------------------------------------------------------------------- # round robin balancing between the various backends #--------------------------------------------------------------------- backend app listen ha-http 10.190.1.28:80 mode http stats enable stats auth admin:xxxxxx balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /haproxy.txt HTTP/1.0 server apache1 portal-04:80 cookie A check server apache2 im-01:80 cookie B check server apache3 im-02:80 cookie B check server apache4 im-03:80 cookie B check Please advice. Thanks for your help in advance.

  Read the article

• How to change the default domain controller when querying AD in a different site?

  - by Linefeed

  We have 2 different locations, and at both site we have multiple domain controllers (Win2008). In our application we use Serverless Binding to execute our LDAP queries http://msdn.microsoft.com/en-us/library/ms677945(v=vs.85).aspx. If we look at de DnsHostName of the LDAP://RootDse on site B we always get the default domain controller of site A. Therefor all LDAP queries go much slower. Is there a way to change the default domain controller per site ?

  Read the article

• libvirt qemu/kvm migration problem

  - by Panda

  I am using kvm and libvirt on my Dell server. Now i am trying to migrate one virtual machine from a physical server to another. However, I failed everytime. In virsh on physicalServer1, I typed: virsh # migrate virtualmachine1 qemu+ssh://username@physicalServer2/system error: operation failed: migration to 'tcp:physicalServer2:49163' failed: migration failed Then I searched FAQ part on libvirt.org. It says: error: operation failed: migration to '...' failed: migration failed This is an error often encountered when trying to migrate with QEMU/KVM. This typically happens with plain migration, when the source VM cannot connect to the destination host. You will want to make sure your hosts are properly configured for migration (see the migration section of this FAQ) I managed to ssh physicalServer2 from a shell on virtualmachine1 so the above red part did not explain my failure. I also open ports on physicalServer2, iptables -L shows following information: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT tcp -- anywhere anywhere state NEW tcp dpts:49152:49215 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination The /var/log/libvirt/qemu/virtualmachine1.log on physicalServer2: 2011-05-06 13:37:30.708: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 2048 -smp 1,sockets=1,cores=1,threads=1 -name openjudge-test -uuid a8c704bc-a4f9-90db-3e57-40e60b00aac1 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/virtualmachine1.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -rtc base=utc -boot c -drive file=/media/nfs/virtualmachine1.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=00:16:36:8a:22 :a0,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:2 -vga cirrus -incoming tcp:0.0.0.0:49163 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/0 2011-05-06 13:37:30.915: shutting down The /var/log/libvirt/qemu/virtualmachine1.log on physicalServer1 is empty. Both physical servers are using Ubuntu 11.04. The libvirt and kvm used are installed by apt-get. The libvirt version is 0.8.8.

  Read the article

• OpenVPN not with Windows 7 PCs on client Lan

  - by Rohan

  I have a setup with a router running OpenWRT with an openvpn client. Windows 7 pc's cannot access the vpn. They time out trying to access servers on the VPN. The mystery to me is that the setup works fine for my laptop running ubuntu. I can access the VPN without any issues. I previously had a router running Tomato with the same openvpn setup and all the computers could access the VPN. What could account for the difference in behaviour? Is there something I am missing in the OpenWRT setup that is required for windows networking that is on by default with tomato? To clarify the OpenVPN client is on the OpenWRT router. The client connects to the OpenVPN server. But when I try to access the VPN from Windows computers on my network I cannot.

  Read the article

• 32bit SQLServer with AWE NOT enabled. Buffer Cache Hit Ratio High, Disk Read Queue VERY HIGH, WHY?

  - by chenwq

  We have a "SQLServer 2005 SP3 32bit Enterprise Edition" running on a 32 bit Windows 2003 32bit Enterprise Edition 12GB RAM with AWE enabled using RAID5(5 pysical disks). We tuned AWE to enabled and restart sqlserver this afternoon after work, hope the performance will be better than old time. But there is something that we are very confused. On working days, SQLServer has a very bad performance. When we are looking for reasons, we check Windows Performance counter. Avg. Disk Read Queue Lenght > 140 Avg. Disk Write Queue Length < 1 SQL Server Buffer Cache Hit Ratio > 96% %Processor Time < 30% SQL Server Total Server Memory < 1.8G Obviously, without AWE enabled, SQL Server can use only less than 2G memory. My Question is: why "SQL Server Total server Memory" is less than 2G?I think SQL Server will use all 2G process address space. Does this counter count anything out? we known that sql server is sufferring lack of memory, but why "buffer hit ratio“ is as high as 96? Any advice is welcomed!

  Read the article

• sudo ./starling start works well but sudo service starling start fails

  - by Keating Wang

  sudo ./starling start works well but sudo service starling start fails $ sudo ./starling start * Starting Starling Server... [ OK ] $ sudo ./starling stop * Stop Starling Server... [ OK ] $ sudo service starling stop * Starting Starling Server... /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:247:in `to_specs': Could not find starling (>= 0) amongst [minitest-1.6.0, rake-0.8.7, rdoc-2.5.8] (Gem::LoadError) from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:256:in `to_spec' from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems.rb:1229:in `gem' from /home/keating/.rvm/gems/ruby-1.9.2-p290/bin/starling:18:in `<main>' The error above is 'cannot find gem starling' Following the starling file(located in /etc/init.d, rwxrwxrwx): set -e LOGFILE=/var/log/starling/starling.log SPOOLDIR=/var/spool/starling PORT=22122 LISTEN=127.0.0.1 PIDFILE=/var/run/starling.pid NAME=starling DESC="Starling" INSTALL_DIR=/home/keating/.rvm/gems/ruby-1.9.2-p290/bin/ DAEMON=$INSTALL_DIR/$NAME SCRIPTNAME=/etc/init.d/$NAME OPTS="-d" . /lib/lsb/init-functions d_start() { log_begin_msg "Starting Starling Server..." start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- $OPTS || log_end_msg 1 log_end_msg 0 } d_stop() { log_begin_msg "Stopping Starling Server..." start-stop-daemon --stop --quiet --pidfile $PIDFILE || log_end_msg 1 log_end_msg 0 } case "$1" in start) d_start ;; stop) d_stop ;; restart|force-reload|reload) d_stop sleep 2 d_start ;; *) echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" exit 3 ;; esac exit 0

  Read the article

• java.lang.OutOfMemoryError on ec2 machine

  - by vinchan

  I have a java app on a large instance that will spawn up to 800 threads. I can run the application fine as user "root" but not as another user which I created. I get the deadly. java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:657) at java.util.concurrent.ThreadPoolExecutor.addWorker(ThreadPoolExecutor.java:943) at java.util.concurrent.ThreadPoolExecutor.execute(ThreadPoolExecutor.java:1325) nightmare. I have tried increasing the stack size already in limits.conf to no avail. Please, help me out. What is different here for the root and other user?

  Read the article

• Where is the actual content in a TCP segment

  - by packetloss

  When I email something or download a program, or do anything else over a network, where in the segment is the actual content? If I am emailing a 20KB word document, and the maximum data field size in a segment is 1500 bytes, does that mean it takes about 14 segments to mail my document wherever it is going? I get, I think, the OSI model and I have a decent grasp of the IP protocol. I think I understand the concept of header wrapping of each successive layer in the protocol stack. What I can't get a definitive answer to is where does the actual content go in a TCP segment? Is that the datagram? Maybe the fact I am asking proves I have no clue... Many thanks.

  Read the article

• how to change port number of Apache server in windows OS

  - by jesop

  I have installed xampp control panel and Apache 2.2 on windows XP when I type http://localhost/ gives me page which says It Works! Now, I want to change the port number 80 to some other number How to change it ? in how many files does it needs to be changed ? dose it require to restart the system to change to take effect ? Note: I have changed port number in C:\xampp\apache\conf\httpd.conf in two places where it says Listen 80 and ServerName localhost:80 Pls help, thanks.

  Read the article

• Network authentication + roaming home directory - which technology should I look into using?

  - by Brian

  I'm looking into software which provides a user with a single identity across multiple computers. That is, a user should have the same permissions on each computer, and the user should have access to all of his or her files (roaming home directory) on each computer. There seem to be many solutions for this general idea, but I'm trying to determine the best one for me. Here are some details along with requirements: The network of machines are Amazon EC2 instances running Ubuntu. We access the machines with SSH. Some machines on this LAN may have different uses, but I am only discussing machines for a certain use (running a multi-tenancy platform). The system will not necessarily have a constant amount of machines. We may have to permanently or temporarily alter the amount of machines running. This is the the reason why I'm looking into centralized authentication/storage. The implementation of this effect should be a secure one. We're unsure if users will have direct shell access, but their software will potentially be running (under restricted Linux user names, of course) on our systems, which is as good as direct shell access. Let's assume that their software could potentially be malicious for the sake of security. I have heard of several technologies/combinations to achieve my goal, but I'm unsure of the ramifications of each. An older ServerFault post recommended NFS & NIS, though the combination has security problems according to this old article by Symantec. The article suggests moving to NIS+, but, as it is old, this Wikipedia article has cited statements suggesting a trending away from NIS+ by Sun. The recommended replacement is another thing I have heard of... LDAP. It looks like LDAP can be used to save user information in a centralized location on a network. NFS would still need to be used to cover the 'roaming home folder' requirement, but I see references of them being used together. Since the Symantec article pointed out security problems in both NIS and NFS, is there software to replace NFS, or should I heed that article's suggestions for locking it down? I'm tending toward LDAP because another fundamental piece of our architecture, RabbitMQ, has a authentication/authorization plugin for LDAP. RabbitMQ will be accessible in a restricted manner to users on the system, so I would like to tie the security systems together if possible. Kerberos is another secure authentication protocol that I have heard of. I learned a bit about it some years ago in a cryptography class but don't remember much about it. I have seen suggestions online that it can be combined with LDAP in several ways. Is this necessary? What are the security risks of LDAP without Kerberos? I also remember Kerberos being used in another piece of software developed by Carnegie Mellon University... Andrew File System, or AFS. OpenAFS is available for use, though its setup seems a bit complicated. At my university, AFS provides both requirements... I can log in to any machine, and my "AFS folder" is always available (at least when I acquire an AFS token). Along with suggestions for which path I should look into, does anybody have any guides which were particularly helpful? As the bold text pointed out, LDAP looks to be the best choice, but I'm particularly interested in the implementation details (Keberos? NFS?) with respect to security.

  Read the article

• Install MegaCli to Monitor Perc 5/i in Nexentastor 3

  - by Peter Valadez

  I have a Dell 2950 with a Perc 5/i Raid controller that we've already installed Nexentastor 3 Community Edition on. We setup a raid-10 array that and put a ZFS pool on top of the hardware. As I understand, in this configuration ZFS/Nexentastor will not be able to tell when a disk fails in the array. Obviously, this is not optimal. Since the Dell Perc 5/i controller is a rebranded LSI controller, you should be able to use the MegaCli utility to manage the array and monitor its condition. I had seen in a separate forum that the Perc 5/i is very similar to the LSI MegaRAID 8480E, so I tried installing the MegaCli utility at the link below. However, I have not been able to successfully install the utility. http://www.lsi.com/support/products/Pages/MegaRAIDSAS8480E.aspx Here is what happened when I tried to install MegaCli: root@Nexenta2:/files# pkgadd -d MegaCli.pkg Warning: unable to relocate '$BASEDIR' mv: cannot move `solmegacli-8.02.16/' to a subdirectory of itself, `solmegacli-8.02.16//var/lib/dpkg/alien/solmegacli/reloc/solmegacli-8.02.16' mv: cannot move `solmegacli-8.02.16/' to a subdirectory of itself, `solmegacli-8.02.16//opt/solmegacli-8.02.16' 822-date: warning: This program is deprecated. Please use 'date -R' instead. 822-date: warning: This program is deprecated. Please use 'date -R' instead. solmegacli_8.02.16-1_all.deb generated (Reading database ... 41397 files and directories currently installed.) Preparing to replace solmegacli 8.02.16-1 (using solmegacli_8.02.16-1_all.deb) ... Unpacking replacement solmegacli ... Setting up solmegacli (8.02.16-1) ... In /var/logs/dpkg.log: 2012-03-23 20:40:19 status unpacked solmegacli 8.02.16-1 2012-03-23 20:40:19 configure solmegacli 8.02.16-1 8.02.16-1 2012-03-23 20:40:19 status unpacked solmegacli 8.02.16-1 2012-03-23 20:40:19 status half-configured solmegacli 8.02.16-1 2012-03-23 20:40:19 status installed solmegacli 8.02.16-1 So... I've got three questions: Is it possible to install and use MegaCli in Nexentastor 3? If so, how can I install MegaCli on Nexentastor 3? Suggestions welcome!!! If not, is there a better way to monitor the condition of the Perc 5/i hardware raid? Our 2950 does have a DRAC card, so can I use that to monitor the raid condition?

  Read the article

• Authenticate Teamcity against LDAP using TLS

  - by aseq

  I am running a 6.5 version of Teamcity on a Debian Squeeze server and I use OpenLDAP to authenticate users. I know I can use SSL to be able to use encrypted password authentication, however this has been deprecated by the OpenLDAP developers, see: http://www.openldap.org/faq/data/cache/605.html I would like to know if there is a way to configure LDAP authentication in Teamcity to use TLS on port 389. I can't find anything about it here: http://confluence.jetbrains.net/display/TCD65/LDAP+Integration Or here: http://therightstuff.de/2009/02/02/How-To-Set-Up-Secure-LDAP-Authentication-With-TeamCity.aspx

  Read the article

• Unusual Caching Issue with IE 7/8 and IIS 7

  - by Daniel A. White

  We recently moved a site into production running Server 2008 x64 and IIS 7. The ASP.NET pages apparently load just fine, but when it comes to IE 7 and 8, a weird caching issue has cropped up with the CSS and JavaScript files on the page. On a very sporadic schedule, IE does not get all the files necessary to compose the page (i.e. CSS and JS files). When I manually go to the missing files from the address bar, they come back from local cache as empty. I F5 these source files and magically they come down properly. I refresh the site after loading a few files and the cache seems to hold. This problem has only been reproduced (again, sporadically) on IE 7 and 8 running XP. Chrome and Firefox appear to be immune. We have set IIS to use server-side kernel caching for CSS, JS and images. We also have set to expire content for the App_Themes and Scripts directories to expire immediately. One initial thought it was a SWF loading an FLV on page load. These fixes have not remedied the problem. We had no problems on our staging server which is using Server 2003 and IIS 6. Any ideas would be greatly appreciated. P.S. It sounds similar to this problem: but we do have the Static Content module installed. http://serverfault.com/questions/115099/iis-content-length-0-for-css-javascript-and-images

  Read the article

• Rsyslog mail module not working

  - by Henry-Nicolas Tourneur

  I would like to email snort alerts from my Debian Lenny fw. Syslog is sending log messages from the firewalls to a central rsyslog. On my central rsyslog, I got something like : $ModLoad ommail $ActionMailSMTPServer server.company.local $ActionMailFrom [email protected] $ActionMailTo [email protected] $ActionExecOnlyOnceEveryInterval 1 $template mailSubject,"[SNORT] Alert from %hostname%" $template mailBody,"Snort message\r\nmsg='%msg%'" $ActionMailSubject mailSubject if $msg regexp 'snort[[0-9]]: [[0-9]:[0-9]:[0-9]].*' then ommail:;mailBody But I doesn't get any mails, I even can trigger snort with something like ping -s 1400, it logs things like following but still no mail ! 2010-01-08T09:25:58+00:00 Hostname snort[4429]: [1:499:4] ICMP Large ICMP Packet [Classification: Potentially Bad Traffic] [Priority: 2]: {ICMP} ip_dest - ip_src Any idea ?

  Read the article

• Strange messages on new Dell Workstation during bootup

  - by dan99t

  I recently installed Windows 7 Ultimate on a new Dell T-7500 Workstation, and am seeing some strange messages on the screen: Dell SAS 6 Host Bus Adapter BIOS MPTBIOS 6.22.03.00 ( 2008.08.06 ) Initializing….. Press Ctrl – C to run SAS Configuration Utility Searching for Devices at HBA 0….. Dell MPT Boot ROM Successfully installed Then it loads Windows 7. All of above happens on its own, I don't touch anything. So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems. Also I haven't installed any drivers yet but Sound, Video & Internet does work. Do I need to install any additional drivers?

  Read the article

• Shut Down took way too long because of "Background Programs"

  - by Christopher Chipps

  I tried shutting my desktop PC (with Windows7) down but after several attempts (like 4 or 5) at Start -- Shut Down, the GUI was still there and it was not shutting down. I didn't think there were any programs running when I pressed Shut Down, so I went into the taskbar (Ctrl + Alt + Del) to check out the processes. Once I did that, a screen appeared with a message stating that there are "background programs" still running and it gave me an option to "Force Shut Down" which I pressed and it shut down normally. Does anyone know why this would happen?

  Read the article

• How to change hardcoded database paths in a Lotus Approach Database

  - by asoltys

  One of our Lotus Approach files (file extension .apr) has hardcoded paths to additional underlying database files (file extension .dbf). We've moved the Approach database and all the underlying files to a new network drive, so these paths need to be updated. You can see the old paths by opening the File menu and selecting "Approach File Properties", under the "Databases" heading. How can you change these paths?

  Read the article

• Accessing network shares on Windows7 via SonicWall VPN client

  - by Jack Lloyd

  I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

  Read the article

• Keyboard Shortcuts in Win 7 without the CTRL + ALT

  - by Carlos

  I am knew to this site and don't know if I'm doing this correctly. I've been asked to edit my original post so I deleted my original post and starting over. I don't know why it's so hard for everyone to understand what I'm trying to do. You guys are all geniuses when it comes to computers and I'm just starting out. I started out trying to use a shortcut to display the LOCAL AREA CONNECTION window on my desktop by creating a shortcut and assigning it CTRL + , (comma). Windows didn't like that so it added ALT which ended up being CTRL + ALT + ,. Since I couldn't figure out a way to eliminate ALT as part of the shortkey keys, I am now trying a different strategy and it's not working. my latest attempt is to run the following command; ^,:: Run, explorer:: {BA126ADB-2166-11D1-B1D0-00805FC1270E} Can someone please tell me what I'm doing wrong? I'm trying, just give me a chance. Thanks, Carlos

  Read the article

• Windows 7 Disk Management Spanned Volume vs Striped Volume

  - by Kairan

  Im looking for a reason why a person would use a Spanned volume rather than a Striped volume? If my understanding is correct Striped: Faster read/write speed than spanned, but I "assume" more wear+tear Spanned: No speed benefit like striped, but data is written sequentially and fills up Drive1 before filling up Drive2, so it saves on wear+tear Beyond that Im not sure if there is any other deciding factor on which to use. Definition found below: A striped volume uses the free space on more than one physical hard disk to create a bigger volume. Unlike a spanned volume, a striped volume writes across all volumes in the stripe in small blocks, distributing the load across the disks in the volume. The portions of disk used to create the volume need to be the same size; the size of the smallest free space included in the striped volume will determine.

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas? Edit: I completely forgot I'd asked this question until harrymc posted his answer. I've since found out that to fix this problem, I need to disable my Local Area Connection and re-enable it. Once I do that I have no trouble making network connections until the next time I reboot at which point I repeat the process. It's annoying, but manageable since I reboot very infrequently.

  Read the article

• Limit bandwith on network of computers

  - by Joseph34123

  We have network in office of approximately 10 computers sometimes when someone downloads something for work (e.g. syncing email with an attachment or Dropbox), everyone slows down. I could limit each computer in office but the problem is that we have an open WiFi network, and I cannot access the computers that use it. We have one main DSL router "Netopia 3347" and another router connected to it on wire for public wifi is "Linksys WRT110". I cannot change the setup we have and don't want to. There's 2 approaches here: Set office computers download limit in each computer and then I need to find out how I can set a download limit for the wifi network such as in the router settings. It's a Linksys router and I did not see the option for this, so maybe I need new router for WiFi? Don't bother with each computer and put some "specific hardware" or another computer before router so all traffic goes trough it and I can then assign priority maximum speed for each IP address. Question is what hardware do I need?

  Read the article

• Major Issue with Asus M4A78T-E Bios

  - by user114721

  I am having major issues with my bios and I have tried three different forums in hopes that there is someone out there that can help me.... The issue is that every single time I turn off my computer, when I turn it back on the bios resets and tries to boot from a floppy drive....first problem is I dont have a floppy drive and secondly it does not read my HDD.... I tried everything to fix this...I tried replacing the cmos battery, I tried replacing the sata cable, and I tried a different sata port....none of these things seem to be working. Now the messed up part about all of this is that i am on my computer right now....If I take the battery out and put it back in and setup the bios again manually I am able to get into my computer...but this is NOT normal... Why is my bios resetting constantly when I power down my computer? Please assist me I need my computer for business

  Read the article

• How to connect FortiGate1 SSL VPN remote access from Fedora/CentOS/Ubuntu Linux?

  - by YumYumYum

  How can i connect to FortiGate1 SSL VPN Remote Access router from Fedora/CentOS or Ubuntu/Debian? It only working with Windows Internet explorer for the moment using Vbox (But i cant use Windows only for this) How can i use it from my favourate Linux? # vpnc Enter IPSec gateway address: xx.xx.xx.42 Enter IPSec ID for xx.xx.xx.42: Enter IPSec secret for @xx.xx.xx.42: Enter username for xx.xx.xx.42: Myusername Enter password for [email protected]: vpnc: no response from target

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >