Daily Archives

Articles indexed Thursday October 11 2012

Page 3/15 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• I have two 'WsusContent' folders. One has about 55gb of files in it. How do I clear it out?

  - by MrVimes

  I ran the WSUS cleanup wizard in the WSUS MMC snap-in but this made no difference. I think the files are associated with System Center Essentials because they are in a folder called "data\SCE2007\WsusContent" I've looked for a similar cleanup wizard in System Center Essentials but can't find one. Is there a way to clear these files out that doesn't cause issues for SCE or anything else? FYI I've got both SCE and standalone WSUS settings already set to minimize the amount of updates downloaded from Microsoft to only those that are needed.

  Read the article

• Routing using Linux with 2 NIC cards

  - by Kevin Parker

  Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

  Read the article

• Is null return path reliable indication of a bounce?

  - by Vasiliy Faronov

  I have a mailbox that receives bounces as well as normal email (the latter includes messages from automated services). I want to filter out the bounces and forward them to another mailbox. Assume I cannot change the envelope return path in email I send. Is “null return path” a reliable criterion to tell bounces from normal mail? Roughly how many false positives and false negatives can I expect if I apply it?

  Read the article

• Http header 304 and caching?

  - by Royi Namir

  Our company uses these settings( don't ask me why) - for every request they want a new request from server. this is an intranet system which uses only IE. They defined it in : We also have windows authentication NTLM in the iis7. I have 2 questions please. Question #1) when the browser make a request ( css ) : (leave the 401 response for now - this is how ntlm works) He is requesting it with if-modified-since header. why is he adding this header ? How can I configure it ? why doesn't he use the settings from IE and try to download it each time - as I showed in the first picture ? Question #2) The response ( after ntlm negotiation) for that was : Response with Not-modified which is 304 header. and I assume its because we sent the request with the if-modified-since header. But there is a problem. He is actually tells me to download from my cache. But I told him explicitly in the IE settings - not to load from cache. Wham am I missing here ? Thanks a lot.

  Read the article

• Setting up DNS using VirtualMin/WebMin

  - by Nyxynyx

  I am moving from a cPanel server to one where I've installed VirtualMin. The LAMP stack and the website files have been setup properly and I can access the website by its IP address. Problem: Now its time to point my domain mydomain.com to my new server. After reading many sites describing setting up bind and master zones, I am pretty confused as to what to do, especially coming from a cPanel server where its really simple to set this up. Attempt Tried to register my nameservers ns1.mydomain.com and ns2.mydomain.com at my domain registrar, but I am missing the IPs I need to point these nameservers to. Should I set ns1.mydomain.com to the IP addres of my web server, and not register ns2.mydomain.com? When specifying the DNS for mydomain.com, the first one I've set it to ns1.apadment.com. On the manager/admin page of my webhost provider, I am given the option to create a secondary slave DNS, which I assigned to the IP address of my server. Though I am not sure how the slave DNS will copy the info from my web server? I have assigned this secondary DNS ns.hostprovider.com as the second DNS for mydomain.com I tried creating a Virtual Server under Virtualmin, but it seems to mess up Apache's DocumentRoot for the site by creating and enabling a new vhost file that ends with .conf. I edited the .conf file to point DocumentRoot back to where its supposed to be /var/www/mydomain instead of /user/mydomain.com I believe the next step is to setup the zone. Virtualmin has already created a Master Zone with 8 different addresses (www.mydomain.com, ftp.mydomain.com...). Under Nameservers, there are already 2 records. One is the hostname (random name given by hostprovider, ns12345.ip123-123.net), the other is the secondary slave DNS provided by the host provider. Does having BIND running on my web server makes the server the master DNS? Thank you!

  Read the article

• How can I block access to public server IP for OpenSSH in Debian?

  - by VanDerSpar

  I got a Debian server with a public and a private IP in a DMZ. I need to be able to connect to it through SSH on our private side, and then block all access to the public address. Both /etc/hosts.deny and sshd_config seems to only let one block incoming IP addresses. What I really want is to disable SSH connections for the public IP. I've been trying iptables, but I haven't had luck with that neither. Any help is appreciated.

  Read the article

• Apache certificates for some urls not working

  - by Vegaasen

  We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

  Read the article

• Server 2008 SP1 VSS Writers Not Responding

  - by Jason

  I've got a Windows Server 08 box on SP1 that is having some problems. We've experienced backup problems and I've traced it down to VSS Writers not responding. From the command line, if I type vssadmin list providers, I get Provider name: 'Microsoft Software Shadow Copy provider 1.0' Provider type: System Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5} Version: 1.0.0.7 If I type vssadmin list writers, I get this vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2005 Microsoft Corp. Waiting for responses. These may be delayed if a shadow copy is being prepared. I could wait this out for hours and it won't move. I looked up how Server 2008 handles VSS writers, and you can't reregister them like you could in Server 2003 http://social.technet.microsoft.com/Forums/en/windowsserver2008r2general/thread/062cc52c-899b-45f3-8d0c-798b92363f41 Does anyone know how to fix something like this or where to turn next?

  Read the article

• How cloudfront works?

  - by Dharmik Bhandari

  I'm planning to Implement CDN(Content Delivery Network) of Amazon which is known as CloudFront in ASP.NET MVC3 with c#. I've googled about it but little bit confuse about few things mentions below. Is it compulsory that we have to uploads all static resources to CDN Network first and then we can use or Is it manageable by Amazon to crawl site static resources which is predefine folder or directory of sites? Is Amazon automatic update its copies when we anything change in static resources or every time we have to upload updated resources to CDN network.

  Read the article

• Oracle redo log performance degradation when inserting

  - by Aldarund

  I have a oracle 11g database. I'm testing in for inserts. The database running in noarchive mode. I have 3 redo log configured, each 2gb. I'm trying to insert data into test table. At begin it goes fine with 15k ins/second. I make a commit after 200 inserts. But after about 1.3m inserted records it become really slow, about 1-2k ins/second. As i noticed in resource explorer at this point we have filled all redo logs and so the inserts from this points work slow. So my question is why it become so slow when it fills redo logs, even if i commit each 200 records. And how this situation can be fixed ( except the turning off logging completely at inserts)

  Read the article

• Setting up Amazon Cloudwatch to get an alert when you server is down

  - by Saif Bechan

  I have an instance running on Amazon EC2 that I turned into a webserver. Now I have been looking at cloudwatch, but I do not know if it is the correct tool for the job. Basically I want to get informed when the server is down, for whatever reason. Maybe the server got hacked, or the server shut down for whatever reason, I want to get a notification on that. I have enabled clouwatch, and tried to set up a alert, but I only see things like network in-out or cpu usage, an d metrix. Now I do not know if these will do the trick.

  Read the article

• nginx logrotate config

  - by TomOP

  Whats the best way to rotate nginx logfiles? In my opinion, I should create a file "nginx" in /etc/logrotate.d/ and fill it with the following code and do a /etc/init.d/syslog restart after that. This would be my config (I havn't tested it yet): /usr/local/nginx/logs/*.log { #rotate the logfile(s) daily daily # adds extension like YYYYMMDD instead of simply adding a number dateext # If log file is missing, go on to next one without issuing an error msg missingok # Save logfiles for the last 49 days rotate 49 # Old versions of log files are compressed with gzip compress # Postpone compression of the previous log file to the next rotation cycle delaycompress # Do not rotate the log if it is empty notifempty # create mode owner group create 644 nginx nginx #after logfile is rotated and nginx.pid exists, send the USR1 signal postrotate [ ! -f /usr/local/nginx/logs/nginx.pid ] || kill -USR1 `cat /usr/local/nginx/logs/nginx.pid` endscript } I have both the access.log and error.log files in /usr/local/nginx/logs/ and want to rotate both daily. Can anyone please tell me if "dateext" is correct? I want the log filename to be something like "access.log-2010-12-04". One more thing: Can I do the log rotation every day on a specific time (e.g. 11 pm)? If so, how? Thanks.

  Read the article

• snmpd.conf network range not accepted

  - by Stefan

  I am using snmpd on CentOS 6.3 and was giving a network range to the source for mapping community to security group. com2sec mynetwork 192.168.0.0/23 centreon Anyhow it is not working and I always get a timeout from the polling server. When I enter the exact ip of the polling server it works (192.168.3.180) It even works if I enter the whole netmask (255.255.252.0) Anyhow it should work according to documentation. Did I do anything wrong?

  Read the article

• How to install libcrypt-ssleay-perl in Ubuntu?

  - by Deqing

  When I tried to install libcrypt-ssleay-perl, it says: $ sudo apt-get install libcrypt-ssleay-perl Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libcrypt-ssleay-perl : Depends: perlapi-5.12.4 but it is not installable E: Unable to correct problems, you have held broken packages. This perlapi-5.12.4 is actually a virtual package provided by perl-base, which I had already installed: $ dpkg -l|grep perl-base ii perl-base 5.14.2-6ubuntu2.1 minimal Perl system So what should I do to install libcrypt-ssleay-perl now?

  Read the article

• How to use multiple dns?

  - by Enrichman

  When I connect at work the net is going to assign me a dns that is working fine. After that when I connect to VPN I'm going to receive a different dns. With this one I can reach the server of the vpn owner but I'm not able to go to the internet. BUT if I switch the dns with the old ones I'm able to surf again (still connected to the vpn, but I cannot surf their server). Recap: DNS1) MyPC - CompanyProxy - Internet DNS2) MyPc - CompanyProxy - VPN - NoInternet (can Ping vpn servers) DNS1) MyPC - CompanyProxy - VPN - Internet (cannot ping vpn servers) Weirdest thing: I'm able to do a nslookup from anywhere, but ping is going to fail. Is possible to use both DNS? Or setup a dns just on the browser? I'm quite lost..

  Read the article

• Finding a message in an archive in Kerio MailServer 6

  - by Karl Cassar

  I need to locate some emails from the archive. Kerio is set to archive emails on a daily basis, keeping the last 2 months. From the mail log, I found entries like: [09/Oct/2012 18:02:20] Recv: Queue-ID: 5074589c-00004ddb, Service: SMTP, From: <info@XXXXXXXXXXXX>, To: <Suzette@xxxxxxxxxxx>, Size: 699, Sender-Host: mail.XXXXXXXXXXX, User: automailer@XXXXXXXXXXXXXXX I need to locate this specific email. The archive folder has a lot of ZIP files like: 2012-Oct-06 2012-Oct-07 2012-Oct-08 2012-Oct-09 ... I assumed this would be in the 2012-Oct-09 zip file. I extracted it, and the zip file contains a lot of emails in the /#msgs/ folder, named: 0000000a.eml 0000000b.eml 0000000c.eml ... I did a search for the last part of the Queue-ID, 00004ddb, but it returned no results. I tried other random searches for other emails in the mail log, but I couldn't find a single one. Any idea how one goes about finding such an email in the archive?

  Read the article

• Managing client passwords

  - by HurkNburkS

  I am just starting up a small website development business and one of the issues I am having is remembering passwords and account information for clients hosting, cpanel, ftp accounts etc. I was wondering what is the most suitable system / industry standard for controlling such information? Pretty marginal on the close there... I read the FAQ and I felt list this could be a common issue for webmasters, its defiantly not a coding questions so stackoverflow is out of the question and its not a broad question its focused on one particular aspect of being a webmaster.

  Read the article

• Vim: What do these short names / verbs like <leader>, <C-r> mean?

  - by Ambidex

  I'm using Vim for a while now, starting to like it more and more. But when searching for some new features that Vim has in it's goodie bag, I'm often slapped in the face with things like <Leader> <C-r>, etc... I'm feeling really stupid for not being able to relate these to keys, commands, or what soever they should mean. I've also been searching multiple times for the use of these verbs, but I think I'm not using the correct search queries to get to the right explanation pages. Could someone give me a push in the right direction or maybe summarize the meaning / workings of these verbs? I thank you in advance!

  Read the article

• Is anyone else having issues with opening app links on iOS6 iPad3?

  - by lindon fox

  Links to ios apps (to the app store) are not working for me on my iPad 3/iOS 6. I thought it was my code causing the problem initially, but then I tried it on an iPhone, and an older iPad 2 and they both worked. I looked into it further and it seems no links are working (that I can find). I have googled, but I have not found anything yet. Is there anyone else having this problem? Example: link - this link will work on my computer and phone, but not on my iPad3 running iOS6 - it will just bring up the app store app showing the main screen.

  Read the article

• Why specifying keyboard layout?

  - by amyassin

  Most operating systems (if not all) asks about the keyboard layout during installation. Why do they need to know the layout? I mean, when pressing key, does the keyboard send a specific signal indicating what it represents (if so, why needing to specify the layout?) or it sends a signal indicating its position (the second raw, third key) and then the OS detects what key is that from the layout specified?

  Read the article

• How to start VirtualBox using commandline?

  - by Murat Arpat

  I've VirtualBox on a Windows 7 PC and created a virtual machine for Windows XP. Here is what I want to do: Run VirtualBox Power on guest OS (named "Windows XP") Open Winword in guest OS I want to accomplish these 3 steps at once (by using a batch file for example). Any help would be appreciated. In fact I've a batch file but it does not work as I wanted: "C:\Program Files\Oracle\VirtualBox\Vboxmanage.exe" startvm "Windows XP" TIMEOUT 30 "C:\Program Files\Oracle\VirtualBox\VBoxmanage.exe" guestcontrol "Windows XP" execute --image "C:\PROGRA~1\MICROS~2\OFFICE11\WINWORD.EXE" --username xpuser

  Read the article

• Xen 4.2 on CentOs 6.3 : can't compile a libvirt 0.9.10 xen-activated?

  - by Frederic

  I followed that tutorial for Xen 4.2 on CentOs 6.3. http://www.howtoforge.com/virtualization-with-xen-on-centos-6.3-x86_64-paravirtualization-and-hardware-virtualization When building a new libvirt package with rpmbuild -bb libvirt.spec I get that error : CC libvirt_driver_libxl_la-libxl_conf.lo In file included from libxl/libxl_conf.c:43: libxl/libxl_conf.h:61: error: field 'ctx' has incomplete type libxl/libxl_conf.h:80: error: field 'ctx' has incomplete type libxl/libxl_conf.h:81: error: expected specifier-qualifier-list before 'libxl_waiter' libxl/libxl_conf.c: In function 'libxlMakeDomCreateInfo': libxl/libxl_conf.c:365: warning: implicit declaration of function 'libxl_init_create_info' [-Wimplicit-function-declaration] libxl/libxl_conf.c:365: warning: nested extern declaration of 'libxl_init_create_info' [-Wnested-externs] libxl/libxl_conf.c:367: error: 'libxl_domain_create_info' has no member named 'hvm' libxl/libxl_conf.c:383: warning: implicit declaration of function 'libxl_domain_create_info_destroy' [-Wimplicit-function-declaration] libxl/libxl_conf.c:383: warning: nested extern declaration of 'libxl_domain_create_info_destroy' [-Wnested-externs] libxl/libxl_conf.c: In function 'libxlMakeDomBuildInfo': libxl/libxl_conf.c:406: warning: implicit declaration of function 'libxl_init_build_info' [-Wimplicit-function-declaration] libxl/libxl_conf.c:406: warning: nested extern declaration of 'libxl_init_build_info' [-Wnested-externs] libxl/libxl_conf.c:408: error: 'libxl_domain_build_info' has no member named 'hvm' [...] Do you know what I need to install or change to pass that step?

  Read the article

• Microsoft Mouse and Keyboard Center Needed for Keyboard but Doesn't Support Mouse

  - by eljay

  I recently built a new computer (running Win7 Pro 64-bit) that includes the Microsoft Sidewinder X4 Keyboard. To make use of all the extra features of this keyboard I need the Mouse and Keyboard Center. I just ran Windows Update for the first time on this system and the Mouse and Keyboard Center was included in the update. I'm left-handed and before the update I had the mouse set up for lefty use. Now after the update, it's been set to righty use and the original mouse control panel applet no longer allows the assignment of buttons. For that there's a link to the Mouse and Keyboard Center which does not support my oldish mice. (I have an IntelliMouse Optical and a Creative Mouse Lite Pro.) So I need the new utility for my keyboard, but I have to be right-handed to use my mouse? Really! I tried changing HKCU\Control Panel\Mouse\SwapMouseButtons to 1, but a reboot set it back to 0. Is there some way I can change my mouse back to left-handed? Thanx -eljay

  Read the article

• How to make TimeMachine back up contents of any path or mounted volume

  - by Olfan

  I keep different types of data in different encrypted sparsebundle images (say, one for each client) which automatically mount upon login but can't be opened by anybody other than myself. So, after login I have a number of virtual volumes in /Volumes/ which keeps my client data both secure and organized. How do I include data inside these virtual Volumes in TimeMachine's backups, or data residing in any path on any partition/volume? I found a promising solution description at blog.eurocomp.info involving editing the com.apple.TimeMachine.plist but all I can get TimeMachine to do is backing up the sparsebundle files themselves. I want it to back up the files inside the mounted image, though - something like adding /Volumes/Client_abc/ to TimeMachine's search path. Please do not redirect my to this previous question as it doesn't solve the problem at all. Please also refrain from telling me why you think I should not want this answer as that will not solve anything either. Please lastly don't say "it can't be done" unless you can technically prove that claim.

  Read the article

• Talend : seulement 5 ans et déjà tout d'un grand, le spécialiste français de l'intégration de données affiche une croissance de 100% par an

  Talend : 5 ans et déjà tout d'un grand L'entreprise française d'intégration de données affiche une croissance de 100% par an Il est bien loin le temps où lorsque l'on tapait Talend dans Google, le moteur de recherche renvoyait une proposition de correction orthographique pour « talent ». Pas si loin que cela, en fait. Car si l'entreprise française spécialisée dans les outils open-sources d'intégration de données n'est plus stricto-sensu une « start-up », elle est encore très jeune. De passage à Paris, le PDG de Talend ? Bertrand Diard ? le rappelait lors de son intervention au Talend Connect. « Quand on présente nos résultats, on nous dit souvent &q...

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >