Search Results

Search found 134 results on 6 pages for 'tj ellis'.

Page 1/6 | 1 2 3 4 5 6  | Next Page >

• Disabling Laptop (PB TJ-75) faulty card reader Linux

  - by Gab

  My problem comes from that my laptop [PB TJ-75] has a faulty Alcor card reader. It’s 100% sure, the device is dead and unusable whatever the OS is. It cannot be disabled in BIOS [latest: Vendor: Phoenix Technologies LTD Version: V1.26 Release Date: 05/04/2010]. If I could take it apart from the main board easily, and if with that, the system would never look again for it, I’ll be very happy! Is it possible, has anyone ever tried this? Or maybe, replacing the BIOS with a more open one, which let you disable the card reader. Does this exists? Here's what I've tried to disable it so far. In Win7, I choose ‘disable’ in device manager and that’s ok. If not, the device keeps on appearing and disappearing and lot of resources are used. In Lubuntu 13.04, I got extra boot time, with the msg:'sdb, assuming drive cache, etc.’ I tried other distros (isos booted by grub). I can boot Puppy, Gparted, and Redobackup apparently without any problem. I cannot boot Debian, live or install + tried Crunchbang and Tails. I got a loop :’usb device, scsi n+1 blabla‘. I tried "nousb", no result, I have blacklisted EHCI, no result, then usb_storage module, better boot time in Lubuntu, with just the message "...data transfer failed", better shutdown time too. But, no way to use usb storage medias. In Debian, it ends with BusyBox prompt. Is it possible to just disable that Alcor card reader? Does it have a specific module? Is there a special kernel boot option that I missed? Does it have something to do with kernel recompiling, and if yes, how to do with isos? Programming a driver which says everything is ok (out of my comprehension for the moment)? Disabling device by vendor id? What is the best way?

  Read the article

• In listview,Viewstub cannot be found after the previous one is inflate

  - by user2958132

  I am using some list item layout and in the item layout, there is a Viewstub where I want to put some image in.I don't have the source of list item layout and just know there are some TextViews and ViewStubs in it. My purpose is to find the ViewStub first and set my personal layout and play with it. However, some of the ViewStub cannot be found. public class TJAdapter extends CursorAdapter { .... public void bindView(View view, Context context, Cursor cursor) { ViewStub contentstub = (ViewStub)item.findViewById(R.id.content_stub); if (contentstub == null){ LOG.error("TJ,contentstub is null"); } else { LOG.error("TJ,contentstub is not null"); contentstub.setLayoutResource(R.layout.icon_image); View iconImage = contentstub.inflate(); } .... } public View newView(Context context, Cursor cursor, ViewGroup parent) { final View view = mInflater.inflate(R.layout.list_item, parent, false); bindView(view, context, cursor); } And the log output is like this: TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is null TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is null TJ,bindView is called TJ,contentstub is not null I spent a lot of time on it and have no idea why this happens. Can some body help?

  Read the article

• Some optimization about the code (computing ranks of a vector)?

  - by user1748356

  The following code is a function (performance-critical) to compute tied ranks of a vector: mergeSort(x,inds,ci); //a sort function to sort vector x of length ci, also returns keys (inds) of x. int tj=0; double xi=x[0]; for (int j = 1; j < ci; ++j) { if (x[j] > xi) { double rankvalue = 0.5 * (j - 1 + tj); for (int k = tj; k < j; ++k) { ranks[inds[k]]=rankvalue; }; tj = j; xi = x[j]; }; }; double rankvalue = 0.5 * (ci - 1 + tj); for (int k = tj; k < ci; ++k) { ranks[inds[k]]=rankvalue; }; The problem is, the supposed performance bottleneck mergeSort(), which is O(NlogN) is several times faster than the other part of codes (which is O(N)), which suggests there is room for huge improvment with the other part of the codes, any advices?

  Read the article

• 9o9 98 6y jetj ety jetjte j [closed]

  - by mandnd

  8oo o o9o tj jy jey

  Read the article

• Regex query: how can I search PDFs for a phrase where words in that phrase appear on more than one l

  - by Alison

  I am trying to set up an index page for the weekly magazine I work on. It is to show readers the names of companies mentioned in that weeks' issue, plus the page numbers they are appear on. I want to search all the PDF files for the week, where one PDF = one magazine page (originally made in Adobe InDesign CS3 and Adobe InCopy CS3). I have set up a list of companies I want to search for and, using PowerGREP and using delimited regular expressions, I am able to find most page numbers where a company is mentioned. However, where a company name contains two or more words, the search I am running will not pick up instances where the name appears over more than one line. For example, when looking for "CB Richard Ellis" and "Cushman & Wakefield", I got no result when the text appeared like this: DTZ beat BNP PRE, CB [line break here] Richard Ellis and Cushman & [line break here] Wakefield to secure the contract. [line end here] Could someone advise me on how to write a regular expression that will ignore white space between words and ignore line endings OR one that will look for the words including all types of white space (ie uneven spaces between words; spaces at the end of lines or line endings; and tabs (I am guessing that this info is imbedded somehow in PDF files). Here is a sample of the set of terms I have asked PowerGREP to search for: \bCB Richard Ellis\b \bCB Richard Ellis Hotels\b \bCentaur Services\b \bChapman Herbert\b \bCharities Property Fund\b \bChetwoods Architects\b \bChurch Commissioners\b \bClive Emson\b \bClothworkers’ Company\b \bColliers CRE\b \bCombined English Stores Group\b \bCommercial Estates Group\b \bConnells\b \bCooke & Powell\b \bCordea Savills\b \bCrown Estate\b \bCushman & Wakefield\b \bCWM Retail Property Advisors\b [Note that there is a delimited hard return between each \b at the end of each phrase and beginnong of the next phrase.] By the way, I am a production journalist and not usually involved in finding IT-type solutions and am finding it difficult to get to grips with the technical language on the PowerGREP site. Thanks for assistance Alison

  Read the article

• How to keep menu in a single place without using frames

  - by TJ Ellis

  This is probably a duplicate, but I can't find the answer anywhere (maybe I'm searching for the wrong thing?) and so I'm going to go ahead and ask. What is the accepted standard practice for creating a menu that is stored in a single file, but is included on every page across a site? Back in the day, one used frames, but this seems to be taboo now. I can get things layed out just the way I want, but copy/pasting across every page is a pain. I have seen php-based solutions, but my cheap-o free hosting doesn't support php (which is admittedly a pain, but it's a fairly simple webpage...). Any ideas for doing this that does not require server-side scripting?

  Read the article

• Page output caching for dynamic web applications

  - by Mike Ellis

  I am currently working on a web application where the user steps (forward or back) through a series of pages with "Next" and "Previous" buttons, entering data until they reach a page with the "Finish" button. Until finished, all data is stored in Session state, then sent to the mainframe database via web services at the end of the process. Some of the pages display data from previous pages in order to collect additional information. These pages can never be cached because they are different for every user. For pages that don't display this dynamic data, they can be cached, but only the first time they load. After that, the data that was previously entered needs to be displayed. This requires Page_Load to fire, which means the page can't be cached at that point. A couple of weeks ago, I knew almost nothing about implementing page caching. Now I still don't know much, but I know a little bit, and here is the solution that I developed with the help of others on my team and a lot of reading and trial-and-error. We have a base page class defined from which all pages inherit. In this class I have defined a method that sets the caching settings programmatically. For pages that can be cached, they call this base page method in their Page_Load event within a if(!IsPostBack) block, which ensures that only the page itself gets cached, not the data on the page. if(!IsPostBack) {     ...     SetCacheSettings();     ... } protected void SetCacheSettings() {     Response.Cache.AddValidationCallback(new HttpCacheValidateHandler(Validate), null);     Response.Cache.SetExpires(DateTime.Now.AddHours(1));     Response.Cache.SetSlidingExpiration(true);     Response.Cache.SetValidUntilExpires(true);     Response.Cache.SetCacheability(HttpCacheability.ServerAndNoCache); } The AddValidationCallback sets up an HttpCacheValidateHandler method called Validate which runs logic when a cached page is requested. The Validate method signature is standard for this method type. public static void Validate(HttpContext context, Object data, ref HttpValidationStatus status) {     string visited = context.Request.QueryString["v"];     if (visited != null && "1".Equals(visited))     {         status = HttpValidationStatus.IgnoreThisRequest; //force a page load     }     else     {         status = HttpValidationStatus.Valid; //load from cache     } } I am using the HttpValidationStatus values IgnoreThisRequest or Valid which forces the Page_Load event method to run or allows the page to load from cache, respectively. Which one is set depends on the value in the querystring. The value in the querystring is set up on each page in the "Next" and "Previous" button click event methods based on whether the page that the button click is taking the user to has any data on it or not. bool hasData = HasPageBeenVisited(url); if (hasData) {     url += VISITED; } Response.Redirect(url); The HasPageBeenVisited method determines whether the destination page has any data on it by checking one of its required data fields. (I won't include it here because it is very system-dependent.) VISITED is a string constant containing "?v=1" and gets appended to the url if the destination page has been visited. The reason this logic is within the "Next" and "Previous" button click event methods is because 1) the Validate method is static which doesn't allow it to access non-static data such as the data fields for a particular page, and 2) at the time at which the Validate method runs, either the data has not yet been deserialized from Session state or is not available (different AppDomain?) because anytime I accessed the Session state information from the Validate method, it was always empty.

  Read the article

• What is wrong with my Dot Product?

  - by Clay Ellis Murray

  I am trying to make a pong game but I wanted to use dot products to do the collisions with the paddles, however whenever I make a dot product objects it never changes much from .9 this is my code to make vectors vector = { make:function(object){ return [object.x + object.width/2,object.y + object.height/2] }, normalize:function(v){ var length = Math.sqrt(v[0] * v[0] + v[1] * v[1]) v[0] = v[0]/length v[1] = v[1]/length return v }, dot:function(v1,v2){ return v1[0] * v2[0] + v1[1] * v2[1] } } and this is where I am calculating the dot in my code vector1 = vector.normalize(vector.make(ball)) vector2 = vector.normalize(vector.make(object)) dot = vector.dot(vector1,vector2) Here is a JsFiddle of my code currently the paddles don't move. Any help would be greatly appreciated

  Read the article

• What is wrong with my Dot Product? [Javascript]

  - by Clay Ellis Murray

  I am trying to make a pong game but I wanted to use dot products to do the collisions with the paddles, however whenever I make a dot product objects it never changes much from .9 this is my code to make vectors vector = { make:function(object){ return [object.x + object.width/2,object.y + object.height/2] }, normalize:function(v){ var length = Math.sqrt(v[0] * v[0] + v[1] * v[1]) v[0] = v[0]/length v[1] = v[1]/length return v }, dot:function(v1,v2){ return v1[0] * v2[0] + v1[1] * v2[1] } } and this is where I am calculating the dot in my code vector1 = vector.normalize(vector.make(ball)) vector2 = vector.normalize(vector.make(object)) dot = vector.dot(vector1,vector2) Here is a JsFiddle of my code currently the paddles don't move. Any help would be greatly appreciated

  Read the article

• Only MKV format available in HandBrake

  - by Steve Ellis

  I am running Ubuntu 14.04 LTS 32 bit. I have installed HandBrake rev5474 (i686), which I believe is the latest, and the Ubuntu Restricted Extras. I am able to play DVDs via VLC but when it comes to ripping them, so that I can back them up to my Twonky media server, I have issues. I launch HandBrake and find that the only format available for me to select is MKV. When I used to run Handbrake on this machine while I was running Ubuntu 13.10 and lower I had no issues and **lots of formats (including MP4 which is what I'm really after) but since reformating and installing 14.04 I've had this issue. Any help would be much appreciated.

  Read the article

• ubuntu 13.04 - wireless settings help

  - by James Ellis

  Im having problems connecting my wifi in Ubuntu 13.04 So i was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe i put in the wrong data or maybe not enough Would that make it work?? I just dont know how to find out some of the data you need to put in or if im putting the wrong stuff in??? Im new and its confusing. does anyone know the solution?

  Read the article

• Moodle 2 pages loading up to 2000% faster

  - by TJ

  On average our Moodle 2 pages were loading in 2.8 seconds, now they load in as little as 0.12 seconds, so that’s like 2333.333% faster!What was it I hear you say?Well it was the database connection, or more correctly the database library. I was using FreeTDS http://docs.moodle.org/22/en/Installing_MSSQL_for_PHP, but now I’m using the new Microsoft Drivers 3.0 for PHP for SQL Server http://www.microsoft.com/en-us/download/details.aspx?id=20098. I’m in a Windows Server IT department, and in both our live and development environments, we have Moodle 2.2.3, IIS 7.5, and PHP 5.3.10 running on two Windows Server 2008 R2 servers and using MS Network Load Balancing.Since moving to Moodle 2, the pages have always loaded much more slowly than they did in Moodle 1.9, I’ve been chasing this issue for quite a while. I had previously tried the Microsoft Drivers for PHP for SQL Server 2.0, but my testing showed it was slower than the FreeTDS driver.Then yesterday I found Microsoft had released the new version, Microsoft Drivers 3.0 for PHP for SQL Server, so I thought I’d give it a run, and wow what a difference it made.Pages that were loading in 2.8 seconds, now they load in as little as 0.12 seconds, 2333.333% faster…I have more testing to do, but so far it’s looking good, I have scheduled multi user load testing for early next week (fingers crossed).To make the change all I need to do was,download the driverscopy the relevant files to PHP\ext (for us they were php_pdo_sqlsrv_53_nts.dll and php_sqlsrv_53_nts.dll) install the Microsoft SQL Server 2012 Native Client x64 http://www.microsoft.com/en-us/download/details.aspx?id=29065 add to PHP.ini, extension=php_pdo_sqlsrv_53_nts.dll, extension=php_sqlsrv_53_nts.dllremove form PHP.ini, extension=php_dblib.dllvchange in PHP.ini, mssql.textlimit = 20971520 and mssql.textsize = 20971520change Moodle config.php, $CFG->dbtype = 'sqlsrv'; and 'dbpersist' => Trueand then reboot and test…I've browsed courses, backed up/restored some really large and complicated courses, deleted courses etc. etc. all good.Still more testing to do but, hey this is good start...Hope this helps anyone experiencing the same slowness…

  Read the article

• Only MPV format available in HandBrake

  - by Steve Ellis

  I am running Ubuntu 14.04 LTS 32 bit. I have installed HandBrake rev5474 (i686), which I believe is the latest, and the Ubuntu Restricted Extras. I am able to play DVDs via VLC but when it comes to ripping them, so that I can back them up to my Twonky media server, I have issues. I launch HandBrake and find that the only format available for me to select is MPV. When I used to run Handbrake on this machine while I was running Ubuntu 13.10 and lower I had no issues and **lots of formats (including MP4 which is what I'm really after) but since reformating and installing 14.04 I've had this issue. Any help would be much appreciated.

  Read the article

• Cant get internet connection at all on Ubuntu 13.04

  - by James Ellis

  I installed Ubuntu 13.04 alongside my Windows Vista, at the start of installation it doesn't connect to the internet to download updates during installation, also during installation towards the end it removes a lot of stuff that i couldn't catch the details of at the time, it won't find my internet connection even though windows does, i tried using the ethernet cable but it wouldn't pick that up either. So i clicked in Ubuntu... System, network-Browse Internet, then Windows Internet and it said "failed to retrieve share list from server:no such file or directory" how can i get Ubuntu to find my internet???

  Read the article

• How to I access "Deny" message from a Lidgren client?

  - by TJ Mott

  I'm using the Lidgren v3 network for a UDP client/server networking model. On the server end, I'm initializing a NetServer object with the NetIncomingMessage.ConnectionApproval message type enabled. So the client is able to successfully connect and the first packet it sends is a login packet, containing a username and password supplied by the user. The server is receiving that and doing some black magic to authenticate, and everything works up to that point. If the login fails, the server calling NetIncomingMessage.SenderConnection.Deny("Invalid Login Credentials"). I want to know how to properly receive this deny message on the client. I'm getting the message, it shows up with a message type of NetIncomingMessage.StatusChanged. If I call ReadString on that message, I get a corrupted version of the string I passed to the Deny method on the server. The type of corruption varies, I've seen odd characters in there but in every case it's truncated and is way shorter than the string I entered. Any ideas? The official documentation is sparse on this topic. I could use pointers from anyone who has successfully used the Lidgren library and uses the Accept or Deny methods. Also, if I don't do any authentication and just Approve() the connection every time, stuff actually works just fine and I'm getting reliable two-way UDP traffic. (And lastly, Stack Exchange said I don't have enough reputation to use the "Lidgren" tag....???)

  Read the article

• MVC & Windows Authentication

  - by TJ

  Changed the ValidateUser function  public bool ValidateUser(string userName, string password)         {             bool validation;             try             {                 LdapConnection ldc = new LdapConnection(new LdapDirectoryIdentifier((string)null, false, false));                 NetworkCredential nc = new NetworkCredential(userName, password, "domainname.com");                 ldc.Credential = nc;                 ldc.AuthType = AuthType.Negotiate;                 ldc.Bind(nc); // user has authenticated at this point, as the credentials were used to login to the dc.                  string myvar = ldc.SessionOptions.DomainName;                 validation = true;             }             catch (LdapException)             {                 validation = false;             }             return validation;         }

  Read the article

• Using JQuery to open a popup window and print

  - by TJ Kirchner

  Hello, A while back I created a lightbox plugin using jQuery that would load a url specified in a link into a lightbox. The code is really simple: $('.readmore').each(function(i){ $(this).popup(); }); and the link would look like this: <a class='readmore' href='view-details.php?Id=11'>TJ Kirchner</a> The plugin could also accept arguments for width, height, a different url, and more data to pass through. The problem I'm facing right now is printing the lightbox. I set it up so that the lightbox has a print button at the top of the box. That link would open up a new window and print that window. This is all being controlled by the lightbox plugin. Here's what that code looks like: $('.printBtn').bind('click',function() { var url = options.url + ( ( options.url.indexOf('?') < 0 && options.data != "" ) ? '?' : '&' ) + options.data; var thePopup = window.open( url, "Member Listing", "menubar=0,location=0,height=700,width=700" ); thePopup.print(); }); The problem is the script doesn't seem to be waiting until the window loads. It wants to print the moment the window appears. As a result, if I click "cancel" to the print dialog box, it'll popup again and again until the window loads. The first time I tried printing I got a blank page. That might be because the window didn't finish load. I need to find a way to alter the previous code block to wait until the window loads and then print. I feel like there should be an easy way to do this, but I haven't found it yet. Either that, or I need to find a better way to open a popup window and print from the lightbox script in the parent window, without alternating the webpage code in the popup window.

  Read the article

• Increase RGB components every Hour (r), Minute (g), Second (b) for digital clock

  - by TJ Fertterer

  So I am taking my first javascript class (total noob) and one of the assignments is to modify a digital clock by assigning the color red to hours, green minutes, blue to seconds, then increase the respective color component when it changes. I have successfully assigned a decimal color value (ex. "#850000" to each element (hours, minutes, seconds), but my brain is fried trying to figure out how to increase the brightness when hours, minutes, seconds change, i.e. red goes up to "#870000" changing from 1:00:00 pm to 2:00:00 pm. I've searched everywhere with no help on how to successfully do this. Here is what I have so far and any help on this would be greatly appreciated. TJ <script type="text/javascript"> <!-- function updateClock() { var currentTime = new Date(); var currentHours = currentTime.getHours(); var currentMinutes = currentTime.getMinutes(); var currentSeconds = currentTime.getSeconds(); // Pad the minutes with leading zeros, if required currentMinutes = ( currentMinutes < 10 ? "0" : "" ) + currentMinutes; // Pad the seconds with leading zeros, if required currentSeconds = ( currentSeconds < 10 ? "0" : "" ) + currentSeconds; // Choose either "AM" or "PM" as appropriate var timeOfDay = ( currentHours < 12 ) ? "AM" : "PM"; // Convert the hours component to 12-hour format currentHours = ( currentHours > 12 ) ? currentHours - 12 : currentHours; // Convert an hours component if "0" to "12" currentHours = ( currentHours == 0 ) ? 12 : currentHours; // Get hold of the html elements by their ids var hoursElement = document.getElementById("hours"); document.getElementById("hours").style.color = "#850000"; var minutesElement = document.getElementById("minutes"); document.getElementById("minutes").style.color = "#008500"; var secondsElement = document.getElementById("seconds"); document.getElementById("seconds").style.color = "#000085"; var am_pmElement = document.getElementById("am_pm"); // Put the clock sections text into the elements' innerHTML hoursElement.innerHTML = currentHours; minutesElement.innerHTML = currentMinutes; secondsElement.innerHTML = currentSeconds; am_pmElement.innerHTML = timeOfDay; } // --> </script> </head> <body onload="updateClock(); setInterval( 'updateClock()', 1000 )"> <h1 align="center">The JavaScript digital clock</h1> <h2 align="center">Thomas Fertterer - Lab 2</h2> <div id='clock' style="text-align: center"> <span id="hours"></span>: <span id='minutes'></span>: <span id='seconds'></span> <span id='am_pm'></span> </div> </body> </html>

  Read the article

• Firefox Using Prism Website Icon instead of Firefox Icon in Taskbar

  - by Yaakov Ellis

  A while back, I created a website shortcut using the now discontinued Prism extension for Firefox. This worked fine at the time. However, now that Prism has been discontinued, whenever I open Firefox, when the shortcut for FF shows up my Windows taskbar, it does so with the website favico for the old Prism shortcut site that I created. If I right-click on the taskbar shortcut, it shows the old shortcut to the Prism app (even though I deleted its entry manually from C:\Users\USERNAME\AppData\Roaming\WebApps). If I then click on [Pin to Taskbar] and then right click and [Unpin from Taskbar], the icon will switch back to the FF icon. If I righ-click on it a third time, it will switch back to the Prism site favico. I assume that if I were able to install Prism, then it would give me some way to remove the site. However, since Prism is discontinued and incompatible with the current version of FF, that is not an option. What I would like to do: completely remove references to the Prism app from my computer: Disassociate the prism website Favico from Firefox, so that it never replaces the FF icon in the Windows taskbar Shortcut to the Prism site will never shot up in the right-click menu for FF

  Read the article

• 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

  - by T.J. Crowder

  (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• How easy is it to migrate a Linux VM image from one VM env to another?

  - by T.J. Crowder

  If I stick to one of the standard, well-supported VM disk images (like a raw image, or VDI, VMDK, ...), are Linux VMs typically easy to move between VM environments? E.g., between (say) VirtualBox and KVM, or VMWare and Xen? I'm talking here of fully virtualized environments, not paravirtualization requiring support within the guest OS. It seems to me that the kernels in most Linux distributions these days are configured to...keep an open mind and detect things at boot time, so you don't have the issue that you sometimes have moving a Windows VM from one virtualization system to another (I'm thinking particularly of HAL issues that Windows has, like ACPI vs. non-ACPI; I've also just had Windows VMs generally acting strangely when moved from VMWare to VirtualBox, for instance). I'm looking for a general answer, but if it helps, specifically I'm mostly going to be doing this with Ubuntu 8.04 LTS and 10.04 LTS guests. But that could change.

  Read the article

• Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

  - by T.J. Crowder

  Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

  Read the article

• Intel D510MO board - 1000Mbit LAN or not?

  - by T.J. Crowder

  The Intel forum seems to be down (signing in fails with connection refused), but perhaps someone here knows the answer. The Intel D510MO product page says that the LAN is 10/100/1000, but when I look at the NM10 chipset it uses, it says it's just 10/100 (and the detailed PDF spec here backs that up pretty definitively). I don't immediately see anything saying the D510MO has a different LAN controller than the NM10's onboard one, and it would seem odd if it did given the purpose of the board (low power, small footprint; integrated). Does this board support 1000Mbit LAN or not? Anyone have direct knowledge of it? Thanks in advance.

  Read the article

1 2 3 4 5 6  | Next Page >