Daily Archives

Articles indexed Sunday November 18 2012

Page 11/14 | < Previous Page | 7 8 9 10 11 12 13 14  | Next Page >

  • Connecting debian and windows via IPsec VPN with Racoon and ipsec-tools

    - by Michi Qne
    I've some trouble with the IPsec configuration on my debian server (6 squeeze). This server should connect via IPsec VPN to an windows server, which is protected by an firewall. I've used racoon and ipsec-tools and this tutorial http://wiki.debian.org/IPsec. However, I am not quite sure, if this tutorial fits to my purpose, because of some differences: my Host and my gateway are the same server. So I don't have two different ip addresses. I guess, that's not a problem the other server is an windows system behind a firewall. Hopefully, not a problem the subnet of the windows system is /32 not /24. So I change it to /32. I worked through the tutorial step by step, but I wasn't able to route the ip. The following command didn't work for me: ip route add to 172.16.128.100/32 via XXX.XXX.XXX.XXX src XXX.XXX.XXX.XXX So I tried the following instead: ip route add to 172.16.128.100 .., which obviously not solved the problem. The next problem is the compression. The windows doesn't use a compression, but 'compression_algorithm none;' doesn't work with my racoon. So the current value is 'compression_algorithm deflate;' So my current result looks like this: When I am trying to ping the windows host (ping 172.16.128.100), I receive the following error message from ping: ping: sendmsg: Operation not permitted And racoon logs: racoon: ERROR: failed to get sainfo. After googling for a while I came to no conclusion, what's the solution. Does this error message mean that the first phase of IPsec works? I am thankful for any advice. I guess my configs might be helpful. My racoon.conf looks like this: path pre_shared_key "/etc/racoon/psk.txt"; remote YYY.YYY.YYY.YYY { exchange_mode main; proposal { lifetime time 8 hour; encryption_algorithm 3des; hash_algorithm sha1; authentication_method pre_shared_key; dh_group 2; } } sainfo address XXX.XXX.XXX.XXX/32 any address 172.16.128.100/32 any { pfs_group 2; lifetime time 8 hour; encryption_algorithm aes 256; authentication_algorithm hmac_sha1; compression_algorithm deflate; } And my ipsec-tools.conf looks like this: flush; spdflush; spdadd XXX.XXX.XXX.XXX/32 172.16.128.100/32 any -P out ipsec esp/tunnel/XXX.XXX.XXX.XXX-YYY.YYY.YYY.YYY/require; spdadd 172.16.128.100/32 XXX.XXX.XXX.XXX/32 any -P in ipsec esp/tunnel/YYY.YYY.YYY.YYY-XXX.XXX.XXX.XXX/require; If anyone has an advice, that would be awesome. Thanks in Advance. Greets, Michael It was a simple copy-and-paste error in an ip address.

    Read the article

  • Server 2008 Active directory file sharing Restriction

    - by Usman
    My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

    Read the article

  • Problem with php and apache

    - by user47587
    I am having trouble using the php module with apache2. At the moment, testing with a phpinfo script, only php code is displayed as though it were text, no output at all. I have the line LoadModule php5_module libphp5.so, with an absolute path. Yet, when I do apache2 -t -D DUMP_MODULES |grep php, nothing is reported I have my error level set to warn, and the last entry in my logfile after apache starts is [notice] Apache/2.2.15 (Unix) PHP/5.2.12 mod_ssl/2.2.15 OpenSSL/0.9.8g configured -- resuming normal operations Which implies there is php support?

    Read the article

  • Rack layout tools

    - by Luke
    I'm wondering if there's any tools (preferably offline) that would allow me to layout all of the new equipment that will be going into several standard racks. Currently I'm using Excel to map out all of the slots columns for the data but I suspect that there is some better method of doing this. Suggestions? Edit: Dell has an online tool, but doesn't seem very good at actually saving the data that you're working on (and obviously it's geared towards Dell hardware).

    Read the article

  • How is it possible that Winrar can repair any volume with one .rev file?

    - by Coldblackice
    I just learned about .rev files with Winrar -- that if you have a 10-part RAR volume, for example, plus one .rev (recovery) volume -- that .rev volume will be able to "fix" any -one- corrupted volume. How is it able to do this? Obviously there's something I'm not understanding, as I don't understand how one volume could have the "data" to fix any/all of the individual broken volumes. I'd guess that it's because the volumes aren't broken up like I tend to imagine -- each volume having individual files of the whole packed into them, but rather, it's viewed as one continuous "file", so to speak, of data. And that there must be some type of CRC'ish repair work -- But I just don't understand how you could have 9 working volumes, with 1 damaged, but a recovery volume that would be able to repair -any- one of those volumes. How is it able to hold "all" of the data in just one recovery file?

    Read the article

  • homegroup administrator user no longer exists

    - by Beninja
    I had a PC with windows 7 that was the homegroup administrator for my network. I recently upgraded to windows 8 I went to homegroup in control panel and saw that the original homegroup was never removed. It says to talk to the administrator on and obtain the password to join the homegroup. I need to create a new homegroup but I cant unless I somehow remove the old one. And I cant do that because the user that had rights to the old one no longer exists. Please help!! Ben

    Read the article

  • How I disable "Safely remove hardware" in Windows 8?

    - by DarkGhostHunter
    I have a Marvell 91XX and I just updated to Windows 8. The problem I have with the latest drivers 1.0.2.1027 is the absence of "Policies" tab inside the Properties in the Device Manager, where I could disable de "Safely Remove Hardware". It was in Windows 7, but in the new version is not, so the OS shows my two hard disks has removable hardware and I can't do anything about it. Is gone forever? Is in another part? Or is not supported? PD: The best I can come up for a fix is to roll back to Windows 7, see if the option changes some regedit value, export, update to Windows 8 and import.

    Read the article

  • dhclient configures /etc/resolv.conf with invalid entry

    - by kubal5003
    I'm trying to figure out why running dhclient on my interface sets /etc/resolv conf to the ip number of my gateway(router). This entry is invalid and each and every time causes inability to resolve any address. I would like to: stop dhclient from overwriting the /etc/resolv.conf or make dhclient write there the valid dns ip from my router More on the environment: I'm using virtual Debian Wheezy as a client system on Windows Seven x64. It is run by Virtualbox with networking mode set to bridged (all packets from debian are injected to my network interface on windows). If I manually configure the /etc/resolv.conf then everything works fine. Doing this on every boot is quite annoying.. PS I know I can write a script to do it for me, but this is not the solution I want. //edit router ip: 192.168.1.100 /etc/resolv.conf AFTER running dhclient eth0: "nameserver 192.168.1.100" what I would like the /etc/resolv.conf to look like: "nameserver 89.202.xxxx" (I don't have to provide the real ip do I? )

    Read the article

  • Dell XPS M1330 - power cable pulled by accident and now it won't turn on

    - by jim
    I have a similar problem to what has been posted on this site about when I plug in my Laptop adapter the green light comes on as expected; but, when I plug it into the laptop it goes out. In my case, I know it's not the adapter because I have 2 and they both experience the same issue. I'm quite certain the problem is a short in the laptop. I was using the laptop today and the power cord was pulled out by accident and now i'm into this predicament. How or what do I check on the laptop to isolate the problem? Thanks!

    Read the article

  • Windows Media Player won't open

    - by Haein
    When I tried to play a DVD on my laptop, I tried to open WMP but it didn't open. I did leave the DVD in my laptop for a fortnight but when I played it a week ago it was fine and my DVD drive is reading the DVD so I think that's ok. I tried to make sure WMP is up to date and it was working fine until a few days ago. I can't think of any triggers for this and when I tried to uninstall it that didn't work either as I couldn't even find it in the programs list. I then tried to install a different media player (GOM) but that didn't play my DVD either although it did play music fine. I am really concerned - should I just get a new laptop? Or is it worth getting it fixed?

    Read the article

  • Gmail undo yellow notification area disappears too rapidly on Chrome

    - by stephf0716
    I'm having trouble with the Gmail yellow notification area disappearing too quickly in Google Chrome. For reference, I am talking about the notification that appears at the top of Gmail after archiving or deleting a message from a web browser. I tried it on IE9 and it works fine. I have also cleared the cache and cookies on Chrome and the issue persists. Has anybody run into this on Chrome and know of a solution?

    Read the article

  • Can't install Hyper-V in Windows 8 Pro. Causes boot loop, pain & suffering

    - by Nick
    Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated.

    Read the article

  • How do I fix a corrupt calendar cache?

    - by Blacklight Shining
    I was tailing /var/log/system.log and noticed a sudden wall of text. Looking closer, I saw it was an error CalendarAgent got while trying to save something: Nov 18 11:42:45 rainbow-dash.local CalendarAgent[12321]: CoreData: error: (11) Fatal error. The database at /Users/blackl/Library/Calendars/Calendar Cache is corrupted. SQLite error code:11, 'database disk image is malformed' Nov 18 11:42:45 rainbow-dash.local CalendarAgent[12321]: Core Data: annotation: -executeRequest: encountered exception = Fatal error. The database at /Users/blackl/Library/Calendars/Calendar Cache is corrupted. SQLite error code:11, 'database disk image is malformed' with userInfo = { NSFilePath = "/Users/blackl/Library/Calendars/Calendar Cache"; NSSQLiteErrorDomain = 11; } 2 messages repeated several times Nov 18 11:42:49 rainbow-dash.local CalendarAgent[12321]: [com.apple.calendar.store.log.subscription] [WARNING: CalSubscriptionSession :: persistError :: save failed] This entire sequence is repeated many times throughout the log. file said the file in question was a SQLite 3.x database, so I did a bit of searching and came up with a way to check those. blackl% cp -i ~/Library/Calendars/Calendar\ Cache /tmp blackl% sqlite3 /tmp/Calendar\ Cache SQLite version 3.7.12 2012-04-03 19:43:07 Enter ".help" for instructions Enter SQL statements terminated with a ";" sqlite> pragma integrity_check ; *** in database main *** Main freelist: Bad ptr map entry key=863 expected=(2,0) got=(5,21) On page 21 at right child: 2nd reference to page 863 This is followed by a few dozen lines like these: rowid <number> missing from index <name> and then: wrong # of entries in index <name> I'm at a bit of a loss as to what to do now—I couldn't find anything on how to fix the errors that I found. Also, it would probably be a good idea to disable Calendar Agent so it doesn't try to use the database while it's being fixed (that's why I copied it to /tmp before running sqlite3 on it.) How do I disable CalendarAgent and fix its cache?

    Read the article

  • Will I have internet connection issues next day, if I unplug router at night?

    - by headskracher77
    I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

    Read the article

  • Chipset fan on the frtiz - compressed air hasn't fixed anything - is there anything I can do?

    - by Anthony
    Yesterday, my computer started to make an annoying whining noise. Knowing that this is likely a fan issue, I opened the case and proceeded to determine which fan was causing the issue. I got some compressed air and tried cleaning out the dust around it (and the rest of the computer while I was at it). This hasn't seemed to fix the issue. Now, if it were just any fan, I would probably just replace the fan - they're relatively cheap after all. However, this is a special fan. Aside: For what its worth, I feel bad that the graphics card blocks part of the fan, but it is the only slot the graphics card fits, so I had no choice. After pulling out my motherboard user guide, it looks like this is a fan placed directly on top of the chipset. To be perfectly honest, I have no clue what the purpose of the chipset is - but it sounds important. After some quick research, I see that it is responsible for providing the bridge between my CPU, RAM and graphics, among other things. Just a quick search at Newegg tells me that chipset fans can be purchased at pretty reasonable prices (< 20 dollars). Is it practical to replace this fan? It is an old computer as computers go and I wouldn't be terribly upset to upgrade the motherboard and processor, so perhaps this is a sign. Hardware Specs: Motherboard: Asus A8N-E Chipset: NVIDIA nForce4 Ultra

    Read the article

  • NFS share access - Permission denied

    - by rgngl
    I'm trying to share a directory on my NAS device(WD Mybook WE) with NFS to another machine on my local network. The directory on the NAS device looks like this: drwxr-x--- 15 git git 4096 Nov 17 01:05 git/ And id's of the user git on the NAS device is like this: [root@myhost DataVolume]# id git uid=505(git) gid=505(git) I played with many different parameters in the /etc/exports file and this is what I got there currently: /DataVolume/git 192.168.0.20(async,rw,no_root_squash,no_subtree_check) On the client side I have the user git and group git with the same id's to match the ones on the server. user@myclient:~$ id git uid=505(git) gid=505(git) groups=505(git) I mount the directory with: sudo mount myhost:/DataVolume/git -t nfs git/ and the mounted directory looks like: drwxr-x--- 15 git git 4096 Nov 17 01:05 git After these steps I can't seem to cd to that directory with any user, including git and root. I am getting a Permission denied error. Thanks in advance for any help.

    Read the article

  • Redirected to piratenpartji.nl. What can I do?

    - by Luke
    a few hours ago, I found a link to Kickass Torrent, which is blocked in my country, Italy and went for it. The link worked just fine but wasn't able to save anything. I renounced and continued normal navigation. I then noticed that everytime I try to access some pages, for instance google.com (but not Google.it) I receive a warning from Chrome that I'm being redirected through piratenpartji.nl Since I found a similar topic here on 'superuser' I tried what was proposed in the solution, namely shutting down adblock and trying again or trying Incognito mode. Nevertheless, no result. I performed a search with both Avira and Spybot SD but except for a couple cookies from other origin nothing came up. What do you suggest I do? Thanks in advance, feel free to ask any info that might be necessary Luke

    Read the article

  • How to copy-paste in good quality from Adobe Illustrator to MS One Note?

    - by Suzan Cioc
    When I copy some drawing in Illustrator, it stores it in clipboard in 3 formats: bitmap, device independent bitmap and enhanced meta-file. If drawing contains text, then meta-file version has no anti-aliasing. Below are examples in MS Word OneNote has no "Paste Special" so it always paste in EMF. Is it possible either to tell OneNote to paste not in EMF, or tell Illustrator to use anti-aliasing while storing picture with letters?

    Read the article

  • How do I install and use Windows Virtual PC in Windows 8?

    - by KronoS
    I really like the integrated Virtual Machine that Windows had built-in with Windows 7 with Windows Virtual PC. I'm looking to install that again. I'd like to be able to install multiple machines as I did before (XP, Ubuntu, Etc,.) but I can't seem to find Windows Virtual PC for Windows 8 any more. Is it still available?, and if not was there something setup in place to replace it? How do I use it? NOTE TO ALL: While this is an accepted self posted answer feel free to edit, comment, or add an answer of your own. If your answer is better than mine, I will accept. This question was a Super User Question of the Week. Read the blog entry for more details or contribute to the blog yourself

    Read the article

  • Installing Cygwin C and C++ compilers for NetBeans IDE 7.2

    - by user1294663
    I am very new to Cygwin, C, C++ and NetBeans IDE 7.2. My PC is running MICROSOFT WINDOWS 7 OS. I have read the documentation on how to install the Cygwin C C++ compilers. http://netbeans.org/community/releases/72/cpp-setup-instructions.html#compilers I have tried to run Cygwin setup.exe that has the most recent version of the Cygwin DLL is 1.7.16-1. I am not very sure which exact package to install when the Cygwin setup.exe installer prompted for the selection of packages to download and install. I want to install the Cygwin C and C++ compilers so that i can create C and C++ projects using NetBeans 7.2 I selected those packages that has contains the following names gcc, g++, gdb and make. Then i proceed on to install the selected packages The installation took up a long time so i stopped after about 45 minutes or so. I browsed the installation folder and i saw some packages i selected were installed. I noticed that some packages came in some sort of "zip" file with tar.gz extension. i added the folder path into the PATH variable in the windows 7 environment variables window. I think this command works C: cygcheck -c cygwin but the rest doesn't work i think. C: gcc --version C: g++ --version C: make --version C: gdb --version I tried to create the C C++ project using the Netbeans IDE 7.2 and the IDE pops out a dialog message saying that there was no c c++ compilers found. Have i made some mistake here? like installing the wrong packages or something else??? Are there packages shown in the Cygwin setup.exe installer that contains exact names and exact version that is compatible with NetBeans IDE 7.2?? This i am not too sure. Because i i think i didn't really see some required packages with exact names and versions. My question is : Which exact packages do i install using the Cygwin setup.exe installer so that i can create C & C++ projects using Netbeans IDE 7.2? and what other steps do i have to take note to ensure complete successful installation? do i have to wait all the selected required packages to be installed? I WOULD LIKE TO KNOW THE EXACT NAMES AND THE VERSIONS FOR THE REQUIRED PACKAGES (NAMES AND VERSIONS DISPLAYED IN THE CYGWIN SETUP.EXE INSTALLER WHEN PROMPTED) NEEEDED FOR C & C++ PROGRAMMING USING NETBEANS IDE 7.2??

    Read the article

  • When USB keyboard is plugged in on computer start-up, search results window is being opened multiple times

    - by Dvir Azulay
    As the title says - when my Alienware keyboard is plugged into my laptop during Windows 7 resume from sleep/hibernation, the windows search results and help window (F3, F1 on Windows 7) is being opened multiple times. This behavior won't stop until I pull out one of the two USB connectors this keyboard has. When I plug it back, everything is normal. Also, if I only connect one of the two during Windows resume, it won't happen. Do you have any idea what could cause this weird issue? Edit: Following the feedback on comments suggesting to log my keypress'es during the weird behavior, I've noticed it's actually F1, F2, F3 being spammed in an ordered sequence. Clicking on them manually didn't stop them from repeating.

    Read the article

  • How can I get Courier 10 Pitch font for Windows?

    - by David B
    I created some SVG drawings using Inkscape on my Ubuntu. I now want to edit the SVGs using Inkscape running on Windows 7. The problem: the drawings has text formatted with Courier 10 Pitch font which is missing from my Windows system. Hence, the text is formatted using another font, which messes everything up. How can I get this font for Windows? Or perhaps I can make Inkscape embed the font in the SVG from Ubuntu?

    Read the article

  • Mr Flibble: As Seen Through a Lens, Darkly

    - by Phil Factor
    One of the rewarding things about getting involved with Simple-Talk has been in meeting and working with some pretty daunting talents. I’d like to say that Dom Reed’s talents are at the end of the visible spectrum, but then there is Richard, who pops up on national radio occasionally, presenting intellectual programs, Andrew, master of the ukulele, with his pioneering local history work, and Tony with marathon running and his past as a university lecturer. However, Dom, who is Red Gate’s head of creative design and who did the preliminary design work for Simple-Talk, has taken the art photography to an extreme that was impossible before Photoshop. He’s not the first person to take a photograph of himself every day for two years, but he is definitely the first to weave the results into a frightening narrative that veers from comedy to pathos, using all the arts of Photoshop to create a fictional character, Mr Flibble.   Have a look at some of the Flickr pages. Uncle Spike The B-Men – Woolverine The 2011 BoyZ iN Sink reunion tour turned out to be their last Error 404 – Flibble not found Mr Flibble is not a normal type of alter-ego. We generally prefer to choose bronze age warriors of impossibly magnificent physique and stamina; superheroes who bestride the world, scorning the forces of evil and anarchy in a series noble and righteous quests. Not so Dom, whose Mr Flibble is vulnerable, and laid low by an addiction to toxic substances. His work has gained an international cult following and is used as course material by several courses in photography. Although his work was for a while ignored by the more conventional world of ‘art’ photography they became famous through the internet. His photos have received well over a million views on Flickr. It was definitely time to turn this work into a book, because the whole sequence of images has its maximum effect when seen in sequence. He has a Kickstarter project page, one of the first following the recent UK launch of the crowdfunding platform. The publication of the book should be a major event and the £45 I shall divvy up will be one of the securest investments I shall ever make. The local news in Cambridge picked up on the project and I can quote from the report by the excellent Cabume website , the source of Tech news from the ‘Cambridge cluster’ Put really simply Mr Flibble likes to dress up and take pictures of himself. One of the benefits of a split personality, however is that Mr Flibble is supported in his endeavour by Reed’s top notch photography skills, supreme mastery of Photoshop and unflinching dedication to the cause. The duo have collaborated to take a picture every day for the past 730-plus days. It is not a big surprise that neither Mr Flibble nor Reed watches any TV: In addition to his full-time role at Cambridge software house,Red Gate Software as head of creativity and the two to five hours a day he spends taking the Mr Flibble shots, Reed also helps organise the . And now Reed is using Kickstarter to see if the world is ready for a Mr Flibble coffee table book. Judging by the early response it is. At the time of writing, just a few days after it went live, ‘I Drink Lead Paint: An absurd photography book by Mr Flibble’ had raised £1,545 of the £10,000 target it needs to raise by the Friday 30 November deadline from 37 backers. Following the standard Kickstarter template, Reed is offering a series of rewards based on the amount pledged, ranging from a Mr Flibble desktop wallpaper for pledges of £5 or more to a signed copy of the book for pledges of £45 or more, right up to a starring role in the book for £1,500. Mr Flibble is unquestionably one of the more deranged Kickstarter hopefuls, but don’t think for a second that he doesn’t have a firm grasp on the challenges he faces on the road to immortalisation on 150 gsm stock. Under the section ‘risks and challenges’ on his Kickstarter page his statement begins: “An angry horde of telepathic iguanas discover the world’s last remaining stock of vintage lead paint and hold me to ransom. Gosh how I love to guzzle lead paint. Anyway… faced with such brazen bravado, I cower at the thought of taking on their combined might and die a sad and lonely Flibble deprived of my one and only true liquid love.” At which point, Reed manages to wrestle away the keyboard, giving him the opportunity to present slightly more cogent analysis of the obstacles the project must still overcome. We asked Reed a few questions about Mr Flibble’s Kickstarter adventure and felt that his responses were worth publishing in full: Firstly, how did you manage it – holding down a full time job and also conceiving and executing these ideas on a daily basis? I employed a small team of ferocious gerbils to feed me ideas on a daily basis. Whilst most of their ideas were incomprehensibly rubbish and usually revolved around food, just occasionally they’d give me an idea like my B-Men series. As a backup plan though, I found that the best way to generate ideas was to actually start taking photos. If I were to stand in front of the camera, pull a silly face, place a vegetable on my head or something else equally stupid, the resulting photo of that would typically spark an idea when I came to look at it. Sitting around idly trying to think of an idea was doomed to result in no ideas. I admit that I really struggled with time. I’m proud that I never missed a day, but it was definitely hard when you were late from work, tired or doing something socially on the same day. I don’t watch TV, which I guess really helps, because I’d frequently be spending 2-5 hours taking and processing the photos every day. Are there any overlaps between software development and creative thinking? Software is an inherently creative business and the speed that it moves ensures you always have to find solutions to new things. Everyone in the team needs to be a problem solver. Has it helped me specifically with my photography? Probably. Working within teams that continually need to figure out new stuff keeps the brain feisty I suppose, and I guess I’m continually exposed to a lot of possible sources of inspiration. How specifically will this Kickstarter project allow you to test the commercial appeal of your work and do you plan to get the book into shops? It’s taken a while to be confident saying it, but I know that people like the work that I do. I’ve had well over a million views of my pictures, many humbling comments and I know I’ve garnered some loyal fans out there who anticipate my next photo. For me, this Kickstarter is about seeing if there’s worth to my work beyond just making people smile. In an online world where there’s an abundance of freely available content, can you hope to receive anything from what you do, or would people just move onto the next piece of content if you happen to ask for some support? A book has been the single-most requested thing that people have asked me to produce and it’s something that I feel would showcase my work well. It’s just hard to convince people in the publishing industry just now to take any kind of risk – they’ve been hit hard. If I can show that people would like my work enough to buy a book, then it sends a pretty clear picture that publishers might hear, or it gives me the confidence enough to invest in myself a bit more – hard to do when you’re riddled with self-doubt! I’d love to see my work in the shops, yes. I could see it being the thing that someone flips through idly as they’re Christmas shopping and recognizing that it’d be just the perfect gift for their difficult to buy for friend or relative. That said, working in the software industry means I’m clearly aware of how I could use technology to distribute my work, but I can’t deny that there’s something very appealing to having a physical thing to hold in your hands. If the project is successful is there a chance that it could become a full-time job? At the moment that seems like a distant dream, as should this be successful, there are many more steps I’d need to take to reach any kind of business viability. Kickstarter seems exactly that – a way for people to help kick start me into something that could take off. If people like my work and want me to succeed with it, then taking a look at my Kickstarter page (and hopefully pledging a bit of support) would make my elbows blush considerably. So there is is. An opportunity to open the wallet just a bit to ensure that one of the more unusual talents sees the light in the format it deserves.  

    Read the article

  • Expanding existing DVCS Wiki

    - by A Lion
    A portion of my job is to maintain technical documentation for a rapidly expanding manufacturing company. Because it is only a portion of my job and the company's product line is expanding so quickly, I can't stay on top of the documentation. As a result, I've been yearning for an information management system with a handful of specific features. I've found many products that have a subset, but none that have all the features I'm looking for. I'm at the point of picking an existing product and expanding it to cover my desired feature set, however, this will be a pet project and I will be learning the underlying language as I go. So, the main question is which existing product will be the easiest to expand to cover the full feature set and has a relatively easy to learn language? Alternatively, have I missed another existing program that will cover the feature set or should be in my list of "close, but not quite there"? Feature Set web interface based on a distributed version control system (e.g., git) easy to edit by logged in novices (e.g. wiki, multimarkdown) outputs in more traditional formats (e.g., doc, odt, pdf) edits held in queue until editor/engineer/manager approves them (e.g., MS Word editing) [this is the really big elephant in list - suggestions on where to start appreciated] edits held in queue specifically for engineer approval [extra limb of the elephant in the list] well-supported in the open source community Closest, but not quite there ikiwiki - http://ikiwiki.info (php) lots of awesome functionality and extensions, including easy to edit and based on DVCS lacks a review/forward for review queue appears to be well-supported within the OSS community gitit - http://gitit.net/ (haskell) easy to edit and based on DVCS lots of outputs in traditional formats a great web-based gui diff interface lacks a review/forward for review queue appears to be primarily maintained by one individual

    Read the article

  • Would it be a good idea to work on letting people add arrays of numbers in javascript?

    - by OneThreeSeven
    I am a very mathematically oriented programmer, and I happen to be doing a lot of java script these days. I am really disappointed in the math aspects of javascript: the Math object is almost a joke because it has so few methods you can't use ^ for exponentiation the + operator is very limited, you cant add array's of numbers or do scalar multiplication on arrays Now I have written some pretty basic extensions to the Math object and have considered writing a library of advanced Math features, amazingly there doesn't seem to be any sort of standard library already out even for calculus, although there is one for vectors and matricies I was able find. The notation for working with vectors and matricies is really bad when you can't use the + operator on arrays, and you cant do scalar multiplication. For example, here is a hideous expression for subtracting two vectors, A - B: Math.vectorAddition(A,Math.scalarMultiplication(-1,B)); I have been looking for some kind of open-source project to contribute to for awhile, and even though my C++ is a bit rusty I would very much like to get into the code for V8 engine and extend the + operator to work on arrays, to get scalar multiplication to work, and possibly to get the ^ operator to work for exponentiation. These things would greatly enhance the utility of any mathematical javascript framework. I really don't know how to get involved in something like the V8 engine other than download the code and start working on it. Of course I'm afraid that since V8 is chrome specific, that without browser cross-compatibility a fundamental change of this type is likely to be rejected for V8. I was hoping someone could either tell me why this is a bad idea, or else give me some pointers about how to proceed at this point to get some kind of approval to add these features. Thanks!

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14  | Next Page >