Daily Archives

Articles indexed Tuesday September 11 2012

Page 14/18 | < Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >

  • EC2 hostname ubuntu and ejabberd

    - by aelbaz
    I have questions related to the host name in Ubuntu EC2 instances. I have a IPS elastics for hosts that want to be seen from the internet and I have pointed out in the DNS entries with the computer name to those ips. For example, for elastic IP 11.11.11.11 DNS I added my computer name www.example.com. But I also want to rename the machines which they have, because it is a parameter of the service running on them (ejabberd server). EC2 instances are restarted when changing the host name, and seen on the client requesting dhcp hostname to dhcp Amazon. My question is ... What is the safest method to change the hostname: dhcp client modify, insert the command in rc.local, etc. ..? Could I have a problem with the internal resolution of traffic between EC2 instances? thanks

    Read the article

  • VMM 2012 Adding Hosts in Trusted Forest

    - by Steve Evans
    I have two forests with a two way trust between them. VMM 2012 sits in ForestA and I can discover hosts in ForestA with no issue. When I try to discover hosts in ForestB I hit one of two issues: If I go through the GUI or use Powershell just like I normally do I get the following error on the job: Error (10407) Virtual Machine Manager could not query Active Directory Domain Services. Recommended Action Verify that the domain name and the credentials, if provided, are correct and then try the operation again. It doesn't matter which account I use. I've tried accounts from both forests, with Admin/Domain Admin permissions all over the place, etc Going through the GUI (can't find the switch in Powershell to duplicate this), I check the box "Skip AD Verification" and it causes the GUI to crash during discovery. I found an article (http://technet.microsoft.com/en-us/library/gg610641.aspx) that describes how to add a host in a disjoint namespace (even though that doesn't apply to me) and it says that VMM creates an SPN if one does not exist. So I verified that the correct SPN's exist in ForestB, that did not help the issue. I have a case open with PSS but they are stuck. I have VMM traces if anyone would like to see them. Any suggestions or ideas?

    Read the article

  • Can't get a display albums function to work... php [closed]

    - by Zhenia
    need your help with the code, please. I am trying to display an album from the database, but i just get some strange signs having no idea why... the signs are Albums Help me out if you know how to solve this problem. how can i maKe the code to display name of the album and amount of images in it? i am sure all is fine with the db. this is the function: function get_albums() { $albums = array(); // not always have got to put brackets $albums_query = "SELECT albums.album_id, albums.timestamp, albums.name, LEFT(albums.description, 50) as description, COUNT(images.image_id) as image_count FROM albums LEFT JOIN images ON albums.album_id = images.album_id WHERE albums.user_id = '{$_SESSION['user_id']}' GROUP BY albums.album_id"; $res = mysql_query($albums_query) or die(mysql_error().'<br>'.$albums_query); while($albums_row = mysql_fetch_assoc($res)){ $albums = array ( 'id' => $albums_row['album_id'], 'timestamp'=> $albums_row['timestamp'], 'name' => $albums_row['name'], 'description' => $albums_row['description'], 'count' =>$albums_row['image_count'] ); } return $albums; } and the other half of the code: <?php $albums = get_albums(); if(empty($albums)) { echo'<p>You don\'t have any albums</p>'; }else{ foreach($albums as $album){ echo'<p><a href="view_album.php?album_id=',$album['id'],'">',$album['name'],'</a>(',$album['count'],'images)<br /></p>'; } } ?>

    Read the article

  • Wake on Demand for Apache server in OS X 10.8

    - by Gary
    Mac OS X Mountain Lion does not have a Web Sharing box in the Sharing system prefs menu. It is thoroughly discussed on the web that the Apache server is available, and that it can be turned on manually in the command line, or by using a convenient Prefs Pane. That works while the computer is awake. But, when my computer goes to sleep, the server stops working, even though Wake for Network Access is checked in the Energy Saver Pref Pane. From the discussion on Bonjour, I see that this problem probably results from the fact that Apache isn't registered with Bonjour. Does that sound likely? If not, please make some suggestions. The connection is via hard-wired ethernet. If registration with Bonjour is the problem, I'd like to know how to register it. You gave a nice description of dns-sd, and the command description says dns-sd -R Name Type Domain Port [TXT...] (Register a service)", but I don't know what to use for "Name" or "Type", or the format of the domain. I tried some dns-sd -B searches and found nothing I could use as a model, and it doesn't show up in Bonjour Browser. Any suggestions would be appreciated.

    Read the article

  • My Domain Is Getting Blocked As Gambling

    - by Tim Scott
    I have a site at http://slotted.co. Some of my would-be users complain that their company firewall blocking access. At least one user told me it was flagged as a gambling domain, which it is not. What can I do about this? Incidentally I own some other domains, such as signupster.com, which redirect to my site. I wonder if a quick workaround would be to make that my main domain and have slotted.co redirect? Obviously I prefer in the long terms that slotted.co is considered clean.

    Read the article

  • IIS6 can't find site on local network

    - by chezy525
    I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

    Read the article

  • dhcpd pool exhaustion - What's the result?

    - by jarmund
    I have a DHCP server that serves leases to several houndred, maybe up to a thousand, different clients on an average day. The pool consists of 242 IPs, and due to the highly dynamic nature of the network, it's enough 99% of the time (most devices are gone from the network in a few minutes), despite having a lease time of 3600. Now, imagine if more clients than that connect to the network during an hour. The sollution is obvious: Decrease lease time, or increase the DHCP pool, however, what i would like to know: What happens when dhcpd has exhausted the pool? Are new DHCP requests simply ignored?

    Read the article

  • Best way to integrate applications to windows 7 install.wim image

    - by cyph3r
    I have right now an unmodified .iso of a windows 7 32bit and 64bit installation disk. And I need to integrate to that some applications (office, adobe reader etc) and windows updates so that when windows are installed the above applications/updates are already installed and working. Requirements: My output has to be a install.wim image containing the new/improved windows installation files because the deployment is done via a pxe server and a custom windowsPE enviroment. The procedure to create the install.wim has to be as automatic as possible. I can't create it manually every time I want to incorporate a new windows or application update to the image. The image will be installed on 100+ computers so it needs to be 'generic'. I've never done something like this before but from what I searched a possible solution to this issue would be: To create a reference installation (preferably on a vm so I can take snapshots) complete with its applications/updates/settings. After the complete setup I take a snapshot of the installation Run C:\Windows\System32\sysprep\sysprep.exe /oobe /generalize /shutdown to sysprep the machine. Boot to a WindowsPE enviroment and capture the .wim image using gimagex. Deploy the .wim and enjoy the rapid installation times. :D Does that sound ok? Would you recommend anything else? Right now the applications are installed after the installation of windows is complete. So the total installation time is quite long. That's why I need a different approach.

    Read the article

  • pg_dump not working - do I need to change order of $PATH?

    - by A4J
    I'm trying to set the $PATH to pick up the latest version of pg_dump as I'm currently getting a mismatch error while doing a migrate in my Rails app (I recently changed the schema type to SQL). I have added a new file in /etc/profile.d called pg_dump.sh, and inside that put: PG_DUMP=/usr/pgsql-9.1 export PG_DUMP PATH=$PATH:$PG_DUMP/bin export PATH On looking at echo $PATH, I get: /usr/local/rvm/gems/ruby-1.9.3-p194/bin:/usr/local/rvm/gems/ruby-1.9.3-p194@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p194/bin:/usr/local/rvm/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pgsql-9.1/bin:/root/bin And I still get the error. Do I need to change the order? If so any ideas how? Output of 'ls /usr/pgsql-9.1/bin': clusterdb droplang pg_archivecleanup pg_ctl pg_standby psql createdb dropuser pg_basebackup pg_dump pg_test_fsync reindexdb createlang ecpg pgbench pg_dumpall pg_upgrade vacuumdb createuser initdb pg_config pg_resetxlog postgres vacuumlo dropdb oid2name pg_controldata pg_restore postmaster And output of 'which pg_dump': /usr/bin/pg_dump Error message on running cap 'deploy:migrate': ** [out :: 46.4.9.199] pg_dump: server version: 9.1.4; pg_dump version: 8.4.11 ** [out :: 46.4.9.199] pg_dump: aborting because of server version mismatch ** [out :: 46.4.9.199] rake aborted! ** [out :: 46.4.9.199] Error dumping database output of 'pg_dump --version': pg_dump (PostgreSQL) 8.4.11

    Read the article

  • postfix, TLS and rapidssl - "verify error:num=19:unable to get local issuer certificate"

    - by technobuddha
    I have been googeling for days! I have a cert from rapidssl. I read up that the problem with num=20, is that indicates it doesn't know the issuer, or doesn't know the ROOT Cert, right? I run this command: openssl s_client -showcerts -connect smtp.server.com:465 I get this error: verify error:num=19:self signed certificate in certificate chain Here is what i have in my postfix main.cf, and what i have done: smtpd_tls_key_file = /etc/postfix/ssl/smtp.server.com.rsa.key (this is the private key) smtpd_tls_cert_file = /etc/postfix/ssl/smtp.server.com.PUBLIC.key (this is the public key given to me by rapidssl) smtpd_tls_CAfile = /etc/postfix/ssl/combo.csr.key This key has both the intermediate keys ON TOP, and the ROOT KEY on the bottom. Here is the Intermediate keys: https://knowledge.geotrust.com/library/VERISIGN/ALL_OTHER/geotrust%20ca/GT_QuickSSL_and_Premium_and_Trial_intermediate_bundle.pem and here is the root CERT: http://www.geotrust.com/resources/root_certificates/certificates/Equifax_Secure_Certificate_Authority.cer anyone know how to use rapidssl certs?

    Read the article

  • error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7]

    - by brazorf
    This error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] error is happening after i changed router. Actually, i found out that this error just happens on a ctrl+c signal, so it could be not representative about the error itself. The command i run is very basic: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory Basically, the rsync just stuck there and nothing's happening, until i ctrl+c. After interrupting the process i got the error in subject. I past the whole thing here: rsync -avvvvz --delete /source/path/ username@host:/path/to/direectory cmd=<NULL> machine=HOSTNAME user=username path=/path/to/direectory cmd[0]=ssh cmd[1]=-l cmd[2]=username cmd[3]=HOSTNAME cmd[4]=rsync cmd[5]=--server cmd[6]=-vvvvlogDtprze.iLsf cmd[7]=--delete cmd[8]=. cmd[9]=/path/to/direectory opening connection using: ssh -l username HOSTNAME rsync --server -vvvvlogDtprze.iLsf --delete . /path/to/direectory note: iconv_open("UTF-8", "UTF-8") succeeded. ^C[sender] _exit_cleanup(code=20, file=rsync.c, line=541): entered rsync error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] [sender] _exit_cleanup(code=20, file=rsync.c, line=541): about to call exit(130) The authentication runs on ssh via rsa key. I tried basic troubleshoot such as: ping the remote host ssh -l username remote.host check software firewall logs i asked the remote host sysadmin to check for logs, and when i run that command a ssh connection is actually being established and i can state there is no comunication/authentication/name resolution issue here. Rolling back to old router make this work again. Both client and server are running ubuntu 10.04. Try to take a look at my router configuration, where i'm no experienced at all, but i didnt see any "suspect" (what i was looking for is firewall blocking something) setting. The router itself is DLINK DVA-G3670B. Any suggestion? Thank You F.

    Read the article

  • Is it possible to add a WiFi HotSpot to an already established LAN, keep the two separate, and not modify the primary router?

    - by user12844
    I have a set up where my Cisco ASA is sitting in one facility, providing access to the Internet for two buildings. The two buildings are geographically separated by a Wireless Bridge spanning about 10 miles. All computers and equipment inside the LAN are on the same subnet (its pretty small) and we have WiFi AP's in both locations providing Wired and Wireless access to the LAN. Given all the BYOD (Ipods, and SmartPhones etc...) coming into the office as well as Visiting reps etc... we would like to also provide a non-secure, device independent (the devices cannot see or communicate with each other), and LAN independent (the devices cannot see or use anything on the LAN) HotSpot that anyone could use for their Devices that gives them access to the Internet ONLY without needing a password. I get that this could be possible at the facility with my Cisco if I messed with it and created VLANs etc... but then I would need to get it across my Bridge as well and don't think that would be possible without serious reconfiguration of everything. Would really like some kind of magic drop in solution that can kind of piggy back on my LAN without really needing to do very many if any changes to the current set up.

    Read the article

  • Block Websites at Work

    - by user791022
    At work there are about 40 PCs. I want to block all the websites and only allow a few Domains/Websites for operators. A few operators can access anything. I want something quick and easy so I can filter the Block/Allow websites for all computers from one main computer, like a server or something. Windows Vista Home and Windows 7 Home are installed on the PCs. Is there any software can do this? PS: Please don't answer about Microsoft Windows Server OS..

    Read the article

  • Is my Cisco switch port bad?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • snmptt not translating traps, even with translate_log_trap_oid=1

    - by mbrownnyc
    I am having some trouble configuring snmptt to properly translate snmp traps. The following is a problem: /etc/snmp/snmptt.conf reflects: EVENT fgFmTrapIfChange .1.3.6.1.4.1.12356.101.6.0.1004 "Status Events" Critical FORMAT $* EXEC /usr/local/nagios/libexec/eventhandlers/submit_check_result $r "snmp_traps" 2 "$O: $+*" "$*" SDESC Trap is sent to the managing FortiManager if an interface IP is changed Variables: 1: fnSysSerial 2: ifName 3: fgManIfIp 4: fgManIfMask EDESC when a trap is received, /var/log/messages reflects: Sep 6 12:07:32 SNMPMANAGERHOST snmptrapd[15385]: 2012-09-06 12:07:32 <UNKNOWN> [UDP: [192.168.100.2]:162->[192.168.100.31]]: #012.1.3.6.1.2.1.1.3.0 = Timeticks: (707253943) 81 days, 20:35:39.43 #011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.12356.101.6.0.1004 #011.1.3.6.1.4.1.12356.100.1.1.1.0 = STRING: FGTNNNNNNNNN #011.1.3.6.1.2.1.31.1.1.1.1.10 = STRING: internal4 #011.1.3.6.1.4.1.12356.101.6.2.1.0 = IpAddress: 192.168.65.100 #011.1.3.6.1.4.1.12356.101.6.2.2.0 = IpAddress: 255.255.255.0 Sep 6 12:07:37 SNMPMANAGERHOST icinga: EXTERNAL COMMAND: PROCESS_SERVICE_CHECK_RESULT; 192.168.100.2; snmp_traps; 2; enterprises.12356.101.6.0.1004: enterprises.12356.100.1.1.1.0:FGTNNNNNNNNN ifName.10:internal4 enterprises.12356.101.6.2.1.0:192.168.65.100 enterprises.12356.101.6.2.2.0:255.255.255.0 Since the icinga entry reflects the EXEC, it's obvious there is no translations occurring by snmptt. I have verified that translate_log_trap_oid and net_snmp_perl_enable is enabled in snmptt.ini When using --debug=1 to start snmptt, I see the following in the --debugfile: ********** Net-SNMP version 5.05 Perl module enabled ********** The main NET-SNMP version is reported as NET-SNMP version: 5.5. What else can be done to verify that snmptt is configured properly to translate traps? I have run snmptt-net-snmp-test to verify whatever net-snmp-perl version I have installed properly supports translations. The output indicates it does. /root/snmptt_1.3/snmptt-net-snmp-test --best_guess=2 SNMPTT Net-SNMP Test v1.0 (c) 2003 Alex Burger http://snmptt.sourceforge.net MIBS:RFC1213-MIB best_guess: 2 Testing translateObj ******************** Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=disabled Test passed. Result: sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=enabled Test passed. Result: RFC1213-MIB::sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=disabled Test passed. Result: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=enabled Test passed. Result: RFC1213-MIB::.iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing getType *************** Testing: .1.3.6.1.2.1.4.1 Test passed. Result: INTEGER Testing: ipForwarding Test passed. Result: INTEGER Testing Description ******************* Test passed. Result: ------------------------------------------------- The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value. ------------------------------------------------- I have manually gone through the MIB with the definition that's not resolving, and verified that it is properly linking back to the proper resolved definition. It is: FORTINET-FORTIGATE-MIB.txt contains: fgFmTrapIfChange NOTIFICATION-TYPE OBJECTS { fnSysSerial, ifName, fgManIfIp, fgManIfMask } STATUS current DESCRIPTION "Trap is sent to the managing FortiManager if an interface IP is changed" ::= { fgFmTrapPrefix 1004 } fgFmTrapPrefix OBJECT IDENTIFIER ::= { fgMgmt 0 } fgMgmt OBJECT IDENTIFIER ::= { fnFortiGateMib 6 } fnFortiGateMib ::= { fortinet 101 } IMPORTS FnBoolState, FnIndex, fnAdminEntry, fnSysSerial, fortinet FROM FORTINET-CORE-MIB fortinet MODULE-IDENTITY ::= { enterprises 12356 } LOOKS GOOD!!!!! 1.3.6.1.4.1.12356.101.6.0.1004 I've exhausted all the documentation and even posted fruitlessly in the snmptt-users mailing list. I can not prove it is the MIB. Why would snmptt fail to translate traps? Thanks, Matt

    Read the article

  • Cisco ASA dropping IPsec VPN between istself and CentOS server

    - by sebelk
    Currently we're trying to set up an IPsec VPN between a Cisco ASA Version 8.0(4) and a CentOS Linux server. The tunnel comes up successfully, but for some reason that we can't figure out, the firewall is dropping packets from the VPN. The IPsec settings in the ASA sre as follows: crypto ipsec transform-set up-transform-set esp-3des esp-md5-hmac crypto ipsec transform-set up-transform-set2 esp-3des esp-sha-hmac crypto ipsec transform-set up-transform-set3 esp-aes esp-md5-hmac crypto ipsec transform-set up-transform-set4 esp-aes esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map linuxserver 10 match address filtro-encrypt-linuxserver crypto map linuxserver 10 set peer linuxserver crypto map linuxserver 10 set transform-set up-transform-set2 up-transform-set3 up-transform-set4 crypto map linuxserver 10 set security-association lifetime seconds 28800 crypto map linuxserver 10 set security-association lifetime kilobytes 4608000 crypto map linuxserver interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption aes hash sha group 2 lifetime 28800 crypto isakmp policy 2 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 3 authentication pre-share encryption aes-256 hash md5 group 2 lifetime 86400 crypto isakmp policy 4 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 5 authentication pre-share encryption aes-192 hash md5 group 2 group-policy linuxserverip internal group-policy linuxserverip attributes vpn-filter value filtro-linuxserverip tunnel-group linuxserverip type ipsec-l2l tunnel-group linuxserverip general-attributes default-group-policy linuxserverip tunnel-group linuxserverip ipsec-attributes pre-shared-key * Does anyone know where the problem is and how to fix it?

    Read the article

  • nginx php-fpm keeps downloading files

    - by Sam Williams
    vhost: server { listen *:8080; location / { root /var/www/default/pub; index index.php; # if file exists return it right away if (-f $request_filename) { break; } if (!-e $request_filename) { rewrite ^(.+)$ /index.php$1 last; break; } } # serve static files directly location ~* \.(jpg|jpeg|gif|css|png|js|ico|html)$ { access_log off; expires max; } location ~* \.php$ { # By all means use a different server for the fcgi processes if you need to fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } location ~ /\.ht { deny all; } } http://192.168.135.128/index.php loads just fine... http://192.168.135.128/public_/html/index.php downloads...

    Read the article

  • Microsoft Office tracking license marks/keys in saved files (doc/docx/xls etc.)?

    - by pawel159
    Does Microsoft Office use any marks/keys in saved files, that can track the computer and software license using which file was saved? E.g.: I use Office at work and save files on pendrive. When I'm home I recall to check something and introduce little modifications. I'd save this file using MS Office Home and Student license, but at work I will be redistributing this file and it should look as it was saved at work, with company's license (not my private). Will saving it at work once again wipe license marks from home (if any exist)?

    Read the article

  • Windows 7 - Add folder to Explorer Favorites navigation pane from the Command Line

    - by nondescript1
    In Windows 7 is there a way to add a location to the Explorer Favorites navigation pane from the command line? I'm working with systems that are frequently re-imaged, and I would like to automate adding a number of favorite folders to explorer. I imagine these favorites are also stored in the registry. If someone knows where, I could probably automate managing them through the reg command, although this is less than ideal. I've looked at a number of locations related to explorer suggested here, but haven't found them yet. For information on customizing the favorites section of the navigation pane with Explorer, see http://www.howtogeek.com/howto/10357/add-your-own-folders-to-favorites-in-windows-7/

    Read the article

  • Why do Floatbox popups stop other animations when finished closing?

    - by isherwood
    I'm trying to essentially run a callback function when a Floatbox popup is closed via a hyperlink inside the popup. I want the page to scroll to the top and my login box to fade in. I'm using the following code: function showLogin() { jQuery('#header_no_theme_login_popup', parent.document.body).show(); window.parent.window.scrollTo(0,0); window.parent.fb.end(); } This works fine, but if I try to use jQuery fadeIn, the fade effect is truncated when the Floatbox popup finishes closing, leaving it with partial opacity. jQuery scrollTo doesn't seem to want to work at all. Thanks much.

    Read the article

  • Hitting the ctrl button lowers my volume

    - by Cassandra
    I have tried googling this and no one else seems to either have this problem, or find it to be a problem, but it is very annoying to me. Everytime I accidentally hit my ctrl key by itself on my keyboard (I am using windows 7) my volume automatically lowers to a very low volume and then I can't hear anything. It's very annoying whenever I am on a game and/or on skype and I accidentally hit ctrl and then I can't hear anything or anyone!! How can I turn this feature off?

    Read the article

  • High frequency, kernel bypass vs tuning kernels?

    - by Keith
    I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

    Read the article

  • Unable to connect to Amazon EC2 without using PPK file

    - by Krishna
    I have a build job which runs on Hudson and synchronizes content from an Amazon AWS server. This is written in shell I have a PPK file given to me which can establish the connectivity Here is the problem. The build script I use doesn't establish the connectivity in the code. So, I manually connect the host thro the PPK file using Putty and then run the job, then it works fine I am new to the shell stuff. Could someone help me out by suggesting how I can establish connectivity using the PPK file in the shell so I do not have to do it manually thro Putty? Thanks, Krishna

    Read the article

  • How to input 64-bit hex values in octave

    - by Chris Ashton
    I'm trying to use Octave as a programmer's calculator. I want to input a 64-bit pointer, but when I do apparently the 64-bit value gets silently truncated to 32-bit: octave:44> base_ptr=0x1010101020202020 base_ptr = 538976288 octave:45> uint64(base_ptr) ans = 538976288 octave:46> printf("%lx\n", base_ptr) 20202020 So it seems like it's truncated the input value to the low 32-bits. I would use scanf, but the docs say it should only be used internally. How can I input the full 64-bit value? Alternately, is there some awesome free programmer's calculator out there for Windows? (I know Windows calculator has a programmer's mode but I would like arbitrary variable support). I tried using my ti-89 but it also doesn't support 64-bit hex.

    Read the article

  • Please help me get rid of asmonitor.exe

    - by LCD Fire
    It might be silly and I trully apologize if the question is not apropriate here, but I have really tried and got to nowhere. I have a windows xp startup error which indicates something about asmonitor.exe program from the ActualSpy keylogger. I had installed but removed ActualSpy keylogger using Superantispyware or something close. I have searched the registries and found a asmonitor entry deleted. I looked at startup programs and can not find the asmonitor program. In addition, I searched the c: drive using regular explorer search and searched using ESET NOD32 antivirus. In each case I cannot find the application... I have even looked at startup programs using msinfo32 command. msconfig-startup NOTHING! it drives me crazy! I can't get rid of it. it is still showing up at windows startup! Where do I find this little program? where is it located? I don't want it to keep showing up. I don't want programs that can do it.. or maybe free ones. But I prefer manual solutions. aren't are any?

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >