Daily Archives

Articles indexed Monday November 5 2012

Page 14/17 | < Previous Page | 10 11 12 13 14 15 16 17  | Next Page >

• How can Bonjour be setup to function over a VPN connection using Mac OS X — Mountain Lion Server?

  - by Ben Coppock

  I purchased Mountain Lion Server for our office thinking that Bonjour would automatically enable any computers connected via VPN to see all computers and applications (such as Bento) running on the office network. The hope was that those of us working at home would feel just like we were in the office, with all network services working transparently over the VPN connection. However, I see that Bonjour (aka mDNS) is not enabled to work over the VPN by default. Can I configure Mountain Lion Server to automatically pass Bonjour traffic over the VPN? Is there any reason not to do this?

  Read the article

• Potential impact of large broadcast domains

  - by john

  I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

  Read the article

• NetApp and Hyper-V 2012 best practice/whitepapers?

  - by grimstoner

  We've recently acquired a NetApp/Cisco UCS solution, and I'd like to gather some background knowledge as to the best practices when setting up Hyper-V 2012 on such a solution. There is an upcoming seminar (in the Netherlands, http://www.realdolmen.com/nl/MSHyper-v-2012_NetApp), but it's in Dutch, and a couple of weeks away... Does anyone have some whitepapers/documentation about such a setup, or hasn't it been done before?

  Read the article

• Nginx and automatic updates

  - by Desmond Hume

  I'm on Ubuntu 12.04.1 with unattended-upgrades configured for automatic security updates, and I installed Nginx by first adding deb http://nginx.org/packages/ubuntu/ lucid nginx deb-src http://nginx.org/packages/ubuntu/ lucid nginx to /etc/apt/sources.list file, just as was suggested by the official wiki, and then by sudo apt-get update sudo apt-get install nginx which installed Nginx with all the standard modules. But now I think I could make good use of one or two of the Nginx optional modules, like the gzip precompression module or some security-related one. So far, I see two ways of adding an optional module to Nginx, one is compiling and installing from the source code and the other is described in this article. So, which of the ways should I choose so that automatic updates still run for and apply to Nginx and its optional modules? Or should I create a cron job with a command/script specific for Nginx instead of using unattended-upgrades utility? Can I choose between volume updates and security-only updates to be automatically applied to the standard and optional modules? And finally, is there a possibility to automatically update Nginx's modules on the fly (without any connections having been dropped), like the documentation suggests it's possible with sudo kill -USR2 $( cat /run/nginx.pid ) P.S. Actually I'm not certain if unattended-upgrades utility would automatically update the standard modules in the first place, not enough time has passed since Nginx was installed to say for sure.

  Read the article

• Read access to Active Directory property (uSNChanged)

  - by Tom Ligda

  I have an issue with read access to the uSNChanged property when doing LDAP searches. If I do an LDAP search with a user that is a member of the Domain Admins group (UserA), I can see the uSNChanged property for every user. The problem is that if I do an LDAP search with a user (UserB) that is not a member of the Domain Admins group, I can see the uSNChanged property for some users (UserGroupA) and not for some users (UserGroupB). When I look at the users in UserGroupA and compare them to the users in UserGroupB, I see a crucial difference in the "Security" tab. The users in UserGroupA have the "Include inheritable permissions from this object's parent" unchecked. The users in UserGroupB have that option checked. I also noticed that the users in UserGroupA are users that were created earlier. The users in UserGroupB are users created recently. It's difficult to quantify, but I estimate the border between creation time between the users in UserGroupA and UserGroupB is about 6 months ago. What can cause the user creation to default to having that security property checked as opposed to unchecked? A while back (maybe around 6 months ago?) I changed the domain functional level from Windows Server 2003 to Windows Server 2008 R2. Would that have had this effect? (I can't exactly downgrade the domain functional level to test it out.) Is this security property actually the cause of the issue with read access to the uSNChanged property on LDAP searches? It seems correlated, but I'm not sure about causation. What I want in the end is for all authenticated users to have read access to the uSNChanged property for all users when doing an LDAP search. I would also be OK if I could grant read access for that property to an AD group. Then I can control access by adding members to the group.

  Read the article

• Windows 8 with LiveID login authenticates as Guest to remote SQl Server

  - by Tim Long

  I have a network where several users are using Office Accounting 2009 in multi-user client/server mode. OA is built on SQL Server. One PC acts as the 'server' and has the SQl Server instance, the others have only the application installed and no SQL instance, all of the apps connect remotely to the SQL instance on the 'server'. I'm using the term 'server' loosely here, it is just a normal workstation that happens to be designated as the server and runs the SQL instance. There is no NT domain, all user accounts are local accounts. The way that OA works in multi-user mode is that each user is required to have a local account with the same username and password on both the client and 'server' PCs. This has been working well, no along comes Windows 8. I use my 'Microsoft Account' aka LiveID to log into Windows 8. Office Accounting runs fine and attempts to connect to the database, but fails, 'you do not have permission to perform this operation'. In the SQL logs, I get this error: 2012-10-28 17:54:01.32 Logon Error: 18456, Severity: 14, State: 11. 2012-10-28 17:54:01.32 Logon Login failed for user 'SERVER\Guest'. Reason: Token-based server access validation failed with an infrastructure SERVER is the hostname of the server. So it seems to be authenticating as 'Guest'?? To verify this, I enabled the Guest account on the 'server' PC and then added Guest as an allowed user within Office Accounting (this simply creates the user in SQL and gives it an appropriate database role). Sure enough, My Windows 8 PC was then able to connect to the database when using Office Accounting. Clearly, having users authenticate as 'Guest' stinks from a security and auditing standpoint. So what I need are some ideas for how to work around this. I've tried switching the Windows 8 PC to a 'local account' and that works too, but requires giving up significant functionality on the Windows 8 PC. What I really need is a way to force the Windows 8 PC to use a specific set of credentials when connecting to the remote SQL instance. Office Accounting takes the logged in username, which is my LiveID and doesn't correspond to any Windows user name. Anyone solved this issue?

  Read the article

• booting FreeBSD 9 from USB stick: boot error

  - by ssc

  I am trying to boot FreeBSD 9 from a USB stick that I created following the official guidelines: dd if=FreeBSD-9.0-RELEASE-i386-memstick.img of=/dev/da0 bs=64k Booting fails with a simple 'boot error'. I have used this USB stick for quite a while for the very purpose of booting / installing new OSs, but I tried a different one anyway - same problem. I have also reproduced the issue on a different machine. I've acquired to image file over torrent which AFAIK has an md5 check built in, but I downloaded it again anyway directly from a FreeBSD mirror. Same result. Does anyone have any success with this ? I did not find anything related online which seems to suggest this is not a well-known problem. Does anyone have a thought where else to search for the cause of the problem ?

  Read the article

• javac compiler throwing error in CentOS 5.7

  - by Julio Menendez

  I'm trying to install Red5 on a vps running CentOS 5.7 in MediaTemple using this how-to (dv):Install Red5 Media Server but on step 7 I get this error: BUILD FAILED /usr/local/red5/build.xml:217: The following error occurred while executing this line: /usr/local/red5/build.xml:238: Error running /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/bin/javac compiler Any idea how to fix it? Already Google and several users have had this same issue but none posted the solution or they never solved. UPDATE: Some more details: running ant -v dist shows that is a memory problem: Caused by: java.io.IOException: Cannot run program "/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/bin/javac": java.io.IOException: error=12, Cannot allocate memory at java.lang.ProcessBuilder.start(ProcessBuilder.java:475) at java.lang.Runtime.exec(Runtime.java:610) at org.apache.tools.ant.taskdefs.Execute$Java13CommandLauncher.exec(Execute.java:862) at org.apache.tools.ant.taskdefs.Execute.launch(Execute.java:481) at org.apache.tools.ant.taskdefs.Execute.execute(Execute.java:495) at org.apache.tools.ant.taskdefs.compilers.DefaultCompilerAdapter.executeExternalCompile(DefaultCompilerAdapter.java:522) ... 32 more Caused by: java.io.IOException: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) at java.lang.ProcessImpl.start(ProcessImpl.java:81) at java.lang.ProcessBuilder.start(ProcessBuilder.java:468) ... 37 more and I defined _JAVA_OPTIONS="-Xms64m -Xmx128m" and export ANT_OPTIONS=-Xmx128m and I tried with Xmx512m in both cases, no luck. Thanks!

  Read the article

• USB 3.0 + eSATA docking station for 2,5" (and optionally. 3,5") SATA drives [closed]

  - by AnNaSF

  I am looking for a USB 3.0 + eSATA docking station for 2,5" (and optionally. 3,5") SATA drives in order to easily connect some of my (formerly internally used) drives to me laptop which is equipped with an eSATA port. I am currently tending to buy this one: http://www.amazon.de/Uspeed-Superspeed-Externe-Festplatten-Chipsets/dp/B0087B9NE8/ Anyone any experiences with this device? Anyone possessing technically equivalent device which he/she can recommend? Thanks a lot!

  Read the article

• How can I forward an application with X11 in grayscale

  - by ??????? ???????????

  I am trying to run a graphical application at home and display it on a it on a laptop which is located about six routing hops away. The problem is that the connection is so slow (or rather there is so much GOOEY being transfered) that the mouse is unresponsive and it takes a "long time" to redraw the window even at a resolution of 800x600 pixels. The connection speeds are 10MBit up at home and about 1MBit down on the laptop, which I think should be sufficient for looking at some GUI in (almost) real time. Since this traffic is sent over over a secure shell, I have enabled Compression with highest CompressionLevel along with Ciphers set to blowfish-cbc. This has substantially improved the responsiveness of the application, making it nearly usable. However, my goal is to improve the performance even further by sacrificing colors and even frame rate. The application to be displayed a Qemu SDL window with a graphically-oriented OS in it. This is not strictly relevant, but perhaps there are options to tweak the SDL output which I am not aware of. A possible workaround would be to run the application in a "hidden" X server and enabling TigerVNC on that X server. This would automatically give me the benefits of an optimized VNC viewport, but the goal is to do without (reduce complexity). The question I'm asking is what are my options for reducing the data-rate generated on the server in order to make the graphical application more usable on the client. As mentioned, colors are not important and I could probably work with 5-16 fps. Both machines are running Gentoo with the software in question being: workstation X.Org X Server 1.10.4 OpenSSH_5.8p1-hpn13v10, OpenSSL 1.0.0e QEMU emulator version 0.15.1 (qemu-kvm-0.15.1) laptop X.Org X Server 1.12.2 OpenSSH_5.8p1-hpn13v10lpk, OpenSSL 1.0.0j

  Read the article

• Different routing rules for a particular user using firewall mark and ip rule

  - by Paul Crowley

  Running Ubuntu 12.10 on amd64. I'm trying to set up different routing rules for a particular user. I understand that the right way to do this is to create a firewall rule that marks the packets for that user, and add a routing rule for that mark. Just to get testing going, I've added a rule that discards all packets as unreachable: # ip rule 0: from all lookup local 32765: from all fwmark 0x1 unreachable 32766: from all lookup main 32767: from all lookup default With this rule in place and all firewall chains in all tables empty and policy ACCEPT, I can still ping remote hosts just fine as any user. If I then add a rule to mark all packets and try to ping Google, it fails as expected # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 # ping www.google.com ping: unknown host www.google.com If I restrict this rule to the VPN user, it seems to have no effect. # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 -m owner --uid-owner vpn # sudo -u vpn ping www.google.com PING www.google.com (173.194.78.103) 56(84) bytes of data. 64 bytes from wg-in-f103.1e100.net (173.194.78.103): icmp_req=1 ttl=50 time=36.6 ms But it appears that the mark is being set, because if I add a rule to drop these packets in the firewall, it works: # iptables -t mangle -A OUTPUT -j DROP -m mark --mark 0x01 # sudo -u vpn ping www.google.com ping: unknown host www.google.com What am I missing? Thanks!

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• How to use AND/OR Building Block content in a Word 2007 template

  - by JimmyJames

  I am creating a Schedule of Work template and am successfully using Developer Tab and Quick Parts to allow user to choose content on an "either/or" basis: either A; OR B; OR C; etc., essentially choose one option from many. One Building Block control, one paragraph, nice and clean. Now what I need to do but cannot seem to figure out, is how to allow user to choose content on an "and/or" basis: either A AND B; A OR B AND C; B AND D AND E OR F; etc., essentially choose several options from many on a variable basis. One Building Block control, maybe one paragraph, maybe three or more paragraphs. Not so clean. I thought of building choice options for all possible paragraph combinations, but I can have as many as 7 or 8 different paragraphs, and that solution quickly becomes unworkable. Multiple controls--some of which will be left unused doesn't work either, since I cannot find an easy way to have a "Choose or Delete" control that actually deletes if "Delete" is chosen. Recommendations are most welcome.

  Read the article

• Automatic Excel Script

  - by Thomas

  I am a 6th year medical student and I'm working on my thesis. I have no experience with programming whatsoever, a friend recommended me to post my question here. I am strugling with the following problem: I have data of 400 patients, stored in 400 different excel files. Each file contains 34 columns in a specific order, let's say A to Z. The order is the same in each of these 400 files. Now I need to a make a new excel document that contains the first column of each patient. So I need all the first columns of my 400 different excel files, lined up next to each other in a new document. Preferebally in the form of a automatic script. After that I want to do the exact same thing but for the second column, then the third and so on. This is probably a problem that has already been solved. Otherwise could someone help me out? You have my thanks!

  Read the article

• Master does not appear to be a git repository error

  - by EmmyS

  I've inherited a position and instructions for creating a new git repository. Unfortunately I've run into problems and no one here knows what to do. Hoping someone can help me out. Here are the instructions I was left: Create a new repository: For these steps you need to be in the gitosis-admin repository, if you don't have it, in a suitable parent folder do: git clone [email protected]:gitosis-admin.git Edit gitosis.conf file - in gitosis-admin root, under [group base-repo] section, add the name of the new repo to the end of the "writable =" section. Commit change and push back to gitosis-admin master. For the next commands, my_new_project represents the name of your project mkdir my_new_project cd my_new_project git init Copy in any files you want to use to start the repo git commit -a -m "Initializing new repository" git remote add origin [email protected]:my_new_project.git git push master git push master:qa So I did 1 and 2, with no problem. It created a local folder on my machine called gitosis-admin. I edited the gitosis.conf file as indicated. But when I try to do step 3 (which I assume is git push gitosis-admin master) bash tells me that fatal: 'master' does not appear to be a git repository fatal: The remote end hung up unexpectedly What am I doing wrong?

  Read the article

• What software will tell me if I've already downloaded a video? [closed]

  - by dave

  (I use Linux KNOPPIX (distro 7.0.2, ver 3.3.7) on hard drive.) I download videos of TV programs from the 60s and 70s (mainly from youtube). I copy the youtube URL then paste it into www.keepvid.com to download it (usually .mp4 format). Having now got dozens of such video files (and growing) on my hard drive, I'd like to organise them. WHAT I'D LIKE TO DO IS: Say I find a new vid (of a TV prog) on youtube (or another site), and I'm about to download it. It's possible that I've WATCHED IT BEFORE but have forgotten. So is there software out there that I can run which will do the following: Check for me if I've ALREADY WATCHED the vid that I'm about to download. At the moment, once I've watched a vid on my hard drive, I move the file to another directory called "Watched". But this of course doesn't alert me in the immediate way that I want. . It would crudely suffice, if the software told me AFTER I've downloaded the vid, if I've ALREADY WATCHED it (ie if it's already in my "Watched" directory, or perhaps in a "watched" list). I sometimes alter the filename of the original video file on hard drive, so this might spoil a comparison. If the software alerts me to the fact that I've already watched the vid (preferably BEFORE I download it), then this will allow me to confidently download only new vids that I haven't watched before, and save me duplicating my effort. I'd be most grateful if anyone can suggest such a piece of software, or an alternative solution. I'll be honest, I avoid software that infringes your privacy and control - you know, software that automatically does things behind your back, like upgrades itself over the internet, puts things on your hard drive that you didn't ask for, or sends information from your hard drive to websites.

  Read the article

• How do I use different audio devices for different apps in Windows 8?

  - by Eclipse

  Besides switching the default audio device, how can I send the audio from one app (say x-box music) to one audio device, and another (say the video app) to another audio device? Edit: Looking further, I found this: http://channel9.msdn.com/Events/BUILD/BUILD2011/APP-408T At 16:16, he demonstrates exactly what I'm wanting to do, but when I go to the devices charm, I get a message: "You don't have any devices that can receive content from Music".

  Read the article

• Create shortcut key to insert new row using Excel 2010

  - by Dave Jarvis

  Tried to create a macro in Excel to insert a row: Sub InsertRow() ' ' InsertRow Macro ' ' Keyboard Shortcut: Ctrl+Shift+I ' Selection.EntireRow.Insert End Sub However, this does not insert a new row without first manually selecting a row. Every solution I've found requires that a row be highlighted before inserting a new row. See also: http://www.shortcutworld.com/en/win/Excel_2010.html How would you create a shortcut key (e.g., Ctrl+Shift+J) to highlight the current row and insert a new row? Thank you! Update Looks like Shift+Space highlights the current row.

  Read the article

• How can I view and sort after the page count for multiple PDF files in a Windows file explorer?

  - by grunwald2.0

  I unsuccessfully used the "pages" feature in Windows Explorer, as well as in Directory Opus 10 and Free Commander XT (which I installed just for that reason, to try it out) to display the page count of multiple PDFs in a folder. All my PDF's are free to edit, i.e. not write-protected. I don't understand why any PDF reader can display the (correct) page number, but none of the file explorers can? (In the "details" view of course.) The only documents whose page count is displayed are MS Word documents. Do I have to use Adobe Bridge? (I didn't try it.) On a side-note: Did that change in Windows 8? Initial research: Google search was unsuccessful, the only slightly related SE topic I found was "How to count pages in multiple PDF files?".

  Read the article

• Can't access unprotected .pst file in Outlook 2010

  - by KGraves

  My father has a Windows 7 x64 system with 32-bit Outlook 2010. He asked me to access his archived mail to get to some old mail. When going to open the file I'm asked for a password (he never applied one) and I get a message saying "password is incorrect. Re-Type password". Since he told me that he never set a password I tried opening the .pst with Nucleus, a tool that allows me to view the .pst's. Does anyone know what the deal is? With the free version of Nucleus we can't view the attachments.

  Read the article

• /srv/mm/Music (etc) Twonky won't scan here for media

  - by Hamid

  Is there something special about /srv/mm/ that Twonky server refuses to scan there? I previously had my system set up with all my Music, Video and Photo folders in /srv/mm shared by Samba, miniDLNA etc, with no problems. I came to install Twonky to replace miniDLNA and after two days of tearing my hair out, changing permissions and owners of the directories I ended up making a new directory at /multimedia and moved my Music, Video and Photo folders in there. Twonky then scanned them all straight away with no problems. I'm running Arch Linux (plugapps specifically) on a NAS. The solution is already implemented (moving the directory) I'm just wondering technically why Twonky might have refused to look for my media in the /srv/mm directories.

  Read the article

• svn client timeout on windows 7 64 bit

  - by nopuck4you

  I upgraded my PC to Windows 7 64 bit Home Premium - clean install. Since then I've tried to install the following SVN clients: Tortois 1.6.6 64bit and 32bit, Tortois 1.6.5 64bit, SlikSVN, SmartSVN, and a couple others. None of them will connect to ANY remote SVN repository. Note: Everything works correctly when I plug in my old Vista HD with Tortoise 1.6.6 client installed. Therefore, I do not suspect the network per se. I've seen some posts around with people running into similar issues on Windows 7 64bit but I've yet to see an actual answer/solution to the problem.

  Read the article

• Curiosity’s Official Self-Portrait

  - by Jason Fitzpatrick

  NASA has released a high-resolution self portrait of Curiosity. The photo, a composite of images snapped by the rover’s agile arm and MAHLI camera, shows Curiosity in front of Mount Sharp. From the NASA release: The mosaic shows the rover at “Rocknest,” the spot in Gale Crater where the mission’s first scoop sampling took place. Four scoop scars can be seen in the regolith in front of the rover. The base of Gale Crater’s 3-mile-high (5-kilometer) sedimentary mountain, Mount Sharp, rises on the right side of the frame. Mountains in the background to the left are the northern wall of Gale Crater. The Martian landscape appears inverted within the round, reflective ChemCam instrument at the top of the rover’s mast. Self-portraits like this one document the state of the rover and allow mission engineers to track changes over time, such as dust accumulation and wheel wear. Due to its location on the end of the robotic arm, only MAHLI (among the rover’s 17 cameras) is able to image some parts of the craft, including the port-side wheels. HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8 How To Play DVDs on Windows 8

  Read the article

• CodePlex Daily Summary for Monday, November 05, 2012

  CodePlex Daily Summary for Monday, November 05, 2012Popular ReleasesCatel ReSharper plugin: Catel.Resharper 1.3 RC 1: (+) Added support for R# 7.1 (+) Added support to Catel 3.4 for to convert auto properties into catel properties from ModelBase. (*) PropertyConverter now generates a the members name (property and notification method) to avoid the usage of existing member name. (x) Fixed reference to Actions.xml resource file.Dyanamic Reports (RDLC) - SharePoint 2010 Visual WebPart: Initial Release: This is a Initial Release.HTML Renderer: HTML Renderer 1.0.0.0 (3): Major performance improvement (http://theartofdev.wordpress.com/2012/10/25/how-i-optimized-html-renderer-and-fell-in-love-with-vs-profiler/) Minor fixes raised in issue tracker and discussions.ZXMAK2: Version 2.7.0.1: fix Spectrum+3 ULA timing if Direct3D is not available, draw warning on black background add Keyboard Help window fix kempston mouse (swap left/right buttons) add Pentagon 1024 memory module add shadow rom support for Pentagon 512/1024 fix to avoid NMI conflict between memory/BDI (Scorpion, Pentagon 512/1024) project structure and namespace refactoring NOTE: this version uses new device namespaces, so if you have VMZ file from previous version, please delete it!CodeGen Code Generator: CodeGen 4.2.2: IMPORTANT: This release replaces the previous 4.2.1 release from 28th October 2012, which has been removed. There was an error in the setup program for 4.2.1 which caused some dependent assemblies (for example the Synergy .NET runtime and other Synergy .NET assemblies) to be distributed as part of the CodeGen installation. This can cause problems when attempting to upgrade to later versions of Synergy. IT IS VERY IMPORTANT THAT ALL 4.2.1 INSTALLATIONS BE UNINSTALLED AND UPGRADED TO 4.2.2 AS ...ProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...Mouse Jiggler: MouseJiggle-1.3: This adds the much-requested minimize-to-tray feature to Mouse Jiggler.Piwik for Microsoft Silverlight Analytics Framework: WP7 and WP8: First release with basic Piwik support. Supported Systems: WP7 and WP8PCAPMerger: 2.1.0.0: Archive contains three folders: x86 - 32-bit version of application x64 - 64-bit version of application test - two testing PCAP files to be merged (both contain scrambled order of packets)Umbraco CMS: Umbraco 4.10.0 Release Candidate: This is a Release Candidate, which means that if we do not find any major issues in the next week, we will release this version as the final release of 4.10.0 on November 9th, 2012. The documentation for the MVC bits still lives in the Github version of the docs for now and will be updated on our.umbraco.org with the final release of 4.10.0. Browse the documentation here: https://github.com/umbraco/Umbraco4Docs/tree/4.8.0/Documentation/Reference/Mvc If you want to do only MVC then make sur...Skype Auto Recorder: SkypeAutoRecorder 1.3.4: New icon and images. Reworked settings window. Implemented high-quality sound encoding. Implemented a possibility to produce stereo records. Added buttons with system-wide hot keys for manual starting and canceling of recording. Added buttons for opening folder with records. Added Help button. Fixed an issue when recording is continuing after call end. Fixed an issue when recording doesn't start. Fixed several bugs and improved stability. Major refactoring and optimization...Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...AssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...DirectX Tool Kit: October 30, 2012 (add WP8 support): October 30, 2012 Added project files for Windows Phone 8MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...New Projects3dTalk: Web 2.0 site for 3d projection mapping artists, to have a forum for showing work, getting advice or comments, and giving details of forthcoming shows/exhibition8media: a student project for Windows 8ActiveWorlds Managed Wrapper: HeyAsyncLoggers: AsyncLoggers strives to provide high-quality asynchronous wrappers for all well-known logging frameworks.CapsBeep: CapsBeep is a Windows utility application that causes an audible beep and a notification to appear whenever a key is pressed while the Caps Lock is active.CUDA Tuning with CUDAfy: A step-by-step guide to tuning performance of a CUDA- and CUDAfy-enabled GPU algorithm, using a brute-force Travelling Salesman algorithm as example.DDarkSEngine: New 2D game engine for .netFoxyXLS: Visual FoxPro class to geneate pure XLS files using the BIFF3 file format.JsApi: The purpose of this project is to demonstrate aspects of both the DialectSoftware.Web.UI.CustomControls and the DialectSoftware.Web.JsAPI LF Spec: Add simple test extensions to your MS Test projects for BDD-style unit tests.Liubaobao Website Starter Kit: When it comes to developing a new website - big or small, we all need something to start with. We are putting together a bunch of frequently used system parts.metropress: A feature-rich and easy to customize framework for developer/designer who want to turn any wordpress site into Windows 8 AppMobile Device: Include this in your .NET applications to allow them to easily get information from a connected iDevice.Mouse Trapper: Mouse Trapper is a program that will keep your mouse pointer inside one display, unless the chosen key is being pressed.My WCF Project: Learning projectNetworkFileWatcher: Watch changes to Files and Folders on a remote computer using NetworkFileWatcher. Overcomes the network-path limitation of System.IO.FileSystemWatcher.Quentin: Blog de QuentinQuickbooks Repair Pro: QuickBooks Repair ProSAIN: SAIN es un sistema administrativo integral basado en web que permite la administración de pequeños negocios.SQLCE with Windows Phone 7.1: This project is create on Initial understanding of SQL CE with windows phone. You will get more useful code with this codeplex link in fututre. SSDD Campero: kikhjuiojolipompmlkmlkmTileTool: Work in progress 2D tile based editor.Time Limiter: Set of Windows services used to limit times per day and per session of computer users. Meant for child computer use control. C# WCF Windows Services WMI.Window Manager: Position windows easilyYet Another Regex Tester: Write a regular expression (regex) and test it on real text.

  Read the article

• SOA Galore: New Books for Technical Eyes Only

  - by Bob Rhubart

  In my part of the world the weather has taken its seasonal turn toward the kind of cold, damp, miserable stuff that offers a major motivation to stay indoors. While I plan on spending some of that indoor time working my way through the new 50th anniversary James Bond box set, I will also devote some time to improving my mind rather than my martini-mixing skills by catching up on my reading. If you're in a similar situation, you might want to spend some of your time  with these new technical books written by community members: Oracle SOA Suite 11g Administrator's Handbook by Ahmed Aboulnaga and Arun Pareek. Oracle BPM Suite 11g: Advanced BPMN Topics by Mark Nelson and Tanya Williams Oracle SOA Suite 11g Developer's Cookbook by Antony Reynolds and Matt Wright (Coming in December; available for pre-order).

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17  | Next Page >