Daily Archives

Articles indexed Monday October 21 2013

Page 16/18 | < Previous Page | 12 13 14 15 16 17 18  | Next Page >

  • Error from sudo update-grub

    - by Jim
    I've installed Ubuntu 13.10 on a Lenovo yoga 13. In order to make the backlight work with the keys I've been following some instructions here: How do I get the brightness control working on a Lenovo Yoga 13? The process asks me to run update-grub, but this causes the following error: /usr/sbin/grub-mkconfig: 27: /etc/default/grub: want: not found Which doesn't seem to come up hardly anywhere on Google - which is me pretty much stumped when it comes to grub!

    Read the article

  • Failing to install Ubuntu 13.04

    - by Kayven Riese
    I have a new Windows 8 Sony Vaio SVF14A15CXB laptop that has UEFI and I have been struggling through an Ubuntu installation. I have a bootable Ubuntu DVD+R and I have managed to mess with my BIOS/UEFI so that it boots. I have used Windows 8 to create a desired hard disk partition and installed Ubuntu there, and have burned a boot-repair http://sourceforge.net/p/boot-repair-cd/home/Home/ and rEFInd http://www.rodsbooks.com/refind/getting.html disk and neither will boot. I know I should continue googling and struggling, but I am getting frustrated. Thanks to anyone who gives me the time of day.

    Read the article

  • Ubuntu 12.04 lts cannot build a wireless connection

    - by Jupiterr
    Hi i just got a new notebook and it came with ubuntu 12.04 lts operation system. But it can't make a wireless connection. I plugged in my Ethernet cable and i can reach the Internet with it but I need wireless connection so much. This is the first time I'm using ubuntu so i'm really confused. I can see wireless networks (including mine) but i cannot use them. It seems like it's establishing a connection but soon it gives up. Please help, I don't have much time for this and I do not have any idea about operation systems.

    Read the article

  • Problems with brother printer drivers on 64bit 12.04

    - by Jeff Klein
    I'm running 12.04 64bit on a toshiba satellite laptop. I have a Brotrher MFC-J825dw printer. I've installed brothers driver for it and the cupswrapper but it won't print. I says it is receiving data but it never shows up in the queue. I've also tried the text only generic driver and the same thing happens. I think some dependencies are missing for the cups wrapper and when I try to find it it says it can't be installed. Nopt sure if that's the problem because it doesn't explain the generic driver failure. In any case, any ideas?

    Read the article

  • How do I totally disable all forms of session management in Xubuntu?

    - by Evan Carroll
    Xubuntu remembers things like xfce-terminal and chromium whenever my system starts up. I don't want that function to happen, ever. I want every restart to be fresh. How do I disable this functionality. I've seen numerous tutorials that unchecking the "Save sessions for future logins" screen in Log Off would work, but it does't seem to work for me. When the system comes back the other applications are open. I've also deleted the files in autostart, as per this question.

    Read the article

  • Shut down Netbook by closing lid - ubunti 13.10

    - by The Liquidator
    My wife has an Acer Aspire One (with the SSD Card and an SD expansion card). It has never been able to hibernate or suspend, always creating errors and occasionally trashing the data on the SD card, which is the home partition so it's unfortunate. To get around the problem I have set all exit methods to produce shutdown - she tends to simply shut the lid. I'm aware the default behaviour has for some time been to suspend, but I've got round that using the gnome tweak tool. However, I've just installed 13.10 and whilst I have installed the gnome tweak tool and set it to shut down the system appears to be ignoring/bypassing the setting, electing to suspend when the lid is shut. Can anyone tell me how to fix it please? I'm quite happy to get my hands dirty with the command line.

    Read the article

  • Wifi problems with Ubuntu 13.10

    - by Sparrowhawk4
    I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

    Read the article

  • ubuntu 13.10 secondary monitor - doesn't redraw properly

    - by Daniel
    Hi I've just installed Ubuntu 13.10 on a Lenovo w350 and am having some issues with graphics driver. standard nouveau drivers work great on the laptop display but when I attach an external display it goes bad on the external monitor, seems it's not re-drawing properly. (Photo attached). I've tried other drivers but none of them detect the external monitor when connected. Any ideas? 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1) screenshot of effected monitor -- http://i.imgur.com/UZWMpQO.jpg UPDATE 1: I have noticed that if I leave the System Monitor open the display improves. Wierd. UPDATE 2: If I leave a video going the lag/flicker issues stop.

    Read the article

  • Kernel freezes with nvidia optimus and bumblebee on 12.04

    - by piovisqui
    I have a Sony VAIO with Intel i7-3520M and NVIDIA Corporation GK107M [GeForce GT 640M LE]. I installed bumblebee and nvidia drivers. They work almost fine, but the system freezes like in a kernel panic once every day. I can play Dota 2 with primusrun on it with 20-30fps 1080p. But when I do something simple as expanding the KDE calendar widget from the bottom right corner, the system hangs a lot and windows borders get another border. The system freezes in not very intensive graphic tasks, for instance, ALT+TAB with KWin effects or pressing ALT+F2 for poping up the launcher. How can I solve this? Info: I use KDE. Couldn't paste de logs here, check at pastebin: http://pastebin.com/SBet8fRQ

    Read the article

  • Ubuntu 13.10 problems in apt-get update

    - by user205814
    I recently install Ubuntu 13.10, but I had several difficulties on installing several programs from 'Ubuntu Software Center'. I tried to update the repositories but I get the follow result (the * are mine since I cant put more than 2 links): Ign http*://security.ubuntu.com saucy-security InRelease Ign http*://extras.ubuntu.com saucy InRelease Hit http*://security.ubuntu.com saucy-security Release.gpg Hit http*://extras.ubuntu.com saucy Release.gpg Hit http*://security.ubuntu.com saucy-security Release Hit http*://extras.ubuntu.com saucy Release Hit http*://security.ubuntu.com saucy-security/main Sources Hit http*://extras.ubuntu.com saucy/main Sources Hit http*://security.ubuntu.com saucy-security/restricted Sources Hit http*://extras.ubuntu.com saucy/main amd64 Packages Hit http*://security.ubuntu.com saucy-security/universe Sources Hit http*://extras.ubuntu.com saucy/main i386 Packages Hit http*://security.ubuntu.com saucy-security/multiverse Sources Hit http*://security.ubuntu.com saucy-security/main amd64 Packages Hit http*://security.ubuntu.com saucy-security/restricted amd64 Packages Hit http*://security.ubuntu.com saucy-security/universe amd64 Packages Hit http*://security.ubuntu.com saucy-security/multiverse amd64 Packages Hit http*://security.ubuntu.com saucy-security/main i386 Packages Hit http*://security.ubuntu.com saucy-security/restricted i386 Packages Hit http*://security.ubuntu.com saucy-security/universe i386 Packages Hit http*://security.ubuntu.com saucy-security/multiverse i386 Packages Ign http*://extras.ubuntu.com saucy/main Translation-en_US Ign http*://extras.ubuntu.com saucy/main Translation-en Hit http*://security.ubuntu.com saucy-security/main Translation-en Hit http*://security.ubuntu.com saucy-security/multiverse Translation-en Hit http*://security.ubuntu.com saucy-security/restricted Translation-en Hit http*://security.ubuntu.com saucy-security/universe Translation-en Ign http*://security.ubuntu.com saucy-security/main Translation-en_US Ign http*://security.ubuntu.com saucy-security/multiverse Translation-en_US Ign http*://security.ubuntu.com saucy-security/restricted Translation-en_US Ign http*://security.ubuntu.com saucy-security/universe Translation-en_US Err http*://us.archive.ubuntu.com saucy InRelease Err http*://us.archive.ubuntu.com saucy-updates InRelease Err http*://us.archive.ubuntu.com saucy-backports InRelease Err http*://us.archive.ubuntu.com saucy Release.gpg Cannot initiate the connection to us.archive.ubuntu.com:80 (2001:67c:1562::14). - connect (101: Network is unreachable) [IP: 2001:67c:1562::14 80] Err http*://us.archive.ubuntu.com saucy-updates Release.gpg Cannot initiate the connection to us.archive.ubuntu.com:80 (2001:67c:1562::14). - connect (101: Network is unreachable) [IP: 2001:67c:1562::14 80] Err http*://us.archive.ubuntu.com saucy-backports Release.gpg Cannot initiate the connection to us.archive.ubuntu.com:80 (2001:67c:1562::14). - connect (101: Network is unreachable) [IP: 2001:67c:1562::14 80] Reading package lists... Done W: Failed to fetch http*://us.archive.ubuntu.com/ubuntu/dists/saucy/InRelease W: Failed to fetch http*://us.archive.ubuntu.com/ubuntu/dists/saucy-updates/InRelease W: Failed to fetch http*://us.archive.ubuntu.com/ubuntu/dists/saucy-backports/InRelease W: Failed to fetch http*://us.archive.ubuntu.com/ubuntu/dists/saucy/Release.gpg Cannot initiate the connection to us.archive.ubuntu.com:80 (2001:67c:1562::14). - connect (101: Network is unreachable) [IP: 2001:67c:1562::14 80] W: Failed to fetch http*://us.archive.ubuntu.com/ubuntu/dists/saucy-updates/Release.gpg Cannot initiate the connection to us.archive.ubuntu.com:80 (2001:67c:1562::14). - connect (101: Network is unreachable) [IP: 2001:67c:1562::14 80] W: Failed to fetch http*://us.archive.ubuntu.com/ubuntu/dists/saucy-backports/Release.gpg Cannot initiate the connection to us.archive.ubuntu.com:80 (2001:67c:1562::14). - connect (101: Network is unreachable) [IP: 2001:67c:1562::14 80] W: Some index files failed to download. They have been ignored, or old ones used instead. I want to install Seaview, Dropbox, Terminator and the IDLE of python 2.7, but I can't since I get 'There isn’t a software package called “” in your current software sources' or 'Available from the "multiverse" source. However, for this last one, when I do click over "Use this Source" nothing happens. I need help. Tx to all.

    Read the article

  • Messed up installation of mysql-server - cannot complete installation or deinstallation

    - by Christian Engel
    apt-get got stuck while installing mysql-server. I don't know why but it just stopped working and never continued. I had to reboot the machine in the middle of the setup process. Now, if I try to install or purge the mysql-server package, apt-get tries to configure mysql-server first (tells me its not installed before that) and cancels with a error message: Sub-process /usr/bin/dpkg returned an error code(1) apt-get also tells me that two packages have not been successfully installed or removed. this is the complete console output: christian@devbox:~$ sudo apt-get install mysql-server [sudo] password for christian: Reading package lists... Done Building dependency tree Reading state information... Done mysql-server is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 17 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up mysql-server-5.5 (5.5.32-0ubuntu7) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) christian@devbox:~$

    Read the article

  • Nautilus doesn't allow adding/removing bookmarks

    - by Isaac Dontje Lindell
    I just did a fresh install of Ubuntu 13.10 (actually, I've done two fresh installs, hoping that trying again would get this working). I don't seem to have the ability to add or remove bookmarks from Nautilus. The ones that are there by default (Home, Desktop, Documents, etc.) work fine. I can right click on them and rename them. However, I cannot remove any of them. The option is there "Remove" but disabled/grayed out. The same is true if I try to add bookmarks. I go to "Files - Bookmarks", and all the bookmarks show up, but the buttons at the bottom to add, remove, or re-order the bookmarks are simply disabled. What am I doing wrong?

    Read the article

  • Restoring android after ubuntu touch fails

    - by deimus
    I'm trying to restore android after playing around with ubuntu touch I follow exactly the same steps described the ubuntu's wiki page i.e. Download the factory image corresponding to your device's model and version (initial table has links). Ensure the device is connected and powered on. Extract the downloaded file and cd into the extracted directory. run adb reboot-bootloader run ./flash-all.sh (use sudo if lack of permissions on the workstation don't allow you to talk to the device). The archive is downloaded successfully, checked the sha1 checksum everything is ok. But the ./flash-all.sh fails like this sending 'bootloader' (2308 KB)... OKAY [ 0.513s] writing 'bootloader'... OKAY [ 0.292s] finished. total time: 0.805s rebooting into bootloader... OKAY [ 0.007s] finished. total time: 0.008s sending 'radio' (12288 KB)... OKAY [ 2.668s] writing 'radio'... OKAY [ 1.372s] finished. total time: 4.040s rebooting into bootloader... OKAY [ 0.009s] finished. total time: 0.009s archive does not contain 'boot.sig' archive does not contain 'recovery.sig' failed to allocate 435793780 bytes error: update package missing system.img My device is Nexus 4. Tried both 4.2.2 and 4.3 androind versions for Nexus 4 still the same. Any ideas how problem can be solved ?

    Read the article

  • permanently disable bluetooth

    - by NotABluetoothUser
    I simply don't use bluetooth. Since it can be a security risk and also drains the battery I would like to keep it deactivated. I quickly found the option to turn it off in the settings menu, but the problem is: it doesn't stay dead! Everytime I pull my Nexus 4 out of standby mode bluetooth reappears in the top bar as if I never deactivated it. How can I deactivate it so it stays deactivated or better yet how can I remove it from my phone entirely? I tried sudo apt-get remove bluez bluetooth, but I am not allowed to edit this package.

    Read the article

  • Slow wifi after upgrading kubuntu 13.04 to 13.10

    - by RedCow22
    After upgrading from kubuntu 13.04 to 13.10 suddenly my wifi connection is very slow. Ping times are varying from 200 up to 1500 ms to www.google.nl. When I connect my ethernet cable they drop to normal times like 8 or 9 ms. Anyone experiencing the same problem or know a solution I can try? During the upgrade process a few times they asked whether I wanted to keep or replace some kind of configuration file. I'm not sure anymore which file it was, but maybe this has something to do with it. Before the upgrade both wired and wireless connection worked perfect.

    Read the article

  • PCSX2 1.0.0 installation issues

    - by user205261
    I've followed all the tutorials I can find to get this emulator to work and I'm now getting this error. Granted I've gotten a lot further than when I started. Running 13.10. Just downloaded the Linux download file from the pcsx2 website and did the following in terminal: jonathan@Assassin:~$ sudo add-apt-repository ppa:gregory-hainaut/pcsx2.official.ppa [sudo] password for jonathan: The Official pcsx2 ppa, provided by the pcsx2 team. This ppa contains a regular package snapshot of pcsx2. We are not package experts, but we try to follow the debian policy. Press [ENTER] to continue or ctrl-c to cancel adding it gpg: keyring `/tmp/tmpe5fwdz/secring.gpg' created gpg: keyring `/tmp/tmpe5fwdz/pubring.gpg' created gpg: requesting key 7A617FF4 from hkp server keyserver.ubuntu.com gpg: /tmp/tmpe5fwdz/trustdb.gpg: trustdb created gpg: key 7A617FF4: public key "Launchpad official ppa for pcsx2 team" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) OK jonathan@Assassin:~$ sudo apt-get update Err http://ppa.launchpad.net saucy/main amd64 Packages 404 Not Found Err http://ppa.launchpad.net saucy/main i386 Packages 404 Not Found Fetched 67.4 kB in 16s (3,977 B/s) W: Failed to fetch ppa.launchpad.net/gregory-hainaut/pcsx2.official.ppa/ubuntu/dists/saucy/main/binary-amd64/Packages 404 Not Found W: Failed to fetch ppa.launchpad.net/gregory-hainaut/pcsx2.official.ppa/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. jonathan@Assassin:~$ sudo apt-get install pcsx2 Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package pcsx2 So I'm assuming I just need the way to get the two missing packages?

    Read the article

  • How do I fix a corrupted harddrive after failed upgrade?

    - by Nil
    The problem originated when I was trying to fix this problem. Things went horribly, horribly wrong and I ended up with a new problem altogether. The last thing I did was run sudo apt-get install and that caused my system to freeze. I restarted my computer and it would not boot from the harddrive. I ran a copy of Ubuntu 12.10 from a flashdrive that I had and ran gparted to see if my partitions were all there. It returned this message: Invalid partition table on /dev/sda -- wrong signature 5208. The drive appeared as a 2TiB unallocated drive with an error. The drive had 4 partitions before (plus random unallocated space). There was a fat32 partition, an ext4 partition which contained ubuntu 13.04/13.10 (I don't even know which one at this point), an extended partition which contained a swap partition for my ubuntu partition (I was meaning to move that ubuntu partition into the extended partition, never got around to it), and another partition (I don't remember how I formatted it). I should also mention this is a 1TB harddrive. So in short, I have a corrupted partition table on my primary harddrive from which I boot from, how can I fix this? I tried mounting the drive with sudo mount /dev/sda1 /media/ubuntu then I changed my directory to said folder and tried to list files and this monstrosity happened: $ ls ls: cannot access ??w?j^?.: Input/output error ls: cannot access ??(? ?x?.|: Input/output error ls: cannot access 6W_@?)?._??: Input/output error ls: cannot access HB0v???.A}?: Input/output error ls: cannot access ???.?X: Input/output error ls: cannot access t)?.+?l: Input/output error ls: cannot access ?h@ ?.@ : Input/output error ls: cannot access >? @??.???: Input/output error ls: cannot access m???.??: Input/output error ls: cannot access @ if??a?: Input/output error ls: cannot access ?M!vN$?.??n: Input/output error ls: cannot access ?o? ??.Bm`: Input/output error ls: cannot access ?:I??? M. : Input/output error ls: cannot access W??.??: Input/output error ls: cannot access ?: Input/output error ls: cannot access ?W?s??: Input/output error ls: cannot access ?v?k?.???: Input/output error ls: cannot access 5?$<N??: Input/output error .x????.??i: Input/output error ls: cannot access je????.j?1: Input/output error XjD?.???: Input/output error ls: cannot access W??n???.?: Input/output error ls: cannot access ?^x.$"?: Input/output error ls: cannot access !??*!??j.??: Input/output error ls: cannot access '-??k?^?.???: Input/output error ls: cannot access b?w?w?b.\??: Input/output error ls: cannot access o????"z.??B: Input/output error ls: cannot access ??b?h.?3-: Input/output error ls: cannot access ??.$7: Input/output error ls: cannot access )??K.bk: Input/output error ls: cannot access s??z?.?(?: Input/output error ls: cannot access ?F@?0?.@?: Input/output error .?D: Input/output error .??: Input/output error ls: cannot access?????. @: Input/output error ls: cannot access ?/?? ?.??: No such file or directory ls: cannot access rk?p4q(?.?k: Input/output error This looks promising. This is the output of fdisk -l $ sudo fdisk -l /dev/sda Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x5208 of partition table 5 will be corrected by w(rite) Disk /dev/sda: 2199.0 GB, 2199023132672 bytes 255 heads, 63 sectors/track, 267349 cylinders, total 4294967056 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x44fdfe06 Device Boot Start End Blocks Id System /dev/sda1 113305600 894715903 390705152 c W95 FAT32 (LBA) /dev/sda2 894715904 1489307647 297295872 83 Linux /dev/sda3 1489309694 1497307135 3998721 5 Extended /dev/sda4 1497309184 1953523711 228107264 7 HPFS/NTFS/exFAT /dev/sda5 ? 3013257822 3688738171 337740175 aa Unknown

    Read the article

  • Possible to use screen lock as timeout? [duplicate]

    - by Alex
    This question already has an answer here: Any app that tells me to take regular breaks from working? 3 answers What I'd like to do is lock the screen and have it wait a set amount of time (eg 20 mins) before it lets me log back in - so I make myself to have a break from the computer. Is it possible to do this? Thanks EDIT: Thanks for the suggestions - but I don't actually want something to remind me to take scheduled breaks. More something I can click when I realise I'm getting distracted and it'll immediately lock the screen for a fixed amount of time. Or even just lock screen if I can find a way to stop it letting me log in for 20 mins or so.

    Read the article

  • How do I get the brightness control working on a Lenovo Yoga 13?

    - by Viktor Ax
    Brightness control doesn't work by default in Ubuntu 13.04. Solution for 12.10 doesn't work, also as this Any idea how to fix it? Update: After research I found how to change brightness manually. What need to do is to type in terminal: echo 2000 | sudo tee /sys/class/backlight/intel_backlight/brightness It will reduce brightness by half, but still would be good to find solution which will allow to use keyboard for changing brightness. Update2: Found solution, see below

    Read the article

  • Ubuntu 12.04.2 won't boot after bumblebee instalation

    - by Andrej
    First of all sorry for my English, it's not my first language. Here is what I have done: I had a working ubuntu 12.04 with all updates and working bumblebee, so I could do optirun command and battery life was better than without bumblebee. Than I decided to reinstall both my systems installed windows 7 and ubuntu. Reinstalled Windows 7 all working as expected, than on other partition installed ubuntu 12.04. All worked perfectly. Than I installed bumblebee according to the procedure written here https://wiki.ubuntu.com/Bumblebee same steps that I used before. But now after I install drivers and do all written in procedure and I reboot my notebook system won't boot, it is simply stuck at black screen after short showing of start screen. I reinstalled ubuntu many times already and tried everthing, but when I try install nvidia drivers it won't boot after shutting down notebook and only thing I can do is reinstalling system. I have Lenovo Thinkpad Edge E530 and processor: Intel® Core™ i5-3210M CPU and graphic cards are Intel HD 4000 and Nvidia geforce gt630m After clean install without bumblebee, terminal command lspci| grep VGA is showing: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) Can you suggest a sollution?? Or at least some links to similar topics??

    Read the article

  • Need to run a .sh as root on boot or login

    - by Graymayre
    Still new with linux and running ubuntu 12.10 I have a wireless stick (ae2500) which has known issues that has been partially solved using ndiswrapper. However, to use it I must run the same scripts every time I reboot, effectively uninstalling and reinstalling the driver. I made a .sh file to run every time to make it easy, but I must do the sudo login everytime. There are three solutions I am looking for and although not all are necessary to solve this particular problem, I would still like to know them all for learning purposes. run scripts or file.sh on boot (as well as other programs) run scripts or file.sh automatically with root privileges make the install permanent so as not to have to go through the process every time. Any additional information that can help me regarding this that I did not think to ask (including streamlining my commands), or general knowledge, would be greatly appreciated. Following are the contents of the file. I pretty much just made it as I would have entered it. cd ~/ndiswrapper-1.58rc1 sudo modprobe -rf ndiswrapper sudo rm /etc/modprobe.d/ndiswrapper.conf sudo rm -r /etc/ndiswrapper/* sudo depmod -a sudo make uninstall sudo make sudo make install sudo ndiswrapper -i bcmwlhigh5.inf ndiswrapper -l sudo modprobe ndiswrapper

    Read the article

  • Can't print on my brand new Canon Pixma MP495

    - by Jean Ludovic Vandal
    I just purchased a Canon Pixma MP495. It was working perfect, except for the scanner. It won't install the driver for the scanner. Anyway, I was printing using the new printer. After a while, it started saying that the printing job was sent to the printer and then that the print job was completed. But, nothing came out of the printer. I uninstalled the driver and installed it over again. Nothing. Can somebody help me out. Can't work without a printer. Thanks in advance.

    Read the article

  • Keyboard freezes / stuck if a key pressed repeatedly

    - by Aziz Rahmad
    I use Acer 4530. This problem has happened long since Ubuntu 10.10 and now that I use 11.04 dual booted with Linux Mint 10. Everytime I press one key repeatedly, like when I read a long article in a website/ebook or when I play games which required me to press arrow keys repeatedly, it would randomly freeze. That is, whatever I press on keyboard has no effect, and that also happens with touchpad. However, the USB mouse works just fine. I later found out that it's not actually freeze but more like it's like the key stuck. For example when I play tetris which I usually press w (down) button repeatedly, after some times it would freeze. And if I put the cursor in, say, browser's address bar, it would type "wwww....." infinitely. The only way I could fix it is by suspend the laptop, either by using mouse or by closing the lid. And instead of suspended, in that case the laptop would automatically wake up and everything will be fine. (Usually my laptop would wake up after suspended by pressing any key) It has happened since the first time I use Ubuntu, 10.10, and it also happens in Linux Mint 10, and until now in Ubuntu 11.04. It never happened when I use Windows, though. Anyone has ever encounter similar problem? Anyone know how to fix it permanently? UPDATE I just recently installed Windows 7 and Windows 8 Development Preview and both have similar symptoms. So I declare that this problem is not OS specific, probably hardware problem.

    Read the article

  • Average SPA weight [on hold]

    - by Emmanuel Istace
    First, sorry my noobs questions, but I'm mainly Windows Developer and not Web Developer :) I'm developing a single page application with a lot of css & javascript. For now the page is 1.3Mo composed by 5 section. Here are the rounded stats : Document : 10kb Style : 60kb Images : 450 kb (already compressed, include a big gallery thumbnails) Javascript : 700kb - 600kb of "framework" (jquery, jquery-ui, boostrap, modernizer, waypoint, ...) and 100kb of custom js. Fonts : 125kb And the site is not finished yet. (Will include gmap api, and some others...) My questions are : Do you have any statistics about the average weight of an SPA ? As this is the whole website, do you think it's acceptable ? Is lazy load (for images) a solution ? What will be impact for SEO ? Is the "200kb rule" of google still relevant ? Do you know great tools to detect which javascript code is not used during the the exection of a page and then the availability to optimize these 700kb of framework js stuffs ? Can a caching strategy be an answer ? Thank you in advance for you help ! Best regards

    Read the article

  • Does Google sometime prevent new white hat sites from ranking at all in some verticals?

    - by JVerstry
    Assuming someone wants to implement a new viagra or akai berry e-commerce website. There is a lot of competition and this site does not really bring something new, other than a new online counter to buy products at a nice price. Assuming this site does not use any black hat techniques and that it stays with Google quality guidelines, and assuming it has no (or few) backlinks (from non-authoritative websites). Assuming this website's pages are indexed properly in Webmaster Tool, and that no penalties are reported. No site improvements are suggested. Google crawls the site daily as reported in GWT. No robots.txt configuration issues. Does Google sometime decide to no rank this site for any user query (for weeks), because of lack of original content? The reason I am asking this is that I am trying to understand the possible cause of a similar situation I am observing with two sites. If so, what is the way out to start ranking for these site? If not, does it mean the cause is elsewhere for sure? Any confirmed info to get out of the maze is welcome.

    Read the article

< Previous Page | 12 13 14 15 16 17 18  | Next Page >