Daily Archives

Articles indexed Tuesday August 28 2012

Page 17/19 | < Previous Page | 13 14 15 16 17 18 19  | Next Page >

  • What encryption algorithm/package should I use in a betting game type situation?

    - by user299648
    I have a betting type site where I publish a number (between 0-100) that is encrypted. Then after a period of time, I would review what the number is and prove it with a key to decrypt the encrypted number to prove that I'm not cheating. I also want it to be easily verifiable by an average user. What encryption algorithm/technique/package should I use? I'm no expert on cryptography. There seems to be so many options out there and I'm not sure what to use. python friendly is a plus.

    Read the article

  • How do you name your personal libraries?

    - by Mehrdad
    I'm pretty bad with naming things. The only name I can every generically come up with is 'helper'. Say, if I have a header file that contains helping functions for manipulating paths, I tend to put it inside my "helper" directory and call it "path-helper.hpp" or something like that. Obviouslly, that's a bad naming convention. :) I want to have a consistent naming scheme for my folder (and namespace) which I can use to always refer to my own headers and libraries, but I have trouble finding names that are easy to type or remember (like boost)... so I end up calling some of them "helper" or "stdext" or whatnot, which isn't a great idea. How do you find names for your libraries that are easy to remember and easy to type, and which aren't too generic (like "helper" or "std" or "stdext" or the like)? Any suggestions on how to go about doing this?

    Read the article

  • Why is Clean Code suggesting avoiding protected variables?

    - by Matsemann
    Clean Code suggests avoiding protected variables in the "Vertical Distance" section of the "Formatting" chapter: Concepts that are closely related should be kept vertically close to each other. Clearly this rule doesn't work for concepts that belong in separate files. But then closely related concepts should not be separated into different files unless you have a very good reason. Indeed, this is one of the reasons that protected variables should be avoided. What is the reasoning?

    Read the article

  • When should code favour optimization over readability and ease-of-use?

    - by jmlane
    I am in the process of designing a small library, where one of my design goals is that the API should be as close to the domain language as possible. While working on the design, I've noticed that there are some cases in the code where a more intuitive, readable attribute/method call requires some functionally unnecessary encapsulation. Since the final product will not necessarily require high performance, I am unconcerned about making the decision to favour ease-of-use in my current project over the most efficient implementation of the code in question. I know not to assume readability and ease-of-use are paramount in all expected use-cases, such as when performance is required. I would like to know if there are more general reasons that argue for a design preferring more efficient implementations—even if only marginally so?

    Read the article

  • Best way of accessing data on different pages

    - by Gaz83
    I'm looking for a way to load data into properties/variables etc and have this information accessible to all the pages of my app. I want the information to be loaded via a background thread to keep UI thread free. Some of the pages will have various properties of their controls binding to these global properties. Here is what I tried. Created a static class. All pages could access the data but can't bind. Changed the static class to a Singleton and used DependencyProperty's. All pages could access data and binding worked fine but cross-threading issues when accessing via background threads. I have read in various places on this subject but haven't really come up with the best method yet for my situation.

    Read the article

  • What is the value in hiding the details through abstractions? Isn't there value in transparency?

    - by user606723
    Background I am not a big fan of abstraction. I will admit that one can benefit from adaptability, portability and re-usability of interfaces etc. There is real benefit there, and I don't wish to question that, so let's ignore it. There is the other major "benefit" of abstraction, which is to hide implementation logic and details from users of this abstraction. The argument is that you don't need to know the details, and that one should concentrate on their own logic at this point. Makes sense in theory. However, whenever I've been maintaining large enterprise applications, I always need to know more details. It becomes a huge hassle digging deeper and deeper into the abstraction at every turn just to find out exactly what something does; i.e. having to do "open declaration" about 12 times before finding the stored procedure used. This 'hide the details' mentality seems to just get in the way. I'm always wishing for more transparent interfaces and less abstraction. I can read high level source code and know what it does, but I'll never know how it does it, when how it does it, is what I really need to know. What's going on here? Has every system I've ever worked on just been badly designed (from this perspective at least)? My philosophy When I develop software, I feel like I try to follow a philosophy I feel is closely related to the ArchLinux philosophy: Arch Linux retains the inherent complexities of a GNU/Linux system, while keeping them well organized and transparent. Arch Linux developers and users believe that trying to hide the complexities of a system actually results in an even more complex system, and is therefore to be avoided. And therefore, I never try to hide complexity of my software behind abstraction layers. I try to abuse abstraction, not become a slave to it. Question at heart Is there real value in hiding the details? Aren't we sacrificing transparency? Isn't this transparency valuable?

    Read the article

  • Were the first assemblers written in machine code?

    - by The111
    I am reading the book The Elements of Computing Systems: Building a Modern Computer from First Principles, which contains projects encompassing the build of a computer from boolean gates all the way to high level applications (in that order). The current project I'm working on is writing an assembler using a high level language of my choice, to translate from Hack assembly code to Hack machine code (Hack is the name of the hardware platform built in the previous chapters). Although the hardware has all been built in a simulator, I have tried to pretend that I am really constructing each level using only the tools available to me at that point in the real process. That said, it got me thinking. Using a high level language to write my assembler is certainly convenient, but for the very first assembler ever written (i.e. in history), wouldn't it need to be written in machine code, since that's all that existed at the time? And a correlated question... how about today? If a brand new CPU architecture comes out, with a brand new instruction set, and a brand new assembly syntax, how would the assembler be constructed? I'm assuming you could still use an existing high level language to generate binaries for the assembler program, since if you know the syntax of both the assembly and machine languages for your new platform, then the task of writing the assembler is really just a text analysis task and is not inherently related to that platform (i.e. needing to be written in that platform's machine language)... which is the very reason I am able to "cheat" while writing my Hack assembler in 2012, and use some preexisting high level language to help me out.

    Read the article

  • How to train yourself to avoid writing “clever” code?

    - by Dan Abramov
    Do you know that feeling when you just need to show off that new trick with Expressions or generalize three different procedures? This does not have to be on Architecture Astronaut scale and in fact may be helpful but I can't help but notice someone else would implement the same class or package in a more clear, straightforward (and sometimes boring) manner. I noticed I often design programs by oversolving the problem, sometimes deliberately and sometimes out of boredom. In either case, I usually honestly believe my solution is crystal clear and elegant, until I see evidence to the contrary but it's usually too late. There is also a part of me that prefers undocumented assumptions to code duplication, and cleverness to simplicity. What can I do to resist the urge to write “cleverish” code and when should the bell ring that I am Doing It Wrong? The problem is getting even more pushing as I'm now working with a team of experienced developers, and sometimes my attempts at writing smart code seem foolish even to myself after time dispels the illusion of elegance.

    Read the article

  • Upgrade to 11.10 left me with Kmail not working

    - by user86186
    On my way from 10.10 to 12.04 I chose to do the step by step (11.04 then 11.10 then 12.04) because I could not figure if I should do that or a direct install of 12.04LTS. After the first step (11.04) all was well. The next day I upgraded to 11.10. Now I seem to have lost my data in KOrganizer and all of my email history in KMail. KMail still has my email accounts but my tree structure of folders is missing as is all of the emails that should be there. Also, when KMail opens I get the following: KMail encountered a fatal error and will terminate now. The error was: Failed to fetch the resource collection. Clicking OK closes KMail. KAlarm appears OK and my browser history is still in place as are various data files. What to do??

    Read the article

  • Can't use ubuntu 12.04 , after pc crashed while updating

    - by ilias
    few days ago while ubuntu 12.04 was doing a common system uodate , my laptop turned off in the middle of process , due to bad ac power. Since then , i can only login but nothing else. A message about compiz appear , but mouse keyboard , icons , unity are not working. the only thing i was able to do is a boot-repear ,as discribed in ubuntu's site, but neither this helped. Hope you can help me. thanks!

    Read the article

  • 12.04 Black screen with blinking cursor

    - by Junaid
    I have read this post My computer boots to a black screen, what options do I have to fix it? UBUNTU 12.04 works well with livecd but fails to start after complete installation, black screen with a blinking cursor. I tried holding shift key and edit grub options but holding shift did not do anything. I give up, any suggestion. I have built in intel graphics card and an nvidia card in PCI. I have tried by removing nvidia card as well. All I see is a black screen with a blinking cursor. My system is Dell optiplex GX260 with 1GB ram and 2.4 GHz P4 processor

    Read the article

  • Fail to download repository information

    - by BRvitorio
    Why lately I've been getting this error when I try to update my computer? Ubuntu 12.04 Kernel 3.5.2 Processor i386 W:Failed to fetch http://ppa.launchpad.net/kernel-ppa/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found, W:Failed to fetch http://ppa.launchpad.net/kernel-ppa/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found, E:Some index files failed to download. They have been ignored, or old ones used instead.

    Read the article

  • Couldn't find package - But package is listed in the Packages file

    - by Chris
    (Quoted items are redacted elements) I am using a private repository and an currently trying to repackage some packages 3rd-party packages. I extract the package, make a few modifications (just the control files to fit with company policy - though sometimes file install locations though not in this case) and repackage (and usually rename). Normally I copy the files into a new blank debhelper project and reconstruct the package, however, with a recent one I attempting to convert and some libraries and stuff aren't linking properly (I did copy the postinst, postrm, and preinst files along with all DEDIAN files exactly), the original package worked, but my repackage doesn't, despite providing the same files in the same locations and the same postinst and preinst. So I was attempting to just modify the current packages control files (as the original package is not very good and will not list in our repository and getting a better one from the 3rd party is not an option). I also renamed the package. I did the following: dpkg-deb -R "directory" Modify DEBIAN/control dpkg-deb -b "directory" "package name I want" I did this and put it in our repository. The package shows up in the "Packages" file on the repository and running apt-get update on the client side shows the package in: /var/lib/apt/lists/"server"_"location"_Packages However when I do an apt-get install on the package name (as listed in the Packages file - I did a copy paste) it says it can't find the package. Same with an apt-cache search The Packages listings is as follow (name redacted): Package: "package name" Priority: extra Section: unknown Maintainer: "maintainer" Architecture: any Version: 1.0-lucid5 Depends: libc Filename: "directory"/"package_filename" Size: 2206292 MD5sum: "md5sum" SHA1: "sha key" SHA256: "sha256 key" Description: "description" I am running as sudo (and tried as root as well). I don't understand why apt-get won't see the package. Can you point out any flaws in what I have done, or perhaps some help on getting apt-get to properly see the package. Or perhaps an alternative. I am not even sure if this is a valid way to repackage something. Thanks.

    Read the article

  • New 12.04.1 ISO filename

    - by Ubuntu user X
    I use a program called YUMI from pendrivelinux.com to load all my Linux distros from a USB thumbdrive. They just updated their installer to support the newest 12.04.1 released a couple days ago. It's looking for a ISO name of ubuntu-12.04.*dvd-i386.iso but the file I downloaded from the Ubuntu homepage is named ubuntu-12.04.1-desktop-i386.iso. Can I simply change the name of my ISO, or is there a difference in the ISO?

    Read the article

  • emacs keybindings in ubuntu 12.04

    - by sam
    I am trying to get emacs-like keybindings in gtk, firefox, chrome, etc. I have followed the directions recommended here (and in lots of places) but to no effect: http://kb.mozillazine.org/Emacs_Keybindings_(Firefox) In other words, I added 'gtk-key-theme-name = "Emacs"' to my .gtkrc-2.0, and I also ran gconf-editor and set "/desktop/gnome/interface/gtk_key_theme" to "Emacs". I even rebooted just for good measure. I am using an ordinary Ubuntu 12.04 install, with unity3d as the desktop environment. Thanks! Sam

    Read the article

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

  • Why do this PDF's fonts appear unreadable on my machine?

    - by Matthew
    I'm trying to read The Art of Assembly Language as per this answer on Stack Overflow. When I open it on my Ubuntu 12.04 box, it looks like this: I haven't tested it on another machine, but this can't be intentional. What is going on, and how can I fix it? Edit: The above screenshot is from Chrome. It look like this in Evince: Still squished and hardly readable, but better. Is there anything I can do to fix it?

    Read the article

  • Cannot use second display with 12.04 and Intel 2000/3000

    - by Carolyn Marenger
    I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

    Read the article

  • How to make "xrandr" work with GMA500?

    - by Nwbie
    Is it error at driver of graphic chip or Xorg or kernel? I am Asus T91mt with GMA500, Ubuntu 12.04.1. I would like too see only a notice of connection at least. A log of xrandr: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation System Corporation System Controller Hub (SCH Poulcbo) Graphics Controller (rev 07) vp@vc:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 (0x138) normal (normal) 0mm x 0mm Identifier: 0x137 Timestamp: 26863 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1024x600 (0x138) 0.0MHz *current h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz v: height 600 start 0 end 0 total 600 clock 0.0Hz vp@vc:~$ xrandr --prop xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 0mm x 0mm 1024x600 0.0* vp@vc:~$ Please help, i am linux newbie and i am tired ;/

    Read the article

  • How can I add a custom item to the Sound Indicator?

    - by con-f-use
    One of the strength of Unity are the various standardized indicators. I want to customize the sound indicator with an additional menu entry that runs a small shell script. I'm not afraid of a little Python code and I hope someone can point me to the right subroutine in the right file. I suspect that will be fairly easy but all the indicators are just so bloated that I can't look through their code in a reasonable time. Any help is appreciated. I know it is possible as the marvelous Skype-Wrapper does it.

    Read the article

  • What is the correct way to use g_signal_connect() in C++ for dynamic unity quicklists?

    - by hakermania
    I want to make my application use dynamic unity quicklists. For building my application I am using C++ and the QtCreator IDE. When a menu action is triggered I want to be able to have access to a non-static function of my MainWindow class so as to be able to update the Graphical User Interface which can be accessed from inside 'normal' MainWindow's functions. So, I am building up my quicklist like this (mainwindow.cpp): void MainWindow::enable_unity_quicklist(){ Unity_Menu = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set_bool (Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, FALSE); Unity_Stop = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set(Unity_Stop, DBUSMENU_MENUITEM_PROP_LABEL, "Stop"); dbusmenu_menuitem_child_append (Unity_Menu, Unity_Stop); g_signal_connect (Unity_Stop, DBUSMENU_MENUITEM_SIGNAL_ITEM_ACTIVATED, G_CALLBACK(&fake_callback), (gpointer)this); if(!unity_entry) unity_entry = unity_launcher_entry_get_for_desktop_id("myapp.desktop"); unity_launcher_entry_set_quicklist(unity_entry, Unity_Menu); dbusmenu_menuitem_property_set_bool(Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, true); dbusmenu_menuitem_property_set_bool(Unity_Stop, DBUSMENU_MENUITEM_PROP_VISIBLE, true); } void MainWindow::fake_callback(gpointer data){ MainWindow* m = (MainWindow*)data; m->on_stopButton_clicked(); } void MainWindow::on_stopButton_clicked(){ //stopping the process... } mainwindow.h: private slots: void enable_unity_quicklist(); void on_stopButton_clicked(); public slots: static void fake_callback(gpointer data); This suggestion was taken from http://old.nabble.com/Using-g_signal_connect-in-class-td18461823.html The program crashes immediately after I choose the 'Stop' action from the Unity Quicklist. Debugging the program shows that I am not able to access anything MainWindow related inside the on_stopButton_clicked() without crashing. For example, it crashes when doing this check (which is the first 2 lines of code inside this function): if (!ui->stopButton->isEnabled()) return; I have also tested lots of other things that I found at the internet, but nothing of them worked. One interesting solution would be to use gtkmm (http://developer.gnome.org/gtkmm-tutorial/stable/sec-connecting-signal-handlers.html.en) but I am not used at all working on GTK applications (I work solely in Qt) and I don't know if this even suits to my occasion. A compilable example indicating what the problem is can be found at: http://ubuntuone.com/7iKA3wnPmWVp8YNNDLlVQI (3.2Kb) If you are not familiar with the QtCreator IDE, you can compile with the following commands, as long as you have all the needed libraries: cd dynamic_unity_quicklists_test; qmake -project; qmake; make

    Read the article

  • After upgrading to 12.04 the scanner from Brother Printer MFC-290C does not work

    - by Lorenzo
    I upgraded Ubuntu to 12.04 from 11.10. The printer works, but the scanner doesn't now. In 11.10 I had to install a special driver from Brother. The printer's model is Brother MFC-290C. The computer is a Toshiba Satellite. How can I get the scanner working? Update: I have a 64-bit installation on the Toshiba Satellite. Thank you for your instructions, Chad--24216. I followed each step: 1 through 5. I also updated the Brother Linux scanner S-KEY tool. The output of dpkg -l | grep Brother is: ii brscan-skey 0.2.3-0 Brother Linux scanner S-KEY tool ii brscan3 0.2.11-5 Brother Scanner Driver ii mfc290ccupswrapper:i386 1.1.2-2 Brother CUPS Inkjet Printer Definitions ii mfc290clpr:i386 1.1.2-2 Brother lpr Inkjet Printer Definitions ii printer-driver-ptouch 1.3-3ubuntu0.1 printer driver Brother P-touch label printers Still the scanner does not work. Here is the message from Xsane: Failed to open device brother3:bus6;dev1: Invalid argument. Here is the message from Simple Scan: Failed to scan. Unable to connect to scanner. And Scan Utility still doesn't display the scanner line.

    Read the article

  • How can I convert .mp4 files to .3gp using ffmpeg?

    - by harisibrahimkv
    I would like to download a few videos from youtube and convert them to 3gp so that I can play them on my phone. I would like to know how this can be done using ffmpeg. I tried the various results on the net only to get the following errors. I used: ffmpeg -i dil.mp4 -sameq -ab 64k -ar 44100 dilenada.3gp I got: Unsupported codec for output stream #0.1 Seems stream 0 codec frame rate differs from container frame rate: 2000.00 (2000/1) - 29.92 (359/12) I used: ffmpeg -y -i dil.mp4 -r 20 -s 352x288 -b 400k -acodec libfaac -ac 1 -ar 2000 -ab 24k dilenada.3gp I got: Seems stream 0 codec frame rate differs from container frame rate: 2000.00 (2000/1) -> 29.92 (359/12) Unknown encoder 'libfaac' What am I doing wrong?

    Read the article

  • How can I audit users and access attempts to SSH on my server?

    - by RadiantHex
    I've had a few security problems with a server of mine, a few SSH users have been setting up fires aka giving problems. I would like to: Track user logins and logouts Track activity of these SSH, in order to discover any malicious activity Prevent users from deleting logs I am not much of a sys admin and I am quite inexperienced in this matter, so any kind of advice would be very welcome and very helpful. :)

    Read the article

  • Advantages of country TLD vs. .com

    - by Tschareck
    I want to get a domain for my site. The site's topic would be about Vienna, but the content will be in English. I was thinking, if I should get .com domain or .at domain. .at is both much cheaper and easier to get (there is less chance that my desired phrase is already registered). Is there any disadvantage in terms of SEO and page rank, if my domain does not end with .com? The site will be in English and targeted not just for Austria, but globally, mostly foreign tourists. I don't care if it's easy to remember the address, I expect most traffic to be from search engines anyway.

    Read the article

< Previous Page | 13 14 15 16 17 18 19  | Next Page >