Daily Archives

Articles indexed Wednesday November 30 2011

Page 2/16 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• osx 10.6 dhcp client-id option

  - by Clustermagnet

  Trying to join a osx machine on a dhcp network which forces certain client IDs. Even if I was to modify the client-id via the network properties, the DHCP server is not accepting this request, since Windows and Apple send this via different options You can set the ClassID in the Network Control Panel in the DHCP Client ID box. The trick lies in setting up your DHCP server to recognize it. Windows XP sends the DHCP class ID via DHCP option 77, and OS X sends it via option 61. You'll have to set your DHCP server to check for option 61, +with an offset of 1 and a length of 9+. That's the tricky bit. So, without modifying the DHCP server... (which does not belong to me), is there anything that can be done on OSX to modify the client-id option to be 77?

  Read the article

• File and Printer Sharing Port issue in Windows 7 64 bit

  - by Mohit

  So, This is totally weird and I could not find any way to fix it. In simple words after the diagnosis this what is happening. On a windows 7 64 bit box, Whenever I am trying to access a server using file share. It is trying to connect to port 80 http on the place of 445. I observed that using WireShark. Telnet to 445 works. Any clue how to fix this. Scanned the machine using Malware bytes, Symantec and MS live essentials . I dont want to recreate the whole machine again. Please help me here. Regards Mohit Thakral

  Read the article

• What software is available to keep track of hundreds of servers?

  - by djangofan

  What good software is available (free or not free) to help me keep track of information relating to hundreds of servers, their relationships to each other (parent/child, category, type), and information on connecting to them, as well as possibly showing a picture or grid of some kind that allows me to report these relationships and key information to my supervisor. I am trying to avoid the "spreadsheet solution" or "visio solution" because I want to share this information and make changes with other persons in my server team. In other words, the solution I am looking for is a cross between a spreadsheet solution and a visio solution, providing both graphing and configuration information WITHOUT monitoring, and in a consistent format.

  Read the article

• Last-modified date not showing up in indexed documents

  - by Jared

  We have tried everything, pushing feeds, setting up fields in "document dates" screen to enable all documents in the index to contain a value for Last-modified date. Nothing seems to make documents retain a "last-modified date" in the index. How does one enable a last-modified date for all documents in the index? Note: the meta value will come from an external xml source (not a database). Followed the google instructions for our gsa version (6.4.0.G.22). Yes I know the GSA version is quite old, we've been told by our google-representative support team themselves, that updating the GSA to the latest version "should" resolve the problem, and by "should" I mean, their GSA did the same thing (no last-modified date) and updating our GSA is another can of worms story :)

  Read the article

• Postfix connection lost after AUTH

  - by user84104

  Looking at the logs on my mailservers, I have noticed messages like the following: Nov 29 12:09:38 mta postfix/smtpd[8362]: connect from unknown[183.13.165.14] Nov 29 12:09:39 mta postfix/smtpd[8362]: lost connection after AUTH from unknown[183.13.165.14] Nov 29 12:09:39 mta postfix/smtpd[8362]: disconnect from unknown[183.13.165.14] Nov 29 12:09:39 mta postfix/smtpd[8409]: connect from unknown[183.13.165.14] Nov 29 12:09:40 mta postfix/smtpd[8409]: lost connection after AUTH from unknown[183.13.165.14] Nov 29 12:09:40 mta postfix/smtpd[8409]: disconnect from unknown[183.13.165.14] There are no SASL failures in these cases. There are SASL failures are logged at other times, but never with lost connection after AUTH. What is happening here, and should I do any about it? These are not MXs, and already have smtpd_client_connection_rate_limit set. Possibly related: The systems require either SMTPS or STARTTLS before AUTH is announced.

  Read the article

• How to start dovecot?

  - by chudapati09

  I'm building a web server to host multiple websites. I got everything working except the mail server. I'm using linode to host my vps and I've been following their tutorials. FYI, I'm using Ubuntu 11.10. Here is the link I've been following, http://library.linode.com/email/postfix/dovecot-mysql-ubuntu-10.04-lucid. I got up to the part where it tells me to restart dovecot, so I tried "service dovecot restart". But then I get this "restart: Unknown instance:". I'm logged in as root, so I'm not using sudo. Since that didn't work I tried "/etc/init.d/dovecot restart" and I get "dovecot start/running, process 4760". So I try "/etc/init.d/dovecot status" and I get "dovecot stop/waiting". So I tried "service dovecot start" and I get "dovecot start/running, process 4781". So I tried to get the status, so I tired "service dovecot status" and got "dovecot stop/waiting" Then I tired "/etc/init.d/dovecot start" and I get "dovecot start/running, process 4794". So I tired to get the status, so I tired "/etc/init.d/dovecot status" and got "dovecot stop/waiting" Just for kicks and giggles I tired to kill the process, I used the PID that I got when I did "service dovecot start", this was the command "kill -9 4444" and I get this "bash: kill: (4805) - No such process" Am I doing something wrong? --EDIT 1-- The following are logs that were found in /var/log/syslog that involved dovecot dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled) dovecot: ssl-params: Generating SSL parameters dovecot: ssl-params: SSL parameters regeneration completed dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) kernel: init: dovecot main process (10276) terminated with status 89 kernel: init: dovecot main process (10289) terminated with status 89 kernel: init: dovecot main process (10452) terminated with status 89 kernel: init: dovecot main process (2275) terminated with status 89 kernel: init: dovecot main process (3028) terminated with status 89 kernel: init: dovecot main process (3216) terminated with status 89 kernel: init: dovecot main process (3230) terminated with status 89 kernel: init: dovecot main process (3254) terminated with status 89 kernel: init: dovecot main process (3813) terminated with status 89 kernel: init: dovecot main process (3845) terminated with status 89 kernel: init: dovecot main process (4664) terminated with status 89 kernel: init: dovecot main process (4760) terminated with status 89 kernel: init: dovecot main process (4781) terminated with status 89 kernel: init: dovecot main process (4794) terminated with status 89 kernel: init: dovecot main process (4805) terminated with status 89 --Edit 2 (/etc/dovecot/dovecot.conf)-- The following is the dovecot.conf file protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/home/vmail/%d/%n/Maildir ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem namespace private { separator = . prefix = INBOX. inbox = yes } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster@[mydomainname.com] mail_plugins = sieve global_script_path = /home/vmail/globalsieverc } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default { user = root passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb static { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } -- Edit 3 (/var/log/mail.log) -- The following is what is in /var/log/mail.log dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled) dovecot: ssl-params: Generating SSL parameters postfix/master[9917]: daemon started -- version 2.8.5, configuration /etc/postfix dovecot: ssl-params: SSL parameters regeneration completed postfix/master[9917]: terminating on signal 15 postfix/master[10196]: daemon started -- version 2.8.5, configuration /etc/postfix dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) postfix/master[2435]: daemon started -- version 2.8.5, configuration /etc/postfix postfix/master[2435]: terminating on signal 15 postfix/master[2965]: daemon started -- version 2.8.5, configuration /etc/postfix

  Read the article

• Is it possible to change the postfix message-id?

  - by Marcus

  Is it possible to change the message-id in postfix? If I send Mails over an Java-Application I get the following message-id: message-id=<143303043.111334605578921.JavaMail.applicationanme@hostname> So I want that the message-id looks like this: message-id=<[email protected]> What I can understand, if I send mails with the Linux program mail it works: message-id=<[email protected]> I have already set my hostname in the postfix-conf, but when I send a mail with the java-application it doen't work. We use a relay host to send email and any messages which are sent without @domain.tld in the mail-id will detected as a spam mail. Do you have any idea how I can fix this?

  Read the article

• How to add GD to a PHP 5.3 CentOS installation from a different repo?

  - by Mauro

  I installed PHP 5.3 on a CentOS 5.3 using yum and repos from Webtatic (http://www.webtatic.com/packages/php53/) and now I'd like to add the GD library to that installation but Webtatic seems to be offline. Now: # yum install php-gd Fails of course (not the same PHP version) into: *Error: Missing Dependency: php-common = 5.1.6-27.el5_5.3 is needed by package php-gd-5.1.6-27.el5_5.3.x86_64* And: # yum install php53-gd Fails into Error: php53-common conflicts with php-common How can I add the GD libraries now?

  Read the article

• Other Ideas to troubleshoot Cisco IPSec VPN on OSX?

  - by Tawm

  We have one user running OSX Snow Leopard who is having issues staying connected to our VPN running off of an ASA5510. His connection can die even as he's actively pushing traffic across it or if he's been idle for a period of time. Other users on Snow Leopard, Lion, XP, Vista, 7 and various linux flavors are able to stay connected for 24hrs+ without issue We've deleted and remade the connection in System Preferences Networking, ran killall racoon (kills any lingering connections) Below are the logs from the user's system.log from a connect/disconnect cycle: Oct 10 21:22:25 username racoon[8192]: Connecting. Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Oct 10 21:22:25 username racoon[8192]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 XAUTH: success. (XAUTH Status is OK). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 Config: retransmited. (Mode-Config retransmit). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (MODE-Config). Oct 10 21:22:29 username configd[14]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.0.100), current interface setting (name: utun0, family: 1001, address: 10.215.8.53, subnet: 255.0.0.0, destination: 10.215.8.53). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username configd[14]: network configuration changed. Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:29 username racoon[8192]: Connected. Oct 10 21:22:29 username configd[14]: SCNCController: Connected. Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:47 username login[8200]: USER_PROCESS: 8200 ttys003 Oct 10 21:22:48 username GrowlHelperApp[160]: Periodic CFURLCache Insert stats (iters: 17240) - Tx time:0.001749, # of Inserts: 1, # of bytes written: 304, Did shrink: NO, Size of cache-file: 26624, Num of Failures: 0 Oct 10 21:25:24 username login[7367]: DEAD_PROCESS: 7367 ttys002 Oct 10 21:25:31 username login[7907]: DEAD_PROCESS: 7907 ttys001 Oct 10 21:27:32 username configd[14]: SCNCController: Disconnecting. (Connection was up for, 303 seconds). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Oct 10 21:27:32 username racoon[8192]: Disconnecting. (Connection was up for, 302.766105 seconds). Oct 10 21:27:32 username configd[14]: network configuration changed. Oct 10 21:27:34 username login[8200]: DEAD_PROCESS: 8200 ttys003

  Read the article

• SQL Server 2005 SP3 on Windows 7 - No Management Studio

  - by Mike Thomas

  I've been trying for a day and a half now to get SQL Server 2005, DEV edition, to work on Windows 7, 64 bit prof. I install from the disk, then run SP 3. I get a failure on the Client Components section of the Installation Progress along with this vague message - Product : Client Components Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQLTools9_Hotfix_KB955706_sqlrun_tools.msp.log Error Number : 1712 Error Description : MSP Error: 1712 One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible. I've uninstalled all Visual Studio and tried to make this as clean as possible, and have read a lot of the blog posts, but am really at my wits end about this. I am not a DBA, but I use SQL Server all the time when coding and testing apps. Does anyone have any ideas as to where I can get this sorted out? I've been ati this for a long time and have never encountered an installation as bad as this one. Thanks Mike Thomas

  Read the article

• SharePoint MOSS - Serve HTTP content on an HTTPS page without Mixed Content Warning?

  - by kcb263

  Our "portal-like" SharePoint site is served using HTTPS/SSL. So a user goes to https://web.company.com and sees content and different Web Parts. So far, no problem. The desire now is to have new Web Parts added that either frame HTTP content (such as Weather Bug) or HTTP RSS feeds. The issue that arises is that by doing this, results in a "Mixed Content" warning in the browser. Has anybody successfully been able to implement such a scenario, or one similar to it? The options we have looked at, unsuccessfully, have been: using Apache Reverse Proxy Server mirror an external site Custom Web Parts

  Read the article

• Installing SDM on a Cisco 2821 ISR

  - by Sam Sanders

  I trying to change the configuration of our router, it's a Cisco 2821 Integrated Services Router. I don't know much about Cisco products. While looking at the PDF manual for the router I notices it talked about SDM Security Device Manager. But when I point my web browser at the IP address of the router, it give me a very simple web interface. It's sort of like a string builder for CLI commands. I'm guessing SDM was not installed on it. So my question how would I go about do that? I found this link (below), but I'm a bit new to networking. So any advice would be welcome. http://www.cisco.com/en/US/docs/routers/access/cisco_router_and_security_device_manager/software/quick/guide/SDMq7.html

  Read the article

• Apache Virtual Host Configuration

  - by Carl

  I have been searching the internet for an hour now, and I was hoping for a quick hint here so that I could solve my problem a wee bit faster. My virtual server is so far only accessible through an IP address, no DNS entry yet, and so far none needed either. The problem I have is with Apache2, the virtual hosts are puzzling me. What I need is: Access to my project (based on Symfony2) from the outside with the IP address Access to my project from localhost What I have got: Access from the outside results in rendering the websites in /var/www/vhosts/htdocs/default, while from the inside results in rendering the websites in /var/www. Why the difference? What is a recommended configuration for my use case?

  Read the article

• Two network interfaces and two IP addresses on the same subnet in Linux

  - by Scott Duckworth

  I recently ran into a situation where I needed two IP addresses on the same subnet assigned to one Linux host so that we could run two SSL/TLS sites. My first approach was to use IP aliasing, e.g. using eth0:0, eth0:1, etc, but our network admins have some fairly strict settings in place for security that squashed this idea: They use DHCP snooping and normally don't allow static IP addresses. Static addressing is accomplished by using static DHCP entries, so the same MAC address always gets the same IP assignment. This feature can be disabled per switchport if you ask and you have a reason for it (thankfully I have a good relationship with the network guys and this isn't hard to do). With the DHCP snooping disabled on the switchport, they had to put in a rule on the switch that said MAC address X is allowed to have IP address Y. Unfortunately this had the side effect of also saying that MAC address X is ONLY allowed to have IP address Y. IP aliasing required that MAC address X was assigned two IP addresses, so this didn't work. There may have been a way around these issues on the switch configuration, but in an attempt to preserve good relations with the network admins I tried to find another way. Having two network interfaces seemed like the next logical step. Thankfully this Linux system is a virtual machine, so I was able to easily add a second network interface (without rebooting, I might add - pretty cool). A few keystrokes later I had two network interfaces up and running and both pulled IP addresses from DHCP. But then the problem came in: the network admins could see (on the switch) the ARP entry for both interfaces, but only the first network interface that I brought up would respond to pings or any sort of TCP or UDP traffic. After lots of digging and poking, here's what I came up with. It seems to work, but it also seems to be a lot of work for something that seems like it should be simple. Any alternate ideas out there? Step 1: Enable ARP filtering on all interfaces: # sysctl -w net.ipv4.conf.all.arp_filter=1 # echo "net.ipv4.conf.all.arp_filter = 1" >> /etc/sysctl.conf From the file networking/ip-sysctl.txt in the Linux kernel docs: arp_filter - BOOLEAN 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. arp_filter for the interface will be enabled if at least one of conf/{all,interface}/arp_filter is set to TRUE, it will be disabled otherwise Step 2: Implement source-based routing I basically just followed directions from http://lartc.org/howto/lartc.rpdb.multiple-links.html, although that page was written with a different goal in mind (dealing with two ISPs). Assume that the subnet is 10.0.0.0/24, the gateway is 10.0.0.1, the IP address for eth0 is 10.0.0.100, and the IP address for eth1 is 10.0.0.101. Define two new routing tables named eth0 and eth1 in /etc/iproute2/rt_tables: ... top of file omitted ... 1 eth0 2 eth1 Define the routes for these two tables: # ip route add default via 10.0.0.1 table eth0 # ip route add default via 10.0.0.1 table eth1 # ip route add 10.0.0.0/24 dev eth0 src 10.0.0.100 table eth0 # ip route add 10.0.0.0/24 dev eth1 src 10.0.0.101 table eth1 Define the rules for when to use the new routing tables: # ip rule add from 10.0.0.100 table eth0 # ip rule add from 10.0.0.101 table eth1 The main routing table was already taken care of by DHCP (and it's not even clear that its strictly necessary in this case), but it basically equates to this: # ip route add default via 10.0.0.1 dev eth0 # ip route add 130.127.48.0/23 dev eth0 src 10.0.0.100 # ip route add 130.127.48.0/23 dev eth1 src 10.0.0.101 And voila! Everything seems to work just fine. Sending pings to both IP addresses works fine. Sending pings from this system to other systems and forcing the ping to use a specific interface works fine (ping -I eth0 10.0.0.1, ping -I eth1 10.0.0.1). And most importantly, all TCP and UDP traffic to/from either IP address works as expected. So again, my question is: is there a better way to do this? This seems like a lot of work for a seemingly simple problem.

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

• Take all fields in a database table and put them straight into a text file

  - by DalexL

  I have an database file (mdb) file that contains a dictionary of words. A couple thousand of them. I just need the words (in the order they are already in) put into a text file. Currently they have ID's associated with them (e.g. 1, 2, 3) but I don't need it. I just need the words. What is the best way to do this? Actually, if somebody is able to find a dictionary of English words (something along the lines of a scrabble dictionary) that is free online, I'll accept that too. I just can't seem to find any good ones online.

  Read the article

• Lion refuses to be installed to any partitions on Mac

  - by Arafinwe

  I was attempting to install Lion on my MacBook 7-1, on which I have installed Ubuntu 10.04 on a separate partition. Currently, my partitions look like this: |-----Mac-----|-Grub-|----Ubuntu----|-Ubuntu Swap-|. However, Disk Utility (and I assume the rest of Mac OS X) sees it as |-----Mac-----|-----Unknown-----|. Note that I am using rEfit as my default bootloader. When attempting to install Lion, I am greeted by this screen: By the way, it appears that only the Grub partition is recognized, as I remember setting it to about 10 MB. Can anyone help with this?

  Read the article

• How to repair a broken .EXE file association

  - by Pointy

  After (hopefully) scrubbing viruses out of a Windows 7 installation (after deciding not to simply run over the laptop repeatedly with my car), I've got everything almost back to normal. The only lingering issue I have is that for my non-admin users, the ".exe" file extension doesn't work. That is, clicking on the various desktop application links results in a "How do you want to open this?" dialog. I've been through the alleged registry fixing from "winhelponline" and that had absolutely no effect. I've tried running "assoc" for the affected users, but it reports the .exe association to be "exefile" even though it persistently does not work. Right-clicking on a desktop icon and then choosing "start" does successfully open an application, but that's clearly a terrible situation. For my admin user, things seem to work fine. What do I need to do to get things working?

  Read the article

• 255 Character limit on VLOOKUP

  - by zod

  Using excel 2003, the formula: =VLOOKUP(D1 ,A1:B135, 2) fails if the length of D1 exceeds 255 characters (i.e. the list has some text longer then 255 characters, D1 has the same text value, and VLOOKUP returns #VALUE!). MATCH seems to suffer from the same character limit. I cannot find any official confirmation of these limits, for example here: http://office.microsoft.com/en-us/excel-help/vlookup-HP005209335.aspx or here: http://office.microsoft.com/en-us/excel-help/excel-specifications-and-limits-HP005199291.aspx?CTT=3 I know that excel has a 255 limit on the length of text used in formulae, but it suggests connate should work (it does not in this case, and I am not using strings in the formula, but referencing another cell). Can somebody confirm that these limit exist (it is always possible I am doing something else wrong)? More importantly, does anyone know of a way around them? Thanks

  Read the article

• See former key sequences in vim

  - by Vasiliy Sharapov

  Sometimes I share screen shots and clips of vim usage with others. It would be nice to expand on the part of the status bar highlighted in this picture: I would like some way to make previous key sequences visible as well, such as: y2w jj f[ p 2d - You can see the key sequences leading up to the current one. I'll elaborate on my wish list at the bottom. Is something like this is available as a plugin or vim script? The sheer number of scripts available on vim online makes this hard to find by keyword. Some features I would hope for (but seem improbable): Delimit key sequences with a non-keyboard character instead of space, and a different one for the current command, so y2w jj f[ p 2d might become y2w¦jj¦f[¦p » 2d Replace keys that have a letter alternative with the alternative, such as the right arrow key - ^[[C with the equivalent l. Edit: To clarify, the right arrow key is a valid key in vim, but has no character to represent it, the l key preforms the same function and could/should substitute it. Have previous keystrokes run all the way to the beginning of the line (instead of just one or two), and just have vim's command prompt overwrite it when necessary. Replace some keystrokes with a more elegant alternative, for example hhhhh with 5h or more impressively d2f) with d% (in the appropriate situation).

  Read the article

• Any way to move Office Starter To-Go to a non-flash drive?

  - by Scott Bussinger

  Microsoft's Office Starter edition has an interesting option to create a portable version on a USB flash drive using the "Microsoft Office Starter To-Go Device Manager". This creates a portable version of the Word and Excel starter editions (limited versions of the normal applications that include ads). This would be great for use in Virtual Machines since it requires no registration and has a perpetual license. But I want to copy the files off of the flash drive and just store them in the VHD. The problem is that it appears when you try to run the office.exe executable from anywhere but the USB drive you get the error "Microsoft Office Starter To-Go cannot be launched because it is installed on an unsupported device." Any ideas what it is objecting to and is there a legal workaround for this? A limited but legal and portable version of Word and Excel is a great idea. But tying it specifically to a USB flash drive seems a bit odd. They don't seem to care how many of those flash drives you create so it's not clear what the restrictions are about.

  Read the article

• Can I directly open an MMF Cash Drawer through RJ-11 port?

  - by roviuser

  My aunt bought this cash drawer at an auction recently and has tasked me with figuring how to open it via a computer. We have the key (pictured) and can open it manually, but I'd like to be able to plug it directly into a computer and open it via some sort of program or script. It has a built in rj-11 cord coming out of the back of it. Initial research shows that it might usually be used with a printer, but I want to be able to connect it directly to the computer. Edit: this needs to be able to work with windows 7. Edit2: http://imgur.com/a/czEMs imgur gallery of the innards.

  Read the article

• Restore Default OSX Home Folder Icons

  - by Cerales

  I want to keep folders such as Pictures and Documents in my home folder in sync between computers; at the moment, I'm using Dropbox to do this. On Computer A I added a symlink to the folders in my home directory to the Dropbox folder. On Computer B I deleted the existing Pictures and Documents folders and replaced them with symlinks to the folders in the Dropbox folder. This works very well, except that in Finder I don't see the nice little icons that Lion has by default for folders of a particular kind. Is there any way to restore these?

  Read the article

• Firefox only shows a black window over RDP

  - by Andrew Aylett

  I have a Windows 7 desktop running Firefox 4. If I remote-desktop (RDP) from another PC into my already-running session, the Firefox window turns black. Flash applications are still visible, if I'm on a tab with one, and I can apparently interact with Firefox normally, I just can't see anything in the window. I'm after an explanation, if possible, and (even better!) a workaround or fix that doesn't involve a different web browser :).

  Read the article

• Safe to remove Python2.6 files?

  - by darkfeline

  I'm using Linux Mint 11 (will upgrade soon), and I've noticed that, even though I don't have any python2.6 packages installed with apt, there's a bunch of residual python2.6 files scattered around my drive, including, but not limited to, dist-packages in /usr/lib/python2.6 and various /usr/share stuff. Is there any way to test if these files are still being used? I'm tempted to sudo rm -rf the lot of them, but I'm scared it'll break stuff. Also, does anyone have any idea where these files could have come from? I believe I had python2.6 installed once upon a time, but I made sure to --purge them, so there shouldn't be any trace of them left, right? EDIT: after using a quick script to check all of the files, it appears most of them belong to important packages, so I won't try weeding out the few which I know are probably useless. Although I am curious why so many packages have python2.6 files when I don't even have it installed. These files are not associated with any packages and I'm not sure if they are safe to remove: /usr/bin/ipython2.6 /usr/lib/python2.6/dist-packages/distribute-0.6.15.egg-info /usr/lib/python2.6/dist-packages/easy_install.py /usr/lib/python2.6/dist-packages/IPython /usr/lib/python2.6/dist-packages/ipython-0.10.1.egg-info /usr/lib/python2.6/dist-packages/setuptools /usr/lib/python2.6/dist-packages/setuptools.egg-info /usr/lib/python2.6/dist-packages/setuptools.pth /usr/lib/python2.6/dist-packages/site.py /usr/lib/python2.6/dist-packages/wx.pth /usr/local/lib/python2.6 /usr/local/lib/python2.6/dist-packages /usr/local/lib/python2.6/site-packages /usr/share/man/man1/ipython2.6.1.gz

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >