Monthly Archives

Articles indexed in March 2010

Page 2261/2613 | < Previous Page | 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268  | Next Page >

  • Is keeping the primary hard disk as disk C: still relevant?

    - by Jeremy French
    Back in the day, floppy disks were a: and if you were lucky b:, then when permanent storage came along c: was the default for hard disks (as I remember it) Now that many computers no longer have floppy disks is it possible to have your primary hard disk as A: is the convention out dated? Removable drives (like DVDs and flash readers) now seem to take lower precedence than permanent storage so it is a bit of an oddity that floppy disks should have higher letters.

    Read the article

  • How do I protect the trunk from hapless newbies?

    - by Michael Haren
    A coworker relayed the following problem, let's say it's fictional to protect the guilty: A team of 5-10 works on a project which is issue-driven. That is, the typical flow goes like this: a chunk of work (bug, enhancement, etc.) is created as an issue in the issue tracker The issue is assigned to a developer The developer resolves the issue and commits their code changes to the trunk At release time, the frozen, and heavily tested trunk or release branch or whatever is built in release mode and released The problem he's having is that a couple newbies made several bad commits that weren't caught due to an unfortunate chain of events. This was followed by a bad release with a rollback or flurry of hot fixes. One idea we're toying with: Revoke commit access to the trunk for newbies and make them develop on a per-developer branch (we're using SVN): Good: newbies are isolated and can't hurt others Good: committers merge newbie branches with the trunk frequently Good: this enforces rigid code reviews Bad: this is burdensome on the committers (but there's probably no way around it since the code needs reviewed!) Bad: it might make traceability of trunk changes a little tougher since the reviewer would be doing the commit--not too sure on this. Update: Thank you, everyone, for your valuable input. I have concluded that this is far less a code/coder problem than I first presented. The root of the issue is that the release procedure failed to capture and test some poor quality changes to the trunk. Plugging that hole is most important. Relying on the false assumption that code in the trunk is "good" is not the solution. Once that hole--testing--is plugged, mistakes by everyone--newbie or senior--will be caught properly and dealt with accordingly. Next, a greater emphasis on code reviews and mentorship (probably driven by some systematic changes to encourage it) will go a long way toward improving code quality. With those two fixes in place, I don't think something as rigid or draconian as what I proposed above is necessary. Thanks!

    Read the article

  • CakePHP Test Fixtures Drop My Tables Permanently After Running A Test Case

    - by Frank
    I'm not sure what I've done wrong in my CakePHP unit test configuration. Every time I run a test case, the model tables associated with my fixtures are missing form my test database. After running an individual test case I have to re-import my database tables using phpMyAdmin. Here are the relevant files: This is the class I'm trying to test comment.php. This table is dropped after the test. App::import('Sanitize'); class Comment extends AppModel{ public $name = 'Comment'; public $actsAs = array('Tree'); public $belongsTo = array('User' => array('fields'=>array('id', 'username'))); public $validate = array( 'text' = array( 'rule' =array('between', 1, 4000), 'required' ='true', 'allowEmpty'='false', 'message' = "You can't leave your comment text empty!") ); database.php class DATABASE_CONFIG { var $default = array( 'driver' = 'mysql', 'persistent' = false, 'host' = 'project.db', 'login' = 'projectman', 'password' = 'projectpassword', 'database' = 'projectdb', 'prefix' = '' ); var $test = array( 'driver' = 'mysql', 'persistent' = false, 'host' = 'project.db', 'login' = 'projectman', 'password' = 'projectpassword', 'database' = 'testprojectdb', 'prefix' = '' ); } My comment.test.php file. This is the table that keeps getting dropped. <?php App::import('Model', 'Comment'); class CommentTestCase extends CakeTestCase { public $fixtures = array('app.comment', 'app.user'); function start(){ $this-Comment =& ClassRegistry::init('Comment'); $this-Comment-useDbConfig = 'test_suite'; } This is my comment_fixture.php class: <?php class CommentFixture extends CakeTestFixture { var $name = "Comment"; var $import = 'Comment'; } And just in case, here is a typical test method in the CommentTestCase class function testMsgNotificationUserComment(){ $user_id = '1'; $submission_id = '1'; $parent_id = $this-Comment-commentOnModel('Submission', $submission_id, '0', $user_id, "Says: A"); $other_user_id = '2'; $msg_id = $this-Comment-commentOnModel('Submission', $submission_id, $parent_id, $other_user_id, "Says: B"); $expected = array(array('Comment'=array('id'=$msg_id, 'text'="Says: B", 'submission_id'=$submission_id, 'topic_id'='0', 'ack'='0'))); $result = $this-Comment-getMessages($user_id); $this-assertEqual($result, $expected); } I've been dealing with this for a day now and I'm starting to be put off by CakePHP's unit testing. In addition to this issue -- Servral times now I've had data inserted into by 'default' database configuration after running tests! What's going on with my configuration?!

    Read the article

  • ASP.NET MVC: How to allow some HTML mark-up in Html Encoded content?

    - by Dr. Zim
    Is there some magic existing code in MVC 2 to Html.Encode() strings and allow certain html markup, like paragraph marks and breaks? (coming from a Linq to SQL database field) A horrible code example to achieve the effect: Html.Encode(Model.fieldName).Replace("&lt;br /&gt;", "<br />") What would be really nice is to overload something and pass to it an array (or object) full of allowed html tags.

    Read the article

  • is it possible to combine will_paginate with find_by_sql?

    - by Tam
    In my rails application I want to use will_paginate plugin to paginate on my query. Is that possible? I tried doing something like this but it didn't work: @users = User.find_by_sql(" SELECT u.id, u.first_name, u.last_name, CASE WHEN r.user_accepted =1 AND (r.friend_accepted =0 || r.friend_accepted IS NULL) .........").paginate( :page => @page, :per_page => @per_page, :conditions => conditions_hash, :order => 'first_name ASC') If not, can you recommend a way around this or a way that might work as I don't want to write my own pagination.

    Read the article

  • Ajax Content Loading(Processing) image or indicator

    - by Arny
    Hi there, in part of my web page, I have couple of asp:image Thumbnails, onclick I use ajax modal popup extender to show the imgae in full size which are working fine, what I need to add is to have a processing image or indicator both in thumbnail and modal popup extender, I also have ajax autocomplete that is working fine, I need to add some indicator or processing image to it as soon as user start typing a word. any idea? Thanks in advance

    Read the article

  • GameKit: GKSession manual

    - by mongeta
    Hello, I want to connect two devices using the GKSession, starting one as a server and the other one as a client. Using this configuration I can't use the GKPeerPickerController. I'm having problems for connecting the two devices: Using only bluetooth: impossible using WiFi: at least there are some data exchange between the devices but no successfully conection. In the interface file I have the GKSessionDelegate GKSession *session; In the implementation, I start the server using this code: session = [[GKSession alloc] initWithSessionID:@"iFood" displayName:nil sessionMode:GKSessionModeClient]; session.delegate = self; session.available = YES; The client starts using this code: session = [[GKSession alloc] initWithSessionID:@"iFood" displayName:nil sessionMode:GKSessionModeServer]; session.delegate = self; session.available = YES; How I can force the use of Bluetooth instead of the WiFi ? Also I have implemented those calls: -(void)session:(GKSession *)session didReceiveConnectionRequestFromPeer:(NSString *)peerID { NSLog(@"Someone is trying to connect"); } - (BOOL)acceptConnectionFromPeer:(NSString *)peerID error:(NSError **)error { NSLog(@"acceptConnectionFromPeer"); } When I start, I get this into the debugger: Listening on port 50775 2010-02-19 14:55:02.547 iFood[3009:5103] handleEvents started (2) And when the other device starts to find, I get this: ~ DNSServiceBrowse callback: Ref=187f70, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 name=00eGs1R1A..Only by Audi regtype=_2c3mugr67ej6j7._udp. domain=local. ~ DNSServiceQueryRecord callback: Ref=17bd40, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 fullname=00eGs1R1A\.\.Only\032by\032Audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=4500 ** peer 1527211048: oldbusy=0, newbusy=0 ~ DNSServiceBrowse callback: Ref=187f70, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 name=00eGs1R1A..Only by Audi regtype=_2c3mugr67ej6j7._udp. domain=local. GKPeer[186960] 1527211048 service count old=1 new=2 ~ DNSServiceQueryRecord callback: Ref=17bd40, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 fullname=00egs1r1a\.\.only\032by\032audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=7200 ** peer 1527211048: oldbusy=0, newbusy=0 ~ DNSServiceBrowse callback: Ref=187f70, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 name=00TF5kc1A..Only by Audi regtype=_2c3mugr67ej6j7._udp. domain=local. ~ DNSServiceQueryRecord callback: Ref=188320, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 fullname=00tf5kc1a\.\.only\032by\032audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=7200 ** peer 1723356125: oldbusy=0, newbusy=0 ~ DNSServiceQueryRecord callback: Ref=188320, Flags=2, IFIndex=2 (name=[en0]), ErrorType=0 fullname=00TF5kc1A\.\.Only\032by\032Audi._2c3mugr67ej6j7._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=4500 ** peer 1723356125: oldbusy=0, newbusy=0 What I'm missing here ? I'm sure that both devices have bluetooth enabled and connected into the same WiFi. thanks, r.

    Read the article

  • Recover HttpHeader on Flex

    - by xfernandez
    Is it possible to recover the HttpHeader information from a flex Client? I want to do the following: User download the flex client from a web site In each communication flex client catch the HttpHeader information in order to change (If it is necessary) the host information to be connected (For example in a HA configuration) Thanks

    Read the article

  • Wanted to know in detail about how shared libraries work vis-a-vis static library.

    - by goldenmean
    Hello, I am working on creating and linking shared library (.so). While working with them, many questions popped up which i could not find satisying answers when i searched for them, hence putting them here. The questions about shared libraries i have are: 1.) How is shared library different than static library? What are the Key differences in way they are created, they execute? 2.) In case of a shared library at what point are the addresses where a particular function in shared library will be loaded and run from, given? Who gives those functions is load/run addresses? 3.) Will an application linked against shared library be slower in execution as compared to that which is linked with a static library? 4.) Will application executable size differ in these two cases? 5.) Can one do source level debugging of by stepping into functions defined inside a shared library? Is any thing extra needed to make these functions visible to the application? 6.) What are pros and cons in using either kind of library? Thanks. -AD

    Read the article

  • FogBugz On Demand + online source control at low/no cost?

    - by quux
    I have a project in the free hosted FogBugz On Demand (FOD) product right now. This is great for feature/issue tracking. But I've been working from a codebase that is solely on my development machine. I'd like to collaborate with another guy who is thousands of miles from me. So we need a source control solution (SCM)! I use Visual Studio (2005, but can upgrade to later versions as needed). I am aware that FogBugz can integrate with a number of source control systems. So now the question is: which online SCM products can integrate well with FOD and VS? And which ones do so well at low or no cost, for a small code repository. And where might I find a proven recipe for putting this together. I'm open to other solutions which provide the same functionality. Please don't suggest Trac - I regard it highly, but I want the features of FOB (especially the evidence based scheduling) in my issue tracking solution. So really, I need to combine FOB + VS + some online SCM product into a low or no cost solution for two coders to collaborate on.

    Read the article

  • Difference between GIT and CVS

    - by jay
    What is the difference between git and cvs version control systems? I have been happily using CVS for over 10 years and have been told that GIT is much better. Could someone please explain what the difference between the two is and why one is better than the other?

    Read the article

  • What strategy do you use to sync your code when working from home

    - by Ben Daniel
    At my work I currently have my development environment inside a Virtual Machine. When I need to do work from home I copy my VM and any databases I need onto a laptop drive sized external USB drive. After about 10 minutes of copying I put the drive in my pocket and head home, copy back the VM and databases onto my personal computer and I'm ready to work. I follow the same steps to take the work back with me. So if I count the total amount of time I spend waiting around for files to finish copying in order for me to take work home and bring it back again, it comes to around 40 minutes! I do have a VPN connection to my work from home (providing the internet is up at both sites) and a decent internet speed (8mbits down/?up) but I find Remote Desktoping into my work machine laggy enough for me to want to work on my VM directly. So in looking at what other options I have or how I could improve my existing option I'm interested in what strategy you use or recommend to do work at home and keeping your code/environment in sync. EDIT: I'd prefer an option where I don't have to commit my changes into version control before I leave work - as I like to make meaningful descriptive comments in my commits, committing would take longer than just copying my VM onto a portable drive! lol Also I'd prefer a solution where my dev environment stays in sync too. Having said that I'm still very interested in your own solutions even if they don't exactly solve my problem as best as I'd like. :)

    Read the article

  • Ruby SerialPorts Gem

    - by Seth Archer
    Using Ruby SerialPorts Gem to interact with hardware. When I write a byte array to the hardware using a program called "Serial Port Monitor" the hardware responds correctly. However, when I write the same byte array using ruby it doesn't work unless I do a read request just before the write request. This device doesn't respond correctly with this sp = SerialPort.new(args) sp.write [200.chr, 30.chr, 6.chr, 5.chr, 1.chr, 2.chr, 0.chr, 244.chr] But it does if I add a read request before the write. Like this sp SerialPort.new(args) sp.read sp.write [200.chr, 30.chr, 6.chr, 5.chr, 1.chr, 2.chr, 0.chr, 244.chr] This works, but I'm at a loss as to why. I should also add that the first snippet does work occasionally maybe 1/10 of the time.

    Read the article

  • C# Get HTML Element Data with Post Back

    - by user303938
    One site would take data from the site var.C # PostBack method.But when the page's source code as submitted does not renewed.Object Can not Be Coming Referanced error.So I do post but the page refresh itself.This post has been displayed next to new data coming from the user how can I get? Thanks...

    Read the article

  • SSH from Windows hangs when using insert mode in vim on Dreamhost: Why?

    - by cletus
    I have SSH set up using Cygwin on Windows XP SP3 to Dreamhost. It works fine except that when I edit a file with vi and use insert mode (eg press 'i' and type in some stuff). I then try and hit escape and ZZ to save/exit and it hangs instead. My edits aren't saved and I have to kill the session (locally) and kill the vi process on Dreamhost. This is highly annoying. It's not reliable either. Sometimes it does work. Also, this happens with PuTTY too.

    Read the article

  • Database hidden in SQL Server

    - by Colin Desmond
    During an aborted TFS import (2008 into 2010), I have managed to "lose" a database in 2008. The database is not visible in Management Studio, but the SQL Server exe has a handle on the .mdf file (according to UnLocker), it says it cannot attach it because the file is in use and it cannot attach a copy of the file (created when SQL Server was stopped), as it says a DB of the same name is already attached. Given I am using the same TFS admin account I have always used and have always been able to see the database in, why is this database missing and, more importantly, how do I get it back again?

    Read the article

  • Corrupt Vista Account - With a twist

    - by oldSkool-Soldier
    I have a Windows Vista system whose profile seems to have been corrupted. Many solutions seem to indicate that you create another admin account, log in as that account, and delete the offending profile information for the account that is corrupted. Here's the twist: There are two accounts on this System - 1. Administrator Account 2. Standard Account. It's the Administrator Account which has become corrupted. If you attempted to do any user managment / attempt to create a new account under the 'Standard Account', UAC prompts for a user/pass. It has the admin account come up by default, and asking for a password (of which, there is none). When you click 'OK' - nothing happens (no doubt due to the fact that the account is corrupted, so it can't verify who or what is trying to allow the administrative privilage). Can anyone think of a way of fixing this account, or creating another administrator account to resolve this issue? Many thanks in advance.

    Read the article

  • Why is my connection to Playstation Network so unreliable? [closed]

    - by jammus
    Hello friends. I'm 28 and my girlfriend is 24. Our home internet connection is pretty reliable, it's almost always up and can get fairly high download speeds. However, my experience with the Playstation Network is pretty frustrating. I'm always getting kicked off or getting quite high latency. Are there any tips or tricks that you might help my on-line gaming run more smoothly? I'm using a wireless connection for the PS3, is this likely to affect things?

    Read the article

  • What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

    - by Alex R
    I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

    Read the article

< Previous Page | 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268  | Next Page >