Daily Archives

Articles indexed Tuesday January 11 2011

Page 29/37 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • How to use two external monitors on Alienware m17x along with laptop monitor (total 3 monitors)

    - by Steph
    I'd like to use the native 1920x1200 laptop monitor that comes with the Alienware m17x along with 2 additional external monitors, one through the displayport and another through the hdmi port. Is there any way to do this? And if so how? I've tried to update the nvidia drivers, I've installed ultramon, etc., but I can't seem to make it happen. I've seen posts that suggest it's possible, but I can't seem to figure out how.

    Read the article

  • CodePlex Daily Summary for Tuesday, January 11, 2011

    CodePlex Daily Summary for Tuesday, January 11, 2011Popular ReleasesArcGIS Editor for OpenStreetMap: ArcGIS Editor for OpenStreetMap 1.1 beta2: This is the beta2 release for the ArcGIS Editor for OpenStreetMap version 1.1. Changes from version 1.0: Multi-part geometries are now supported. Homogeneous relations (consisting of only lines or only polygons) are converted into the appropriate multi-part geometry. Mixed relations and super relations are maintained and tracked in a stand-alone relation table. The underlying editing logic has changed. As opposed to tracking the editing changes upon "Save edit" or "Stop edit" the changes a...VSSpeedster - Parallel Builds for VS: VSSpeedster 1.2 (beta): - Improved Parallel Builds - Cancel running Parallel Build using Ctrl+BreakASP.NET Comet Ajax Library (Reverse Ajax - Server Push): Multiple server ASP.NET Reverse Ajax: This sample project demonstrates how is easy to scale your web applications via PokeInHawkeye - The .Net Runtime Object Editor: Hawkeye 1.2.5: In the case you are running an x86 Windows and you installed Release 1.2.4, you should consider upgrading to this release (1.2.5) as it appears Hawkeye is broken on x86 OS. I apologize for the inconvenience, but it appears Hawkeye 1.2.4 (and probably previous versions) doesn't run on x86 Windows (See issue http://hawkeye.codeplex.com/workitem/7791). This maintenance release fixes this broken behavior. This release comes in two flavors: Hawkeye.125.N2 is the standard .NET 2 build, was compile...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (January 2011): Another release build for daily use; it contains many new features, enhanced compatibility with latest PHP opensource applications and several issue fixes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger. Changes made within this release include following: New features available only in Phalanger. Full support of Multi-Script-Assemblies was implemented; you can build your application into several DLLs now. Deploy them separately t...EnhSim: EnhSim 2.3.0: 2.3.0This release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Changed how flame shoc...AutoLoL: AutoLoL v1.5.3: A message will be displayed when there's an update available Shows a list of recent mastery files in the Editor Tab (requested by quite a few people) Updater: Update information is now scrollable Added a buton to launch AutoLoL after updating is finished Updated the UI to match that of AutoLoL Fix: Detects and resolves 'Read Only' state on Version.xmlExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.7 beta Released: Hi, Today Visifire is released along with one new feature * Inlines property has been implemented in Title. Now onwards you can customize the text content in Title. Please check out the Visifire documentation for more information. This release contains fix for the following bugs: * Styles for chart elements were not working as expected. * Bar chart was not drawn properly if AxisMinimum property was set to a value above zero base line. * In DateTime axis, AxisLables were no...Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.StyleCop for ReSharper: StyleCop for ReSharper 5.1.14980.000: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the correct path ...VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.UltimateJB: Ultimate JB 2.03 PL3 KAKAROTO + HERMES + Spoof 3.5: Voici une version attendu avec impatience pour beaucoup : - La version PL3 KAKAROTO intégre ses dernières modification et intégre maintenant le firmware 2.43 !!! Conclusion : - UltimateJB203PSXXXDEFAULTKAKAROTO=> Pas de spoof mais disponible pour les PS3 suivantes : 3.41_kiosk 3.41 3.40 3.30 3.21 3.15 3.10 3.01 2.76 2.70 2.60 2.53 2.43 - UltimateJB203PS341_HERMES => Pas de spoof mais version hermes 4b - UltimateJB203PS341HERMESSPOOF35X => hermes 4b + spoof des firmwares 3.50 et 3.55 au li....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...EFMVC - ASP.NET MVC 3 and EF Code First: EFMVC 0.5- ASP.NET MVC 3 and EF Code First: Demo web app ASP.NET MVC 3, Razor and EF Code FirstVidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch....NET Voice Recorder: Auto-Tune Release: This is the source code and binaries to accompany the article on the Coding 4 Fun website. It is the Auto Tuner release of the .NET Voice Recorder application.BloodSim: BloodSim - 1.3.2.0: - Simulation Log is now automatically disabled and hidden when running 10 or more iterations - Hit and Expertise are now entered by Rating, and include option for a Racial Expertise bonus - Added option for boss to use a periodic magic ability (Dragon Breath) - Added option for boss to periodically Enrage, gaining a Damage/Attack Speed buffASP.NET MVC CMS ( Using CommonLibrary.NET ): CommonLibrary.NET CMS 0.9.5 Alpha: CommonLibrary CMSA simple yet powerful CMS system in ASP.NET MVC 2 using C# 4.0. ActiveRecord based components for Blogs, Widgets, Pages, Parts, Events, Feedback, BlogRolls, Links Includes several widgets ( tag cloud, archives, recent, user cloud, links twitter, blog roll and more ) Built using the http://commonlibrarynet.codeplex.com framework. ( Uses TDD, DDD, Models/Entities, Code Generation ) Can run w/ In-Memory Repositories or Sql Server Database See Documentation tab for Ins...New Projects.NET Event Spy: Full information available here: http://martincarolan.blogspot.com/2011/01/secret-project.html Simple development/debugging tool that hooks into and monitors events raised on any .NET object3DTweet: 3Dtweet is an effort to make tweets appear in a aesthetic manner to the users of windows phone.Its developed using VS2010 expresss.Agile .NET with SCRUM and XP: Source code for the book Apress Professional Agile .NET Development with SCRUM and XPBeskid Niski Agroturystyka: Travel Poland, turystyka w beskidzie niskim. Agroturystyka w miejscowosci Losie nad zalewem KlimkowkaCoding better: A better coding labs for .net new feature.FBApp: A simple facebook app I was busy with over the holidays as an experiment to try out the facebook api. Is currently not complete but I wanted to get some criticism on it for my 1st web app. It is developed using WPF and C#. Freemium Helper for WebMatrix: The Freemium Helper for WebMatrix provides an easy way to apply the Freemium model into your WebMatrix site. Using different user groups (or roles), it allows you to easily enable or disable features on your pages depending on the stock-keeping unit the user has paid for.Haversine Distance Calculation: A very small project that implements the Haversine formula, which calculates the great circle distance between two points on the earth's surface. The points are latitude / longitude coordinates in DD. The formula is implemented client side with javascript and server side with C#.Hexa.Core: Hexa.Core is our implementation of the Domain Driven Design Architecture. Also providing a set of helper classes for ASP.Net and WCF development.Minecraft NBT reader: A simple Minecraft NBT reader.MobSoft: MobSoft is silverlight based news related application designed to test the new functionalitities in Silverlight 4netduino Helpers: The 'netduino Helpers' is a C# driver set for common hardware components and features convenient wrappers around complex .Net Micro Framework features such as: Analog joysticks, Real-time clock, 8*8 LED matrix, Shift register, runtime assembly & resource loader, bitmaps, etc.NewsGator Social Connectors for Sharepoint 2010: This project contains social connectors for the NewsGator SharePoint platform and supports sending messages to Twitter and LinkedIn just by putting tags in the text #li for sending to linkedin #tw for sending to twitterNon Profit Contact Relationship Management: A non profit contact relationship management software intended to help those in the non profit arena manage donors, sponsors, and prospects.OpenAGE: OpenAGE, short for Open Advance Game Engine, is aimed at developing a new Advanced Game engine strictly for the PC and Xbox360 gaming System using XNA 4.0, and Visual Studio 2010OpenAutoPoster: OpenAutoPoster automates some of the boring everyday tasks of aggregating, linking and posting that haunts content creators.Phefer WoodTurning Sketcher: Draw out your own turnings before you hit the wood. Import images and trace around them, print them out with the length and width measuresments.Simple Script Interpreter- A simple GPLEX/GPPG (Lex/Yacc) Primer: Simple Script is a simple implementation of an interpreter language built with GPlex and Gppg (Lex/Yacc). It's developed in C#.SP2010Tutorials: Code for learning SharePoint 2010The Social Developer: This is a social developer tool for programmers to create and share projects using the .Net framework and other technologies and integrate it into a socialistic approach of sharing the work load and the resources needed to develop high level applications. Traffic-sign Classification: Traffic sign shape classification and localization.unnamedyet: Experimental! para Investigadores de Sistemas. Objetivo! desarrollar una praxis tal que con un conjunto finito y discreto de términos para describir sea posible auto-demostrar y ejecutar cualquier proposición dada.VSSpeedster - Parallel Builds for VS: Improve the performance of your Visual Studio: - Parallel Builds integrated in visual studioWebservice Xslt Transformer WebPart for SharePoint 2010: The Dynamic Webservice Xslt Transformer WebPart makes it much easier for SharePoint Developers and Administrators to call the webservice and transform the results directly to HTML by providing their own custom xslt. The properties can be set on the webpart by using the UI.WilWaNet.HASH: An ASP.NET MVC web site designed for tracking nutrition for the purposes of losing weight. Tracks calories, fat calories, fat grams and saturated fat along with daily weight and exercise. Includes daily Basic Metabolic Rate calculation and graphing functions.WP7 Try it 01: The first try in wp7WPF TryIt 01: Quan ly Nhan khau WPF ApplicationWX Alerter CAP/XML: NWS Alerter using CAP 1.1 alerting protocol. The goal of this project is to consume weather alerts from the NWS site. The user will select the city or SAME code/zone to watch. As alerts trigger notices will display and info will fill the Alert Tab.

    Read the article

  • Eliminating Downtime During Database Upgrades: A Customer Case Study

    - by irem.radzik(at)oracle.com
    Planned outages, such as database, OS, hardware upgrades and migrations, are a fact of life. Even though they are "planned" and many of them are performed during "off business hours", they can still interrupt operations-- especially for global operations and online businesses. For this reason many IT organizations postpone these critical infrastructure improvement projects, which in turn result in delays in advancing business operations. This week, on Thursday January 13th, we will host a free webcast on this topic, and will feature Oracle GoldenGate's customer Atmos Energy. Atmos Energy implemented Oracle GoldenGate for eliminating downtime during their database upgrade from Oracle Database 8.1.7 to Oracle Database 11.1.0.7. Jos Francis, Lead DBA for Atmos, and Ronald Nedd, Sr. DBA for Atmos, will be presenting their database upgrade project and their solution architecture. Join us at this live webcast and hear from our customer and product management how to eliminate planned outages with Oracle GoldenGate's real-time, heterogeneous data replication capabilities.

    Read the article

  • How to define template directives (from an API perspective)?

    - by Ralph
    Preface I'm writing a template language (don't bother trying to talk me out of it), and in it, there are two kinds of user-extensible nodes. TemplateTags and TemplateDirectives. A TemplateTag closely relates to an HTML tag -- it might look something like div(class="green") { "content" } And it'll be rendered as <div class="green">content</div> i.e., it takes a bunch of attributes, plus some content, and spits out some HTML. TemplateDirectives are a little more complicated. They can be things like for loops, ifs, includes, and other such things. They look a lot like a TemplateTag, but they need to be processed differently. For example, @for($i in $items) { div(class="green") { $i } } Would loop over $items and output the content with the variable $i substituted in each time. So.... I'm trying to decide on a way to define these directives now. Template Tags The TemplateTags are pretty easy to write. They look something like this: [TemplateTag] static string div(string content = null, object attrs = null) { return HtmlTag("div", content, attrs); } Where content gets the stuff between the curly braces (pre-rendered if there are variables in it and such), and attrs is either a Dictionary<string,object> of attributes, or an anonymous type used like a dictionary. It just returns the HTML which gets plunked into its place. Simple! You can write tags in basically 1 line. Template Directives The way I've defined them now looks like this: [TemplateDirective] static string @for(string @params, string content) { var tokens = Regex.Split(@params, @"\sin\s").Select(s => s.Trim()).ToArray(); string itemName = tokens[0].Substring(1); string enumName = tokens[1].Substring(1); var enumerable = data[enumName] as IEnumerable; var sb = new StringBuilder(); var template = new Template(content); foreach (var item in enumerable) { var templateVars = new Dictionary<string, object>(data) { { itemName, item } }; sb.Append(template.Render(templateVars)); } return sb.ToString(); } (Working example). Basically, the stuff between the ( and ) is not split into arguments automatically (like the template tags do), and the content isn't pre-rendered either. The reason it isn't pre-rendered is because you might want to add or remove some template variables or something first. In this case, we add the $i variable to the template variables, var templateVars = new Dictionary<string, object>(data) { { itemName, item } }; And then render the content manually, sb.Append(template.Render(templateVars)); Question I'm wondering if this is the best approach to defining custom Template Directives. I want to make it as easy as possible. What if the user doesn't know how to render templates, or doesn't know that he's supposed to? Maybe I should pass in a Template instance pre-filled with the content instead? Or maybe only let him tamper w/ the template variables, and then automatically render the content at the end? OTOH, for things like "if" if the condition fails, then the template wouldn't need to be rendered at all. So there's a lot of flexibility I need to allow in here. Thoughts?

    Read the article

  • comparing two tables [closed]

    - by sza
    I have two identical table ie all the columns are identical and one of the datatype is Text, one is varchar(255) and the rest are int. Lets say the table name is 'AAAAA'. Table AAAAA was processed and backed up earlier this month. Both the tables were storing data and now the second table is only storing data. I need to find unmatching records from the second table (BBBBB) which is storing data right now and add those records to Table AAAAA. Your help will be highly appreciated. I tried to use 'EXCEPT' but it does not support text datatype.

    Read the article

  • If most of team can't follow the architecture, what do you do?

    - by Chris
    Hi all, I'm working on a greenfields project with two other developers. We're all contractors, and myself and one other just started working on the project while the orginal one has been doing most of the basic framework coding. In the past month, my fellow programmer and I have been just frustrated by the design descisions done by our co-worker. Here's a little background information: The application at face value appeared to be your standard n-layered web application using C# on the 3.5 framework. We have a data layer, business layer and a web interface. But as we got deeper into the project we found some very interesting things that have caused us some troubles. There is a custom data access sqlHelper type base which only accepts dictionary key/valued entries and returns only data tables. There are no entity objects, but there are some massive objects which do everything and then are tossed into session for persitance. The general idea is that the pages (.aspx) don't do anything, while the controls (.ascx) do everything. The general flow is that a client clicks on a button, which goes to a user control base which passes a process request to the 'BLL' class which goes to the page processor, which then goes to a getControlProcessor, which at last actually processes the request. The request itself is made up of a dictionary which is passing a string valued method name, stored procedure name, a control name and possibly a value. All switching of the processing is done by comparing the string values of the control names and method names. Pages are linked together via a common header control that uses a combination of javascript and tables to create a hyperlink effect. And as I found out yesterday, a simple hyperlink between one page and another does not work because of the need to have quite a bit of information in session to determine which control to display on a page. My fellow programmer and I both believe that this is a strange and uncommon approach to web application development. Both of us have been in this business for over five years and neither of us have seen this approach. My question is this, how would we approach our co-worker and voice our concerns and what should we do if he does not want to accept the criteic? We both do not want to insult the work that has been done, but feel that going forward will create a nightmare for development. Thanks for your comments.

    Read the article

  • Hangs on Splash Screen after login (auto-login), how can I fix this?

    - by Davious
    Computer: Toshiba Terca A4 OS: Ubuntu Desktop 10.10 After installing 10.10, the splash screen hangs and the mouse pointer appears. Anyone know what I can do to fix this? ~/.xsession-errors has (nautilus:3190): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed btw, Safe-mode works: I do a Ctrl-Alt-F1 into a command prompt session and run ps aux | grep slave then sudo kill [id of gdm-simple-slave] That killed the session and allowed me to login in safe-mode. Safe-mode works. Then I open a terminal and run ps aux | grep nm- sudo kill -9 [id of nm-applet] nm-applet --sm-disable & to get my internet connection up.

    Read the article

  • How can I activate a Panel-icon via a script (or get its screen co-ordinates; to click it)?

    - by fred.bear
    This question is in the context of Lucid 10.04 desktop (ie. no Unity). I do most screen navigation via the keyboard (not the mouse), so I'm looking for a script solution to re-activating an app which has been "minimized" to the Panel's Notification Area. I'll use Skype as an example. wmctrl allows me enough access to normally-minimized windows, but when Skype is "minimized" to the Notification Area, it simply goes "off the radar" as far as wmctrl is concerned. Bearing in mind that icon positions in the Notification Area can vary, is there some way to determine the screen co-ordinates of Skype's Panel icon, so I can "click" it using xdotool (or a similar utility)? ...or maybe there is a more direct way to activate the "dormant" Skype? ... (and I don't mean the mouse ;) Here is the script, so far. Hopefully it will make clear what I'm trying to do: #!/bin/bash procname="skype-wrapper" windmask="Skype™" if [[ $(pgrep -x -n -c "$procname") == 1 ]] ; then wintitle="$(wmctrl -l |grep "$windmask" |head -n 1 |sed -n "s/^.\+${HOSTNAME} \(.*\)/\1/p")" if [ "$wintitle" = "" ] ; then echo "Click on Skype's Panel-icon to show the main window" ############################################################### # How can I find the screen co-ordinates of Skype's Panel Icon ############################################################### else # Skype is running, and has (at least) one visible window which matches $windmask. Activate it. wmctrl -a "$wintitle" fi else # The process is not currently running. Start it. ("$procname" &) fi

    Read the article

  • Why is it taking so long to open the Ubuntu Help Center?

    - by Agmenor
    When I click on the Help Center Icon in the 'System' menu, it takes more than a minute to launch the program. More than a minute, for a text only program seeming like a website! All my other programs work fine, and I saw this problem also on other computers. Is there a reason for this? Will it be fixed? I think it is an important issue for beginners. As a response to Scaine, the result of the command software-center is the following: Traceback (most recent call last): File "/usr/share/software-center/update-software-center-agent", line 72, in <module> db = xapian.WritableDatabase(pathname, xapian.DB_CREATE_OR_OVERWRITE) File "/usr/lib/python2.6/dist-packages/xapian.py", line 3195, in __init__ _xapian.WritableDatabase_swiginit(self,_xapian.new_WritableDatabase(*args)) xapian.DatabaseLockError: Unable to acquire database write lock on /home/agmenor/.cache/software-center/software-center-agent.db.tmp: already locked 2011-01-11 19:57:24,495 - softwarecenter.app - INFO - software-center-agent finished with status 1

    Read the article

  • Which iPhone ad API has produced the highest revenue for you?

    - by Kyle Humfeld
    This isn't a technical question, but more of a request for advice and empirical/anecdotal data. I'm nearly done writing a free app for iPhone, and I'm at the stage where I'm going to put ads into the app. I've had mixed success in the past with iAd (their fill rates have been atrocious recently, and their payouts have cut by about 75% over the past 4 months or so), and would like to know how much ad revenue you, the community, has seen from the various ad APIs you've used for your iPhone apps. This isn't a request for opinion, i.e. which is 'better', only what kinds of numbers you're seeing. I don't need absolute figures, but 'iAd pays x% higher than AdMob, and y% lower than AdSense' would be extremely helpful to me as I make my decision as to which ad API to integrate into my App. Also, have you had any experience or success with integrating multiple ad APIs into the same app? That's something I'm considering doing in my current iAd-filled apps (particularly my iPad app, which has yet to receive a single impression after nearly 60,000 requests)... something like: 1) Request-from-iAd 2) if that fails, request-from-adSense 3) if that fails, request-from-adMob 4) if that fails, ... etc.

    Read the article

  • Software for video subscription service

    - by Clinton Blackmore
    I'd like to sell instructional videos over the web. Primarily, I'd like uses to subscribe to the site and be allowed access to videos over the internet. Secondarily, I might sell DVDs for those who have poor internet connections or would like a physical copy, or possibly I'd sell eBooks and the like in the future. Regarding the subscriptions: I'd like a system that automatically sends out e-mails when it is time to renew I'd like to be able to offer free trials Users without a free trial or subscription should not be able to access the content Incidentally, I plan to host videos on my current web host and move them to a CDN when volume (and capital) make this a good idea. While I have no intention to go crazy with the DRM, it seems expedient not to directly link to the files -- how can I link to them indirectly? It would be nice to support multiple payment processors -- specifically, I'd like to avoid a PayPal only approach. Are there any web applications (or plugins) you'd recommend for something like this? While I've set up and administered several web technologies, I've never done anything with e-commerce. I see there are possibilities like osCommerce, one friend recommends using WordPress with plugins, and it really appears that for any given CMS, you can graft on components like this, although I imagine that not all are created equal. As I'm not tied to a particular web application (and, while open source software that can run on a LAMP [p=perl, python, php] stack is preferable), I'd like to make a good choice at the beginning.

    Read the article

  • How to count the length (number of lines) of a csv file in Rails?

    - by Mathias
    Hello, I have a form (Rails) which allows me to load a .csv file using the file_field. In the view: <% form_for(:upcsv, :html => {:multipart => true}) do |f| %> <table> <tr> <td><%= f.label("File:") %></td> <td><%= f.file_field(:filename) %></td> </tr> </table> <%= f.submit("Submit") %> <% end %> Clicking Submit redirects me to another page (create.html.erb). The file was loaded fine, and I was able to read the contents just fine in this second page. I am trying to show the number of lines in the .csv file in this second page. My controller (semi-pseudocode): class UpcsvController < ApplicationController def index end def create file = params[:upcsv][:filename] ... #params[:upcsv][:file_length] = file.length # Show number of lines in the file #params[:upcsv][:file_length] = file.size ... end end Both file.length and file.size returns '91' when my file only contains 7 lines. From the Rails documentation that I read, once the Submit button is clicked, Rails creates a temp file of the uploaded file, and the params[:upcsv][:filename] contains the contents of the temp/uploaded file and not the path to the file. And I don't know how to extract the number of lines in my original file. What is the correct way to get the number of lines in the file? My create.html.erb: <table> <tr> <td>File length:</td> <td><%= params[:upcsv][:file_length] %></td> </tr> </table> I'm really new at Rails (just started last week), so please bear with my stupid questions. Thank you!

    Read the article

  • Reference variable to an object instantiated/initialized in another class in Java

    - by Alex
    The reason I'm asking is because I'm getting NullPointerException. I now this is very easy but I'm pretty new programming and find this a bit confusing. So say I have initialized an object in a class and want to access that same object from another class. Like now for instance I'm working on a small Chess game, in my model Game class I have an instance of Board, an object. Board, in turn, has an array of Squares. Square[][]. Game has board, board has Square[][]. Now if I want to access the Square[][] through the object board (in Game) of type Board. Do I just declare a variable with the same name and type or do I have to initialize it again? Board board OR Board board = new Board(); Note, I have already initialized board in the class Game so if I do it again, won't they be two totally different Board objects?

    Read the article

  • How to select only the first rows for each unique value of a column

    - by nuit9
    Let's say I have a table of customer addresses: CName | AddressLine ------------------------------- John Smith | 123 Nowheresville Jane Doe | 456 Evergreen Terrace John Smith | 999 Somewhereelse Joe Bloggs | 1 Second Ave In the table, one customer like John Smith can have multiple addresses. I need the select query for this table to return only first row found where there are duplicates in 'CName'. For this table it should return all rows except the 3rd (or 1st - any of those two addresses are okay but only one can be returned). Is there a keyword I can add to the SELECT query to filter based on whether the server has already seen the column value before?

    Read the article

  • Git ignore all folders apart from

    - by digital
    I want to ignore all the files in my folder structure apart from the following conditions: profiles (and all folders/files recursive) sites/xxx (and all folders/files recursive) Currently my gitignore file looks like: `*` !sites/xxx !sites/xxx/modules !sites/xxx/modules/* !profiles !profiles/xxx !profiles/xxx/* This doesn't allow me to track sites/xxx/modules/new though, is there anyway round this.

    Read the article

  • .NET: Interface Problem VB.net Getter Only Interface

    - by snmcdonald
    Why does an interface override a class definition and violate class encapsulation? I have included two samples below, one in C# and one in VB.net? VB.net Module Module1 Sub Main() Dim testInterface As ITest = New TestMe Console.WriteLine(testInterface.Testable) ''// Prints False testInterface.Testable = True ''// Access to Private!!! Console.WriteLine(testInterface.Testable) ''// Prints True Dim testClass As TestMe = New TestMe Console.WriteLine(testClass.Testable) ''// Prints False ''//testClass.Testable = True ''// Compile Error Console.WriteLine(testClass.Testable) ''// Prints False End Sub End Module Public Class TestMe : Implements ITest Private m_testable As Boolean = False Public Property Testable As Boolean Implements ITest.Testable Get Return m_testable End Get Private Set(ByVal value As Boolean) m_testable = value End Set End Property End Class Interface ITest Property Testable As Boolean End Interface C# using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace InterfaceCSTest { class Program { static void Main(string[] args) { ITest testInterface = new TestMe(); Console.WriteLine(testInterface.Testable); testInterface.Testable = true; Console.WriteLine(testInterface.Testable); TestMe testClass = new TestMe(); Console.WriteLine(testClass.Testable); //testClass.Testable = true; Console.WriteLine(testClass.Testable); } } class TestMe : ITest { private bool m_testable = false; public bool Testable { get { return m_testable; } private set { m_testable = value; } } } interface ITest { bool Testable { get; set; } } } More Specifically How do I implement a interface in VB.net that will allow for a private setter. For example in C# I can declare: class TestMe : ITest { private bool m_testable = false; public bool Testable { get { return m_testable; } private set //No Compile Error here! { m_testable = value; } } } interface ITest { bool Testable { get; } } However, if I declare an interface property as readonly in VB.net I cannot create a setter. If I create a VB.net interface as just a plain old property then interface declarations will violate my encapsulation. Public Class TestMe : Implements ITest Private m_testable As Boolean = False Public ReadOnly Property Testable As Boolean Implements ITest.Testable Get Return m_testable End Get Private Set(ByVal value As Boolean) ''//Compile Error m_testable = value End Set End Property End Class Interface ITest ReadOnly Property Testable As Boolean End Interface So my question is, how do I define a getter only Interface in VB.net with proper encapsulation? I figured the first example would have been the best method. However, it appears as if interface definitions overrule class definitions. So I tried to create a getter only (Readonly) property like in C# but it does not work for VB.net. Maybe this is just a limitation of the language?

    Read the article

  • C++ volatile required when spinning on boost::shared_ptr operator bool()?

    - by JaredC
    I have two threads referencing the same boost::shared_ptr: boost::shared_ptr<Widget> shared; On thread is spinning, waiting for the other thread to reset the boost::shared_ptr: while(shared) boost::thread::yield(); And at some point the other thread will call: shared.reset(); My question is whether or not I need to declare the shared pointer as volatile to prevent the compiler from optimizing the call to shared.operator bool() out of the loop and never detecting the change? I know that if I were simply looping on a variable, waiting for it to reach 0 I would need volatile, but I'm not sure if boost::shared_ptr is implemented in such a way that it is not necessary here.

    Read the article

  • DataTrigger to make WPF Button inactive until TextBox has value

    - by JohnB
    I want the Button control's property to be IsEnabled="False" until a value is entered into a TextBox in the Window. Code so far: <Button Content="Click Me" Name="ClickMe" VerticalAlignment="Top" Click="ClickMe_Click"> <Button.Style> <Style> <Style.Triggers> <DataTrigger Binding="{Binding ElementName=textBox, Path=Length}" <!-- or even: Binding="{Binding Path=textBox.Length}" --> Value="0"> <Setter Property="Button.IsEnabled" Value="false" /> </DataTrigger> </Style.Triggers> </Style> </Button.Style> </Button> Also, is it possible to have this Button control's IsEnabled property be based on 3 different TextBox controls all having values?

    Read the article

  • What /else/ causes this?

    - by Mordachai
    MFC Toolbox Library.lib(SimpleFileIO.obj) : error LNK2005: _wcsnlen already defined in libcmtd.lib(wcslen_s.obj) fatal error LNK1169: one or more multiply defined symbols found This is driving me nuts. Normally, one would get this if the various projects that are a part of their solution do not agree on which CRT to use (single threaded, multi-threaded, release or debug). However, I have been over this thing about 500 times now, and they all agree. Background: this is a VS 2010 project just converted from VS 2008. MFC Toolbox Library.lib is set to compile as a static library, using /MTd, as is the target .exe I am trying to compile in this solution. Further, the solution that this is being converted from (VS 2008) already compiles & links properly!!! So it's not like that there is a disagreement between the two .vcproj's - or at least there wasn't before the conversion. Furthermore, the MFC Toolbox Library is used by about 25 other projects in another solution - and in that solution (Master Build English) it compiles & links against those other projects without complaint in both debug and release targets. I have just spent the last hour going over every single project property for this target project (Cimex Header Viewer) vs. several different target exe projects in Master Build English solution - and I cannot find a difference. They appear to be identical, excepting that they're different names. I've tried doing a clean & build all. I'm simply out of ideas. Does anyone have a thought on what else I might investigate??? I think I'm ready to start chewing glass. :(

    Read the article

  • C# Get/Set Syntax Usage

    - by RoR
    These are declarations for a Person class. protected int ID { get; set; } protected string Title { get; set; } protected string Description { get; set; } protected TimeSpan jobLength { get; set; } How do I go about using the get/set? In main, I instantiate a Person Tom = new Person(); How does Tom.set/get?? I am use to doing C++ style where you just write out the int getAge() and void setAge() functions. But in C# there are shortcuts handling get and set?

    Read the article

  • parser 2.1 and 2.2

    - by yaniv
    hi i using the follwing Code to retrive XML element text using getElementsByTagName this code success in 2.2 and Failed in 2.1 any idea ? URL metafeedUrl = new URL("http://x..../Y.xml") URLConnection connection ; connection= metafeedUrl.openConnection(); HttpURLConnection httpConnection = (HttpURLConnection)connection ; int resposnseCode= httpConnection.getResponseCode() ; if (resposnseCode == HttpURLConnection.HTTP_OK) { InputStream in = httpConnection.getInputStream(); DocumentBuilderFactory dbf ; dbf = DocumentBuilderFactory.newInstance(); DocumentBuilder db = dbf.newDocumentBuilder(); // Parse the Earthquakes entry Document dom = db.parse(in); Element docEle = dom.getDocumentElement(); //ArrayList<Album> Albums = new ArrayList<Album>(); /* Returns a NodeList of all descendant Elements with a given tag name, in document order.*/ NodeList nl = docEle.getElementsByTagName("entry"); if (nl!=null && nl.getLength() > 0) { for (int i = 0; i < nl.getLength(); i++) { Element entry = (Element)nl.item(i); /* Now on every property in Entry **/ Element title =(Element)entry.getElementsByTagName("title").item(0); *Here i Get an Error* String album_Title = title.getTextContent(); Element id =(Element)entry.getElementsByTagName("id").item(0); String album_id = id.getTextContent(); //

    Read the article

  • how to avoid storing several times a repeated field of a Symfony form?

    - by user454760
    Hello everybody, I am working with Symfony 1.4 and Doctrine. I have a model A with an email field. The form of A displays an input in which the user should insert the email correctly. But as everybody knows, sometimes they don't do it. To fix this I have inserted an extra field in the model (and in the form), called *repeat_email* to prevent the misspellings. Then, in the validation process, after validating all the fields, i use a global validator to compare the data of the two fields. This works, but I don't want to have the email stored two times in the database (I don't want the *repeat_email*). Is there any mechanism to use it in the validation process, but not to store it in the database? Thanks,

    Read the article

  • Caching queries in Django

    - by dolma33
    In a django project I only need to cache a few queries, using, because of server limitations, a cache table instead of memcached. One of those queries looks like this: Let's say I have a Parent object, which has a lot of Child objects. I need to store the result of the simple query parent.childs.all(). I have no problem with that, and everything works as expected with some code like key = "%s_children" %(parent.name) value = cache.get(key) if value is None: cache.set(key, parent.children.all(), CACHE_TIMEOUT) value = cache.get(key) But sometimes, just sometimes, the cache.set does nothing, and, after executing cache.set, cache.get(key) keeps returning None. After some test, I've noticed that cache.set is not working when parent.children.all().count() has higher values. That means that if I'm storing inside of key (for example) 600 children objects, it works fine, but it wont work with 1200 children. So my question is: is there a limit to the data that a key could store? How can I override it? Second question: which way is "better", the above code, or the following one? key = "%s_children" %(parent.name) value = cache.get(key) if value is None: value = parent.children.all() cache.set(key, value, CACHE_TIMEOUT) The second version won't cause errors if cache.set doesn't work, so it could be a workaround to my issue, but obviously not a solution. In general, let's forget about my issue, which version would you consider "better"?

    Read the article

  • Using SMO to call Database.ExecuteNonQuery() concurrently?

    - by JimDaniel
    I have been banging my head against the wall trying to figure out how I can run update scripts concurrently against multiple databases in a single SQL Server instance using SMO. Our environments have an ever-increasing number of databases which need updating, and iterating through one at a time is becoming a problem (too slow). From what I understand SMO does not support concurrent operations, and my tests have bore that out. There seems to be shared memory at the Server object level, for things like DataReader context, keeps throwing exceptions such as "reader is already open." I apologize for not having the exact exceptions I am getting. I will try to get them and update this post. I am no expert on SMO and just feeling my way through to be honest. Not really sure I am approaching it the right way, but it's something that has to be done, or our productivity will slow to a crawl. So how would you guys do something like this? Am I using the wrong technology with SMO? All I am wanting to do is execute sql scripts against databases in a single sql server instance in parallel. Thanks for any help you can give, Daniel

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >