Daily Archives

Articles indexed Tuesday December 21 2010

Page 30/33 | < Previous Page | 26 27 28 29 30 31 32 33  | Next Page >

  • Why is this simple hello world code segfaulting?

    - by socks
    Excuse the beginner level of this question. I have the following simple code, but it does not seem to run. It gets a segmentation fault. If I replace the pointer with a simple call to the actual variable, it runs fine... I'm not sure why. struct node { int x; struct node *left; struct node *right; }; int main() { struct node *root; root->x = 42; printf("Hello world. %d", root->x); getchar(); return 0; } What is wrong with this code?

    Read the article

  • How can I use splne() with ggplot?

    - by David
    I would like to fit my data using spline(y~x) but all of the examples that I can find use a spline with smoothing, e.g. lm(y~ns(x), df=_). I want to use spline() specifically because I am using this to do the analysis represented by the plot that I am making. Is there a simple way to use spline() in ggplot? I have considered the hackish approach of fitting a line using geom_smooth(aes(x=(spline(y~x)$x, y=spline(y~x)$y)) but I would prefer not to have to resort to this. Thanks!

    Read the article

  • What gems/plugins can be used for Unsubscribe support in Rails?

    - by user550575
    What gems/plugins that make it easy to add a tamper-resistant unsubscribe link to the bottom of the email a user can click to prevent receiving email those types of emails? The only thing I could find was http://kevinlochner.com/handling-unsubscribe-requests-in-ruby-on-rail which works but is somewhat unsophisticated and lacks features such as which type of emails to unsubscribe from. It also doesnt include the mechanism for users to unsubscribe. We using ActionMailer.

    Read the article

  • Accessing data feed

    - by racket99
    I have a Java program on my desktop which displays financial data gleaned from the web. It is a 3rd party application. What I would like to do is intercept the data before it goes to the Java application and record it into a flat file for the purpose of later data analysis. Is this at all possible? I imagine the data are available and are entering my computer through some port which the Java app picks up and then displays. Help appreciated. Thanks

    Read the article

  • Interview: Am I need to leave a hope for candidate?

    - by Budda
    Today I've interviewed a candidate who didn't answer any question. At all. After 3-4 answers (attempts to answer) for me was obvious: we won't hire him. Would you recommend me to say (definitely in polite form) something like: Sorry you don't meet our requirements? Or just to tell in another way: thank you, that are all my questions for now. Our HR department will let you know if/when we will need another interview session. Probably you see any other option. Thanks.

    Read the article

  • Attaching functions to elements in a loop

    - by user435377
    I have the following HTML and JavaScript it works for the first set of elements when I have a '1' in the selector but when I replace the '1' with an 'i' it doesn't attach itself to any of the elements. Any ideas as to why this might not be working? (the script is meant to add the first 3 columns of each row and display it in the fourth) <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.3/jquery.min.js" type="text/javascript"></script> <script> $(document).ready(function(){ for (i = 2; i <= 14; i++) { $("#Q19_LND_"+i).keyup(function(){ $("#autoSumRow_"+i).val(Number($("#Q19_LND_"+i).val()) + Number($("#Q19_CE_"+i).val()) + Number($("#Q19_SOLSD_"+i).val())); }); $("#Q19_CE_"+i).keyup(function(){ $("#autoSumRow_"+i).val(Number($("#Q19_LND_"+i).val()) + Number($("#Q19_CE_"+i).val()) + Number($("#Q19_SOLSD_"+i).val())); }); $("#Q19_SOLSD_"+i).keyup(function(){ $("#autoSumRow_"+i).val(Number($("#Q19_LND_"+i).val()) + Number($("#Q19_CE_"+i).val()) + Number($("#Q19_SOLSD_"+i).val())); }); } }); </script> </head> <body> <table> <tr> <td><font face="arial" size="-1">Lap Roux-N-Y</font>&nbsp;</td> <td align="center"><input tabindex="1" type="text" name="Q19_LND_1" size="3" value="" id="Q19_LND_1"></td> <td align="center"><input tabindex="2" type="text" name="Q19_CE_1" size="3" value="" id="Q19_CE_1"></td> <td align="center"><input tabindex="3" type="text" name="Q19_SOLSD_1" size="3" value="" id="Q19_SOLSD_1"></td> <td align="center"><input tabindex="4" disabled type="text" name="autoSumRow_1" size="3" value="" id="autoSumRow_1"></td> </tr> <tr> <td nowrap width="1" bgcolor="#006699" colspan="9"><img src="/images/wi/nothing.gif" width="1" height="1"></td> </tr> <tr> <td><font face="arial" size="-1">Lap Esophagectomy</font>&nbsp;</td> <td align="center"><input tabindex="5" type="text" name="Q19_LND_2" size="3" value="" id="Q19_LND_2"></td> <td align="center"><input tabindex="6" type="text" name="Q19_CE_2" size="3" value="" id="Q19_CE_2"></td> <td align="center"><input tabindex="7" type="text" name="Q19_SOLSD_2" size="3" value="" id="Q19_SOLSD_2"></td> <td align="center"><input tabindex="8" disabled type="text" name="autoSumRow_2" size="3" value="" id="autoSumRow_2"></td> </tr> <tr> </table> </body> </html>

    Read the article

  • error of grails project from svn : GroovyObject cannot be resolved

    - by atian25
    when i check out a new grails project from svn, i got some error: 1.The project was not built since its build path is incomplete. Cannot find the class file for groovy.lang.GroovyObject. Fix the build path then try building this project 2.The type groovy.lang.GroovyObject cannot be resolved. It is indirectly referenced from required .class files i had config the grails path, and it can run-app well. but,still error warning.

    Read the article

  • Accessing and encoding of properties files

    - by NoozNooz42
    I'm used to work with properties files, for example from Ant. Where I can simply reference the property file doing something like that: <property file="webapp_DO_NOT_COMMIT.properties"/> (the file is so named because our DVCS is configured as to never commit files containing "DO_NOT_COMMIT" to prevent committing credentials/passwords/etc.) Here's a very simple .properties file example: passwd=brokencleartextpassword Now I want to put some configuration in another, similar, properties file that I need to access from my Java code. How should I go about it? I also have another related question: is the character encoding of .properties file defined by any spec?

    Read the article

  • Trying to run psexec to remote to server and recycle app pool

    - by James
    If I run this from my command prompt it works fine. psexec \ServerName cscript.exe iisapp.vbs /a AppName /r I'm trying to do the same thing with C# console app. I'm using the below code but most of the time the application hangs and doesn't complete, and the few times it does it throws an error code. Am I doing this wrong? Anyone know where I can look up the error or error code? static void RecycleAppPool(string sServer) { Console.Clear(); ProcessStartInfo p = new ProcessStartInfo("psexec.exe", "\\\\" + sServer + " cscript.exe iisapp.vbs /a <AppName> /r"); p.RedirectStandardInput = true; p.UseShellExecute = false; Process.Start(p); } When it completes with error, looks like this "cscript.exe exited with error code -2147024664"

    Read the article

  • Administering Team Foundation Server 2010 Class resource links

    - by John Alexander
    Here are the resource links for the Administering Team Foundation Server 2010 Class from last week in Minneapolis.  Microsoft® Visual Studio® 2010 and Team Foundation Server® 2010 RTM virtual machine for Microsoft® Virtual PC 2007 SP1 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5e13b15a-fd74-4cd7-b53e-bdf9456855bd Microsoft® Visual Studio® 2010 and Team Foundation Server® 2010 RTM virtual machine for Windows Virtual PC http://www.microsoft.com/downloads/en/details.aspx?FamilyID=509c3ba1-4efc-42b5-b6d8-0232b2cbb26e Microsoft® Visual Studio® 2010 and Team Foundation Server® 2010 RTM virtual machine for Windows Server 2008 Hyper-V http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e0198b64-4acb-4709-b07f-359fb4d523bc Customizable process guidance http://blogs.msdn.com/b/allclark/archive/2010/08/12/customizable-process-guidance.aspx The 5 most read Visual Studio ALM help topics on MSDN http://blogs.msdn.com/b/allclark/archive/2010/11/12/the-5-most-read-visual-studio-alm-help-topics-on-msdn.aspx Inside TFS http://visualstudiomagazine.com/Articles/List/Inside-TFS.aspx Testing Topics http://msdn.microsoft.com/en-us/library/dd286594.aspx Blogs http://community.accentient.com http://geekswithblogs.net Branching Guide http://tfsbranchingguideiii.codeplex.com/ Great VSTS blog http://geekswithblogs.net/hinshelm/Default.aspx My Blog :D http://geekswithblogs.net/jalexander/Default.aspx Visual Studio Forums http://bit.ly/fE16u3 TFS Migration and Integration Solutions http://bit.ly/cLaBnT TFS Migration and Integration Tools (VS ALM Rangers) http://bit.ly/9tHWdG TFS Migration and Integration Platform (CodePlex) http://tfsintegration.codeplex.com Team Foundation Server SDK http://code.msdn.microsoft.com/TfsSdk Migrate and Integration Forum http://bit.ly/f4Lnps Team Foundation Server Widgets http://www.tfswidgets.com TFS Sdk http://code.msdn.microsoft.com/TfsSdk TFS Migration and Integration Solutions http://bit.ly/cLaBnT TFS Integration Tools Forum http://bit.ly/f4Lnps TFS Integration Tools http://bit.ly/9tHWdG TFS Integration Platform http://tfsintegration.codeplex.com VS Upgrade Guide http://vs2010upgradeguide.codeplex.com Updating an Upgraded Team Project to Access New Features http://bit.ly/9cCcMP Team Foundation Power Tools http://bit.ly/dfNVQk Team Foundation Administration Tool http://tfsadmin.codeplex.com Using Team Foundation Server Command-Line Tools http://bit.ly/hCyozJ Changing Groups and Permissions with TFSSecurity http://bit.ly/esIjgw Unofficial Prep guide for TFS 2010 Administration Exam (70-512) http://geekswithblogs.net/enriquelima/archive/2010/07/21/unofficial-prep-guide-for-tfs-2010-administration-exam-70-512.aspx Another Prep Guide http://bit.ly/bpO30R Professional Application Lifecycle Management with VS 2010 Book http://bit.ly/9rCIRj Search CodePlex for TFS related apps http://www.codeplex.com/site/search Visual Studio Gallery http://visualstudiogallery.com TFS Widgets http://tfswidgets.com Migrate from Visual SourceSafe http://bit.ly/8XPSRh Team Foundation Server MSSCCI Provider 2010 http://bit.ly/dst1OQ Attrice TFS Sidekicks www.attrice.info/cm/tfs Hosted TFS http://bit.ly/cMZdvp Manually Processing the Team Foundation Server 2010 Data Warehouse and Analysis Services Database http://bit.ly/aG5oEh TFS 2005, 2008 and 2010 Compatibility http://shrinkster.com/1dhj

    Read the article

  • Loading XML file containing leading zeros with SSIS preserving the zeros

    - by Compudicted
    Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

    Read the article

  • Sharing a printer on Windows home network

    - by Jeff
    I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

    Read the article

  • Setting up a VPN tunnel between a Linux box and a Cisco FW

    - by Meni
    Hi. I have a linux box (ubuntu) and I have a service provider that will only allow an IPSEC tunnel connection between his network and my linux box. I have these details from the service provider: Service Provider: Peer IP – Lan on service provider's side - 10.10.10.10/24 Linux box details: Peer IP - Lan - Connection details: Phase1: Sha Aes 128 DH - group x Preshared – Lifetime – 24h Phase2: Sha Aes 128 Lifetime – 1h I am not sure which app I need to install on the linux box that will support this type of connection. Any ideas? Thanks!

    Read the article

  • Connecting to my SMTP server

    - by Joseph Silvashy
    I have a few questions, I just installed SMTP on my Ubuntu server, and I want to know how to connect to it from a different machine... I'm not really clear. I tried: telnet my.servers.ip.address 25 I think it's running on port 25, but I don't know where to find out, its not in the conf file anywhere. Additionally do I need it to be a FDQN? or can I just access my mail server via it's IP address? I know that the service works on the machine because I'm able to echo test | mail -s "test" [email protected] Any help debugging or understanding this would be helpful, thanks guys!

    Read the article

  • Konsole Read/Write Access to PTY Device

    - by Carmen
    When I run something like: $ konsole -e "sleep 30" I get this message Konsole is unable to open a PTY (pseudo teletype). It is likely that this is due to an incorrect configuration of the PTY devices. Konsole needs to have read/write access to the PTY devices. But if I try to run this: $ gnome-terminal -e "sleep 30" Then it is fine, and it does not throw any error. How can I change the read/write access of the Konsole to the PTY devices?

    Read the article

  • nginx proxy pass redirect through load balancer

    - by Brian
    I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

    Read the article

  • yum-updatesd problem

    - by smusumeche
    I am trying to setup yum-updatesd to send email notification when there are updates available to the packages on my system. However, I am not receiving any notifications even though there are updates available (as seen in yum check-update) I have verified that the yum-updatesd service is running. This is my /etc/yum/yum-updatesd.conf: [main] # how often to check for new updates (in seconds) run_interval = 3600 # how often to allow checking on request (in seconds) updaterefresh = 600 # how to send notifications (valid: dbus, email, syslog) emit_via = email email_to = [email protected] email_from = [email protected] # should we listen via dbus to give out update information/check for # new updates dbus_listener = yes # automatically install updates do_update = no # automatically download updates do_download = no # automatically download deps of updates do_download_deps = no

    Read the article

  • Strange stuff in apache log

    - by aL3xa
    Hi lads, I'm building some kind of webapp, and currently the whole thing runs on my machine. I was combing down my logs, and found several "strange" log entries that made me a bit paranoid. Here goes: ***.***.***.** - - [19/Dec/2010:19:47:47 +0100] "\x99\x91g\xca\xa8" 501 1054 **.***.***.** - - [19/Dec/2010:20:14:58 +0100] "<}\xdbe\x86E\x18\xe7\x8b" 501 1054 **.**.***.*** - - [21/Dec/2010:15:28:14 +0100] "J\xaa\x9f\xa3\xdd\x9c\x81\\\xbd\xb3\xbe\xf7\xa6A\x92g'\x039\x97\xac,vC\x8d\x12\xec\x80\x06\x10\x8e\xab7e\xa9\x98\x10\xa7" 501 1054 Bloody hell... what is this?!

    Read the article

  • How to control remote access to Sonicwall VPN beyond passwords?

    - by pghcpa
    I have a SonicWall TZ-210. I want an extremely easy way to limit external remote access to the VPN beyond just username and password, but I do not wish to buy/deploy a OTP appliance because that is overkill for my situation. I also do not want to use IPSec because my remote users are roaming. I want the user to be in physical possession of something, whether that is a pre-configured client with an encrypted key or a certificate .cer/.pfx of some sort. SonicWall used to offer "Certificate Services" for authentication, but apparently discontinued that a long time ago. So, what is everyone using in its place? Beyond the "Fortune 500" expensive solution, how do I limit access to the VPN to only those users who have possession of a certificate file or some other file or something beyond passwords? Thanks.

    Read the article

  • Android software for the system administrator on the move

    - by GruffTech
    My company has over service through Verizon, and AT&T Service in the area is "shoddy" at its best, so I haven't been able to join the "iPhone party" like so many of my fellow system administrators have been able to. That being said, this week finally a phone I like has hit Verizon, the HTC Incredible. (I've been waiting for the Desire or Nexus One, but after seeing spec sheets and reviews, HTC Incredible comes out ahead anyway). So (finally) I'm looking for Android Apps that are "gotta-haves" for system administrators. I've found the bottom three. If there are others you prefer over these let me know. RDP Program - RemoteRDP SSH Client - ConnectBot Nagios - NagMonDroid Reply with your favorite Android App and why!

    Read the article

  • Sendmail is not ignoring MX lookups

    - by daniel
    Hello, I recently learned of the joys of square brackets with SMART_HOST to have sendmail ignore MX lookups. I need this functionality, however, I can't seem to make it persistant. Sending mail with -Am works, however, -bm does not. In the -Am case, the correct mail server is used. In the -bm case, an MX lookup is still being performed. Is there a way to disable MX lookups (or some working alternative)? Thanks

    Read the article

  • Apache Front End....Tomcat back end...SSL question

    - by Jared
    Hi Everyone, Question.... I have Apache setup as my webserver. Tomcat is hooked into Apache via mod_jk, so the user never interacts with Tomcat. I have set up SSL on the Apache Webser...I can hit it with https:// localhost When I try to access my application at ...https://localhost/app I get a directory not found error. Catch is when I go regular http... I can hit it fine... http:// localhost/app What do I have to edit for this connection to work? I have uncommented the AJP connector in server.xml I have added my virtual host to httpd.conf What am I missing? Thanks in advance. Jared

    Read the article

  • NGINX returning 404 error on a valid url

    - by Harrison
    We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

    Read the article

  • Trying to connect simple VB6 ADO to SQL Server 2008

    - by Henry
    We have a VB6 App that -for current purposes - is very basic ADO: Dim a New ADODB.Recorset, set some basic properties like Cursor Location and Lock Type, set a Connection String and a .Source like "Select * from CustomerMaster", and .OPEN - nothing fancy here! Yet, on a new SBS installation with SQL Server 2008 across 2 Servers (one for Apps, the other dedicated to SQL!), it dies/hangs/crashes if you try to run such a Query from anything but the SQL Sever box. Initially, we were using the SQLOLEDB.1 driver, which would crash/hang the entire SQL Server after about 4 such queries (built a simple 6 line App just for this purpose). Then switched to the NATIVE SQL driver, which did allow us unlimited, happy queries - until you did the first Change/Update - THEN it would corrupt the SQL Server if you exited and tried to go back in. All this 'corruption' is happening from the 'App Server' of the SBS pair, and I presume that the App Server (also installed in tandem with the SQL server this week) has the latest MDACs, etc. And running it from a 'lowly XP workstation' is (obviously) no better. ANY ideas??? -Henry

    Read the article

  • DD-WRT - Where's the best place to get a LinkSys WRT54G V1.0?

    - by Giffyguy
    Looking for the initial release of the LinkSys WRT54G, not V1.1 or V2.0 or anything like that. If it comes with DD-WRT pre-installed, even better. That being said, I suppose a side question would be whether SU recommends different hardware. After all, DD-WRT may have been originally built for the WRT54G and the WRT54Gv1.0 may have better hardware than any of the successive models, but it's still fairly dated. Are there newer routers that are more stable or performant with DD-WRT?

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33  | Next Page >