Monthly Archives

Articles indexed in May 2014

Page 35/88 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

  • How to texture voxel terrain without triplanar texturing?

    - by Thelvyn
    How can a voxel terrain (marching cubes) be textured without triplanar mapping ? The goal being to have more artistic freedom. I think, I could unwrap the mesh while extracting the isosurface then use projective painting. But I do not know how to handle terrain modifications without breaking the texture. I also guess that virtual texturing could help here. Links for these matters would be appreciated.

    Read the article

  • Collision detection with heightmap based terrain

    - by Truman's world
    I am developing a 2D tank game. The terrain is generated by Midpoint Displacement Algorithm, so the terrain is represented by an array: index ---> height of terrain [0] ---> 5 [1] ---> 8 [2] ---> 4 [3] ---> 6 [4] ---> 8 [5] ---> 9 ... ... The rendered mountain looks like this: * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 0 1 2 3 4 5 ... I want tanks to be able to move smoothly on the terrain (I mean tanks can rotate according to the height when they move), but the surface of the terrain is not flat, it is polygonal. Can anyone give me some help with collision detection in this situation? Thanks in advance.

    Read the article

  • Optimal Compression for Speech

    - by ashes999
    I'm designing a game that depends heavily on audio; I will have some 300+ speech files (most of them just a word or two long). This can very quickly escalate the size of my final game. What's the optimal way to encode/compress speech files to keep the size minimal without getting audio artifacts? Please address both per-file compression/encoding, and also zipping/compressing the set of all speech files together in your answer. Because I'm not sure which (or combination of both) factors will give me the best results. Edit: I need this to run in Silverlight and Android, so I'm presumably stuck with only MP3 as my option (other than uncompressed wave files).

    Read the article

  • Paypal development. encrypt transactions. php p12

    - by ninchen
    when i take a look at the paypal documentation, they say "Note that the PayPal SDK for PHP does not require SSL encryption". https://developer.paypal.com/docs/classic/api/apiCredentials/#encrypting-your-certificate Is the statement of this phrase, that i don't have to create a p12 certificate when working with php, but use the public_key.pem and paypal_public_key.pem? If yes: Is it secure enough to create the encrypted form input elements without p12 certificate? If no: What do they mean? :-) Before this question came up, i've tested this little programm. http://www.softarea51.com/blog/how-to-integrate-your-custom-shopping-cart-with-paypal-website-payments-standard-using-php/ There is a config file paypal-wps-config.inc.php where i can define the paths to my certificates. // tryed to use // 'paypal_cert.p12 '; $config['private_key_path'] = '/home/folder/.cert/pp/prvkey.pem'; // must match the one you set when you created the private key $config['private_key_password'] = ''; //'my_password'; When i try to use the p12 certificate, openssl_error_string() returns "Could not sign data: error:0906D06C:PEM routines:PEM_read_bio:no start line openssl_pkcs7_sign When i instead use the prvkey.pem without password all works fine. Here is the function, which signs and encrypt the data. function signAndEncrypt($dataStr_, $ewpCertPath_, $ewpPrivateKeyPath_, $ewpPrivateKeyPwd_, $paypalCertPath_) { $dataStrFile = realpath(tempnam('/tmp', 'pp_')); $fd = fopen($dataStrFile, 'w'); if(!$fd) { $error = "Could not open temporary file $dataStrFile."; return array("status" => false, "error_msg" => $error, "error_no" => 0); } fwrite($fd, $dataStr_); fclose($fd); $signedDataFile = realpath(tempnam('/tmp', 'pp_')); **// here the error came from** if(!@openssl_pkcs7_sign( $dataStrFile, $signedDataFile, "file://$ewpCertPath_", array("file://$ewpPrivateKeyPath_", $ewpPrivateKeyPwd_), array(), PKCS7_BINARY)) { unlink($dataStrFile); unlink($signedDataFile); $error = "Could not sign data: ".openssl_error_string(); return array("status" => false, "error_msg" => $error, "error_no" => 0); } unlink($dataStrFile); $signedData = file_get_contents($signedDataFile); $signedDataArray = explode("\n\n", $signedData); $signedData = $signedDataArray[1]; $signedData = base64_decode($signedData); unlink($signedDataFile); $decodedSignedDataFile = realpath(tempnam('/tmp', 'pp_')); $fd = fopen($decodedSignedDataFile, 'w'); if(!$fd) { $error = "Could not open temporary file $decodedSignedDataFile."; return array("status" => false, "error_msg" => $error, "error_no" => 0); } fwrite($fd, $signedData); fclose($fd); $encryptedDataFile = realpath(tempnam('/tmp', 'pp_')); if(!@openssl_pkcs7_encrypt( $decodedSignedDataFile, $encryptedDataFile, file_get_contents($paypalCertPath_), array(), PKCS7_BINARY)) { unlink($decodedSignedDataFile); unlink($encryptedDataFile); $error = "Could not encrypt data: ".openssl_error_string(); return array("status" => false, "error_msg" => $error, "error_no" => 0); } unlink($decodedSignedDataFile); $encryptedData = file_get_contents($encryptedDataFile); if(!$encryptedData) { $error = "Encryption and signature of data failed."; return array("status" => false, "error_msg" => $error, "error_no" => 0); } unlink($encryptedDataFile); $encryptedDataArray = explode("\n\n", $encryptedData); $encryptedData = trim(str_replace("\n", '', $encryptedDataArray[1])); return array("status" => true, "encryptedData" => $encryptedData); } // signAndEncrypt } // PPCrypto The main questions: 1. Is it possible to use p12 cert with php, or is it secure enough to work without it? 2. Why i become an error when using openssl_pkcs7_sign Please help. Greetings ninchen

    Read the article

  • Callback function and function pointer trouble in C++ for a BST

    - by Brendon C.
    I have to create a binary search tree which is templated and can deal with any data types, including abstract data types like objects. Since it is unknown what types of data an object might have and which data is going to be compared, the client side must create a comparison function and also a print function (because also not sure which data has to be printed). I have edited some C code which I was directed to and tried to template, but I cannot figure out how to configure the client display function. I suspect variable 'tree_node' of class BinarySearchTree has to be passed in, but I am not sure how to do this. For this program I'm creating an integer binary search tree and reading data from a file. Any help on the code or the problem would be greatly appreciated :) Main.cpp #include "BinarySearchTreeTemplated.h" #include <iostream> #include <fstream> #include <string> using namespace std; /*Comparison function*/ int cmp_fn(void *data1, void *data2) { if (*((int*)data1) > *((int*)data2)) return 1; else if (*((int*)data1) < *((int*)data2)) return -1; else return 0; } static void displayNode() //<--------NEED HELP HERE { if (node) cout << " " << *((int)node->data) } int main() { ifstream infile("rinput.txt"); BinarySearchTree<int> tree; while (true) { int tmp1; infile >> tmp1; if (infile.eof()) break; tree.insertRoot(tmp1); } return 0; } BinarySearchTree.h (a bit too big to format here) http://pastebin.com/4kSVrPhm

    Read the article

  • IntelliJ IDEA non standard caret behaviour

    - by Vaat666
    I have an issue with IntelliJ IDEA when selecting a big amount of text, and I cannot find the parameter to set to change that. Here is an example of the situation: My caret is on line 3 I scroll with the mouse wheel towards line 300 I press ctrl + shift I press the left button of the mouse Such an action would result in the text from line 3 to 300 being selected in all common editors (even in MS-Word I think), but not in IntelliJ. Do you know how to set this right? Thanks!

    Read the article

  • How do I delete files in a class?

    - by user3682906
    I want to have a CRUD management on my gallery but I have no idea how. I have searched the internet but I did not find what I was looking for. This is my class: class Gallery { public function renderImages($map) { $images = ""; foreach (glob($map ."*.{jpeg,jpg,png,gif}", GLOB_BRACE) as $image){ $images .= "<a href='".$image."' data-lightbox='afbeelding'><img src='".$image."' class='thumbnail'></img></a>"; } return $images; } } and this is my gallery: <div class="gallery"> <center> <a href="index.php">Back:</a> <style> body { margin:0; padding:0; background:#efefef; font-family: "Helvetica Neue", helvetica, arial, sans-serif; color: black; text-align:center; /* used to center div in IE */ } </style> <?php $gallery = new Gallery(); echo $gallery -> renderImages("../images/"); $connection = new DatabaseConnection(); $render = new RenderData(); $page = 1; if(isset($_GET['page'])) { $check = new CheckData(); if($check->PageCheck($_GET['page'])) { $page = $_GET['page']; } } ?> <table> <div id="Intro"> <tr> <td>Hieronder kan je uploaden.</td> </tr> </div> <tr> <td>Max. 500000000Bytes</td> </tr> <tr> <form action="pages/upload_file.php" method="post" enctype="multipart/form-data"> <td><label for="file">Filename:</label></td> </tr> <tr> <td><input type="file" name="file" id="file"></td> </tr> <tr> <td><input type="submit" name="submit" value="Submit"></td> </tr> <tr> <td><input type="submit" name="delete" value="Delete"></td> </tr> </form> </table> How do I make a CRUD management on this? I want to select the photo and then delete it from my computer. I hope you guys can help me out...

    Read the article

  • Passing dynamic string in hyperlink as parameter in jsp

    - by user3660263
    I am trying to pass a dynamic string builder variable in jsp I am generating a string through code. String Builder variable has some value but i am not able to pass it in at run time.It doesn't get the value. CODE FOR VARIABLE <% StringBuilder sb=new StringBuilder(""); if(request.getAttribute("Brand")!=null) { String Brand[]=(String[])request.getAttribute("Brand"); for(String brand:Brand) { sb.append("Brand="); sb.append(brand); sb.append("&&"); } } if(request.getAttribute("Flavour")!=null) { String Flavour[]=(String[])request.getAttribute("Flavour"); for(String flavour:Flavour) { sb.append(flavour); sb.append("&&"); } sb.trimToSize(); pageContext.setAttribute("sb", sb); } out.print("this is string"+sb); %> CODE FOR HYPERLINK <a href="Filter_Products?${sb}page=${currentPage + 1}" style="color: white;text-decoration: none;">Next</a></td>

    Read the article

  • Putting li's into rows

    - by panthro
    I have a long list of li's. <ul> <li> <img src="test.jpg"> </li> <li> <img src="test.jpg"> </li> //etc Each li has this styling: width: 10%; display: inline-block; vertical-align: middle; When I get to more than 10 li's in a row, they go on to the next row. Is this the correct way to do it? or should I wrap each 10 li's into something that breaks the line? What the best/correct method? i intialy chose this method as it would be easily to loop out data from a database.

    Read the article

  • mvc - how to avoid log out when refresh a page

    - by user235973457
    I have built the MVC application with WCF service. The major problem I have experienced with refreshing page. I have created a login page with session (username and password). But when you refresh the home page by pressing F5, it would automatically log out. That is my problem. I need to stay the home page after refresh. I have been googling around to find a solution but it seems not helpful. Any idea? Your advise or code example much appreciated.

    Read the article

  • Simple html page using Bootstrap

    - by Athashri
    I am writing a simple HTML page using the Twitter Bootstrap. But the navbar and links are rendered as normal HTML on the browser. I have referred to multiple sites but the same steps are given everywhere. I am not sure where I am going wrong. Code: <!DOCTYPE HTML> <html> <head> <meta charset="utf-8"> <link rel= "stylesheet" href= "css/bootstrap.css" type="text/css"> <title> Bootstrap example</title> </head> <body> <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.0/jquery.min.js"></script> <script src="js/bootstrap.js"></script> <h1>Hello, world!</h1> <div class ="container"> <h1><a href="#">Bootstrap Site</a></h1> <div class="navbar"> <div class="navbar-inner"> <div class="container"> <ul class="nav"> <li class="active"><a href="#">Home</a></li> <li><a href="#">Projects</a></li> <li><a href="#">Services</a></li> <li><a href="#">Downloads</a></li> <li><a href="#">About</a></li> <li><a href="#">Contact</a></li> </ul> </div> </div> </div> </div> </body> </html>

    Read the article

  • How to kill android application using android code?

    - by Natarajan M
    I am develoing small android application in eclipse. In that project i kill the running process in android, i got the Permission Denial error. how can i solve this problem in android. Anybody help for this problem.... THIS IS MY CODE package com.example.nuts; import java.util.Iterator; import java.util.List; import android.app.Activity; import android.app.ActivityManager; import android.app.ActivityManager.RunningAppProcessInfo; import android.content.Context; import android.content.pm.PackageManager; import android.os.Bundle; import android.telephony.SmsManager; import android.widget.Toast; import android.*; public class killprocess extends Activity { SmsManager smsManager = SmsManager.getDefault(); Recivesms rms=new Recivesms(); String Number=""; int pid=0; String appname=""; protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); try { Number=Recivesms.senderNum; pid=Integer.parseInt(Recivesms.struid); appname=getAppName(pid); Toast.makeText(getBaseContext(),"App Name is "+appname, Toast.LENGTH_LONG).show(); ActivityManager am = (ActivityManager) getSystemService(Activity.ACTIVITY_SERVICE); List<RunningAppProcessInfo> processes = am.getRunningAppProcesses(); if (processes != null){ for (int i=0; i<processes.size(); i++){ RunningAppProcessInfo temp = processes.get(i); String pName = temp.processName; if (pName.equals(appname)) { Toast.makeText(getBaseContext(),"App Name is matched "+appname+" "+pName, Toast.LENGTH_LONG).show(); int pid1 = android.os.Process.getUidForName(pName); //android.os.Process.killProcess(pid1); am.killBackgroundProcesses(pName); Toast.makeText(getBaseContext(), "Killed successfully....", Toast.LENGTH_LONG).show(); } } } smsManager.sendTextMessage(Number, null,"Your process Successfully killed..." , null,null); }catch(Exception e) { Toast.makeText(getBaseContext(),e.getMessage(), Toast.LENGTH_LONG).show(); } } private String getAppName(int Pid) { String processName = ""; ActivityManager am = (ActivityManager)this.getSystemService(ACTIVITY_SERVICE); List l = am.getRunningAppProcesses(); Iterator i = l.iterator(); PackageManager pm = this.getPackageManager(); while(i.hasNext()) { ActivityManager.RunningAppProcessInfo info = (ActivityManager.RunningAppProcessInfo)(i.next()); try { if(info.pid == Pid) { CharSequence c = pm.getApplicationLabel(pm.getApplicationInfo(info.processName, PackageManager.GET_META_DATA)); //Log.d("Process", "Id: "+ info.pid +" ProcessName: "+ info.processName +" Label: "+c.toString()); //processName = c.toString(); processName = info.processName; } } catch(Exception e) { //Log.d("Process", "Error>> :"+ e.toString()); } } return processName; } } After executing the code. i got the following error... Permission Denial: killBackgroundProcess() from pid=894, uid=10052 requires android.permission.KILL_BACKGROUND_PROCESSES Also i put the following line on manifest file <uses-permission android:name="android.permission.KILL_BACKGROUND_PROCESS" /> Anybody help for how to solve this problem... Thanking you....

    Read the article

  • Why baseclass calls method of subclass?

    - by twlkyao
    I encounter some code like the following: BaseClass: public class BaseClass { String name = "Base"; public BaseClass() { printName(); } public void printName() { System.out.println(name + "——Base"); } } DrivedClass: public class SubClass extends BaseClass { String name = "Sub"; public SubClass() { printName(); } public void printName() { System.out.println(name + "——Sub"); } public static void main(String[] args) { new SubClass(); } } When run the code, the output is: null——Sub Sub——Sub while it should be: Base——Base Sub——Sub I wonder why the BaseClass constructor calls the SubClass method, can anybody explain this? Thanks in advance.

    Read the article

  • How to merge two different Makefiles?

    - by martijnn2008
    I have did some reading on "Merging Makefiles", one suggest I should leave the two Makefiles separate in different folders [1]. For me this look counter intuitive, because I have the following situation: I have 3 source files (main.cpp flexibility.cpp constraints.cpp) one of them (flexibility.cpp) is making use of the COIN-OR Linear Programming library (Clp) When installing this library on my computer it makes sample Makefiles, which I have adjust the Makefile and it currently makes a good working binary. # Copyright (C) 2006 International Business Machines and others. # All Rights Reserved. # This file is distributed under the Eclipse Public License. # $Id: Makefile.in 726 2006-04-17 04:16:00Z andreasw $ ########################################################################## # You can modify this example makefile to fit for your own program. # # Usually, you only need to change the five CHANGEME entries below. # ########################################################################## # To compile other examples, either changed the following line, or # add the argument DRIVER=problem_name to make DRIVER = main # CHANGEME: This should be the name of your executable EXE = clp # CHANGEME: Here is the name of all object files corresponding to the source # code that you wrote in order to define the problem statement OBJS = $(DRIVER).o constraints.o flexibility.o # CHANGEME: Additional libraries ADDLIBS = # CHANGEME: Additional flags for compilation (e.g., include flags) ADDINCFLAGS = # CHANGEME: Directory to the sources for the (example) problem definition # files SRCDIR = . ########################################################################## # Usually, you don't have to change anything below. Note that if you # # change certain compiler options, you might have to recompile the # # COIN package. # ########################################################################## COIN_HAS_PKGCONFIG = TRUE COIN_CXX_IS_CL = #TRUE COIN_HAS_SAMPLE = TRUE COIN_HAS_NETLIB = #TRUE # C++ Compiler command CXX = g++ # C++ Compiler options CXXFLAGS = -O3 -pipe -DNDEBUG -pedantic-errors -Wparentheses -Wreturn-type -Wcast-qual -Wall -Wpointer-arith -Wwrite-strings -Wconversion -Wno-unknown-pragmas -Wno-long-long -DCLP_BUILD # additional C++ Compiler options for linking CXXLINKFLAGS = -Wl,--rpath -Wl,/home/martijn/Downloads/COIN/coin-Clp/lib # C Compiler command CC = gcc # C Compiler options CFLAGS = -O3 -pipe -DNDEBUG -pedantic-errors -Wimplicit -Wparentheses -Wsequence-point -Wreturn-type -Wcast-qual -Wall -Wno-unknown-pragmas -Wno-long-long -DCLP_BUILD # Sample data directory ifeq ($(COIN_HAS_SAMPLE), TRUE) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) CXXFLAGS += -DSAMPLEDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatasample`\" CFLAGS += -DSAMPLEDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatasample`\" else CXXFLAGS += -DSAMPLEDIR=\"\" CFLAGS += -DSAMPLEDIR=\"\" endif endif # Netlib data directory ifeq ($(COIN_HAS_NETLIB), TRUE) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) CXXFLAGS += -DNETLIBDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatanetlib`\" CFLAGS += -DNETLIBDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatanetlib`\" else CXXFLAGS += -DNETLIBDIR=\"\" CFLAGS += -DNETLIBDIR=\"\" endif endif # Include directories (we use the CYGPATH_W variables to allow compilation with Windows compilers) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) INCL = `PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --cflags clp` else INCL = endif INCL += $(ADDINCFLAGS) # Linker flags ifeq ($(COIN_HAS_PKGCONFIG), TRUE) LIBS = `PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --libs clp` else ifeq ($(COIN_CXX_IS_CL), TRUE) LIBS = -link -libpath:`$(CYGPATH_W) /home/martijn/Downloads/COIN/coin-Clp/lib` libClp.lib else LIBS = -L/home/martijn/Downloads/COIN/coin-Clp/lib -lClp endif endif # The following is necessary under cygwin, if native compilers are used CYGPATH_W = echo # Here we list all possible generated objects or executables to delete them CLEANFILES = clp \ main.o \ flexibility.o \ constraints.o \ all: $(EXE) .SUFFIXES: .cpp .c .o .obj $(EXE): $(OBJS) bla=;\ for file in $(OBJS); do bla="$$bla `$(CYGPATH_W) $$file`"; done; \ $(CXX) $(CXXLINKFLAGS) $(CXXFLAGS) -o $@ $$bla $(LIBS) $(ADDLIBS) clean: rm -rf $(CLEANFILES) .cpp.o: $(CXX) $(CXXFLAGS) $(INCL) -c -o $@ `test -f '$<' || echo '$(SRCDIR)/'`$< .cpp.obj: $(CXX) $(CXXFLAGS) $(INCL) -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(SRCDIR)/$<'; fi` .c.o: $(CC) $(CFLAGS) $(INCL) -c -o $@ `test -f '$<' || echo '$(SRCDIR)/'`$< .c.obj: $(CC) $(CFLAGS) $(INCL) -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(SRCDIR)/$<'; fi` The other Makefile compiles a lot of code and makes use of bison and flex. This one is also made by someone else. I am able to alter this Makefile when I want to add some code. This Makefile also makes a binary. CFLAGS=-Wall LDLIBS=-LC:/GnuWin32/lib -lfl -lm LSOURCES=lex.l YSOURCES=grammar.ypp CSOURCES=debug.cpp esta_plus.cpp heap.cpp main.cpp stjn.cpp timing.cpp tmsp.cpp token.cpp chaining.cpp flexibility.cpp exceptions.cpp HSOURCES=$(CSOURCES:.cpp=.h) includes.h OBJECTS=$(LSOURCES:.l=.o) $(YSOURCES:.ypp=.tab.o) $(CSOURCES:.cpp=.o) all: solver solver: CFLAGS+=-g -O0 -DDEBUG solver: $(OBJECTS) main.o debug.o g++ $(CFLAGS) -o $@ $^ $(LDLIBS) solver.release: CFLAGS+=-O5 solver.release: $(OBJECTS) main.o g++ $(CFLAGS) -o $@ $^ $(LDLIBS) %.o: %.cpp g++ -c $(CFLAGS) -o $@ $< lex.cpp: lex.l grammar.tab.cpp grammar.tab.hpp flex -o$@ $< %.tab.cpp %.tab.hpp: %.ypp bison --verbose -d $< ifneq ($(LSOURCES),) $(LSOURCES:.l=.cpp): $(YSOURCES:.y=.tab.h) endif -include $(OBJECTS:.o=.d) clean: rm -f $(OBJECTS) $(OBJECTS:.o=.d) $(YSOURCES:.ypp=.tab.cpp) $(YSOURCES:.ypp=.tab.hpp) $(YSOURCES:.ypp=.output) $(LSOURCES:.l=.cpp) solver solver.release 2>/dev/null .PHONY: all clean debug release Both of these Makefiles are, for me, hard to understand. I don't know what they exactly do. What I want is to merge the two of them so I get only one binary. The code compiled in the second Makefile should be the result. I want to add flexibility.cpp and constraints.cpp to the second Makefile, but when I do. I get the problem following problem: flexibility.h:4:26: fatal error: ClpSimplex.hpp: No such file or directory #include "ClpSimplex.hpp" So the compiler can't find the Clp library. I also tried to copy-paste more code from the first Makefile into the second, but it still gives me that same error. Q: Can you please help me with merging the two makefiles or pointing out a more elegant way? Q: In this case is it indeed better to merge the two Makefiles? I also tried to use cmake, but I gave upon that one quickly, because I don't know much about flex and bison.

    Read the article

  • Draw LINE_STRIP with Unity

    - by Boozzz
    For a new project I am thinking about whether to use OpenGL or Unity3d. I have a bit of experience with OpenGL, but I am completely new to Unity. I already read through the Unity documentation and tutorials on the Unity Website. However, I could not find a way to draw a simple Line-Strip with Unity. In the following example (C#, OpenGL/SharpGL) I draw a round trajectory from a predifined point to an obstacle, which can be imagined as a divided circle with midpoint [cx,cy] and radius r. The position (x-y coordinates) of the obstacle is given by obst_x and obst_y. Question 1: How could I do the same with Unity? Question 2: In my new project, I will have to draw quite a lot of such geometric primitives. Does it make any sense to use Unity for those things? void drawCircle(float cx, float cy, float r, const float obst_x, const float obst_y) { float theta = 0.0f, pos_x, pos_y, dist; const float delta = 0.1; glBegin(GL_LINE_STRIP); while (theta < 180) { theta += delta; //get the current angle float x = r * cosf(theta); //calculate the x component float y = r * sinf(theta); //calculate the y component pos_x = x + cx; //calculate current x position pos_y = y + cy; //calculate current y position //calculate distance from current vertex to obstacle dist = sqrt(pow(pos_x - obst_x) + pow(pos_y - obst_y)); //check if current vertex intersects with obstacle if dist <= 0 { break; //stop drawing circle } else { glVertex2f(pos_x, pos_y); //draw vertex } } glEnd(); }

    Read the article

  • which type is best for three radiobuttons?

    - by Manog
    Maybe you consider this question trivial but im just curious what is your opinion. I have three radiobuttons. "Show blue", "Show red" and "Show all". I did it with nullable boolean. There is collumn in database where blue is 0 and red is 1 so in metode i have to translate bool to int to compare those values (i do it in c#).Of course it works, but i wonder if it is the best solution. And question is wich type is best in this case? nullable bool, int, or maybe string?

    Read the article

  • How to keep .cproject local to each user while working collaboratively through git

    - by Don't panic
    I have a C++ project that I am working on with several other people. Some of us have Macs with OSX and some of us have PCs with either Windows 7 or Windows 8.1. We are currently using eclipse to edit the project and git for version control. The problem is that whenever you change property settings on one team member's computer the .cproject file is updated. Because different configurations/ file extensions are used across OSX and Windows we want the .cproject file to remain local. We have tried untracking .cproject through a gitignore for the .cproject file, but that just removes the .cproject file from the repository all together. We have also tried setting up an assumed-unchanged for .cproject but if .cproject is changed all this leads to is the need to manually deal with conflicts and updates. Is there any way to keep the file in the repository, but only change it locally? Ie merging would not update the .cproject file.

    Read the article

  • Not able to get data from Json completely

    - by Abhinav Raja
    i am getting JSON data from http://abinet.org/?json=1 and displaying the titles in a ListView. the code is working fine but the problem is, it is skipping few titles in my ListView and one title is being repeated. You can see the json data from url given above by copy paste it in JSON editor online http://www.jsoneditoronline.org/ i want titles in the "posts" array to be displayed in ListView, however it is being displayed like this: if you see the JSON data from the link above, its missing like 3 titles (they should come between the first and second title) and 5th title is being repeated. Dont know why this is happening. What minor adjustments i need to do? Please help me. this is my code : public class MainActivity extends Activity { // URL to get contacts JSON private static String url = "http://abinet.org/?json=1"; // JSON Node names private static final String TAG_POSTS = "posts"; static final String TAG_TITLE = "title"; private ProgressDialog pDialog; JSONArray contacts = null; TextView img_url; ArrayList<HashMap<String, Object>> contactList; ListView lv; LazyAdapter adapter; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); lv = (ListView) findViewById(R.id.newslist); contactList = new ArrayList<HashMap<String, Object>>(); new GetContacts().execute(); } private class GetContacts extends AsyncTask<Void, Void, Void> { protected void onPreExecute() { super.onPreExecute(); // Showing progress dialog pDialog = new ProgressDialog(MainActivity.this); pDialog.setMessage("Please wait..."); pDialog.setCancelable(false); pDialog.show(); } protected Void doInBackground(Void... arg0) { // Making a request to url and getting response JSONParser jParser = new JSONParser(); // Getting JSON from URL JSONObject jsonObj = jParser.getJSONFromUrl(url); // if (jsonStr != null) { try { // Getting JSON Array node contacts = jsonObj.getJSONArray(TAG_POSTS); // looping through All Contacts for (int i = 0; i < contacts.length(); i++) { // JSONObject c = contacts.getJSONObject(i); JSONObject posts = contacts.getJSONObject(i); String title = posts.getString(TAG_TITLE).replace("&#8217;", "'"); JSONArray attachment = posts.getJSONArray("attachments"); for (int j = 0; j< attachment.length(); j++){ JSONObject obj = attachment.getJSONObject(j); JSONObject image = obj.getJSONObject("images"); JSONObject image_small = image.getJSONObject("thumbnail"); String imgurl = image_small.getString("url"); HashMap<String, Object> contact = new HashMap<String, Object>(); contact.put("image_url", imgurl); contact.put(TAG_TITLE, title); contactList.add(contact); } } } catch (JSONException e) { e.printStackTrace(); } return null; } @Override protected void onPostExecute(Void result) { super.onPostExecute(result); // Dismiss the progress dialog if (pDialog.isShowing()) pDialog.dismiss(); adapter=new LazyAdapter(MainActivity.this, contactList); lv.setAdapter(adapter); } } } this is my JsonParser class (although its not required): public JSONParser() { } public JSONObject getJSONFromUrl(String url) { // Making HTTP request try { // defaultHttpClient DefaultHttpClient httpClient = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(url); HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); StringBuilder sb = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { sb.append(line + "n"); } is.close(); json = sb.toString(); } catch (Exception e) { Log.e("Buffer Error", "Error converting result " + e.toString()); } // try parse the string to a JSON object try { jObj = new JSONObject(json); } catch (JSONException e) { Log.e("JSON Parser", "Error parsing data " + e.toString()); } // return JSON String return jObj; } } and this is adapter class: public class LazyAdapter extends BaseAdapter { private Activity activity; private ArrayList<HashMap<String, Object>> data; private static LayoutInflater inflater=null; public LazyAdapter(Activity a,ArrayList<HashMap<String, Object>> d) { activity = a; data=d; inflater = (LayoutInflater)activity.getSystemService(Context.LAYOUT_INFLATER_SERVICE); } public int getCount() { return data.size(); } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { View vi=convertView; if(convertView==null) vi = inflater.inflate(R.layout.third_row, null); TextView title = (TextView)vi.findViewById(R.id.headline3); // title SmartImageView iv = (SmartImageView) vi.findViewById(R.id.imageicon); HashMap<String, Object> song = new HashMap<String, Object>(); song = data.get(position); // Setting all values in listview title.setText((CharSequence) song.get(MainActivity.TAG_TITLE)); iv.setImageUrl((String) song.get("image_url")); thumb_image); return vi; } } Please help me. I am stuck at this for more than a week now. I think there is just something to be changed in my MainActivity class.

    Read the article

  • Can't authenticate mobile client with node.js (using passport.js)

    - by Pazinio
    I'm trying to build some CRUD application with node.js as a back-end API (express) and web-app (backbone) and mobile client (native android) as front-ends.(I'm node.js beginner) My server solution is based on the following great tutorial 'easy-node-authentication'. In my android app I have managed to get the user Google-Token after I completed the authentication step with Google Plus SDK.(mobile to google-plus directly request). I'm trying to understand and find right and elegant way to re-use a given google-token and authenticate again my android user through Google-Plus account to ensure the mobile client holds real token, then add a new entry (id, token, email, name) to my users table DB within my node back-end. The question is: what should be my next step in case I want to keep my back-end without changes? should I send a GET request with the token as a cookie to /auth/google? maybe to /auth/google/callback? another URL? Does this make sense at all? Please note: I'm aware to the fact the mentioned above 'easy-node-auth' solution is based on sessions and cookies. having said that, i'm still trying to understand if there is a convenient way to integrate both (android and node) as it works good for my web-app and node. Thanks in advance.

    Read the article

  • Kendo UI, searchable Combobox

    - by user2083524
    I am using the free Kendo UI Core Framework. I am looking for a searchable Combobox that fires the sql after inserting, for example, 2 letters. Behind my Listbox there are more than 10000 items and now it takes too much time when I load or refresh the page. Is it possible to trigger the sql query only by user input like the autocomplete widget do? My code is: <link href="test/styles/kendo.common.min.css" rel="stylesheet" /> <link href="test/styles/kendo.default.min.css" rel="stylesheet" /> <script src="test/js/jquery.min.js"></script> <script src="test/js/kendo.ui.core.min.js"></script> <script> $(document).ready(function() { var objekte = $("#objekte").kendoComboBox({ placeholder: "Objekt auswählen", dataTextField: "kurzname", dataValueField: "objekt_id", minLength: 2, delay: 0, dataSource: new kendo.data.DataSource({ transport: { read: "test/objects.php" }, schema: { data: "data" } }), }).data("kendoComboBox"); </script>

    Read the article

  • Error while closing SQL Connection

    - by Wickedman84
    I have a problem with closing the SQLconnection in my application. My application is in VB.net. I have a reference in my application to a class with code to open and close the database connection and to execute all sql scripts. The error occurs when i close my application. In the formClosing event of my main form I call a function that closes all the connections. But just before I close the connections I perform an SQLquery to delete a row from a table with the function below. Public Function DeleteFunction(ByVal mySQLQuery As String, ByVal cmd As SqlCommand) As Boolean Try cmd.Connection = myConnection cmd.CommandText = mySQLQuery cmd.ExecuteNonQuery() Return True Catch ex As Exception WriteErrorMessage("DeleteFunction", ex, Logpath, "SQL Error: " & mySQLQuery) Return False End Try End Function In my application I check the result of the boolean. If it returns True, then i call the function to close the database connection. The returned boolean is True and the requested row is deleted in my database. This means i can close my connection which I do with the function below. Public Sub DatabaseConnClose() myCommand.CommandText = "" myConnection.Close() myCommand = Nothing myConnection = Nothing End Sub After executing this code I receive an error in my logfile from the DeleteFunction. It says: "Connection property has not been initialized." It seems very strange to receive an error from a function that was completely executed, or am i wrong to think that? Can anyone tell me why I receive this error and how I can solve the problem?

    Read the article

  • Sharepoint 2010 - AAM - SPSite(SPContext.Current.Site.ID) RootWeb.Url is from wrong zone

    - by user2026343
    I have a sharepoint 2010 web application with 2 different zones, default zone with windows login (for search crawl), internet with Claims (FBA) for users to login. I have custom webparts that uses using (SPSite mySite = new SPSite(SPContext.Current.Site.ID)) using (SPWeb web = mySite.RootWeb) { string url = web.Url I use this url to include to emails etc... Problem is: when user connects to FBA (extended zone), and goes to the webpart,string url in my code returns the url of the default zone(windows auth) where user should not be touching. I have different host headers for these zones, any help would be very appreciated. Update: fixed it with using (SPSite newsite =new SPSite(SPContext.Current.Site.ID,SPContext.Current.Site.Zone)) using (SPWeb web = newsite.RootWeb) { //do your implementation here }

    Read the article

  • Need simple Twitter API v1.1 example to show timeline using jQuery or C# ASP.NET

    - by Ken Palmer
    With Twitter turning off the API 1.0 faucet on 6/11/2013, we have several sites that now fail to display timelines. I've been looking for an "If you did that, now do this" example. Here was Twitter's announcement. https://dev.twitter.com/blog/api-v1-is-retired Here is what we were originally doing to show the Twitter timeline via API 1.0. <div id="twitter"> <ul id="twitter_update_list"></ul> <script type="text/javascript" src="http://twitter.com/javascripts/blogger.js"></script> <script type="text/javascript" src="http://api.twitter.com/1/statuses/user_timeline/companytwitterhandle.json?callback=twitterCallback2&amp;count=1"></script> <div style="float:left;"><a href="https://twitter.com/companytwitterhandle" target="_blank">@companytwitterhandle</a> | </div> <div class="twitterimg">&nbsp;</div> </div> Initially I tried changing the version in the JavaScript reference URL like so, which did not work. <script type="text/javascript" src="http://api.twitter.com/1.1/statuses/user_timeline/companytwitterhandle.json?callback=twitterCallback2&amp;count=1"></script> Then I looked at the Twitter API documentation (https://dev.twitter.com/docs/api/1.1/overview) which lacks a clear transition example. I don't have 4 or 5 hours to delve into that, or into this disheveled FAQ (https://dev.twitter.com/docs/faq#17750). Then I found this API documentation regarding the user timeline. So I changed the URL again as shown below. https://dev.twitter.com/docs/api/1.1/get/statuses/user_timeline <script type="text/javascript" src="https://api.twitter.com/1.1/statuses/user_timeline.json?screen_name=companytwitterhandle&amp;count=1"></script> That did not work. Using jQuery or C# ASP.NET MVC, how can I transition that interface from Twitter API 1.0 to Twitter API 1.1? My first preference would be for a browser client side implementation if that is possible. Please include a code example. Thanks.

    Read the article

  • BUILD ERROR The plugin 'org.apache.maven.plugins:maven-eclipse-plugin' does not exist or no valid version could be found

    - by Surendra
    Searching repository for plugin with prefix: 'eclipse'. org.apache.maven.plugins: checking for updates from central NG] repository metadata for: 'org.apache.maven.plugins' could not be retrieved from repository: central due to an error: Error transferring file: Connection timed out: connect Repository 'central' will be blacklisted ] BUILD ERROR The plugin 'org.apache.maven.plugins:maven-eclipse-plugin' does not exist or no valid version could be found For more information, run Maven with the -e switch Total time: 22 seconds Finished at: Fri Aug 26 17:42:01 IST 2011 Final Memory: 3M/15M

    Read the article

  • InputDispatcher Error

    - by StarDust
    INFO/ActivityManager(68): Process com.example (pid 390) has died. ERROR/InputDispatcher(68): channel '406ed580 com.example/com.example.afeTest (server)' ~ Consumer closed input channel or an error occurred. events=0x8 ERROR/InputDispatcher(68): channel '406ed580 com.example/com.example.afeTest (server)' ~ Channel is unrecoverably broken and will be disposed! ERROR/InputDispatcher(68): Received spurious receive callback for unknown input channel. fd=165, events=0x8 Can anyone tell what may be the reason behind this error? I've ported a native code on the Android-ndk. One thing I noticed regarding fd (that may be some reason :S) My code uses fd_sets which was defined in winsock2.h But I didn't find fd_sets defined in android-ndk. So I had included "select.h" where fd_set is a typedef in the android-ndk: typedef __kernel_fd_set fd_set; Here is the log cat: 04-06 11:15:32.405: INFO/DEBUG(31): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 04-06 11:15:32.405: INFO/DEBUG(31): Build fingerprint: 'generic/sdk/generic:2.3.3/GRI34/101070:eng/test-keys' 04-06 11:15:32.415: INFO/DEBUG(31): pid: 335, tid: 348 >>> com.example <<< 04-06 11:15:32.426: INFO/DEBUG(31): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr deadbaad 04-06 11:15:32.426: INFO/DEBUG(31): r0 deadbaad r1 0000000c r2 00000027 r3 00000000 04-06 11:15:32.445: INFO/DEBUG(31): r4 00000080 r5 afd46668 r6 0000a000 r7 00000078 04-06 11:15:32.445: INFO/DEBUG(31): r8 804ab00d r9 002a9778 10 00100000 fp 00000001 04-06 11:15:32.445: INFO/DEBUG(31): ip ffffffff sp 44295d10 lr afd19375 pc afd15ef0 cpsr 00000030 04-06 11:15:32.756: INFO/DEBUG(31): #00 pc 00015ef0 /system/lib/libc.so 04-06 11:15:32.756: INFO/DEBUG(31): #01 pc 00013852 /system/lib/libc.so 04-06 11:15:32.767: INFO/DEBUG(31): code around pc: 04-06 11:15:32.785: INFO/DEBUG(31): afd15ed0 68241c23 d1fb2c00 68dae027 d0042a00 04-06 11:15:32.785: INFO/DEBUG(31): afd15ee0 20014d18 6028447d 48174790 24802227 04-06 11:15:32.785: INFO/DEBUG(31): afd15ef0 f7f57002 2106eb56 ec92f7f6 0563aa01 04-06 11:15:32.796: INFO/DEBUG(31): afd15f00 60932100 91016051 1c112006 e818f7f6 04-06 11:15:32.807: INFO/DEBUG(31): afd15f10 2200a905 f7f62002 f7f5e824 2106eb42 04-06 11:15:32.815: INFO/DEBUG(31): code around lr: 04-06 11:15:32.815: INFO/DEBUG(31): afd19354 b0834a0d 589c447b 26009001 686768a5 04-06 11:15:32.825: INFO/DEBUG(31): afd19364 220ce008 2b005eab 1c28d003 47889901 04-06 11:15:32.836: INFO/DEBUG(31): afd19374 35544306 d5f43f01 2c006824 b003d1ee 04-06 11:15:32.836: INFO/DEBUG(31): afd19384 bdf01c30 000281a8 ffffff88 1c0fb5f0 04-06 11:15:32.846: INFO/DEBUG(31): afd19394 43551c3d a904b087 1c16ac01 604d9004 04-06 11:15:32.856: INFO/DEBUG(31): stack: 04-06 11:15:32.856: INFO/DEBUG(31): 44295cd0 00000408 04-06 11:15:32.867: INFO/DEBUG(31): 44295cd4 afd18407 /system/lib/libc.so 04-06 11:15:32.875: INFO/DEBUG(31): 44295cd8 afd4270c /system/lib/libc.so 04-06 11:15:32.875: INFO/DEBUG(31): 44295cdc afd426b8 /system/lib/libc.so 04-06 11:15:32.885: INFO/DEBUG(31): 44295ce0 00000000 04-06 11:15:32.896: INFO/DEBUG(31): 44295ce4 afd19375 /system/lib/libc.so 04-06 11:15:32.896: INFO/DEBUG(31): 44295ce8 804ab00d /data/data/com.example/lib/libAFE.so 04-06 11:15:32.896: INFO/DEBUG(31): 44295cec afd183d9 /system/lib/libc.so 04-06 11:15:32.906: INFO/DEBUG(31): 44295cf0 00000078 04-06 11:15:32.906: INFO/DEBUG(31): 44295cf4 00000000 04-06 11:15:32.906: INFO/DEBUG(31): 44295cf8 afd46668 04-06 11:15:32.906: INFO/DEBUG(31): 44295cfc 0000a000 [heap] 04-06 11:15:32.916: INFO/DEBUG(31): 44295d00 00000078 04-06 11:15:32.927: INFO/DEBUG(31): 44295d04 afd18677 /system/lib/libc.so 04-06 11:15:32.927: INFO/DEBUG(31): 44295d08 df002777 04-06 11:15:32.945: INFO/DEBUG(31): 44295d0c e3a070ad 04-06 11:15:32.945: INFO/DEBUG(31): #00 44295d10 002c43a0 [heap] 04-06 11:15:32.945: INFO/DEBUG(31): 44295d14 002a9900 [heap] 04-06 11:15:32.956: INFO/DEBUG(31): 44295d18 afd46608 04-06 11:15:32.966: INFO/DEBUG(31): 44295d1c afd11010 /system/lib/libc.so 04-06 11:15:32.976: INFO/DEBUG(31): 44295d20 002c4298 [heap] 04-06 11:15:32.976: INFO/DEBUG(31): 44295d24 fffffbdf 04-06 11:15:33.006: INFO/DEBUG(31): 44295d28 000000da 04-06 11:15:33.006: INFO/DEBUG(31): 44295d2c afd46450 04-06 11:15:33.006: INFO/DEBUG(31): 44295d30 000001b4 04-06 11:15:33.026: INFO/DEBUG(31): 44295d34 afd13857 /system/lib/libc.so 04-06 11:15:33.026: INFO/DEBUG(31): #01 44295d38 afd46450 04-06 11:15:33.035: INFO/DEBUG(31): 44295d3c afd13857 /system/lib/libc.so 04-06 11:15:33.056: INFO/DEBUG(31): 44295d40 804ab00d /data/data/com.example/lib/libAFE.so 04-06 11:15:33.056: INFO/DEBUG(31): 44295d44 44295e8c 04-06 11:15:33.056: INFO/DEBUG(31): 44295d48 804ab00d /data/data/com.example/lib/libAFE.so 04-06 11:15:33.056: INFO/DEBUG(31): 44295d4c 804bfec3 /data/data/com.example/lib/libAFE.so 04-06 11:15:33.056: INFO/DEBUG(31): 44295d50 002c43a0 [heap] 04-06 11:15:33.066: INFO/DEBUG(31): 44295d54 44295e8c 04-06 11:15:33.066: INFO/DEBUG(31): 44295d58 804ab00d /data/data/com.example/lib/libAFE.so 04-06 11:15:33.076: INFO/DEBUG(31): 44295d5c 002a9778 [heap] 04-06 11:15:33.085: INFO/DEBUG(31): 44295d60 00000078 04-06 11:15:33.085: INFO/DEBUG(31): 44295d64 afd14769 /system/lib/libc.so 04-06 11:15:33.085: INFO/DEBUG(31): 44295d68 44295e8c 04-06 11:15:33.085: INFO/DEBUG(31): 44295d6c 805d9763 /data/data/com.example/lib/libAFE.so 04-06 11:15:33.085: INFO/DEBUG(31): 44295d70 44295e8c 04-06 11:15:33.085: INFO/DEBUG(31): 44295d74 8051dc35 /data/data/com.example/lib/libAFE.so 04-06 11:15:33.085: INFO/DEBUG(31): 44295d78 0000003a 04-06 11:15:33.085: INFO/DEBUG(31): 44295d7c 002a9900 [heap] 04-06 11:15:37.126: DEBUG/Zygote(33): Process 335 terminated by signal (11) 04-06 11:15:37.146: INFO/ActivityManager(68): Process com.example (pid 335) has died. 04-06 11:15:37.178: ERROR/InputDispatcher(68): channel '406f03a0 com.example/com.example.afeTest (server)' ~ Consumer closed input channel or an error occurred. events=0x8 04-06 11:15:37.178: ERROR/InputDispatcher(68): channel '406f03a0 com.example/com.example.afeTest (server)' ~ Channel is unrecoverably broken and will be disposed! 04-06 11:15:37.185: INFO/BootReceiver(68): Copying /data/tombstones/tombstone_09 to DropBox (SYSTEM_TOMBSTONE) 04-06 11:15:37.576: DEBUG/dalvikvm(68): GC_FOR_MALLOC freed 266K, 47% free 4404K/8199K, external 3520K/3903K, paused 306ms 04-06 11:15:37.835: DEBUG/dalvikvm(68): GC_FOR_MALLOC freed 203K, 47% free 4457K/8391K, external 3520K/3903K, paused 120ms 04-06 11:15:37.886: INFO/WindowManager(68): WIN DEATH: Window{406f03a0 com.example/com.example.afeTest paused=false} 04-06 11:15:38.095: DEBUG/dalvikvm(68): GC_FOR_MALLOC freed 67K, 47% free 4518K/8391K, external 3511K/3903K, paused 94ms 04-06 11:15:38.095: INFO/dalvikvm-heap(68): Grow heap (frag case) to 10.575MB for 196628-byte allocation 04-06 11:15:38.126: DEBUG/dalvikvm(126): GC_EXPLICIT freed 110K, 51% free 2903K/5895K, external 4701K/5293K, paused 2443ms 04-06 11:15:38.217: DEBUG/dalvikvm(68): GC_FOR_MALLOC freed 1K, 46% free 4708K/8647K, external 3511K/3903K, paused 96ms 04-06 11:15:38.225: INFO/WindowManager(68): WIN DEATH: Window{406f72f8 com.example/com.example.afeTest paused=false} 04-06 11:15:38.405: DEBUG/dalvikvm(68): GC_FOR_MALLOC freed 492K, 50% free 4345K/8647K, external 3511K/3903K, paused 96ms 04-06 11:15:38.485: ERROR/InputDispatcher(68): Received spurious receive callback for unknown input channel. fd=164, events=0x8

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >