Daily Archives

Articles indexed Monday March 7 2011

Page 7/11 | < Previous Page | 3 4 5 6 7 8 9 10 11  | Next Page >

  • I don't have AirPlayFeature

    - by 1110
    Hi, I have just installed new xcode with sdk 4.3b because I need 'airPlay' feature in my current project which is based on sdk 4.2. But I open my project and type my MPMoviePlayerController object.... mpObject.??? ... but here I don't have allowAirPlay property. But when I start new project and create movie player I have that property, but don't have in my old project, what should I setup to have this?

    Read the article

  • PHP Variable from extended class

    - by Ste
    I cant retrieve var from parent class: class core { var $variable; var $test; function __construct() {} public function setVar($var) $this->variable = $var; } } class test extends core { public function getVar() { return $this->variable; //also if i echo here i can't see !!!! } } $core = new core(); $core->test = new test(); print $core->test->getVar(); Any help??

    Read the article

  • No pre-built ActionBar for Android pre-3.0?

    - by Ollie C
    I note the release a few days ago of the static library bringing fragments to Android versions prior to 3.0, but does this library include the ActionBar? I suspect not. I assume that for an app that will work on pre-3.0 versions, that it needs a hand-built ActionBar implementation for versions up to 2.3 and then to use the OS default ActionBar in v3.0? for some reason I assumed the library had ActionBar in it, but as I dig further I'm not finding any evidence of its presence.

    Read the article

  • Workflow workarounds: tracking individual column changes

    - by PeterBrunone
    This post is long overdue, but since the question keeps popping up on various SharePoint discussion lists, I figured I'd document the answer here (next time I can just post a link instead of typing the whole thing out again).In short, you cannot trigger a SharePoint workflow when a column changes; you can only use the ItemChanged event.  To get more granular, then, you need to add some extra bits.Let's say you have a list called "5K Races" with a column called StartTime, and you want to execute some actions when the StartTime value changes.  Simply perform the following steps:1)  Create an additional column (same datatype) called OldStartTime.2)  When the workflow starts, compare StartTime to OldStartTime.    a) If they are equal, then do nothing (end).    b) If they are NOT equal, proceed with your workflow.3)  If 2b, then set OldStartTime to the value of StartTime.By performing step 3, you ensure that by the end of the workflow, OldStartTime will be equal to StartTime -- this is important because the workflow will continue to run every time a particular item is changed, but by taking away the criterion that would cause the workflow to run the second time, you have avoided an endless loop situation. 

    Read the article

  • Thoughts (on Windows Phone 7) from the MVP Summit

    - by Chris Williams
    Last week I packed off to Redmond, WA for my annual pilgrimage to Microsoft's MVP Summit. I'll spare you all the silly taunting about knowing stuff I can't talk about, etc... and just get to the point. I'm a XNA/DirectX MVP, an ASP Insider and a Languages (VB) Insider... so I actually had access to a pretty broad spectrum of information over the last week. Most of my time was focused on Windows Phone 7 related sessions, and while I can't dig deep into specifics, I can say that Microsoft is definitely not out of the fight for Mobile. The things I saw tell me that Microsoft is listening and paying attention to feedback, looking at what works & what doesn't and they are working their collective asses off to close the gap between Google and Apple. Anyone who has been in this industry for a while can tell you Microsoft does their best work when they are the underdog. They are currently behind, and have a lot of work ahead of them, but this is when they bring all their resources together to solve a problem. After the week I spent in Redmond, and the feedback I heard from other MVPs, and the technological previews I saw... I feel confident in betting heavily on Microsoft to pull this off.

    Read the article

  • SAB BizTalk Archiving Pipeline Component v0.2

    - by Stuart Brierley
    Just released to Codeplex is an updated version of my archiving pipeline component for BizTalk. The changes in this release are: Addition of FTP adapter macros to the base macros and File adapter macros. Fix for the issue of garbage collection of data streams within pipelines as discussed in this previous blog entry. Now looks for OutboundTransportType in addition to InboundTransportType to pick up send port transport type; Therefore changed %InboundTransportType% macro to %TransportType%. An initial outline of the project can be read here.

    Read the article

  • jQuery .Flv Player

    - by H(at)Ni
    I've recently used a cool .Flv player to play video files that are uploaded by site admin and thought it's good to share. Download from: http://flowplayer.org/ Using this control is very simple, just follow those steps : 1. Create an anchor with href equals to the video url  <a href="Video.flv" id="MyPlayer" ></a>   2. Add path to the player's javascript file <script type="text/javascript" src="flowplayer-3.2.4.min.js"></script> 3. Simple call to a function named flowplayer with the anchor id, and path of the player's swf file     <script type="text/javascript">       $(document).ready(function () {       flowplayer("MyPlayer", "flowplayer-3.2.5.swf");       });     </script>

    Read the article

  • FormatDate in Display Item Form Webpart

    - by H(at)Ni
    I've faced an issue that I wanted to display the date in the format of ('MMMM dd') that is retrieved from a sharepoint list in an arabic site collection. So, after googling this issue, I've found out that a possible solution to my poblem is using the function ddwrt:FormatDateTime that can be used as long as you'll include the following namespace xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" My purpose was solved by writing this line of code in my xsl code behind for the webpart : ddwrt:FormatDateTime(string(@StartDate),3073,'MMMM dd') but that worked only if the webpart is inserted into an English site . After trying to search but in vain, I started to use my guesses that ended up doing something like that: ddwrt:FormatDateTime(ddwrt:FormatDateTime(string(@StartDate),3073,'dd/MM/yyyy'), 3073, 'MMMM dd') And the cause of the problem was that sharepoint parses the date as 'MM/dd/yyyy' which I think could be related to server regional settings, so I had to force it to parse the date in arabic-Egypt format as 'dd/MM/yyyy' in order to get the correct 'Month Day' format as expected.

    Read the article

  • Q&amp;A: Where does high performance computing fit with Windows Azure?

    - by Eric Nelson
    Answer I have been asked a couple of times this year about taking compute intensive operations to Windows Azure and/or High Performance Computing on Windows Azure. It is an interesting (if slightly niche) area. The good news is we have a great paper from David Chappell on HPC Server and Windows Azure integration. As a taster: A SOA application running entirely on Windows Azure runs its WCF services in Azure Worker nodes. Download now Related Links: Other Q&A posts on my team blog Don’t forget to connect with the UK team if you stumbled across this post by accident/bing/google

    Read the article

  • iOS UITab Bar Icons

    - by Richard Jones
    I’ve been struggling trying to create the icons that are used for different tabs on an iPhone app. The difficulty is, is that each image is a PNG,  but alpha channels are used to represent their selected state. I’ve just come across this fab tool, that takes all the pain away,  using 30x30 png images,  I was able to create a really nice set of icons. http://scottpenberthy.com/tab/   (Respect)

    Read the article

  • Tomcat: how to change location of manager and host-manager to a subdirectory

    - by rolandpish
    Hi there. I'm running a Tomcat 6.0.28 at port 8080 in a Debian Squeeze box. I'm a newbie in tomcat. I would like to change the location of manager and host-manager applications. That is, instead of going to: http://myserver:8080/manager/html I would like that to be: http://myserver:8080/somesubdirectory/manager/html Is this possible? If yes, how can I achieve this? I would really appreciate any help in this. I've been trying to change the context of /etc/tomcat6/Catalina/localhost/manager.xml from /manager to /somesubdirectory/manager with no success. Also I tried to create a symlink under /var/lib/tomcat6/webapps/ROOT/somesubdirectory/manager with no success. Thanks in advance. Cheers.

    Read the article

  • Providing internet access to users in an Enterprise (MPLS ) Network

    - by Vivek Bernard
    Scenario I'm planning to setup a typical Head Office - Branch Office(s) Network Setup. there will be 25 branch offices in India of two will be overseas (one in US and the other in UK). All these will be connected via MPLS. Additional details: No of Concurrent users in each office is going to be 25 tranlating to 650 users The requirement is to provide "proxied" internet connectivity to the branch offices. How should I go about doing it? Plan A: Buying an internet leased line in the Head Office and distribute it through an internal proxy server to all the branches Plan B Buying separate internet lines for all the branches and setup individual proxies to all the branch offices.

    Read the article

  • Linux freezes every few seconds

    - by Zeppomedio
    We're having an issue where one our Linux boxes (Ubuntu 10.04 LTS, running on EC2 with a quadruple-large size, 68GB of RAM and 8 virtual cores with 3.25GHz each) freezes up every few seconds. Typing in an ssh session will freeze, and running strace on one of the Postgresql processes that's running usually shows: 02:37:41.567990 semop(7831581, {{3, -1, 0}}, 1 for a few seconds before it proceeds (it always gets stuck at that semop). OProfile shows that most of the time is spent in the kernel (60%) versus 37% in Postgresql. The result of these halts (which began suddenly a day ago) is that load on the box has gone from 0.7 to 10+, and causes our entire stack to slow done. Any ideas on how to track down what's going on? iostat doesn't show the disks being particularly slow or overloaded, and top shows user cpu % spike from 8% to about 40% whenever these back-ups happen.

    Read the article

  • a brand new FS based on a database without using fuse

    - by Devrim
    hi all, To serve millions of files out of a single directory, being able to connect to a drive from hundreds of endpoints, and for some other reasons (to avoid gluster/nfs/all fs based networking solutions), I want to evaluate the possibility of making a filesystem that's based on a mongodb (or any other). Basically, it works like fusefs, every single file is kept in mongo gridfs. In theory, I do, mount mongodbfs /mountPoint mongodb://localhost then when i say touch /mountPoint/test.txt this file is inserted into mongodb. This FS will also store uid/gid and perms with the file, we can throw hundreds of servers to it, and no useradd will be necessary. I'm not thinking to include all the features of FS, just the ones we need. My question is, how do I start my quest in finding resources, books, links, people, developers who'd help me implement this? at least a proof of concept. Is it feasible? What should I expect as a timeline for such undertaking? Please only think about gazillion small files and folders.

    Read the article

  • Login sometimes failing immediately after restoring a database

    - by Ian Ringrose
    We have a set of automated tests that restore a database then run some .net code against the database. Sometimes after the database is restored the login from Ado.net fails. If I re-run the test, then the restore and login works OK. The restored database looks OK when viewed with Management Studio. This is only an problem on some machines. We are using SQL server 2008. Is there a known issue with a database restore “returning “ a very short time before the restored database is up and running.

    Read the article

  • How do I enable SELinux when booting a ramdisk from a CD/DVD?

    - by JeffG
    I have a bootable DVD which boots the same Kernel as the Hard Drive (which uses SELinux). I have copied /etc/selinux and all kernel modules to my ramdisk, and have tried various combinations of selinux=1 and selinux 1 with enforcing 1 and enforcing 0. as Kernel boot parameters. All files contained in the checkpolicy, libselinux, policycoreutils, selinux-policy and selinux-policy-targeted rpms have also been copied into the ramdisk tree. After the system boots from the ramdisk, I check dmesg: % dmesg | grep -i selinux Kernel command line: initrd=idrd.img ramdisk_size=110476 selinux=1 SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability SElinux: Registering netfilter hooks But SELinux isn't running: % /usr/sbin/getenforce Disabled % /usr/sbin/setenforce 1 /usr/sbin/setenforce: SELinux is disabled Neither /var/log/messages nor /proc/kmsg hold clues.

    Read the article

  • Reducing the size of the EDB file.

    - by Toby
    I have hit an issue on a MS SBS machine where every morning the datastore for the exchange mailboxes dismounts itself. We believe the issue is that it has grown too large over time and needs cut down a bit. As part of this we have removed (purged) some mail files that were no longer needed, which should have given us a saving of roughly 3GB (more than enough saving for what we need). So I deleted the mailboxes, then purged them and noticed that the .edb file was still reporting the same size, I dismounted and remounted it to see if that would have any effect but it did not. Am I missing a step? I have read online that you can run offline defrag on the file but that seems to only save you a small amount of whitespace. Any help would be greatly appreciated.

    Read the article

  • Mac OS X Server 10.6 - Apple's software mirrored RAID worth it?

    - by Arko
    Hi, I am installing an Intel Xserve (Quad core Xeon) with Snow Leopard Server (10.6) on two 80Gb 7200rpm SATA HDs. I created a mirrored RAID set using Disk Utility with those two drives, all went fine. I was then asking myself if this is really a good idea. I know that an hardware RAID system would be better, but what about this software RAID? Have you any feedback on this? Will it work fine if one HD breaks down? Does this affect performance? [UPDATE] In short: Hardware RAID is better than software RAID which is better than none. Thank you all for the answers, they were very helpful. Especially Gordon's script to monitor failures. As Apple's software RAID is pretty silent about a drive failure.

    Read the article

  • ASA access lists and Egress Filtering

    - by Nate
    Hello. I'm trying to learn how to use a cisco ASA firewall, and I don't really know what I'm doing. I'm trying to set up some egress filtering, with the goal of allowing only the minimal amount of traffic out of the network, even if it originated from within the inside interface. In other words, I'm trying to set up dmz_in and inside_in ACLs as if the inside interface is not too trustworthy. I haven't fully grasped all the concepts yet, so I have a few issues. Assume that we're working with three interfaces: inside, outside, and DMZ. Let's say I have a server (X.Y.Z.1) that has to respond to PING, HTTP, SSH, FTP, MySQL, and SMTP. My ACL looks something like this: access-list outside_in extended permit icmp any host X.Y.Z.1 echo-reply access-list outside_in extended permit tcp any host X.Y.Z.1 eq www access-list outside_in extended permit tcp any host X.Y.Z.1 eq ssh access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp-data established access-list outside_in extended permit tcp any host X.Y.Z.1 eq 3306 access-list outside_in extended permit tcp any host X.Y.Z.1 eq smtp and I apply it like this: access-group outside_in in interface outside My question is, what can I do for egress filtering? I want to only allow the minimal amount of traffic out. Do I just "reverse" the rules (i.e. the smtp rule becomes access-list inside_out extended permit tcp host X.Y.Z.1 any eq smtp ) and call it a day, or can I further cull my options? What can I safely block? Furthermore, when doing egress filtering, is it enough to apply "inverted" rules to the outside interface, or should I also look into making dmz_in and inside_in acls? I've heard the term "egress filtering" thrown around a lot, but I don't really know what I'm doing. Any pointers towards good resources and reading would also be helpful, most of the ones I've found presume that I know a lot more than I do.

    Read the article

  • KVM and libvirt: How to configure a new disc device to an existing VM?

    - by initall
    I've got an Ubuntu 9.04 server running two VM's. In /etc/libvirt/qemu/machine1.xml two disk devices are defined like this: <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/vserver/machine1/disk0.qcow2'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='disk'> <source file='/vserver/machine1/disk1.qcow2'/> <target dev='hdb' bus='ide'/> </disk> I need more storage space in at least one of the devices and thought about adding a third hdc device by simply adding one with same style as above and re-organising my mount structure (The virtual sizes of the current qcow2 files are unfortunately limited.) My problem is that reloading libvirtd and restarting the VM do not result in a new visible device (checked with fdisk). I'm aware of extending an existing qcow2 file (converting to raw format, cat-ing/adding the new one, using smth. like gparted) - but only as a last resort. Hopefully it's something very simple I'm missing?

    Read the article

  • Elevating UAC via .bat file?

    - by jslaker
    Pretty straightforward one that I'm having trouble finding an answer to. serverfault previously helped me with finding a way to automate Windows updates without using WSUS. It's working fantastically, but to run it over the network, you have to first mount a shared drive. That's pretty simple XP since you just mount the drive and run the updater. On Vista and W7, though, this all has to be done with elevated privileges to work correctly. The UAC account can't see network drives mounted by the regular user, so in order to get everything working, I have to mount the share via net use from an escalated shell. I'd like to automate mounting this share and launching the updater via a simple .bat file. I could probably just instruct everybody to right click "Run as Administrator" on the .bat file, but I'd like to keep things as simple as possible and have the .bat automatically prompt the user to escalate their privileges. Since these computers don't belong to us, I can't count on anything like Powershell being installed, so that rules any solution along those lines out and pretty much have to rely on things that would be included in an RTM Vista install. I'm hoping I'm mostly missing something obvious here. :)

    Read the article

  • Can I install SQL Server 2008 R2 on a Windows Server 2008 R2 Standard machine in a workgroup then join the server to a domain?

    - by Zero Subnet
    I have a Windows 2008 Server Standard x64 machine that I need to install SQL Server 2008 R2 Standard on then ship it to a different site where it will be joined to a Active Directory domain. The server is now using the default "WORKGROUP" workgroup and i need to know if i can install SQL Server on it then ship it to the other site where it will be joined to the domain without issues. What are the possible problems that could happen? are there any workarounds?

    Read the article

  • Lingering database-connections from Feng Office

    - by Bobby
    I've installed Feng Office on our main server which is working perfectly so far. Unfortunately it seems like there's a problem with the connection to the MySQL-Database. While the connection itself works fine, it's the reuse/pooling of connections which seems to be bugged. There are lingering/sleeping connections to the server from Feng Office which won't close and don't get reused after some time (120 seconds). Of course those lingering processes/connections are piling up pretty fast. I've found a thread at the forums about this behavior, but the suggested fix is already applied (by default). I'm sure this is just a configuration issue, but I'm a little clue less because Feng is besides a MediaWiki, a DokuWiki and homebrewed PHP applications the only one with this issue. The setup is a Microsoft Windows 2003 Server with MySQL 5.0.26 and Apache 2.2. Where can I start looking for clues why this is happening and how do I get rid of lingering MySQL-Connections?

    Read the article

  • calling a different python interpreter from bash command line

    - by Dennis Daniels
    I have python 2.7 installed [user@localhost google_appengine]$ python Python 2.7 (r27:82500, Sep 16 2010, 18:03:06) [GCC 4.5.1 20100907 (Red Hat 4.5.1-3)] on linux2 Type "help", "copyright", "credits" or "license" for more information. I want to use the python 2.5.2 that is in this directory [user@localhost Downloads]$ ls |grep "Python-2*" Python-2.5.2 Python-2.5.2.tgz to run a python script in Khan Academy platform against a google app engine application sudo python sample_data.py -a ~/workspace/GAE/google_appengine/appcfg.py upload Currently, when running the last script 2.7 python complains a lot (Google App Engine runs on 2.5.2 mostly and 2.6 almost) I would like to do something like sudo python env set ~/Downloads/Python-2.5.2 sample_data.py -a ~/workspace/GAE/google_appengine/appcfg.py upload Is this possible? If yes, please point the way. If not, please suggest a way to call python2.5.2 WITHOUT having to uninstall python 2.7 many many thanks Dennis

    Read the article

  • Secret, unlogged, transparent, case-sensitive proxy in IIS6?

    - by Ian Boyd
    Does IIS have a secret, unlogged, transparent, case-sensitive proxy built into it? A file exists on the web-server: GET http://www.stackoverflow.com/javascript/ModifyQuoteArea.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:20:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... Problem is that a changes made to the file will not get served, the old (i.e. February of last year) version keeps getting served: HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:23:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... The same old file gets served, even though we've: renamed the file deleted the file restarted IIS The request for this file does not appear in the IIS logs (e.g. C:\WINNT\System32\LogFiles\W3SVC7\) And this only happens from the outside (i.e. the internet). If you issue the request locally on the server, then you will: - get the current file (file there) - 404 (file renamed) - 404 (file deleted) But if i change the case of the requested resource, i.e.: GET http://www.stackoverflow.com/javascript/MoDiFyQuOtEArEa.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com Note: MoDiFyQuOtEArEa.js verses ModifyQuoteArea.js Then i do get the proper file (or get the 404 as i expect if the file is renamed or deleted). But any subsequent changes to the file will not show up until i change the case of the file i'm asking for. Checking the IIS logs all indicate that the (internet) requests are all coming the correct client on the internet (i.e. not from some intermediate proxy). Since the file doesn't exist on the hard drive anymore, i conclude that there is a proxy. The requests serviced from this proxy are not logged in the IIS logs. The requests for new files are logged, and from the client IP, not a proxy IP. The proxy is case sensitivie. This does not sound like something Microsoft, or IIS, would do: - a transparent proxy - case-sensitivie - unlogged - surviving restarts of IIS - surviving in a cache for hours i can't believe that our customer's IIS is doing these things. i'm assuming there is some other transparent proxy in front of IIS. Or, does IIS have a transparent, unlogged, case-sensitive, memory based, proxy, that caches content for at least 7 hours? (Come Monday morning, IIS is serving the correct file, unlogged).

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11  | Next Page >