Search Results

Search found 26555 results on 1063 pages for 'active directory explorer'.

Page 100/1063 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• AD-Integrated DNS failure: "Access was Denied"

  - by goldPseudo

  I have a single Windows 2008 R2 server configured as a domain controller with Active Directory Domain Services and DNS Server. The DNS Server was recently uninstalled and reinstalled in an attempt to fix a (possibly unrelated) problem; the event log was previously flooded with errors (#4000, "The DNS Server was unable to open Active Directory...") which reinstalling did not fix. However, while before it was at least showing and resolving names from the local network (slowly), now it's showing nothing at all. (The original error started with a #4015 error "The DNS server has encountered a critical error from the Active Directory," followed by a long string of #4000 and a few #4004. This may have been caused when a new DNS name was recently added, but I can't be sure of the timing.) Attempting to manage the DNS through Administrative Tools > DNS brings up an error: The server SERVERNAME could not be contacted. The error was: Access was denied. Would you like to add it anyway? Selecting yes just puts a SERVERNAME item on the list, but with all the configuration options grayed out. I attempted editing my hosts file as per this post but to no avail. Running dcdiag, it does identify the home server properly, but fails right away testing connectivity with: Starting test: Connectivity The host blahblahblahyaddayaddayadda could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... SERVERNAME failed test Connectivity Adding the blahblahblahyaddayaddayadda address to hosts (pointing at 127.0.0.1), the connectivity test succeeded but it didn't seem to solve the fundamental problem (Access was denied) so I hashed it out again. Primary DNS server is properly pointing at 127.0.0.1 according to ipconfig /all. And the DNS server is forwarding requests to external addresses properly (if slowly), but the resolving of local network names is borked. The DNS database itself is small enough that I am (grudgingly) able to rebuild it if need be, but the DNS Server doesn't seem willing to let me work with (or around) it at all. (and yes before you ask there are no system backups available) Where do I go from here? As requested, my (slightly obfuscated) dcdiag output: Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = bulgogi * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Obfuscated\BULGOGI Starting test: Connectivity The host a-whole-lot-of-numbers._msdcs.obfuscated.address could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... BULGOGI failed test Connectivity Doing primary tests Testing server: Obfuscated\BULGOGI Skipping all tests, because server BULGOGI is not responding to directory service requests. Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : obfuscated Starting test: CheckSDRefDom ......................... obfuscated passed test CheckSDRefDom Starting test: CrossRefValidation ......................... obfuscated passed test CrossRefValidation Running enterprise tests on : obfuscated.address Starting test: LocatorCheck ......................... obfuscated.address passed test LocatorCheck Starting test: Intersite ......................... obfuscated.address passed test Intersite And my hosts file (minus the hashed lines for brevity): 127.0.0.1 localhost ::1 localhost And, for the sake of completion, here's selected chunks of my netstat -a -n output: TCP 0.0.0.0:88 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:389 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:464 0.0.0.0:0 LISTENING TCP 0.0.0.0:593 0.0.0.0:0 LISTENING TCP 0.0.0.0:636 0.0.0.0:0 LISTENING TCP 0.0.0.0:3268 0.0.0.0:0 LISTENING TCP 0.0.0.0:3269 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 0.0.0.0:9389 0.0.0.0:0 LISTENING TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING TCP 0.0.0.0:49158 0.0.0.0:0 LISTENING TCP 0.0.0.0:49164 0.0.0.0:0 LISTENING TCP 0.0.0.0:49178 0.0.0.0:0 LISTENING TCP 0.0.0.0:49179 0.0.0.0:0 LISTENING TCP 0.0.0.0:50480 0.0.0.0:0 LISTENING TCP 127.0.0.1:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:139 0.0.0.0:0 LISTENING TCP 192.168.12.127:445 192.168.12.50:51118 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.4:33579 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.100:1115 ESTABLISHED TCP 192.168.12.127:50784 192.168.12.50:49174 ESTABLISHED <snip ipv6> UDP 0.0.0.0:123 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:4500 *:* UDP 0.0.0.0:5355 *:* UDP 0.0.0.0:59638 *:* <snip a few thousand lines> UDP 0.0.0.0:62140 *:* UDP 127.0.0.1:53 *:* UDP 127.0.0.1:49540 *:* UDP 127.0.0.1:49541 *:* UDP 127.0.0.1:53655 *:* UDP 127.0.0.1:54946 *:* UDP 127.0.0.1:58345 *:* UDP 127.0.0.1:63352 *:* UDP 127.0.0.1:63728 *:* UDP 127.0.0.1:63729 *:* UDP 127.0.0.1:64215 *:* UDP 127.0.0.1:64646 *:* UDP 192.168.12.127:53 *:* UDP 192.168.12.127:67 *:* UDP 192.168.12.127:68 *:* UDP 192.168.12.127:88 *:* UDP 192.168.12.127:137 *:* UDP 192.168.12.127:138 *:* UDP 192.168.12.127:389 *:* UDP 192.168.12.127:464 *:* UDP 192.168.12.127:2535 *:* <snip ipv6 again>

  Read the article

• hg archive to Remote Directory

  - by Brett Daniel

  Is there any way to archive a Mercurial repository to a remote directory over SSH? For example, it would be nice if one could do the following: hg archive ssh://[email protected]/path/to/archive However, that does not appear to work. It instead creates a directory called ssh: in the current directory. I made the following quick-and-dirty script that emulates the desired behavior by creating a temporary ZIP archive, copying it over SSH, and unzipping the destination directory. However, I would like to know if there is a better way. if [[ $# != 1 ]]; then echo "Usage: $0 [user@]hostname:remote_dir" exit fi arg=$1 arg=${arg%/} # remove trailing slash host=${arg%%:*} remote_dir=${arg##*:} # zip named to match lowest directory in $remote_dir zip=${remote_dir##*/}.zip # root of archive will match zip name hg archive -t zip $zip # make $remote_dir if it doesn't exist ssh $host mkdir --parents $remote_dir # copy zip over ssh into destination scp $zip $host:$remote_dir # unzip into containing directory (will prompt for overwrite) ssh $host unzip $remote_dir/$zip -d $remote_dir/.. # clean up zips ssh $host rm $remote_dir/$zip rm $zip Edit: clone-and-push would be ideal, but unfortunately the remote server does not have Mercurial installed.

  Read the article

• How to set up multiple DNS servers on an intranet

  - by Brent

  We have an Active Directory network, with a mixture of Windows DNS, linux BIND servers, and want to use OpenDNS as our external DNS provider. I am wondering What is the best way to set up these servers (regarding forwarders, recursion, etc.)? Active Directory is our main internal DNS for our domain, and has 3 redundant servers. DHCP and all our servers use these as their DNS servers. Then we have a legacy AD server from an old network that is still authoritative for a bunch of domains. Finally, we have a couple of Linux Bind servers that are authoritative for a bunch of websites we host. Should our main AD servers point to our legacy AD server, which points to one of our BIND servers, which points to the other BIND server, which finally points out to openDNS? Or should our main AD servers point to all of these directly? - or is there a better option? What happens if a domain is listed in 2 places? Does DNS process the forwarders in order? What about root servers - if I want to use OpenDNS for "everything else", do I just list them as the last forwarders, and delete the root servers from all my DNS servers? How does recursion work - in this scenario, should I be using recursion or not?

  Read the article

• Installshield 2009 Premier Basic MSI: Not show a warning message window during uninstall

  - by Samir

  Installshield 2009 Premier Basic MSI: When I uninstall there is a Message Box saying that explorer has to be closed: [Title] My-Product-Name [List] Explorer [radio button 1, Selected by default] Automatically close applications and attempt to restart them after setup is complete [radio button 2] Do not close applications. (A Reboot will be required) [Ok Button] [Cancel Button] If I click OK [with radio button 1 selected] all opened folders are closed !!! How to get rid of this, I don't want any warning message box to show and not close explorer either? More info: I have a dll which is used to show explorer context menu with icons when we right click on any file/folder. This dll is registered during installation and unregistered during uninstall. When we uninstall WinRAR we don't see any such messages, do we?

  Read the article

• Adding new SPNs to existing service ids

  - by jmh

  We have a tomcat server using spring-security kerberos to authenticate users to the webpage against active directory. There are around 25 domain controllers. The site has two CNAME based DNS aliases. The site currently has one Service ID with SPNs registered for the DNS A record as well as each of the CNAMEs. While everything is working right now, I don't know how to reliably change this configuration without possible downtime. The reason is that clients cache kerberos tickets: http://www.juniper.net/techpubs/en_US/uac4.2/topics/concept/user-role-active-directory-about.html The 'kerbtray.exe' program is helpful for viewing and deleting Kerberos tickets on the endpoint. Old tickets must be purged from the endpoint if SPNs are updated or passwords are changed (assuming the endpoint still has a cached copy of the ticket from a prior SPNEGO request to the MAG Series device. During testing, you should purge tickets before each authentication request. Description of "klist" program used to inspect/delete cached tickets: http://technet.microsoft.com/en-us/library/hh134826.aspx So if each of the clients (users running windows) who connect to my web server have kerberos tickets that become invalid as soon as I update the SPNs or passwords, how do I ensure changes are seamless? Are there any operations that can be done safely? I can't just ask all of the users to install klist and delete their old tickets.

  Read the article

• Migrateing to Windows Server 2008 R2 Domain Controllers - a few Questions/Issues

  - by Chris

  Ok so here's our setup: We have 2 Windows2k3 Domain Controllers. I am trying to replace them with Windows 2008 R2. The Win2k3 servers are DC01 and DC02. The Windows2k8 servers are DC1 and DC2. I prepared the Windows Server 2003 Forest Schema for a Domain Controller That Runs Windows Server 2008 or Windows Server 2008 R2. Then with both of the new servers up as member servers I dcpromo'd DC1 using the advanced option and added it successfully to my exisiting domain. Roles are GC, DNS and Active Directory Domain Services.I transferred The PDC, RID pool manager and Infrastructure master FSMO to the new DC.(DC1) The Schema master and Domain naming master are still on the old DC (DC01). The first issue I'm encountering is when i dcpromo the second DC (DC2) and select "Replicate data over the network from and existing domain controller" I select the new DC to replicate from (DC1) I get the following error: "Failed to identify the requested replica partner (dc1.xxx.org) as a valid domain controller with a machine account for (DC2$). This is likely due to either the machine account not being replicated to this domain controller because of replication latency or the domain controller not advertising the Active Directory Domain Services. Please consider retrying the operation with \dc01.xxx.org as the replica partner. "The server is unwilling to process the request." Is this because the Schema master and Domain naming master roles are still on the old DC (DC01)? And if so, if I transfer Schema master and Domain naming master roles to DC1 what is the risk or breaking my AD? I'm a little paranoid because this process HAS to be transparent. ANY down time or interruption will result in me getting a verbal ass kicking from my I.T. Director. Both of the new servers DNS point the the old DNS servers (DC01 and DC02) not themselves by the way. Thanks in Advance -Chris

  Read the article

• Open Folder and Select multiple files

  - by Vytas999

  In C# I want to open explorer and in this explorer window must be selected some files. I do this like that: string fPath = newShabonFilePath; string arg = @"/select, "; int cnt = filePathes.Count; foreach (string s in filePathes) { if(cnt == 1) arg = arg + s; else { arg = arg + s + ","; } cnt--; } System.Diagnostics.Process.Start("explorer.exe", arg); But only the last file of "arg" is selected. How to make that all files of arg would be selected, when explorer window is opened..?

  Read the article

• Linux authentication via ADS -- allowing only specific groups in PAM

  - by Kenaniah

  I'm taking the samba / winbind / PAM route to authenticate users on our linux servers from our Active Directory domain. Everything works, but I want to limit what AD groups are allowed to authenticate. Winbind / PAM currently allows any enabled user account in the active directory, and pam_winbind.so doesn't seem to heed the require_membership_of=MYDOMAIN\\mygroup parameter. Doesn't matter if I set it in the /etc/pam.d/system-auth or /etc/security/pam_winbind.conf files. How can I force winbind to honor the require_membership_of setting? Using CentOS 5.5 with up-to-date packages. Update: turns out that PAM always allows root to pass through auth, by virtue of the fact that it's root. So as long as the account exists, root will pass auth. Any other account is subjected to the auth constraints. Update 2: require_membership_of seems to be working, except for when the requesting user has the root uid. In that case, the login succeeds regardless of the require_membership_of setting. This is not an issue for any other account. How can I configure PAM to force the require_membership_of check even when the current user is root? Current PAM config is below: auth sufficient pam_winbind.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account sufficient pam_winbind.so account sufficient pam_localuser.so account required pam_unix.so broken_shadow password ..... (excluded for brevity) session required pam_winbind.so session required pam_mkhomedir.so skel=/etc/skel umask=0077 session required pam_limits.so session required pam_unix.so require_memebership_of is currently set in the /etc/security/pam_winbind.conf file, and is working (except for the root case outlined above).

  Read the article

• Maven Mojo & SCM Plugin: Check for a valid working directory

  - by Patrick Bergner

  Hi there. I'm using maven-scm-plugin from within a Mojo and am trying to figure out how to determine if a directory D is a valid working directory of an SCM URL U (i.e. a checkout of U to D already happened). The context is that I want to do a checkout of U if D is a working set or do an update if it isn't. The plan is to check out U to D if D does not exist, update D if D is a valid working directory of U, display an error if D exists and is not a valid working directory of U. What I tried is to call ScmManager.status(), ScmManager.list() and ScmManager.changelog() and try to guess something from their results. But that didn't work. The results from status and changelog always return something positive (isSuccess() = true, getChangedFiles() = valid List, no exceptions to catch), whereas list throws an exception in any case. ScmRepository and ScmFileSet don't seem to provide suitable methods as well. An option would be to always do an update if D exists but then I cannot tell if it is a working directory of U or any SCM working directory at all. The ideal solution would be independent of the actual SCM system and a specific ScmVersion. Thanks for your help! Patrick

  Read the article

• Can I use IIS to do ActiveDirectory single-sign-on for another website?

  - by brofield

  I'm trying to add Active Directory single-sign-on support to an existing SOAP server. The server can be configured to accept a trusted reverse-proxy and use the X-Remote-User HTTP header for the authenticated user. I want to configure IIS to be the trusted proxy for this service, so that it handles all of the Active Directory authentication for the SOAP server. Basically IIS would have to accept HTTP connections on port X and URL Y, do all the authentication, and then proxy the connection to a different server (most likely the same X and Y). Unfortunately, I have no knowledge of IIS or AD (so I am trying my best to learn enough to build this solution) so please be gentle. I would assume that this is not an uncommon scenario, so is there some easy way to do this? Is this sort of functionality built into IIS or do I need to build some sort of IIS proxy program myself? Is there a better option for getting the authentication done and the X-Remote-User HTTP header set than requiring IIS? Update: For example, what I am trying to create is: [CLIENT] [IIS] [AD] [SOAP-SERVER] 1. |---------------->| 2. |<--------------->|<---------->| 3. |--------------------------->| 4. |<---------------------------| 5. |<----------------| 1. POST to http://example.com/foo/bar.cgi 2. Client is not authenticated, so do authentication 3. Once validated, send request to server (X-Remote-User: {userid}) 4. Process request, send response 5. Forward response to client I need to know how to configure IIS to do the automatic authentication of the user using AD, and then to proxy the request to the actual server, sending the userid in the X-Remote-User HTTP header.

  Read the article

• Windows Domain Chaos - Any Solving Approach

  - by Chake

  we are running an old Window 2003 Server as Domain Controller (DC2003). To safely migrate to Windows 2008 R2 we added a 2008 R2 (DC2008R2) to the domain as domain controller (adprep etc.). After dcpromo on DC2008R2 everything seemed to be ok. The new DC appeared under the "Domain Controlelrs" node. It wasn't checked at this time, if DC2008R2 can REALLY act as domain controller. Later we tried to shutdown DC2003 and ran into a total mess with non functional Exchange and Team Foundation Services. After that I got the job to fix... First i thought it could be an Problem with DC2008R2. So I removed it as Domain Controller and installed a new Windows 2008 R8 Server DC2008R2-2. I ran into similar Problems. I tried a bunch of stuff, but nothign helped. I won't list it, maybe I made an mistake, so I'm willing to redo it with your suggestions. To have a starting point I tried the best practise analyser whicht ended up with 24 "Compatible" and 26 "Not Compatible" tests. From these 26 tests 19 read the same. (I'm translating from german, so that may to be the exact wording) Problem: Using the Best Practise Analyser for Active Directory Domain Services (Active Directory Domain Services Best Practices Analyzer, AD DS BPA) no data can be be gathered using the name of the forest and the domain controller DC2008R2-2. I appreciate any suggestions, this really bothers me.

  Read the article

• I want to add a Quality Assurance domain. How do I handle DNS servers?

  - by Tim

  I'm advising a large client on how to isolate their dev and testing from their production. They already have one domain, lets say xyz.net with the active directory domain as "XYZ01". I want to add second domain say QAxyz.net and make its active directory domain "QA01" All development and QA servers would be moved to the QAxyz.net domain, the machines would be part of the QA01 domain. Note: Some of these servers will have the same name as the production servers for testing purposes. I believe we would have separate DNS servers for each domain. If I am logged into the QA01 domain, to access the production domain I would qualify my access like so: \PRODSERVER.xyz.net login: XYZ01\username Do I need to add a forwarder to my QAxyz.net DNS server so that it can see xyz.net? Would I need to do the same to the xyz.net DNS server to see QAxyz.net? I don't know how to advise them in this. Does anyone have any other recommendations to isolationg a QA domain? Many Thanks in advance! Tim

  Read the article

• jquery image slide procedure faulty in IE

  - by sahulik

  Where did I go wrong? IE reports a problem while everything else seems to be just fine. $(document).ready(function(){ menu = $('#menu > ul > li'); image = $('#image > ul > li > div'); menu.each(function(idx) { this.slide = image[idx]; }).hover( function() { menu.removeClass('active'); image.removeClass('active'); $(this).addClass('active'); $(this.slide).addClass('active'); }); });

  Read the article

• Migrating to Windows Server 2008 R2 Domain Controllers - a few Questions/Issues

  - by Chris

  Ok so here's our setup: We have 2 Windows 2003 Domain Controllers. I am trying to replace them with Windows 2008 R2. The 2003 servers are named DC01 and DC02. The 2008 R2 servers are DC1 and DC2. I prepared the Windows Server 2003 Forest Schema for a Domain Controller that runs Windows Server 2008 or Windows Server 2008 R2. Then with both of the new servers up as member servers I ran dcpromo on DC1 using the advanced option and added it successfully to my existing domain. It's roles are GC, DNS and Active Directory Domain Services. I transferred The PDC Emulator, RID Pool Manager, and Infrastructure Master roles to DC1. The Schema Master and Domain Naming master are still on DC01. The first issue that I'm encountering is when I dcpromo the DC2 and select "Replicate data over the network from and existing domain controller" I select that I want to replicate from DC1 and I get the following error: Failed to identify the requested replica partner (dc1.xxx.org) as a valid domain controller with a machine account for (DC2$). This is likely due to either the machine account not being replicated to this domain controller because of replication latency or the domain controller not advertising the Active Directory Domain Services. Please consider retrying the operation with \dc01.xxx.org as the replica partner. "The server is unwilling to process the request. Is this because the Schema Master and Domain Naming Master roles are still on the old DC01? And if so, if I transfer Schema Master and Domain Naming Master roles to DC1 what is the risk or breaking my AD? I'm a little paranoid because this process HAS to be transparent. ANY down time or interruption will result in me getting a verbal ass kicking from my I.T. Director. Both of the new servers DNS point the the old DNS servers (DC01 and DC02) not themselves by the way.

  Read the article

• w2k3 AD DC Demotion fails with "no other AD DC for that domain can be contacted"

  - by Kstro21

  i've a small office with a single w2k3 sp2 DC(bad idea, but it is real), now, i want to make a clean install of that pc, so, i got another one, install w2k3 sp2, add it to the domain, dcpromo and set it to be a GC, untill now everything is ok, then tried to dcpromo in the primary DC, but it fails with The box indicating that this domain controller is the last controller for the domain mydomain.com is unchecked. However, no other Active Directory domain controllers for that domain can be contacted. Do you wish to proceed anyway? If you click Yes, any Active Directory changes that have been made on this domain controller will be lost. So, i started to move all the roles to the new server as described here, when all was ok with the roles, i tried doing the same, but got the same result. Tried moving the DNS to the new server, but it doesn't make difference. Shutdown to the old server, then tried to log into a workstation, but it fails saying the domain is not available, also coudln't add new workstation to the domain, so i have to power on the old server again. So, if i successfully move all the roles and dns to the new server: why dcpromo give such message in the old server? why if i shutdown the old server the domain is not available?? if i successfully move all the roles and dns to the new server, and i click yes when dcpromo give warning in the old server, will i lose all users, computers, ou, etc.? am i missing some steps to make this work?? hope you can help me thanks

  Read the article

• AFP/SSH stopped working on OS X Server

  - by churnd

  I have 3 Mac OS X servers all bound to AD, all configured in the Golden Triangle setup. All 3 are completely separate from each other in terms of services, but all reside on the same internal network and are all bound to the same Active Directory domain. Two are 10.5.x (latest updates) and one is 10.6.3. Last weekend, all 3 simultaneously stopped allowing Active Directory users access to certain services, specifically AFP & SSH. SMB still works fine on all 3. I asked the AD admin if anything changed, and he said "Yes, we made a change to user accounts to toughen up security", and suggested I use [email protected] instead of just username. This still didn't work. I have completely removed one of my servers from AD, and re-joined, but this didn't work either. I can do kinit from command line and get a Kerberos ticket. sudo klist -ke shows all services are configured to use the correct Kerberos principles. I have been scavenging the logs for any useful info. The AFP log just shows that I'm connecting and disconnecting. The DirectoryService.log shows stuff about misconfigured Kerberos hashes, but my research is showing that's not uncommon. /var/log/system.log isn't showing anything useful that I can see. I'm not sure where to go from here. Any help/ideas appreciated.

  Read the article

• Problems installing Windows service via Group Policy in a domain

  - by CraneStyle

  I'm reasonably new to Group Policy administration and I'm trying to deploy an MSI installer via Active Directory to install a service. In reality, I'm a software developer trying to test how my service will be installed in a domain environment. My test environment: Server 2003 Domain Controller About 10 machines (between XP SP3, and server 2008) all joined to my domain. No real other setup, or active directory configuration has been done apart from things like getting DNS right. I suspect that I may be missing a step in Group Policy that says I need to grant an explicit permission somewhere, but I have no idea where that might be or what it will say. What I've done: I followed the documentation from Microsoft in How to Deploy Software via Group Policy, so I believe all those steps are correct (I used the UNC path, verified NTFS permissions, I have verified the computers and users are members of groups that are assigned to receive the policy etc). If I deploy the software via the Computer Configuration, when I reboot the target machine I get the following: When the computer starts up it logs Event ID 108, and says "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was: An operations error occurred." There are no previous log entries to check, which is weird because if it ever actually tried to invoke the windows installer it should log any sort of failure of my application's installer. If I open a command prompt and manually run: msiexec /qb /i \\[host]\[share]\installer.msi It installs the service just fine. If I deploy the software via the User Configuration, when I log that user in the Event Log says that software changes were applied successfully, but my service isn't installed. However, when deployed via the User configuration even though it's not installed when I go to Control Panel - Add/Remove Programs and click on Add New Programs my service installer is being advertised and I can install/remove it from there. (this does not happen when it's assigned to computers) Hopefully that wall of text was enough information to get me going, thanks all for the help.

  Read the article

• how can a Win32 App plugin load its DLL in its own directory

  - by Jean-Denis Muys

  My code is a plugin for a specific Application, written in C++ using Visual Studio 8. It uses two DLL from an external provider. Unfortunately, my plugin fails to start because the DLLs are not found (I put them in the same directory as the plugin itself). When I manually move or copy the DLLs to the host application directory, then the plugin loads fine. This moving was deemed unacceptably cumbersome for the end user, and I am looking for a way for my plugin to load its DLLs transparently. What can I do? Relevant details: the host Application plugins are located in a directory mandated by the host application. That directory is not in the DLL search path and I don't control it. The plugin is itself packaged as a subdirectory of the plugin directory, holding the plugin code itself, but also any resource associated with the plugin (eg images, configuration files…). I control what's inside that subdirectory, called a "bundle", but not where it's located. the common plugin installation idiom for that App is for the end user to copy the plugin bundle to the plugin directory. This plugin is a port from the Macintosh version of the plugin. On the Mac there is no issue because each binary contains its own dynamic library search path, which I set as I needed to for my plugin binary. To set that on the Mac simply involves a project setting in the Xcode IDE. This is why I would hope for something similar in Visual Studio, but I could not find anything relevant. Moreover, Visual Studio's help was anything but, and neither was Google. A possible workaround would be for my code to explicitly tell Windows where to find the DLL, but I don't know how, and in any case, since my code is not even started, it hasn't got the opportunity to do so. As a Mac developer, I realize that I may be asking for something very elementary. If such is the case, I apologize, but I have run out of hair to pull out.

  Read the article

• Sharepoint AD imported users are becomming sporadically corrupted, causing us to have to create a ne

  - by TrevJen

  Sharepoint 2007 MOSS with AD imported users. All servers are 2008. I have around 50 users, over the past 2 months, I have had a handful of the users suddenly unable to login to Sharepoint. When they login, they either get a blank screen or they are repropmted. These users are using accounts that have been used for many months, sometimes the problem originates with a password change. In all cases, the users account works on every other Active Directory authenticated resource (domain, exchange, LDAP). In the most recent case, last night I was forced deleted a user ("John smith") because of corruption. The orifinal account name was jsmith. I deleted him from active directory, then deleted him from the profile list in Sharepoint Shared Services. I could not find a way to delete him from the Sharepoint user list, but I reran the import after recreating his account (renamed it too just to be sure to "smithj"). At first, this did not wor, the user could still access all other resources but Sharepoint. then, some 30 minutes later it inexplicably started working. This morning, the user changed passwords, which immediatly broke the login on Sharepoint again. I am at a loss on how to troubleshoot this.

  Read the article

• Trying to create an image list based on what is defined as the order, and loosing

  - by user1691463

  I have a custom created module for Joomla 2.5 and within the params of the module, and have a loop that is not outputting as expected. I have the following parameters (fields) int he module: Order Thumb image Image Title Full-size image Now there are 10 sets of these group of 4 params. What I am trying to do is loop through each of the object sets, 10 of them, and on each iteration, build an HTML image list structure. The if statement is building the HTML structure for the sets that have an order value that is greater than 0, and the else is creating the html for those sets that do not have a value greater that 0. The goal is to create two variables and then concatenate the the strings together; the leading set are the sets that have an order defined. This is not happening and every thrid loop seems like it is missing. Here is the order as it is set in the 10 sets Set 1 = 0 Set 2 = 4 Set 3 = 1 Set 4 = 0 Set 5 = 5 Set 6 = 0 Set 7 = 0 Set 8 = 6 Set 9 = 3 Set 10 = 9 However, the outcomes is: 9 5 1 4 6 7 10 Instead of the expected: 3 9 2 5 8 1 (below here are those sets that were not greater than 0 in order of appearance) 4 6 7 whats wrong here that I can not see <?php for ($i = 1; $i <= 10; $i++) { $order = $params->get('order'.$i);#get order for main loop of 10 $active = ""; if ($order > 0) {#Check if greater than 0 for ($n = 1; $n <= 10; $n++) {#loop through all order fields looking and build html lowest to highest; $ordercheck =$params->get('order'.$n); if ($ordercheck == $i) { $img = $params->get('image'.$n); $fimage = $params->get('image'.$n.'fullimage'); $title = $params->get('image'.$n.'alttext'); $active = ""; $active = $active . '<li>'; $active = $active . '<a href="'.$fimage.'" rel="prettyPhoto[gallery1]" title="'.$title.'">'; $active = $active . '<img src="'.$img.'" alt="'.$title.'" />'; $active = $active . '</a>'; $active = $active . '</li>'; $leading = $leading . $active; } } } else { #if the itteration $order was not greater than 0, build in order of accourance $img = $params->get('image'.$i); $fimage = $params->get('image'.$i.'fullimage'); $title = $params->get('image'.$i.'alttext'); $active = $active . '<li>'; $active = $active . '<a href="'.$fimage.'" rel="prettyPhoto[gallery1]" title="'.$title.'">'; $active = $active . '<img src="'.$img.'" alt="'.$title.'" />'; $active = $active . '</a></li>'; $unordered = $unordered . $active; } $imagesList = $leading . $unordered; } ?>

  Read the article

• How do I finish this haiku? [closed]

  - by graphicdivine

  Broken old browser, Internet Explorer six, ...

  Read the article

• Is there any way to notify IE about changes done in registry via code?

  - by Mayur M

  Hi, I have done changes in registry (proxy settings) via Windows programming code. I have to restart (reopen) Internet Explorer each time I run the code to make those changes take effect. Is there any API in Windows programming through which I can notify Internet Explorer or Windows that changes are made to the registry and there will not be any need to reopen Internet Explorer to make those changes take effect? Thanks.

  Read the article

• How can I find which logon script is being run?

  - by user2517266

  I'm having an issue with network drives. Suddenly some computers and users aren't getting their mapped network drives from the logon script. I am NOT a domain admin, I don't have permission to login to the domain controller. And I know very little about Active Directory. The issue seems random, some users this day, different users tomorrow. Some computers run fine and some won't map no matter who logs in. They are mixed OS's XP (SP3), Vista, and 7. I was looking at the domain in windows explorer and I have found the batch file(s) that maps the drives in several locations, how do I know which one is actually being ran? The .bat file is located in \DOMAIN\NETLOGON\script.bat and \DOMAIN\SYSVOL\DOMAIN\scripts\script.bat and \DOMAIN\SYSVOL\DOMAIN\policies\GUID(Right? It's a crazy string)\User\Scripts\Logon\script.bat So, how can I figure out which one is actually being ran per computer or user? Cause they are all slightly different from each other and one of them doesn't map properly. Do all the files in NETLOGON get ran? Cause there are 15+ files in there. Or is it specified in Group Policy which one(s) get ran? EDIT: I am able to access a program called Active Directory Users and Computers, but the properties tab for any user is blank for the logon script.

  Read the article

• TGT validation fails, but only for one user

  - by wzzrd

  I'm seeing the weirdest thing here. I have a couple of RHEL3, 4 and 5 machines that validate user credentials through Kerberos with an Active Directoy domain controller as their KDC. This works for all of my users, save one. There is one account that is unable to log into RHEL3 Linux machines and generates the following errors there: May 31 13:53:19 mybox sshd(pam_unix)[7186]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=user May 31 13:53:20 mybox sshd[7186]: pam_krb5: TGT verification failed for `user' May 31 13:53:20 mybox sshd[7186]: pam_krb5: authentication fails for `user' Other accounts, like my own, are fine: May 31 17:25:30 mybox sshd(pam_unix)[12913]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=myuser May 31 17:25:31 mybox sshd[12913]: pam_krb5: TGT for myuser successfully verified May 31 17:25:31 mybox sshd[12913]: pam_krb5: authentication succeeds for `myuser' May 31 17:25:31 mybox sshd(pam_unix)[12915]: session opened for user myuser by (uid=0) As you can see, TGT validation fails. This only happens for this specific account, not for any other. The failing useraccount's password has been reset, I inspected both user objects in Active Directory, but I see nothing out of the ordinary. If I have the failing useraccount log into a RHEL4 or 5 box, there is not problem, so it must be RHEL3 specific, but the fact that only one account suffers from this, alludes me. Maybe someone has seen this before?

  Read the article

• How can I find out which processes on my computer are accessing the microphone?

  - by Vinayak

  After reading this interesting Lifehacker post and reading the comments on the page, one person was wondering if it would be possible to use the Physical Device Object Names of other hardware such as the microphone to find out the names of processes using that device. I tried the same approach, but so far it only seems to work for the webcam. Is there any other way I could get this to work in Process Explorer? UPDATE: The Lifehacker post was about finding out which Windows process is currently using your webcam. This is how they went about doing it: Start Device Manager (WIN+R → "devmgmt.msc" → OK) Find your webcam among the list of devices (check under Imaging Devices) Open the properties window of the device and switch to the Details tab (Right click → Properties → Details) In the dropdown menu, select Physical Device Object Name and copy the string(Right click → Copy) Download Process Explorer Make sure you have opened Process Explorer in Administrator Mode(File → Show Details for All Processes) Hit CTRL+F and enter the string you copied earlier(it should be something like \Device\000000XX) Hit the Search button and you should see a list of processes using the webcam(if there are any)

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >