Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 100/301 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Can I use dmraid instead of md (mdadm) to make software RAID-1 and RAID-1+0 volumes?

  - by Don MacAskill

  On a related question about SSDs and TRIM (see: Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux? ), it turns out that dmraid may now (or shortly) support TRIM on RAID-1. Typically, we've used md (via mdadm) to create our RAID-1 volumes, then used LVM to create volume groups, then formatted with the file system of our choice (ext4 lately). We've been doing this for years, and Google & ServerFault searches seem to confirm this is the most common way of doing software RAID with volume management. Google searches seem to suggest that dmraid is use for so-called 'fakeRAID' configurations where there's some level of hardware 'help' in the form of RAID BIOS in the controller, which we don't have (and don't want to use - we'd like a fully software solution). Since we'd like to use TRIM on our SSDs, and since md doesn't seem to (yet?) support TRIM, I'm wondering if it's possible to use dmraid instead of md to create RAID-1 (and RAID-1+0) volumes in software, with no hardware support (ie, just plugged into a dumb SATA/SAS bus)?

  Read the article

• Video compression artifacts in Flash

  - by lvanderhart

  This only started happening in the past two days, which seems very odd to me. Everything worked flawlessly up until now, and I use my my computer as my primary TV. Flash video from Hulu and Amazon, for no apparent reason, now have lots of artifacts in them. Some scenes are ok, but some are completely scrambled and unwatchable. My connection is a 15mb fios, and bandwidth tests indicate my connection speed is ok. I've tried the latest production version of Flash, as well as the 10.1RC4. Same problem. Enabling or disabling hardware acceleration in Flash makes no difference (with the scrambling issue, quality is better overall with hardware). Using a different H264 codec doesn't clean up the issue, although the scrambling does look different. I'm kind of stumped. The only thing I can think of now is to reinstall windows, which is obviously a drastic step. Edit: Forgot to say: Windows 7, Athlon 64X2, Geforce GTS 250

  Read the article

• Windows 7 Locking up Randomly

  - by Michael Moore

  I've got a Windows 7 machine that is locking up randomly. It can be in the first thirty seconds, or it can be hours later. There is nothing specific I can find that is running when it happens. When it locks, the screen doesn't change, but nothing moves. The waiting icon stops, the mouse stops, keyboard doesn't work, etc. I've even tried the crash on ctrl-scrl registry hack, and it won't even dump the kernel. I've run hardware diagnostics on the RAM and it doesn't find any problems. I would think it is a hardware issue, but on this exact same machine, I can run 64 Bit Ubuntu and it has zero problems. I've even tried reinstalling Windows7 from scratch, and it still happens. Anyone have any ideas? Any good diagnostic tools to recommend? Thanks! Michael

  Read the article

• Best RAID setup for multimedia fileserver?

  - by Mr. Schwabe

  I'm building a fileserver for my small office. We do film and multimedia design. Only 3 clients connected. The server is primarily for local access to graphic assets and video files. I'm looking for advice on hardware and software required. Particularly for the RAID. I have the following objectives: A) merged capacity I'd like all other systems to access the data as a single mapped network drive that has an initial capacity of 10 TB. So perhaps 5x 2TB drives (plus mirror drives for redundancy). B) easy way to increase capacity Thinking long term, I'd like to 'easily' add more drives to the array for a potential two or three fold increase in capacity. So theoretically it could get upto a 30 TB raid array consisting of maybe 15x 2 TB drives of capacity (plus mirror drives for redundancy). C) maximum fault tolerance I want at least 1 mirror drive per capacity drive (in laymen's terms). So if I start with 10 TB / 5x 2TB of capacity, I suppose I would need another another 5x 2TB drives to be mirrors. So 10 drives total. But I'd also like potential for even more redundancy; with upto 2 additional mirrors per 'capacity drive' (and to be able to add them to the array anytime with ease). D) easy way to monitor drive health I'd like an intuitive interface for managing the raid and monitoring drive health The other systems accessing this network drive will be running Windows, but also the odd Ubuntu and MacOS system as well. Are these objectives attainable? What type of RAID setup do you recommend? What hardware will be required? Also what OS do you think this system should be running? Does it really matter? I'm no network admin - just a long time Windoze user, without much Linux experience. That said, I'm not opposed to a Linux solution if it's easy enough and more practical than a Windows OS for this server. Or maybe something such as Openfiler. Budget should hit the sweet spot for value and performance (hence my preference to use 2TB drives). The biggest focus is storage; aside from that the system just needs to keep the drives running optimally with perhaps 2 or 3 clients accessing / writing files at any given time. The hardware quote would start with something like 10x 2TB WD Caviar Blacks; about $1900 for the storage + $x for remaining parts. http://ncix.com/products/index.php?sku=42775&vpn=WD2001FASS&manufacture=Western%20Digital%20WD Your advice is appreciated, thanks!

  Read the article

• XP shared folders not accessible after BIOS changed

  - by stijn

  Here's what worked for over a year: PC A runs Windows 7, PC B runs Windows XP. Both are on the same subnet behind a router. A uses user account X, but logs in to PC B using the Administrator account. PC B is a Dell Precision 470. A known problem with these is that sometimes when plugging in their power cable they somehow loses all BIOS settings. This happened yesterday. After this happens Windows won't boot, because the default BIOS setting is 'RAID ON' while there is no RAID configured. No problem though, changing the BIOS settings to 'RAID OFF' makes it boot without problems. Note that in the meantime, nothing config-related was changed on machine A. It wasn't even on. Indeed after doing this, everything is fine. Everything includes all normal operations, remote desktop from PC A to PC B, running Synergy between A and B, accessing shared folders from B to A. But accessing the shared folders on B from A does not work any more. I tried pretty much everything I found via Google (fiddling with policies/registry kes/...) but no avail. > ping -a 192.168.2.2 Pinging A [192.168.2.2] with 32 bytes of data: Reply from 192.168.2.2: bytes=32 time<1ms TTL=128 > net view \\192.168.2.2 System error 5 has occurred. Access is denied. > net use /persistent:no K: \\A\myshare /user:A\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:192.168.2.2\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:USERNAME PASSWORD System error 86 has occurred. The specified network password is not correct. A solution to this would be great: I haven't been able to do any work since yesterday ;] update after taking the hard drive out of B and putting it in another Precision 470 with almost exactly the same hardware (at first sight, only the video card differs) the shared folders work.. Putting the disk back into A, same problem remains. Why does this depend on hardware, and more important, on which hardware?

  Read the article

• Beginners advice on Small business network disk(s)

  - by Rob

  We are having 10 PCs used by various user and presently use one network disk (a LaCie NAS) for all our data. Everything is Windows Vista and our collective IT hardware knowledge is minimal. This worked well generally. However, recently the disk freqently loses connection from the network (2-3 times per week) and the only way back seems to be the "turn it off and back on" trick. This obviously cant be any good for the disk. I understand that there are various more sophisticated ways of storing data and was wondering what people would recommend. One of the worries is obviously disk failure (either in part or as a whole) and the lack of continued availability due to network issues. I would guess that a disk which replicates data wouldnt work as a sole solution due to the network connection, but dont know what hardware (and/or software) would/could work in our case. In terms of size, we are looking at very small amounts, ie. less than 500 GB in total.

  Read the article

• Limit disk I/O one program creates?

  - by Posipiet

  Hardware: one virtualization server. Dual Nehalem, 24GB RAM, 2 TB mirrored HD. Software: Debian, KVM, virt-manager on the server with several virtual machines that use Linux too. 2 TB Disk is a big LVM, each VM gets a logical volume and makes its own partitions in that. Problem: One of the programs that runs on one of the VMs creates huge disk load. This never was an issue, because the program never ran on such a powerful hardware. Now the CPUs are fast, and lots of I/O is the result. We cant do much against that at the moment, because the tool is a black box. On the other hand, the speedy computation is welcome. The program creates about 5 GB of temp files which get overwritten during the next iteration. Question: How can we limit the disk I/O for the process?

  Read the article

• smallest footprint for Web Application server?

  - by edgardodelamanta

  There are times when you need to spare hardware resources (either to keep using legacy hardware, to play the embedded card, or just to be efficient because a large footprint is trashing CPU caches, leading to unacceptable levels of idle-states). In this spirit, some efforts have been made to make 'light' ports of Java or Mono (C# for Linux), and they range in the 80-50 MB (instead of the 100-200 MB). Add a Web server (Apache, IIS, etc.) to the scripting engine and you can happily dive into the GB (IIS + .Net) only to load the tool in memory. Anybody with more modest tools in the specs area?

  Read the article

• Creating a vm using Hyper-V causes the host of BSOD

  - by Arcass

  Hi, Problem description: When I try to create a virtual machine, the host bsod part way through the process. From the logs in lookes to fail/hang on the "Creating new VirtualDisckDriver with new VHD" step. The BSOD error code is SYSTEM_SERVICE_EXCEPTION : STOP:0x0000003B When the machine has finished restarting, it looks to have created the vhd and XML files for the vm but it isn't accessable. I have two server bothing behaving in exactly the same way, so I don't believe it's a hardware fault. Has anyone had a similar experince? How did you resolve the problem? NOTES Hardware: HP DL380 G6 BIOS : 2010.03.30 (14 Apr 2010) [Latest from HP website] Inter Hyperthreading: Disabled Intel Virtuazation Technology : Enabled No-Execute Memory Protection: Enabled Mem check reports no errors OS: Windows 2008 Sp2 x64bit fully updated regards Arcass

  Read the article

• Ubuntu 12.04 crash analysis - strange binary data on all open files at the moment of crash

  - by lanbo

  A couple of hours ago we got a system crash on Ubuntu 12.04. We checked all the log files and there is nothing suspicious to blame to. Last stuff that was logged was some dovecot activity. There are no kernel panic messages. Nothing. It is a new server (new hardware) we are testing before production. And because it is new hard, I'm suspicious the problem may be due to some faulty hardware. We already run memtester with no problem detected. I'll be happy to hear from other hardware testing tools (the machine has SSD). Anyway, the thing I wanted to ask you is a different one. The strange thing is on every open file at the moment of the crash we found the next sequence of symbols was written into them: "@^@^@^@^@^@^@...". For example, on the syslog log file we got: Apr 16 15:53:56 odyssey dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<info>, method=PLAIN, rip=46.29.255.73, lip=5.9.58.177 ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^ [these continues for about 1000 chars...] ^@^@^@^@Apr 16 15:55:12 odyssey kernel: imklog 5.8.6, log source = /proc/kmsg started. We got all these symbols in all open files. These include: syslog, mail.log, kern.log, ... But also on some logs that are output by php scripts run in CRONs from user accounts (not root). So, any idea why all open files got these characters written during the crash? This is pretty bad since the crash corrupted many files (we don't even know which other ones may be affected). We are suspicious that all open files (in write mode maybe) at the moment of the crash got all these symbols inserted. Why is that? BTW [in case it helps], the system automatically rebooted after the crash but Apache did not start. There were not traces in /var/apache2/*log why apache did not start. After running a "service apache2 start" it started with no problems. Also, we rebooted the machine manually and Apache also started on reboot. But it did not start after the crash and no errors were reported. Thanks guys!

  Read the article

• Anti Aliasing dead

  - by Gazoza

  I have a problem with anti-aliasing. No matter the software settings, it seems to be gone. I tried driver updating and reinstalling, cleaning of the hardware, different monitor with different cablies, OS reinstalling and changing, none of which helped. I decided to change the graphic card, but that didn't work either. Moreover, I have a distinct impression that the jagged edges are worsening as time goes by. I think this is a hardware-related issue, but I don't know exactly what to do. If anyone here had similar troubles, and/or has an idea how to cope with them, I'd be very grateful. My current card is a nVidia GT610.

  Read the article

• AMD Processors and the Windows Phone 8 Emulator

  - by Aj Patel

  I would madly appreciate it if anyone in this community would help me with my question. The background is that I want to develop Windows Phone 8 applications but both of my current computer processors do not have Hardware Virtualization & Second Level Address Translation that are needed to run the Emulator. I have my eyes on an AMD computer g7-2243us (I like it because it has 1600x900 screen res). I looked up this Link that shows that this computer's AMD processor (Next Gen AMD Quad-Core A8-4500M Accelerated 1.9GHz up to 2.8GHz 4MB L2 Cache Processor) supports AMD-V Hardware Virtualization. So, will this computer be able to run the emulator? Thank you so much for your answers. I'm pretty sure it will run the emulator, but I just want to make sure before spending $400. Thank You all So Much.

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Windows 7, Drivers, Cloning and Sysprep

  - by Frank Thornton

  I have Windows 7 working on one machine but when I move it off to the new machine it crashes. If this is a driver issue do I need to download the drivers and install them first? Or do I install Windows 7 on the new machine first then copy the drivers folder over to the other disk so it will boot up correctly? EDIT: I was trying this as well: http://www.todo-backup.com/support/tutorial/redeploy-system-to-dissimilar-hardware.htm EDIT: I tried sysprep but on bootup I see the Windows logo then the system crashes. I can stick the drive back in the old hardware and it runs fine.

  Read the article

• sonicwall nsa 240

  - by Adam

  Hi We are looking into putting a hardware firewall into a data center to protect our rack of servers. We are using the servers for terminal services and we have 2 x 1GB connections to the Internet. We have about 50 servers supporting about 250 users which will grow very soon to 500 users. We plan to purchase 2 hardware firewalls to provide HA. Do you think the Sonicwall NSA 240 with Total Secure is a good match for this in terms of performance and protection (from spyware, virus etc?) or is there a better purchase? (Maybe a Watchguard X5 or X8?)

  Read the article

• Restart my graphics card without rebooting?

  - by defaye

  Wondered if it is possible to use DevCon to restart a display device as a stop-gap solution to artifacts left over from a graphics card malfunction? In particular it leaves my cursor very un-user-friendly: I found out the hardware ID of my display adapter through device manager (below) [(windows key + pause break) - device manager - display adapters - right click your display adapter - properties - details - hardware ids.] I tried the commands (opened with admin privileges) devcon restart "PCI\VEN_1002" and devcon restart =display but it always come back with No devices restarted.. Is it even possible to restart the graphics card without a system reboot?

  Read the article

• How long will the serial port be around for?

  - by Andy

  It seems that the serial port has a remarkable ability to stick around. You might call it the hardware equivalent of Windows XP. Despite pretty much physically disappearing from laptops and the like, the need to use a serial port still exists, even if it means using a converter of some sort. It is very much a legacy piece of hardware, and yet so many devices and instruments still use it. I use it myself daily in my work with PLC's, HMI's, barcode readers, etc. In my opinion, I don't think it is going anywhere soon, but how long do you think it has got before joining the museum? Do you think it ever will?

  Read the article

• Application to use for Winfast DTV1000T Tuner card

  - by lagerdalek

  The WinFast application that they have built for the purpose is pretty typical of hardware vendor built software, and was looking for something nicer.

  Read the article

• What is causing a vm to exhibit packet loss?

  - by Joe Philllips

  We have a pretty nice piece of hardware set up to run multiple virtual machines in vmware and one of the vm's is an instance of Windows Server 2003 running SQL Server 2005. For some reason we occasionally see 10-20 seconds of straight packet loss to this machine from remote machines (my workstation) as well as other vm's on the same physical hardware. I am using PingPlotter to keep a close eye on the packet loss. So far we've turned off flow control on the NIC but we are already running out of other things to try. What might be causing this and how can I identify the problem? Note: We also have another server with a very similar configuration with the same type of problem to a lesser extent (because its not used as heavily?)

  Read the article

• What kind of SATA interface is on a Thinkpad X120E?

  - by Jorge Castro

  I recently ordered a Thinkpad X120E with an AMD Fusion (Zacate) chipset. I am eyeballing an SSD for it, however newer SSDs are coming out with 6Gbps SATA interfaces. I doubt such a cheap laptop has 6Gbps SATA, but I'm debating waiting the a bit longer until the Intel 510 series come out, if anything to future proof myself by putting it in this laptop and then later on when I do upgrade to a laptop with 6Gbps SATA I'll be good to go. The hardware manual mentions that the motherboard is for a "AMD Fusion E-350" but the specifications of each hardware part isn't part of the manual. Does anyone have any information on the kind of SATA controllers in Fusion laptops so I can make a better purchasing decision?

  Read the article

• Windows 8, NVIDIA graphics recognition fails

  - by Roy Grubb

  I just installed Windows 8 Pro OEM 64-bit (clean install) and it won't properly recognize my graphics adapter. When I installed Win8, it automatically installed the BasicDisplay.sys driver dated 6/21/2006. 6.2.9200.16384 (win8_rtm.120725-1247). Hardware - Mobo:MSi G41M-P33 Combo CPU:Intel CoreDuo 6600 Graphics:NVIDIA GeForce 9400GT *OS* - Windows 8 Pro 64-bit OEM The graphics adapter worked fine in Windows XP. The PC is a generic box, bought locally and its mobo failed recently, so I replaced it with the G41M. Microsoft wouldn't let me re-activate Windows XP with a different mobo, so I installed Win8, which appears to work except as described next. Win8 only partially recognizes the graphics adapter and won't allow NVIDIA latest driver installer to see that it's an NVIDIA card. As a result, OpenGL doesn't work, and this is needed by the software I most use. Other than that the graphics look OK. When I say 'partially recognizes', I mean that via the Control Panel, I can see that the adapter is described as NVIDIA, but the driver remains stuck at Microsoft Basic Display Adapter no matter what I try, including "Update driver..." in adapter properties. Display Screen Resolution Advanced Settings Adapter shows: Adapter Type: Microsoft Basic Display Adapter Chip Type: NVIDIA DAC Type: NVIDIA Corporation Bios Information: G27 Board - p381n17 Don't know what this means ... no mention of 9400GT Total Available Graphics Memory: 256 MB Dedicated Video Memory: 0 MB In fact the adapter has 512MB on-board video memory. System Video Memory: 0 MB Shared System Memory: 256 MB And Control Panel Device Manager Display adapters just shows Microsoft Basic Display Adapter. No other graphics adapter, and no unknown device or yellow question mark. What I have tried so far: 1. Cleared CMOS and reset. Updated BIOS and all mobo drivers as follows: 1st I used Driver Reviver to see if any driver updates were required. It found some but I didn't use that to get the drivers. Then I switched to MSi's own mobo driver utility Live Update 5. This also showed the board needed to update several so I used it to fetch the new drivers. After that it showed that everything was up to date and I checked with Driver Reviver again, which also reported no drivers now needed updating. Rebooted. Went to the NVIDIA site to get the latest graphics adapter driver. Their auto-detect "Option 2: Automatically find drivers for my NVIDIA products" said "The NVIDIA Smart Scan was unable to evaluate your system hardware. Please use Option 1 to manually find drivers for your NVIDIA products." So I downloaded 310.70-desktop-win8-win7-winvista-64bit-international-whql.exe, which lists 9400 GT under supported products, but when I run it, it says: "NVIDIA Installer cannot continue This graphics driver could not find compatible graphics hardware." Connected the display to the on-board Intel graphics (G41 Intel Express), removed the NVIDIA card and rebooted, changed to internal graphics in CMOS. Again it installs the MS Basic Display Adapter, and can't properly run my s/w that needs OpenGL. It runs on other machines with Intel Express graphics (WinXP and 7) Shut down and pulled out the power cord. Held start button to discharge all capacitors. Removed and re-inserted NVIDIA adapter in PCI-E slot and made sure properly seated. Connected the monitor to the card, screwed plug to socket. Reconnected power cord. Started and checked in BIOS that Primary Graphics Adapter was set to PCI-E. Started Windows. Uninstalled MS Basic Display Adapter in Device Manager. Screen blanks briefly, reappears. No Graphics adapter entry was then visible in Device Manager. Restarted PC. MS Basic Display Adapter Visible again in Device Manager. Clicked in Device Manager View Show hidden devices. No other graphics adapter appears, no unknown devices. Rebooted. Tried Scan for Hardware changes. None detected. Tried right-click on MS Basic Display Adapter Properties Driver Update Driver... Search automatically. It replied that it had determined driver was up to date. I checked that there were no graphic driver-related entries in Programs and Features that I could delete (none). Searched for any other drivers with nvidia in their name and deleted them, just keeping the 306.97 installer exe file. Did a Windows Update. Ran GPU-Z which shows (main items): Microsoft Basic Display Adapter GPU G72 BIOS 5.72.22.76.88 Device ID 10DE - 01D5 DDR2 Bus Width 32 Bit Memory size 64MB Driver Version nvlddmkm 6.2.9200.16384 (ForceWare 0.00) / Win8 64 NVIDIA SLI Unknown in the drop-down at the foot, "Microsoft Basic Display Adapter" is the only option If I swap hard disks in that machine to one with a Ubuntu 10.4 installation (originally installed on the same PC), lspci shows "VGA compatible controller as NVIDIA Corporation Device 01d5 (rev a1) (prog-if 00 [VGA controller])" and "kernel driver in use: nvidia" I'm out of ideas for new things to try and would be really grateful of suggestions. Thanks!

  Read the article

• Opera12 browser support for WebGL

  - by Sneha

  I have enabled - enable webGL by entering Enable WebGL in opera:config by setting the value to 1, and Enable Hardware Acceleration similarly, then restart the browser - Opera 12 on Windows & tried to open - http://aleksandarrodic.com/p/jellyfish/. This gives me an alert saying - Your browser failed to initialize WebGL. Please guide me on - What's going wrong? opera:gpu says : Hardware acceleration Disabled Direct3D 10 Backend not supported Could not load library OpenGL Backend not supported Could not load library But,same thing (http://aleksandarrodic.com/p/jellyfish/) works fine on Chrome! Thanks Sneha

  Read the article

• Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

  - by CapBBeard

  Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >