Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 101/173 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Impossible to enable bluetooth under Ubuntu

  - by PCh

  I just installed Ubuntu 12.04 (dual boot, kept Windows just in case) on my new Acer Aspire One 756-877. As soon as I installed it I also installed the Broadcom driver, since wifi wasn't working, and that solved it right away. But when I tried Bluetooth, I had a problem that I see is quite recurring: -The hardware is on (and working fine under Windows) -The icon shows up on the menu, giving me the options of turning Bluetooth on or off, and then just "Bluetooth preferences". -I can apparently turn it on that way, which only lights up the icon but makes no difference at all (and doesn't give any other options in the Bluetooth menu) -When I open "Bluetooth preferences" (whether Bluetooth is apparently on or off, it makes no difference), it says it's disabled and will not let me slide the button to enable it. I've rebooted, but nothing happens. -The material is Broadcom and the port (if it's relevant at all) is Port_#0001.Hub_#0003 I tried the following commands suggested in other similar questions, with no result at all: sudo dmesg | grep blue and sudo service bluetooth start and sudo /etc/init.d/bluetooth start Any other clues on what I can do? Thanks for your time!

  Read the article

• How do I stop sound coming from my speakers with a faulty headphone socket?

  - by Andy

  On my laptop, I have a faulty headphone socket, so when I insert headphones into it, the speakers do not mute. I can confirm that this problem is caused by faulty hardware and not software as when I twist the headphone jack, the speakers come on and off according to the movements. On previous versions of Ubuntu, I worked around this problem by going into alsamixer and disabling "Auto-Mute Mode", and then going into the sound settings and choosing "Analog Headphones". However, on 12.04, no such option exists, rendering my headphones unusable with no way to work around the problem. I momentarily thought I had this problem fixed when I installed PulseAudio Volume Control from the Software Centre. I selected the Output Devices tab, and under "Built-in Audio Analogue Stereo" I selected "Headphones" for the port. However, this almost randomly seems to change back to "Speakers", despite me setting "Auto-Mute Mode" as disabled. Basically, I would like a way to permanently mute the speakers so only the headphones will play sound, without it losing my settings. It is ridiculous that such a simple setting has been taken away to "simplify" the user interface.

  Read the article

• QapTcha error issue. Works locally, not on live server [migrated]

  - by BlassFemur

  I am adding QapTcha (http://demos.myjqueryplugins.com/qaptcha/) to a website that I am working on and I'm getting the error "Uncaught TypeError: Cannot read property 'error' of null". What's weird to me is everything is working perfectly locally. No errors or anything. Once I uploaded via ftp to the live server, I get the above error. Below is the block of code that seems to be generating the error: Slider.draggable({ revert: function(){ if(opts.autoRevert) { if(parseInt(Slider.css("left")) (bgSlider.width()-Slider.width()-10)) return false; else return true; } }, containment: bgSlider, axis:'x', stop: function(event,ui){ if(ui.position.left (bgSlider.width()-Slider.width()-10)) { // set the SESSION iQaptcha in PHP file $.post(opts.PHPfile,{ action : 'qaptcha', qaptcha_key : inputQapTcha.attr('name') }, function(data) { if(!data.error) Uncaught TypeError: Cannot read property 'error' of null { Slider.draggable('disable').css('cursor','default'); inputQapTcha.val(''); TxtStatus.text(opts.txtUnlock).addClass('dropSuccess').removeClass('dropError'); form.find('input[type=\'submit\']').removeAttr('disabled'); if(opts.autoSubmit) form.find('input[type=\'submit\']').trigger('click'); } },'json'); } } }); I'm not really sure what's going on as to why it works locally and not on the server. Any help/ suggestions would be appreciated. Thanks

  Read the article

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• Oracle SOA Suite for healthcare integration Dashboard

  - by Nitesh Jain

  Oracle SOA Suite Healthcare came up with a new way of monitoring where user can configure a dashboard and follow the dynamic runtime changes.Oracle SOA Suite for healthcare integration dashboards display information about the current health of the endpoints in a healthcare integration application. You can create and configure multiple dashboards as needed to monitor the status and volume metrics for the endpoints you have defined. The Dashboards reflects changes that occur in the runtime repository, such as purging runtime instance data, new messages processed, and new error messages. You can display data for various time periods, and you can manually refresh the data in real time or set the dashboard to automatically refresh at set intervals.Dashboard shows the following information: Status: The current status of the endpoint, such as Running, Idle, Disabled, or Errors. Messages Sent: The number of messages sent by the endpoint in the specified time period. Messages Received: The number of messages received by the endpoint in the specified time period. Errors: The number of messages with errors for the endpoint in the given time period. Last Sent: The date and time the last message was sent from the endpoint. Last Received: The date and time the last message was received from the endpoint. Last Error: The date and time of the last error for the endpoint.  It also shows the detailed view of a specific Endpoint The document type. The number of messages received per second. The total number of message processed in the specified time period. The average size of each message.

  Read the article

• ALPS touchpad stops working after reboot

  - by user58289

  I recently upgraded to 12.04 LTS. My Compaq Presario CQ-40 324la touchpad worked after first restarting after installation. But after restarting a second time, the touchpad is completely disabled, without having changed anything in the system. I've tried solutions but haven't had good results. The applications I've installed (fro "solutions" are: Pointing Devices Synaptiks Dconf-Tools I've also tried updating GRUB, adding this line: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.nomux") I tried these commands in a terminal. Neither has worked. sudo modprobe -r psmouse sudo modprobe psmouse proto=imps El Touchpad ALPS se desactiva al reiniciar Recién he actualizado a Ubuntu 12.04LTS y a mi parecer ha mejorado mucho con respecto a 11.10... Pero ese no es mi punto ahora. El Touchpad funcionó correctamente luego del primer reinicio después de la instalación. Pero luego de volver a reiniciar, el Touchpad queda totalmente deshabilitado sin haber hecho cambio alguno en el sistema. He probado las soluciones en su mayoría y no he tenido buenos resultados. Las aplicaciones que he instalado (de las "soluciones") son: -Dispositivos apuntadores. -Synaptiks -DConf-Tools Y he intentado también actualizando el grub (añadiéndole una linea así: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.nomux") Intenté en la terminal con el comando: sudo modprobe -r psmouse sudo modprobe psmouse proto=imps Ninguno me ha resultado bien. La laptop es Compaq Presario CQ-40 324la

  Read the article

• Simple dependency tree diagram generator

  - by foampile

  I have a need to produce a simple dependency tree diagram. The input data would be in the following simple format: ITEM_NAME DEPENDENCY ---------------------------- ITEM_101 ITEM_75 ITEM_102 ITEM_77 ITEM_102 ITEM_61 ITEM_102 ITEM_11 This means that ITEM_101 depends on ITEM_75 and ITEM_102 depends on items ITEM_77, ITEM_61 and ITEM_11. So the diagram would have items ITEM_77, ITEM_61 and ITEM_11 in one vertical level and ITEM_102 would be below it with a line connecting each of the three dependencies to ITEM_102. The same would be for ITEM_101, ITEM_75 would be somewhere above it and there would be a line connecting it. In the real world this tree represents a hierarchy of scheduling jobs. We have a very extensive workload automation hierarchy in Autosys and I have heard that its front end utility has something like this tree visual representation, however, for some reason, that utility has been disabled by admins. My business users want to see this hierarchy in an easy-to-consume format. I was hoping that I won't have to program something like this from scratch because it seems like quite a common reporting requirement and the input data is simply formatted. My question is: is there a FOSS tool that takes standardized data input and produces such a hierarchical tree? Thanks

  Read the article

• Still can't mount windows 8 drive after restart

  - by Ishai Bloch

  After following the instructions in other posts, I am still getting the same error when I try to mount my Windows 8 drive in Ubuntu 14.04 on a dual boot system. I have disabled fast start after shutdown, hybrid hibernation, and the preinstalled Asus Instant On service. I have tried restarting Windows rather than shutting down. In all cases I get the same error message, namely: Error mounting /dev/sda4 at /media/jesse/OS: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda4" "/media/jesse/OS"' exited with non-zero exit status 14: Windows is hibernated, refused to mount. Failed to mount '/dev/sda4': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option. I did not have the same issue before upgrading from Ubuntu 12 to 14. For what it's worth my computer is supposedly a "hybrid" with an SSD drive installed, although I can't see that the SSD drive is being used at all with my present settings. Any thoughts?

  Read the article

• Nivida driver install

  - by Adham

  tried black listing and every thing i could find on the internet used with root and alt+ctrl+f1 with no solution nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Mon Jun 17 08:35:25 2013 installer version: 319.23 PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin nvidia-installer command line: ./nvidia-installer Using: nvidia-installer ncurses user interface -> License accepted. -> Installing NVIDIA driver version 319.23. -> Running distribution scripts executing: '/usr/lib/nvidia/pre-install'... -> done. -> The distribution-provided pre-install script failed! Continue installation anyway? (Answer: Yes) ERROR: The Nouveau kernel driver is currently in use by your system. This driver is incompatible with the NVIDIA driver, and must be disabled before proceeding. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver. WARNING: One or more modprobe configuration files to disable Nouveau are already present at: /etc/modprobe.d/nvidia-installer-disable-nouveau.conf. Please be sure you have rebooted your system since these files were written. If you have rebooted, then Nouveau may be enabled for other reasons, such as being included in the system initial ramdisk or in your X configuration file. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.

  Read the article

• Installing Xubuntu alongside with UEFI

  - by Geo

  For the past week and a half I have been trying to figure out how to install Xubuntu 13.10 alongside the Windows 7 install I have on my laptop (ASUS X501A with UEFI) and I'm pretty much at my wit's end. Could someone point me to set of thorough instructions on installing Xubuntu (or any of the Ubuntu derivatives) on a HDD under UEFI alongside Windows 7 64-bit Home Premium? Preferably one that also covers GRUB/bootloader problems that come afterwards. A few additional details: Motherboard does have UEFI. I've disabled Secure Boot and Fast Boot. Launch CSM is enabled and the platform keys are not installed (these settings allow me to at least boot Windows 7). I set the HDD's partition table to GPT through GParted before I installed Windows. I'm installing from a bootable USB that has been created through a tool called Rufus with the GPT partition scheme for UEFI computers option, otherwise I've left it at default. I am able to boot into Xubuntu in UEFI mode, but I'd much rather be able to see the option: Install Xubuntu Alongside Windows 7 (or however it's phrased), Xubuntu seems to be unable to recognize that Windows 7 is installed. I do have access to a bootable USB stick containing GParted though Xubuntu seems to come preinstalled with it. If there's anything else that might be of help, please let me know.

  Read the article

• How to efficiently protect part of an application with a license

  - by Patrick

  I am working on an application that has many functional parts. When a customer buys the application, he buys the standard functionality, but he can also buy some additional elements of the application for an additional price. All of the elements are part of the same application executable. A license key is used to indicate which of the elements should be accessible in the application. Some of the elements can be easily disabled if the user didn't pay for it. These are typically the modules that you can access via the application's menu. However, some elements give more problems: What if a part of the data model is related to an optional part? Do I build up these data structures in my application so the rest of my application can just assume they're always there? Or do I don't build them, and add checks in the rest of may application? What if some optional part is still useful to perform some internal tasks, but I don't want to expose it to the user externally? What if the marketing responsible wants to make a standard part now an optional part? In all of my application I assume that that part is present, but if it becomes optional, I should add checks on it everywhere in the application. I have some ideas on how to solve some of the problems (e.g. interfaces with dual implementations: one working implementation, and one that is activated if the optional part is not activated). Do you know of any patterns that can be used to solve this kind of problem? Or do you have any suggestions on how to handle this licensing problem? Thanks.

  Read the article

• GRUB2 not working after installing xubuntu 14.04

  - by h3bm

  I have a vaio laptop and it used to have installed windows 8 and Xubuntu 13.04 in dual boot, everything was working fine. I decided to update my version of xubuntu 14.04 LTS mainly because the support for 13.04 is finished and LTS version have 3 years of support. What I did was to format the partition where xubuntu 13.04 was installed and install 14.04 in that formated partition. When I restarted my computer willing to start using my new system I got the following message: error: symbol 'grub_term_highlight_color' not found and I was not able to enter any OS. I tried boot-repair from live USB more than two times and it did not fix the problem. I tried to enter to my computer using super GRUB2 disk, however it does not apperar to work with UEFI active (besides super grub2 disk says it can) I only get the message "no operating system found". If I boot super grub2 disk with UEFI disabled, super grub2 disk can not detect any OS,I also tried Rescatux distro, however, as of super grub2 disk, rescatux cannot enter when UEFI is active. I tried boot-repair with the option of "restore EFI backups", after that I was able to boot on windows, but no grub menu appeared. I ran boot-repair again with no improving results Here is the last Bootinfo report I got: http://paste.ubuntu.com/7609801/ Do you have any idea of what is happening? I really appreciate your help, Best regards,

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• 13.10 doesn't boot on Vaio Pro 13

  - by vaioonbuntu

  I just installed Ubuntu 13.10 on my new Vaio Pro 13, disabled safe mode, but used UEFI and not legacy mode. I did an encrypted LVM installation and erased the complete SSD. It booted just fine from USB, but after installation it doesn't boot. The Vaio failed boot screen appears. I then tried this advice here: 13.10 on vaio pro with UEFI sadly it fails for me with "/usr/sbin/grub-probe: error: failed to get canonical path of /cow." I then tried mounted the encrypted partition with Nautilus and tried this: Cannot update grub with paramters on live USB With /dev/sda2 and then to install GRUB to /dev/sda. Didn't succeed and warned me that the "GPT partition label contains no BIOS Boot Partition; embedding won't be possible" What do i have to do, go fix GRUB and be able to boot my finished install? Here's my Boot Repair Log: http://paste.ubuntu.com/6386598/ I would really appreciate any help, I'm so happy to finally be able to ditch my big fat Macbook Pro and use Ubuntu on my new, light Vaio Pro, if only I could fix GRUB. best, x

  Read the article

• Electricsheep Not Working in Raring 13.04

  - by Nhoeh37

  I just downloaded Electricsheep four days before I updated my Ubuntu software and I fell in love with it. After I upgraded to 13.04, I'm kind of upset in saying that Electricsheep no longer works. I have no idea how to fix it and I feel helpless with Linux. As I said, it was working completely fine in 12.10, but now with the Raring Ringtail update: I use Xscreensaver to launch Electricsheep. When I open Xscreensaver, "Electricsheep" is one of the options to choose. When I "preview" ES or even launch the "xscreensaver-demo" in the terminal, it doesn't work anymore; I get an error message. The error message says: "detected another electric sheep process. rendering of sheep is disabled using read only access." Damnit, can someone please help me? I want my trippy screensaver back, it shouldn't be this hard! EDIT: I contacted the creator of Electricsheep (Scott Draves) via the link to his email address on his personal website and asked for his assistance. Hopefully the Askubuntu community will be able to fix this problem, I'm sure I am not the only one who is having this problem as I have searched and searched.

  Read the article

• Can't run minecraft on ubuntu 12.04 lts [duplicate]

  - by user170011

  This question already has an answer here: How to correctly install and troubleshoot Minecraft (Client) 3 answers I was trying to run minecraft on my laptop with ubuntu 12.04 lts 64 bit. I have a lenovo ideapad p580 with 7.7 Gb and an Intel® Core™ i7-3520M CPU @ 2.90GHz × 4 processor. Under the graphics section of the system overview in ubuntu it says I have none installed. My computer comes with and nvidia geforce graphics card but it isnt recognized. When I start minecraft I get this crash report. ---- Minecraft Crash Report ---- // Shall we play a game? Time: 24/06/13 7:23 PM Description: Failed to start game org.lwjgl.LWJGLException: Could not init GLX at org.lwjgl.opengl.LinuxDisplayPeerInfo.initDefaultPeerInfo(Native Method) at org.lwjgl.opengl.LinuxDisplayPeerInfo.<init>(LinuxDisplayPeerInfo.java:52) at org.lwjgl.opengl.LinuxDisplay.createPeerInfo(LinuxDisplay.java:684) at org.lwjgl.opengl.Display.create(Display.java:854) at org.lwjgl.opengl.Display.create(Display.java:784) at org.lwjgl.opengl.Display.create(Display.java:765) at net.minecraft.client.Minecraft.a(SourceFile:235) at avv.a(SourceFile:56) at net.minecraft.client.Minecraft.run(SourceFile:507) at java.lang.Thread.run(Thread.java:679) A detailed walkthrough of the error, its code path and all known details is as follows: -- System Details -- Details: Minecraft Version: 1.5.2 Operating System: Linux (amd64) version 3.5.0-34-generic Java Version: 1.6.0_27, Sun Microsystems Inc. Java VM Version: OpenJDK 64-Bit Server VM (mixed mode), Sun Microsystems Inc. Memory: 406175448 bytes (387 MB) / 514523136 bytes (490 MB) up to 1908932608 bytes (1820 MB) JVM Flags: 2 total; -Xmx2048M -Xms512M AABB Pool Size: 0 (0 bytes; 0 MB) allocated, 0 (0 bytes; 0 MB) used Suspicious classes: No suspicious classes found. IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 LWJGL: 2.4.2 OpenGL: ~~ERROR~~ NullPointerException: null Is Modded: Probably not. Jar signature remains and client brand is untouched. Type: Client (map_client.txt) Texture Pack: Default Profiler Position: N/A (disabled) Vec3 Pool Size: ~~ERROR~~ NullPointerException: null I can run it on different versions of linux such as fedora.

  Read the article

• Cannot use second display with 12.04 and Intel 2000/3000

  - by Carolyn Marenger

  I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

  Read the article

• Notification framework for object lifecycle

  - by rlandster

  I am looking for an application, framework, or library that would help us with "object life-cycle management". There are many things that are created for users, departments, and services that, all too often, are left unmanaged. Some examples: user accounts groups SSL certificates access rights databases software license provisionings storage list-serve accounts These objects are created and managed by a wide variety of applications and systems. Typically, a user (person) requests (either explicitly or implicitly) one of these objects. A centralized management tool would help us manage such administration chores as: What objects does user X currently own/manage? Move the ownership of object P to user X; move all objects owned by user X (who was just been fired) to user Y. For all objects of type T that have expired be sure the objects have been disabled or deleted by their provider. How many active (expired, about-to-expire) objects of type P are there? Send periodic notifications to all users who own active objects of type P reminding them of what they own. There is a security alert for objects of type P; send a notification to all users who own these types of objects to take a specific remedial action. Delete or disable a set of objects based on expiration (or some other criteria). These objects are directly managed through their own applications (Active Directory, MySql, file systems, etc.) and may even have their own notification systems, but I want to centralize this into an "object management system". The OMS should allow the association with an external identity provider that defines who the users and groups are (e.g., LDAP, Active Directory) creation of objects association of an object to a specific user and/or group association with an expiration date creation of flexible reporting including letting users know what objects they currently own and their expiration dates integration with an external object "provider" via a plug-in We could write something from scratch, but I am hoping there is something already out there that will help, either an entire application or a set of libraries that provide much of what is needed. Any ideas?

  Read the article

• Cannot Create Bootable USB Drive from .iso file

  - by tarabyte

  I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

  Read the article

• How to tune touchpad for smaller area?

  - by M.L.

  I just purchased the Asus Zenbook UX31A and I require some advice regarding tuning the touchpad. Basically my problem is that the mouse buttons are withing the touch area and I would like it to be disabled. Such that only part of the touch area is recognized. I have attached an image to clarify the idea. Basically only the red area in the image should be recognized. I have two reasons for this request. Firstly, I like to hold my thumb on the mouse button instead of holding it in the air. This is problematic, because touchpad thinks that I'm trying some kind of two finger gesture all the time and cursor stops moving. Clicking is also problematic since every finger movement -- regardless of how insignificant it might be -- on the "button" will move the cursor. I have been playing with some synclient settings like AreaBottomEdge etc. They have some effect but then I cannot highlight text or right button stops working. How could I solve this?

  Read the article

• How can I get nvidia-96 installed?

  - by Bob

  I'm at my wits end here. This is my last effort before I go back to Windows. I need to get nvidia-96 proprietary driver installed. Synaptic won't install it because it says it has dependencies. I installed every single dependency it listed except for "xorg-video-abi-10" which does not show up as an item that can be installed. I have no idea what to do. Using 11.10 with a NVIDIA Geforce 3 GPU. Anyone know how to get this dang driver installed? @fossfreedom: the opensource driver is extremely slow. So slow that the OS is unusable—words appear seconds after I type them—programs take forever to perform actions. Also it is causing my monitor to turn on and off for no reason. @yossile: synaptic shows that I have xserver-xorg-core installed. And xserver-xorg-core-udeb does not show up as something that can be installed. @papseddy: when I try to install the downloaded nvidia driver it says it won't work until I disable Nouveau kernel driver. I have tried everything to get this dang Nouveau kernel driver disabled. Nothing has been successful.

  Read the article

• Compiling custom kernel 3.7.x lowlatency on Ubuntu 12.04

  - by FlabbergastedPickle

  All, I have a peculiar problem with trying to compile a lowlatency flavor of the latest 3.7 kernel. I retrieved the prepatched source from the launchpad using bzr, compiled it using the usual make-kpkg using the current config file plus default options for the rest, installed the kernel and booted into it. Everything works except for the fglrx and wl drivers that I had to install in the original 12.04 lowlatency kernel. So, I tried recompiling these and succeeded with both of them (no errors were reported)--wl driver required a minor adjustment to system.h include while latest fglrx 12.11 beta11 (released yesterday, Dec. 3rd, 2012) compiled without the hitch. Yet, when I try to modprobe either module (both having in common the fact that they were built after the kernel, fglrx as a deb, and wl via the usual make/make install), I get "FATAL: no MODULENAME module found" (MODULENAME being either wl or fglrx). The graphic driver watermark shows 3D crossed out and "for testing purposes" (or "unsupported hardware," can't remember), and no fglrx or wl is loaded. More mysteriously, dmesg shows no attempt on kernel's behalf to load the said drivers, even though they are clearly in the right /lib/modules/KERNEL_VERSION folder. How is this possible? Has something fundamentally changed in 3.7 kernel that would prevent modprobing of these? I know that there is driver signing option that was merged recently but as far as I could tell the kernel config file generated by the build process had that disabled. OTOH, while building wl driver, I did get a warning that the driver was not signed... Then again, even if the kernel disallowed loading of those modules, shouldn't dmesg reflect that? Any thoughts on this one are most appreciated.

  Read the article

• How to integrate a PHP CMS with paypal so that only users who completed a payment can register and authenticate?

  - by ibiza

  I am currently using a PHP CMS - cmsmadesimple - in order to create a website where services will be sold. I intend to use Paypal 'Buy Now' buttons in order to offer a few packages that will be renewable every 1-month or every 3-months and that grant access to the secure content of the website for a given period of time. Everything is going well so far but I am somewhat at loss for the user registration process as I have a few constraints I would like to use and it would be nice to automate the process if possible. Here are the constraints : User should be able to register to my website and choose a password himself Only users that paid should be able to register Access permissions should be disabled automatically after the service period if the package is not renewed And here is the process which I am thinking of : User clicks 'buy' on my website User is redirected on Paypal and completes the payment The paypal email used to pay should be returned to my server and somehow stored If it is a new email, user needs to register to my website (else if it is a returning customer, the deactivation flag for payment stopped should be removed to give back access) If a user does not renew his subscription, there should be a deactivation flag automatically set to the email used in order to lock access until next payment. Ideally, no human intervention is needed. What is the best way to implement all this? I am a bit at loss. I found this article that explained a few things and even has a nice code snippet, except that I'm not sure where to plug it. Thanks all

  Read the article

• wireless blocked after installing ubuntu 12.04

  - by Cornelia Frank

  I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Dual Monitor 'How To' for 12.04

  - by Kim Prince

  I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >