Search Results

Search found 8902 results on 357 pages for 'hardware virtualization'.

Page 101/357 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • Create Virtual Image of Laptop before Formatting

    - by Simon Mark Smith
    I have a 3 year old laptop running Windows XP that I used for business. Although I have not used the laptop in over a year, I now want to re-commission it with Windows 7 and a fresh install. Before I do the fresh install I want to create a Virtual Image of the laptop that I can keep and potentially run on my desktop machine should I ever need to access any of the old files/projects that it contains currently. I know that most people will say just copy the files over to your desktop, but my concern is the configuration of the laptop. I used to use it for development and it has older versions of Visual Studio, SQL Server, Active X controls etc, etc than I currently use so I really want to preserve the environment not just the files. So really I am asking what is the best tool-set/method to achieve this? I understand there are free VM tools available but I have never done this before and would appreciate any help.

    Read the article

  • trying to figure out how to bridge two virtual networks together and in turn bridge that to the internet for a virtual inline IDS/IPS system

    - by Tony robinson
    I'm trying to figure out how to bridge two vmware (server or workstation, workstation) or virtualbox networks together with a linux IDS/IPS system transparently inline between both the virtual networks. How do I accomplish this? I understand how to bridge to virtual networks together, but how to I make the linux virtual machine sit between them and force traffic to go across the transparent bridge? I would like to have something along the lines of: vmnet a various vms host-only network ---- inline linux box vmnet a boxes forced to go through here to get to the internet --- vmnet b network with internet access configured as either NAT or bridged -- internet I know that basically the linux box needs two virtual nics, one on vmnet a and vmnet b, but other than that, I don't know how to force all the traffic to go across the "transparent" bridging linux box on its way to the internet. Do vmnet a and b have to be the same ip network with the same default route? does vmnet a not have a default route and vmnet b have a default route? I've read in vmware forums that on the linux host you need to change permissions on the vmnet files for promiscuous mode? is this true? how do you configure this scenario on a windows box?

    Read the article

  • How is memory allocated in ESXi server?

    - by Samselvaprabu
    We have an ESXi 4.1 server with 48 GB RAM. For each VM, we are allocating 4GB of memory. Since the server will have 13 virtual machines, my manager thinks this is wrong. I am going to explain to them that ESXi will actually manage memory itself, but they asked me how much memory I allocated for the ESXi server itself. I did not allocate any (I have not even heard of an option for allocating memory for the ESXi server itself). How is memory allocated for ESXi server? How does it over-allocate/distribute RAM among virtual machines without issue?

    Read the article

  • virtual machines and cryptography

    - by Unknown
    I suspect I'm a bit offtopic with the site mission, but it seems me more fitting for the question than stackoverflow i'm in preparing to create a vm with sensible data (personal use, it will be a web+mail+... appliance of sorts), i'd like to protect the data even with cryptography; the final choice have to be cross-platform for the host basically, I have to choose between guest system-level cryptography (say, dm-crypt or similar) or host level cryptography with truecrypt. do you think that the "truecrypt-volume contained virtualized disks" approach will hit the i/o performance of the vm badly (and therefore dm-crypt like approaches into the vm would be better), or is it doable? I'd like to protect all the guest data, not only my personal data, to be able to suspend the vm freely without worrying for the swap partition, etc

    Read the article

  • How to extend a Linux PV partition online after virtual disk growth

    - by Yves Martin
    VMware allows to extend the size of a virtual disk online - when the VM is running. The next expected steps for Linux system are: extend the partition: delete and create a larger one with fdisk extend the PV size with pvresize use free extents for lvresize operations and then resize2fs for file system But I am stuck on the first step: fdisk and sfdisk still display the old size for the disk. My disk is a SCSI virtual disk connected thanks to the virtual LSI Logic controller. How to refresh the virtual disk size and partition table information available in Linux kernel without reboot ? As far as I know all that steps are possible for a running Windows, without reboot and even without any user actions thanks to VMWare tools. On Linux, I expects to do all steps online too and I already know steps 2, 3 and 4 work online. But the first one - change partition size declared in the partition table (still) seems to require a reboot. Update: My system is a Debian Lenny with kernel 2.6.26 and the disk I have extended is the main disk with a large PV containing the "root" LV for "/".

    Read the article

  • Fusion 3.1 and Parallels 6 for Win7 x64

    - by Ronnie
    I read in a recent article that Parallels Desktop 6 is faster almost everywhere than VMware Fusion. I was originally using Parallels 4 before passing to VMware due to the frequent Parallels crashes. As now I am using a lot Fusion on my Macbook on a big Win7 x64 virtualized development machine that I find too slow I am wondering if the announced speed up of Parallels V6 is justified to come back to it. As a test I converted my Fusion 3.1 to a trial of Parallels Desktop 6 and my Windows Experience Index passed from 4.7 of Fusion to 4.5 on Parallels 6 so apparently the virtualized machine is not seeing that speed benefit. Is there any optimization to set up on Parallels to increase the WEI or should I stay with Fusion (and in this case this kind of articles is just marketing stuff)?

    Read the article

  • How to best convert a fully encrypted drive into a Virtual Machine?

    - by SiegeX
    I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

    Read the article

  • non-GUI connection to local Hyper-V VM without network

    - by sandro
    I have a virtual machine on Hyper-V manager (Windows 2008 R2) without a network configured on the VM. From a powershell script running on the host Windows server, I would like to query into the OS of that local VM for certain information (i.e. if a given process has finished completion). I am using codeplex's pshyperv module (https://pshyperv.codeplex.com/) to interact with Hyper-V manager, but the only cmdlet to connect to the vm is 'New-VMConnectSession', which launches a 'vmconnect.exe' connection to the VM. Since vmconnect.exe is essentially RDP, this is not very script-friendly. From within a host's powershell script, is there any way to send a command to a local virtual machine's OS and receive output, if no network is configured on the VM? (I believe Vmware's 'vmrun' utility has this capability) Another way to ask this question: Does Hyper-V have a non-GUI-based form of vmconnect.exe? (PS. Not sure if this was more stackoverflow or serverfault)

    Read the article

  • KVM error with device pass through

    - by javano
    I am running the following command booting a Debian live CD passing a host PCI device to the guest as a test and KVM errors out; kvm -m 512 -boot c -net none -hda /media/AA502592502565F3/debian.iso -device pci-assign,host=07:00.0 PCI region 1 at address 0xf7920000 has size 0x80, which is not a multiple of 4K. You might experience some performance hit due to that. No IOMMU found. Unable to assign device "(null)" kvm: -device pci-assign,host=07:00.0: Device 'pci-assign' could not be initialized lspci | grep 07 07:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) I shoved an old spare NIC into my motherboard to test PCI pass through. I have searched the Internet with Goolge and found that errors relating to "No IOMMU found" often mean the PCI device is not supported by KVM. Does KVM have to support the device being "passed-through"? I though the point was to pass the device through and let the guest worry about it? Ultimately I want to pass-through a PCI random number generator, is this not going to be possible with KVM? Thank you.

    Read the article

  • Issue with multiple bridging for KVM hosts

    - by Henry-Nicolas Tourneur
    I'm using KVM and libvirt on my host (Debian lenny) + 2 bridges per guest (one for mgmt, one for public traffic). That setup isn't stable at all, sometimes I can do pings to a management ip, sometimes not. I don't know if my bridging paramateres are correct, could you check ? or if there is anything wrong ... Please also note that interface on guest doesn't flap and that I got not logs on my host. Of course forwarding is enabled. iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.128 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.128 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.240 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.240

    Read the article

  • How to detect when a user copies files from a server over the network?

    - by Mr. Graves
    I have a few virtual servers + desktops that are used for shared development with remote users, including some consultants. Each user has an account with access to most aspects of the server. I don't want to prevent people from being productive, or track passwords or read emails, but I do want to know when and what files they copy from the virtual server or what they upload from the server to a remote site, and what if any applications they install. This will help make sure my IP is protected, that no one is installing tools they shouldn't, and that things are licensed appropriately. What is the simplest way to do this? In order of importance I would say detecting file transfers off the machine to be most critical. Thanks

    Read the article

  • How to test KVM guest CPU maximum allocation limit?

    - by Ace
    Running Ubuntu 13.04 Host and vm Guest. Using virtio for hdd, nic. Max-allocaion CPU cores is 6, minimum is 2. Ive made a vm with virt-manager just to play with, and to test out kvm. Alright, I have a decent understand how the memory balloon driver works, but I still dont know how to test if the guest OS can utilize the max setting for cpu cores. From what i gather, the host will start one thread of qemu for each core allocated per vm. When i run htop inside the guest, it only shows two cores. (also here is the output of cat /proc/cpuinfo: https://gist.github.com/anonymous/93a361545130923537da ) How can I "force" the guest to allocate the other 4 cores so that it can show 6 cores in htop? Is there a way to do this?

    Read the article

  • Virtual Windows 2008 Server Activation with ESX

    - by Logman
    I had a decommissioned server (Dell PE2950) that we could still use, it had OEM Windows 2003 Std on it but wanted to use it as a new host with VMware ESX5 to put a couple legacy severs on it. I wiped it clean and maxed out the memory. But when I added the memory I noticed the product key sticker was a "WindowsServer08 Std 1-4cpu" product key, and it also had a Virtual Key. Not sure why it had Win2003 and not Win2008 from the start, but I would like to use that license if I can. The virtual host would stay on the same physical server, so there shouldn't be a problem with licensing... but I do not want to use Hyper-V unless I can not help it. I have installed ESX5 on the server, but I cannot get the Windows 2008 server to activate. The product key is hard to read, and I have checked the key quite a few times. But my question is... Is it because Hyper-V was not installed on the host? But I thought you could use the product key alone on a virtual host? Maybe because I am not using a Dell Windows 2008 disk but iso from MS directly via the Volumne Licensing site? EDIT: well, Im pretty sure I got the product key correct. If its not the product key, could the activation problem be because Im not using hyper-v or maybe the correct install dvd? EDIT2: maybe because I added 28GB of memory? Originally 4GB...

    Read the article

  • Is there a way to exclude a specific drive vdi from "snapshots" in VirtualBox?

    - by Graza
    ...or is there another space-efficient way of dealing with the page/swap file of the Guest O/S? I've realised that its quite possible/likely that one of the things which "bloats" the snapshot/diff vdi's when a snapshot is taken is the guest operating system's pagefile. For example, say I have a 2Gb swap-file in a Windows guest OS, and over the course of a few weeks the usage of the swap file has gone over 1Gb a couple of times. When I next create a snapshot, it seems likely that I'd be almost guaranteed around 1Gb of space taken up in the new differencing disk just because of changes in the swap file. Obviously (provided I never did "live" snapshots on running or paused machines, and only ever did them when the machine was shut down), I would not need any of the information in the swap file to be saved. So this would simply be a waste of 1Gb. I'm wondering if there's a way to attach a vdi to a VM and flag it as "exclude from snapshots" - which would mean I could put the swap file on a different vdi which would never be included in a snapshot. Or if anyone has any other suggestions. Or an explanation about why it might not be an issue. I could obviously delete and recreate a swap drive vdi every time I did a snapshot to achieve the same effect, but this is a little more effort than simply clicking "create snapshot"....

    Read the article

  • Multi-word dma 2

    - by Streki
    Hi, after installation of XP MODE I have in device manager in IDE ATA/ATAPI controler on my SSD disk Multi-word dma 2 mode/same mode like XP mode BIOS/. I using AHCI mode in bios and w7. Its any choice to get back Ultra DMA 6 mode? Thanks for help.

    Read the article

  • OpenVSwitch and Virtualbox configuration

    - by Newbie
    I am trying to setup a lab network with OpenVSwitch (Virtual L3 Switch). I want to connect my 3 Virtualbox guest machines (running Debian 6) using OpenVSwitch. But, confused as what should I do first and how should I do this. I mean should I install OpenVSwitch on my VM or on my host machine? If I install on my host machine, then should I make to connect to my VMs. OR If I install OpenVSwitch on one of my VM, then how to connect the rest of the VMs to virtual switch. I know, there is option to connect internal networks in virtualbox, but I a want L3 switch to interconnect my VLANs. Can someone guide me here. Please & Thank you.

    Read the article

  • How to keep time on resumed KVM guest with libvirt?

    - by Hristo Hristov
    On my host I am using libvirt and a KVM guest. When the host is shutting down, libvirt suspends the guest. When the host is starting up, libvirt resumes the guest. The problem is, if the guest is suspended and resumed after 24 hours for example, then the guest time is 24 hours in the past. I thought that maybe the problem is with the clocksource, but it is set to "kvm-clock" already. $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource kvm-clock tsc hpet acpi_pm $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock

    Read the article

  • How do I prevent libvirt from adding iptables rules for guest NAT networks?

    - by Jack Douglas
    Similar to this old request on BugZilla for Fedora 8, I'm hoping something has changed since then or someone knows another way. I want to manage the iptables rules by hand—the one-size-fits-all automatic rules don't suit me at all. These rules seem to be added and removed when a network is started and destroyed. Is there a way of either preventing these rules being added at all or hooking a script into the network start that restores the default rules afterwards. For now, I'm using a very crude method with cron, but I hope there is a better way: * * * * * root iptables-restore < /etc/sysconfig/iptables

    Read the article

  • need recommendation for running PHP/Zend based optimizer

    - by senorsmile
    Firstly, I must admit that I don't know much about setting up PHP beyond the basics. I have an Ubuntu 10.04 server system (hosted) running primarily as an FTP store for a commercial store software. The server that the commercial store is installed on is unfortunately not very reliable, and would like to move that to this Ubuntu 10.04 server. (We've already received permission from the store vendor to do this.) My problem is that they use Zend optimizer which is only compatible with PHP 5.2. I have tried a couple of "hacks" to downgrade PHP to 5.2, but it breaks so many other things that it doesn't seem worth it. My idea is to install some sort of container of Ubuntu 8.04 (like OpenVZ) on the server to house a native install of PHP 5.2 to meet the dependency of the store software. However, it appears that OpenVZ is no longer supported on Ubuntu. Is there another solution similar that I could run on a hosted server to installed a separate "container-like" 8.04 system?

    Read the article

  • scalable yet doable small-medium office network

    - by Jared
    Hello, I'm studying up with both Microsoft and Cisco literature and I must say, my head is starting to get clustered up (pun intended). I've made a quick network diagram of a theoretical company... Company1 owns Company 2 and Company 3, which are all under separate rooms and networks, but must be able to share a few resources such as files or printers. Given the amount of info out there and best practices, I thought about posting here to get suggestions and see what would the pro's do. I can read and read all day and implement on my own, but if I dont get some outside input, how will I know if I'm doing something wrong, right? anyway, please take a look and see if this is an over-complicated network or a lackluster design for a small-medium company of about 35 people and lets say they will be double that number by end of the year... :) Using win2k3, esxi, windows xp. FCS - forefront client security, ACS - access control system, SPCWK - spiceworks, XCH - Exchange Im not allowed to post an image yet, so here's the link ---- GLIFFY IMAGE Flame suit is on just in case people get mad at me for making an "abomination". I'd really want to get the general overview properly before I dive into the more complicated things

    Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >