Search Results

Search found 35538 results on 1422 pages for 'access 2007'.

Page 1014/1422 | < Previous Page | 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021  | Next Page >

• Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

  - by Kristin

  I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

  Read the article

• Cant make my site available to the internet

  - by user1683645

  Hi I'm using ubuntu as server OS for my webhosting but I'm having problem redirecting my domainname to my server Here are my /etc/hosts file and /etc/apache2/sites-available/mysite file. hosts file: 127.0.0.1 www.lowkey.se The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters sites-available/file: ServerAdmin webmaster@localhost ServerName www.lowkey.se DocumentRoot /var/www/doost/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/doost/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined And a screenshot from my domain name provider: http://imgur.com/VyqBR the site has been enabled in ubuntu, I've restarted apache2 and the folder /var/www/doost/ is there. What am i doing wrong?

  Read the article

• Making HTML5 videos stored on AWS S3 **difficult** to download (because I cant make it impossible)

  - by Jimmery

  I am building a website that hosts video's stored on AWS's S3 service. The videos are played thru a HTML5 player we have built. Ive just been asked to make sure "nobody can steal our video's". Now I know that if you really don't want something stolen, don't put it up on the internet. However I just need to secure these videos as good as possible, the videos need to at the very least resist someone going thru the source code and trying to download them manually. One option available to me is to completely rebuild the video player in flash. This is not ideal, for several reasons, notably because I would also then have to build an App for mobile devices to be able to view this site. So I am looking for other options. I have heard about using a token to make the file available only during certain times. I have heard of using a separate file to serve the videos that sits between the HTML5 page and the video file. I am also having a look at IAM, the Secure AWS Access Control, in the hopes AWS can solve this problem for me. Can anyone here recommend any of these options? Or perhaps suggest other options available to me? Any help would be greatly appreciated.

  Read the article

• How can I activate a Panel-icon via a script (or get its screen co-ordinates; to click it)?

  - by fred.bear

  This question is in the context of Lucid 10.04 desktop (ie. no Unity). I do most screen navigation via the keyboard (not the mouse), so I'm looking for a script solution to re-activating an app which has been "minimized" to the Panel's Notification Area. I'll use Skype as an example. wmctrl allows me enough access to normally-minimized windows, but when Skype is "minimized" to the Notification Area, it simply goes "off the radar" as far as wmctrl is concerned. Bearing in mind that icon positions in the Notification Area can vary, is there some way to determine the screen co-ordinates of Skype's Panel icon, so I can "click" it using xdotool (or a similar utility)? ...or maybe there is a more direct way to activate the "dormant" Skype? ... (and I don't mean the mouse ;) Here is the script, so far. Hopefully it will make clear what I'm trying to do: #!/bin/bash procname="skype-wrapper" windmask="Skype™" if [[ $(pgrep -x -n -c "$procname") == 1 ]] ; then wintitle="$(wmctrl -l |grep "$windmask" |head -n 1 |sed -n "s/^.\+${HOSTNAME} \(.*\)/\1/p")" if [ "$wintitle" = "" ] ; then echo "Click on Skype's Panel-icon to show the main window" ############################################################### # How can I find the screen co-ordinates of Skype's Panel Icon ############################################################### else # Skype is running, and has (at least) one visible window which matches $windmask. Activate it. wmctrl -a "$wintitle" fi else # The process is not currently running. Start it. ("$procname" &) fi

  Read the article

• JCP 2.9 and Transparency Call for Spec Leads 9 November

  - by heathervc

  JCP Spec Leads are invited to participate in an online meeting/call this Friday, 9 November, to hear a talk about the the 2.9 version of the Java Community Process (effective date of 13 November) and discuss the changes with representatives of the Program Management Office.  This call will be recorded and published with materials for those not able to attend.  Details of the call are included below.JCP 2.9 is presented in two documents:The JCP 2.9 document:http://www.jcp.org/en/procedures/jcp2and the EC Standing Rules document:http://www.jcp.org/en/procedures/ec_standing_rulesIn addition, we will be reviewing ways to collect community feedback on the transparency requirements for JCP 2.7 and above JSRs (JCP 2.8, JCP 2.9), detailed as part of the Spec Lead Guide.Call details:Topic: JCP 2.9 and Transparency Date: Friday, November 9, 2012 Time: 9:00 am, Pacific Standard Time (San Francisco, GMT-08:00) Meeting Number: 800 623 574 Meeting Password: 5282 ------------------------------------------------------- To start or join the online meeting ------------------------------------------------------- Go to https://jcp.webex.com/jcp/j.php?ED=188925347&UID=491098062&PW=NMDZiYTQzZmE1&RT=MiM0 ------------------------------------------------------- Audio conference information ------------------------------------------------------- Toll-Free Dial-In Number:     866 682-4770 International (Toll) Dial-In Number:     408 774-4073 Conference code 9454597 Security code 1020 Outside the US: global access numbers   https://www.intercallonline.com/portlets/scheduling/viewNumbers/listNumbersByCode.do?confCode=6279803

  Read the article

• Can't boot to Windows 7 after installing Ubuntu 11.10

  - by les02jen17

  Here's what happened: I have 2 HDDs. 1st HDD is partitioned like this: C - Windows 7 D* - Empty drive where I installed Ubuntu E - Personal Files F - Personal Files 2nd HDD is partitioned like this: G - Personal Files *the D partition is originally part of the C partition. I resized it (using Easus Partition Master in Windows) and defragged it prior to installing Ubuntu. I installed Ubuntu by booting to the Ubuntu Secure Remix CD, and chose the D partition to install Ubuntu. I did not create a swap drive, and I mounted the / to the D partition. I didnt know where to mount the others, so I just thought by mounting the / to D, it would be okay. After the long installation, upon rebooting, I can't access Windows AND Ubuntu. I get an infinite bootloop and eventually the choices to boot to Safe Modes, Last Known Good Configuration and Start Windows normally. After failing in all of them, I placed the CD back and ran the Boot Repair. I chose the MBR 1st, it didn't work. I then chose the GRUB 2nd and now I was able to boot to the Ubuntu I installed, but not to my Windows 7! I'm using my newly installed Ubuntu while writing this. I hope you can help me. I did the best I could! Here's the link to the boot repair log: http://paste.ubuntu.com/919354/ Thanks in advance!

  Read the article

• How to handle notifications to several partial views of the same model?

  - by Seki

  I am working on refactoring an old simulation of a Turing machine. The application uses a class that contains the state and the logic of program execution, and several panels to display the tape representation and show the state, messages, and the GUI controls (start, stop, program listing, ...). I would like to refactor it using the MVC architecture that was not used originaly: the Frame is the only way to get access to the different panels and there is also a strong coupling between the "engine" class and the GUI updates in the way of frame.displayPanel.state.setText("halted"); or frame.outputPanel.messages.append("some thing"); It looks to me that I should put the state related code into an observable model class and make the different panels observers. My problem is that the java Observable class only provides a global notification to the Observers, while I would prefer not to refresh every Observers everytime, but only when the part that specificaly observe has changed. I am thinking of implementing myself several vectors of listeners (for the state / position, for the output messages, ...) but I feel like reinventing the wheel. I though also about adding some flags that the observers could check like isNewMessageAvailable(), hasTapeMoved(), etc but it sounds also approximative design. BTW, is it ok to keep the fetch / execute loop into the model or should I move it in another place? We can think in a theorical ideal way as I am completely revamping this small application.

  Read the article

• WINAPI window management question

  - by gekod

  I'm learning to develop windows applications using WINAPI and plain C. Now I got a bit confused with all those handles and would like to ask if you guys could teach me some good practices to structure and handle controls and windows. Here's where I get confused: Using the IDs declared in the resources for each object, we can get their handles using GetDlgItem(). Now what if we don't know their parent, which is needed by this function. One example: We have the main window created at launch. Then we register two new window classes and create a window for each new class and we create a message function for each too. Now if inside one of the children windows I create a button and inside the other child window I create a text label. Now when we click the button inside of child window A the label in child window B shall be modified to whatever. The WM_COMMAND for the button is interpreted inside the message loop for child window A. Now what would be the best and more elegant way to access the text label inside the child window B? I am in the process of learning the WINAPI and just want to learn it right from the start instead of producing Hacked code that someday becomes unreadable and to later have to adapt to a new way of programing.

  Read the article

• Creating my own PHP framework

  - by onlineapplab.com

  Disclaimer: I don't want to start any flame war so there will not be no name of any framework mentioned. I've been using quite many from the existing PHP frameworks and my experience in each case was similar: everything is nice a the beginning but in the moment you require something non standard you get into lot of problems to fix otherwise simple issues. In case of frameworks following the MVC design pattern there are some issues with the implementation of each layer for example there is a lot of codding used for model and data access with using ORM and presentation is not much more than pure phtml. Some frameworks use their own wrappers for existing PHP functionality and in some cases severely limiting original functionality. Depending on framework you can have additional problems like lack of documentation, slow or non existent development cycle and last but not least speed. While ago I made my own framework which while doing it's job and being used for few different applications after couple of years more of experience with PHP doesn't seem to be perfect piece of codding. I could write my own framework and use additional experience I've gathered during these years to make it better on the other hand I'm aware that there is quite many better programmers working on creating/upgrading existing frameworks. So does it make at all nay sense to write my own PHP framework if there is so many possibilities to choose from?

  Read the article

• What is the correct way to code incoming links for SEO?

  - by DC01

  Our site is giving out 'badges' to our authors. They can post these on their personal blogs and they will serve as incoming links to our site. We want to give out the best possible code for SEO without doing anything that would get us flagged. I would like to know what you're thoughts are on the following snippet of code and if anyone has any DEFINITE advice on dos and donts with it. Also, let me know if any of it is redundant or not worth it for SEO purposes. I've kept the css inline since some of the writers would not have access to add link to external CSS. I've changed the real values, but title, alt etc would be descriptive keywords similar to our page titles etc (no overloading keywords or any of that) <div id="writer" style="width:100px;height:50px;> <h1><strong style="float:left;text-indent:-9999px;overflow:hidden;margin:0;padding:0;">articles on x,y,z</strong> <a href="http://www.site.com/link-to-author" title="site description"> <img style="border:none" src="http://www.site.com/images/badge.png" alt="description of articles" title="View my published work on site.com"/> </a> </h1></div>

  Read the article

• Overlapping text on top menu in Unity 12.04

  - by mercury

  So I'm new to Linux but am basically blown away by Ubuntu 12.04 and could definitely see this becoming my main desktop over time One small annoyance for me is a tendency for the global menu on the top bar to partially over-write the text description of the active window in the top panel. e.g. I focus on the "Ubuntu Software Centre" window which writes out that label in the leftmost corner of the top menu bar. If I then move the cursor up to the top menu bar to access the "file menu", this will partially overwrite the window name leaving just "Ubuntu" visible. This is a little slice of ugliness I don't want to see every day! Much easier on the eye for me would be to display the active window name at the centre of the top panel, using some of that free space and then have the global menu stay where it is, just to the right of the app launcher. I've found a solution to disable the global menu but I would prefer to keep it and instead move (or disable) the active window name in the top panel. Any way to do this?

  Read the article

• Hosting woes

  Unfortunately quite a few people have noticed our recent hosting problems, but if you are reading this they should all be over, so please accept our apologies. Our former web host decided migrate to a new platform, it had all sorts or great features, but on reflection hosting wasn’t one of them. We knew it was coming, and had even been proactive and requested several dates on their migration control panel so I could be around to check it afterwards. The dates came and went without anything happening, so we sat back and carried on on for a couple of months thinking they’d get back to us when they were ready. Then out of the blue I get an email saying it has happened! Now this is what I call timing, I had client work to complete, a 50 minute presentation to write and there was a little conference called SQLBits that I help organise at the end of the week, and then our hosting provider decides to migrate our sites. Unfortunately they only migrated parts of the sites, they forgot things like the database for SQLDTS. The database eventually appeared, but the data didn’t. Then the data pitched up but without the stored procedures. I was even asked if I could perform a backup and send it to them, as they were getting timeout errors. Never mind the issues of performing a native backup on a hosted server, whilst I could have done something, the question actually left me speechless. So you cannot access your own SQL server and you expect me to be able to help? This site was there, but hadn’t been set as an IIS application so all path references were wrong which meant no CSS and all the internal navigation and links were wrong. The new improved hosting platform Control Panel didn't appear to like setting applications. It said it would, you’d have to wait 2 hours of course, then just decided not to bother after all. So needless to say after a very successful SQLBits I focused my attention on finding a new web host, and here we are again. Sorry it took so long.

  Read the article

• Recommended design pattern for object with optional and modifiable attributtes? [on hold]

  - by Ikuzen

  I've been using the Builder pattern to create objects with a large number of attributes, where most of them are optional. But up until now, I've defined them as final, as recommended by Joshua Block and other authors, and haven't needed to change their values. I am wondering what should I do though if I need a class with a substantial number of optional but non-final (mutable) attributes? My Builder pattern code looks like this: public class Example { //All possible parameters (optional or not) private final int param1; private final int param2; //Builder class public static class Builder { private final int param1; //Required parameters private int param2 = 0; //Optional parameters - initialized to default //Builder constructor public Builder (int param1) { this.param1 = param1; } //Setter-like methods for optional parameters public Builder param2(int value) { param2 = value; return this; } //build() method public Example build() { return new Example(this); } } //Private constructor private Example(Builder builder) { param1 = builder.param1; param2 = builder.param2; } } Can I just remove the final keyword from the declaration to be able to access the attributes externally (through normal setters, for example)? Or is there a creational pattern that allows optional but non-final attributes that would be better suited in this case?

  Read the article

• How do I get my internal HDD to mount at startup?

  - by el_gallo_azul

  It's either not intuitive or not working in Ubuntu 14.04. I want to mount my internal HDD at at startup (I boot from an SSD). I attempt to set this, following this procedure: Open Disks utility Select the disk Below the disk's Volumes, click on the More actions button Select Edit Mount Options... Select Automatic Mount Options "Off" Under Mount Options, ensure that Mount at startup is selected Click OK Enter password into Authenticate dialog box Restart but this procedure doesn't work. Upon rebooting, and after Grub attempts to start Ubuntu, I receive the error message "An error occurred while mounting /mnt/4f721fc0-8072-453f-b48f-ca686bd89549. Press S to skip mounting or M for manual recovery". That identifier "4f721fc0-8072-453f-b48f-ca686bd89549" was automatically assigned by Ubuntu. I press S and the boot process continues OK. If I try to mount the disk immediately after booting, I receive the error message "Unable to access "Storage"" (I named the volume Storage). So then I start the Disks utility and set it to Automatic Mount Options "On" and reboot. To me, it seems like this should work, but it doesn't. Here are a number of photos of the process (Alt+PrtScn doesn't work after selecting More actions).

  Read the article

• How should VertexBuffers be used with Multiple Monitors in DirectX 9

  - by Joshua C

  I am currently using DirectX 9 on a machine with two GPUs and three monitors. I am currently trying to draw a triangle on each monitor using vertexbuffers; A directx helloworld with multiple monitors if you will. I am familiar with some DirectX coding, but new to multiple monitor DirectX coding. I may be going about this the wrong way, so please do correct me if I'm doing something wrong. I have created a Direct3D Device for each enumerated adapter sharing the same Form handle. This allows me to successfully use all three monitors in full-screen mode. For Each Adapter In Direct3D.Adapters Dim PresentParameters As New PresentParameters 'Setup PresentParameters PresentParameters.Windowed = False PresentParameters.DeviceWindowHandle = MainForm.Handle Dim Device as New Device(Direct3D, Adapter.Adapter, DeviceType.Hardware, PresentParameters.DeviceWindowHandle, CreateFlags.HardwareVertexProcessing, PresentParameters) Device.SetRenderState(RenderState.Lighting, False) Devices.Add(Device) Next I can also draw text to each device successfully using a different Font for each Device. When I render a triangle using a different VertexBuffer for each Device, only two monitors display the triangle. One of the two monitors on the same GPU, and the monitor on it's own GPU display properly. VertexBuffer = New VertexBuffer(Device, 4 * Marshal.SizeOf(GetType(ColoredVertex)), Usage.WriteOnly, VertexFormat.None, Pool.Managed) Dim Verts = VertexBuffer.Lock(0, 0, LockFlags.None) Verts.WriteRange({ New ColoredVertex(-.5, -.5, 1, ForeColor), New ColoredVertex(0, .5, 1, ForeColor), New ColoredVertex(.5, -.5, 1, ForeColor) }) VertexBuffer.Unlock() VertexDeclaration = New VertexDeclaration(Device, { New VertexElement(0, 0, DeclarationType.Float3, DeclarationMethod.Default, DeclarationUsage.Position, 0), New VertexElement(0, 12, DeclarationType.Color, DeclarationMethod.Default, DeclarationUsage.Color, 0), VertexElement.VertexDeclarationEnd }) Render Code: Device.SetStreamSource(0, VertexBuffer, 0, Marshal.SizeOf(GetType(ColoredVertex))) Device.VertexDeclaration = VertexDeclaration Device.DrawPrimitives(PrimitiveType.TriangleList, 0, 1) I have to assume the fact that they share the same physical card comes into play. Should I use multiple buffers on the same card, and if so, how? Or what is the way I should access the VertexBuffer across Devices? Another thought I had was the non working monitor acts like there are no lights. Is turning off lighting on each device on the same card causing issues somehow?

  Read the article

• Ubuntu Wireless not working on Lenovo t400

  - by VmaxBoss

  This problem started after upgrading to 12.04, an my system is 'up2date' Have tried most of the solution-proposals found on the net. lspci -nnk | grep -iA2 net 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlagn iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off sudo lshw -C network *-network description: Ethernet interface product: 82567LF Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:22:68:1a:c4:75 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.0.2-k2 duplex=full firmware=1.8-3 ip=192.168.2.154 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:29 memory:fc000000-fc01ffff memory:fc024000-fc024fff ioport:1820(size=32) *-network DISABLED description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:6c:2d:24 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:30 memory:f4300000-f4301fff Please help Br/VB

  Read the article

• Wireless problems with Broadcom BCM4313 with windows7 (duplicate)

  - by user292394

  I have wireless connection problem can't connect my wireless adress lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no lsmod Module Size Used by bnep 19624 2 rfcomm 69160 8 ip6t_REJECT 12939 1 xt_hl 12521 6 ip6t_rt 13537 3 nf_conntrack_ipv6 18894 8 nf_defrag_ipv6 34768 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17717 10 xt_limit 12711 13 xt_tcpudp 12884 18 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 8 nf_defrag_ipv4 12758 1 nf_conntrack_ipv4 xt_conntrack 12760 16 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12770 0 nf_nat 21798 1 nf_nat_ftp nf_conntrack_ftp 18638 1 nf_nat_ftp nf_conntrack 96976 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 ip_tables 27239 1 iptable_filter vx_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT uvcvideo 80885 0 videobuf2_vmalloc 13216 1 uvcvideo videobuf2_memops 13362 1 videobuf2_vmalloc snd_hda_codec_hdmi 46207 1 videobuf2_core 40664 1 uvcvideo videodev 134688 2 uvcvideo,videobuf2_core snd_hda_codec_conexant 57441 1 snd_hda_intel 52355 8 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 dm_multipath 22873 0 snd_seq_midi_event 14899 1 snd_seq_midi scsi_dh 14882 1 dm_multipath lib80211_crypt_tkip 17619 0 snd_rawmidi 30144 1 snd_seq_midi intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel joydev 17381 0 serio_raw 13462 0 snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi intel_ips 18664 0 wl 4207846 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi btusb 32412 0 bluetooth 395423 22 bnep,btusb,rfcomm snd_timer 29482 2 snd_pcm,snd_seq snd 69238 26 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi lib80211 14381 2 wl,lib80211_crypt_tkip toshiba_bluetooth 12852 0 cfg80211 484040 1 wl lpc_ich 21080 0 fglrx 8085343 190 soundcore 12680 1 snd toshiba_acpi 22901 0 sparse_keymap 13948 1 toshiba_acpi wmi 19177 1 toshiba_acpi amd_iommu_v2 19054 1 fglrx video 19476 0 mei_me 18627 0 mei 82276 1 mei_me mac_hid 13205 0 parport_pc 32701 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 52570 0 hid 106148 2 hid_generic,usbhid psmouse 102222 0 ahci 25819 3 libahci 32168 1 ahci atl1c 46086 0 dm_mirror 22135 0 dm_region_hash 20862 1 dm_mirror dm_log 18411 2 dm_region_hash,dm_mirror Can someone give any ideas on how I can fix my wireless

  Read the article

• Learn about the Exciting New WebCenter Content 11.1.1.8 Features by Attending the Advisor Webcast on November 21st!

  - by AlanBoucher

  Have you been looking for a place to store your content securely and in an organized fashion, while needing to access it while you are on the go? Well you can!  Learn about the new Mobile App for WebCenter Content 11.1.1.8 along with other exciting new features by attending the Advisor Webcast called WebCenter Content 11.1.1.8 Overview and Support Information. November 21, 2013 at 11 am ET, 10 am CT, 9 am MT, 8 am PT, 5:00 pm, Europe Time (Paris, GMT+01:00) This one-hour session is recommended for technical and functional users who have installed or will install WebCenter Content 11.1.1.8 or would just like more information on the latest release. TOPICS WILL INCLUDE: Overview of new features and enhancements Installation of the new Content UI Upgrading from older WebCenter Content versions Support issues including latest patches Roadmap of proposed additional features REGISTER NOW and mark your Calendar:1. Event address for attendees: https://oracleaw.webex.com/oracleaw/onstage/g.php?d=590991341&t=a2. Register for the meeting.Once the host approves your request, you will receive a confirmation email with instructions for joining the meeting.

  Read the article

• Quit job for another but current employer doesn't want to lose me. Would it be a bad idea to stay?

  - by Confused

  So I've handed in my notice at my current job as I've been offered a job at another company. However, my current employer doesn't want to lose me and they want to know what I want to stay. I mostly enjoy working there so I'd be open to negiotiation. The new job was an unexpected opportunity that presented itself. Such things I'd be looking for are: Better computers for developers Opportunity to work from home occasionally Improved internet access (e.g. able to download software, no keyword blocking) Chance to work on other technologies than my primary (we do have projects on other technologies) Pay increase (though this isn't my primary motivation) I found out that some of these were already in progress when I handed in my notice :( Is it ever a good idea to remain at a company after you've resigned? What if they meet all my conditions and alter my contract accordingly? Will I burn my bridges at the new company (I've already told them I'd accept their offer)? Update: Thanks for the answers. Quite a mixed bag which was interesting. Anyway, just so you know, I've chosen to stay at my current company. So far, it definately feels like the right decision. Guess I won't know for a few months whether is was though.

  Read the article

• Separate update and render

  - by NSAddict

  I'm programming a simple Snake in Java. I'm a complete newbie when it comes to Java and Game Developing, so please bear with me ;) Until now, I have been using a UI thread, as well as a update-thread. The update thread just set the position, set the GameObjects, and so on. I didn't think much of concurrency, but now I've come to a problem. I wanted to modify the ArrayList<GameObject>, but it throws a java.util.ConcurrentModificationException. With a little research I found out that this happens because the two threads are trying to access the variables at the same time. But I didn't really find a way to prevent this. I thought about copying the array and swapping them out when the rendering is finished, but I would have to deep-copy them, which isn't really the best solution in my opinion. It probably eats up more CPU resources than a single-threaded game. Are there any other ways to prevent this? Thanks a lot for your help!

  Read the article

• VPNs - The ins and outs of IPSec & VPNs in general [on hold]

  - by Magus

  I have to decided to mess around with VPNs on my home router, to access a couple of servers in the back room of my house, however, I went into this thinking happy thoughts and easy-peasy-lemon-squeezy... Now I feel like doing drugs, as if maybe that will help me understand the myriad of terms which come with this nifty little tool. Basically, I do understand WHAT a VPN is, but I have no idea how to set one up. I have a Cisco router ( will supply more info if needed ), and would prefer to use IPSec for this ordeal. I'd like to have the following terms explained ( and yes, I have used the famous Google to help, close but no cigar ) : "Local Secure Group", "Remote Secure Group", "Remote Secure Gateway", how different types of "Keys" work ( again, I know the basics ), and for the "Add VPN Config" screen on the connecting device: "Server, does it have to be an address, or just an IP?", "Account; is this the tunnel name?", I am going to assume 'Password' means the Key, "Group Name; or is THIS the tunnel name?", and "Secret; I halfish know what this is..." I would really appreciate any contribution made, no matter how small, even if it includes a redirect. I just want to learn. Thanks in advance! Magus

  Read the article

• Virtual Hosts Not Working (12.10)

  - by lolajl

  I'm trying to get virtual hosts up and running on my Ubuntu laptop that has 12.10 installed. I'm running Apache2, and I enabled the virtual hosting module. When I go to 12.0.0.1, I'm able to get the default page. When I go to example.local, I just get the search engine results, instead of the "hey, you're seeing this" page I set up in that directory (/var/www/example.local). I even made sure I have only one "NameVirtualHost *:80" variable active. Checking error.log, nothing obvious seems to jump out as being amiss. here's what I have in the respective files: example.local ServerName example.local ServerAdmin webmaster@localhost DocumentRoot /var/www/example.local <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/example.local> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined ports.conf NameVirtualHost *:80 Listen 80 hosts 127.0.0.1 localhost 127.0.1.1 KitaiGorod 127.0.0.1 example.local ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters

  Read the article

• Where do I read more about building an architecture like Google has? [on hold]

  - by user107148

  I want to develop a program that watches and traverses a rather big network for data. This data should then be available to search through with my program, maybe through a web interface or something. My intuitive thought at the moment is to build an architecture kind of like the one Google has. One "front-end" (the Google Search page) which is essentially a regular web application and one "back-end" (which in Google's case traverses the web). Now for the hard part: If I decide to make such a system, how should communication be done between these parts? One idea I had is to use some kind of database that both the back-end and front-end can access, but then comes the issues of concurrent writes and reads. Another issue with just using a database to communicate is that it makes it hard to "notify" the other part when something changes. Let's say that I want the "front-end" part to push changes to the UI when a change is noticed in the back-end. Then the back-end would have to have some way of notifying the front-end of this.

  Read the article

• How to use Twitter4j With JSF2 for Login? [on hold]

  - by subodh

  I am trying to do login with Twitter and using Twitter4j for that and wrote this code In JSF <h:commandButton id="twitterbutton" value="Sign up with Twitter" action="#{twitterLoginBean.redirectTwitterLogin}" immediate="true" styleClass="twitterbutton"/> In ManagedBean public String redirectTwitterLogin() throws ServletException, IOException, TwitterException { HttpServletRequest request = (HttpServletRequest) FacesContext .getCurrentInstance().getExternalContext().getRequest(); HttpServletResponse response = (HttpServletResponse) FacesContext .getCurrentInstance().getExternalContext().getResponse(); Twitter twitter = TwitterFactory.getSingleton(); twitter.setOAuthConsumer(apiKey, apiSecret); RequestToken requestToken = twitter.getOAuthRequestToken(); if (requestToken != null) { AccessToken accessToken = null; BufferedReader br = new BufferedReader(new InputStreamReader( System.in)); while (null == accessToken) { try { String pin = br.readLine(); accessToken = twitter .getOAuthAccessToken(requestToken, pin); } catch (TwitterException te) { System.out .println("Failed to get access token, caused by: " + te.getMessage()); System.out.println("Retry input PIN"); } } request.setAttribute(IS_AUTHENTICATED, true); if (accessToken != null) { LOGGER.debug("We have a valid oauth token! Make the facebook request"); doApiCall(twitter, request, response); return null; } } else { LOGGER.debug("We don't have auth code yet, fetching the Authorization URL..."); String authorizationUrl = requestToken.getAuthorizationURL(); LOGGER.debug("Redirecting to the Authorization URL: {}", authorizationUrl); request.setAttribute(IS_AUTHENTICATED, false); redirect(authorizationUrl, response); return null; } return null; } In above code i want first Login window of twitter will show and then again same method will call and after user will login i can show user information userId,Handel,location etc. Redirect private void redirect(String url, HttpServletResponse response) throws IOException { String urlWithSessionID = response.encodeRedirectURL(url); response.sendRedirect(urlWithSessionID); } But this code is not working Can anyone tell better Solution for this ?

  Read the article

• I am being paid very little(imo), how can I change this? [migrated]

  - by LagWagon

  I am a web developer with about 4 years of relevant work experience in my field. Recently, I went from making $30/hr working from home contracting for large companies to a full time job that only pays 40k/yr. The company I work for now is great, nice people, but a little behind the times. I joined on with very little experience in SQL development but they put me in charge of querying the DB and making reports right away, so I had to go in head first and pick up that skill right away. Which is great, I'm happy I learned more of that, and really make good time when doing SQL now. However, I'm now doing most of their advanced SQL stuff. The day I started, another employee who was running a MVC project based in Yii (which is the sole item that makes this company software) put in his two weeks. Two weeks later, I'm the only one who knows how to use, access, modify, or update this project. Its quite a large responsibility for an "entry level dev", no? I am doing highly advanced jQuery for them to modernize their forms, webpages, amongst other things, a skill that I would bet on few Entry levels being able to do as well as me. I may be wrong, but I feel that what I'm making now is not acceptable. We don't have reviews, ever, so I can't just wait for that.. so I was wondering.. do I sound justified in wanting to be paid more, and how can I make this happen?

  Read the article

< Previous Page | 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021  | Next Page >