Search Results

Search found 38458 results on 1539 pages for 'remote access'.

Page 1017/1539 | < Previous Page | 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024  | Next Page >

• How Can I Disable CRL Checks For A Windows 2008 App Using WinHTTP?

  - by Mike B

  I've got a Windows 2008 server with an app that uses WinHTTP for SSL sessions. The server is isolated from the internet but still tries to connect to CRL distribution points, which leads to some timeouts. Since the server has no access to the internet whatsoever, I'd like to disable CRL checks. I had a similar issue on a Windows 2003 server and resolved it by adjusting the following registry keys: HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Http/Parameters/SslBindiongInfo/0.0.0.0:443/DefaultSslCertCheckMode (DWORD=1) HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Rasman/PPP/EAP/13/NoRevocationCheck (DWORD = 1) HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Rasman/PPP/EAP/13/NoRootRevocationCheck (DWORD = 1) That doesn't seem to be working in 2008. I've also tried disabling the CRL check from IE under Tools Internet Options Advanced. Is there anything else I can try here?

  Read the article

• How to change HTTP_REFERER using perl?

  - by zuqqhi2

  I tried to change log format and change HTTP_REFERER using perl to change browser's referrer like below. [pattern1] Log Format : %{HTTP_REFERER}o perl : $ENV{'HTTP_REFERER'} = "http://www.google.com"; [pattern2] Log Format : %{X-RT-REF}o perl : addHeader('X-RT-REF' => "http://www.google.com"); [pattern3] Log Format : %{HTTP_REFERER}e perl : $ENV{'HTTP_REFERER'} = "http://www.google.com"; but they didn't work. How can I do it? If you have any idea please teach me. Note that I just want to do this as a countermeasure for illegal access in my intra tool.

  Read the article

• iptables blocking ssh communication

  - by Michal Sapsa

  I'm using this script for iptables: #!/bin/sh echo "1" > /proc/sys/net/ipv4/ip_forward iptables -F iptables -X iptables -F -t nat iptables -X -t nat iptables -F -t filter iptables -X -t filter iptables -t filter -P FORWARD DROP iptables -t filter -A FORWARD -s 192.168.0.0/255.255.0.0 -d 0/0 -j ACCEPT iptables -t filter -A FORWARD -s 0/0 -d 192.168.0.0/255.255.0.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.8.0.1/255.255.255.0 -j MASQUERADE iptables -A FORWARD -s 10.8.0.1/255.255.255.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -j MASQUERADE iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu iptables -t nat -A PREROUTING -i eth1 -p udp --dport 16161 -j DNAT --to 192.168.0.251:16161 iptables -t nat -A PREROUTING -i eth1 -p udp --sport 16161 -j DNAT --to 192.168.0.251:16161 #openvpn iptables -I INPUT -p tcp --dport 1194 -j ACCEPT iptables -I INPUT -p udp --dport 1194 -j ACCEPT I end up with some iptables rules that should work but don't work - probably because of me. # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *raw :PREROUTING ACCEPT [1657523:1357257330] :OUTPUT ACCEPT [36804:34834370] -A PREROUTING -p icmp -j TRACE -A PREROUTING -p tcp -j TRACE -A OUTPUT -p icmp -j TRACE -A OUTPUT -p tcp -j TRACE COMMIT # Completed on Mon May 26 13:15:43 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *nat :PREROUTING ACCEPT [5033:345623] :INPUT ACCEPT [154:34662] :OUTPUT ACCEPT [6:1968] :POSTROUTING ACCEPT [2:120] -A PREROUTING -i eth0 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A PREROUTING -i eth1 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A POSTROUTING -s 10.8.0.0/24 -j MASQUERADE -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE COMMIT # Completed on Mon May 26 13:15:44 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:44 2014 *filter :INPUT ACCEPT [548:69692] :FORWARD DROP [8:384] :OUTPUT ACCEPT [2120:1097479] -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1194 -j ACCEPT -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu -A FORWARD -s 192.168.0.0/16 -j ACCEPT -A FORWARD -d 192.168.0.0/16 -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -i eth0 -o eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 22 -j ACCEPT COMMIT TRACE at PREROUTEING AND OUTPUT are only for debuging this thing. When I ssh at public ip with port 16161 I don't get any message, only TimeOut so it looks like I don't get communication back to remote server. ETH0 is the world, ETH1 is LAN Any IPTABLES Masters willing to give a hand ? iptables -vL Chain INPUT (policy ACCEPT 20548 packets, 3198K bytes) pkts bytes target prot opt in out source destination 38822 7014K ACCEPT udp -- any any anywhere anywhere udp dpt:openvpn 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:openvpn Chain FORWARD (policy DROP 1129 packets, 64390 bytes) pkts bytes target prot opt in out source destination 214K 11M TCPMSS tcp -- any any anywhere anywhere tcpflags: SYN,RST/SYN TCPMSS clamp to PMTU 4565K 1090M ACCEPT all -- any any 192.168.0.0/16 anywhere 5916K 7315M ACCEPT all -- any any anywhere 192.168.0.0/16 0 0 ACCEPT all -- any any 10.8.0.0/24 anywhere 0 0 ACCEPT tcp -- any any anywhere 192.168.0.251 tcp dpt:16161 Chain OUTPUT (policy ACCEPT 59462 packets, 19M bytes) pkts bytes target prot opt in out source destination

  Read the article

• PXE Boot PCLinuxOS ISO

  - by DBNotCooper

  I'm in the process of trying to convert some computers at my local school to be diskless browser stations. We've identified PCLinuxOS as the OS we'd like to use due to it's easy interface for creating custom ISO images (we need WINE and some custom apps installed also, as well as FireFox). I've been having problems figuring out how to get an ISO to boot via PXE. In our network, I only have access to TFTP and HTTP, so I cannot use NFS. The machines all have enough memory (4 gigs) that they could use a ram drive to hold the ISO image, if that helps. Currently I've been looking at GPXE with GRUB/MEMDISK, but I don't know if that's the right solution, or even where a good resource is for setting it up. Searching the web has proved fruitless, as most of the information is either NFS-specific or out of date. The other students and I would appreciate any help! :)

  Read the article

• Apache Front End....Tomcat back end...SSL question

  - by Jared

  Hi Everyone, Question.... I have Apache setup as my webserver. Tomcat is hooked into Apache via mod_jk, so the user never interacts with Tomcat. I have set up SSL on the Apache Webser...I can hit it with https:// localhost When I try to access my application at ...https://localhost/app I get a directory not found error. Catch is when I go regular http... I can hit it fine... http:// localhost/app What do I have to edit for this connection to work? I have uncommented the AJP connector in server.xml I have added my virtual host to httpd.conf What am I missing? Thanks in advance. Jared

  Read the article

• Copying OS X account settings to new user account

  - by Donna Crain

  Hi I hope someone can help me... I accidentally renamed my own user name on my mac running OS X 10.4.11 and tried renaming back to what it was but now I have two accounts (the one I want to use which has all my preferences, applications, mail boxes, etc etc) is it possible to copy my settings from my original into this new user name? When I open my computer it defaults to this new account but everything is setting up from new and I just need to get access to all my work documents, mail settings etc. If there is anyone who could help out, I would be very grateful. Thank you in advance.

  Read the article

• Ubuntu Server UFW NAT Issues

  - by William Fleming

  *nat :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A ufw-before-input -i tun0 -j ACCEPT -A ufw-before-output -i tun0 -j ACCEPT -A ufw-before-forward -s 10.8.0.0/24 -j ACCEPT -A ufw-before-forward -d 10.8.0.0/24 -j ACCEPT This input into my before.rules file stops me being able to ping the outside world. Before its fine i can ping google.co.uk after cant get out. Is there something wrong in my syntax here or what is the issue...? Im just trying to NAT my VPN so i can get internet access. Any thoughts would be greatly appreciated. Thanks William

  Read the article

• Wireless is not currently enabled

  - by ikartik90

  I have a HP Pavilion TX2000 tablet PC with me with windows 7 OS running on it. I used to access the Internet using my D-Link DIR 615 wireless adapter on the tablet and it used to work quite fine until one day, when I hibernated my Windows 7, the wireless went off and the problem seems to persist even after my hard efforts to clear it. I checked if the router works fine, and yes it did as my iPod was still catching wireless signals on the other hand, when I checked mu device manager, I realized that I now had no wireless driver. I checked on HP's website for one, but ironically even they didn't have wireless drivers meant for my tablet for Windows 7. Please help me find a solution to this problem. Further queries will be entertained as frequently as possible. Thanks.

  Read the article

• Internet connection slower than network connection speed

  - by Mike Pateras

  I've got a computer connected to a wireless router on a different floor. When I look at the network connection, I'm told the signal strength is low, and that I've got a connection of about 26mbps (often higher). However, my internet connection on that machine is very slow. Speedtests show it at about 1-2mbps, and it really shows when loading pages and video. I have fiber optic internet access, and the machine that's connected to the router/modem via cable gets the 20mbps on speed tests, and is extremely fast in every day use. My question is, is the advertised 26mbps+ connection speed perhaps inaccurate, and that my wireless bandwidth is the likely bottleneck here? Or is the signal strength what's key here? And what might I do about this? Power cycling the router helped a bit, a speed test went as high as 6mbps after doing that.

  Read the article

• Strange problem with Exchange client connection

  - by Sam Cogan

  I've got a strange problem with an Exchange 2007 server running on SBS 2008. It's been working fine for users for the last 5 months, then 5 days ago they started getting a problem where Outlook would popup a window asking for credentials. If the user enters there credentials it pops up again and again, however if the user cancels the box it goes away and outlook continues to work fine. These clients all connect using Outlook Anywhere, and OWA access is also working fine. I had thought this message box may have been to do with other POP or IMAP accounts being configured in Outlook, but it's not the case. I have re-configured Outlook Anywhere on the server but to no avail. Using the RPC diagnostic tool in Outlook shows no problems. There are no errors showing in the event log. The server seems to be running fine, so to me this seems like either a client, or an RPC over HTTP issue, but I'm not getting anywhere finding the cause, any help is appreciated!

  Read the article

• Vim Stuck In Insert Mode

  - by Levi Hackwith

  I've been using Vim for several months now via my web host (they allow putty access). All of a sudden, the escape key has become unresponsive. I cannot exist insert or any other mode by simply hitting escape. I have to hit F1 which brings up the help in vim and kicks me into command mode. I'm most certain that my escape key on my keyboard is functioning fine since all of my windows shortcuts that use the escape key operate normally. I know this is a ridiculous question and I'm certain there's a lot more to look into regarding a solution. What I really need is a solid lead as to where to start looking. Things that might help: I'm using vim via putty I'm logging in using jailshell I'm not root

  Read the article

• IOMEGA 500GB hard disk data reccovery

  - by Vineeth

  Last year by November I bought an IOMEGA 500GB Prestige hard disk. Yesterday, unfortunately the hard disk fell down from my table. After that incident, when I connect my disk, Windows asks me to format the disk to use, but I didn't format it yet. Actually, on that hard disk I have about 320GB of data. I tried all my possible ways to access my disk. I tried using DOS. It shows "data error (Cyclic redundancy check)". I have a 3 year warranty. Will I be covered under warranty if I report this issue to IOMEGA? Can I get my data back?

  Read the article

• Can I pin a cmd/batch file to command prompt on the Windows 7 taskbar?

  - by eidylon

  Hey all, just wanted to ask quick if anyone knows how to do this. If not I'll post it on connect.microsoft.com as a suggestion. With Explorer pinned to the taskbar you can pin folders to Explorer, so they are in the jumplist for the explorer shortcut. I have a shortcut to CMD pinned to my taskbar and would like to be able to do the same concept, ... that is to be able to pin a bat/cmd file to the CMD shortcut, so in the CMD jumplist, I could have quick access to a couple batch files I use routinely. Anyone know a way to do this? I tried just dragging the batch file to the CMD shortcut on the taskbar like how you do with folders and Explorer, but that did not work.

  Read the article

• Spoof user agent for GoGo Inflight Internet?

  - by AndyL

  Is it possible to trick the GoGo Inflight WiFi on airlines into thinking that you have a mobile device instead of a laptop? It seems like most airlines that offer in flight wireless these days use GoGo. They offer different pricing for mobile and laptops. It seems like they are checking the browser's user agent. Out of curiosity, is it possible to use a Firefox extension like this one to spoof the user-agent and allow a laptop to access the internet under a GoGo mobile plan? How would GoGo handle something like an IMAP email client, like Thunderbird. Do IMAP clients have a user-agent field as well that would normally identify whether the mail client is running on a laptop or mobile device?

  Read the article

• How can I view my IIS hosted sites on other machines on my network

  - by Truegilly

  Hello, at home i have a simple network setup conatining 2 machines and 1 belkin router. On one machine i have a site hosted with IIS7. Rather than the standard localhost/index.htm address i have added an entry in the HOSTS file pointing the local ip (127.0.0.1) to this domain - www.mysite.dev. i can access the site with www.mysite.dev with no problem. what i would like to do is be able to view this site from my other machine on the network. initially i assumed this could be done with a url like so MACHINE-NAME/www.mysite.dev, but the connection always times out. But I can ping MACHINE-NAME without problems. For testing purposes i have diabled the windows firewall on both machines but to no joy. Like a typical web developer, my techy/network skills are pretty poor. Can anyone see where im going wrong ?? thank you for your time Truegilly :)

  Read the article

• Apple iOS Apps and caching at the edge proxy

  - by Matthew Iselin

  Our network contains a growing number of iOS devices, all of which with very similar configurations. All Internet access is via a transparent proxy. We've found that iOS updates and some free apps cache fine on the proxy, but any paid apps fail to cache properly (as they seem to be encrypted to the Apple ID (?)). I'm just wondering if there's any way forward with this where we could cache the paid apps so that they are purchased n times, but downloaded from the proxy cache instead of from the Internet each time. Bandwidth caps aside, the download direct from the Internet slows everything down for everyone, regardless of fairness queueing and related 'fixes'. I know this is quite unlikely, but I figured there's nothing to lose and everything to gain before I look into other solutions (eg, QoS).

  Read the article

• Strange behavior in networking between 64bit and 32bit

  - by Rob

  I'm having a strange behavior about my network setup. I have 2 laptops, one (Lenovo) with Windows 7 Professional 64-bit and another (Acer) with Windows 7 Ultimate 32-bit and a wireless router. I'm connecting these 2 using the router but with a strange behavior. I can ping both machines, as well as the router, but when i try to access their shared folders (\\computer_name\shared_folder) the connection starts to fail and I need to reboot both machines to get it working again. But this only happens sometimes, sometimes it works.

  Read the article

• Make favorites always visible in Windows Explorer

  - by gix

  Vista introduced the favorites in the navigation pane of Windows Explorer. In Windows 7 I immediately noticed that the favorites don't have a separate pane at the top anymore. See this image for a comparison. So to access the favorites (which I do a lot, I love that feature!) I always have to scroll to the top first which is quite annoying. Is there any way to restore the old behavior? I can't believe that they went a step backwards here.

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Citadel mail server software non-DIY alternatives

  - by microspino

  I have ha VPS on webbynode with Citadel groupware suite installed, but I'm not so happy with It. I would like to try other alternatives. This is a VPS where I do tons of experiment so it's better for me to avoid any DIY solution if not extremely easy to reinstall. In fact I destroy and rebuild this VPS frequently. I just need a mail server, with spam filtering and web access. No goupware features needed. Please don't suggest me to pass through gmail. :) Could you provide me 2 or 3 alternatives?

  Read the article

• Dovecot ignoring maximum number of IMAP connections

  - by Michelle

  I have a single mailbox mail server running Dovecot/Postfix and I have two IMAP clients, Thunderbird on the PC and K9 on Android. I keep on receiving this error in my logs even after I change the 'mail_max_userip_connections' variable to 50. puppet dovecot: imap-login: Maximum number of connections from user+IP exceeded (mail_max_userip_connections=10): user=<[email protected]>, method=PLAIN, rip=62.242.90.2, lip=198.29.31.229, TLS Why does it say that it is set to 10 in the log? Is that hardcoded? grep -r "mail_max_userip_connections" /etc/dovecot /etc/dovecot/conf.d/20-managesieve.conf: #mail_max_userip_connections = 10 /etc/dovecot/conf.d/20-pop3.conf: #mail_max_userip_connections = 3 /etc/dovecot/conf.d/20-imap.conf: mail_max_userip_connections = 50 I've restarted dovecot after making the changes but this error is still logged and I can't access the mailbox. Can anyone help me understand why I can't seem to raise the maximum limit?

  Read the article

• How to reset password for Dell PowerConnect 2708?

  - by oherrala

  I do as the user manual says and press "Managed Mode" button to get into unmanaged mode and then press "Managed Mode" button again for managed mode. This should reset the device to factory defaults and username "Admin" with no password. However, the device resets (I think) and I can access the web console from IP 192.168.2.1, but the username and password doesn't work. Maybe the device doesn't reset after all. Or the username/password has been changed in some firmware upgrade? What should I do to get into management of this switch?

  Read the article

• How to create a Linux Media Server using Ubuntu?

  - by Thomas

  Hello all: I'm an intermediate Linux user and a relative beginner to servers. I would like some help finding resources on setting up a basic server. I have Googled, and am a member of the Ubuntu Forums, but just figure it can't hurt to ask the Stack Overflow community for help as well. I plan on installing on an old laptop (Lenovo Thinkpad R61i or Toshiba Satellite A105). I have downloaded the latest Ubuntu (9.10) but don't know how to do any of the configurations. I just want a server to store my files where I can access (download and/ or stream) from a browser. Any help you can give is greatly appreciated. Thanks! Thomas

  Read the article

• Problems connecting Centos on VMware player to the network using bridged connection.

  - by Sakin

  Hi, I installed CentOs on VMware Player 3.0.1 running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

  Read the article

< Previous Page | 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024  | Next Page >