Search Results

Search found 27932 results on 1118 pages for 'finite state machine'.

Page 1019/1118 | < Previous Page | 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026  | Next Page >

• VS2010 express beta2 - no add reference dialog, no open file/project dialogs

  - by David

  Just installed VS2010 express for Windows Phone last night. Install went smoothly. It creates a project, compiles, and deploys the app to the emulator. Here's the problem: When I try to "Add Reference" through the Project menu, I do not get the Add Reference dialog box. Same thing if I right click References in the solution explorer and click Add Reference. That's not all. "File...Open" and "File...Open Project" also fail to throw up an open file dialog box. When attempting any of these actions, the IDE quickly loses and regains focus. Even pressing a keyboard shortcut (Ctrl+O) causes the IDE to quickly lose and regain focus, but no open file dialog box appears. This is what I have tried, not particularly in this order: 1. Turned off UAC 2. Monitored file and registry access using Process Monitor during a File...Open operation. File activity showed mostly "SUCCESS" with a few "FAST IO DISALLOWED" and a few "INVALID DEVICE REQUEST" results. Registry activity showed mostly "SUCCESS" with some "NAME NOT FOUND" and a few "BUFFER OVERFLOW" results. 3. Created a new, clean Windows account to run the IDE from 4. Forced a test project to add a reference to "System.Xml.Linq" by editing the ".csproj" project file. Project failed to load in the IDE. I don't have these problems at all on 2 other Windows 7 computers with VS2010 C# express beta 2 installed. One machine is 32bit and the other 64bit, both Home Premium edition. My system: Windows 7 Home Premium, 64bit Other Visual Studio products installed: VS2008 C# express, VS2008 C++ express One other thing to note: Several months ago I installed the non-phone distribution of VS2010 C# express beta 2, and I had the same exact problems. Back then I chalked it up to being beta and went back to VS2008 C# express, where I do not have these issues.

  Read the article

• Linux USB debug connection to LuminaryMicro evaluation board

  - by mikelong

  Hi, I am trying to connect a Stellaris LM3S8962 evaluation kit to a linux host machine. I am using the CodeSourcery G++ for the development toolchain. When I try to run a helloworld example the connection fails with this message: arm-stellaris-eabi-sprite: error: E104. I/O Error communicating with USB Device. arm-stellaris-eabi-sprite: waiting for GDB connection, to pass error along warning: Remote failure reply: E.fatal.E104. I/O Error communicating with USB Device. arm-stellaris-eabi-sprite: error: E002. Not initialized When I connect the evaluation board with the USB cable it seems the device is made available to the system: Mar 24 14:37:16 n6-ws2 kernel: usb 5-2: USB disconnect, address 5 Mar 24 14:37:18 n6-ws2 kernel: usb 5-2: new full speed USB device using uhci_hcd and address 6 Mar 24 14:37:19 n6-ws2 kernel: usb 5-2: configuration #1 chosen from 1 choice Also, it seems that I can connect in some way via the command line tool (but I do get some strange characters): [mlong@n6-ws2 bin]$ ./arm-stellaris-eabi-sprite -i CodeSourcery ARM Debug Sprite (Sourcery G++ 4.4-104) armusb: [speed=] ARMUSB device armusb:///?? - ?? (??) Does anyone have any suggestions I could try? Thanks a lot, Mike

  Read the article

• What's the best Scala build system?

  - by gatoatigrado

  I've seen questions about IDE's here -- Which is the best IDE for Scala development? and What is the current state of tooling for Scala?, but I've had mixed experiences with IDEs. Right now, I'm using the Eclipse IDE with the automatic workspace refresh option, and KDE 4's Kate as my text editor. Here are some of the problems I'd like to solve: use my own editor IDEs are really geared at everyone using their components. I like Kate better, but the refresh system is very annoying (it doesn't use inotify, rather, maybe a 10s polling interval). The reason I don't use the built-in text editor is because broken auto-complete functionalities cause the IDE to hang for maybe 10s. rebuild only modified files The Eclipse build system is broken. It doesn't know when to rebuild classes. I find myself almost half of the time going to project-clean. Worse, it seems even after it has finished building my project, a few minutes later it will pop up with some bizarre error (edit - these errors appear to be things that were previously solved with a project clean, but then come back up...). Finally, setting "Preferences / Continue launch if project contains errors" to "prompt" seems to have no effect for Scala projects (i.e. it always launches even if there are errors). build customization I can use the "nightly" release, but I'll want to modify and use my own Scala builds, not the compiler that's built into the IDE's plugin. It would also be nice to pass [e.g.] -Xprint:jvm to the compiler (to print out lowered code). fast compiling Though Eclipse doesn't always build right, it does seem snappy -- even more so than fsc. I looked at Ant and Maven, though haven't employed either yet (I'll also need to spend time solving #3 and #4). I wanted to see if anyone has other suggestions before I spend time getting a suboptimal build system working. Thanks in advance! UPDATE - I'm now using Maven, passing a project as a compiler plugin to it. It seems fast enough; I'm not sure what kind of jar caching Maven does. A current repository for Scala 2.8.0 is available [link]. The archetypes are very cool, and cross-platform support seems very good. However, about compile issues, I'm not sure if fsc is actually fixed, or my project is stable enough (e.g. class names aren't changing) -- running it manually doesn't bother me as much. If you'd like to see an example, feel free to browse the pom.xml files I'm using [github]. UPDATE 2 - from benchmarks I've seen, Daniel Spiewak is right that buildr's faster than Maven (and, if one is doing incremental changes, Maven's 10 second latency gets annoying), so if one can craft a compatible build file, then it's probably worth it...

  Read the article

• ServiceController.Stop() doesn't appear to be stopping anything

  - by peacedog

  My dev box is a Windows 7 (x64) machine. I've got some code (C#, .net 2.0) that in certain circumstances, checks to see if a service is running and then stops it. ServiceController matchedService = //My Service! //If statements and such matchedService.Stop(); matchedService.WaitForStatus(ServiceControllerStatus.Stopped); Now, I can verify MyService is in fact installed and running. I can tell you I am running Visual Studio 2008 as an administrator while debugging. I can also verify that after a couple of If statements, I wind up at the .Stop() and .WaitForStatus() portion of the programming. I do know that if step over the .Stop() call, the service itself just keeps running (looking at it in Services, though it occurs to me perhaps I should grab a better tool for this. I'm sure there's some sysinternals tool that might give me more information). As I step over the .WaitForStatus() call, I basically wind up waiting for the stopped status. . . forever. Well, I let it sit there for over 15 minutes yesterday (twice) and nothing happens. We never make it to the next line of code. It feels exactly like Bowie's Space Oddity (you know the part I am talking about). There's a lotta things about MyService you don't know anything about. Things you wouldn't understand. Things you couldn't. . . let me state this plainly. No services depend on MyService and MyService depends on no other services. Addendum MyOtherService and SonOfMyService both seem to behave correctly at this point in the code. All of these services share the same characteristics (they're our own services we hatched in a secret lab and have no dependencies). Is it possible there is something wrong with the MyService install or something? I do know that if I stop debugging at this point, MyService is still listed as running in Services (even after hitting refresh). If I try to restart it then (or run my application again and get to this point), I get a message about it not being able to accept control messages. After that, the service shows up as stopped and I can start it normally. Why isn't the service being stopped? Is this a quirk of win 7? A failing on my part to understand the ServiceController, or Win Services in general?

  Read the article

• Executing sequential stored procedures; works in query analyzer, doesn't in my .NET application

  - by evanmortland

  Hello, I have an audit record table that I am writing to. I am connecting to MyDb, which has a stored procedure called 'CreateAudit', which is a passthrough stored procedure to another database on the same machine called MyOther DB with a stored procedure called 'CreatedAudit' as well. In other words in MyDB I have CreateAudit, which does the following EXEC dbo.MyOtherDB.CreateAudit. I call the MyDb CreateAudit stored procedure from my application, using subsonic as the DAL. The first time I call it, I call it with the following (pseudocode): Result = CreateAudit(recordId, "Opened") One line after that, I call: Result2 = CreateAudit(recordId, "Closed") In my second stored procedure it is supposed to mark the record that was created by the CreateAudit(recordId, "Opened") with a status of closed. It works great if I run them independently of one another, but when they run in sequence in the application, the record is not marked as "Closed". When I run SQL profiler I see that both queries ran, and if I copy the queries out and run them from query analyzer the record gets marked as closed 100% of the time! When I run it from the application, about once every 20 times or so, the record is successfully marked closed - the other 19 times nothing happens, but I do not get an error! Is it possible for the .NET app to skip over the ouput from the first stored procedure and start executing the second stored procedure before the record in the first is created? When I add a "WAITFOR DELAY '00:00:00:003'" to the top of my stored procedure, the record is also closed 100% of the time. My head is spinning, any ideas why this is happening! Thanks for any responses, very interested in hearing how this can happen.

  Read the article

• How do I integrate a new MVC C# Project with an existing Web Forms VB.NET Web Application Project?

  - by Jordan Rieger

  We have a corporate website with a large amount of dynamic business application pages (e.g. Shopping Cart, Helpdesk, Product/Service management, Reporting, etc.) The site was built as an ASP.Net Web Application Project (WAP). Our systems have evolved over the years to use .NET 4.5 and various custom business logic DLLs (written in a mix of C# and VB.NET). However, the site itself is still using VB.NET Web Forms. We now have done a few side projects in MVC 4 using Razor/C#, and we want to use this framework for new pages on the main corporate site going forward. What would be the easiest way to achieve this? I found this nice list of steps to integrate MVC 4 into an existing Web Forms app. The problem is that because our existing app is a VB.NET WAP, it compiles into a single DLL, and .NET allows only one language per DLL. The site is way too big for us to contemplate converting it to C# all at once (yes, I've looked at the conversion tools, and they're good, but even 99% accuracy would leave us a huge amount of cleanup work.) I thought about converting the existing WAP into a Web Site Project (WSP) which does allow mixing languages and then following the steps above, but after a few pages of Google results, I couldn't find any steps for converting a WAP to WSP. (Plenty of sites offer the reverse steps: converting a WSP to a WAP.) Another idea I had was to create a completely separate MVC project, and then somehow squish them together into the same folder structure, where they would share the bin folder but compile to separate DLL's. I have no idea if this is possible, because certain files would collide (e.g. Global.asax, web.config, etc.) Finally, I can imagine a compromise solution where we keep all the MVC stuff in its own separate application under a subfolder of the main solution. We already use our own custom session state solution, so it wouldn't be difficult to pass data between the old site to the new pages. Which of the ideas above do you think makes the most sense for us? Is there another solution that I'm missing?

  Read the article

• Can't connect to MySql database from server using Devart

  - by annelie

  Hello, I'm having trouble connecting to a MySql database from a server. I'm using Devart to connect, and I'm not sure if I need to do something more than to simply reference the dlls. When I started working on this project it was referencing the CoreLabs dlls, which if I've understood is the previous name for Devart. That didn't work, so I downloaded the new Devart dlls instead. It works on my local machine, but when uploading to the server it crashes. I made a tiny console app to test the connection, and it fails when initialising, before I've even assigned a host etc. Do I need to do anything more than just upload my .exe file to the server? using System; using System.Collections.Generic; using System.Linq; using System.Text; using Devart.Data; using Devart.Data.MySql; namespace TestDatabaseConnection { public class Program { public static void Main(string[] args) { Console.WriteLine("about to connect"); ConnectToDatabase(); Console.ReadLine(); } public static void ConnectToDatabase() { MySqlConnection connection = new MySqlConnection(); } } } UPDATE: I can't see what the error is, I had a try catch around MySqlConnection connection = new MySqlConnection(); but no exception is thrown, it just crashes. Thanks, Annelie

  Read the article

• Anything speaking against the bitnami.org Ruby/Rails/Redmine Stack?

  - by Pekka

  I am looking to set up a Redmine server on a Windows virtual machine on my local workstation. (Background in this related question.) I have zero knowledge of Ruby nor Rails, and while Redmine may be the opportunity to dip into those platforms somewhat, my first goal is to get it running as quickly and easily as possible. For that, I am eyeing the Bitnami Redmine Package. It promises point-and-click install, and a self-contained environment with everything you need. Apart from the learning factor, are there any serious limitations this method implies? Any serious cutdowns in customizability? I will be wanting to customize the template right away, for example, and install plugins. The package looks o.k. to me but before I install it, I was curious to know whether anybody would advise against it and why. Edit: The first impression is great. From 0 to a working Redmine installation in twelve minutes! Wow.

  Read the article

• How to run White + SL4 UATs through TeamCity?

  - by Duncan Bayne

  After experiencing a series of unpleasant issues with TFS, including source code orruption and project management inflexibility, we (meaning the project team of which I'm a part) have decided to move from TFS 2010 to TeamCity + SVN + V1. I've managed to get our MSTest component and unit tests running as part of every build. However, our UATs are failing, and I was hoping for some advice from the TeamCity community as to best practices w.r.t. running web servers and interacting with the desktop. Each of our UAT fixtures starts a web server to host the site, like this: public static void StartWebServer() { var pathToSite = @"C:\projects\myproject\FrontEnd\MyProject.FrontEnd.Web"; var webServer = new Process { StartInfo = new ProcessStartInfo { Arguments = string.Format("/port:9150 /path:\"{0}\"", pathToSite), FileName = @"C:\Program Files (x86)\Common Files\microsoft shared\DevServer\10.0\WebDev.WebServer40.EXE" } }; webServer.Start(); } Needless to say, this doesn't work when running through TeamCity, as the pathToSite value is different each time. I'm hoping there is a way of determining the path into which the the code is checked out prior to building? That would allow me to point the web server at the right place. The other issue is that our UATs use White to drive the Silverlight UI through an instance of Internet Explorer: _browserWindow = InternetExplorer.Launch("http://localhost:9150/index.html#/Home", "Home - Windows Internet Explorer"); _document = _browserWindow.SilverlightDocument; I've ensured that the TeamCity service is granted the ability to interact with the desktop, and I've set the build agent machine up to log in automatically (an open session is a pre-requisite for White to work properly). Is that all I need to do or are there additional steps required?

  Read the article

• derby + hibernate ConstraintViolationException using manytomany relationships

  - by user364470

  Hi, I'm new to Hibernate+Derby... I've seen this issue mentioned throughout the google, but have not seen a proper resolution. This following code works fine with mysql, but when I try this on derby i get exceptions: ( each Tag has two sets of files and vise-versa - manytomany) Tags.java @Entity @Table(name="TAGS") public class Tags implements Serializable { @Id @GeneratedValue(strategy=GenerationType.AUTO) public long getId() { return id; } @ManyToMany(targetEntity=Files.class ) @ForeignKey(name="USER_TAGS_FILES",inverseName="USER_FILES_TAGS") @JoinTable(name="USERTAGS_FILES", joinColumns=@JoinColumn(name="TAGS_ID"), inverseJoinColumns=@JoinColumn(name="FILES_ID")) public Set<data.Files> getUserFiles() { return userFiles; } @ManyToMany(mappedBy="autoTags", targetEntity=data.Files.class) public Set<data.Files> getAutoFiles() { return autoFiles; } Files.java @Entity @Table(name="FILES") public class Files implements Serializable { @Id @GeneratedValue(strategy=GenerationType.AUTO) public long getId() { return id; } @ManyToMany(mappedBy="userFiles", targetEntity=data.Tags.class) public Set getUserTags() { return userTags; } @ManyToMany(targetEntity=Tags.class ) @ForeignKey(name="AUTO_FILES_TAGS",inverseName="AUTO_TAGS_FILES") @JoinTable(name="AUTOTAGS_FILES", joinColumns=@JoinColumn(name="FILES_ID"), inverseJoinColumns=@JoinColumn(name="TAGS_ID")) public Set getAutoTags() { return autoTags; } I add some data to the DB, but when running over Derby these exception turn up (the don't using mysql) Exceptions SEVERE: DELETE on table 'FILES' caused a violation of foreign key constraint 'USER_FILES_TAGS' for key (3). The statement has been rolled back. Jun 10, 2010 9:49:52 AM org.hibernate.event.def.AbstractFlushingEventListener performExecutions SEVERE: Could not synchronize database state with session org.hibernate.exception.ConstraintViolationException: could not delete: [data.Files#3] at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:96) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66) at org.hibernate.persister.entity.AbstractEntityPersister.delete(AbstractEntityPersister.java:2712) at org.hibernate.persister.entity.AbstractEntityPersister.delete(AbstractEntityPersister.java:2895) at org.hibernate.action.EntityDeleteAction.execute(EntityDeleteAction.java:97) at org.hibernate.engine.ActionQueue.execute(ActionQueue.java:268) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:260) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:184) at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:321) at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:51) at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1206) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:613) at org.hibernate.context.ThreadLocalSessionContext$TransactionProtectionWrapper.invoke(ThreadLocalSessionContext.java:344) at $Proxy13.flush(Unknown Source) at data.HibernateORM.removeFile(HibernateORM.java:285) at data.DataImp.removeFile(DataImp.java:195) at booting.DemoBootForTestUntilTestClassesExist.main(DemoBootForTestUntilTestClassesExist.java:62) I have never used derby before so maybe there is something crutal that i'm missing 1) what am I doing wrong? 2) is there any way of cascading properly when I have 2 many-to-many relationships between two classes? Thanks!

  Read the article

• Perl Parallel::ForkManager wait_all_children() takes excessively long time

  - by zhang18

  I have a script that uses Parallel::ForkManager. However, the wait_all_children() process takes incredibly long time even after all child-processes are completed. The way I know is by printing out some timestamps (see below). Does anyone have any idea what might be causing this (I have 16 CPU cores on my machine)? my $pm = Parallel::ForkManager->new(16) for my $i (1..16) { $pm->start($i) and next; ... do something within the child-process ... print (scalar localtime), " Process $i completed.\n"; $pm->finish(); } print (scalar localtime), " Waiting for some child process to finish.\n"; $pm->wait_all_children(); print (scalar localtime), " All processes finished.\n"; Clearly, I'll get the Waiting for some child process to finish message first, with a timestamp of, say, 7:08:35. Then I'll get a list of Process i completed messages, with the last one at 7:10:30. However, I do not receive the message All Processes finished until 7:16:33(!). Why is that 6-minute delay between 7:10:30 and 7:16:33? Thx!

  Read the article

• Why would fopen fail to open a file that exists?

  - by void

  I'm on Windows XP using Visual Studio 6 (yes I know it's old) building/maintaining a C++ DLL. I'm encountered a problem with fopen failing to open an existing file, it always returns NULL. I've tried: Checking errno and _doserrno by setting both to zero and then checking them again, both remain zero, and thus GetLastError() reports no errors. I know fopen isn't required to set errno when it encounters an error according to a C standard. Hardcoding the file path, which are not relative. Tried on another developers machine which the same result. The really strange thing is CreateFile works and the file can be read with ReadFile. We believe this works in a release build, however we are also seeing some very odd behaviour in other areas of the application and we're not sure if this is related. The code is below, I don't see anything odd it looks quite standard to me. The source file hasn't changed for just under half a year. HRESULT CDataHandler::LoadFile( CStdString szFilePath ) { //Code FILE* pFile; if ( NULL == ( pFile = fopen( szFilePath.c_str(), "rb") ) ) { return S_FALSE; } //More code }

  Read the article

• How can I set up a git repository on windows, and then push to/pull from it on Mac OSX

  - by Eric S.

  I'm trying to set up a Windows-based web server, but do the development work on Mac OSX. I installed freeSSHd and msysGit on the Windows server, and set up a repository where I want it. I also have git on my Mac and set up a repo there too. When I try to clone, pull from, or push to the windows repo via SSH, it gives me an error, "fatal: protocol error: bad line length character" It doesn't matter what I set the remote to in my client (Mac OSX) machine - I can point it to a folder that doesn't exist and it still gives me that error. I also tried this on a Linux box I have sitting around and it works perfectly, so it's not my Mac. I have a couple ideas: Maybe freeSSHd isn't behaving correctly (as suggested here) so I could get a different SSH server for Windows - perhaps OpenSSH Perhaps I'm typing the code that combines Mac and Windows file paths incorrectly. I tried: sudo git clone ssh://[email protected]/C:/Users/[my_username]/[remote_repo_name]/.git [destination] and sudo git clone ssh://[email protected]/C:\Users\[my_username]\[remote_repo_name]\.git [destination] I'm getting the same error with both of these. Does anybody know what's going wrong? Better yet, is there anybody out there that has managed to do what I want to do (push to and pull from a windows repository via SSH)? Thanks!

  Read the article

• embedded SWF isn't shown (SWFLoader)

  - by Trantec

  I embed a swf as ByteArray and load it at runtime with the SWFLoader. Here is the internal swf that I want to load: <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"> <mx:Label id="rLabel" text="From InternalSWF"/> </mx:Application> The embeding swf loads it with the following code: <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" applicationComplete="main();"> <mx:Script> <![CDATA[ import mx.managers.SystemManager; import mx.events.FlexEvent; [Embed(source="../../InternalSWF/bin-release/InternalSWF.swf", mimeType="application/octet-stream")] mimeType="application/octet-stream")] private const internalSWF:Class; public function main(): void { var binary:ByteArray = new internalSWF() as ByteArray; // setup swfloader rSwfLoader.trustContent = true; rSwfLoader.addEventListener( Event.COMPLETE, onSWFLoaded ); rSwfLoader.load(binary); } public function onSWFLoaded( event:Event ): void { } ]]> </mx:Script> <mx:Box> <mx:SWFLoader id="rSwfLoader" height="100%" width="100%" scaleContent="true"/> <mx:Text id="rText" text="from EmbedingSWF"/> </mx:Box> The label "from EmbedingSWF" is shown on both, local and on the webserver. But the label with "From InternalSWF" isn't shown on the webserver, just on the local machine. With some tests I found out that the internal swf is loaded correctly, because it's later added applicationComplete-Function is called. Is this a bug in Adobe-Flash-Player or am I missunderstanding something ? Update: Internet Explorer is fine. Firefox and Chrome not...

  Read the article

• changing default my.cnf path in mysql

  - by user377941

  I am having two mysql instances on same machine. The installations are on /usr/loca/mysql1 and /usr/local/mysql2. I m having separate my.cnf files located in /etc/mysql1 and /etc/mysql2. I installed the first instance of my sql using source distribution and with the --prefix=/usr/local/mysql1 option. The second one i got from copying and pastinf the same directory to /usr/local/mysql2. When i start the mysql daemon on /usr.local/mysql/libexec it reads the my.cnf file in /etc/mysql1. And if i start the mysql daemon in /usr/local/mysql2 it reads the same my.cnf file. I have separate port numbers and .sock files defined in the .cnf file in those 2 locations. I can read the my.cnf file in the second location by using --defaults-file=/etc/mysql2/my.cnf option on mysqld startup. I dnt need to enter this each and every time i start the daemon. If i am going to have more instances how can i point the correct my.cnf file to read to each and every mysql daemon. What is the retionale behind mysqld links with the my.cnf file. how can i predefine the location of my.cnf file for each instance.

  Read the article

• Forcing a checkbox bound to a DataSource to update when it has not been viewed yet.

  - by Scott Chamberlain

  Here is a test framework to show what I am doing: create a new project add a tabbed control on tab 1 put a button on tab 2 put a check box paste this code for its code (use default names for controls) public partial class Form1 : Form { private List<bool> boolList = new List<bool>(); BindingSource bs = new BindingSource(); public Form1() { InitializeComponent(); boolList.Add(false); bs.DataSource = boolList; checkBox1.DataBindings.Add("Checked", bs, ""); this.button1.Click += new System.EventHandler(this.button1_Click); this.checkBox1.CheckedChanged += new System.EventHandler(this.checkBox1_CheckedChanged); } bool updating = false; private void button1_Click(object sender, EventArgs e) { updating = true; boolList[0] = true; bs.ResetBindings(false); Application.DoEvents(); updating = false; } private void checkBox1_CheckedChanged(object sender, EventArgs e) { if (!updating) MessageBox.Show("CheckChanged fired outside of updating"); } } The issue is if you run the program and look at tab 2 then press the button on tab 1 the program works as expected, however if you press the button on tab 1 then look at tab 2 the event for the checkbox will not fire untill you look at tab 2. The reason for this is the controll on tab 2 is not in the "created" state, so its binding to change the checkbox from unchecked to checked does not happen until after the control has been "Created". checkbox1.CreateControl() does not do anything because according to MSDN CreateControl does not create a control handle if the control's Visible property is false. You can either call the CreateHandle method or access the Handle property to create the control's handle regardless of the control's visibility, but in this case, no window handles are created for the control's children. I tried getting the value of Handle(there is no public CreateHandle() for CheckBox) but still the same result. Any suggestions other than have the program quickly flash all of my tabs that have data-bound check boxes when it first loads? EDIT-- per Jaxidian's suggestion I created a new class public class newcheckbox : CheckBox { public new void CreateHandle() { base.CreateHandle(); } } I call CreateHandle() right after updating = true same results as before.

  Read the article

• How to do logout functionality in C# smart device application?

  - by Shailesh Jaiswal

  I am developng Smart device application in C#. It is a window application. In this application I am using Login form to authenticate the users. Only authenticated users can login into the system. In this application I am calling java web services which resides on another machine. I am passing mobile number & password from mu application's login form to the java web services. The java web services returns the userid after successful authentication. I made this userid static so that it can be used frequently with other web services. I using statc variables in this application so that they can be used at application level. After deploying the application I can see that emulator provides the close button with multiplicaton symbol. In this way I can close my form as well as application. But I want to provde one logout link in my application. Can I provide logout functionality in C# window application ? If yes, how to do that ? Please make sure that all the functions of .net framework does not work with .net compact framwork? Can you provide me the code or link through which can resolve the above issue ?

  Read the article

• Editing a .class file directly, playing around with opcodes

  - by echox

  Hi, today I just tried to play a little bit around with the opcodes in compiled java class file. After inserting iinc 1,1 the java virtual machine responds with: Exception in thread "main" java.lang.ClassFormatError: Truncated class file at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632) at java.lang.ClassLoader.defineClass(ClassLoader.java:616) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141) at java.net.URLClassLoader.defineClass(URLClassLoader.java:283) at java.net.URLClassLoader.access$000(URLClassLoader.java:58) at java.net.URLClassLoader$1.run(URLClassLoader.java:197) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) Could not find the main class: Test. Program will exit. This is my example source code: public class Test { public static void main(String[] args) { int i = 5; i++; i++; i++; System.out.println("Number: " + i + "\n"); } } The opcode for an increment is 0x84 + 2 bytes for operands. There's only one section in the resulting class file, which contains 0x84: [..] 8401 0184 0101 8401 01[..] So I would translate this as: iinc 1,1 iinc 1,1 iinc 1,1 corresponding to my i++; i++; i++; I then tried to append just 840101 to increment the variable once more, but that didn't work and resulted in the ClassFormatError. Is there anything like a checksum for the class file? I looked up the format of a classfile in http://java.sun.com/docs/books/jvms/second_edition/html/ClassFile.doc.html but could not find anything which points out to some kind of bytes_of_classfile or something. I also don't understand why the error is "Truncated Class File", because I did append something :-) I know its not a good idea to edit class files directly, but I'm just interested on the VM internals here.

  Read the article

• How to parse rss from a php page, using jQuery/jFeed?

  - by ricebowl

  I'm trying to fumble my way through parsing rss sensibly, using jQuery and jFeed. Because of the same origin policy I'm pulling the BBC's health news feed into a local page (http://www.davidrhysthomas.co.uk/play/proxy.php). Originally this was just the same proxy.php script as available in the jFeed download package, but due to my host's disabling allow_url_fopen() I've amended the php to the following: $url = "http://newsrss.bbc.co.uk/rss/newsonline_uk_edition/health/rss.xml"; $ch = curl_init(); curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_HEADER, 0); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); $data = curl_exec($ch); echo "$data"; curl_close($ch); Which seems to generate the same/comparable contents as the original fopen on my local machine. Now that seems to be working, I'm looking at setting the jFeed script up to work with the page and, to my embarrassment, don't see how. I understand that, at the least, this should work: jQuery.getFeed({ url: 'http://www.davidrhysthomas.co.uk/play/proxy.php', success: function(feed) { alert(feed.title); } }); ...but, as I'm sure you anticipate, it doesn't. What non-output there is, is available for your perusal here: http://www.davidrhysthomas.co.uk/play/exampleTest.html. And I honestly don't have a clue what to do about it. If anyone could offer some pointers, tips, hints, or, at a pinch, a quick slap around the cheeks and a 'pull yourself together!' it'd be much appreciated... Thanks in advance =)

  Read the article

• Does Java 6 open a default port for JMX remote connections?

  - by Bob Cross

  My specific question has to do with JMX as used in JDK 1.6: if I am running a Java process using JRE 1.6 with com.sun.management.jmxremote in the command line, does Java pick a default port for remote JMX connections? Backstory: I am currently trying to develop a procedure to give to a customer that will enable them to connect to one of our processes via JMX from a remote machine. The goal is to facillitate their remote debugging of a situation occurring on a real-time display console. Because of their service level agreement, they are strongly motivated to capture as much data as possible and, if the situation looks too complicated to fix quickly, to restart the display console and allow it to reconnect to the server-side. I am aware the I could run jconsole on JDK 1.6 processes and jvisualvm on post-JDK 1.6.7 processes given physical access to the console. However, because of the operational requirements and people problems involved, we are strongly motivated to grab the data that we need remotely and get them up and running again. EDIT: I am aware of the command line port property com.sun.management.jmxremote.port=portNum The question that I am trying to answer is, if you do not set that property at the command line, does Java pick another port for remote monitoring? If so, how could you determine what it might be?

  Read the article

• Constructor versus setter injection

  - by Chris

  Hi, I'm currently designing an API where I wish to allow configuration via a variety of methods. One method is via an XML configuration schema and another method is through an API that I wish to play nicely with Spring. My XML schema parsing code was previously hidden and therefore the only concern was for it to work but now I wish to build a public API and I'm quite concerned about best-practice. It seems that many favor javabean type PoJo's with default zero parameter constructors and then setter injection. The problem I am trying to tackle is that some setter methods implementations are dependent on other setter methods being called before them in sequence. I could write anal setters that will tolerate themselves being called in many orders but that will not solve the problem of a user forgetting to set the appropriate setter and therefore the bean being in an incomplete state. The only solution I can think of is to forget about the objects being 'beans' and enforce the required parameters via constructor injection. An example of this is in the default setting of the id of a component based on the id of the parent components. My Interface public interface IMyIdentityInterface { public String getId(); /* A null value should create a unique meaningful default */ public void setId(String id); public IMyIdentityInterface getParent(); public void setParent(IMyIdentityInterface parent); } Base Implementation of interface: public abstract class MyIdentityBaseClass implements IMyIdentityInterface { private String _id; private IMyIdentityInterface _parent; public MyIdentityBaseClass () {} @Override public String getId() { return _id; } /** * If the id is null, then use the id of the parent component * appended with a lower-cased simple name of the current impl * class along with a counter suffix to enforce uniqueness */ @Override public void setId(String id) { if (id == null) { IMyIdentityInterface parent = getParent(); if (parent == null) { // this may be the top level component or it may be that // the user called setId() before setParent(..) } else { _id = Helpers.makeIdFromParent(parent,getClass()); } } else { _id = id; } } @Override public IMyIdentityInterface getParent() { return _parent; } @Override public void setParent(IMyIdentityInterface parent) { _parent = parent; } } Every component in the framework will have a parent except for the top level component. Using the setter type of injection, then the setters will have different behavior based on the order of the calling of the setters. In this case, would you agree, that a constructor taking a reference to the parent is better and dropping the parent setter method from the interface entirely? Is it considered bad practice if I wish to be able to configure these components using an IoC container? Chris

  Read the article

• Ruby Fileutils.cp_r Permission Denied when :preserve => true

  - by slawley

  Hello, I am trying to implement a poor-man's backup/mirroring script and am having some trouble. I am on Windows-XP, using Ruby's FileUtils module to recursively copy files. So long as I don't set the :preserve flag to true, everything works fine. Works: FileUtils.cp_r('Source_dir', 'Dest_dir', :verbose => true) Doesn't work: FileUtils.cp_r('Source_dir', 'Dest_dir', :verbose => true, :preserve => true) I have full permissions on the Dest_dir as it's on the desktop of my local machine and I just created it. I can copy and delete files and folders, but apparently changing, or maintaining the file attributes with :preserve isn't working. I haven't had a chance to try this on a Mac or linux box, but from reading around online the :preserve flag is a normal stumbling block to come up against in a Windows environment. In a similar line of questioning, what is the default behavior for FileUtils.cp_r when it encounters an existing file at the destination directory? Simply overwrite and replace everything in Destination with whatever is in Source, or can I skip a file with conflicts and just log it for resolution later? (If this should be a separate question, just let me know and I'll make it one.) Thanks, Spencer

  Read the article

• iPhone noob - setting NSMutableDictionary entry inside Singleton?

  - by codemonkey

  Yet another iPhone/Objective-C noob question. I'm using a singleton to store app state information. I'm including the singleton in a Utilities class that holds it (and eventually other stuff). This utilities class is in turn included and used from various view controllers, etc. The utilities class is set up like this: // Utilities.h #import <Foundation/Foundation.h> @interface Utilities : NSObject { } + (id)GetAppState; - (id)GetAppDelegate; @end // Utilities.m #import "Utilities.h" #import "CHAPPAppDelegate.h" #import "AppState.h" @implementation Utilities CHAPPAppDelegate* GetAppDelegate() { return (CHAPPAppDelegate *)[UIApplication sharedApplication].delegate; } AppState* GetAppState() { return [GetAppDelegate() appState]; } @end ... and the AppState singleton looks like this: // AppState.h #import <Foundation/Foundation.h> @interface AppState : NSObject { NSMutableDictionary *challenge; NSString *challengeID; } @property (nonatomic, retain) NSMutableDictionary *challenge; @property (nonatomic, retain) NSString *challengeID; + (id)appState; @end // AppState.m #import "AppState.h" static AppState *neoAppState = nil; @implementation AppState @synthesize challengeID; @synthesize challenge; # pragma mark Singleton methods + (id)appState { @synchronized(self) { if (neoAppState == nil) [[self alloc] init]; } return neoAppState; } + (id)allocWithZone:(NSZone *)zone { @synchronized(self) { if (neoAppState == nil) { neoAppState = [super allocWithZone:zone]; return neoAppState; } } return nil; } - (id)copyWithZone:(NSZone *)zone { return self; } - (id)retain { return self; } - (unsigned)retainCount { return UINT_MAX; //denotes an object that cannot be released } - (void)release { // never release } - (id)init { if (self = [super init]) { challengeID = [[NSString alloc] initWithString:@"0"]; challenge = [NSMutableDictionary dictionary]; } return self; } - (void)dealloc { // should never be called, but just here for clarity [super dealloc]; } @end ... then, from a view controller I'm able to set the singleton's "challengeID" property like this: [GetAppState() setValue:@"wassup" forKey:@"challengeID"]; ... but when I try to set one of the "challenge" dictionary entry values like this: [[GetAppState() challenge] setObject:@"wassup" forKey:@"wassup"]; ... it fails giving me an "unrecognized selector sent..." error. I'm probably doing something really obviously dumb? Any insights/suggestions will be appreciated.

  Read the article

• Sensible unit test possible?

  - by nkr1pt

  Could a sensible unit test be written for this code which extracts a rar archive by delegating it to a capable tool on the host system if one exists? I can write a test case based on the fact that my machine runs linux and the unrar tool is installed, but if another developer who runs windows would check out the code the test would fail, although there would be nothing wrong with the extractor code. I need to find a way to write a meaningful test which is not binded to the system and unrar tool installed. How would you tackle this? public class Extractor { private EventBus eventBus; private ExtractCommand[] linuxExtractCommands = new ExtractCommand[]{new LinuxUnrarCommand()}; private ExtractCommand[] windowsExtractCommands = new ExtractCommand[]{}; private ExtractCommand[] macExtractCommands = new ExtractCommand[]{}; @Inject public Extractor(EventBus eventBus) { this.eventBus = eventBus; } public boolean extract(DownloadCandidate downloadCandidate) { for (ExtractCommand command : getSystemSpecificExtractCommands()) { if (command.extract(downloadCandidate)) { eventBus.fireEvent(this, new ExtractCompletedEvent()); return true; } } eventBus.fireEvent(this, new ExtractFailedEvent()); return false; } private ExtractCommand[] getSystemSpecificExtractCommands() { String os = System.getProperty("os.name"); if (Pattern.compile("linux", Pattern.CASE_INSENSITIVE).matcher(os).find()) { return linuxExtractCommands; } else if (Pattern.compile("windows", Pattern.CASE_INSENSITIVE).matcher(os).find()) { return windowsExtractCommands; } else if (Pattern.compile("mac os x", Pattern.CASE_INSENSITIVE).matcher(os).find()) { return macExtractCommands; } return null; } }

  Read the article

• Perl: how to pretty-print time duration

  - by sds

  How do I pretty print time duration in perl? The only thing I could come up with so far is my $interval = 1351521657387 - 1351515910623; # milliseconds my $duration = DateTime::Duration->new( seconds => POSIX::floor($interval/1000) , nanoseconds => 1000000 * ($interval % 1000), ); my $df = DateTime::Format::Duration->new( pattern => '%Y years, %m months, %e days, ' . '%H hours, %M minutes, %S seconds, %N nanoseconds', normalize => 1, ); print $df->format_duration($duration); which results in 0 years, 00 months, 0 days, 01 hours, 35 minutes, 46 seconds, 764000000 nanoseconds This is no good for me for the following reasons: I don't want to see "0 years" (space waste) &c and I don't want to remove "%Y years" from the pattern (what if I do need years next time?) I know in advance that my precision is only milliseconds, I don't want to see the 6 zeros in the nanoseconds part. I care about prettiness/compactness/human readability much more than about precision/machine readability. I.e., I want to see something like "1.2 years" or "3.22 months" or "7.88 days" or "5.7 hours" or "75.5 minutes" (or "1.26 hours, whatever looks better to you) or "24.7 seconds" or "133.7 milliseconds" &c (similar to how R prints difftime)

  Read the article

< Previous Page | 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026  | Next Page >