Search Results

Search found 2798 results on 112 pages for 'ftp'.

Page 102/112 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Experiences with (free) embedded TCP / IP stacks?

  - by Dan

  Does anyone have especially good (or bad) experiences with any of the following embedded TCP / IP stacks? uIP lwIP Bentham's TCP/IP Lean implementation The TCP/IP stack from this book My needs are for a solid, easy-to-port stack. Code size isn't terribly important, performance is relatively important, but ease of use & porting is very important. The system will probably use an RTOS, that hasn't been decided, but in my experience most stacks can be used with or without an RTOS. Most likely the platform will be an ARM variant (ARM7 or CM3 in all likelihood). Not too concerned about bolting the stack to the Ethernet driver, so that isn't a big priority in the selection. I'm not terribly interested in extracting a stack out of an OS, such as Linux, RTEMS, etc. I'm also not interested in commercial offerings such as Interniche, Micrium, etc... The stack doesn't need all sorts of bells & whistles, doesn't need IPv6, and I don't need any stuff on top of it (web servers, FTP servers, etc..) In fact it's possible that I'll only use UDP, although I can envision a couple scenarios where TCP would be preferable. Experiences with other stacks I've missed are of course also very much of interest. Thanks for your time & input.

  Read the article

• Status Code from FTPWebRequest GetResponse method

  - by nick

  This is slightly tricky. I am uploading files to FTP asynchronously. After uploading each file I am checking the status of the upload operation for that file. This can be done with StatusCode property of the FtpWebResponse object for that request. The code snippet is as give below. System.IO.FileStream fs = System.IO.File.Open(fileName, System.IO.FileMode.Open); while ((iWork = fs.Read(buf, 0, buf.Length)) > 0) requestStream.Write(buf, 0, iWork); requestStream.Close(); FtpWebResponse wrRet = ((FtpWebResponse)state.Request.GetResponse()); There are about 37 StatusCode values as per msdn. I am unaware as to which of these status code values will assure that the file is uploaded successfully. Some of them I used in my code to check for success are : wrRet.StatusCode == FtpStatusCode.CommandOK wrRet.StatusCode == FtpStatusCode.ClosingData wrRet.StatusCode == FtpStatusCode.ClosingControl wrRet.StatusCode == FtpStatusCode.ConnectionClosed wrRet.StatusCode == FtpStatusCode.FileActionOK wrRet.StatusCode == FtpStatusCode.FileStatus But I am unaware of the rest. I need to be sure about these codes because based on the failure or success of the upload operation I have other dependant operations to be carried out. A wrong condition can affect the remaining code. Another thought that crossed my mind was to simply put the above code into a try..catch and not depend on these status codes. With this I would not be depending on the status codes and assuming that any failure will always be directed to the catch block. Kindly let me know if this is the right way. Thanks in advance.

  Read the article

• Programmatically open an email from a POP3 and extract an attachment

  - by Josh

  We have a vendor that sends CSV files as email attachments. These CSV files contain statuses that are imported into our application. I'm trying to automate the process end-to-end, but it currently depends on someone opening an email, saving the attachment to a server share, so the application can use the file. Since I cannot convince the vendor to change their process, such as offering an FTP location or a Web Service, I'm stuck with trying to automate the existing process. Does anyone know of a way to programmatically open an email from a POP3 account and extract an attachment? The preferred solution would reside on a Windows 2003 server, be written VB.NET and secure. The application can reside on the same server as the POP3 server, for example, we could setup the free POP3 server that comes with Windows Server and pull against the mail file stored on the file system. BTW, we are willing to pay for an off-the-shelf solution, if one exists. Note: I did look at this question but the answer points to a CodeProject solution that doesn't deal with attachments.

  Read the article

• Adding editFTPnetPRO to SSIS package causes error message

  - by gfrizzle

  I'm trying to add some secure FTP code to an SSIS package. I've used the EnterpriseDT product successfully on other .NET projects, so I wanted to incorporate it into an SSIS 2008 package I'm working on. If I create a Script Task (VB), edit the script, choose Project | Add Reference, and select the editFTPnetPRO.dll file, it comes back with this error: No template information found. See the application log in Event Viewer for more details. To open Event Viewer, click Start, click Control Panel, double-click Administrative Tools, and then double-click Event Viewer. The application log doesn't contain any pertinent details. I have no idea what this is trying to tell me. I've gone down a couple dead ends searching for this error message and following the prescribed fixes, but nothing has fixed it yet. Any idea what might be going wrong? P.S. - I tried the devenv.exe /installvstemplates fix, which didn't change anything. Update: Here is the error captured in the SSIS package when you try to run it: Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. --- System.IO.FileNotFoundException: Could not load file or assembly 'edtFTPnetPRO, Version=6.3.1.20, Culture=neutral, PublicKeyToken=0dce1ad63760d80b' or one of its dependencies. The system cannot find the file specified. Where is it looking for this file? I tried copying it to the project direcory, the bin folder, and the C:\WINDOWS\Microsoft.NET\Framework\v2.0.nnnn folder, but it still can't find it, and it won't tell me where it's looking.

  Read the article

• Efficient data importing?

  - by Kevin

  We work with a lot of real estate, and while rearchitecting how the data is imported, I came across an interesting issue. Firstly, the way our system works (loosely speaking) is we run a Coldfusion process once a day that retrieves data provided from an IDX vendor via FTP. They push the data to us. Whatever they send us is what we get. Over the years, this has proven to be rather unstable. I am rearchitecting it with PHP on the RETS standard, which uses SOAP methods of retrieving data, which is already proven to be much better than what we had. When it comes to 'updating' existing data, my initial thought was to query only for data that was updated. There is a field for 'Modified' that tells you when a listing was last updated, and the code I have will grab any listing updated within the last 6 hours (give myself a window in case something goes wrong). However, I see a lot of real estate developers suggest creating 'batch' processes that run through all listings regardless of updated status that is constantly running. Is this the better way to do it? Or am I fine with just grabbing the data I know I need? It doesn't make a lot of sense to me to do more processing than necessary. Thoughts?

  Read the article

• mySQL ORDER BY ASC works, DESC does not...

  - by Ben

  I've "integrated" SMF into Wordpress by querying the forum for a list of the most recent videos from a specific forum board and displaying them on the Wordpress homepage. However when I add the ORDER BY clause, the query (which I tested on other parts of the same page successfully), breaks. To add to the mix, I am using the Auto Embed plugin to allow the videos to be played on the homepage, as well as using a jCarousel feature to rotate them. People were kind enough to help me here last time with the regexp to filter the video urls, I'm hoping for the same luck this time! Here is the entire function (remove the DESC and it works...): function SMF_getRecentVids($limit=10){ global $smf_settingsphp_d; if(file_exists($smf_settingsphp_d)) include($smf_settingsphp_d); include "AutoEmbed-1.4/AutoEmbed.class.php"; $AE = new AutoEmbed(); $connect = new wpdb($db_user,$db_passwd,$db_name,$db_server); $connect->query("SET NAMES 'UTF8'"); $sql = SELECT m.subject, m.ID_MSG, m.body, m.ID_TOPIC, m.ID_BOARD, t.ID_FIRST_MSG FROM {$db_prefix}messages AS m LEFT JOIN {$db_prefix}topics AS t ON (m.ID_TOPIC = t.ID_TOPIC) WHERE (m.ID_BOARD = 8) ORDER BY t.ID_FIRST_MSG DESC"; $vids = $connect->get_results($sql); $c = 0; $content = "imageCarousel_itemList = ["; foreach ($vids as $vid) { if ($c > $limit) continue; //extract video code from body $input = $vid->body; $regexp = "/\b(?:(?:https?|ftp):\/\/|www\.)[-a-z0-9+&@#\/%?=~_|!:,.;]*[-a-z0-9+&@#\/%=~_|]/i"; if(preg_match_all($regexp, $input, $matches)) { $AE->parseUrl($matches[0][0]); $imageURL = $AE->getImageURL(); $AE->setWidth(290); $AE->setHeight(240); $content .= "{url: '".$AE->getEmbedCode()."', title: '".$vid->subject."', caption: '', description: ''},"; } $c++; } $content .= "]"; echo $content; $wpdb = new wpdb(DB_USER, DB_PASSWORD, DB_NAME, DB_HOST); }

  Read the article

• Register filetype with the browser?

  - by Lord.Quackstar

  In Android, I am trying to make it so that the user downloads a font from the browser, and I am able to view the font when downloaded. After multiple issues, I still have one lingering one: Registering the filetype with the browser. When trying to download with the Emulator (2.1-u1), I get "Cannot download. The content is not supported on this phone". Okay, so maybe its my manifest file. Updated with this: <activity android:name=".MainActivity" android:label="MainActivity"> <intent-filter> <action android:name="android.intent.action.MAIN"/> <category android:name="android.intent.category.LAUNCHER"/> <catagory android:name="android.intent.category.BROWSABLE"/> <data android:scheme="http"/> <data android:scheme="https"/> <data android:scheme="ftp"/> <data android:host="*"/> <data android:mimeType="*/*"/> <data android:pathPattern=".*zip"/> </intent-filter> </activity> Went back to the browser, and fails again. Restart the Emulator, still fails. Note that I got this format from posts here. Any suggestions on what to do?

  Read the article

• Ruby ICalendar Gem: How to get e-mail reminders working.

  - by Jenny

  I'm trying to work out how to use the icalendar ruby gem, found at: http://icalendar.rubyforge.org/ According to their tutorial, you do something like: cal.event.do # ...other event properties alarm do action "EMAIL" description "This is an event reminder" # email body (required) summary "Alarm notification" # email subject (required) attendees %w(mailto:[email protected] mailto:[email protected]) # one or more email recipients (required) add_attendee "mailto:[email protected]" remove_attendee "mailto:[email protected]" trigger "-PT15M" # 15 minutes before add_attach "ftp://host.com/novo-procs/felizano.exe", {"FMTTYPE" => "application/binary"} # email attachments (optional) end alarm do action "DISPLAY" # This line isn't necessary, it's the default summary "Alarm notification" trigger "-P1DT0H0M0S" # 1 day before end alarm do action "AUDIO" trigger "-PT15M" add_attach "Basso", {"VALUE" => ["URI"]} # only one attach allowed (optional) end So, I am doing something similar in my code. def schedule_event puts "Scheduling an event for " + self.title + " at " + self.start_time start = self.start_time endt = self.start_time title = self.title desc = self.description chan = self.channel.name # Create a calendar with an event (standard method) cal = Calendar.new cal.event do dtstart Program.convertToDate(start) dtend Program.convertToDate(endt) summary "Want to watch" + title + "on: " + chan + " at: " + start description desc klass "PRIVATE" alarm do action "EMAIL" description desc # email body (required) summary "Want to watch" + title + "on: " + chan + " at: " + start # email subject (required) attendees %w(mailto:[email protected]) # one or more email recipients (required) trigger "-PT25M" # 25 minutes before end end However, I never see any e-mail sent to my account... I have even tried hard coding the start times to be Time.now, and sending them out 0 minutes before, but no luck... Am I doing something glaringly wrong?

  Read the article

• Is it possible to unstick a remote IIS ASP server after an exception hangs the session?

  - by user89691

  I have been coding an app in classic ASP that accesses 2 Access databases. I had a page I was working on throw an exception, which is normal during development and causes no lasting problems. This time however, after the exception any attempt to open either of the databases would freeze the session with an infinite script timeout. If I delete the session cookie I an able to access ASP pages again until I try to open the database again. The database that was open when the exception was thrown is left open. There is a LDB lock file and I can't rename or delete either the LDB or MDB file, though I can download the MDB file with FTP. The 2nd access database is not open but any attempt to read this also hangs the session. Accessing HTML pages is fine. The site is hosted with Hostway and they are not interested ("Coding problem = Your problem" even though it leaves my site dead in the water, I suspect until the next reboot, whenever that might be). Here is the dump from the relevant ASP page that threw the exception: Active Server Pages error 'ASP 0115' Unexpected error /translatestats.asp A trappable error (C0000005) occurred in an external object. The script cannot continue running. Active Server Pages error 'ASP 0240' Script Engine Exception /translatestats.asp A ScriptEngine threw exception 'C0000005' in 'IActiveScript::Close()' from 'CActiveScriptEngine::FinalRelease()'. Is there any way I can unstick the site / force close the database remotely ?

  Read the article

• SSH traffic over openvpn freezes under weird circumstances

  - by user289581

  I have an openvpn (version 2.1_rc15 at both ends) connection setup between two gentoo boxes using shared keys. it works fine for the most part. I use mysql, http, ftp, scp over the vpn with no problems. But when I ssh from the client to the server over the vpn, weird things happen. I can login, i can execute some commands. But if i try to run an ncurses application like top, or i try to cat a file, the connection will stall and I'll have to sever the ssh session. I can, for example, execute "echo blah; echo .; echo blah" and it will output the three lines of text over the ssh session fine. But if i execute "cat /etc/motd" the session will freeze the moment I press enter. While it seems like a terminal emulation problem it makes no sense why using the vpn would affect the ability for ssh to render things correctly. I am at a loss to explain why everything else works, including scp, but ssh just breaks over the vpn. Any thoughts ?

  Read the article

• IO operation taking long time for files in remote server

  - by user841311

  I have files of size 150 MB each in a remote server in a different domain in the network. I am accessing them thorugh UNC path. I want to read the file content and perform a basic string search. When I try reading the files line by line, the operation just don't finish and takes long time, more than 30 minutes. However when I copy those files to my local machine, the same code reads and performs the string search in less than 5 seconds. I don't have .NET framework installed in the server so I have to do this from my machine. I want to perform all this through C# code in .NET framework 3.5 so I don't want to explictly ftp all the files to my machine before performing this operation. Sample Code DirectoryInfo dir = new DirectoryInfo(@strFilePath); FileInfo[] fiArray = dir.getFiles("*.txt"); foreach (FileInfo fi in fiArray) { //reading file content from server takes long time but fast in local machine //perform string search } Let me know if my requirement is not clear. Thanks in advance!

  Read the article

• Copy SQL Server data from one server to another on a schedule

  - by rwmnau

  I have a pair of SQL Servers at different webhosts, and I'm looking for a way to periodically update the one server using the other. Here's what I'm looking for: As automated as possible - ideally, without any involvement on my part once it's set up. Pushes a number of databases, in their entirely (including any schema changes) from one server to the other Freely allows changes on the source server without breaking my process. For this reason, I don't want to use replication, as I'd have to break it every time there's an update on the source, and then recreate the publication and subscription One database is about 4GB in size and contains binary data. I'm not sure if there's a way to export this to a script, but it would be a mammoth file if I did. Originally, I was thinking of writing something that takes a scheduled full backup of each database, FTPs the backups from one server to the other once they're done, and then the new server picks it up and restores it. The only downside I can see to this is that there's no way to know that the backups are done before starting to transfer them - can these backups be done synchronously? Also, the server being refreshes is our test server, so if there's some downtime involved in moving the data, that's fine. Does anybody out there have a better idea, or is what I'm currently considering the best non-replication way to go? Thanks for your help, everybody. UPDATE: I ended up designing a custom solution to get this done using BAT files, 7Zip,command line FTP, and OSQL, so it runs in a completely automatic way and aggregates the data from a dozen servers across the country. I've detailed the steps in a blog entry. Thanks for all your input!

  Read the article

• ASP.NET "Object reference not set..." error

  - by Roman

  Hi, I have a website written using ASP.NET. We have a development machine and a deployment server. The site works great on the development machine, but when is transfered (using simple FTP Upload) generates strange behavior. It starts working just fine, but after a while stops working and throws an exception "Exception: Object reference not set to an instance of an object.". The deal is that the absolute path of the website on the development machine is different than on the deployment server (and why should they be similar?) and the exact error is: Exception: Object reference not set to an instance of an object. at SOMEPROJECT_Objects.Player..ctor(Int32 PlayerID) in C:\inetpub\wwwroot\SOMEPROJECTSolution\ALLPROJECT\SOMEPROJECT_Objects\Player.cs:line 123 at SOMEPROJECT_GameLayer.M_Game.PlayerActiveGame(Int32 PlayerID) in C:\inetpub\wwwroot\SOMEPROJECTSolution\ALLPROJECT\SOMEPROJECT_GameLayer\M_Game.cs:line 85 at Web.getsms.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\SOMEPROJECTSolution\ALLPROJECT\SOMEPROJECT-sms\Web\getsms.aspx.cs:line 59 The address that it is looking for is the address on the DEVELOPMENT machine, where as the site now resides on the deployment server. Any ideas why this happens would be appreciated. Thanks, Roman

  Read the article

• questions about using svn

  - by ajsie

  i have set up a svn repository in a remote ubuntu server using webdav (http://ip/svn). but i have some questions: should i create one svn repository for each project folder? so i should use "svnadmin create" 5 times for 5 projects? or should i import them to seperate folders in the svn repository? should i after i have created a svn repo, import one project folder into it with "svn import" and then DELETE my original local folder thus only having it in the svn repo in the remote ubuntu server? is this safe or should i still have a local copy for some reason (cause i wont work in that one)? i use netbeans to check out projects from svn repo, then i edit the files and commit the changes. but how should i do to update the live web server content (in /var/www)? should i in my ubuntu server use "svn checkout" and check it out to /var/www or should i use netbeans to check out to a local folder and then upload the files to /var/www with ftp or webdav (and which one of them should i use)? so i got a svn repo and lets say 4 programmers are working with it, checking out and commiting. how do i check what is happening in the repo, which one made which changes, and all the changes from day 1 to day 213? does netbeans/eclipse letting me see this kind of information or do i download another application for it? i should have one svn user for each programmer in the ubuntu server? is this accomplished by using "htpasswd" 4 times for 4 programmers? how do i couple all these users to same group so that i could modify file access specific for the svn group and all its members?

  Read the article

• How can I test a CRON job with PHP?

  - by alex

  This is the first time I've ever used a CRON. I'm using it to parse external data that is automatically FTP'd to a subdirectory on our site. I have created a controller and model which handles the data. I can access the URL fine in my browser and it works (however I will be restricting this soon). My problem is, how can I test if it's working? I've added this to my controller for a quick and dirty log $file = 'test.txt'; $contents = ''; if (file_exists($file)) { $contents = file_get_contents($file); } $contents .= date('m-d-Y') . ' --- ' . PHP_SAPI . "\n\n"; file_put_contents($file, $contents); But so far only got requests logged from myself from the browser, despite having my CRON running ever minute. 03-18-2010 --- cgi-fcgi 03-18-2010 --- cgi-fcgi I've set it up using cPanel with the command index.php properties/update/ the 2nd portion is what I use to access the page in my browser. So how can I test this is working properly, and have I stuffed anything up? Note: I'm using Kohana 3. Many thanks

  Read the article

• Can I copy an entire Magento application to a new server?

  - by Gapton

  I am quite new to Magento and I have a case where a client has a running ecommerce website built with Magento and is running on Amazon AWS EC2 server. If I can locate the web root (/var/www/) and download everything from it (say via FTP), I should be able to boot up my virtual machine with LAMP installed, put every single files in there and it should run, right? So I did just that, and Magento is giving me an error. I am guessing there are configs somewhere that needs to be changed in order to make it work, or even a lot of paths need to be changed etc. Also databases to be replicated. What are the typical things I should get right? Database is one, and the EC2 instance uses nginx while I use plain Apache, I guess that won't work straight out of the box, and I probably will have to install nginx and a lot of other stuffs. But basically, if I setup the environment right, it should run. Is my assumption correct? Thanks for answering!

  Read the article

• Team Build Reports as "Failed" Even Though All Targets Succeeded

  - by benjy

  Hi, I've written a custom MSBuild script to be used with Team Build, as I am storing PHP in TFS and of course it isn't compiled. My custom script calls the CoreGet target to get the latest version of the files, and the copies them, ZIPs, them, and FTPs the ZIP archive to a testing server. All of that is working fine. The problem I am having is that despite the build succeeding - see the output in BuildLog.txt - Done executing task "BuildStep". Done building target "FTP" in project "TFSBuild.proj". Done executing task "CallTarget". Done building target "EndToEndIteration" in project "TFSBuild.proj". Done Building Project "C:\Documents and Settings\tfsservice\Local Settings\Temp\Code\PHP\BuildType\TFSBuild.proj" (EndToEndIteration target(s)). Build succeeded. 0 Warning(s) 0 Error(s) the build still reports as having failed. The log from Visual Studio looks like so: Anyone know how I can make it report as having succeeded? Thanks very much in advance, Benjy P.S.: Please let me know if anyone would find having the whole build script helpful. Thanks!

  Read the article

• Building a CMS in PHP: Development tools

  - by TRiG

  I'm planning to build a CMS in PHP and MySQL, mainly for my own amusement and education. (Though who knows, I may come up with something useful and cool. Anything's possible.) I'll be asking questions about code architecture etc. later. For now, I'm more interested in development tools. So far, all my playing with code has been done on a web server, and I've edited over FTP. I was thinking it might be quicker to use a localhost. Also, that way, I could use version control (which I've never done before). So, A. How do I set up a localhost server with many subdomains on an Ubuntu 9.10 computer. Is XAMPP for Linux the way to go, or should I use a standard Apache distro? (Or another webserver altogether?) For that matter, is it possible to set up more than one webserver on the same computer, and to use them for different localhost subdomains? B. How do I set up a version control thingy covering all the code (which will be on several subdomains of localhost, and in a few shared folders)? I've read Joel Spolsky's HgInt tutorial, and it makes Mercurial look good. And simple, especially if you're working on your own. C. Should I continue to use gEdit to write HTML/CSS/JS/PHP, or is there a better free editor out there for these languages?

  Read the article

• Raising event in custom control.

  - by SeSSiZ

  Hi all, I'm writing a custom textblock control thats populate hyperlinks and raises event when clicked to hyperlink. I wrote this code but I got stucked. My code is : Imports System.Text.RegularExpressions Public Class CustomTextBlock Inherits TextBlock Public Event Klik As EventHandler(Of EventArgs) Public ReadOnly InlineCollectionProperty As DependencyProperty = DependencyProperty.Register("InlineCollection", GetType(String), GetType(CustomTextBlock), New PropertyMetadata(New PropertyChangedCallback(AddressOf CustomTextBlock.InlineChanged))) Private Shared Sub InlineChanged(ByVal sender As DependencyObject, ByVal e As DependencyPropertyChangedEventArgs) DirectCast(sender, CustomTextBlock).Inlines.Clear() Dim kelimeler = Split(e.NewValue, " ") For i = 0 To kelimeler.Length - 1 If Regex.Match(kelimeler(i), "(http|ftp|https):\/\/[\w\-_]+(\.[\w\-_]+)+([\w\-\.,@?^=%&amp;:/~\+#]*[\w\-\@?^=%&amp;/~\+#])?").Success Then Dim x = New Hyperlink(New Run(kelimeler(i))) x.AddHandler(Hyperlink.ClickEvent, New RoutedEventHandler(AddressOf t_Click)) x.ToolTip = kelimeler(i) x.Tag = kelimeler(i) DirectCast(sender, CustomTextBlock).Inlines.Add(x) If Not i = kelimeler.Length Then DirectCast(sender, CustomTextBlock).Inlines.Add(" ") Else DirectCast(sender, CustomTextBlock).Inlines.Add(kelimeler(i)) If Not i = kelimeler.Length Then DirectCast(sender, CustomTextBlock).Inlines.Add(" ") End If ''//Console.WriteLine(kelime(i).ToString.StartsWith("@")) Next kelimeler = Nothing End Sub Public Property InlineCollection As String Get Return DirectCast(GetValue(InlineCollectionProperty), String) End Get Set(ByVal value As String) SetValue(InlineCollectionProperty, value) End Set End Property Private Shared Sub t_Click(ByVal sender As Hyperlink, ByVal e As System.Windows.RoutedEventArgs) e.Handled = True RaiseEvent Klik(sender, EventArgs.Empty) End Sub End Class This code gives error at RaiseEvent Klik(sender, EventArgs.Empty) Error is : Cannot refer to an instance member of a class from within a shared method or shared member initializer without an expliticit instance of the class. Thanks for your answers, Alper

  Read the article

• JBoss Clustered Service that sends emails from txt file

  - by michael lucas

  I need a little push in the right direction. Here's my problem: I have to create an ultra-reliable service that sends email messages to clients whose addresses are stored in txt file on FTP server. Single txt file may contain unlimited number of entries. Most often the file contains about 300,000 entries. Service exposes interface with just two simple methods: TaskHandle sendEmails(String ftpFilePath); ProcessStatus checkProcessStatus(TaskHandle taskHandle); Method sendEmails() returns TaskHandle by which we can ask for ProcessStatus. For such a service to be reliable clustering is necessary. Processing single txt file might take a long time. Restarting one node in a cluster should have no impact on sending emails. We use JBoss AS 4.2.0 which comes with a nice HASingletonController that ensure one instance of service is running at given time. But once a fail-over happens, the second service should continue work from where the first one stopped. How can I share state between nodes in a cluster in such a way that leaves no possibility of sending some emails twice?

  Read the article

• FTPing a file to Mainframe using Java, Apache Common Net

  - by SKR

  I'm am trying to upload a file into mainframe server using FTP. My code is below FTPClient client = new FTPClient(); InputStream in = null; FileInputStream fis = null; try{ client.connect("10.10.23.23"); client.login("user1", "pass123"); client.setFileType(FTPClient.BINARY_FILE_TYPE); int reply ; reply = client.getReplyCode(); System.out.println("Reply Code:"+reply); if(FTPReply.isPositiveCompletion(reply)){ System.out.println("Positive reply"); String filename ="D:\\FILE.txt"; in = new FileInputStream(filename); client.storeFile("FILE.TXT", in); client.logout(); fis.close(); }else{ System.out.println("Negative reply"); } }catch(final Throwable t){ t.printStackTrace(); } The code gets struck in client.storeFile("FILE.TXT", in); I am unable to debug. Please suggest ways / solutions.

  Read the article

• Virus on site but can't find where

  - by Rob

  WARNING! THIS IS ABOUT A VIRUS ON MY SITE. IT APPEARS IT HAS BEEN THERE FOR SOMETIME AND I'VE HAD NO PROBLEMS. BUT PLEASE BE CAREFUL. READ EVERYTHING I SAY AND SEE IF YOU CAN HELP ME WITHOUT VISITING THE LINK. AVG PICKS UP ON IT AND BLOCKS IT, MCAFEE DOES NOT. Sorry about the warning, obviously i'm not here to get anyone infected or anything like that. Basically I run the website sortitoutsi dot net. Ages ago I got a virus on my computer, they got hold of my FTP passwords and added some lines of javascript to the top of my site. I removed them and believe it was fixed. However i'm using the "Web Developer" extension for Firefox and chose to view all javascript on my page and find there are various links to horrible urls such as: gittigidiyor-com.excite.co.jp.webmasterworld-com.eastmusicdirect.ru:8080/aboutus.org/aboutus.org/google.com/skycn.com/torrents.ru.php and gittigidiyor-com.excite.co.jp.webmasterworld-com.eastmusicdirect.ru:8080/index.php?jl= These terms do not appear anywhere. In the source code, in any of the javascript or the css. I also can't see that there are any rogue images that I don't recognise either. So i've no idea where this javascript is coming from. Can anyone suggest how I can find references to these links and remove them? I can see them both in the Web Developer firefox extension and in the net tab using Firebug. Any help would be greatly appreciated

  Read the article

• mvn deploy to AWS (ssh via distributionManagement)

  - by Dexter

  I am working on deploying the WAR file to AWS using Maven. I am planning to use 'mvn deploy' for the same which would ssh the war file to AWS. I am following http://maven.apache.org/plugins/maven-deploy-plugin/examples/deploy-ssh-external.html. This is my POM file <project> ... <distributionManagement> <repository> <id>ssh-aws</id> <url>scpexe://<ec2 instance>.compute-1.amazonaws.com</url> </repository> </distributionManagement> <build> <extensions> <!-- Enabling the use of FTP --> <extension> <groupId>org.apache.maven.wagon</groupId> <artifactId>wagon-ssh-external</artifactId> <version>1.0-beta-6</version> </extension> </extensions> </build> .. </project> This is my settings.xml <server> <id>ssh-aws</id> <username>aws-user</username> </server> The only issue is that I am unable to figure out the url in distributionManagement node of pom.xml. I am able to ssh in the AWS server by the following. ssh -i ~/pemfile/pemfile-key.pem aws-user@<ec2 instance>.compute-1.amazonaws.com But when I run mvn clean deploy, I receive this.. Exit code: 1 - Permission denied (publickey). -> [Help 1] Thanks in advance.

  Read the article

• Script to install and compile Python, Django, Virtualenv, Mercurial, Git, LessCSS, etc... on Dreamho

  - by tmslnz

  The Story After cleaning up my Dreamhost shared server's home folder from all the cruft accumulated over time, I decided to start afresh and compile/reinstall Python. All tutorials and snippets I found seemed overly simplistic, assuming (or ignoring) a bunch of dependencies needed by Python to compile all modules correctly. So, starting from http://andrew.io/weblog/2010/02/installing-python-2-6-virtualenv-and-virtualenvwrapper-on-dreamhost/ (so far the best guide I found), I decided to write a set-and-forget Bash script to automate this painful process, including along the way a bunch of other things I am planning to use. The Script I am hosting the script on http://bitbucket.org/tmslnz/python-dreamhost-batch/src/ The TODOs So far it runs fine, and does all it needs to do in about 900 seconds, giving me at the end of the process a fully functional Python / Mercurial / etc... setup without even needing to log out and back in. I though this might be of use for others too, but there are a few things that I think it's missing and I am not quite sure how to go for it, what's the best way to do it, or if this just doesn't make any sense at all. Check for errors and break Check for minor version bumps of the packages and give warnings Check for known dependencies Use arguments to install only some of the packages instead of commenting out lines Organise the code in a manner that's easy to update Optionally make the installers and compiling silent, with error logging to file failproof .bashrc modification to prevent breaking ssh logins and having to log back via FTP to fix it EDIT: The implied question is: can anyone, more bashful than me, offer general advice on the worthiness of the above points or highlight any problems they see with this approach? (see my answer to Ry4an's comment below) The Gist I am no UNIX or Bash or compiler expert, and this has been built iteratively, by trial and error. It is somehow going towards apt-get (well, 1% of it...), but since Dreamhost and others obviously cannot give root access on shared servers, this looks to me like a potentially very useful workaround; particularly so with some community work involved.

  Read the article

• Setup SVN/LAMP/Test Server/ on linux, where to start?

  - by John Isaacks

  I have a ubuntu machine I have setup. I installed apache2 and php5 on it. I can access the web server from other machines on the network via http://linux-server. I have subversion installed on it. I also have vsftpd installed on it so I can ftp to it from another computer on the network. Myself and other users currently use dreamweaver to checkin-checkout files directly from our live site to make changes. I want the connect to the linux server from pc. make the changes on the test server until ready and then pushed to the live site. I want to use subversion also into this workflow as well. but not sure what the best workflow is or how to set this up. I have no experience with linux, svn, or even using a test server, the checkin/out we are currently doing is the way I have always done it. I have hit many snags already just getting what I have setup because of my lack of knowledge in the area. Dreamweaver 5 has integration with subversion but I can't figure out how to get it to work. I want to setup and create the best workflow possible. I dont expect anyone to be able to give me an answer that will enlighten me enough to know everthing I need to know to do what I want to do (altough if possible that would be great) instead I am looking for maybe a knowledge path like answer. Like a general outline of what I need to do accompanied with links to learn how to do it. like read this book to learn linux, then read this article to learn svn, etc., then you should know what to do. I would be happy just getting it all setup, but I would like to know what I am actually doing while setting it up too.

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >