Search Results

Search found 18766 results on 751 pages for 'me again'.

Page 102/751 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Xen Bridge only working when IP Assigned

  - by m.sr

  Hey! Just had an (in my sense) obscure situation. I have a Xen Server with bridged networking. Everything works fine since month. A while ago i configuresd a second bridge. only some DomUs get an channel on this bridge - my Dom0 doesn't need to / should'nt use this bridge. So just 5 minutes ago while rebooting the xen host (because of an other problem with the UPS) i decided to removed the fixed ip from the the interface of the Dom0 which belongs to the second bridge. So after reboot i noticed that none of the interfaces on the second bridge is available. I couldn't find a problem. Everything was just like before the reboot, except the interface of the Dom0 had no IP address. After a while i tried to give the DomO interface of this bridge an IP again and ... BOOM ... everything is up and running again! WTF? Why is it important to have the interface of a bridge configured in the Dom0? Even when confiugured 'wrong' (complitely different netowkr settings as the network really hanging on the bridge) everythjing works fine ... I don't get it. Could please someone explain? Tnaks a lot!

  Read the article

• Cloned Win7: Keyboard doesn't work

  - by Marc

  I cloned my old Windows7 hard disk to a shiny new Seagate Momentus XT 500GB using the free EaseUs Disk Copy tool on my laptop. After the clone process I used the Windows 7 installation disc to start the automatic startup repair. This took maybe 15 minutes and then my cloned disk was able to start. Now the cloned disk boots until the login screen and then I can't do anything because my keyboard just doesn't work. I tried connecting an external USB keyboard but this didn't help. The mouse is working fine. Note that the keyboard works fine in BIOS and in the Windows startup options menu. I booted into safe mode and again the keyboard is not working at all. I also noticed that the letters "Press CTRL+ALT+Delete to login" are now shown in italic font but they used to be shown non-italic on the original disk. I have now replaced the clone with the original disk again and from here everything works fine. Doesn't anybody have an idea how I can get my keyboard back?

  Read the article

• File Server Resource Manager attempting to access quota.xml on System Reserved partition?

  - by pmellett

  I've got a new install of Server 2008 R2 that is designed to be our quota server for user home directories and shared areas. I installed FSRM and set up a few quotas to try out. They worked fine but at some point over the weekend it's stopped loading the FSRM console quota screen and gives the following error, with Event ID 8228: File Server Resource Manager was unable to access the following file or volume: '\\?\Volume{73649de6-7f04-11e1-a344-005056b10310}\System Volume Information\SRM\quota.xml'. This file or volume might be locked by another application right now, or you might need to give Local System access to it. I have removed and reinstalled the FSRM Role Service, cleared the \System Volume Information\SRM folder on each volume and am at the verge of just starting again. I'd rather not since then I have to go through and set up all my NTFS permissions again. Since it looks like the service is trying to access the System Reserved partition, which I assume won't have any files it could possibly need, how do I remove System Reserved partition as a volume to be monitored for the quota service? (I am not aware of configuring that to be the case originally though!)

  Read the article

• Under what conditions will sendmail try to immediately resend a message instead of waiting for the standard requeue interval?

  - by Mike B

  CentOS 5.8 | Sendmail 8.14.4 I used to think that if SendMail experienced a temporary (400-class) error during delivery, it would place the message in a deferred queue (e.g. /var/spool/mqueue) and retry an hour later. For the most part, that appears to be the case. But every now and then, I'll notice log entries like this (email/domains renamed to protect the innocent :-) ) : Dec 5 01:43:03 foobox-out sendmail [11078]: qBE3l7js123022: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=124588, relay=exbox.foo.com. [10.10.10.10], dsn=4.0.0, stat=Deferred: 421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel Dec 5 01:53:34 foobox-out sendmail [12763]: qBE3l7js123022: to=<[email protected]>, delay=00:10:31, xdelay=00:00:00, mailer=relay, pri=214588, relay=exbox.foo.com., dsn=4.0.0, stat=Deferred: 452 4.3.1 Insufficient system resources Dec 5 02:53:35 foobox-out sendmail [23255]: qBE3l7js123022: to=<[email protected]>, delay=01:10:32, xdelay=00:00:01, mailer=relay, pri=304588, relay=exbox.foo.com. [10.10.10.10], dsn=2.0.0, stat=Sent (<[email protected]> Queued mail for delivery) Why did Sendmail try again just 10 minutes after the first attempt and then wait another hour before trying again? If this is expected behavior, what scenarios will cause this faster requeue interval to occur?

  Read the article

• why Thinkpad T410s intermittent keyboard death?

  - by patrickmdnet

  I have a Thinkpad T410s running Windows 7 64-bit. I have had it for three months. It has the latest BIOS (1.41) and trackpad drivers. In the last week I have started to notice that the keyboard intermittently stops working. Specifically, keystrokes have no effect, including Fn-F12 (shutdown) and Ctrl-Alt-Del. The LED on the capslock key does not turn on or off. Whatever state the lighted keys (e.g. mute) were in remains. The trackpad and trackpoint work properly, and I can close apps and properly shut down the machine. When I attach a USB keyboard it is recognized, but no keys work. If I run the Lenovo keyboard test, all the keys register properly and the caps lock light works again. When I quit the test app, the caps lock light stops working. If I hit Fn-F12 while the keyboard test is running, it goes into hibernation. When the machine comes back from hibernation, once I exit the keyboard test I again cannot do any input on the keyboard. I'm pretty convinced there is a software or driver problem. I never saw this the first three months I had the laptop. I do not recall installing anything recently. I am sure I've received some Windows security updates. I tried using wired networking instead of wireless - no difference. There doesn't appear to be any inciting event; it usually happens when I am working over ssh. I switched from rxvt+ssh to Putty and the problem still occurs. Any ideas?

  Read the article

• Internet Troubles - PPPoE vs PPPoA?

  - by AkkA

  I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

  Read the article

• VNC Address Book - Window Invisible? Working as intended?

  - by user1445967

  I have VNC Server and VNC Viewer on the same PC with Windows 7 Ultimate x64. Is VNC Address Book supposed to have a main application window? I can't tell if this is bugged or working as intended. When I start VNC Address book, it creates an item in the task list and also an icon in the notification area. If I click the task list item once, nothing happens. If I click again, it disappears from the task list but remains in the notification area**. If I right-click the icon on the notification area, there is an option 'open address book', which if chosen, creates the item in the task list again, with the exact same behavior. If I left or right click on the address book icon, I have ways to connect to servers in the address book. However I have no way to add/remove/edit servers in the address book. **Note that this behavior is identical to that of an application with a main window where there is an option to 'minimize to system tray / notification area'. Only here, no main window is visible, ever. If fixing this problem is beyond the scope of this site, that's fine, but at this point I have no real way to tell if the program is malfunctioning on my pc or if it is far more minimalist than I expected. There appears to be no forum on realvnc.com where I can ask about this, perhaps this is to prevent me from getting any help unless I pay to register?

  Read the article

• RTorrent stops my torrents, crashes, and I have to manually re-add torrents and start them. How can I stop this cycle of doom?

  - by meder

  I cannot use transmission which is the best torrent client because it's banned from one of the trackers I use, so I am forced to use rtorrent. Normally I am all for command-line programs, however rtorrent ( 0.8.6/0.12.6 ) is simply frustrating. It is not intuitive, imo. I have 400 MB left on the HD and that's more than enough to dl this 200 MB avi. Rtorrent stops the download, though. It says [CLOSED] near the torrent. I do ctrl-r and that invokes the local hash check, and after that's done rtorrent simply dies ( wtf? ). Afterwards, it gives me rtorrent: TrackerManager::send_later() m_control->set() == DownloadInfo::STOPPED. So that leads me to open rtorrent again, then hit ENTER and /home/meder/file.avi.torrent, down arrow, and ctrl-S. I am looking for multiple things... How can I tell rtorrent to not worry about disk space? Again, it stops the torrent if my HD only has 400 mb when the torrent I'm dling is 200 mb ( there are no other torrents ). Why does ctrl-R fail hard? Why does it cause rtorrent to crash? If #2 is not solvable, can someone provide an easy way to add a torrent and start it, a more efficient method than typing the torrent name, hitting the down arrow, and ctrl-S?

  Read the article

• Printer spooler service stop running when sent print job

  - by Hanan N.

  Every time i am sending a print job to the printer, i am don't get any response from the printer, and at the printer job list at the status of the job, i see that there was an Error, but it don't give me any clue on what could be the problem. After some investigation i found that every time that i send the print job to the printer the printer spooler service stops to run, then after a second or two it start again (i think that this behavior is related to the printer spooler settings to rerun it self after it stops). Things that i have tried so far: Remove and Install again the Driver. After removing the driver, i have removed the unnecessary registry keys according to this article from Microsoft, these are: Rename all files and folders in: c:\windows\system32\spool\drivers\w32x86 Remove anything but Drivers Print and Processors: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x86 Remove anything in here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors but: BJ Language Monitor Local Port Microsoft Document Imaging Writer Monitor Microsoft Shared Fax Monitor Standard TCP/IP Port USB Monitor WSD Port Disconnect and Reconnect the Printer. Clean the computer from Viruses & Spywares. Currently i am stuck, i have no more things to try, if anybody know about any kind of solution please let me know about it. Since i am want to keep this post as general problem that relate to the printer spooler, and not just my particular problem, i didn't included inside the windows version & the printer model, they are (although i think that it isn't relate just for that particular model): Windows 7 32bit, HP Officejet 4500 G510g-m (connect to the computer via USB). Thanks.

  Read the article

• How do I connect to SSH without the password to be requested every time ? - Already follow some answers here but it doesn't work

  - by MEM

  MAC OS X Lion 10.7.3 1) On host, I've created an authorized_keys file inside .ssh folder, by doing: touch authorized_keys 2) I've copy my public ssh key into host .ssh folder by doing: scp ~/.ssh/mykey.pub [email protected]:/home/userhost/.ssh/mykey.pub 3) I've place it's contents inside authorized files by doing: cat mykey.pub >> authorized_keys 4) Then I've removed the mykey.pub file: rm mykey.pub 5) On my terminal, locally, inside my ~/.ssh folder I made: ssh-add mykey (notice that it is without the pub extension); 6) I've closed and opened again the terminal. When I first connect to this host, it has being added to the *known_hosts* file inside ~/.ssh; I've pico known_hosts and the hash is there. Still, every time I connect by doing: ssh [email protected] it requests a password ! What am I missing here ? UPDATE: I've done EVEN TWO MORE THINGS here: 7) Set your key to be the default identity - if it doesn't exist, create; touch ~/.ssh/config and place inside the following line: IdentityFile ~/.ssh/yourkeyname *id_rsa is normally your default key. You should switched to your key. This tells that the outgoing ssh connections should use this as a default identity.* 8) Add a bash process to your ssh-agent: ssh-agent bash ssh-add ~/.ssh/yourkeyname Lisinge answer helped but it's not definitive. If we restart our machine, the password gets prompted again!!! How can we debug this? What can we do here? How can we check where is this process failing ? UPDATE 2: If I use: ssh -v -i <keyfile> [email protected] I get among other things: OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 Warning: Identity file yourkeyname not accessible: No such file or directory. This message refers to what? The identify file is not accessible on the localhost, or it's not accessible on the remote host ? Please advice

  Read the article

• Is there any way to customize the Windows 7 taskbar auto-hide behavior? Delay activation? Timer?

  - by calbar

  I'm becoming increasingly frustrated with the way Windows 7 handles showing a hidden taskbar. It's incredibly over-eager to pop out and obscure what I'm really trying to interact with, requiring me to move the mouse away, wait for it to auto-hide again, then resume what I was doing but more deliberately. After closely examining the behavior, it appears that a hidden taskbar "peeks out" from the edge by 2 or 3 pixels, and slowly moving your mouse into this area activates it; you don't even need to touch the edge of the screen. I would love it if there was a way to customize or change this behavior. Ideally, the taskbar would only pop out if you are actively "pushing" the edge of the screen it is hidden on. So activation only occurs once you've reached the screens edge and continue to move the mouse past a customizable threshold. Alternatively, a simple activation delay would suffice as well. So only if the mouse remains in that 2-3 pixel area (a.k.a. on the taskbar) for greater than a customizable amount of time does it pop out again. This would only be a fraction of a second. Often times the cursor simply "careens" off the edge of the screen while trying to focus on something nearby. Anyway, if there are any registry settings or utilities that can achieve either of these effects, that would be great! Thanks for your help.

  Read the article

• Want to install GDB on Fedora 7 machine..

  - by RBA

  Hi, I want to install GDB GNU debugger for debugging C Programs, onto my fedora machine.. I installed the gzip file from gnu website, but it gives error during MAKE command.. I am doing all the steps correctly which reading from the readme file, and tutorial on internet. Please guide. Also i am trying to do from yum install gdb command and sudo apt-get install gdb, yum is not found in my system, i installed it, but now it is giving some unusual error, some file missing.. So no success with this.. sudo apt-get is working, but it is also giving some following errorss... [oracle@localhost Programs]$ sudo apt-get install gdb Password: Sorry, try again. Password: Sorry, try again. Password: oracle is not in the sudoers file. This incident will be reported. [oracle@localhost Programs]$ sudo apt-get install gdb I am in real nead of this gdb tool.. how to go about it.. Please share your experiences over this.. Thankx..

  Read the article

• Configure linux machine as bridge/switch and end device

  - by leemes

  At my home, I have two desktop PCs in two rooms. The router / DSL modem is in one of these rooms. Now I want to configure a home server (having 2 LAN ports, running 24/7) in the corridor between the two rooms, using only one LAN cable at each door. This gives me the following physical configuration: (door) (door) .----/-/----. .-----/-/----------._ FritzBox | | | .----´´ DSL Router PC1 Server | PC2 As just said, the server has 2 network interfaces and is running Ubuntu. What I need now is a network configuration which enables both the server and PC1 to connect to the router. I think the server needs to serve as a bridge or switch. Currently, all computers are configured having static IP addresses. If I'm understanding it correctly, a bridge / switch doesn't have its own IP address, but as the server needs to be configured as an own end device, it needs to have one. My first question is, do I have to configure both interfaces separately, giving both the same static IP address? My next question is, how do I bridge the two physical networks into one? I have basic understanding (but am always confused again and again) of bridges and switches, but I don't know how to configure it in software. I only know that it's possible to do so :) The third question is: Is it possible to configure this in a way that network packets from/to PC1 to/from the router only go through hardware or only consume low CPU in the server? Can you help me? Thanks in advance!

  Read the article

• Hard Drive that was used before not detected or accessible in Windows 7

  - by Anders

  Hello SU: My PC crashed for some unknown reason, and I am still working on what caused that. However, I pulled my main (windows) drive from my computer and hooked it up to my roommate's machine and was able to pull the data I needed off of it (i.e. the drive is good). I hook up his drives as they were, I had to turn off his machine and unplug his secondary drive to hook mine up, boot his machine and there is no second drive available in windows explorer. I opened Device Manager to see if for some reason it's drive letter got un-assigned, but there is nothing listed in there except his primary hard drive, his optical drive and one other optical drive which I believe is the virtual drive Daemon Tools made. The drive shows up in the BIOS, however after I restarted his machine again it sits on the "Entering setup....." screen at the load window. The only thing I can think of is that may have messed with stuff is I used this tutorial to create a bootable XP install on a USB drive to install XP on my machine (I am 99% certain that the optical drive in my PC is broken) and maybe it used the other hard drive's letter for the USB drive for some reason, which doesn't make much sense since it was recognized it as a different drive letter before I started the process. It is possible that it used the secondary hard drive's letter for it's work, but once again I am uncertain. Where should I go from here? He his bound to wake up within the next several hours and will probably flip a lid if I cannot get some sort of handle on this. Any and all help is greatly appreciated. PS: Anyone who helps me get this situated has a beer or two on me, as long as you are in the greater metro Detroit area, or don't mind traveling a bit!

  Read the article

• Western Digital HDD disappears and reappears in BIOS

  - by tbkn23

  I know many people asked about similar problems, but I have a very specific case where I can't understand what's going on... I have a 3TB Western Digital Caviar Green disk connected in my Desktop, that also has a seagate 1.5TB disk and 2 SSD drives (OCZ and Sandisk). After working fine for quite some time (probably more than a year), suddenly my Caviar Green drive disappeared from windows. I checked the BIOS, and it wasn't there either. I opened my PC, played with the connectors, power, etc, but nothing helped. Even tried switching connectors with those of the 1.5TB disk, and nothing changed, the 1.5TB seagate was there, but the 3TB WD was not. Ok, now for the strange part. I have another desktop at home, so I took out my 3TB drive, connected it there, and it worked fine! I copied the most important files out of it, and then made another attempt in the original desktop. Surprise! It now appeared in the BIOS and worked fine! I even ran the SMART test with the WD tools and it said everything was intact. It doesn't end here. After leaving it overnight in the original desktop, it disappeared again in the morning. I repeated the entire process, connecting it to the second desktop, and there it is again working fine. Now for my question... Whats going on? The disk seems to be appearing on/off in my original Desktop, while other drives there work fine. SMART test says the disk is fine. Any ideas? Is the disk defective and should be replaced? Or maybe there's a problem with the controller in the desktop? I'm using a Gigabyte GA-880GA-UD3H motherboard and tried connecting the drive to both bridges (SATA2 and SATA3 bridges). Thanks EDIT: Power options are set never to turn off hard drives:

  Read the article

• Weird problem with Visual C++ 2010 Express

  - by Robert Vella

  This has happened before on my Vista Premium installation, and now it's happening on my Windows 7 Home Premium installation. Basically everytime I install Visual Studio Express 2010, it works fine for a random amount of time but then suddenly starts to hide from my sight -- that's the best way I can explain it. VS does not crash, and from what I can tell it does not freeze either; It continues to work, I can even "minimize" and "maximize" it; I simply cannot see it nor can I interact with it any meaningful way. Also: After the "crash" there are no logs in: Root\Program Files (x86)\Microsoft Visual Studio 10.0\Microsoft Visual C++ 2010 Express - ENU. Nor any other files created at the time of the crash. There are no traces in the event viewer. The program seems to be functioning perfectly in the process manager. If I reinstall Visual C++, it works normally for a seemingly random period of time before going cookoo again. I am stumped. This has never happened to me before, with any other program. And yet I doubt it really is a problem with Visual C++; More like something general that seems to have picked on it for some reason. Still, after a clean install with a new OS, I'm kinda thinking there's something wrong here. Any help would be appreciated, altough I suspect that the answer to this question will make me feel embarassed. P.S. Not sure if it helps, but I think around the same time I started having problems (On both installations) with windows turning off the display when I leave the computer, and then seemingly crashing when it turns it on again -- in fact when I interact with it it seems to be responding to my commands without actually display anything.

  Read the article

• Word 2010 does not save as Word 2003 XML

  - by Peter

  I have a document which was created in Word 2010, but for use in a particular application, it needs to be saved in Word 2003 XML format. When I try the normal "Save as" via the File menu (choosing Word 2003 XML format to save as), Word 2010 thinks for a while, and then presents the "Save as" dialog to me again, suggesting that I save the document as .docx. Trying to get around this, I saved the document as .doc (i.e. Word 97-2003 document). This worked fine. But when I try to save this .doc file as Word 2003 XML, again Word 2010 thinks for a while, and then presents the "Save as" dialog, suggesting this time that I save the document as .doc. Oh, and I need to say that this only happens on a specific document - all others work fine. I know I should try a process of elimination and see what is causing the symptoms, but it would nice to have an answer "in principle". Is there perhaps a setting somewhere that I have enable? Does anyone know what's going on here?

  Read the article

• Win/Bios showing wrong RAM in Gateway Netbook?

  - by Ael

  I've seen similar problems, but this seems slightly unique, maybe... I have a Gateway LT21 netbook, Win7. I've upgraded RAM from 1gb to 2gb. It didn't work. So I updated to the latest Bios 1.25, then it worked. 2gb was recognized in the Bios and in Windows. Every was fine. Now today it seemed slow and, to my surprise, both the Bios and Win show only 1gb. :/ I've run memory diagnostic, no error. I entered bios and hit Exit and Save. Still 1gb. I took out the ram, put it back. Still 1gb. :/ CPU-Z shows 2048mb/2gb of RAM. Further testing: if i put in the old 1gb ram, turn on, then put in the new 2gb ram again, the Bios and Win show 2gb of ram. BUT, once restarted at all (even from Bios) it seems to go back to showing incorrect 1gb ram again. :// (There are very few options in the bios, none appear memory-related.) Any ideas?

  Read the article

• All network devices freezing when Airport Extreme Base Station is connected. Any ideas?

  - by Jon

  I've been troubleshooting this issue for a while, and through a series of events have it narrowed down to my airport extreme base station. I like this router, since I'm able to connect to IPV6 sites without any insane configuration (my alternate router is too old and doesn't support v6). My question is: Has anyone else had this issue, if so how is it resolved? If not, can you recommend a good IPv6 router? Here is how I came to the conclusion that it is the router: Devices: XBOX 360, HTC Incredible, Home-Built machine running FreeBSD, Home-Built machine running Ubuntu 10.04. 1.) Noticed freezing on Ubuntu Box. 2.) Noticed freezing on XBOX360 3.) Noticed freezing on HTC Incredible (only when connected to my network wirelessly). The above all happened at random times throughout the past few weeks. Over the last few days, I was playing XBOX and noticed that the XBOX and Ubuntu machines both froze. I picked up my phone, and it was also frozen. I reset all devices, power-cycled my router, and all was fine again. About two hours later, it happened again (I was playing Forza III, the XBOX froze; I went to the Ubuntu box and it was frozen; unfortunately, the HTC phone was not connected wirelessly, and the FreeBSD box was turned off). I can't even begin to imaging what a router could be doing to freeze devices with such differing hardware/software/OS, and I feel absurd for coming to this conclusion, but I have nothing else. I hooked up my archaic Netgear router, and have had no problems since. :(

  Read the article

• Daisychain external USB drive to WD My Book World Edition (Blue rings)

  - by d03boy

  I recently bought a new My Book Essential 1TB (WDBACW0010HBK-NESN) to daisychain to my older My Book World Edition 500GB (blue rings) with one of the version 01.xx.xx firmwares. At first when I connected the USB drive to the MBWE, it showed up in the System Summary section of the administration page without any issue. I was able to set up a new share on the new drive. The administration website moved very, very slow though. The administration pages became nearly unresponsive during this setup process. Once the share was set up I could access the new share but again, it was very slow, now through Windows Explorer. I looked around the internet and it seems that this is caused by the USB drive being formatted with NTFS. I tried reformatting it (again, as NTFS) just to double check and the same problem occurred. I then tried FAT32 but realized it would only support files of approximately 2GB and that is not acceptable for me. I decided to try a firmware upgrade on the MBWE to version 02.00.19. The firmware upgrade completed successfully but now the MBWE does not display the USB drive in the System Summary like it did with the earlier firmware version. The USB drive works perfectly fine when connected directly to my computer. Is there a way to solve this issue?

  Read the article

• Strange sound behavior

  - by caarlos0

  First of all, sorry for the tittle. English isn't my native language, and I can't find a word to describe the strange behavior I'm getting here. In the most simple explanation, is like sound keeps going down and up again... Think in a kid with that old radios that have a circled volume button. Think like these kid keeps "turning" the volume button. That is the behavior I'm getting here. At first, I believed that it was a pulseaudio issue, but, it isn't. I followed the wiki part I think that should be my problem, but it didn't work. After that, as I'm using XFCE, I didn't really need pulseaudio, so I removed it and stays with a clean alsa, hopping that will fix my problem. Sweet mistake. It really looks like a kid looking for trouble. I believed it worked, and, suddenly, here is the same issue again. BTW: I have a full-upgraded testing system (yeah, I upgraded to testing hopping for new pulseaudio version which fix the issue), no pulseaudio at all, just xfce, started with startxfce. What can I do to fix this? It's extremely annoying... sometimes I just want to throw my laptop in the wall because of this. Any extra info you need, please, tell me. Thanks in advance -- EDIT: My alsamixer is like this: And here is a video with the sound behavior.

  Read the article

• Delegating account unlock rights in AD

  - by ewall

  I'm trying to delegate the rights to unlock user accounts in our Active Directory domain. This should be easy, and I've done it before... but every time the user tries to unlock an account (using the LockoutStatus tool), he gets denied with the error "You do not have the necessary permissions to unlock this account." Here's what I've done: I created a domain local group and added the members who should have the rights. This was created over a week ago, so the users have logged out and in again. In ADUC, I've used the Delegate Rights wizard on the OU which contains our user accounts to grant permissions to Read lockoutTime and Writer lockoutTime to the group, per MSKB 279723 I have double-checked the permissions were applied correctly in ADSIEdit. I have forced replication between all domain controllers to ensure the permission changes were copied over. The user testing it has logged out and in again to ensure he has any changes applied to his account. ...That covers all the bases I can think of. Anything else I could be missing?

  Read the article

• How do I log back into a Windows Server 2003 guest OS after Hyper-V integration services installs and breaks my domain logins?

  - by Warren P

  After installing Hyper-V integration services, I appear to have a problem with logging in to my Windows Server 2003 virtual machine. Incorrect passwords and logins give the usual error message, but a correct login/password gives me this message: Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear, contact your system administrator for assistance. Nothing pleases me more than Microsoft telling me (the ersatz system administrator) to contact my system administrator for help, when I suspect that I'm hooped. The virtual machine has a valid network connection, and has decided to invalidate all my previous logins on this account, so I can't log in and remotely fix anything, and I can't remotely connect to it from outside either. This appears to be a catch 22. Unfortunately I don't know any non-domain local logins for this virtual machine, so I suspect I am basically hooped, or that I need ophcrack. is there any alternative to ophcrack? Second and related question; I used Disk2VHD to do the conversion, and I could log in fine several times, until after the Hyper-V integration services were installed, then suddenly this happens and I can't log in now - was there something I did wrong? I can't get networking working inside the VM BEFORE I install integration services, and at the very moment that integration services is being installed, I'm getting locked out like this. I probably should always know the local login of any machine I'm upgrading so I don't get stuck like this in the future.... great. Now I am reminded again of this.

  Read the article

• Liked Arch Linux - but I am still not sure if its the right distro for me...

  - by BlackAndGold

  As the title says... I used Arch Linux for a while and liked it a lot: leightweight, sleek, fast and well documented with a great community. However I had to format my hd and for the sake of being too lazy to reinstall arch, I used windows 7 exclusively for a while. Now I want to get back to linux again (still dual boot), mainly for web development purposes and using handy tools such as rsync ect. Again, I liked Arch, but there is too much tweeking, too much reading up and too much figuring out what to do as well es some bad suprises especially when you need them the least and when just quickly want to get some work done. I kind of would like to have a little more "out of the box" distro that is still fast and somewhat leighweight and of course reliable. I actually considered Ubuntu, which I am not too big of a fan of, but I will still give the minimal install a shot. However other distros seem interesting as well, such as crunchbang and mint debian ecpecially. My question, hoping this isn't too boring for many you, what is the right distro for me?

  Read the article

• Subversion error: Repository moved permanently to please relocate

  - by Bart S.

  I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. (it does now - see edit) My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this? -- Edit So I restarted apache (again) and tried it again and now it give me an error message, but it doesn't really help. Anyone have an idea what it means? [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] Could not fetch resource information. [403, #0] [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] (2)No such file or directory: The URI does not contain the name of a repository. [403, #190001] -- Edit 2 If I do svn info it doesn't give anything usefull: [root@eduro eduro.nl]# svn info http://svn.domain.com/repos/ Username: username Password for 'username': svn: Repository moved permanently to 'http://svn.domain.com/repos/'; please relocate I also tried doing a local checkout (svn checkout file:///var/www/svn/repos/reposname) and that works fine (also adding / commiting works fine). So it seems is has something to do with apache. Some other information: I'm running CentOs 5.3 Plesk 9.3 Subversion, version 1.6.9 (r901367) -- Edit 3 I tried moving the repositories, but it didn't make any difference. selinux is disabled so that isn't it either. -- Edit 4 Really? Nobody :(?

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >