Search Results

Search found 2668 results on 107 pages for 'tom tap'.

Page 102/107 | < Previous Page | 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Computer freezes +/- 30 seconds, suspicion on SSD

  - by Robert vE

  My computer freezes for about 30 seconds, this happens occasionally. When it happens I can still move the mouse, sometimes even alternate between tabs in google chrome. If I try to open windows explorer nothing happens. Also chrome rapports "waiting for cache". It also happens in starcraft II, during which the sounds loops. I have made a Trace as this topic describes: How do I troubleshoot a Windows 7 freeze or slowness? Trace: https://docs.google.com/open?id=0B_VkKdh535p6NklhSDdBLURUMnc I have looked at it, but I couldn't figure it out. My system specs are: AMD Athlon X4 651 Asus Ati HD6670 ADATA SSD sp900 Asus f1a55 mainboard 4 GB crucial 1333 ram 500 watt atx ps I'm running Windows 7, fully updated. Any help is much appreciated. Update: I tried something before your reply that may have helped the problem. I don't know for sure if it has, it's too soon to tell. A bit of history first. I had problems installing win7 on my ssd from the start. In IDE mode it worked, but I had the same problems as above. AHCI was a total fail, with it on before install as well as turning it on after install (including tweaking register). I didn't bother installing the AMD chipset/AHCI as it was reported to have no TRIM function and thus make problems worse. Eventually I did install the AMD SMbus driver as the stability issues were driving me crazy. It worked, no more issues, until I installed some extra drivers and software. Audio/LAN/ASUS suite, I don’t see the relation, but somehow it screwed up my system again. As a last effort I posted here on this site. After which the thought occurred to me turn on AHCI again as by now I had all necessary drivers installed anyway. (plus all windows updates downloaded/installed in the meantime) I did and stability didn’t seem great the first few reboots, but eventually everything seemed to work great. I tried to play starcraft II – an almost guaranteed freeze before – and I had no problems. I’m basically crossing my fingers and hope the problem is gone for good. I still think it has something to do with my SSD. In my research into the problem I noticed a lot of these issues with sandforce 2281 firmware, the exact same firmware I have. People reported the same problem that I had, freezes. Additionally they reported that during a freeze the hdd light stayed on, I noticed after I read this that this happened with my computer as well. None of this is conclusive evidence that my SSD is really to fault, but it is suspicious. And why turning on AHCI would fix it I don’t know. Thank you Tom for taking a look, if the problem returns I will certainly do what you advised.

  Read the article

• Program crash on deque from queue

  - by SwedishGit

  My first question asked here, so please excuse if I fail to include something... I'm working on a homework project, which basically consists of creating a "Jukebox" (importing/exporting albums from txt files, creating and "playing" a playlist, etc.). I've become stuck on one point: When "playing" the playlist, which consists of a self-made Queue, a copy of it is made from which songs are dequeued and printed out with a time delay. This appears to run fine on the first run through the program, but if the "play" option is chosen again (with the same playlist, created from a different menu option), it crashes before managing to print the first song. It also crashes if creating a new playlist, but then it manages to print some songs (seem to depend on the number of songs in the first/new playlists...) before crashing. With printouts I've been able to track the crashing down to being on the "item = n-data" call in the deque function... but can't get my head around why this would crash. Below is the code I think should be relevant... let me know if there are other parts that would help if I include. Edit: The Debug Error shown on crash is: R6010 abort() has been called The method to play from the playlist: void Jukebox::playList() { if(songList.getNodes() > 0) { Queue tmpList(songList); Song tmpSong; while(tmpList.deque(tmpSong)) { clock_t temp; temp = clock () + 2 * CLOCKS_PER_SEC ; while (clock() < temp) {} } } else cout << "There are no songs in the playlist!" << endl; } Queue: // Queue.h - Projekt-uppgift // Håkan Sjölin 2014-05-31 //----------------------------------------------------------------------------- #ifndef queue_h #define queue_h #include "Song.h" using namespace std; typedef Song Item; class Node; class Queue { private: Node *first; Node *last; int nodes; public: Queue():first(nullptr),last(nullptr),nodes(0){}; ~Queue(); void enque(Item item); bool deque(Item &item); int getNodes() const { return nodes; } void empty(); }; #endif // Queue.cpp - Projekt-uppgift // Håkan Sjölin 2014-05-31 //----------------------------------------------------------------------------- #include "queue.h" using namespace std; class Node { public: Node *next; Item data; Node (Node *n, Item newData) : next(n), data(newData) {} }; //------------------------------------------------------------------------------ // Funktionsdefinitioner för klassen Queue //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ // Destruktor //------------------------------------------------------------------------------ Queue::~Queue() { while(first!=0) { Node *tmp = first; first = first->next; delete tmp; } } //------------------------------------------------------------------------------ // Lägg till data sist i kön //------------------------------------------------------------------------------ void Queue::enque(Item item) { Node *pNew = new Node(0,item); if(getNodes() < 1) first = pNew; else last->next = pNew; last = pNew; nodes++; } //------------------------------------------------------------------------------ // Ta bort data först i kön //------------------------------------------------------------------------------ bool Queue::deque(Item &item) { if(getNodes() < 1) return false; //cout << "deque: test2" << endl; Node *n = first; //cout << "deque: test3" << endl; //cout << "item = " << item << endl; //cout << "first = " << first << endl; //cout << "n->data = " << n->data << endl; item = n->data; //cout << "deque: test4" << endl; first = first->next; //delete n; nodes--; if(getNodes() < 1) // Kön BLEV tom last = nullptr; return true; } //------------------------------------------------------------------------------ // Töm kön //------------------------------------------------------------------------------ void Queue::empty() { while (getNodes() > 0) { Item item; deque(item); } } //------------------------------------------------------------------------------ Song: // Song.h - Projekt-uppgift // Håkan Sjölin 2014-05-15 //----------------------------------------------------------------------------- #ifndef song_h #define song_h #include "Time.h" #include <string> #include <iostream> using namespace std; class Song { private: string title; string artist; Time length; public: Song(); Song(string pTitle, string pArtist, Time pLength); // Setfunktioner void setTitle(string pTitle); void setArtist(string pArtist); void setLength(Time pLength); // Getfunktioner string getTitle() const { return title;} string getArtist() const { return artist;} Time getLength() const { return length;} }; ostream &operator<<(ostream &os, const Song &song); istream &operator>>(istream &is, Song &song); #endif // Song.cpp - Projekt-uppgift // Håkan Sjölin 2014-05-15 //----------------------------------------------------------------------------- #include "Song.h" #include "Constants.h" #include <iostream> //------------------------------------------------------------------------------ // Definiering av Songs medlemsfunktioner //------------------------------------------------------------------------------ // Fövald konstruktor //------------------------------------------------------------------------------ Song::Song() { } //------------------------------------------------------------------------------ // Initieringskonstruktor //------------------------------------------------------------------------------ Song::Song(string pTitle, string pArtist, Time pLength) { title = pTitle; artist = pArtist; length = pLength; } //------------------------------------------------------------------------------ // Setfunktioner //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ // setTitle // Ange titel //------------------------------------------------------------------------------ void Song::setTitle(string pTitle) { title = pTitle; } //------------------------------------------------------------------------------ // setArtist // Ange artist //------------------------------------------------------------------------------ void Song::setArtist(string pArtist) { artist = pArtist; } //------------------------------------------------------------------------------ // setTitle // Ange titel //------------------------------------------------------------------------------ void Song::setLength(Time pLength) { length = pLength; } //--------------------------------------------------------------------------- // Överlagring av utskriftsoperatorn //--------------------------------------------------------------------------- ostream &operator<<(ostream &os, const Song &song) { os << song.getTitle() << DELIM << song.getArtist() << DELIM << song.getLength(); return os; } //--------------------------------------------------------------------------- // Överlagring av inmatningsoperatorn //--------------------------------------------------------------------------- istream &operator>>(istream &is, Song &song) { string tmpString; Time tmpLength; getline(is, tmpString, DELIM); song.setTitle(tmpString); getline(is, tmpString, DELIM); song.setArtist(tmpString); is >> tmpLength; is.get(); song.setLength(tmpLength); return is; } //--------------------------------------------------------------------------- Album: // Album.h - Projekt-uppgift // Håkan Sjölin 2014-05-17 //----------------------------------------------------------------------------- #ifndef album_h #define album_h #include "Song.h" #include <string> #include <vector> #include <iostream> using namespace std; class Album { private: string name; vector<Song> songs; public: Album(); Album(string pNameTitle, vector<Song> pSongs); // Setfunktioner void setName(string pName); // Getfunktioner string getName() const { return name;} vector<Song> getSongs() const { return songs;} int getNumberOfSongs() const { return songs.size();} Time getTotalTime() const; void addSong(Song pSong); bool operator<(const Album &album) const; }; ostream &operator<<(ostream &os, const Album &album); istream &operator>>(istream &is, Album &album); #endif // Album.cpp - Projekt-uppgift // Håkan Sjölin 2014-05-17 //----------------------------------------------------------------------------- #include "Album.h" #include "Constants.h" #include <iostream> #include <string> //------------------------------------------------------------------------------ // Definiering av Albums medlemsfunktioner //------------------------------------------------------------------------------ // Fövald konstruktor //------------------------------------------------------------------------------ Album::Album() { } //------------------------------------------------------------------------------ // Initieringskonstruktor //------------------------------------------------------------------------------ Album::Album(string pName, vector<Song> pSongs) { name = pName; songs = pSongs; } //------------------------------------------------------------------------------ // Setfunktioner //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ // setName // Ange namn //------------------------------------------------------------------------------ void Album::setName(string pName) { name = pName; } //------------------------------------------------------------------------------ // addSong // Lägg till song //------------------------------------------------------------------------------ void Album::addSong(Song pSong) { songs.push_back(pSong); } //------------------------------------------------------------------------------ // getTotalTime // Returnera total speltid //------------------------------------------------------------------------------ Time Album::getTotalTime() const { Time tTime(0,0,0); for(Song s : songs) { tTime = tTime + s.getLength(); } return tTime; } //--------------------------------------------------------------------------- // Mindre än //--------------------------------------------------------------------------- bool Album::operator<(const Album &album) const { return getTotalTime() < album.getTotalTime(); } //--------------------------------------------------------------------------- // Överlagring av utskriftsoperatorn //--------------------------------------------------------------------------- ostream &operator<<(ostream &os, const Album &album) { os << album.getName() << endl; os << album.getNumberOfSongs() << endl; for (size_t i = 0; i < album.getSongs().size(); i++) os << album.getSongs().at(i) << endl; return os; } //--------------------------------------------------------------------------- // Överlagring av inmatningsoperatorn //--------------------------------------------------------------------------- istream &operator>>(istream &is, Album &album) { string tmpString; int tmpNumberOfSongs; Song tmpSong; getline(is, tmpString); album.setName(tmpString); is >> tmpNumberOfSongs; is.get(); for (int i = 0; i < tmpNumberOfSongs; i++) { is >> tmpSong; album.addSong(tmpSong); } return is; } //--------------------------------------------------------------------------- Time: // Time.h - Projekt-uppgift // Håkan Sjölin 2014-05-15 //----------------------------------------------------------------------------- #ifndef time_h #define time_h #include <iostream> using namespace std; class Time { private: int hours; int minutes; int seconds; public: Time(); Time(int pHour, int pMinute, int pSecond); // Setfunktioner void setHour(int pHour); void setMinute(int pMinute); void setSecond(int pSecond); // Getfunktioner int getHour() const { return hours;} int getMinute() const { return minutes;} int getSecond() const { return seconds;} Time operator+(const Time &time) const; bool operator==(const Time &time) const; bool operator<(const Time &time) const; }; ostream &operator<<(ostream &os, const Time &time); istream &operator>>(istream &is, Time &Time); #endif // Time.cpp - Projekt-uppgift // Håkan Sjölin 2014-05-15 //----------------------------------------------------------------------------- #include "Time.h" #include <iostream> //------------------------------------------------------------------------------ // Definiering av Times medlemsfunktioner //------------------------------------------------------------------------------ // Fövald konstruktor //------------------------------------------------------------------------------ Time::Time() { } //------------------------------------------------------------------------------ // Initieringskonstruktor //------------------------------------------------------------------------------ Time::Time(int pHour, int pMinute, int pSecond) { setHour(pHour); setMinute(pMinute); setSecond(pSecond); } //------------------------------------------------------------------------------ // Setfunktioner //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ // setHour // Ange timme //------------------------------------------------------------------------------ void Time::setHour(int pHour) { if(pHour>-1) hours = pHour; else hours = 0; } //------------------------------------------------------------------------------ // setMinute // Ange minut //------------------------------------------------------------------------------ void Time::setMinute(int pMinute) { if(pMinute < 60 && pMinute > -1) { minutes = pMinute; } else minutes = 0; } //------------------------------------------------------------------------------ // setSecond // Ange sekund //------------------------------------------------------------------------------ void Time::setSecond(int pSecond) { if(pSecond < 60 && pSecond > -1) { seconds = pSecond; } else seconds = 0; } //--------------------------------------------------------------------------- // Överlagring av utskriftsoperatorn //--------------------------------------------------------------------------- ostream &operator<<(ostream &os, const Time &time) { os << time.getHour()*3600+time.getMinute()*60+time.getSecond(); return os; } //--------------------------------------------------------------------------- // Överlagring av inmatningsoperatorn //--------------------------------------------------------------------------- istream &operator>>(istream &is, Time &time) { int tmp; is >> tmp; time.setSecond(tmp%60); time.setMinute((tmp/60)%60); time.setHour(tmp/3600); return is; } //--------------------------------------------------------------------------- // Likhet //-------------------------------------------------------------------------- bool Time::operator==(const Time &time) const { return hours == time.getHour() && minutes == time.getMinute() && seconds == time.getSecond(); } //--------------------------------------------------------------------------- // Mindre än //--------------------------------------------------------------------------- bool Time::operator<(const Time &time) const { if(hours == time.getHour()) { if(minutes == time.getMinute()) { return seconds < time.getSecond(); } else { return minutes < time.getMinute(); } } else { return hours < time.getHour(); } } //--------------------------------------------------------------------------- // Addition //--------------------------------------------------------------------------- Time Time::operator+(const Time &time) const { return Time(hours+time.getHour() + (minutes+time.getMinute() + (seconds+time.getSecond())/60)/60, (minutes+time.getMinute() + (seconds+time.getSecond())/60)%60, (seconds+time.getSecond())%60); } //--------------------------------------------------------------------------- Thanks in advance for any help! Edit2: Didn't think of including the more detailed crash info (as it didn't show in the crash pop-up, so to say). Anyway, here it is: Output: 'Jukebox.exe' (Win32): Loaded 'C:\Users\Håkan\Documents\Studier - IT\Objektbaserad programmering i C++\Inlämningsuppgifter\Projekt\Jukebox\Debug\Jukebox.exe'. Symbols loaded. 'Jukebox.exe' (Win32): Loaded 'C:\Windows\SysWOW64\ntdll.dll'. Cannot find or open the PDB file. 'Jukebox.exe' (Win32): Loaded 'C:\Windows\SysWOW64\kernel32.dll'. Cannot find or open the PDB file. 'Jukebox.exe' (Win32): Loaded 'C:\Windows\SysWOW64\KernelBase.dll'. Cannot find or open the PDB file. 'Jukebox.exe' (Win32): Loaded 'C:\Windows\SysWOW64\msvcp110d.dll'. Symbols loaded. 'Jukebox.exe' (Win32): Loaded 'C:\Windows\SysWOW64\msvcr110d.dll'. Symbols loaded. The thread 0xe50 has exited with code 0 (0x0). Unhandled exception at 0x0083630C in Jukebox.exe: 0xC0000005: Access violation reading location 0x0000003C. Call stack: > Jukebox.exe!Song::getLength() Line 27 C++ Jukebox.exe!operator<<(std::basic_ostream<char,std::char_traits<char> > & os, const Song & song) Line 59 C++ Jukebox.exe!Queue::deque(Song & item) Line 55 C++ Jukebox.exe!Jukebox::playList() Line 493 C++ Jukebox.exe!Jukebox::play() Line 385 C++ Jukebox.exe!Jukebox::run() Line 536 C++ Jukebox.exe!main() Line 547 C++ Jukebox.exe!__tmainCRTStartup() Line 536 C Jukebox.exe!mainCRTStartup() Line 377 C kernel32.dll!754d86e3() Unknown [Frames below may be incorrect and/or missing, no symbols loaded for kernel32.dll] ntdll.dll!7748bf39() Unknown ntdll.dll!7748bf0c() Unknown

  Read the article

• Oracle Announces New Oracle Exastack Program for ISV Partners

  - by pfolgado

  Oracle Exastack Program Enables ISV Partners to Leverage a Scalable, Integrated Infrastructure to Deliver Their Applications Tuned and Optimized for High-Performance News Facts Enabling Independent Software Vendors (ISVs) and other members of Oracle Partner Network (OPN) to rapidly build and deliver faster, more reliable applications to end customers, Oracle today introduced Oracle Exastack Ready, available now, and Oracle Exastack Optimized, available in fall 2011 through OPN. The Oracle Exastack Program focuses on helping ISVs run their solutions on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud -- integrated systems in which the software and hardware are engineered to work together. These products provide partners with a lower cost and high performance infrastructure for database and application workloads across on-premise and cloud based environments. Leveraging the new Oracle Exastack Program in which applications can qualify as Oracle Exastack Ready or Oracle Exastack Optimized, partners can use available OPN resources to optimize their applications to run faster and more reliably -- providing increased performance to their end users. By deploying their applications on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud, ISVs can reduce the cost, time and support complexities typically associated with building and maintaining a disparate application infrastructure -- enabling them to focus more on their core competencies, accelerating innovation and delivering superior value to customers. After qualifying their applications as Oracle Exastack Ready, partners can note to customers that their applications run on and support Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud component products including Oracle Solaris, Oracle Linux, Oracle Database and Oracle WebLogic Server. Customers can be confident when choosing a partner's Oracle Exastack Optimized application, knowing it has been tuned by the OPN member on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud with a goal of delivering optimum speed, scalability and reliability. Partners participating in the Oracle Exastack Program can also leverage their Oracle Exastack Ready and Oracle Exastack Optimized applications to advance to Platinum or Diamond level in OPN. Oracle Exastack Programs Provide ISVs a Reliable, High-Performance Application Infrastructure With the Oracle Exastack Program ISVs have several options to qualify and tune their applications with Oracle Exastack, including: Oracle Exastack Ready: Oracle Exastack Ready provides qualifying partners with specific branding and promotional benefits based on their adoption of Oracle products. If a partner application supports the latest major release of one of these products, the partner may use the corresponding logo with their product marketing materials: Oracle Solaris Ready, Oracle Linux Ready, Oracle Database Ready, and Oracle WebLogic Ready. Oracle Exastack Ready is available to OPN members at the Gold level or above. Additionally, OPN members participating in the program can leverage their Oracle Exastack Ready applications toward advancement to the Platinum or Diamond levels in the OPN Specialized program and toward achieving Oracle Exastack Optimized status. Oracle Exastack Optimized: When available, for OPN members at the Gold level or above, Oracle Exastack Optimized will provide direct access to Oracle technical resources and dedicated Oracle Exastack lab environments so OPN members can test and tune their applications to deliver optimal performance and scalability on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud. Oracle Exastack Optimized will provide OPN members with specific branding and promotional benefits including the use of the Oracle Exastack Optimized logo. OPN members participating in the program will also be able to leverage their Oracle Exastack Optimized applications toward advancement to Platinum or Diamond level in the OPN Specialized program. Oracle Exastack Labs and ISV Enablement: Dedicated Oracle Exastack lab environments and related technical enablement resources (including Guided Learning Paths and Boot Camps) will be available through OPN for OPN members to further their knowledge of Oracle Exastack offerings, and qualify their applications for Oracle Exastack Optimized or Oracle Exastack Ready. Oracle Exastack labs will be available to qualifying OPN members at the Gold level or above. Partners are eligible to participate in the Oracle Exastack Ready program immediately, which will help them meet the requirements to attain Oracle Exastack Optimized status in the future. Guidelines for Oracle Exastack Optimized, as well as Oracle Exastack Labs will be available in fall 2011. Supporting Quotes "In order to effectively differentiate their software applications in the marketplace, ISVs need to rapidly deliver new capabilities and performance improvements," said Judson Althoff, Oracle senior vice president of Worldwide Alliances and Channels and Embedded Sales. "With Oracle Exastack, ISVs have the ability to optimize and deploy their applications with a complete, integrated and cloud-ready infrastructure that will help them accelerate innovation, unlock new features and functionality, and deliver superior value to customers." "We view performance as absolutely critical and a key differentiator," said Tom Stock, SVP of Product Management, GoldenSource. "As a leading provider of enterprise data management solutions for securities and investment management firms, with Oracle Exadata Database Machine, we see an opportunity to notably improve data processing performance -- providing high quality 'golden copy' data in a reduced timeframe. Achieving Oracle Exastack Optimized status will be a stamp of approval that our solution will provide the performance and scalability that our customers demand." "As a leading provider of Revenue Intelligence solutions for telecommunications, media and entertainment service providers, our customers continually demand more readily accessible, enriched and pre-analyzed information to minimize their financial risks and maximize their margins," said Alon Aginsky, President and CEO of cVidya Networks. "Oracle Exastack enables our solutions to deliver the power, infrastructure, and innovation required to transform our customers' business operations and stay ahead of the game." Supporting Resources Oracle PartnerNetwork (OPN) Oracle Exastack Oracle Exastack Datasheet Judson Althoff blog Connect with the Oracle Partner community at OPN on Facebook, OPN on LinkedIn, OPN on YouTube, or OPN on Twitter

  Read the article

• Book Review Charlene Li's New Book: Open Leadership

  - by david.talamelli

  A few weeks ago, I was surprised when I looked in our mail box. I had received an Advance Copy of Charlene Li's new book titled "Open Leadership: How Social Technology Can Transform the Way You Lead". Charlene sent a tweet a while back asking anyone interested in receiving the book to submit their details. I sent off my details and didn't think I would hear anything back, so it was a pleasant surprise. With that I almost feel bad that it has taken me 3 weeks to read her book. It took this long mainly because it has been hard to fit in some quality reading time for myself with work, the kids, volunteering, etc..... I am happy to report I have finished her book and wanted to run through my initial thoughts with you. I first came across Charlene Li after reading her book "Groundswell" a few years ago, her latest book "Open Leadership" is a follow on from Groundswell and to me it seems like a natural progression from the question "Ok the business landscape is changing, what do we do now?" For me these two books have a different writing style to them. Groundswell from memory spoke about broad social media concepts and adoption and alerted us to some of the changes taking place in the SM landscape. Open Leadership seems to be focussed on taking those broad concepts and finding ways to implement them into your environment. That is breaking broad concepts down into individual action items that can be measured and analysed. As the business world changes Leaders must change their approach and let go of control to more control. One of the things I love reading about is seeing real life examples of how people and organisations are making these things happen. In this book Charlene has collected some great collateral and case studies from companies such as Cisco, Best Buy, The Red Cross and The State Bank of India (as a side-note, I wish now that I submitted my input for the Leaders I work with here at Oracle - there are some great examples here of people who empower their staff). As society becomes more adept at using social media it is inevitable that Leaders must become open with their employees, clients and partners. From the book some of the key points I took away are (I actually took away a lot more from this book, this is just an overview) : 1) Organisations should encourage risk taking. Without being a "hacker", how can we improve ourselves, our processes, our business, etc... The old saying you only fail by not trying applies here. If Leaders create a culture where people are afraid to stick their neck out - how will you innovate? 2) Leaders need to lead by example - if you want to promote an open and transparent business, a Leader needs to exemplify the traits they would like to see out of their employees. 3) The definition of a Leader is changing, open leadership is about being a catalyst to change that uses networks to spread a vision as opposed to traditional leadership that is viewed as a role. 4) There is a cultural and business shift taking place. Information is more wide-spread and is being disseminated faster than any other time in the past. Leaders who are open and transparent will thrive in this new business environment. 5) Leadership is not defined by a title - it is defined by a person's actions. Also anyone can be a Leader or has Leadership potential in them- it is a matter of drawing that out of people. I found this book useful and I also found myself looking at my own actions and the actions of others around me (including my management) to see how open and transparent I am in my work. For me I am glad I read this book as it validated my own thoughts of the changes we are seeing take place. This book has certainly given me some new ideas and helped me push my own boundaries of what I can do. The book has a number of action plans at the end of some of the chapters such as "Conducting you Openness Audit" that I think have helped me take thoughts and ideas and turn them into concrete action items. I have included a link to the introduction of the book here if anyone wants to have a read of it. If anyone else has read this book, it would be great to hear your thoughts/comments/review. Leave your comments below. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

  Read the article

• RSS Feeds currently on Simple-Talk

  - by Andrew Clarke

  There are a number of news-feeds for the Simple-Talk site, but for some reason they are well hidden. Whilst we set about reorganizing them, I thought it would be a good idea to list some of the more important ones. The most important one for almost all purposes is the Homepage RSS feed which represents the blogs and articles that are placed on the homepage. Main Site Feed representing the Homepage ..which is good for most purposes but won't always have all the blogs, or maybe it will occasionally miss an article. If you aren't interested in all the content, you can just use the RSS feeds that are more relevant to your interests. (We'll be increasing these categories soon) The newsfeed for SQL articles The .NET section newsfeed The newsfeed for Red Gate books The newsfeed for Opinion articles The SysAdmin section newsfeed if you want to get a more refined feed, then you can pick and choose from these feeds for each category so as to make up your custom news-feed in the SQL section, SQL Training Learn SQL Server Database Administration TSQL Programming SQL Server Performance Backup and Recovery SQL Tools SSIS SSRS (Reporting Services) in .NET there are... ASP.NET Windows Forms .NET Framework ,NET Performance Visual Studio .NET tools in Sysadmin there are Exchange General Virtualisation Unified Messaging Powershell in opinion, there is... Geek of the Week Opinion Pieces in Books, there is .NET Books SQL Books SysAdmin Books And all the blogs have got feeds. So although you can get all the blogs from here.. Main Blog Feed          You can get individual RSS feeds.. AdamRG's Blog       Alex.Davies's Blog       AliceE's Blog       Andrew Clarke's Blog       Andrew Hunter's Blog       Bart Read's Blog       Ben Adderson's Blog       BobCram's Blog       bradmcgehee's Blog       Brian Donahue's Blog       Charles Brown's Blog       Chris Massey's Blog       CliveT's Blog       Damon's Blog       David Atkinson's Blog       David Connell's Blog       Dr Dionysus's Blog       drsql's Blog       FatherJack's Blog       Flibble's Blog       Gareth Marlow's Blog       Helen Joyce's Blog       James's Blog       Jason Crease's Blog       John Magnabosco's Blog       Laila's Blog       Lionel's Blog       Matt Lee's Blog       mikef's Blog       Neil Davidson's Blog       Nigel Morse's Blog       Phil Factor's Blog       red@work's Blog       reka.burmeister's Blog       Richard Mitchell's Blog       RobbieT's Blog       RobertChipperfield's Blog       Rodney's Blog       Roger Hart's Blog       Simon Cooper's Blog       Simon Galbraith's Blog       TheFutureOfMonitoring's Blog       Tim Ford's Blog       Tom Crossman's Blog       Tony Davis's Blog       As well as these blogs, you also have the forums.... SQL Server for Beginners Forum     Programming SQL Server Forum    Administering SQL Server Forum    .NET framework Forum    .Windows Forms Forum   ASP.NET Forum   ADO.NET Forum 

  Read the article

• 2010 Collaboration Summit Impressions

  - by Elena Zannoni

  It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

  Read the article

• JPA - insert and retrieve clob and blob types

  - by pachunoori.vinay.kumar(at)oracle.com

  This article describes about the JPA feature for handling clob and blob data types.You will learn the following in this article. @Lob annotation Client code to insert and retrieve the clob/blob types End to End ADFaces application to retrieve the image from database table and display it in web page. Use Case Description Persisting and reading the image from database using JPA clob/blob type. @Lob annotation By default, TopLink JPA assumes that all persistent data can be represented as typical database data types. Use the @Lob annotation with a basic mapping to specify that a persistent property or field should be persisted as a large object to a database-supported large object type. A Lob may be either a binary or character type. TopLink JPA infers the Lob type from the type of the persistent field or property. For string and character-based types, the default is Clob. In all other cases, the default is Blob. Example Below code shows how to use this annotation to specify that persistent field picture should be persisted as a Blob. public class Person implements Serializable {    @Id    @Column(nullable = false, length = 20)    private String name;    @Column(nullable = false)    @Lob    private byte[] picture;    @Column(nullable = false, length = 20) } Client code to insert and retrieve the clob/blob types Reading a image file and inserting to Database table Below client code will read the image from a file and persist to Person table in database.                       Person p=new Person();                      p.setName("Tom");                      p.setSex("male");                      p.setPicture(writtingImage("Image location"));// - c:\images\test.jpg                       sessionEJB.persistPerson(p); //Retrieving the image from Database table and writing to a file                       List<Person> plist=sessionEJB.getPersonFindAll();//                      Person person=(Person)plist.get(0);//get a person object                      retrieveImage(person.getPicture());   //get picture retrieved from Table //Private method to create byte[] from image file  private static byte[] writtingImage(String fileLocation) {      System.out.println("file lication is"+fileLocation);     IOManager manager=new IOManager();        try {           return manager.getBytesFromFile(fileLocation);                    } catch (IOException e) {        }        return null;    } //Private method to read byte[] from database and write to a image file    private static void retrieveImage(byte[] b) {    IOManager manager=new IOManager();        try {            manager.putBytesInFile("c:\\webtest.jpg",b);        } catch (IOException e) {        }    } End to End ADFaces application to retrieve the image from database table and display it in web page. Please find the application in this link. Following are the j2ee components used in the sample application. ADFFaces(jspx page) HttpServlet Class - Will make a call to EJB and retrieve the person object from person table.Read the byte[] and write to response using Outputstream. SessionEJBBean - This is a session facade to make a local call to JPA entities JPA Entity(Person.java) - Person java class with setter and getter method annotated with @Lob representing the clob/blob types for picture field.

  Read the article

• It&rsquo;s A Team Sport: PASS Board Year 2, Q3

  - by Denise McInerney

  As I type this I’m on an airplane en route to my 12th PASS Summit. It’s been a very busy 3.5 months since my last post on my work as a Board member. Nearing the end of my 2-year term I am struck by how much has happened, and yet how fast the time has gone. But I’ll save the retrospective post for next time and today focus on what happened in Q3. In the last three months we made progress on several fronts, thanks to the contributions of many volunteers and HQ staff members. They deserve our appreciation for their dedication to delivering for the membership week after week. Virtual Chapters The Virtual Chapters continue to provide many PASS members with valuable free training. Between July and September of 2013 VCs hosted over 50 webinars with a total of 4300 attendees. This quarter also saw the launch of the Security & Global Russian VCs. Both are off to a strong start and I welcome these additions to the Virtual Chapter portfolio. At the beginning of 2012 we had 14 Virtual Chapters. Today we have 22. This growth has been exciting to see. It has also created a need to have more volunteers help manage the work of the VCs year-round. We have renewed focus on having Virtual Chapter Mentors work with the VC Leaders and other volunteers. I am grateful to volunteers Julie Koesmarno, Thomas LeBlanc and Marcus Bittencourt who join original VC Mentor Steve Simon on this team. Thank you for stepping up to help. Many improvements to the VC web sites have been rolling out over the past few weeks. Our marketing and IT teams have been busy working a new look-and-feel, features and a logo for each VC. They have given the VCs a fresh, professional look consistent with the rest of the PASS branding, and all VCs now have a logo that connects to PASS and the particular focus of the chapter. 24 Hours of PASS The Summit Preview edition  of 24HOP was held on July 31 and by all accounts was a success. Our first use of the GoToWebinar platform for this event went extremely well. Thanks to our speakers, moderators and sponsors for making this event possible. Special thanks to HQ staffers Vicki Van Damme and Jane Duffy for a smoothly run event. Coming up: the 24HOP Portuguese Edition will be held November 13-14, followed December 12-13 by the Spanish Edition. Thanks to the Portuguese- and Spanish-speaking community volunteers who are organizing these events. July Board Meeting The Board met July 18-19 in Kansas City. The first order of business was the election of the Executive Committee who will take office January 1. I was elected Vice President of Marketing and will join incoming President Thomas LaRock, incoming Executive Vice President of Finance Adam Jorgensen and Immediate Past President Bill Graziano on the Exec Co. I am honored that my fellow Board members elected me to this position and look forward to serving the organization in this role. Visit to PASS HQ In late September I traveled to Vancouver for my first visit to PASS HQ, where I joined Tom LaRock and Adam Jorgensen to make plans for 2014.  Our visit was just a few weeks before PASS Summit and coincided with the Board election, and the office was humming with activity. I saw first-hand the enthusiasm and dedication of everyone there. In each interaction I observed a focus on what is best for PASS and our members. Our partners at HQ are key to the organization’s success. This week at PASS Summit is a great opportunity for all of us to remember that, and say “thanks.” Next Up PASS Summit—of course! I’ll be around all week and look forward to connecting with many of our member over meals, at the Community Zone and between sessions. In the evenings you can find me at the Welcome Reception, Exhibitor’s Reception and Community Appreciation Party. And I will be at the Board Q&A session  Friday at 12:45 p.m. Transitions The newly elected Exec Co and Board members take office January 1, and the Virtual Chapter portfolio is transitioning to a new director. I’m thrilled that Jen Stirrup will be taking over. Jen has experience as a volunteer and co-leader of the Business Intelligence Virtual Chapter and was a key contributor to the BI VCs expansion to serving our members in the EMEA region. I’ll be working closely with Jen over the next couple of months to ensure a smooth transition.

  Read the article

• SQL Developer Data Modeler v3.3 Early Adopter: Collaborative Design via Excel?

  - by thatjeffsmith

  As you may have heard last week, we have a new version of Oracle SQL Developer Data Modeler now available as an Early Adopter release. Version 3.3 has quite a few new features and I’ll be previewing them here. Today’s topic is our new Excel integration. It builds off of last week’s lesson: Search, so you may want to go read that first. They say it takes a village to raise a child. I say it takes a team to build a data model. You have your techie folks, your business folks, your in-betweeners, and your database geeks. Who gets to define how customers are represented and stored in your database? That data lives forever, so you better get it right from the beginning, or you’ll be living in a hacker’s paradise for years to come. Lots of good rantings, ravings, and advice on this topic in general on Karen Lopez’s (@datachick) blog. But let’s say you are the primary modeler on a project. You dutifully interview the business folks for their requirements. You sit down and start to model and think you’re pretty close. Now you need someone to confirm your assumptions and provide some feedback. Do you send your model over? Take a screenshot and blow it up on a whiteboard? Export to HTML and let them take a magic marker to their monitors? Or maybe you bite the bullet and install your modeling software on their desktops and take the hours or days required to train them up on how to use the the tool. Wouldn’t it be nice if they could just mark up their corrections in Excel and let you suck the updates back in? This is what we have started to build in Oracle SQL Developer Data Modeler. Let’s say you have a new table called ‘UT_STARTUPS.’ It looks a little something like this: A table in Oracle SQL Developer Data Modeler What I would like to do is have my team or co-worker review how I have defined those columns. Perhaps TIMESTAMP is overkill or maybe the column names themselves aren’t up to snuff. What I am going to do is now search for all the columns in my table, then export that to Excel. So do a search for UT_STARTUPS. Search, filter, then Report With the filter set to ‘Columns,’ if I do a report I’ll be only getting the columns that are resolving to my search term. So as long as my table name is unique in the model, I should get what I’m looking for. Here’s what I see when I click on the Report button: XLS or XLSX, either format is just fine I want to decide how the Column data is exported to Excel though, so I’m going to create a report template that I can use going forward. So click the ‘Manage’ button and setup a new template. I’m going to call mine ‘CollaborativeDevelopment.’ The templates allow me to define what properties are included in the reports. Once this is set, I’ll have the XLS file generated, and get to work Now let the Excel junkies do their stuff Note that not ALL of the report properties are update-able (yes, I made up a new word there) via Excel. We’ll have the full list of properties documented going forward, but in my Excel sheet, note that I can’t change the table name or the data types for the columns. I’m going to update some column names and supply ‘nice’ comments so the database users know what’s what. Here’s my input for the designer/architect/database dude: Be kind, please rew…use comments. Save the file, email it back to your modeler. Update the model from Excel That’s right, it’s a right mouse click from your model in the tree If everything goes right, you’ll see a nice confirmation message: It’s alive! Another to-do item on tap – making this dialog more informative. We’ll be showing exactly what in your model was updated from Excel. Let’s take another look at the model now Voila! Why are we doing this again? The goal is to reduce the number of round-trips from the modeler and the business process owner. One is used to working with Excel – why not allow them to mark up their changes in the tool they already know? This is an early adopter release and I anticipate this feature getting a good bit of tuning up before we release. Why don’t you download 3.3, give it a whirl, and let us know what you think?

  Read the article

• Spotlight on Claims: Serving Customers Under Extreme Conditions

  - by [email protected]

  Oracle Insurance's director of marketing for EMEA, John Sinclair, recently attended the CII Spotlight on Claims event in London. Bad weather and its implications for the insurance industry have become very topical as the frequency and diversity of natural disasters - including rains, wind and snow - has surged across Europe this winter. On England's wettest day on record, the county of Cumbria was flooded with 12 inches of rain within 24 hours. Freezing temperatures wreaked havoc on European travel, causing high speed TVG trains to break down and stranding hundreds of passengers under the English Chanel in a tunnel all night long without heat or electricity. A storm named Xynthia thrashed France and surrounding countries with hurricane force, flooding ports and killing 51 people. After the Spring Equinox, insurers may have thought the worst had past. Then came along Eyjafjallajökull, spewing out vast quantities of volcanic ash in what is turning out to be one of most costly natural disasters in history. Such extreme events challenge insurance companies' ability to service their customers just when customers need their help most. When you add economic downturn and competitive pressures to the mix, insurers are further stretched and required to continually learn and innovate to meet high customer expectations with reduced budgets. These and other issues were hot topics of discussion at the recent "Spotlight on Claims" seminar in London, focused on how weather is affecting claims and the insurance industry. The event was organized by the CII (Chartered Insurance Institute), a group with 90,000 members. CII has been at the forefront in setting professional standards for the insurance industry for over a century. Insurers came to the conference to hear how they could better serve their customers under extreme weather conditions, learn from the experience of their peers, and hear about technological breakthroughs in climate modeling, geographic intelligence and IT. Customer case studies at the conference highlighted the importance of effective and constant communication in handling the overflow of catastrophe related claims. First and foremost is the need to rapidly establish initial communication with claimants to build their confidence in a positive outcome. Ongoing communication then needs to be continued throughout the claims cycle to mange expectations and maintain ownership of the process from start to finish. Strong internal communication to support frontline staff was also deemed critical to successful crisis management, as was communication with the broader insurance ecosystem to tap into extended resources and business intelligence. Advances in technology - such web based systems to access policies and enter first notice of loss in the field - as well as customer-focused self-service portals and multichannel alerts, are instrumental in improving customer satisfaction and helping insurers to deal with the claims surge, which often can reach four or more times normal workloads. Dynamic models of the global climate system can now be used to better understand weather-related risks, and as these models mature it is hoped that they will soon become more accurate in predicting the timing of catastrophic events. Geographic intelligence is also being used within a claims environment to better assess loss reserves and detect fraud. Despite these advances in dealing with catastrophes and predicting their occurrence, there will never be a substitute for qualified front line staff to deal with customers. In light of pressures to streamline efficiency, there was debate as to whether outsourcing was the solution, or whether it was better to build on the people you have. In the final analysis, nearly everybody agreed that in the future insurance companies would have to work better and smarter to keep on top. An appeal was also made for greater collaboration amongst industry participants in dealing with the extreme conditions and systematic stress brought on by natural disasters. It was pointed out that the public oftentimes judged the industry as a whole rather than the individual carriers when it comes to freakish events, and that all would benefit at such times from the pooling of limited resources and professional skills rather than competing in silos for competitive advantage - especially the end customer. One case study that stood out was on how The Motorists Insurance Group was able to power through one of the most devastating catastrophes in recent years - Hurricane Ike. The keys to Motorists' success were superior people, processes and technology. They did a lot of upfront planning and invested in their people, creating a healthy team environment that delivered "max service" even when they were experiencing the same level of devastation as the rest of the population. Processes were rapidly adapted to meet the challenge of the catastrophe and continually adapted to Ike's specific conditions as they evolved. Technology was fundamental to the execution of their strategy, enabling them anywhere access, on the fly reassigning of resources and rapid training to augment the work force. You can learn more about the Motorists experience by watching this video. John Sinclair is marketing director for Oracle Insurance in EMEA. He has more than 20 years of experience in insurance and financial services.

  Read the article

• Spolskism or Twitterism: A Doctor writes...

  - by Phil Factor

  "I never realized I had a problem. I just 'twittered' because it was a social thing to do. All my mates were doing it. It made me feel good to have 'followers'; it bolstered my self-esteem. Of course, you don't think of the long-term effects on your work and on the way you think. There's no denying that it impairs your judgment…" Yes, this story is typical. Hundreds of people are waking up to the long term effects of twittering, and seeking help. Dave, who wishes to remain anonymous, told our reporter… "I started using Twitter at work. Just a few minutes now and then, throughout the day. A lot of my colleagues were doing it and I thought 'Well, that's cool; it must be part of what I should be doing at work'. Soon, I was avidly reading every twitter that came my way, and counting the minutes between my own twitters. I tried to kid myself that it was all about professional development and getting other people to help you with work-related problems, but in truth I had become addicted to the buzz of the social network. The worse thing was that it made me seem busy even when I was really just frittering my time away. Inevitably, I started to get behind with my real work." Experts have identified the syndrome and given it a name: 'Twitterism', sometimes referred to as 'Spolskism', after the person who first drew attention to the pernicious damage to well-being that the practice caused, and who had the courage to take the pledge of rejecting it. According to one expert… "The occasional Twitter does little harm to the participant, and can be an adaptive way of dealing with stress. Unfortunately, it rarely stops there. The addictive qualities of the practice have put a strain on the caring professions who are faced with a flood of people making that first bold step to seeking help". Dave is one of those now seeking help for his addiction… "I had lost touch with reality. Even though I twittered my work colleagues constantly, I found I actually spoke to them less and less. Even when out socializing, I would frequently disengage from the conversation, in order to twitter. I stopped blogging. I stopped responding to emails; the only way to reach me was through the world of Twitter. Unfortunately, my denial about the harm that twittering was doing to me, my friends, and my work-colleagues was so strong that I truly couldn't see that I had a problem." Like other addictions, the help and support of others who are 'taking the cure' is important. There is a common bond between those who have 'been through hell and back' and are once more able to experience the joys of actually conversing and socializing, rather than the false comfort of solitary 'twittering'. Complete abstinence is essential to the cure. Most of those who risk even an occasional twitter face a headlong slide back into 'binge' twittering. Tom, another twitterer who has managed to kick the habit explains… "My twittering addiction now seems more like a bad dream. You get to work, and switch on the PC. You say to yourself, just open up the browser, just for a minute, just to see what people are saying on Twitter. The next thing you know, half the day has gone by. The worst thing is that when you're addicted, you get good at covering up the habit; I spent so much time looking at the screen and typing on the keyboard, people just assumed I was working hard.I know that I must never forget what it was like then, and what it's like now that I've kicked the habit. I now have more time for productive work and a real social life." Like many addictions, Spolskism has its most detrimental effects on family, friends and workmates, rather than the addict. So often nowadays, we hear the sad stories of Twitter-Widows; tales of long lonely evenings spent whilst their partners are engrossed in their twittering into their 'mobiles' or indulging in their solitary spolskistic habits in privacy, under cover of 'having to do work at home'. Workmates suffer too, when the addicts even take their laptops or mobiles into meetings in order to 'twitter' with their fellow obsessives, even stooping to complain to their followers how boring the meeting is. No; The best advice is to leave twittering to the birds. You know it makes sense.

  Read the article

• [GEEK SCHOOL] Network Security 3: Windows Defender and a Malware-Free System

  - by Ciprian Rusen

  In this second lesson we are going to talk about one of the most confusing security products that are bundled with Windows: Windows Defender. In the past, this product has had a bad reputation and for good reason – it was very limited in its capacity to protect your computer from real-world malware. However, the latest version included in Windows 8.x operating systems is much different than in the past and it provides real protection to its users. The nice thing about Windows Defender in its current incarnation, is that it protects your system from the start, so there are never gaps in coverage. We will start this lesson by explaining what Windows Defender is in Windows 7 and Vista versus what it is in Windows 8, and what product to use if you are using an earlier version. We next will explore how to use Windows Defender, how to improve its default settings, and how to deal with the alerts that it displays. As you will see, Windows Defender will have you using its list of quarantined items a lot more often than other security products. This is why we will explain in detail how to work with it and remove malware for good or restore those items that are only false alarms. Lastly, you will learn how to turn off Windows Defender if you no longer want to use it and you prefer a third-party security product in its place and then how to enable it back, if you have changed your mind about using it. Upon completion, you should have a thorough understanding of your system’s default anti-malware options, or how to protect your system expeditiously. What is Windows Defender? Unfortunately there is no one clear answer to this question because of the confusing way Microsoft has chosen to name its security products. Windows Defender is a different product, depending on the Windows operating system you are using. If you use Windows Vista or Windows 7, then Windows Defender is a security tool that protects your computer from spyware. This but one form of malware made out of tools and applications that monitor your movements on the Internet or the activities you make on your computer. Spyware tends to send the information that is collected to a remote server and it is later used in all kinds of malicious purposes, from displaying advertising you don’t want, to using your personal data, etc. However, there are many other types of malware on the Internet and this version of Windows Defender is not able to protect users from any of them. That’s why, if you are using Windows 7 or earlier, we strongly recommend that you disable Windows Defender and install a more complete security product like Microsoft Security Essentials, or third-party security products from specialized security vendors. If you use Windows 8.x operating systems, then Windows Defender is the same thing as Microsoft Security Essentials: a decent security product that protects your computer in-real time from viruses and spyware. The fact that this product protects your computer also from viruses, not just from spyware, makes a huge difference. If you don’t want to pay for security products, Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) are good alternatives. Windows Defender in Windows 8.x and Microsoft Security Essentials are the same product, only their name is different. In this lesson, we will use the Windows Defender version from Windows 8.x but our instructions apply also to Microsoft Security Essentials (MSE) in Windows 7 and Windows Vista. If you want to download Microsoft Security Essentials and try it out, we recommend you to use this page: Download Microsoft Security Essentials. There you will find both 32-bit and 64-bit editions of this product as well versions in multiple languages. How to Use and Configure Windows Defender Using Windows Defender (MSE) is very easy to use. To start, search for “defender” on the Windows 8.x Start screen and click or tap the “Windows Defender” search result. In Windows 7, search for “security” in the Start Menu search box and click “Microsoft Security Essentials”. Windows Defender has four tabs which give you access to the following tools and options: Home – here you can view the security status of your system. If everything is alright, then it will be colored in green. If there are some warnings to consider, then it will be colored in yellow, and if there are threats that must be dealt with, everything will be colored in red. On the right side of the “Home” tab you will find options for scanning your computer for viruses and spyware. On the bottom of the tab you will find information about when the last scan was performed and what type of scan it was. Update – here you will find information on whether this product is up-to-date. You will learn when it was last updated and the versions of the definitions it is using. You can also trigger a manual update. History – here you can access quarantined items, see which items you’ve allowed to run on your PC even if they were identified as malware by Windows Defender, and view a complete list with all the malicious items Windows Defender has detected on your PC. In order to access all these lists and work with them, you need to be signed in as an administrator. Settings – this is the tab where you can turn on the real-time protection service, exclude files, file types, processes, and locations from its scans as well as access a couple of more advanced settings. The only difference between Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) is that, in the “Settings” tab, Microsoft Security Essentials allows you to set when to run scheduled scans while Windows Defender lacks this option.

  Read the article

• Responsible BI for Excel, Even for Older Versions

  - by andrewbrust

  On Wednesday, I will have the honor of co-presenting, for both The Data Warehouse Institute (TDWI) and the New York Technology Council. on the subject of Excel and BI. My co-presenter will be none other than Bill Baker, who was a Microsoft Distinguished Engineer and, essentially, the father of BI at that company.  Details on the events are here and here. We'll be talking about PowerPivot, of course, but that's not all. Probably even more important than any one product, will be our discussion of whether the usual characterization of Excel as the nemesis of IT, the guilty pleasure of business users and the antithesis of formal BI is really valid and/or hopelessly intractable. Without giving away our punchline, I'll tell you that we are much more optimistic than that. There are huge upsides to Excel and while there are real dangers to using it in the BI space, there are standards and practices you can employ to ensure Excel is used responsibly. And when those practices are followed, Excel becomes quite powerful indeed. One of the keys to this is using Excel as a data consumer rather than data storage mechanism. Caching data in Excel is OK, but only if that data is (a) not modified and (b) configured for automated periodic refresh. PowerPivot meets both criteria -- it stores a read-only copy of your data in the form of a model, and once workbook containing a PowerPivot model is published to SharePoint, it can be configured for scheduled data refresh, on the server, requiring no user intervention whatsoever. Data refresh is a bit like hard drive backup: it will only happen reliably if it's automated, and super-easy to configure. PowerPivot hits a real home run here (as does Windows Home Server for PC backup, but I digress). The thing about PowerPivot is that it's an add-in for Excel 2010. What if you're not planning to go to that new version for quite a while? What if you’ve just deployed Office 2007 in your organization? What if you're still on Office 2003, or an even earlier version? What can you do immediately to share data responsibly and easily? As it turns out, there's a feature in Excel that's been around for quite a while, that can help: Web Queries.  The Web Query feature was introduced, ostensibly, to allow Excel to pull data in from Internet Web pages…for example, data in a stock quote history table will come in nicely, as will any data in a Web page that is displayed in an HTML table.  To use the feature In Excel 2007 or 2010, click the Data Tab or the ribbon and click the “From Web” button towards the left; in older versions use the corresponding option in  the menu or  toolbars.  Next, paste a URL into the resulting dialog box and tap Enter or click the Go button.  A preview of the Web page will come up, and the dialog will allow you to select the specific table within the page whose data you’d like to import.  Here’s an example: Now just click the table, click the Import button, and the Import Data dialog appears.  You can simply click OK to bring in your data or you can first click the Properties… button and configure the data import to be refreshed at an interval in minutes that you select.  Now your data’s in the spreadsheet and ready to worked with: Your data may be vulnerable to modification, but if you’ve set up the data refresh, any accidental or malicious changes will be corrected in time anyway. The thing about this feature is that it’s most useful not for public Web pages, but for pages behind the firewall.  In effect, the Web Query feature provides an incredibly easy way to consume data in Excel that’s “published” from an application.  Users just need a URL.  They don’t need to know server and database names and since the data is read-only, providing credentials may be unnecessary, or can be handled using integrated security.  If that’s not good enough, the Web Query can be saved to a special .iqy file, which can be edited to provide POST parameter data. The only requirement is that the data must be provided in an HTML table, with the first row providing the column names.  From an ASP.NET project, it couldn’t be easier: a simple bound GridView control is totally compatible.  Use a data source control with it, and you don’t even have to write any code.  Users can link to pages that are part of an application’s UI, or developers can create pages that are specially designed for the purpose of providing an interface to the Web Query import feature.  And none of this is Microsoft- or .NET-specific.  You can create pages in any language you want (PHP comes to mind) that output the result set of a query in HTML table format, and then consume that data in a Web Query.  Then build PivotTables and charts on the data, and in Excel 2007 or 2010 you can use conditional formatting to create scorecards and dashboards. This strategy allows you to create pages that function quite similarly to the OData XML feeds rendered when .NET developers create an “Astoria” WCF Data Service.  And while it’s cool that PowerPivot and Excel 2010 can import such OData feeds, it’s good to know that older versions of Excel can function in a similar fashion, and can consume data produced by virtually any Web development platform. As a final matter, instead of just telling you that “older versions” of Excel support this feature, I’ll be more specific.  To discover what the first version of Excel was to support Web queries, go to http://bit.ly/OldSchoolXL.

  Read the article

• Say What? Podcasting As Part of Your Content Marketing

  - by Mike Stiles

  What do you usually do in your car on the way to work?  Sing along to radio? Stream Pandora or iHeartRadio? Talk on the phone? Sit in total silence? Whatever it is you do, you could be using that time to make yourself an expert in any range of topics…using podcasts. We invite you to follow or subscribe to the daily Oracle Social Spotlight podcast, a quick roundup of the day’s top stories around social marketing and the social networks. After podcasts arrived in 2004, growth was steady but slow. The concept was strong: anyone with a passion for any subject could make a show for anyone who cared to listen. Enter the smartphone, iTunes, new podcasting platforms, and social, and podcasting became easier than ever and made more sense for both podcasters and listeners. Stats show 1 in 5 smartphone owners are podcast consumers and 29% of Americans have listened to a podcast. The potential audience is also larger than ever. “Baked in” podcast apps on over 200 million devices expose users to volumes of audio content with just a tap. 97 million Americans are driving to work every day by themselves. And 38% of Americans listen to audio on a digital device each week, a number that’s projected to double by 2015. Does that mean your brand should be podcasting? That’s part of a larger discussion about your overall content strategy, provided you have one. But if you do and podcasting is a component of it, here are some things to keep in mind: Don’t podcast just to do it. Podcast because you thought of a show customers and prospects will like that they can’t get anywhere else. Sound quality matters. Good microphones are not expensive. Bad sound is annoying, makes your brand feel cheap, and will turn today’s sophisticated ears off. The host matters. Many think they belong on the radio. Few actually do. Your brand’s host should be comfortable & likeable. A top advantage of a podcast is people can bond with a real person. It’s a trust opportunity, so don’t take it lightly. The content matters. “All killer, no filler” means don’t allow babbling just to fill enough time for an episode. Value the listeners’ time, because that time is hard to get. Put time, effort and creativity into it. Sure you’re a business, but you’re competing with content from professional media and showbiz producers. If you can include music, sound effects, and things that amuse the ears, do it. If you start, be consistent. The #1 flaw in podcasting is when listeners can’t count on another episode or don’t know when it’s coming. Don’t skip doing shows just because you can. Get committed. Get your cover art right. Podcasting is about audio, but people shop for podcasts by glancing through graphics. Yours has to be professional, cool, and informative to get listeners interested. Cross-promote your podcast on all your channels. The competition for listeners is fierce, so if you have existing audiences you can leverage to launch your show, use them. Optimize it for mobile. Assume that’s where most listening will take place. If you’re using one of the podcast platform apps, you should be in good shape. Frankly, the percentage of brands that are podcasting is quite low, and that’s okay. Once you move beyond blogging and start connecting with real voices, poor execution can do damage. But more (32%) marketers want to learn how to use podcasting, and more (23%) were increasing their podcasting throughout this year. Bottom line, you want to share your brand’s message and stories wherever your audience might be and in whatever way they prefer to take in content. Many prefer to do that while driving or working out, using the eyes and hands-free medium of audio. @mikestilesPhoto: stock.xchng

  Read the article

• SQLAuthority Guest Post – Lessons from Life and Work by Srini Chandra (Author of 3 Lives, in search of bliss)

  - by pinaldave

  Work and life are confusing terms together. How can one consider work outside of life. Work should be part of life or are we considering ourselves dead when we are at work. I have often seen developers and DBA complaining and confused about their job, work and life. Complaining is easy and everyone can do. I have heard quite often expression – “I do not have any other option.” I requested Srini Chanda (renowned author of Amazon Best Seller 3 Lives, in search of bliss (Amazon | Flipkart) to write a guest post on this subject which developer can read and appreciate. Let us see Srini’s thoughts in his own words. Each of us who works in the technology industry carries an especially heavy burden nowadays. For, fate has placed in our hands an awesome power to shape our society and its consciousness. For that reason, we must pay more and more attention to issues of professionalism, social responsibility and ethics. Equally importantly, the responsibility lies in our hands to ensure that we view our work and career as an opportunity to enlighten and lift ourselves up. Story: A Prisoner, 20 years and a Wheel Many years ago, I heard this story from a professor when I was a student at Carnegie Mellon. A man was sentenced to 20 years in prison. During his time in prison, he was asked to turn a wheel every day. So, every day he turned the wheel. At times, when he was tired or puzzled and stopped turning the wheel, he would be flogged with a whip. The man did not know anything about the wheel other than that it was placed outside his jail somewhere. He wondered if the wheel crushed corn or if it ground wheat or something similar. He wondered if turning the wheel was useful to anyone. At the end of his jail term, he rushed out to see what the wheel was doing. To his disappointment, he found that the wheel was not connected to anything. All these years, he had been toiling for nothing. He gave a loud, frustrated shout and dropped dead. How many of us are turning wheels wondering what it is connected to? How many of us have unstated, uncaring attitudes towards our careers? How many of us view work as drudgery, as no more than a way to earn that next paycheck? How many of us have wondered about the spiritually uplifting aspect of work? Can a workforce that views work as merely a chore, be ethical? Can it produce truly life enhancing technology? Can it make positive contributions to the quality of life of a society? I think not. Thanks to Pinal and you, his readers, for giving me this opportunity to share my thoughts in a series of guest posts. I’d like to present a few ways over the next few weeks, in which we can tap into the liberating potential of work and make our lives better in the process. Now, please allow me to tell you another version of the story that the good professor shared with us in the classroom that day. Story: A Prisoner, 20 years, a Wheel and the LIFE A man was sentenced to 20 years in prison. During his time in prison, he was asked to turn a wheel every day. So, every day he turned the wheel. At first, his whole body and mind rebelled against his predicament. So, his limbs grew weary and his mind became numb and confused. And then, his self-awareness began to grow. He began to wonder how he came to be in the prison in the first place. He looked around and saw all his fellow prisoners also turning the wheel. His wife, his parents, his friends and his children – they were all in the prison too, and turning their own wheels! He began to wonder how this came about. As he wondered more and more, he began to focus less on his physical drudgery and boredom. And he began to clearly see his inner spirit which guided him in ways that allowed him to see the world with a universal view. His inner spirit guided him towards the source of eternal wisdom and happiness. He began to see the source of happiness in everything around him – his prison bound relationships, even his jailers and in his wheel. He became a source of light to those around him. His wheel jokes and humor infected them with joy and happiness. Finally, the day came for his release from jail. He walked calmly outside the jail and laughed aloud when he saw that the wheel was not connected to anything. He knelt down, kissed it and thanked it for the wisdom it taught him. Life is the prison. The wheel is your work. Both are sacred. Both have enormous powers to teach us wisdom and bring us happiness. Whether we allow them to do so, is a choice we have to make. Over the next few weeks, I hope to share with you a few lessons that I have learnt at the wheel in my two decades of my career (prison). Thank you for reading, and do let me know what you think. Reference: Srini Chandra (3 Lives, in search of bliss), Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, T SQL, Technology

  Read the article

• Planning an Event&ndash;SPS NYC

  - by MOSSLover

  I bet some of you were wondering why I am not going to any events for the most part in June and July (aside from volunteering at SPS Chicago).  Well I basically have no life for the next 2 months.  We are approaching the 11th hour of SharePoint Saturday New York City.  The event is slated to have 350 to 400 attendees.  This is second year in a row I’ve helped run it with Jason Gallicchio.  It’s amazingly crazy how much effort this event requires versus Kansas City.  It’s literally 2x the volume of attendees, speakers, and sponsors plus don’t even get me started about volunteers.  So here is a bit of the break down… We have 30 volunteers+ that Tasha Scott from the Hampton Roads Area will be managing the day of the event to do things like timing the speakers, handing out food, making sure people don’t walk into the event that did not sign up until we get a count for fire code, registering people, watching the sharpees, watching the prizes, making sure attendees get to the right place,  opening and closing the partition in the big room, moving chairs, moving furniture, etc…Then there is Jason, Greg, and I who will be making sure that the speakers, sponsors, and everything is going smoothly in the background.  We need to make sure that everything is setup properly and in the right spot.  We also need to make sure signs are printed, schedules are created, bags are stuffed with sponsor material.  Plus we need to send out emails to sponsors reminding them to send us the right information to post on the site for charity sessions, send us boxes with material to stuff bags, and we need to make sure that Michael Lotter gets there information for invoicing.  We also need to check that Michael has invoiced everyone and who has paid, because we can’t order anything for the event without money.  Once people have paid we need to setup food orders, speaker and volunteer dinners, buy prizes, buy bags, buy speakers/volunteer/organizer shirts, etc…During this process we need all the abstracts from speakers, all the bios, pictures, shirt sizes, and other items so we can create schedules and order items.  We also need to keep track of who is attending the dinner the night before for volunteers and speakers and make sure we don’t hit capacity.  Then there is attendee tracking and making sure that we don’t hit too many attendees.  We need to make sure that attendees know where to go and what to do.  We have to make all kinds of random supply lists during this process and keep on track with a variety of lists and emails plus conference calls.  All in all it’s a lot of work and I am trying to keep track of it all the top so that we don’t duplicate anything or miss anything.  So basically all in all if you don’t see me around for another month don’t worry I do exist. Right now if you look at what I’m doing I am traveling every Monday morning and Thursday night back and forth to Washington DC from New Jersey.  Every night I am working on organizational stuff for SharePoint Saturday New York City.  Every Tuesday night we are running an event conference call.  Every weekend I am either with family or my boyfriend and cat trying hard not to touch the event.  So all my time is pretty much work, event, and family/boyfriend.  I have 0 bandwidth for anything in the community.  If you compound that with my severe allergy problems in DC and a doctor’s appointment every month plus a new med once a week I’m lucky I am still standing and walking.  So basically once July 30th hits hopefully Jason Gallicchio, Greg Hurlman, and myself will be able to breathe a little easier.  If I forget to do this thank you Greg and Jason.  Thank you Tom Daly.  Thank you Michael Lotter.  Thank you Tasha Scott.  Thank you Kevin Griffin.  Thank you all the volunteers, speakers, sponsors, and attendees who will and have made this event a success.  Hopefully, we have enough time until next year to regroup, recharge, and make the event grow bigger in a different venue.  Awesome job everyone we sole out within 3 days of registration and we still have several weeks to go.  Right now the waitlist is at 49 people with room to grow.  If you attend the event thank all these guys I mentioned above for making it possible.  It’s going to be awesome I know it but I probably won’t remember half of it due to the blur of things that we will all be taking care of the day of the event.  Catch you all in the end of July/Early August where I will attempt to post something useful and clever and possibly while wearing a fez. Technorati Tags: SPS NYC,SharePoint Saturday,SharePoint Saturday New York City

  Read the article

• Summit reflections

  - by Rob Farley

  So far, my three PASS Summit experiences have been notably different to each other. My first, I wasn’t on the board and I gave two regular sessions and a Lightning Talk in which I told jokes. My second, I was a board advisor, and I delivered a precon, a spotlight and a Lightning Talk in which I sang. My third (last week), I was a full board director, and I didn’t present at all. Let’s not talk about next year. I’m not sure there are many options left. This year, I noticed that a lot more people recognised me and said hello. I guess that’s potentially because of the singing last year, but could also be because board elections can bring a fair bit of attention, and because of the effort I’ve put in through things like 24HOP... Yeah, ok. It’d be the singing. My approach was very different though. I was watching things through different eyes. I looked for the things that seemed to be working and the things that didn’t. I had staff there again, and was curious to know how their things were working out. I knew a lot more about what was going on behind the scenes to make various things happen, and although very little about the Summit was actually my responsibility (based on not having that portfolio), my perspective had moved considerably. Before the Summit started, Board Members had been given notebooks – an idea Tom (who heads up PASS’ marketing) had come up with after being inspired by seeing Bill walk around with a notebook. The plan was to take notes about feedback we got from people. It was a good thing, and the notebook forms a nice pair with the SQLBits one I got a couple of years ago when I last spoke there. I think one of the biggest impacts of this was that during the first keynote, Bill told everyone present about the notebooks. This set a tone of “we’re listening”, and a number of people were definitely keen to tell us things that would cause us to pull out our notebooks. PASSTV was a new thing this year. Justin, the host, featured on the couch and talked a lot of people about a lot of things, including me (he talked to me about a lot of things, I don’t think he talked to a lot people about me). Reaching people through online methods is something which interests me a lot – it has huge potential, and I love the idea of being able to broadcast to people who are unable to attend in person. I’m keen to see how this medium can be developed over time. People who know me will know that I’m a keen advocate of certification – I've been SQL certified since version 6.5, and have even been involved in creating exams. However, I don’t believe in studying for exams. I think training is worthwhile for learning new skills, but the goal should be on learning those skills, not on passing an exam. Exams should be for proving that the skills are there, not a goal in themselves. The PASS Summit is an excellent place to take exams though, and with an attitude of professional development throughout the event, why not? So I did. I wasn’t expecting to take one, but I was persuaded and took the MCM Knowledge Exam. I hadn’t even looked at the syllabus, but tried it anyway. I was very tired, and even fell asleep at one point during it. I’ll find out my result at some point in the future – the Prometric site just says “Tested” at the moment. As I said, it wasn’t something I was expecting to do, but it was good to have something unexpected during the week. Of course it was good to catch up with old friends and make new ones. I feel like every time I’m in the US I see things develop a bit more, with more and more people knowing who I am, who my staff are, and recognising the LobsterPot brand. I missed being a presenter, but I definitely enjoyed seeing many friends on the list of presenters. I won’t try to list them, because there are so many these days that people might feel sad if I don’t mention them. For those that I managed to see, I was pleased to see that the majority of them have lifted their presentation skills since I last saw them, and I happily told them as much. One person who I will mention was Paul White, who travelled from New Zealand to his first PASS Summit. He gave two sessions (a regular session and a half-day), packed large rooms of people, and had everyone buzzing with enthusiasm. I spoke to him after the event, and he told me that his expectations were blown away. Paul isn’t normally a fan of crowds, and the thought of 4000 people would have been scary. But he told me he had no idea that people would welcome him so well, be so friendly and so down to earth. He’s seen the significance of the SQL Server community, and says he’ll be back. It’ll be good to see him there. Will you be there too?

  Read the article

• Silverlight Cream Monday WP7 App Review # 2

  - by Dave Campbell

  Today's Review (alphabetic order): GooNews, Grocery Shopping List, Need for Speed, SurfCube, and United Nations News. I'm a day late if these are going to be 'Monday' posts, but there are lots of apps, lots of goodness, and lots of email, so I might try to do 2 a week, we'll see. So once again I've got a small review of 5 apps that are either on my phone or have been. Disclaimers at the end. In this Issue:   GooNews is a very cool app from Shawn Wildermuth (AgiliTrain). I don't know if he uses this as a demo during his instruction, but it definitely serves a purpose... wanna pick up the top news items from Google on a never-ending basis? ... this is it. You can add your own keyword searches, and send stories to InstaPaper or share via email. I like this because it brings me the news quickly and updated, and works great. GooNews is by AgiliTrain and is Free This was a request by the author, and actually surprised me. I'm a big one for lists, but I would have just done a OneNote list to SkyDrive and to my phone. This app is a lot more than that, but will take you some setup to make it be 'yours'. For obvious reasons, there are no unit prices on things, so you have to set that up to get some idea of the cost of what you're shopping for. But if you do that, you'll get a nice total. Lots of thought went into the various categories and you can add your own. There's a bit of animation on the category selection that's nice. He seems to have covered all the bases necessary to use this, even shopping 'plans' that can be saved, and emailing of lists. As I said, I'm more of a raw list person, but if you take the time to set this up, it should work very nicely for you. Grocery Shopping List is by Grocery Shopper and is $0.99 ($1.99 after Feb 1) with a free trial. This was my 2nd commercial game I bought, and the one I've played the most. I ran the trial, thought it worked great, and bought it. I've had a lot of fun with this... there's no gas pedal.. your foot is in the carbeurator from the GO!, and unless you wanna tap the screen and brake like a little girl, just hang onto the steering wheel (the phone), and guide your way through. Hours of fun and challenges here. I like this because it's got some challenge to it, and the cars seem to be very realistic in their reactions. Need for Speed Undercover is by Electronic Arts is $4.99 and has a free trial. SurfCube Browser is another app by the folks that did the GuitarTuner I reviewed on Monday. You have to see SurfCube to believe it. You've probably seen the YouTube video, if not check SilverlightCream number 1017. The app works very solid, and just as the video demonstrates. I downloaded and tried this, and it immediately did 2 things: bought it, and pinned it to my start page. I like this because it's fun to work with, and it works great as a browser. I'm about *this* close to replacing the IE tile on my front page with SurfCube. SurfCube Browser is by Kinabalu Innovation Limited and is $1.99 and has a free trial. Coming in with another News app is United Nations News by Justin Angel. This is definitely a news aggregator for 'grown ups'... news, photos, videos, and radio broadcsts from the international community all in one very slick app. This is an amazingly well thought-out and complete app. Even better yet, Justin has the code on CodePlex. A very well-done International news aggregator. United Nations News is by Justin Angel and is Free. A few disclaimers: Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week (twice if I find time), and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. I'm still playing with the format, comments are welcome. I decided I should alphabetize the list today... so there's no order implied Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Which of these algorithms is best for my goal?

  - by JonathonG

  I have created a program that restricts the mouse to a certain region based on a black/white bitmap. The program is 100% functional as-is, but uses an inaccurate, albeit fast, algorithm for repositioning the mouse when it strays outside the area. Currently, when the mouse moves outside the area, basically what happens is this: A line is drawn between a pre-defined static point inside the region and the mouse's new position. The point where that line intersects the edge of the allowed area is found. The mouse is moved to that point. This works, but only works perfectly for a perfect circle with the pre-defined point set in the exact center. Unfortunately, this will never be the case. The application will be used with a variety of rectangles and irregular, amorphous shapes. On such shapes, the point where the line drawn intersects the edge will usually not be the closest point on the shape to the mouse. I need to create a new algorithm that finds the closest point to the mouse's new position on the edge of the allowed area. I have several ideas about this, but I am not sure of their validity, in that they may have far too much overhead. While I am not asking for code, it might help to know that I am using Objective C / Cocoa, developing for OS X, as I feel the language being used might affect the efficiency of potential methods. My ideas are: Using a bit of trigonometry to project lines would work, but that would require some kind of intense algorithm to test every point on every line until it found the edge of the region... That seems too resource intensive since there could be something like 200 lines that would have each have to have as many as 200 pixels checked for black/white.... Using something like an A* pathing algorithm to find the shortest path to a black pixel; however, A* seems resource intensive, even though I could probably restrict it to only checking roughly in one direction. It also seems like it will take more time and effort than I have available to spend on this small portion of the much larger project I am working on, correct me if I am wrong and it would not be a significant amount of code (100 lines or around there). Mapping the border of the region before the application begins running the event tap loop. I think I could accomplish this by using my current line-based algorithm to find an edge point and then initiating an algorithm that checks all 8 pixels around that pixel, finds the next border pixel in one direction, and continues to do this until it comes back to the starting pixel. I could then store that data in an array to be used for the entire duration of the program, and have the mouse re-positioning method check the array for the closest pixel on the border to the mouse target position. That last method would presumably execute it's initial border mapping fairly quickly. (It would only have to map between 2,000 and 8,000 pixels, which means 8,000 to 64,000 checked, and I could even permanently store the data to make launching faster.) However, I am uncertain as to how much overhead it would take to scan through that array for the shortest distance for every single mouse move event... I suppose there could be a shortcut to restrict the number of elements in the array that will be checked to a variable number starting with the intersecting point on the line (from my original algorithm), and raise/lower that number to experiment with the overhead/accuracy tradeoff. Please let me know if I am over thinking this and there is an easier way that will work just fine, or which of these methods would be able to execute something like 30 times per second to keep mouse movement smooth, or if you have a better/faster method. I've posted relevant parts of my code below for reference, and included an example of what the area might look like. (I check for color value against a loaded bitmap that is black/white.) // // This part of my code runs every single time the mouse moves. // CGPoint point = CGEventGetLocation(event); float tX = point.x; float tY = point.y; if( is_in_area(tX,tY, mouse_mask)){ // target is inside O.K. area, do nothing }else{ CGPoint target; //point inside restricted region: float iX = 600; // inside x float iY = 500; // inside y // delta to midpoint between iX,iY and tX,tY float dX; float dY; float accuracy = .5; //accuracy to loop until reached do { dX = (tX-iX)/2; dY = (tY-iY)/2; if(is_in_area((tX-dX),(tY-dY),mouse_mask)){ iX += dX; iY += dY; } else { tX -= dX; tY -= dY; } } while (abs(dX)>accuracy || abs(dY)>accuracy); target = CGPointMake(roundf(tX), roundf(tY)); CGDisplayMoveCursorToPoint(CGMainDisplayID(),target); } Here is "is_in_area(int x, int y)" : bool is_in_area(NSInteger x, NSInteger y, NSBitmapImageRep *mouse_mask){ NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; NSUInteger pixel[4]; [mouse_mask getPixel:pixel atX:x y:y]; if(pixel[0]!= 0){ [pool release]; return false; } [pool release]; return true; }

  Read the article

• BYOD-The Tablet Difference

  - by Samantha.Y. Ma

  By Allison Kutz, Lindsay Richardson, and Jennifer Rossbach, Sales Consultants Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Less than three years ago, Apple introduced a new concept to the world: The Tablet. It’s hard to believe that in only 32 months, the iPad induced an entire new way to do business. Because of their mobility and ease-of-use, tablets have grown in popularity to keep up with the increasing “on the go” lifestyle, and their popularity isn’t expected to decrease any time soon. In fact, global tablet sales are expected to increase drastically within the next five years, from 56 million tablets to 375 million by 2016. Tablets have been utilized for every function imaginable in today’s world. With over 730,000 active applications available for the iPad, these tablets are educational devices, portable book collections, gateways into social media, entertainment for children when Mom and Dad need a minute on their own, and so much more. It’s no wonder that 74% of those who own a tablet use it daily, 60% use it several times a day, and an average of 13.9 hours per week are spent tapping away. Tablets have become a critical part of a user’s personal life; but why stop there? Businesses today are taking major strides in implementing these devices, with the hopes of benefiting from efficiency and productivity gains. Limo and taxi drivers use tablets as payment devices instead of traditional cash transactions. Retail outlets use tablets to find the exact merchandise customers are looking for. Professors use tablets to teach their classes, and business professionals demonstrate solutions and review reports from tablets. Since an overwhelming majority of tablet users have started to use their personal iPads, PlayBooks, Galaxys, etc. in the workforce, organizations have had to make a change. In many cases, companies are willing to make that change. In fact, 79% of companies are making new investments in mobility this year. Gartner reported that 90% of organizations are expected to support corporate applications on personal devices by 2014. It’s not just companies that are changing. Business professionals have become accustomed to tablets making their personal lives easier, and want that same effect in the workplace. Professionals no longer want to waste time manually entering data in their computer, or worse yet in a notebook, especially when the data has to be later transcribed to an online system. The response: the Bring Your Own Device phenomenon. According to Gartner, BOYD is “an alternative strategy allowing employees, business partners and other users to utilize a personally selected and purchased client device to execute enterprise applications and access data.” Employees whose companies embrace this trend are more efficient because they get to use devices they are already accustomed to. Tablets change the game when it comes to how sales professionals perform their jobs. Sales reps can easily store and access customer information and analytics using tablet applications, such as Oracle Fusion Tap. This method is much more enticing for sales reps than spending time logging interactions on their (what seem to be outdated) computers. Forrester & IDC reported that on average sales reps spend 65% of their time on activities other than selling, so having a tablet application to use on the go is extremely powerful. In February, Information Week released a list of “9 Powerful Business Uses for Tablet Computers,” ranging from “enhancing the customer experience” to “improving data accuracy” to “eco-friendly motivations”. Tablets compliment the lifestyle of professionals who strive to be effective and efficient, both in the office and on the road. Three Things Businesses Need to do to Embrace BYOD Make customer-facing websites tablet-friendly for consistent user experiences Develop tablet applications to continue to enhance the customer experience Embrace and use the technology that comes with tablets Almost 55 million people in the U.S. own tablets because they are convenient, easy, and powerful. These are qualities that companies strive to achieve with any piece of technology. The inherent power of the devices coupled with the growing number of business applications ensures that tablets will transform the way that companies and employees perform.

  Read the article

• boot issues - long delay, then "gave up waiting for root device"

  - by chazomaticus

  I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

  Read the article

• Summit reflections

  - by Rob Farley

  So far, my three PASS Summit experiences have been notably different to each other. My first, I wasn’t on the board and I gave two regular sessions and a Lightning Talk in which I told jokes. My second, I was a board advisor, and I delivered a precon, a spotlight and a Lightning Talk in which I sang. My third (last week), I was a full board director, and I didn’t present at all. Let’s not talk about next year. I’m not sure there are many options left. This year, I noticed that a lot more people recognised me and said hello. I guess that’s potentially because of the singing last year, but could also be because board elections can bring a fair bit of attention, and because of the effort I’ve put in through things like 24HOP... Yeah, ok. It’d be the singing. My approach was very different though. I was watching things through different eyes. I looked for the things that seemed to be working and the things that didn’t. I had staff there again, and was curious to know how their things were working out. I knew a lot more about what was going on behind the scenes to make various things happen, and although very little about the Summit was actually my responsibility (based on not having that portfolio), my perspective had moved considerably. Before the Summit started, Board Members had been given notebooks – an idea Tom (who heads up PASS’ marketing) had come up with after being inspired by seeing Bill walk around with a notebook. The plan was to take notes about feedback we got from people. It was a good thing, and the notebook forms a nice pair with the SQLBits one I got a couple of years ago when I last spoke there. I think one of the biggest impacts of this was that during the first keynote, Bill told everyone present about the notebooks. This set a tone of “we’re listening”, and a number of people were definitely keen to tell us things that would cause us to pull out our notebooks. PASSTV was a new thing this year. Justin, the host, featured on the couch and talked a lot of people about a lot of things, including me (he talked to me about a lot of things, I don’t think he talked to a lot people about me). Reaching people through online methods is something which interests me a lot – it has huge potential, and I love the idea of being able to broadcast to people who are unable to attend in person. I’m keen to see how this medium can be developed over time. People who know me will know that I’m a keen advocate of certification – I've been SQL certified since version 6.5, and have even been involved in creating exams. However, I don’t believe in studying for exams. I think training is worthwhile for learning new skills, but the goal should be on learning those skills, not on passing an exam. Exams should be for proving that the skills are there, not a goal in themselves. The PASS Summit is an excellent place to take exams though, and with an attitude of professional development throughout the event, why not? So I did. I wasn’t expecting to take one, but I was persuaded and took the MCM Knowledge Exam. I hadn’t even looked at the syllabus, but tried it anyway. I was very tired, and even fell asleep at one point during it. I’ll find out my result at some point in the future – the Prometric site just says “Tested” at the moment. As I said, it wasn’t something I was expecting to do, but it was good to have something unexpected during the week. Of course it was good to catch up with old friends and make new ones. I feel like every time I’m in the US I see things develop a bit more, with more and more people knowing who I am, who my staff are, and recognising the LobsterPot brand. I missed being a presenter, but I definitely enjoyed seeing many friends on the list of presenters. I won’t try to list them, because there are so many these days that people might feel sad if I don’t mention them. For those that I managed to see, I was pleased to see that the majority of them have lifted their presentation skills since I last saw them, and I happily told them as much. One person who I will mention was Paul White, who travelled from New Zealand to his first PASS Summit. He gave two sessions (a regular session and a half-day), packed large rooms of people, and had everyone buzzing with enthusiasm. I spoke to him after the event, and he told me that his expectations were blown away. Paul isn’t normally a fan of crowds, and the thought of 4000 people would have been scary. But he told me he had no idea that people would welcome him so well, be so friendly and so down to earth. He’s seen the significance of the SQL Server community, and says he’ll be back. It’ll be good to see him there. Will you be there too?

  Read the article

• Fixing a collision detection bug in Slick2D

  - by Jesse Prescott

  My game has a bug with collision detection. If you go against the wall and tap forward/back sometimes the game thinks the speed you travelled at is 0 and the game doesn't know how to get you out of the wall. My collision detection works by getting the speed you hit the wall at and if it is positive it moves you back, if it is negative it moves you forward. It might help if you download it: https://rapidshare.com/files/1550046269/game.zip Sorry if I explained badly, it's hard to explain. float maxSpeed = 0.3f; float minSpeed = -0.2f; float acceleration = 0.002f; float deacceleration = 0.001f; float slowdownSpeed = 0.002f; float rotateSpeed = 0.08f; static float currentSpeed = 0; boolean up = false; boolean down = false; boolean noKey = false; static float rotate = 0; //Image effect system static String locationCarNormal; static String locationCarFront; static String locationCarBack; static String locationCarBoth; static boolean carFront = false; static boolean carBack = false; static String imageRef; boolean collision = false; public ComponentPlayerMovement(String id, String ScarNormal, String ScarFront, String ScarBack, String ScarBoth) { this.id = id; playerBody = new Rectangle(900/2-16, 700/2-16, 32, 32); locationCarNormal = ScarNormal; locationCarFront = ScarFront; locationCarBack = ScarBack; locationCarBoth = ScarBoth; imageRef = locationCarNormal; } @Override public void update(GameContainer gc, StateBasedGame sbg, int delta) throws SlickException { Input input = gc.getInput(); playerBody.transform(Transform.createRotateTransform(2)); float hip = currentSpeed * delta; float unstuckspeed = 0.05f * delta; if(carBack && !carFront) { imageRef = locationCarBack; ComponentImageRender.updateImage(); } else if(carFront && !carBack) { imageRef = locationCarFront; ComponentImageRender.updateImage(); } else if(carFront && carBack) { imageRef = locationCarBoth; ComponentImageRender.updateImage(); } if(input.isKeyDown(Input.KEY_RIGHT)) { rotate += rotateSpeed * delta; owner.setRotation(rotate); } if(input.isKeyDown(Input.KEY_LEFT)) { rotate -= rotateSpeed * delta; owner.setRotation(rotate); } if(input.isKeyDown(Input.KEY_UP)) { if(!collision) { up = true; noKey = false; if(currentSpeed < maxSpeed) { currentSpeed += acceleration; } MapCoordStorage.mapX += hip * Math.sin(Math.toRadians(rotate)); MapCoordStorage.mapY -= hip * Math.cos(Math.toRadians(rotate)); } else { currentSpeed = 1; } } else if(input.isKeyDown(Input.KEY_DOWN) && !collision) { down = true; noKey = false; if(currentSpeed > minSpeed) { currentSpeed -= slowdownSpeed; } MapCoordStorage.mapX += hip * Math.sin(Math.toRadians(rotate)); MapCoordStorage.mapY -= hip * Math.cos(Math.toRadians(rotate)); } else { noKey = true; if(currentSpeed > 0) { currentSpeed -= deacceleration; } else if(currentSpeed < 0) { currentSpeed += acceleration; } MapCoordStorage.mapX += hip * Math.sin(Math.toRadians(rotate)); MapCoordStorage.mapY -= hip * Math.cos(Math.toRadians(rotate)); } if(entityCollisionWith()) { collision = true; if(currentSpeed > 0 || up) { up = true; currentSpeed = 0; carFront = true; MapCoordStorage.mapX += unstuckspeed * Math.sin(Math.toRadians(rotate-180)); MapCoordStorage.mapY -= unstuckspeed * Math.cos(Math.toRadians(rotate-180)); } else if(currentSpeed < 0 || down) { down = true; currentSpeed = 0; carBack = true; MapCoordStorage.mapX += unstuckspeed * Math.sin(Math.toRadians(rotate)); MapCoordStorage.mapY -= unstuckspeed * Math.cos(Math.toRadians(rotate)); } else { currentSpeed = 0; } } else { collision = false; up = false; down = false; } if(currentSpeed >= -0.01f && currentSpeed <= 0.01f && noKey && !collision) { currentSpeed = 0; } } public static boolean entityCollisionWith() throws SlickException { for (int i = 0; i < BlockMap.entities.size(); i++) { Block entity1 = (Block) BlockMap.entities.get(i); if (playerBody.intersects(entity1.poly)) { return true; } } return false; } }

  Read the article

• To Make Diversity Work, Managers Must Stop Ignoring Difference

  - by HCM-Oracle

  By Kate Pavao - Originally posted on Profit Executive coaches Jane Hyun and Audrey S. Lee noticed something during their leadership development coaching and consulting: Frustrated employees and overwhelmed managers. “We heard from voices saying, ‘I wish my manager understood me better’ or ‘I hope my manager would take the time to learn more about me and my background,’” remembers Hyun. “At the same token, the managers we were coaching had a hard time even knowing how to start these conversations.”  Hyun and Lee wrote Flex to address some of the fears managers have when it comes to leading diverse teams—such as being afraid of offending their employees by stumbling into sensitive territory—and also to provide a sure-footed strategy for becoming a more effective leader. Here, Hyun talks about what it takes to create innovate and productive teams in an increasingly diverse world, including the key characteristics successful managers share. Q: What does it mean to “flex”? Hyun: Flexing is the art of switching between leadership styles to work more effectively with people who are different from you. It’s not fundamentally changing who you are, but it’s understanding when you need to adapt your style in a situation so that you can accommodate people and make them feel more comfortable. It’s understanding the gap that might exist between you and others who are different, and then flexing across that gap to get the result that you're looking for. It’s up to all of us, not just managers, but also employees, to learn how to flex. When you hire new people to the organization, they're expected to adapt. The new people in the organization may need some guidance around how to best flex. They can certainly take the initiative, but if you can give them some direction around the important rules, and connect them with insiders who can help them figure out the most critical elements of the job, that will accelerate how quickly they can contribute to your organization. Q: Why is it important right now for managers to understand flexing? Hyun: The workplace is becoming increasingly younger, multicultural and female. The numbers bear it out. Millennials are entering the workforce and becoming a larger percentage of it, which is a global phenomenon. Thirty-six percent of the workforce is multicultural, and close to half is female. It makes sense to better understand the people who are increasingly a part of your workforce, and how to best lead them and manage them as well. Q: What do companies miss out on when managers don’t flex? Hyun: There are high costs for losing people or failing to engage them. The estimated costs of replacing an employee is about 150 percent of that person’s salary. There are studies showing that employee disengagement costs the U.S. something like $450 billion a year. But voice is the biggest thing you miss out on if you don’t flex. Whenever you want innovation or increased productivity from your people, you need to figure out how to unleash these things. The way you get there is to make sure that everybody’s voice is at the table. Q: What are some of the common misassumptions that managers make about the people on their teams? Hyun: One is what I call the Golden Rule mentality: We assume when we go to the workplace that people are going to think like us and operate like us. But sometimes when you work with people from a different culture or a different generation, they may have a different mindset about doing something, or a different approach to solving a problem, or a different way to manage some situation. When see something that’s different, we don't understand it, so we don't trust it. We have this hidden bias for people who are like us. That gets in the way of really looking at how we can tap our team members best potential by understanding how their difference may help them be effective in our workplace. We’re trained, especially in the workplace, to make assumptions quickly, so that you can make the best business decision. But with people, it’s better to remain curious. If you want to build stronger cross-cultural, cross-generational, cross-gender relationships, before you make a judgment, share what you observe with that team member, and connect with him or her in ways that are mutually adaptive, so that you can work together more effectively. Q: What are the common characteristics you see in leaders who are successful at flexing? Hyun: One is what I call “adaptive ability”—leaders who are able to understand that someone on their team is different from them, and willing to adapt his or her style to do that. Another one is “unconditional positive regard,” which is basically acceptance of others, even in their vulnerable moments. This attitude of grace is critical and essential to a healthy environment in developing people. If you think about when people enter the workforce, they're only 21 years old. It’s quite a formative time for them. They may not have a lot of management experience, or experience managing complex or even global projects. Creating the best possible condition for their development requires turning their mistakes into teachable moments, and giving them an opportunity to really learn. Finally, these leaders are not rigid or constrained in a single mode or style. They have this insatiable curiosity about other people. They don’t judge when they see behavior that doesn’t make sense, or is different from their own. For example, maybe someone on their team is a less aggressive than they are. The leader needs to remain curious and thinks, “Wow, I wonder how I can engage in a dialogue with this person to get their potential out in the open.”

  Read the article

• Using Subjects to Deploy Queries Dynamically

  - by Roman Schindlauer

  In the previous blog posting, we showed how to construct and deploy query fragments to a StreamInsight server, and how to re-use them later. In today’s posting we’ll integrate this pattern into a method of dynamically composing a new query with an existing one. The construct that enables this scenario in StreamInsight V2.1 is a Subject. A Subject lets me create a junction element in an existing query that I can tap into while the query is running. To set this up as an end-to-end example, let’s first define a stream simulator as our data source: var generator = myApp.DefineObservable(     (TimeSpan t) => Observable.Interval(t).Select(_ => new SourcePayload())); This ‘generator’ produces a new instance of SourcePayload with a period of t (system time) as an IObservable. SourcePayload happens to have a property of type double as its payload data. Let’s also define a sink for our example—an IObserver of double values that writes to the console: var console = myApp.DefineObserver(     (string label) => Observer.Create<double>(e => Console.WriteLine("{0}: {1}", label, e)))     .Deploy("ConsoleSink"); The observer takes a string as parameter which is used as a label on the console, so that we can distinguish the output of different sink instances. Note that we also deploy this observer, so that we can retrieve it later from the server from a different process. Remember how we defined the aggregation as an IQStreamable function in the previous article? We will use that as well: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); Then we define the Subject, which acts as an observable sequence as well as an observer. Thus, we can feed a single source into the Subject and have multiple consumers—that can come and go at runtime—on the other side: var subject = myApp.CreateSubject("Subject", () => new Subject<SourcePayload>()); Subject are always deployed automatically. Their name is used to retrieve them from a (potentially) different process (see below). Note that the Subject as we defined it here doesn’t know anything about temporal streams. It is merely a sequence of SourcePayloads, without any notion of StreamInsight point events or CTIs. So in order to compose a temporal query on top of the Subject, we need to 'promote' the sequence of SourcePayloads into an IQStreamable of point events, including CTIs: var stream = subject.ToPointStreamable(     e => PointEvent.CreateInsert<SourcePayload>(e.Timestamp, e),     AdvanceTimeSettings.StrictlyIncreasingStartTime); In a later posting we will show how to use Subjects that have more awareness of time and can be used as a junction between QStreamables instead of IQbservables. Having turned the Subject into a temporal stream, we can now define the aggregate on this stream. We will use the IQStreamable entity avg that we defined above: var longAverages = avg(stream, TimeSpan.FromSeconds(5)); In order to run the query, we need to bind it to a sink, and bind the subject to the source: var standardQuery = longAverages     .Bind(console("5sec average"))     .With(generator(TimeSpan.FromMilliseconds(300)).Bind(subject)); Lastly, we start the process: standardQuery.Run("StandardProcess"); Now we have a simple query running end-to-end, producing results. What follows next is the crucial part of tapping into the Subject and adding another query that runs in parallel, using the same query definition (the “AverageQuery”) but with a different window length. We are assuming that we connected to the same StreamInsight server from a different process or even client, and thus have to retrieve the previously deployed entities through their names: // simulate the addition of a 'fast' query from a separate server connection, // by retrieving the aggregation query fragment // (instead of simply using the 'avg' object) var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); // retrieve the input sequence as a subject var inputSequence = myApp     .GetSubject<SourcePayload, SourcePayload>("Subject"); // retrieve the registered sink var sink = myApp.GetObserver<string, double>("ConsoleSink"); // turn the sequence into a temporal stream var stream2 = inputSequence.ToPointStreamable(     e => PointEvent.CreateInsert<SourcePayload>(e.Timestamp, e),     AdvanceTimeSettings.StrictlyIncreasingStartTime); // apply the query, now with a different window length var shortAverages = averageQuery(stream2, TimeSpan.FromSeconds(1)); // bind new sink to query and run it var fastQuery = shortAverages     .Bind(sink("1sec average"))     .Run("FastProcess"); The attached solution demonstrates the sample end-to-end. Regards, The StreamInsight Team

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107  | Next Page >