Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 103/468 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• Internet wireless connected with limited access, windows vista

  - by r0ca

  I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• How does ospf control flooding?

  - by iamrohitbanga

  What method is used by ospf protocol to prevent looping of flooded packets for link state advertisements? The packet header does not contain any timestamp. How do the routers recognize that it is the same advertisement that they sent before?

  Read the article

• How have multiple web servers and IPs on the same physical network

  - by jsigned

  I do web development out of a small office and need to have multiple physical and virtual servers that can be accessed from the internet. I also have a number of devices (computers, laptops, tablets, printers, etc) that need connections as well. I have gotten a subnet of 8 IP's from my ISP and while that is adequate for the web servers its far too small for everything that needs access to the network. My router is an ASUS RT-N16 running DD-WRT. I'm just smart enough about this routing topic to be dangerous, think 2 year old with a magic marker. I would like to keep my internal network NAT'ed on the 192.168.x.x network and route the 68.69.x.x 255.255.255.248 traffic directly to the servers. The physical network consists of the 4 port DD-WRT router and an unmanaged gig switch. I have a fiber connection to the office that works as an Ethernet port. In other words I can plug my laptop directly into it and have access to the internet. There is no login or password and the router is setup to get DHCP from the ISP, and to provide DHCP addresses for the internal network. What I've done so far is google and try different configurations with little success. In the end I decided I didn't even know how to ask the questions needed. My questions are: Is this the best way to configure the network? How do you do it? VLANs? Multiple routers? I've never had to configure a router using anything more than the GUI so if this is command line stuff be gentle.

  Read the article

• CentOS listen to everything on the wire

  - by Poni

  I know there's a native command on linux that will output (to stdout) every "event" related to a certain network interface (be it eth0 etc'). Like there's tail -f <file> to listen on file changes.. I just can't find it. I want to see all events, incoming packets, even dropped ones. At lowest level possible. In every protocol (TCP, UDP etc'). I think WireShark is a bit too big for this as I need something very simple just to see the events, it's for testing. What's the command?

  Read the article

• How to monitor changes in the frequency of network latency spikes over time?

  - by dequis

  I'm currently trying to troubleshoot an issue with my network in which I get latency spikes up to 200 seconds (normally around 50 secs) in an apparently random way at apparently random moments of the day. While trying to find what part of my messy network needs to be blamed (outside of the scope of this question - discussed a bit on chat), I realized I have no reliable way to confirm that a change actually improved anything. So far, the main way in which i notice this is that irssi shows [Lag: 15 (??)] in the statusbar, increasing every 5 seconds, and all other connections seem to be affected too. Since this depends on my observations, it's not a very reliable method to know how often it really happens. Note that just sending ICMP pings is probably not enough, but that's just my guess. It might be a "bufferbloat" issue, it might be packet loss, it might only apply to persistent connections. I suspect this because a few months ago, when the issue started, I had a "ping" command running in background and it didn't show anything weird at all during the latency spikes. This seems to have changed now (pings don't go through), but still, I'd prefer something more robust.

  Read the article

• How to share a USB modem?

  - by allenskd

  Usually I wouldn't have this problem if it was a dsl modem or cable modem but it's really been difficult for me to share this little modem to other computers. Right now I have my laptop connected to a hub, both computers are in the same workgroup and I have "share this computer internet to other computers"... etc. Problem is, I don't know what is currently happening... I'm hoping someone would guide me, I have googled and some people have been successful at sharing the connection but it seems I'm missing something =/ Let me know if you need any details, thanks

  Read the article

• Connecting a Mac to the office network

  - by user36501

  Hi All, I am busy preparing to start working with a Mac at work - in addition to my old PC. Just wondered, is it difficult to setup the Mac to run on the office network - i.e. does it need any special settings or servers or anything like that? and also printers...can I use the network printer as normal. I am just pottrying to think ahead of any ential issues. Also share drives...will I be able to access share drives and my backups to these shares drives - all a bit daunting! Btw in case you didn't notice I am a Mac Nube lol

  Read the article

• Huawei HG8245T Router - not connecting to another router

  - by BubbaK

  I just got a fiber optic connection installed at home and due to the build of the house, it's mostly cement/bricks, the wireless connection isn't received throughout the house. Previously, to combat this issue, I just ran a hardwire from the modem downstairs and upstairs and had it connected to a secondary (DLink) router. It did the job of getting me seamless wireless internet access everywhere. The issue is now with the new Huawei router, this setup isn't working. I have connected everything as previously, but it seems that the other (DLink) routers are not picking up the connection. I have tried everything and am totally lost as what to do to overcome this problem. Any help would be appreciated.

  Read the article

• Dropped connections between Linux Servers in Data Center

  - by Emil H

  I have a number of linux servers at a us-based datacenter. The servers were installed by the hosting company, and are running fedora core. We're experiencing problems with dropped connections. The issue seems to be that when we attempt to connect to one of the other servers after a period of inactivity, the first connection attempt will fail, and sometimes the second. However, after that the connection succeds and it works for a while. This happens for both mysql connections and raw socket connections, but only seems to occur when connecting to some of our servers. The confusing part is that it some of the servers for which we see different behaviors have identical hardware configuration and software. For example, it happens when connecting to a server called mysql2, but not for a server called mysql3. These servers were installed at the same time, but the same specifications. The problem can be reproduced somewhat reliably, but only after waiting fifteen minutes to half an hour. This makes it hard to diagnose, and even harder since I'm not really sure what to look for. I realize that connections sometimes failed, and that we should write our applications to compensate for this but these servers all in the same data center. Why would it matter if two servers haven't communicated for a while? Does anybody have an idea what might be causing this? Is it a server configuration problem or a network problem that I should contact the hosting company about. What do I tell them to look for? Unfortunately our experience has been that the support staff doesn't investigate problems in depth unless we give them detailed directions.

  Read the article

• Monitoring Maximum Process Network Activity

  - by user125973

  We have a collocated server on which we run some OpenVZ hosts. Recently, we have had to pay a lot extra we keep exceeding our bandwidth quota. Our quota is 5 Mb/s but we have spike to almost 50. I looked at the graphs and there are some spikes happening at some intervals. I want to know which process is causing this so I need a tool that monitors the processes and gives me the one with the maximum instant traffic (It doesn't matter how much traffic we have as long as we don't exceed the 5Mb/s quota). Does anyone have a recommendation for this? My hosts are CentOS 5 with OpenVZ so I can see all the containter processes from the host, if that helps in any way.

  Read the article

• TCP/IP Forwarding in Windows Vista and Above

  - by Charles Gargent

  This is the way to do it on XP, but is it possible on Windows Vista and Above? If so how do you detect it? Is there a registry setting for it, or is there com dll or api for it?

  Read the article

• Free IP address management software

  - by TiFFolk

  We are choosing a system for managing our IP address space. So we are looking for a special free software like IPPlan. So what we have nowadays: Ipplan (Beta IPv6 support) SolarWinds IP address tracker (IPv6 support unknown ) IP module of The NOC Project (BTW, take a look of it, seems to be very promising project) (IPv6 support unknown ) phpIP (Does not support IPv6) IP management from RackTables (Does not support IPv6) Do you know about any other special software, like written above? But: No Wiki No DNS No DHCP No spreadsheet Software should provide: Clear view of available addresses Detail listing of all addresses by subnets/search pattern/owners/additional info It must support adding additional info like owner of IP, domain-name, contacts, etc Multi user support Easy interface Software has to be specially written for address management. Scalability Any OS: win, lin, sol, web

  Read the article

• Determining who is running with administrator rights?

  - by Alex C.

  I work at a small non-profit organization with about 55 desktop PCs running Windows XP Pro. The domain controller is running Windows Server 2003. I have a two-part question (note that I'm a bit of a newb when it comes to network administration). Part 1: Is there some simple way that I can determine which accounts are logged in with administrator rights? Part 2: Is there a way that I can remove administrator rights from users without sitting down at each individual machine? Thanks for considering my questions.

  Read the article

• How to send a popup message to unknow computer connected to my WLAN?

  - by Leandro

  Is there any way to send a popup message from a Linux systen to a "random" laptop/tablet/mobile linked to my Wireless network ? For example, if I let my WLAN open and I see a not recognized computer connected to it, is there anyway to send to that device a message ? On the other hand, if I am connected to someone else open network and they may or may not be aware that their network is open, can I send them a message warning that I am accessing their network? Probably for a completely "random" device the answer should be no. But if we restrict to laptops with Win7 or Linux SO is there any service running by default on such systems that allows one to send such popup messages ? PS: I have no practical motivation for this question. This is only a curiosity.

  Read the article

• Virtual machines interconnection inside Proxmox 2.1 Cluster

  - by Anton

  We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

  Read the article

• How can I split 200Mbps of streaming traffic into routers?

  - by Jared

  As the title says, I have 200Mbps of streaming video traffic coming into my command center. How do I split the load between routers? Setup is like this: fiber --- router --- switch --- workstations I'm sorry I haven't dealt with this much traffic before. so please be gentle if you're going to kick me out :) EDITED FOR DETAILS: Okay, this specific project is for our company's IP CCTV system. We have deployed over 100++ cameras all over a building/campus and we have estimated each camera to take about 2Mbps of bandwidth each. Now, they're all connected to a switch and that's entirely fine. But coming into our command center, they have to be on a router since it'll get more than 200++ cameras next year (and I don't want to have too many hosts on one subnet). My plan was to have the 1st hundred on a 172.16.9.x block and the 2nd hundred on a 172.16.10.x block (all /24). The servers I have are currently sized to match (about 5 dual 6-core xeons) and I'd have about 19 workstations all streaming video from the 5 servers. (servers pull video from the cameras). But 200Mbps of constant traffic? How the hell do I even break this up? I need to have 1 gateway, to manage the routes... I honestly think I'm way in over my head.

  Read the article

• netsh doesn't provide commands

  - by Petr Marek

  According to Netsh Commands for Wired Local Area Network (LAN) in Windows Server 2008 and Windows Server 2008 R2, netsh should provide commands such as netsh add profile filename="profile.xml" interface="Local Area Connection" but that's an unknown command for my netsh. Even if I enter netsh show /? it shows me only two options: 'show alias' and 'show helper'. Maybe some library/modules or something is missing? I tested with admin permissions in PowerShell.

  Read the article

• Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

  - by techaddict

  Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

  Read the article

• Set up router to vpn into proxy server

  - by NKimber

  I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives? Any help/suggestions much appreciated. Neil

  Read the article

• Fedora 17 - Can't access remote machine using hostname

  - by Aaron

  I am using Fedora 17 and am trying to access a remote machine (running Fedora 15) using its hostname which isn't working. The machine is right next to me on the same switch as my machine (so they are both on the same network with the same subnet and everything). When I was running Windows (7 32-bit) on my machine I could access the other machine no problem but now that I am running Fedora 17 that's not the case. Is there an additional daemon or something that I need to be using in order for this to work?

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Bonding: works only from one link

  - by Crazy_Bash

  I would like to install bonding with 4 links. but only one of them is active. eth4 is always active. the others simply don't work. those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >