Search Results

Search found 41305 results on 1653 pages for 'ubuntu studio'.

Page 103/1653 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • VirtualBox with Ubuntu Server guest can't ping outside

    - by Danidan
    Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

    Read the article

  • Ubuntu odd mouse and keyboard behavior when window gains inner focus

    - by Scott
    This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

    Read the article

  • Getting dwl-g122 to work on ubuntu

    - by User1
    I have a USB WiFi adapter, D-Link dwl-g122. I'm running Ubuntu 10.4. My laptop has a built-in wireless card that is connecting fine to the router. I plug in the usb and it never really connects. Here are some details: iwconfig wlan1 IEEE 802.11bg ESSID:"\x0B\xE1..." Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on lshw -c network: *-network:1 description: Wireless interface physical id: 3 logical name: wlan1 serial: 00:13:46:8b:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg dmesg [ 1096.814176] wlan1: direct probe to AP xxx (try 1) [ 1096.820960] wlan1: direct probe responded [ 1096.820969] wlan1: authenticate with AP xxx (try 1) [ 1096.823790] wlan1: authenticated [ 1096.823869] wlan1: associate with AP xxx (try 1) [ 1096.827667] wlan1: RX AssocResp from xxx (capab=0x411 status=0 aid=1) [ 1096.827674] wlan1: associated [ 1142.590912] wlan1: deauthenticating from xxx by local choice (reason=3) lsmod|rt2 rt2500usb 19643 0 rt2x00usb 11260 1 rt2500usb rt2x00lib 32133 2 rt2500usb,rt2x00usb mac80211 238896 3 ath5k,rt2x00usb,rt2x00lib cfg80211 148725 4 ath5k,ath,rt2x00lib,mac80211 led_class 3764 3 ath5k,rt2x00lib,sdhci It looks like the driver loads but it doesn't feel like connecting. The behavior is identical even if I blacklist the other wifi card (using an ath5k driver). It's almost like it is using the wrong password or something. Does anyone know what is happening? Is anyone using Ubuntu successful?

    Read the article

  • Primary/secondary ethernet interfaces in Ubuntu 9.10

    - by Josh
    I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local...

    Read the article

  • Ubuntu 12.04 can't boot after installing with software RAID 1

    - by Bill
    I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

    Read the article

  • Visual Studio 2010 tool to order members inside #region

    - by Michael Swan
    There exist a tool for Visual studio which order alphabetically the members grouped by #region ? means #region A1() ... A2() ... A0() ... B1() ... Z1() ... B5() ... #endregion #region C1() ... C2() ... C0() ... D1() ... X1() ... Y5() ... #endregion With that tool, I want like: #region A0() ... A1() ... A2() ... B1() ... B5() ... Z1() ... #endregion #region C0() ... C1() ... C2() ... D1() ... X1() ... Y5() ... #endregion Thank you

    Read the article

  • Publish database between two open database connections (Visual Studio 2005)

    - by danielswe
    I have two data locations, one to a local and one to a remote database. How do I copy the local database schema to the remote? The reason I don't use "Publish to provider" is that I'm not sure that I have all the information necessary to do so. I have the database name, server, username and pass but not "web service address" nor "web service password". I work in Visual Studio 2005. The server is a MSSQL 2005 server. I have tried using the queries but I only get errors doing so.

    Read the article

  • Ubuntu Studio 10.4 boots to terminal mode only

    - by Don
    I did clean install from ISO DVD. It boots only to command line asking for login. After I login I enter STARTX and desktop appears and some of the studd actually works, but there are a lot of problems: there is no way to reboot or shut down except to stopx/logoff and enter shutdown sound system doesn't respond pulse audio volume control gives "connection failed, connection refused" DVD drives not available GDebi Package installer is grayed out and so I can't use it (but synaptic package manager works OK) Software Center won't start when clicked -- it just stops trying DBus cant run because it says /usr/local/var/run/dbus/system_bus_socket file not found (also /var/run/dbus/system_bus_socket file not found) There's just a lot of things wrong and I can't help but think something is missing or was mis-coded in the distro so that there are typos in some script somewhere. If anyone can tell me where to begin to untangle this mess I'd appreciate it, but I think it all begins when it can't start the GUI automatically and I need to enter STARTX.

    Read the article

  • Ubuntu server 10.04 disconnects after short periods of inactivity on my site

    - by user57019
    I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

    Read the article

  • Xamp on ubuntu serves php source for root url only

    - by mazaryk
    Hey, Okay, so installed xamp on my ubuntu machine, started it up and everything worked. Apache ran my php app just fine (including requests to the root url "/"). However, after the first reboot since installing, when I request "http://localhost/" apache serves up the index php page as a phtml source file. All other urls (like "http://localhost/login") work as expected. Backgound: The only modification I made to xamp was to setup a vhost for my app. The app uses an .htaccess file where I define some rewrite rules (the app is an MVC framework and all urls are rewritten to a single entry point php file). I'm using Xamp because I need php = 5.3.0. I know apache will serve up the source of a php file when it doesn't know to process php files. But the config does indeed have "AddType application/x-httpd-php .php" and as I said, the app works for all urls except the root "/" (and only since I've rebooted). The .htaccess file does contain a DirectoryIndex directive. xamp 1.3.7a Ubuntu 9.10 Any ideas?

    Read the article

  • Quick Replace in Visual Studio 2010 fails to use Tagged Expression n

    - by slomojo
    I'm trying to do some basic regex Quick Replace operations in Visual Studio 2010, but when I use regex grouping I don't get Tagged Expressions (ie. \1 \2 etc.) returning their values, instead they are blank. For example: Text int a = int.Parse("10"); int b = int.Parse("20"); int c = int.Parse("30"); Search Pattern (regex enabled) int\.Parse\("([0-9]*)"\); Replace \1; Replaced Text int a = ; int b = ; int c = ;

    Read the article

  • ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

    - by xyious
    I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

    Read the article

  • Visual Studio 2012 window border leaks onto other screen

    - by chrisstuart
    I have several 30" monitors and as a result, I use the Win+Left/Right to tile windows to the left and right side of each screen. I've noticed an annoying feature of Visual Studio 2012 is that it seems to "leak" onto the next screen. I can see a line on the adjacent screen as if the edge of the window is slightly over the border. Anyone else see this? Is it a bug? This is on Windows 7 64 bit. I've never seen this with any other application.

    Read the article

  • Ubuntu server 10.04 disconnects after short periods of inactivity on my site

    - by Melot
    Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

    Read the article

  • Visual Studio 2012 intermittent lockup

    - by user1892678
    Visual Studio 2012 intermittently locks up on me. I notice that devenv.exe jumps to 50% CPU utilization. The CPU stays at this level for a few minutes and then drops. While its at 50% utilization I can still use the IDE. However, intermittently it stops responding (as though it was performing some sort of background process). It only lasts for a few seconds. Also this happens when debugging. I'm running under Windows 7 and I'm using Telerik controls. I've disabled add-ins and extensions and have had no success. Any ideas would be appreciated? Thanks

    Read the article

  • Ubuntu 9.10 won't reboot after replacing a failed drive

    - by user149041
    Hello Serverfault community. I hope someone can shed light on a peculiar problem I am having with an Ubuntu 9.10 server install. I am not a Linux expert but have the responsibility of fixing the box if something goes wrong. DOH! I have Ubuntu 9.10 server installed on on a desktop platform: Compaq Presario SR5027CL. There are two 1TB SATA drives configured in a RAID 1 array; I use the box as an email backup server for a small group of users. Last week one of the drives failed and was replaced with a new drive of the same type. The problem I have been having is getting the box to reboot after a restart or a shutdown halt. The OS and the RAID 1 array are on the same drives that make up the RAID 1 array. The replacement drive (sda) was added to the box and the partitions were created to match the existing good drive (sdb). The array is made up of sda1 and sdb1. I found an interesting point while checking the BIOS settings: there is a "HDD Boot Group Priority" section, and the new drive was selected as the "1. 3rd master"; the server wouldn't boot configured like that, but when I set the old drive to be "1. 4th master", the box will reboot. I'm checking some more things, but I would certainly appreciate any useful information. Thanks in advance.

    Read the article

  • VS 2008 Service Pack 1 problem

    - by Compiler
    Hi, My OPS is XP and service pack 3 installed.I cant install vs2008 service pack1,In log file i see 'Visual C++ 2008 SP1 Design-Time Components for x86 - KB947888' cant be installed. Error code is 1603.Last part of Installation file is here. Returning IDOK. INSTALLMESSAGE_ERROR [Error 1335. The cabinet file 'patch.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.] [1/12/2009, 10:14:50] (IronSpigot::MsiExternalUiHandler::UiHandler) Returning IDOK. INSTALLMESSAGE_ACTIONSTART [Action 10:14:50: Rollback. Rolling back action:] [1/12/2009, 10:17:29] (IronSpigot::MspInstallerT<class ATL::CStringT<unsigned short,class ATL::StrTraitATL<unsigned short,class ATL::ChTraitsCRT<unsigned short ::PerformMsiOperation) Patch (C:\DOCUME~1\Cem\LOCALS~1\Temp\Microsoft Visual Studio 2008 SP1\VS90sp1-KB945140-X86-ENU.msp; C:\DOCUME~1\Cem\LOCALS~1\Temp\Microsoft Visual Studio 2008 SP1\VC90sp1-KB947888-x86-enu.msp) install failed on product (Microsoft Visual Studio 2008 Professional Edition - ENU). Msi Log: Microsoft Visual Studio 2008 SP1_20090112_100005671-Microsoft Visual Studio 2008 Professional Edition - ENU-MSP0.txt [1/12/2009, 10:17:29] (IronSpigot::MspInstallerT<class ATL::CStringT<unsigned short,class ATL::StrTraitATL<unsigned short,class ATL::ChTraitsCRT<unsigned short ::PerformMsiOperation) MsiApplyMultiplePatches returned 0x643

    Read the article

  • Ubuntu error: no candidate ver

    - by codedude
    Ok...so for some reason by Ubuntu 10.04 partition won't startup anymore. I'm not exactly sure what I did. I have the feeling that I accidentally removed some important packages. However, when I startup in Recovery Mode and select "dpkg: repair broken packages" I get this output: rm: cannot remove /var/lib/apt/lists/partial/*': No such file or directory rm: cannot remove/var/cache/apt/archives/partial/*': No such file or directory Reading Cache Reading Package lists: Done Reading State Information: Done Reading State Information: Done Reading State Information: Done No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: libpulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: libwvstreams4.4-base No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libee12-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: lipulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libeel2-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 Your system is up-to-date There are no upgrades available for your system. The upgrade will now be canceled. Do you want to start the upgrdae? Continue [yN] Details [d] (Sorry that is so long...) I'm assuming I'm missing each of those packages. However, when I try to install them, for example: sudo apt-get install libisc44 I get some response that this package is missing and/or it may be part of another package. I'm not exactly sure what I should do. I don't want to reinstall ubuntu, since I have it dual booted with Windows Vista and I don't want to risk anything on the Windows partition. What are your thoughts? EDIT: I've posted this on Ubuntu Forums and nobody ever responded so...yah

    Read the article

  • Ubuntu error: no candidate ver

    - by codedude
    Ok...so for some reason by Ubuntu 10.04 partition won't startup anymore. I'm not exactly sure what I did. I have the feeling that I accidentally removed some important packages. However, when I startup in Recovery Mode and select "dpkg: repair broken packages" I get this output: rm: cannot remove /var/lib/apt/lists/partial/*': No such file or directory rm: cannot remove/var/cache/apt/archives/partial/*': No such file or directory Reading Cache Reading Package lists: Done Reading State Information: Done Reading State Information: Done Reading State Information: Done No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: libpulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: libwvstreams4.4-base No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libee12-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: lipulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libeel2-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 Your system is up-to-date There are no upgrades available for your system. The upgrade will now be canceled. Do you want to start the upgrdae? Continue [yN] Details [d] (Sorry that is so long...) I'm assuming I'm missing each of those packages. However, when I try to install them, for example: sudo apt-get install libisc44 I get some response that this package is missing and/or it may be part of another package. I'm not exactly sure what I should do. I don't want to reinstall ubuntu, since I have it dual booted with Windows Vista and I don't want to risk anything on the Windows partition. What are your thoughts? EDIT: I've posted this on Ubuntu Forums and nobody ever responded so...yah

    Read the article

  • While try to open the project - getting error.

    - by Gopal
    Using Visual Studio 2008 I have .net file name like UPS.Tek, version - Visual Studio 2005 C# files are UPSReport.cs (Visual C# Source File) UPSConn.Cs (Visual C# Source File) UPSBase.cs (Visual C# Source File) ...., When i try to open the C# files individually in VS 2008, the C# files are opening But When I try to open this UPS.Tek in Visual Studio 2008, It showing error as "make sure the application for the project type .csproj is installed" How to solve this error.

    Read the article

  • Waiting for a background operation to complete

    - by JohnHenry
    I have been suffering from the all too common 'Waiting for a background operation to complete...' message in Visual Studio 2012 (Professional) for a while now but it has been fairly sporadic. Lately though, I am really struggling to use Visual Studio as pretty much whenever i try and do anything with any Razor views (mostly clicking to move the cursor) visual studio hangs and the above message appears for about a minute at a time. (If when its finished doing stuff i then click in the view again, the process repeats, and repeats, and repeats.....) I have searched high and low, and read loads of articles regarding this and peoples suggestions and tried changing indentation settings, resetting settings, etc but none have worked. Has anyone come across something else that may work as this is seriously impeding my ability to use visual studio and sadly provoking much cursing.

    Read the article

  • Installed Ubuntu 12.04.01 with Windows XP but lost access to Windows XP

    - by Bob D
    The First time I tried to install Ubuntu the installer installed it on my D drive. This resulted in only booting to Windows XP with no access to Ubuntu. I had to download a disk partitioning program to undo all of this. A tip from the Internet said to create a partition on the C drive for Ubuntu, so I did along with a Swap Partition. I did this manually because the installer on the CD would not do so and would not let me do so from within the installer program. With the fresh partitions created for Ubuntu I let the installer do its thing. The computer rebooted and came up in Ubuntu. I then installed WINE and all was well. Then I shut the computer down for the night. The next day I turned on the computer and it booted directly into Ubuntu. I can see the Windows partition and all the files but it will not allow me to switch to the Windows XP OS. Does not even give me a choice to do so. I have reinstalled Ubuntu several times and each time is the same, I cannot access Windows XP anymore. Right now I am in a fresh install with only whatever the installer installed. How do I fix this?! I have tried the hold the shift key to see if something called GRUB shows up, but no. I tried shifting the order of boot in GRUB but that did not work either. I tried using EasyBCD but that will not run. One symptom I do not understand, my monitor will post a graphic when the computer reboots that the cable is disconnected, this is normal. Then when the computer gets to the actual boot process it will display the splash screens etc and it did this for Windows XP as well. But now something new has popped up, while booting Ubuntu after where it probably should be showing me a menu to pick what OS I want to boot, the monitor posts "Input Unsupported" until Ubuntu loads. I have never seen it post this before, maybe a clue to someone.

    Read the article

  • How to uninstall Ubuntu 12.04 LTS ( installed alongside Win 7 from Boot CD)

    - by Mohammad Yaseen
    A few days back I installed Ubuntu 12.04 alongside windows. When I put the CD in, the setup said that I should boot from CD and then I can choose from demo to install Ubuntu alongside Windows, I followed the instruction and selected Install alongside Windows 7 from the setup wizard. My Win 7 drive is originally 60 GB but after installing Ubuntu it appears as if it were 43 GB. Now I want to UNINSTALL Ubuntu and get just Win 7 back on. Please guide me how to do this. Presently, at start-up I get a choice to Boot either into Win 7 or Ubuntu. I am new to Ubuntu and Linux both! This is the partition layout as seen on Win 7 :

    Read the article

  • Installing Ubuntu 14.04 on macbook pro EFI

    - by user279771
    Macbook pro: mavericks, 5.2, graphics: nvidia geforce 9600M I followed the guides from here: https://help.ubuntu.com/community/UEFIBooting#Detect_.28U.29EFI_firmware_processor_architecture and http://www.rodsbooks.com/ubuntu-efi/. What I have is the following: /dev/sda apple partitions /boot / (root) swap When installing ubuntu, I did not install the boot loader during installation but did so in a chroot environment after installing grub-efi. I installed grub to /dev/sda1 (efi) which created the grub64.efi file in efi/ubuntu. This allows the refined boot manager to bring up grub and select ubuntu however, the graphics does not work. Even after adding nomodeset and removing quiet/splash from the kernel parameters. Any ideas on what could be wrong? To be clear, if I remove quiet/splash, I can see all the text startup messages being printed out however, the display manager doesn't appear to start (the screen stays black). Oddly enough though, the ubuntu startup sound can be heard.

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >