Search Results

Search found 38458 results on 1539 pages for 'remote access'.

Page 1038/1539 | < Previous Page | 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045  | Next Page >

• Advise on a 240,000 sqft outdoor wireless network

  - by whlspacedude

  I would be very appreciative of some advice in the purchase of equipment to provide a wireless network that covers the entire area of an outdoor arena. The area is rectangular-ish in shape. 400ft wide and 600ft long. It has 6 light towers, 1 on each of the 400 foot ends and 2 on each of the 600 foot ends. I can mount on anything and spend as much money as needed. The needs of the network would be to provide access for, up to 15 wireless HD cameras with audio, and a public-wifi network. Can someone point me in the right direction as far as equipment and antennas ? I can provide any additional information that you may need.

  Read the article

• How to use an USB digitizer?

  - by Magnetic_dud

  Hello, i am in China now, and when i saw an USB digitizer (resistive), i bought it, thinking that i could be used as a mouse. When i connect it to my windows 7 rc1 laptop, the system properties says "pen input available" But, nothing happens when i touch the panel... i installed the bundled drivers, in chinese only, and NOT in unicode (so the text is garbled) When i install the driver, i get access to a special key on the tablet, "switch from pen input to mouse", and the driver will move the pointer according to the position on the tablet. (but no click) If i use the "pen mode", the computer will use a special chinese IME that is very awkard, i want to use the microsoft ime, and be able to draw/take notes on the screen There are "generic" drivers? Or just a plain mouse driver that will click when i press on the surface The tablet name is "qiancai"

  Read the article

• Synergy 1.3.6 on Windows 7 Test not working

  - by Joel Avery

  So I have the client running, says perfectly connected to server when I run a test I run the same test on the server and it just says "running test. press stop to end test" and no output log file comes up like on the client. Then I stop the test it says synergy is about to quot with errors and warnings. Please check the log then click OK. Except for the log didnt come up and I don't know how to access the log from command prompt. And I'm pretty sure my thing is set up correct: section: links Joel-HP: left = JoelPC2 JoelPC2: right = Joel-HP end My Windows 7 64 bit server is on the right, Windows 7 32 bit client on left Both client and server are run as admin.

  Read the article

• PHP + IIS Application Pool Identity Windows\Temp permissions

  - by Matt Boothman

  I am currently running PHP (5.3) on IIS 7.5 on a Win2k8 R2 Web Edition Server and would like to know what, if any, problems or security vulnerabilities I may introduct into a system by assigning Read, Write, Modify & Execute permissions to either IUSR account or the IIS_USERS group for %SystemRoot%\Temp? Should I be altering permissions to that folder at all (as Windows reminds me I probably shouldn't when i attempt to change them)? Should I create a temp folder somewhere else and set permissions accordingly? The problem is when i set Anonymous Authentication (I'm guessing is a more secure option???) to use the App Pool identity, when starting sessions PHP gets stuck in a loop because it's unable to create session files in the %SystemRoot%\Temp folder due to lack of permission on the application pool user or IIS_USERS group. Another problem being ImageMagick (PHP Extension) is being denied access to %SystemRoot%\Temp to write temporary files so is throwing exceptions. I have tried searching Google however have not found anything that touches upon this subject specifically. Any help greatly appreciated.

  Read the article

• Apache not directing to correct VHost

  - by BANANENMANNFRAU

  I have setup the following virtual host ServerAdmin [email protected] ServerName mysite.com ServerAlias www.mysite.com DocumentRoot /var/www/homepage/public_html ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined When I hit my url Apache still shows the default page. Not the index Ive created in the give Document root. In my Domain i have set the A Record to the Ip of my VPS: apache2ctl -S: output: VirtualHost configuration: *:80 is a NameVirtualHost default server xxxxxx.stratoserver.net (/etc/apache2/sites-enabled/000-default.conf:1) port 80 namevhost xxxxxxx.stratoserver.net (/etc/apache2/sites-enabled/000-default.conf:1) port 80 namevhost mysite.com (/etc/apache2/sites-enabled/homepage.conf:1) alias www.mysite.com ServerRoot: "/etc/apache2" Main DocumentRoot: "/var/www" Main ErrorLog: "/var/log/apache2/error.log" Mutex default: dir="/var/lock/apache2" mechanism=fcntl Mutex mpm-accept: using_defaults Mutex watchdog-callback: using_defaults PidFile: "/var/run/apache2/apache2.pid" Define: DUMP_VHOSTS Define: DUMP_RUN_CFG User: name="www-data" id=33 not_used Group: name="www-data" id=33 not_used How would I need to setup my Virtual host so that apache shows the correct site depending on the Domain im redirecting from.

  Read the article

• making cookies persistent in IE8

  - by Jamie Stevens

  There's a website I sign into frequently, and I'm getting sick of entering my username and password every time. The website can remember who I am so long as I don't close my browser (Internet Explorer 8), but when I do it forgets me, and asks me to login again. I'm guessing this is because it's using a cookie (and perhaps a session) that expires when I close my browser. Is there anyway to make this information persistent across each time I load my browser? (I tried exporting the cookies to a file, and then importing them as soon as the browser was reloaded, but that didn't work either... I'm thinking the cookie text file needs to be modified somehow.) (FYI The website is http://blackboard.unh.edu, but you won't have access unless you happen to be a student there :-) NOTE: I'm not interested in using any password remembering features in the browser. The only solution I'm open to is making the cookie / session persistent somehow!

  Read the article

• reverse proxy only from one internal server

  - by hrost

  I have configured a reverse proxy and is working ok for one internal server, for example our mail server. Now, I like to know if it is possible to configure a reverse proxy for only one server /application (in this case our web intranet). Our problem is Intranet call another aplication inside same intranet server and another internal servers, and the only way that I know to publish this resources is make a reverse proxy in our dmz apache for all apllications servers, but I like that from our DMZ reverse apache only intranet will be called, and other applications will be called by intranet server, and not reverse proxy. I like to configure with this system for security reason, and only allow external access to one server. I have configured With Debian Squeeze and apache 2.2 It is possible? How?

  Read the article

• Check IMAP via PHP for mesages in order to interact with them via PHP?

  - by Roger

  I use Google to administer my e-mails and I run Nginx + PHP. If I want to check incoming mail to interact with each message subject (to trigger an action), as far as I know, I have only two options: 1) access Google via IMAP PHP / cron job or 2) forward the messages to my server where I can have a subdomain set to pipe the messages to a PHP script. Frankly, I'd preffer the first option because I have already all the IMAP functions tested and done. And if the second solution is really the best, I'd preffer to use Postfix. However, id like some light grom somebody who has already browsed this unknown waters. Thank you.

  Read the article

• Using wget to recursively download whole FTP directories

  - by user9406

  I want to copy all of the files and folders from one host to another. The files on the old host sit at /var/www/html and I only have FTP access to that server, and I can't TAR all the files. Regular connection to the old host through FTP brings me to the /home/admin folder. I tried running the following command form my new server: wget -r ftp://username:[email protected] But all I get is a made up index.html file. What the right syntax for using wget recursively over FTP?

  Read the article

• Intraforest user account merge with Active Directory

  - by Neobyte

  I have a scenario where there is a root domain (RD) and two child domains (CD1 and CD2). Users have accounts on both CD1 and CD2, with identical samAccountNames, names etc, and various applications either use the CD1 or CD2 account for authentication to resources. I need to collapse CD2 into CD1, so I want to merge the accounts together. However ADMT does not allow me this option (merge options are greyed out), I think because it does not support intraforest merge of accounts (although it does not explicitly state this anywhere in the documentation). My question is - what is the easiest way for me to merge these accounts? Ultimately all I really need (I think) is for the SID of CD2\user1 to be added to the SIDHistory of CD1\user1 - is there a tool that supports this? Computer accounts and profiles are not a concern for this scenario. Group migration is unlikely to be an issue either - CD2\user1 is usually granted resource access through membership of a group on CD1.

  Read the article

• Sending from alternative addresses in Exchange

  - by Sam Cogan

  One of the most frequent requests I get from users with Exchange, is to be able to send from one of their alternative email addresses, that is one of the addreses there account is configured with in Exchange, but that is not their primary address. Unfortuantely as far as I am aware Microsoft have not yet come up with a solution to this. I've used a number of hacks to get round this, sepearate accounts with POP3 access, Using the from field in outlook, but each have there draw back. What have you used in these situations to allow the use of these alternative addresses?

  Read the article

• Two mail servers, need help with dns configuration for the backup one

  - by user92231

  I need to run a redundant backup mail server in case the main one goes down. The settings in GoDaddy look something like the following: A (Host) Host Points to @ ip address of mail1 41.x.x.x mail1 ip address of mail1 41.x.x.x mail2 ip address of mail2 196.x.x.x MX Priority host points to 10 @ mail1.mydomain.com 20 @ mail2.mydomain.com When mail1 goes down, mail2 is able to get emails. I can access it through the browser with no problem, but I want my users to able to pop3/smtp as well without changing anything in their outlook. I dont want any impact to the users when mail1 is down. Also, I'm using the windows server DFS to keep both folders of the mails in sync. Is this the right way, or should I be using something else?

  Read the article

• How to solve my black screen at boot?

  - by Juanillo

  I've got a friend with a weird problem. When he starts his computer the screen is completely black until the computer is completely started. So the screen is black until it suddenly shows the Windows desktop. He said that this is happening since a technical service repaired his computer, but that repair is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to BIOS or start in safe mode (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it mustn't be configured in this way in the BIOS). Maybe there´s a problem with the hardware (maybe the graphic card)? Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it?

  Read the article

• Why won't IE let users login to a website unless in In Private mode?

  - by Richard Fawcett

  I'm not entirely sure this belongs on SuperUser.com. I also considered ServerFault.com and StackOverflow.com, but on balance, I think it should belong here? We host a website which has the same code responding to multiple domain names. On 28th December (without any changes deployed to the website) a percentage of users suddenly could not login, and the blank login page was just rendered again even when the correct credentials were entered. The issue is still ongoing. After remote controlling an affected user's PC, we've found the following: The issue affects Internet Explorer 9. The user can login from the same machine on Chrome. The user can login from an In Private browser session using IE9. The user can login if the website is added to the Trusted Sites security zone. The user can NOT login from an IE session in safe mode (started with iexplore -extoff). Only one hostname that the website responds to prevents login, the same user account on the other hostname works fine (note that this is identical code and database running server side), even though that site is not in trusted sites zone. Series of HTTP requests in the failure case: GET request to protected page, returns a 302 FOUND response to login page. GET request to login page. POST to login page, containing credentials, returns redirect to protected page. GET request to protected page... for some reason auth fails and browser is redirected to login page, as in step 1. Other information: Operating system is Windows 7 Ultimate Edition. AV system is AVG Internet Security 2012. I can think of lots of things that could be going wrong, but in every case, one of the findings above is incompatible with the theory. Any ideas what is causing login to fail? Update 06-Jan-2012 Enhanced logging has shown that the .ASPXAUTH cookie is being set in step 3. Its expiry date is 28 days in the future, its path is /, the domain is mysite.com, and its value is an encrypted forms ticket, as expected. However, the cookie is not being received by the web server during step 4. Other cookies are being presented to the server during step 4, it's just this one that is missing. I've seen that cookies are usually set with a domain starting with a period, but mine isn't. Should it be .mysite.com instead of mysite.com? However, if this was wrong, it would presumably affect all users?

  Read the article

• How to store 250TB of data and develop a backup/recovery plan?

  - by luccio

  I'm really new to this topic, so big apology for stupid questions. I have a school project and I want to know how to store 250TB of data with life-cycle for 18 months. It means every record is stored for 18 months and after this period of time can be deleted. There are 2 issues: store data backup data Due to amount of data I will probably need to combine data tapes and hard drives. I'd like to have "fast" access to 3 month old data, so ~42TB on disk. I really don't know what RAID should I use, or is here any better solution than combining disk and data tapes? Thanks for any advice, article, anything. I'm getting lost.

  Read the article

• Configure ubuntu 12.10 to share internet through second NIC with subnetwork

  - by Dan Smith

  I have an Ubuntu 12.10 box with 2 NICs. eth0 is connected to my 192.168.1.X network, which is connected to my home router and out to the internet. I want the other interface, eth1,to support 10.0.0.x and allow devices on that network to access the internet through my ubuntu box. I do not need dhcp on the 10.0.0.x network. Here's a schematic: Internet --- home router ---- ubuntu[eth0:192.168.1.x, eth1:10.0.0.x] --- [10.0.0.x device] How do I configure the ubuntu box to share the internet with devices on that subnetwork? Thanks!

  Read the article

• How to choose which fields are available via LDAP from an Active Directory

  - by Felix Eve

  I'm using PHP to do an ldap search and then pull the attributes out using ldap_get_attributes. This returns an array of data (that can be seen here) however there are some fields that are missing such as Organization Title, department, company, address and telephone number. How to I make these fields available? There is a similar question here: http://www.petri.co.il/forums/showthread.php?t=15227 I've followed the steps outlined there an tried changing some access permissions but am not really sure what I'm doing and can't see any permissions that directly relate to the fields that I can see when I edit a user in the "Active Directory Users Computers" window. I am a PHP developer, not a Windows server administrator so am finding configuring an AD rather challenging so please don't assume any level of knowledge about AD. I've asked the same question on stack exchange but understand this is a more relevant place to ask.

  Read the article

• Folder permissions, red x on user object

  - by Matt Bear

  This question was asked before but was no answer. On shared folders on the file server, for the domain user name object under the security tab, the icon has a red x. There are no symptoms, the users have full access, there is just a red x on the icon for their name. Why is this? For clarification, logged into the windows 2008 r2 file server, browse to a users shared folder, right click on the folder, hit properties, click the security tab. The object representing the users domain name has a little red x on the lower right hand corner of the icon that looks like a single man. There are no symptoms beyond me wondering why the red x is there.

  Read the article

• DOS Batch file to find "new" files by date

  - by Todd McArthur

  My PC has entered an infinite BSOD loop - but I do have access to a safe-mode command prompt. I'm trying to get an idea of "what changed" that might have triggered this. e.g. I might have gotten a virus, or an app update went belly up. I'd like to thus see which files were created/modified in the last few days/week or at least the *.exe, *.dll, *.com, *.bat etc. I thought I was ok with my Batch-fu but I'm stumped on how to write a quick batch file/command that would list the files for me. REM This will find the files, but the results are all muddled REM all EXE files, reverse sort by date, recursively through sub-directories dir *.exe /O-D /S What I'd really like is to find all (executable filetypes) that were created/modified in the last 3-7 days. Can anyone point me in the right direction?

  Read the article

• Cisco IOS router config -- how to disable SSH / SNMP on all but loopback address?

  - by chris

  Sorry for the naive question; a quick reading of the cisco docs doesn't answer this question... So I've got a router (say for the sake of argument a 4500 running IOS 15.x) It has interfaces in 3 different subnets -- 10.0.0.1/24, 10.0.1.1/24, and 10.0.2.1/24 It also has a loopback address of 172.16.0.33 How do I make it so that SSH / SNMP and other administrative traffic works on the 172 address but doesn't work on the IP addresses I wish to only use for L3 forwarding? Ideally this can be done by disabling the control plane access to these interfaces not just by using an ACL, but whatever, I don't actually care that much as long as it works... Thanks!

  Read the article

• Windows Server vs Sharing

  - by Mark Lawrence

  Not sure if this is the right place for this question. I have a friend that owns a small business running 3 local machines, that are connected to the internet, and a server that each local machine connects to. He has recently bought a newer server, and by server I mean a Windows Vista box. He wants to use this purely to store data that the 3 local machines can access, kind of like a glorified external hard drive. Im suggesting to fore-go the server option and simply setup sharing on the 'server' box. Interested in hearing any suggestions as to whether the server idea is preferable?

  Read the article

• dns hierarchy not working !! Please help

  - by nikhilelite

  (DNS1 ,WWW1, Gateway1) (sub-internal network) (DNS0,WWW0,Gateway0) (internal network) DNS1: 192.168.250.3/24 WWW1: 192.168.250.4/24 Gateway1: 192.168.250.1 /24 (internal) :: 192.168.0.150 to 192.168.0.175 (external) DNS0:192.168.0.197/24 WWW0:192.168.0.197/24 Gateway0: 192.168.0.1 (internal) :: 69.94.x.x (external, dynamic ,isp control) Expected behavior: When using dig from internal (192.168.250.0/24) hosts, and query about domain from 192.168.0.197/16 nameserver's hosts (for which its authoritative) , it should return the ip address. Whats happening: After dig, answer section empty, the query is trying to access a.root server instead of 192.168.0.197 ,even though i have defined 192.168.0.197 as dns in gateway1's resolv.conf Why? I need this working asap, can anyone here help ?

  Read the article

• 2wire modem to linksys router

  - by Imajica666

  I want to hook a Linksys router to my 2wire modem/router (2701HG-b) to share my Internet connection. I ran from an open port from the 2wire to the WAN port of the Linksys but it will not work. I did this before with my cable modem to a router to my Linksys router. It worked then but not now. I read I can turn the 2 wire into a modem only but I need the 2wire wireless access also. IPCONFIG /ALL sees the 2wire with IP info as well as DHCP server/gateway. Any ideas?

  Read the article

• Hiding a HTTP Auth-Realm by sending 404 to non-known IPs?

  - by zhenech

  I have an Apache (2.2) serving a web-app on example.com. That web-app has a debug-page reachable via example.com/debug. /debug is currently protected with a HTTP basic auth. As there is only a very small user-base who has access to the debug-page, I would like to hide it based on IP address and return 404 to clients not accessing from our VPN. Serving a 404 based on IP-address only is easy and is described in http://serverfault.com/a/13071. But as soon I add authentication, the users see a 401 instead of a 404. Basically, what I need is: if ($REMOTE_ADDR ~ 10.11.12.*): do_basic_auth (aka return 401) else: return 404

  Read the article

• How to uninstall AMD Display Driver from other install of Windows

  - by nar

  So my Windows 7 had a BSOD from an Ati driver file then restarting only gives me some wierd coloured lines at the top of the screen. Starting in safe mode causes the boot up to freeze at AtiPcie.sys and overlays the same coloured lines on the safe mode start up display. It seems to be a problem with the display driver but I can't get into the OS at all to uninstall it. Luckily I have an old install of Windows 7 from when I moved to a SSD still on my HDD and that runs just fine so I'm pretty sure its a software problem (Maybe the SSD corrupted a driver file or something). So does anyone know how I can uninstall the driver files from another Windows 7 install on the same PC? EDIT: What I mean is, I'm running on the broken PC right now but using a different HDD's windows install. I have full access to the not booting up OS drive with the Windows so I can delete any files/load the registry etc...

  Read the article

< Previous Page | 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045  | Next Page >