Search Results

Search found 46442 results on 1858 pages for 'aaa super'.

Page 104/1858 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • Port forward to different port number

    - by ThatGuyYouKnow
    I have a router that sets up rules like so: TCP Any -> 5800 Any -> 5900 UDP Any -> 5800 Any -> 5900 Computer: ip-address This would allow someone 'outside' to connect to my router's port 5800 and 5900 and forward that to the same port on my computer. My issue is that I want the 'outside' port to be different without changing the port on my computer.

    Read the article

  • how to open multiple projects into the CAST IRON integration tool?

    - by MIshal Shah
    Hi, I am learning the cast iron tool (http://www.castiron.com/) which is widely used now a days for integration purpose,but i can only open 1 project and if i want to open the other project at the same time than i have to close the 1st project and after that able to open the 2nd project. So many times i have to open 2 projects at the same time but i dont know in which way i can open the projects ? can any body give me any urgent solution for the same to open the multiple projects at the same time and to switch between them ? Thanks, Mishal Shah

    Read the article

  • Ubuntu/Nvidia lists DVI dual cable as single

    - by Joseph Mastey
    I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

    Read the article

  • disparity between `top`'s given CPU % and process CPU usage total

    - by intuited
    I've noticed that there are sometimes (large) differences between the reported total CPU usage and a summation of the per-process CPU utilization given by apps like top and wmtop. As an example: I recently ran a git filter-branch --index-filter on a fairly large repo, with the index-filter command piping git ls-files through a grep filter and into xargs git rm --cached. This took a few minutes to run; while it was going I noticed that both wmtop and top were displaying a high (above 50% on my 2-core machine) total CPU usage, but that neither showed any individual processes which were using a significant amount of CPU time. Are some processes not shown in the process list? What sorts of processes are these, and is there a way to find out how much CPU time they are using?

    Read the article

  • TF2 with Parallels on a MacBook Pro

    - by Eric Koslow
    I am trying to get TF2 to run under Parallels on my 15'' MacBook Pro, but it is ultimatly failing. To get any decent frame rate I have to put all the setting to low, but even then I get weird graphical "gliches" when I play. Controlls are unresponsive and very laggy as well. I have increased the video memory to 256mb, but that doesn't seem to have helped. What else should I do to make the game playable?

    Read the article

  • How to adjust and combine multiple lower quality photos into one better using FOSS?

    - by Vi
    I have multiple noisy photos (caputed without tripod) that needs to be adjusted (moved/rotated) and averaged. How it's better to do it in Linux with FOSS console-based programs? Current way is something like: mplayer mf://*.JPG -vo yuv4mpeg:file=qqq.yuv transcode -i qqq.yuv -y null -J stabilize=maxshift=500:fieldsize=100:fieldnum=6:stepsize=50:shakiness=10 transcode -i qqq.yuv -J transform=smoothing=100000:sharpen=0:optzoom=0 -y raw -o www.yuv mplayer www.yuv -vo pnm gm convert -average 0*.ppm q.ppm i.e.: Convert photos to video Apply Transcode's "Stabilize" filter Convert the video back to images Average the images. It works, but bad: photos still not perfectly adjusted and the whole sequence is very slow. What is better way of doing it?

    Read the article

  • rpm file conflict after alien conversion

    - by Zitrax
    I have a program for which I generate a .deb file. The .deb file works fine on the systems I have tried it on (also tested with lintian). Previously it has worked to use alien to convert this to .rpm and install it on Suse. However it is now about a year since I tried it the last time and now I get an error when trying to install the alien made rpm on Fedora 11, I get this error: file /usr/share/icons/default.kde from install of testpkg-0.2-2.i386 conflicts with file from package kdelibs3-3.5.10-13.fc11.1.i586 Listing the content of the rpm file: $ rpm -qlp testpkg-0.2-2.i386.rpm / /usr /usr/games /usr/games/testpkg /usr/lib /usr/lib/libfmod-3.75.so /usr/share /usr/share/app-install /usr/share/app-install/icons /usr/share/app-install/icons/testpkg.png /usr/share/applications /usr/share/applications/testpkg.desktop /usr/share/doc /usr/share/doc/testpkg /usr/share/doc/testpkg/changelog.gz /usr/share/doc/testpkg/copyright /usr/share/games /usr/share/games/testpkg /usr/share/games/testpkg/images /usr/share/games/testpkg/images/bb.dat /usr/share/games/testpkg/images/bb_bg.dat /usr/share/games/testpkg/images/bubblemad_8x8.png /usr/share/games/testpkg/images/goldfont.png /usr/share/games/testpkg/lvl /usr/share/games/testpkg/lvl/lvl001.txt /usr/share/games/testpkg/lvl/lvl002.txt /usr/share/games/testpkg/lvl/lvl003.txt /usr/share/games/testpkg/lvl/lvl004.txt /usr/share/games/testpkg/lvl/lvl005.txt /usr/share/games/testpkg/lvl/lvl006.txt /usr/share/games/testpkg/lvl/lvl007.txt /usr/share/games/testpkg/music /usr/share/games/testpkg/music/alfa.it /usr/share/games/testpkg/music/beta.it /usr/share/games/testpkg/sounds /usr/share/games/testpkg/sounds/bounce.wav /usr/share/games/testpkg/sounds/click.wav /usr/share/games/testpkg/sounds/warning.wav /usr/share/icons /usr/share/icons/default.kde /usr/share/icons/default.kde/16x16 /usr/share/icons/default.kde/16x16/apps /usr/share/icons/default.kde/16x16/apps/testpkg.png /usr/share/man /usr/share/man/man6 /usr/share/man/man6/testpkg.6.gz Am I wrong in putting the kde icons in /usr/share/icons/default.kde which seem to be a symbolic link ? It's a symbolic link on both Kubuntu 9.10 and Fedora 11 though. Sounds like a common situation that the same directory is needed for different packages, so why is it a conflict ?

    Read the article

  • PPPTP VPN from Ubuntu cannot connect

    - by Andrea Polci
    I'm trying to configure under Linux (Kubuntu 9.10) a VPN I already use from Windows. I installed the network-manager-pptp package and added the vpn under Network Manager. These are the parameter under "advanced" button: Authentication Methods: PAP, CHAP, MSCHAP, SMCHAP2, EAP (I tried also with MSCHAP and MSCHAP2 only) Use MPPE Encryption: yes Crypto: Any Use stateful encryption: no Compression: Allow BSD compression: yes Allow Deflate compression: yes Allow TCP header compression: yes Send PPP echo packets: no When I try to connnect it doesn't work and this is what I get in the system log: 2010-04-08 13:53:47 pcelena NetworkManager <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'... 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 4931 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections 2010-04-08 13:53:47 pcelena pppd[4932] Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN plugin state changed: 3 2010-04-08 13:53:47 pcelena pppd[4932] pppd 2.4.5 started by root, uid 0 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN connection 'MYVPN' (Connect) reply received. 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. 2010-04-08 13:53:47 pcelena pppd[4932] Using interface ppp0 2010-04-08 13:53:47 pcelena pppd[4932] Connect: ppp0 <--> /dev/pts/2 2010-04-08 13:53:47 pcelena pptp[4934] nm-pptp-service-4931 log[main:pptp.c:314]: The synchronous pptp option is NOT activated 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 1, peer's call ID 14800). 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] LCP terminated by peer 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:929]: Call disconnect notification received (call id 14800) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:788]: Received Stop Control Connection Request. 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 4 'Stop-Control-Connection-Reply' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) 2010-04-08 13:53:48 pcelena pppd[4932] Modem hangup 2010-04-08 13:53:48 pcelena pppd[4932] Connection terminated. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:48 pcelena pppd[4932] Exit. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state changed: 6 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state change reason: 0 2010-04-08 13:53:48 pcelena NetworkManager <WARN> connection_state_changed(): Could not process the request because no VPN connection was active. 2010-04-08 13:53:48 pcelena NetworkManager <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001390] ensure_killed(): waiting for vpn service pid 4931 to exit 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001479] ensure_killed(): vpn service pid 4931 cleaned up Does anyone has suggestion on what can be the problem and how to make it work?

    Read the article

  • Windows Vista: turn off UAC dimming.

    - by Wesley
    I'm running Windows Vista HP 32-bit on my laptop right now (used to have Windows 7 Ultimate RC 32-bit). The thing is, I miss the fact that in Windows 7, UAC could be adjusted so that the whole screen doesn't dim when UAC activates. Is there software or a tweak that I could use to stop the whole screen from dimming when UAC goes on?

    Read the article

  • Change Bitlocker to use the TPM plus a USB key and a PIN

    - by Christopher Edwards
    I have bitlocker running on Windows 7 (x86) on a Dell D630 laptop (it has a 1.2 TPM). It is running in transparent mode. I'd like to know how to configure it to use a PIN and a USB key as well, but I can't find anything that looks like it does this in the UI. Does anyone know how to do this? Do I have to remove bitlocker and re-enable it?? (This should be possible according to this - http://en.wikipedia.org/wiki/BitLocker_Drive_Encryption)

    Read the article

  • How do I set up a public server on a network?

    - by tyjkenn
    I am trying to set up a personal cloud server with OwnCloud on Ubuntu. LAMP is all set up. I was able to access it using the external IP address when I connected it directly to the modem, but what if I what if I want my server to share a LAN? I still want it accessible over the internet, but then if I go to the IP address from a web browser, it just tries to log into to router admin tools. The internal IP address works across the LAN, but I want to be able to access it from anywhere. This may be simple and I may be over-thinking it, but how do access my server? The router I am using is ASUS WL-520GU.

    Read the article

  • How to use fiddler to customize google search results

    - by user23950
    I have previously asked this question, but the one who answered did not answer the question in a way a beginner could understand. http://superuser.com/questions/118144/customize-search-results-in-google I have already installed fiddler and I have saved a google search results with no results returned. By searching this: "+" What would be the next step in fiddler?

    Read the article

  • Unusual Restart

    - by Nikit Batale
    I am currently running Windows XP Professional on my computer. My configuration is Intel Dual Core 3.00 GHz, 512 MB RAM, 160 GB HDD. Sometimes, the computer just restarts without any particular reason. After restarting, I get an error report, "Windows has just recovered from a serious error." Such incidents happen once in 5-6 days. I don't face any other problems apart from this. Also, I don't face this problem in Ubuntu Karmic Koala though.

    Read the article

  • Robocopy permission denied

    - by Edoode
    Robocopy is preinstalled with Windows 7. I've used it many times in the past. I tried to copy a folder to a remote share with robocopy c:\source "\\server\share\path" /s /r:2 /w:2` As a result I get permission denied. Using explorer I can copy files to this share. I've opened a command prompt with administrator permissions with the same result. The share is read/write for public. [EDIT] I've successfully mapped a driveletter to the share, but robocopy still fails EDIT I've added the /B switch without success. The exact error is: 2009/09/26 20:43:14 ERROR 5 (0x00000005) Accessing Destination Directory \drobo \Drobo\fotos__NEW\Ericsson\

    Read the article

  • Can ping IP address and nslookup hostname but cannot ping hostname

    - by Puddingfox
    I have a DNS server set up on one of my machines using BIND 9.7 Everything works fine with it. On my Windows 7 desktop, I have statically-assigned all network values. I have one DNS server set -- my DNS server. On my desktop, I can ping a third machine by IP fine. I can nslookup the hostname of the third machine fine. When I ping the hostname, it says it cannot find the host. / C:\Users\James>nslookup icecream Server: cake.my.domain Address: xxx.xxx.6.3 Name: icecream.my.domain Address: xxx.xxx.6.9 C:\Users\James>ping xxx.xxx.6.9 Pinging xxx.xxx.6.9 with 32 bytes of data: Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Ping statistics for xxx.xxx.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\James>ping icecream Ping request could not find host icecream. Please check the name and try again. I have also specified the search domain as my.domain xxx.xxx and my.domain substituted for security Why can I not ping by hostname? I also can not ping using the FQDN. The problem is that this problem is shared by all applications that resolve hostnames. I cannot use PuTTY to SSH to my machines by hostname; only by IP

    Read the article

  • Can I downgrade from the Windows 8.1 preview to Windows 8 if I have an OEM CD?

    - by tesselode
    The internet is full of vague information about how you can downgrade the Windows 8.1 preview to Windows 8, and I kind of want to try it, but only if it's not going to be too inconvenient to uninstall if I need to. Here is my exact situation: I installed Windows 8 using an OEM CD. If I install the Windows 8.1 preview, can I use the factory restore feature to downgrade back to Windows 8? Does this change based on whether I installed using the Windows Store or the .iso?

    Read the article

  • Install Applications on OpenSUSE 11.2 w/ GNOME desktop

    - by dboarman
    Being new to OpenSUSE (v.11.2) and the GNOME desktop, I am somewhat at a loss. The differences between installing applications on Windows (formerly XP & Windows for the last 15+ years) seem to be just different enough that I am having some difficulty. For instance, how do I determine what install package I would download? Then, how do I actually install a tar.gz file or rpm, or whatever? I tried updating the Flash driver for my FoxTabs addon in FireFox but got an error that the /tmp/ directory wasn't to be used to run media, or something to that affect. So, I thought I would try to figure out first how to determine what file package to download, then how to install. I'm not sure that I need an OpenSUSE for Dummies type of link, but something that explicitly details differences in everyday operations and corresponding equivalents between Windows and OpenSUSE/GNOME. I'm also looking for a good IRC chat client.

    Read the article

  • Looking for USB Network Attached Storage (NAS) Adapter that supports multiple drives, NTFS/FAT32 fil

    - by braveterry
    I'm looking for a NAS Adapter that supports attaching multiple USB devices to the network. Here's what I'd like to see in a NAS adapter: Under $100.00. Support for multiple devices. This can be through a USB hub or through multiple USB connectors on the device itself. Bittorrent support would be nice, but this isn't a deal-breaker. Filesystem support for at least NTFS or FAT32. I'd prefer to not have to reformat to use the device, but this is also not a deal-breaker. Here is what I am NOT looking for: I'm NOT looking for a NAS enclosure. I already have a couple of spare external USB drives that I'd like to use. I'm NOT looking for a networked USB hub like the one mentioned here. Network USB hubs only allow access to a drive from one PC at a time. I'm NOT looking for a wireless router with a NAS built in. I already have a wireless router, and I'd rather not go through the hassle of replacing it if possible. What I've looked at so far PogoPlug: This supports multiple devices via a USB hub, but there's not Bittorrent support. It's $99.00, so I may end up going with this and hope that they patch in Bittorrent support later. Addonics NAS Adapter: This supports only one device per adapter, so it's a non-starter. SimpleNET NAS Head USB 2.0 Portable Dongle: I'm not 100% sure this supports multiple devices. Plus there doesn't seem to be any Bittorrent support. I'll try to update this post as I explore other devices.

    Read the article

  • GnuPG PHP gnupg Folder & Files Permission

    - by Michael Robinson
    Situation: we plan on using PHP's GnuPG extension to encrypt/decrypt files. Currently we've setup some test cases, using keys generated with GPG. The generated files reside in: /Users/username/.gnupg/ I am able to get keyinfo for the key I want to use to encrypt/decrypt, but when I attempt to use addencryptkey, I get: (E_WARNING: 2): gnupg::addencryptkey() [gnupg.addencryptkey]: get_key failed I think this is due to the permissions on the ~/.gnupg folder & enclosed files. The files are owned by me - username, but apache runs as www. A few days ago I did have this working, but it seems each time I use GPG Keychain Access to import / export a key, the folder's permissions are changed. Question: What are the exact permissions required to allow PHP's GnuPG to add encrypt & decrypt keys?

    Read the article

  • Load balancing with multiple gateways

    - by ttouch
    I have to different ISPs, each on each own network. The main connects via ethernet and the secondary via wifi. The two networks have no relation at all. I just connect to them simultaneously. The reason I want to load balance between them is to achieve higher Internet speeds. Note: I have no advanced network hardware. Just my pc and the two routers that I have no access... main network: if: eth0 gw: 192.168.178.1 my ip: 192.168.178.95 speed: 400 kbit/s secondary network: if: wlan0 gw: 192.168.1.1 my ip: 192.168.1.95 speed: 300 kbit/s A diagram to explain the situation: http://i.imgur.com/NZdsv.jpg I'm on Arch Linux x64. I use netcfg to configure the interfaces Configs: # /etc/network.d/main CONNECTION='ethernet' DESCRIPTION='A basic static ethernet connection using iproute' INTERFACE='eth0' IP='static' ADDR='192.168.178.95' # /etc/network.d/second CONNECTION='wireless' DESCRIPTION='A simple WEP encrypted wireless connection' INTERFACE='wlan0' SECURITY='wep' ESSID='wifi_essid' KEY='the_password' IP="static" ADDR='192.168.1.95' And I use iptables to load balance, rules: #!/bin/bash /usr/sbin/ip route flush table ISP1 2>/dev/null /usr/sbin/ip rule del fwmark 101 table ISP1 2>/dev/null /usr/sbin/ip route add table ISP1 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.95 metric 202 /usr/sbin/ip route add table ISP1 default via 192.168.178.1 dev eth0 /usr/sbin/ip rule add fwmark 101 table ISP1 /usr/sbin/ip route flush table ISP2 2>/dev/null /usr/sbin/ip rule del fwmark 102 table ISP2 2>/dev/null /usr/sbin/ip route add table ISP2 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.95 metric 202 /usr/sbin/ip route add table ISP2 default via 192.168.1.1 dev wlan0 /usr/sbin/ip rule add fwmark 102 table ISP2 /usr/sbin/iptables -t mangle -F /usr/sbin/iptables -t mangle -X /usr/sbin/iptables -t mangle -N MARK-gw1 /usr/sbin/iptables -t mangle -A MARK-gw1 -m comment --comment 'send via 192.168.178.1' -j MARK --set-mark 101 /usr/sbin/iptables -t mangle -A MARK-gw1 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw1 -j RETURN /usr/sbin/iptables -t mangle -N MARK-gw2 /usr/sbin/iptables -t mangle -A MARK-gw2 -m comment --comment 'send via 192.168.1.1' -j MARK --set-mark 102 /usr/sbin/iptables -t mangle -A MARK-gw2 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw2 -j RETURN /usr/sbin/iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment "this stream is already marked; escape early" -m mark ! --mark 0 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i eth0 -m conntrack --ctstate NEW -j MARK-gw1 /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i wlan0 -m conntrack --ctstate NEW -j MARK-gw2 /usr/sbin/iptables -t mangle -N DEF_POL /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p tcp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p udp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -j DEF_POL /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound eth0' -o eth0 -s 192.168.0.0/16 -m mark --mark 101 -j SNAT --to-source 192.168.178.95 /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound wlan0' -o wlan0 -s 192.168.0.0/16 -m mark --mark 102 -j SNAT --to-source 192.168.1.95 /usr/sbin/ip route flush cache (this script was made by fukawi2, I don't know how to use iptables) but I have no Internet connection... output of iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 1254K packets, 1519M bytes) pkts bytes target prot opt in out source destination 1278K 1535M CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK restore 21532 15M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 /* this stream is already marked; escape early */ mark match ! 0x0 582 72579 MARK-gw1 all -- eth0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 2376 696K MARK-gw2 all -- wlan0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 1257K 1520M DEF_POL all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 1276K packets, 1535M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain DEF_POL (1 references) pkts bytes target prot opt in out source destination 1236K 1517M CONNMARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 15163 2041K CONNMARK udp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 555 33176 MARK-gw1 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 555 33176 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 277 16516 MARK-gw2 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 277 16516 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 1442 384K MARK-gw1 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 1442 384K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 720 189K MARK-gw2 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 720 189K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 Chain MARK-gw1 (3 references) pkts bytes target prot opt in out source destination 2579 490K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.178.1 */ MARK set 0x65 2579 490K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 2579 490K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MARK-gw2 (3 references) pkts bytes target prot opt in out source destination 3373 901K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.1.1 */ MARK set 0x66 3373 901K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 3373 901K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0

    Read the article

  • No internet connection using Edimax routers

    - by idan315
    I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. I am really lost on how to approach this problem. Possible leads: when I view the network information, I see that my computer is connected to 'Multiple Networks'. One of those is "Network 4" (probably my router), and the other is Unidentified network. I don't know how to make the "Unidentified Network" disappear, or why is it even there in the first place. When I try using "ipconfig", I have two default gateway IPs. The first is 0.0.0.0, and the second is the IP of my router (192.168.2.1). The first router was Edimax BR-6204Wg. The second one I've tried connecting is BR-6424n. Any ideas?

    Read the article

  • How to remove a plain text protecting single quote from all the selected cells in LibreOffice Calc?

    - by Ivan
    I've imported a CSV file having the first column to be date-time values in ISO 8601 format like 2012-01-01T00:00:00.000Z for the first moment of the year 2012. Then, willing to make LibreOffice to recognize the format (as I was looking forward to plot a diagram), I've selected the column, chosen Format Cells... and entered the custom time format as YYYY-MM-DDTHH:MM:SS.000Z And this seems to work if... I edit a cell to remove a hidden single-quote from its beginning (which serves to protect a cell content from being interpreted) as all the newly formatted cells now store values like '2012-01-01T00:00:00.000Z (note the single quote - it is only visible when you edit a particular cell). And I am to do so for all the cells in the column. How can I automate this? UPDATE: I've already found a solution for the particular case of mine: it helps to set a column format to "time" in the CSV import dialogue. But I am still curious how could this be done in case I wouldn't have the original .csv data file to import but only the .ods file with the data already imported without the format specified at the import time.

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >