Search Results

Search found 4229 results on 170 pages for 'intel pentium'.

Page 104/170 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• No analog audio in 13.10

  - by danepowell

  I've installed 13.10 on a machine that was previously running Windows 8, and audio output isn't working out of the box. It worked fine in Windows, and the speakers work fine when hooked up to a laptop, so it must an incompatibility between Ubuntu and the motherboard. If I go to sound settings, "Built-in Audio" is selected (SPDIF is also available). This is an Intel Z77 motherboard with an integrated Creative CA0132 sound chipset. I've tried booting a live image of 13.10 (to check for a corrupt install), and the same problem exists. If I boot a live image of 13.04, the only audio output listed in sound settings is a "dummy" card. I've already tried basic troubleshooting steps, such as removing pulseaudio config directories, force-restarting alsa, and making sure the speakers aren't muted in the alsa mixer. At this point, I'm totally stumped :(

  Read the article

• Upgrade or replace?

  - by Felix

  My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

  Read the article

• windows are moving slowly on ubuntu 11.10

  - by myildirim

  Video Card : ATI Mobility Radeon HD 3650 Therefore my video card ATI when i check system info Driver : VESA: M86 Experience : Fallback i checked compiz config manager and disable all effects insipite of this windows are moving slowly.It does not for all windows,for example when i use google chrome and scrool up/down there is no effect but when i move window to another position it moves slowly but when i use pdf reader when i scrool up or down it moves slowly.How can i solve this ? i use core 2 duo intel cpu and run ubuntu 11.10. Edit : The Solution : Upgrade kernel and then update all graphic card drivers.Now there is no problem .

  Read the article

• Bad sound quality and headphones not working

  - by wifi

  Using Ubuntu 10.10, on a HP Pavilion t3019.es, which has a Realtek ALC880 soundcard. It has 6 rear jack outputs, plus digital audio input and output, plus 3 front jacks (mic, headphones and a blue one which i don't know what's for). The sound on my computer is very low, and when i raise the volume up to 50%, it starts sounding distorted, crackling. Also, the headphones don't work when i plug them (it just keeps on playing through the speakers). I tried to comment the "/etc/modprobe.d/alsa-base.conf" file according to the soundcard and jacks in my computer, but none of the lines added worked (naturally, didn't added them at once). I found out that adding "options snd-hda-intel model=generic" to it made the sound better, but it's not as good as in Windows yet. Any ideas? Other than setting the PCM value, didn't work for me. Thanks.

  Read the article

• No Sound via HDMI

  - by Goony Hill

  I have ubuntu installed on a Acer aspire revo 3700 intel atom processor with nvidia ion graphics this is plugged into a celcus 32 inch TV via HDMI (1080p). The video driver shows as an nvidia which I can select. I have set the sound to play via HDMI and the output to HDMI but get no sound. I have tried a sony 1080i TV with the box but get eratic results with the graphics, but the sound picks up straight away that is there is no need to select it. The graphics on the celcus TV work but I get a dialog box showing loads of different resolutions and frequencies which I have to close manually, these appear to be attempts to set different resolutions for the TV. Am I missing some sort of screen/sound driver, if so does anyone know what might support the celcus 32 inch (1080p) tv?

  Read the article

• Kernel Panic while Installing Ubuntu 12.10 from USB Drive

  - by user100889

  Good evening, I recently looked into installing Ubuntu alongside my Windows. I was able to mount the iso on a USB drive using Universal USB Installer. I verified it with the MD5sum utility and the hash is correct. When installing, I can get to the screen where I choose the boot order, select the USB drive, and then I get to a screen where Ubuntu seems to be 'loading' (purple background with Ubuntu logo and name in the middle). Then, all of a sudden, I get a "Kernel Panic - Not syncing: fatal exception in interrupt" error message. My specs : Intel Core 2 Duo CPU T5850 @ 2.16 GHz / 4 GB of ram / Packard Bell computer from 2007. / Windows 7 Ultimate x64 installed. What should I do now ? Thanks for your help.

  Read the article

• Some problem about Compiz and GTK on Ubuntu 14.04

  - by LVHoanh

  I installed Ubuntu 14.04 on my computer : i3/4G/750G/VGA Intel HD3000 & 1GB NVidia with CUDA GT540M. I've some problems with Ubuntu 14.04 : Does Ubuntu 14.04 support Emerald Theme Manager? Emerald Theme Manager is not available in Ubuntu Software Center? I installed Compiz and Compiz Setting Manager, it works ok, but the Windows 3D plugin is not work? The Shutdown/Restart function on Right-Top Panel is not work, is there any solution for this problem? The mouse theme I installed only work in current session, next time i restart computer it change back to default mouse theme? How can i resize the spacing between Desktop Icon? Waiting for everyone respond. Thankyou so much. P/s : My English is not good, expect you understand. :)

  Read the article

• Compiz cube issues since upgrading to 12.10. The caps and 3d windows are all over the place.

  - by Slarty

  I think it's due to residual settings from the old reflection and deformation plug in. I've attempted a complete reset of the settings and still no go though. The cube caps stay black and glitch out when I spin it etc and I see multiple copies of each window. It's like it's trying to display the "inside the cube" setting and the regular just floating 3d window at the same time. Here's one example (rep isn't high enough yet for fancy img imbed, sorry) http://i.stack.imgur.com/rrbBd.jpg Any ideas? I'm trying this on my desktop which is using an NVIDIA 8800 GTS card. I also tried it on an older laptop that uses an intel card and same deal. I think maybe I can use the dconftool and try to see if there are still settings from the deformation and reflection plug in causing this. Unless someone knows how to get that back (either a beta or an old version) somehow?

  Read the article

• running a laptop continuously

  - by intuited

  I have an experienced laptop — a Dell Latitude D400, with a Pentium M CPU — that I'd like to run as an always-on server. This model was launched in 2004; I got mine second-hand in about 2007. I've heard that continuous operation is generally not a good idea with consumer hardware, but am lacking in specific knowledge about related problems, and have little idea of how much such usage patterns would reduce the lifespan of the machine. I'm mostly concerned with the unit's core components; parts such as the hard drive which are readily replaceable are, well, readily replaceable. What sorts of things can I do to increase the lifespan of this machine under such circumstances? For example, I'm guessing that it would be wise to limit the CPU frequency or take other steps to keep the internal temperature low. However, I'm not sure where the point of diminishing returns would lie with such an approach — 50°C? 40°C? Would it be useful to suspend the machine periodically, for perhaps an hour each day, or a few hours each week?

  Read the article

• Dell L501X Display Port Screen issue

  - by jdflorezPA

  I got a Dell XPS L501X with a mini display port to VGA connector for my External Screen. On Displays it shows me: Acer Technologies 24" (which is the monitor) but only lets me up to 1024x768 resolution (The native resolution of this monitor is 1920x1200). I tried adding a new mode with xrandr, but when I applied it, it reverted back to 1024x768. As far as I know, the display port is controlled by the Intel card, right? Any ideas or suggestions would be appreciated. Thanks Using Ubuntu 11.10 32bit

  Read the article

• wubi install of ubuntu 12.10 on hp dv6 6154tx causes uncontrolled heating, fan speed, low battery life

  - by kansi

  i have a hp dv6 6154tx with an integrated Intel GPU and a discrete ATI GPU (Radeon Mobility HD 6490M (1 GB DDR5)). -Problems: when i install ubuntu 12.10 using wubi, my laptop starts heating, fans start to run fast (to much of noise), and battery goes really low Any attempt to install catalyst drivers (from ati official site and also proprietary drivers) fails , as after reboot when i login everything is gone like no unity no desktop and sometimes black screen appears. even bumblebee and jupiter didnt help.... :( So PLEASE, PLEASE can somebody post the real solution to my problems i.e.(inc battery life and stop fan noise and heating). (i want to install ubuntu only using wubi)

  Read the article

• 3TB non-boot hard disk on older motherboard

  - by Bcos

  It is time to expand the capacity of my Ubuntu home file server so I would like to purchase some 3TB hard disks. However, I am concerned with potential compatibility issues. I've tried searching around but I haven't found information which clearly addresses my particular situation. My server is running Ubuntu 10.04 on an Intel P35 chipset based system. The motherboard does not support UEFI (and, by extension, GPT?). However, Ubuntu does support 2TB disks. Will I be able to properly utilize these new disks, or does the motherboard limitation trump all else? The boot disk is <2TB and will not be updated nor am I dual-booting; these disks will be used strictly as slaves in a pure Ubuntu environment. I'd hate to pull the trigger on these new disks just to be unpleasantly surprised, so any feedback is appreciated. Thanks!

  Read the article

• Nvidia Powermizer Performance Levels

  - by jeffrey

  Is there anyway to configure Nvidia Powerimizer performance levels? My current setup has 3 power levels with the lowest one being 50mhz. The problem with this it that it lags compiz when it goes to the lowest performance level 0. Minimizing, maximizing, dragging windows, etc. are all sluggish when it's at the lowest level. Once powermizer leaves level 0 everything is very smooth and runs great. Is there anyway for me to remove level 0 and just run Level the two higher levels 1/2? I don't want to complete disable powermizer, but I can't stand the lagging once powermizer goes into performance level 0. Setting the option "prefer maximum performance" fixes the problem as it disables powermizer, but the GPU is overkill at stock speeds for most desktop use @ 850mhz. intel i5 2500k asus gene-z z68 evga 560ti fpb (driver 295.40) ubuntu 12.04 LTS x64

  Read the article

• Ubuntu 12.04 Hangs with Software Center open then opening Dash Home

  - by Josea

  I have a Dell D610 - Intel graphics - 1 Gig RAM. I have test the hard drive and RAM and both are fine. When I open Software Center, then Dash home my system locks up. The mouse cursor moves but is unresponsive if I try to right or left click anything. The keyboard is totally unresponsive and I have to hold the power button to power off! I have reinstalled from CD, did all updates but the issue persists. I tried using the track pad only, and I plugged in an external mouse also but no change. Everything else works great ! I am sick of running Vista and have no love for Metro! Thanks for any suggestions, on a scale of 1 to 10 (Newbie - Expert) I am about 3

  Read the article

• Ubuntu slows down even after cpu-intensive process is ended

  - by Matt2

  After a Skype video call, or the use of virtualbox, Ubuntu slows down to a crawl, even after the process is ended. Running htop reveals that processes that used little CPU before are now all using about 30% cpu (namely Compiz, Firefox, Python, and Skype, but I'm sure there are others), to the point where all my cores are at 99%. All I can do from here is restart. Any idea why this is happpening? I'm running Ubuntu 12.04 64-bit on 3.7 GiB of memory, Intel® Core™ i3 CPU M 330 @ 2.13GHz × 4, VESA: M92 graphics driver. Not sure why I'm running VESA, I installed fglrx, but I suppose that's a different question. Thanks in advance!

  Read the article

• Ubuntu 12.04 on Vm Player showing Wired Network Instead of Wireless Network

  - by Fak365

  I am new to Ubuntu, recently I installed ubuntu 12.04 in Vm Player (Virtual Machine) on my Dell laptop having windows 7 ultimate 32 bit for just to check the security of my wireless network and want to crack the WiFi (WPA-PSK) password but in ubuntu it does not show the wireless network it shows the 2 arrow sign as i have not connect the ethernet cable to my laptop and connected through WiFi on my main OS (windows 7) but it shows the wired network and internet is working but it does not show wifi connection. On windows 7 WiFi is connected and showing the WiFi connection and working correctly.But my main motive is to crack the WiFi password as it can't detect WiFi network so what to do? Please Help.!!thanks My Laptop Specification : Laptop : Dell Latitude D620 OS : Windows 7 Ultimate 32 bit Processor : Core Duo 2 T7200 @ 2Ghz Ram : 2 GB WiFi card : Intel Pro/Wireless 3945 ABG Virtual Machine : Vm Player V 5.0.1 If Need to Install Drivers Please Give Me Full Information how to install and which driver I should install. Thanks In Advance.

  Read the article

• How to make Ubuntu 14.04 run with less lag?

  - by King Shimkus

  I recently updated from Ubuntu 12.04 LTS to 14.04 LTS and for the first time it worked! However, whenever I move my mouse over an application icon on the unity shell, the animation takes forever to show me what the name of the application is ( A.k.a the tooltip ). The same happens with menus and sub-menus. Other than that, it is overall in general, slow. I just want to know if there are any tips to fix this or make my system faster. This is what it says when I type in glxinfo | grep renderer: GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer, OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) Output of lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)

  Read the article

• Samsung RV520 with 12.04 freezes while having WiFi and brightness control issues

  - by daveu1

  I have a new Samsung RV520 and have just installed Precise Pangolin 12.04 LTS. I am having serious problems now with the wifi constantly disconnecting. This then causes the brightness control to appear on the screen. The screen starts flickering and then freezes the whole machine. Indeed the brightness control doesn't work at all. I am using a Intel Centrino N wireless card. Please can anyone provide any guidance as to how to resolve these issue on this machine. Many thanks for your help.

  Read the article

• gt 555m instead of gt540m

  - by gangov

  Im gonna be really short. My Acer Aspire 5755G lap top has a Nvidia geforce gt 540m. But when i start lspci | grep VGA it shows me the following: ^[[Agangov@gangov-Aspire-5755G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M] (rev a1) Im really not familiar with the additional drivers in ubuntu. Can somebody tell me what should i do you my VGA properly?? Thank you in advance.

  Read the article

• Is this CPU usage normal for Xorg?

  - by Samuaz

  I checked System Monitor to see if the frequency of my CPU increases without doing anything and saw that xorg is always using 10-40% of the CPU even if it's not doing much of anything on the desktop or simply surfing the Internet. Is this normal? If not, how can I fix it? I have: a Macbook white 4,1 Core2 Duo running at 2.10 GHz GPU Intel GMA X3100 4GB of RAM Ubuntu 11.04 I am running Unity and I do not have many effects enabled. I have only activated Compiz animations, scale, desktop, some shadows...

  Read the article

• grub-install dummy fails. this is a fatal error

  - by user287764

  I am new to this but I have watched many video how to dual boot Ubuntu with windows 8. I have HP pavilion g6 notebook with 4 GB RAM and Intel i5 processor. I am installing Ubuntu 13.10 with windows 8. In the process of installation I select something else then make some partion as mentioned here. /dev/sda6. 2048 mb of swap area /dev/sda7. 18 GB of / And then I click on install. When installation starts it stuck when grub is installing And message arose as grub install dummy fails. This is a fatal error. I have searched about this on Google many others have faced same problem but none of them helped me. I think the problem is of uefi system. Is there any way so I can dual boot Ubuntu with windows 8.

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives and the raid card are working and there. I need to access them in Ubuntu to format them and place folders on them but I can not see them or figure out how to access them. Q2. Only 4 of the six drives connected to the MB are showing in Ubuntu, but they show as active in grey hole. I also need to access these drives in Ubuntu as this is my storage server. I am new to LINUX so any help you can provide with simple directions will be greatly appreciated . Thank you Mechh69

  Read the article

• No sound/audio after resuming from sleep

  - by hansvonaachen

  I've made a fresh UEFI install of Ubuntu 13.10 (64 bit) on a Lenovo Ideapad Z510 laptop with Intel i5 4200M processor. Ubuntu is the only OS installed on the computer, secure boot disabled. Everythings works fine (backlight issue fixed after editing rc.local file), the only minor trouble I have is resuming the laptop from "sleep" mode. If I close the lid and then wake the laptop opening it again, there is no audio/sound. I need to restart the computer (not even logging out helps). If I suspend the computer in a graphical way (not closing the lid): gearwheel in top right of the screen -- suspend and wake it up/turning on, audio works with no issues. Ideas how to fix this? Thanks!

  Read the article

• Not sure which Ubuntu to install (64 or 32 bit)

  - by user285993

  I want to use Ubuntu. I have Win 7 Home Premium 32-bit right now... I used to have 64 on this laptop (Toshiba Satellite c650) but my disc got a ring of death. Intel Penium CPU B940 2.00GHz, 4GB RAM Also, I'm guessing I need an image mounter such as PowerISO to install Ubuntu, if I don't have a DVD lying around that I can mount to? I'm a noob. Thanks for your help, in advance. EDIT: My question wasn't clear... can my processor and RAM handle 64-bit Ubuntu? Hell of a lot nicer than Win7

  Read the article

• Can't restart from Ubuntu 12.10

  - by Sankalp Kota

  I am dual-booting Ubuntu 12.10 and Windows 8 Pro. Both run seamlessly but I've had the persistent issue of not being able to restart my machine properly from Ubuntu. If I am on Ubuntu and hit the 'Restart..' option, the screen turns off and Ubuntu shuts down, but the computer never turns off and grub bootloader never shows on the screen. However, rebooting from Windows gets me to the bootloader as it should. Turning off the machine completely with 'Shut down' works fine with both Ubuntu and Windows as well. This issue was present even when I was dual booting Ubuntu 12.04 and Windows 7 Starter as well. My computer is an Acer AOD257 with 2 GB RAM, Intel Atom N570 Processor. Any help would be greatly appreciated!

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >