Search Results

Search found 29222 results on 1169 pages for 'network security'.

Page 1043/1169 | < Previous Page | 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050  | Next Page >

  • Why can't I route to some sites from my MacBook Pro that I can see from my iPad?

    - by Robert Atkins
    I am on M1 Cable (residential) broadband in Singapore. I have an intermittent problem routing to some sites from my MacBook Pro—often Google-related sites (arduino.googlecode.com and ajax.googleapis.com right now, but sometimes even gmail.com.) This prevents StackExchange chat from working, for instance. Funny thing is, my iPad can route to those sites and they're on the same wireless network! I can ping the sites, but not traceroute to them which I find odd. That I can get through via the iPad implies the problem is with the MBP. In any case, calling M1 support is... not helpful. I get the same behaviour when I bypass the Airport Express entirely and plug the MBP directly into the cable modem. Can anybody explain a) how this is even possible and b) how to fix it? mella:~ ratkins$ ping ajax.googleapis.com PING googleapis.l.google.com (209.85.132.95): 56 data bytes 64 bytes from 209.85.132.95: icmp_seq=0 ttl=50 time=11.488 ms 64 bytes from 209.85.132.95: icmp_seq=1 ttl=53 time=13.012 ms 64 bytes from 209.85.132.95: icmp_seq=2 ttl=53 time=13.048 ms ^C --- googleapis.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 11.488/12.516/13.048/0.727 ms mella:~ ratkins$ traceroute ajax.googleapis.com traceroute to googleapis.l.google.com (209.85.132.95), 64 hops max, 52 byte packets traceroute: sendto: No route to host 1 traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 *traceroute: sendto: No route to host traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 ^C mella:~ ratkins$ The traceroute from the iPad goes (and I'm copying this by hand): 10.0.1.1 119.56.34.1 172.20.8.222 172.31.253.11 202.65.245.1 202.65.245.142 209.85.243.156 72.14.233.145 209.85.132.82 From the MBP, I can't traceroute to any of the IPs from 172.20.8.222 onwards. [For extra flavour, not being able to access the above appears to stop me logging in to Server Fault via OpenID and formatting the above traceroutes correctly. Anyone with sufficient rep here to do so, I'd be much obliged.]

    Read the article

  • Problem with authentication of users via IE when using "host header value"

    - by Richard
    Hi, I'm trying to set multiple web sites up in an IIS 6. I've got a working virtual site residing under the default web site, but if I create a new web site in the IIS and asign it a host header value, let it point to the very same file structure as in the prevoiusly mentioned site and finally asign windows integrated security only to the site - I still cannot log in to the new site using MSIE 6 or 8 but FF 3.5 works fine. In the web log I get these entries if I access the localhost site 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 2 2148074254 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/Default.asp - 80 xxx\Administrator 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 200 0 0 If I however access via the host headre value site I get prompted to login but the login fail and I also get an error "401 1 2148074252" which not present when it succeeds. Can this be the issue? Pre login screen 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 2 2148074254 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 2148074252 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 post login screen (note that win credentials have not been submitted) 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 2148074252 Firefox will try to access using anonymous access and will prompt for login, after submitting win credentials it all works fine. For what reasoon is the IE so stubornly refusing to submit credentials to the "host header value" site? The site is in the Local intranet Zone and login is ticked for that zone. No teaming NIC's no FW, no nothing, I'm cluless :( /Richard

    Read the article

  • Embedding a WMV file on the web via URL in a Powerpoint presentation

    - by Dave
    I've got a situation where I want to distribute a Powerpoint presentation to several people. I want to be able to embed several large videos in this presentation by linking to a URL, for the following specific reasons: the videos are highly confidential, and I would like to be able to delete them at some later date, but still allow them to see it in the presentation while it is online. I want to send the presentation via email (so it should be small), and put the links on a server with a faster upload speed Maybe I'd like to change the video at some point without changing the presentation One option that addresses #1 is to hook up a webcam and allow them to see video stream from the office, but our upload rate is too slow for this to be a viable option. I've tried embedding a video and giving Powerpoint the URL. It seems to work initially, because the first frame appears in my slideshow. However, when I play the slideshow, nothing happens. I looked at the network traffic on my computer, and nothing was getting downloaded from the remote server. Any suggestions on how to make this work, or how to at least satisfy the criteria listed above would be great!

    Read the article

  • Advice needed: warm backup solution for SQL Server 2008 Express?

    - by Mikey Cee
    What are my options for achieving a warm backup server for a SQL Server Express instance running a single database? Sitting beside my production SQL Server 2008 Express box I have a second physical box currently doing nothing. I want to use this second box as a warm backup server by somehow replicating my production database in near real time (a little bit of data loss is acceptable). The database is very small and resources are utilized very lightly. In the case that the production server dies, I would manually reconfigure my application to point to the backup server instead. Although Express doesn't support log shipping natively, I am thinking that I could manually script a poor man's version of it, where I use batch files to take the logs and copy them across the network and apply them to the second server at 5 minute intervals. Does anyone have any advice on whether this is technically achievable, or if there is a better way to do what I am trying to do? Note that I want to avoid having to pay for the full version of SQL Server and configure mirroring as I think it is an overkill for this application. I understand that other DB platforms may present suitable options (eg. a MySQL Cluster), but for the purposes of this discussion, let's assume we have to stick to SQL Server.

    Read the article

  • Lose internet connection, yet online games continue

    - by Mike
    For the past week or so, my internet connection has been anything but stable. Restarting my modem/router always fixes the problems, but since it has occurred so often, I'm noticing confusing patterns which I was hoping someone could help answer. My internet connection kicks out about 4-5 times a day. The sure-fire way to fix it is to restart my all-in-one modem/router. Sometimes I can diagnose the problem on my laptop which resets my wireless network adapter and fixes the problem, but not always. If that doesn't fix the problem, it usually reports that the connection between the modem and internet is the problem which requires a restart of the router. The odd thing which baffles me is that my connection is supposedly lost such that no browsers can connect to sites, yet things like online games still continue to play without issue. How is this possible? I thought maybe the game was running locally on my PC but that couldn't be the answer because I was still getting messages from other players. So my real question is: How can my internet browsers (firefox, chrome, even IE) lose connection to the internet, but other applications like online games not? Am I actually losing connection or am I mistaken? Edit: I'd also like to add that netflix on my PS3 which is directly connected to the same access point will also lose connection. So internet browsers and netflix lose their internet connection while online games continue without an issue.

    Read the article

  • Error when connecting to shared Windows Printers

    - by TrueDuality
    I'm replacing our Windows 2003 print server with one running on Windows 2008 R2. I have connected and configured all of our printers and can successfully print to them from the server itself. All of the printers are shared and user's have permission to print on all of them. Whenever one of our clients attempts to connect through the shares they receive the following error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network. No messages are generated on the client Event Log nor is anything generated on the server. I have reinstalled the drivers as suggested by a few forum posts I came across and it didn't solve the issue. There are twelve different printer drivers and they are all experiencing this issue so I believe it is unrelated to the driver. I have disabled UAC on both the client and server since that has caused so many headaches before, but it too did not solve this problem. Does anyone have any idea what may be causing this?

    Read the article

  • Datacenter IP Addressing and DNS Management

    - by user65248
    Hello everyone Basically we are setting up a small Datacenter, about 300 amps power and max 50 racks, Im saying these coz I wanna u imagine the size and requirements, I have studied networking mostly Microsoft and Windows based systems , but I cant get how the IP addressing and DNS management and configuration works in a Datacenter , and unfortunately I have to setup everything by myself but defe we will have some staff to do some job. Now my questions Datacenter IP Addressing Suppose we have got a block of 200 IP addresses from our ISP, How can I manage these block of IP addresses, is there any software out there to simplify this I heard that using DHCP server in a datacenter is not recommended, otherwise what would u say about MS DHCL server ofc considering we need to have backup serversin case of failur How can I assign a block of IPs to a specific rack, I know with different software and management its different but Im asking how it is done normally IP addresses are exposed to the whole network, what if a customer try to use an IP address and is not assigned to their server or rack , how can I prevent this or how can I track the IP usage DNS Management Im goin to setup at least two servers for our DNS servers, I know nothing about Datacenter DNS system, but I have configured DNS server in normal networks and also for webservers, Now I wanna know What exactly needs to be done for a DNS in a datacenter that is not done for normal networks. How can I configure PTR records why cant I configure PTR records on my webserver side DNS server and it should be done on datacenter DNS server , I mean what is the difference in DC DNS servers that allow us to to so , I know the question is very silly and simple but Im confused Is there any software outthere to allow doing the whole thing, I mean automatically add records to the DNS and also managin IP addresses !? Thanks in advance

    Read the article

  • Separate computers in my apartment can't communicate to each other?

    - by Razor Storm
    In my apartment, the management provides the building with a network connection. I have my computer plugged into the ethernet coming out of the walls, and my friend who also lives in the apartment building has his computer connected to a separate ethernet jack. As far as I know our two computers are not within a LAN, and ipconfig shows that we only have external ip addresses. The problem, then, appears when we attempt make direct communication between our computers. I have some hosting server set up on my machine, and my friend is unable to connect to it via my ip address. Other people who do not live in the apartment can connect fine. Ethernet adapter Local Area Connection: IPv4 Address. . . . . . . . . . . : 204.29.113.41 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 204.29.112.1 His ip: 204.29.113.104 Using a fulltunnel vpn doesn't help.

    Read the article

  • Accounting setup in freeradius with mikrotik and the "always" module

    - by Matt
    I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

    Read the article

  • Networkmapping script (VBS) Vista doesn't work, XP does

    - by The_cobra666
    Hi all, I've got a weird problem, (like always :p ) Okay: Situation: Windows 2003 domain with XP clients. With a GPO I'm running a VBS script on login to map a few drives. This works great on XP, but not on Vista. If I manually run the script after the user has logged on, it works. So I know the script works on Vista, it just doesn't run via the GPO. The user has admin privileges. I also have the same problem on Windows 7 RC1. So it must be related. The script: on error resume next Dim objNetwork Dim strDriveLetter, strRemotePath, strUserName strDriveLetter = "Z:" strRemotePath = "\\Onsgeluk.ons_geluk.local\Profieldoc" Set objNetwork = WScript.CreateObject("WScript.Network") strUserName = objNetwork.UserName objNetwork.RemoveNetworkDrive "Z:" objNetwork.MapNetworkDrive strDriveLetter, strRemotePath _ & "\" & strUserName objNetwork.RemoveNetworkDrive "X:" objNetwork.MapNetworkDrive "X:" , "\\Onsgeluk.ons_geluk.local\Data" objNetwork.RemoveNetworkDrive "Y:" objNetwork.MapNetworkDrive "Y:" , "\\Onsgeluk.ons_geluk.local\Mappen\hoofdverpleging" Does anyone have a clue? Thanks in advance guys (and girls) ps: sorry for my bad english!

    Read the article

  • DNS server not working?

    - by Behrooz A
    I just set up a DNS Server on my windows 7, called SimpleDNS I added a zone for example sag.com and defined www.sag.com and sag.com to 192.168.1.2 (my Network IP Address) . the problem is when I try to ping sag.com the SimpleDNS logs says that it answered the request with 192.168.1.2 , but the ping doesn't resolve anything . SimpleDNS logs: > 14:00:43 Request from 192.168.1.2 for A-record for www.sag.com > 14:00:43 Sending reply to 192.168.1.2 about A-record for > www.sag.com: 14:00:43 -> Answer: A-record for www.sag.com = > 192.168.1.2 14:00:43 -> Authority: NS-record for www.sag.com = mehr-pc nslookup : > C:\Users\Mehr\Desktop>nslookup www.sag.com DNS request timed out. > timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 > > DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. > *** Request to UnKnown timed-out the DNS server IP is 192.168.1.2 , and Access point address : 192.168.1.1 what should I do?

    Read the article

  • Creating a ssh tunnel to transfer files?

    - by Vincent
    For me, networks are a very "opaque" thing, and even with reading a lot of tutorial about SSH, I do not understand how to create a basic tunnel to transfer my files. The configuration is the following : My Computer --[Internet]--> Bridge Machine --[Local Network]--> Final Machine Currently I do the following : 1) Connect to the Bridge Machine with : ssh -X [email protected] 2) Connect to the Final Machine with : ssh -X username@finalmachine 3) I copy the address of files I need (for example .../mydirectory) 4) Then I deconnect from the finalmachine with : exit 5) I copy the files to the bridge : scp -r username@finalmachine:/.../mydirectory . 6) I deconnect from the bridge with : exit 7) I copy the files to my machine : scp -r [email protected]:/.../mydirectory . Which is quite complicated. My question is basic : how to simplify this using a SSH tunnel ? (and please explain me the signification of each command line you write, to understand what each line really do and to avoid to use it like a magical thing. Furthermore if some ports number are used, explain me if I can pick a completely random number or if I have to choose a specific one.)

    Read the article

  • WD my cloud 4th is Super Slow

    - by Saduser
    I am using a WD my cloud 4Tb and I have read other posts about users complaining about getting only 10Mb per second. My problem is that I am getting about 100kb/s to transfer a 125gb iPhoto library. Estimated time is 11 days to transfer this file. This is unacceptable. On the back of the WD cloud I am getting a solid green light and from what I read this means that I am on a gigabyte network. I have mac book pro running Mac OS Mavericks. I have tried 4 different cables and turned off my router firewall. I don't run anti-virus nor any firewall on the mac. Other things I have checked: direct connection to both router and WD cloud device. Tried wireless but it is even slower. Previously I was able to transfer a 55Gb iPhoto library in 14 hours which I felt was acceptable. I figured it would take approximately double the time to transfer the 125gb file but 11 days is ridiculous. Any other suggestions? Anything else I can check (how to check it) what is the bottle neck?

    Read the article

  • Disk IO slow on ESXi, even slower on a VM (freeNAS + iSCSI)

    - by varesa
    I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas 8.0.4). Those two machines are connected to each other with Gigabit ethernet. The raid-z volume is divided into three parts: two zvols, shared with iscsi, and one directly on top of zfs, shared with nfs and similar. I ssh'd into the freeNAS box, and did some testing on the disks. I used ddto test the third part of the disks (straight on top of ZFS). I copied a 4GB (2x the amount of RAM) block from /dev/zero to the disk, and the speed was 80MB/s. Other of the iSCSI shared zvols is a datastore for the ESXi. I did similar test with time dd .. there. Since the dd there did not give the speed, I divided the amount of data transfered by the time show by time. The result was around 30-40 MB/s. Thats about half of the speed from the freeNAS host! Then I tested the IO on a VM running on the same ESXi host. The VM was a light CentOS 6.0 machine, which was not really doing anything else at that time. There were no other VMs running on the server at the time, and the other two "parts" of the disk array were not used. A similar dd test gave me result of about 15-20 MB/s. That is again about half of the result on a lower level! Of course the is some overhead in raid-z - zfs - zvolume - iSCSI - VMFS - VM, but I don't expect it to be that big. I belive there must be something wrong in my system. I have heard about bad performance of freeNAS's iSCSI, is that it? I have not managed to get any other "big" SAN OS to run on the box (NexentaSTOR, openfiler). Can you see any obvious problems with my setup?

    Read the article

  • What could cause a huge packet loss in Ubuntu 9.10, for both wired and wireless?

    - by xzenox
    I was previously using 9.04 fine (and in fact, I am posting this from my old 9.04 live cd). I tested the following install steps in a virtualbox vm prior to following the sames ones to upgrade my laptop: Download/burn ubuntu minimal cd (12mb one) Install ubuntu minimal sudo apt-get update sudo apt-get upgrade sudo apt-get ubuntu-desktop ubuntu-standard In the VM worked fine and I found myself with a working 9.10 ubuntu, network worked fine and I was able to test my backups and DropBox without a hitch (host was 9.04). When I followed the same steps on my laptop, everything worked up to after 9.10 being installed and working. As far as I can tell, everything besides eth0/wireless works. For some reason, I am unable to access the internet. Ping reports that over 99% of packets get lost (over an hour or so of pinging). This means for example that if I try hard enough, I can load a webpage but only at the cost of much patience... This happens both for a wired and wireless connection to my wrt310n (updated with latest firmware). At first I thought that it could be related to the ipv6 issues ppl have been experiencing however even after disabling ipv6 at the kernel level (through grub), I still get the issue. I do not think this is related to DNS issues or the likes since even when I ping my ISP's gateway IP, I have the same amount of packet loss. No DNS resolving should be required there. Access to my router works peachy with no packet loss there. I've tried different MTU values but to no avail. Note that this issue affects every web-enabled application: firefox, ping, synaptic, etc. The same hardware/router combo works with 9.04 but not with 9.10. In fact, when I did: sudo apt-get ubuntu-desktop ubuntu-standard after 9.10 minimal was installed, it downloaded over 400mb of packages without a hitch so my guess is that one of those packages either in ubuntu-desktop or ubuntu-standard is causing havok. Thoughts?

    Read the article

  • Trying to delete a directory stored on a WIndows server, mounted on a mac

    - by AdamG
    I am trying to delete a directory stored on a Windows 2008 R2 server, mounted on a Mac as network home (10.8.5). The directory was created by Safari and stores temporary internet files. I need to be able to delete this folder on logout from a Mac bash script. The Terminal on Mac shows the directory as empty: 36W-FacRm-02:History lwickham$ cd /home/lwickham/Library/Caches/Metadata/Safari/History 36W-FacRm-02:History lwickham$ ls -al total 0 drwx------ 1 lwickham CGPS\Domain Users 264 Nov 8 09:24 . drwx------ 1 lwickham CGPS\Domain Users 264 Nov 8 09:28 .. However, on the Windows server it has a single 0kb file that doesn't start with a "." but yet is invisible to the Mac. E:\FacultyHome2\lwickham\Library\Caches\Metadata\Safari\History>dir Volume in drive E is FacultyUsers2 Volume Serial Number is 8C17-4EF3 Directory of E:\FacultyHome2\lwickham\Library\Caches\Metadata\Safari\History 11/08/2013 09:24 AM <DIR> . 11/08/2013 09:24 AM <DIR> .. 11/07/2013 04:28 PM 0 http?%2F%2Fwww.google.com%2Furl?sa=t&rct= j&q=&esrc=s&source=web&cd=6&ved=0CFsQFjAF&url=http%253A%252F%252Fwww.usbanklocat ions.com%252Fhsbc-bank-usa-96th-street-branch.html&ei=5vR7UtmXEPjfsATe0YCIBA&usg =AFQjCNF9ypKbpYbXRng00FY3W8Y6cF1Tiw&bvm=bv.56146854,d. 1 File(s) 0 bytes 2 Dir(s) 514,231,967,744 bytes free All my attempts to delete the dir from the Mac have failed: 36W-FacRm-02:History lwickham$ rm -fr /home/lwickham/Library/Caches/Metadata/Safari/History/* 36W-FacRm-02:History lwickham$ rm -frd /home/lwickham/Library/Caches/ rm: /home/lwickham/Library/Caches//Metadata/Safari/History: Directory not empty rm: /home/lwickham/Library/Caches//Metadata/Safari: Directory not empty rm: /home/lwickham/Library/Caches//Metadata: Directory not empty rm: /home/lwickham/Library/Caches/: Directory not empty

    Read the article

  • Cisco VPN endpoints disconnecting from a VLAN

    - by dunxd
    I have a number of Cisco ASA 5505 and PIX 506e around the world acting as VPN endpoints. They connect to a Cisco VPN Concentrator 3000 at HQ. I am using EZVPN to set up the VPN (i.e. most of the config is central on the VPN Concentrator) The majority of endpoints work absolutely fine. However, there are three that do not. 2 ASAs and 1 PIX get disconnected from one of the VLANs on our network. This is the VLAN that my monitoring server runs on - so those endpoints look as if they have gone down. However, I can still ping the endpoints from our user VLAN. If I then SSH onto the endpoint, and do a ping to my monitoring server, the connection comes back. Then after about 10 minutes it stops working again. I've looked at the configuration of my endpoints, and I can't see any significant differences. One common feature is that the affected endpoints are connecting to the internet via retail quality routers. However, I don't see how this could affect traffic within a VPN tunnel. Any ideas or suggestions? I've also got a thread on Cisco's forums at https://supportforums.cisco.com/thread/344638. One other person has reported the same problem.

    Read the article

  • Exchange 2003 ActiveSync problem

    - by colemanm
    We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

    Read the article

  • Dropped connections between Linux Servers in Data Center

    - by Emil H
    I have a number of linux servers at a us-based datacenter. The servers were installed by the hosting company, and are running fedora core. We're experiencing problems with dropped connections. The issue seems to be that when we attempt to connect to one of the other servers after a period of inactivity, the first connection attempt will fail, and sometimes the second. However, after that the connection succeds and it works for a while. This happens for both mysql connections and raw socket connections, but only seems to occur when connecting to some of our servers. The confusing part is that it some of the servers for which we see different behaviors have identical hardware configuration and software. For example, it happens when connecting to a server called mysql2, but not for a server called mysql3. These servers were installed at the same time, but the same specifications. The problem can be reproduced somewhat reliably, but only after waiting fifteen minutes to half an hour. This makes it hard to diagnose, and even harder since I'm not really sure what to look for. I realize that connections sometimes failed, and that we should write our applications to compensate for this but these servers all in the same data center. Why would it matter if two servers haven't communicated for a while? Does anybody have an idea what might be causing this? Is it a server configuration problem or a network problem that I should contact the hosting company about. What do I tell them to look for? Unfortunately our experience has been that the support staff doesn't investigate problems in depth unless we give them detailed directions.

    Read the article

  • Accidentally mounted a ReiserFS drive as MBR on my windows box - how do I recover?

    - by Ryan
    I had a WD Netcenter with a 160GB drive that kept dropping off the network. I opened up the enclosure and removed the hard drive, connected to a Windows box without knowing the drive used ReiserFS.... When mounting on the Windows box, I chose "MBR" as filesystem. 70GB of data corrupted: 90% of data is word documents, excel spreadsheets, and jpg's - all mission critical. Attempted recovery on Linux box (ubuntu) using TestDisk: I could see the container, but couldn't get anything out – according to TestDisk this was because I chose "none" as filesystem. Attempted recovery using Nucleus Kernel Recovery for windows: 98% of what was recovered is incomplete and/or unusable. I need to know if a way exists to recover or rebuild original ReiserFS MBR, or what tools/techniques might give me the best results in recovering the data. Found a Windows version of TestDisk and I ran it yesterday - here are the results: TestDisk 6.14-WIP, Data Recovery Utility, May 2012 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 160 GB / 149 GiB - CHS 19457 255 63 The harddisk (160 GB / 149 GiB) seems too small! (< 519 GB / 483 GiB) Check the harddisk size: HD jumpers settings, BIOS detection... The following partitions can't be recovered: Partition Start End Size in sectors > ReiserFS 3.6 62 241 8 19458 0 18 311581568 ReiserFS 3.6 62 248 55 19458 8 2 311581568 ReiserFS 3.6 62 254 37 19458 13 47 311581568 ReiserFS 3.6 63 6 28 19458 20 38 311581568 ReiserFS 3.6 63 13 11 19458 27 21 311581568 ReiserFS 3.6 63 21 43 19458 35 53 311581568 ReiserFS 3.6 63 27 41 19458 41 51 311581568 ReiserFS 3.6 63 37 35 19458 51 45 311581568 ReiserFS 3.6 63 54 20 19458 68 30 311581568 ReiserFS 3.6 63 76 26 19458 90 36 311581568

    Read the article

  • Configuration for Router Behind Uverse 2Wire

    - by Nori
    I have a 2Wire Uverse router(RG). I'm not particularly fond of it and want to use it as a modem only. I have a Linksys router with Tomato firmware on it and want that to be configured as the router. Most of the "guides" I've seen in my searches has been to enable DMZ Plus mode, but I don't see a way to make that work while my router has a static IP address. I played with it for quite some time yesterday and didn't see a way to get it to work. Then I ran across a setting in broadband for configuring another network. I played with that for a little bit but ran out of time and couldn't get it to work. So my question is for anyone out there who has Uverse and successfully setup a Tomato based firmware router behind the RG. How did you get it configured? I'm sure if I continued playing with it I could get it to work, but if someone out there already has it working then that would make my life easier. Thoughts? Thanks.

    Read the article

  • Why does just splitting an Ethernet cable not work?

    - by Sin Jeong-hun
    I thought the Ethernet is logically a one-line communication bus (for argument's sake, I am excluding hubs). All machines attached on the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why would splitting one Ethernet line from my home router into two and connecting two computers not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room, and I had put a computer in another room (also my room, though). Since a wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

    Read the article

  • httpd.config Easy Apache WHM CentOS

    - by jessie
    First let me explain how I got to this situation. I run a Streaming Video Site. Videos are about 100-250MB in size at any given time there are 500 people on the site. So I guess that would make then static. Recently My site started getting really slow and the only way to fix it temporarily was to restart apache. Now there was no change in traffic that could have caused this. My site is not being attacked. My hosting company recomended to implement mpm_mod and suPHP. They did that by using Easy Apache in WHMS. Then everything was working fine but a little slow. I researched around and to my understanding that mpm will do that but be more table. I was told that installing FastCGI would speed things up just enough. Well that made everything worse. The site is slow and time's out. I used WHM and took off fastCGI but its still the same, it seems like everything i do as of now nothing changes. I even did a roll back on the htconfig file but that didn't work. I'm not sure how to fix this. and my hosting network guy wont be able to touch the problem until Tuesday. I have root access.

    Read the article

  • How to prioritize openvpn traffic?

    - by aditsu
    I have an openvpn server, with one network interface. VPN traffic is extremely slow. I tried to do traffic control with this configuration (currently): qdisc del dev eth0 root qdisc add dev eth0 root handle 1: htb default 12 class add dev eth0 parent 1: classid 1:1 htb rate 900mbit #vpn class add dev eth0 parent 1:1 classid 1:10 htb rate 1500kbit ceil 3000kbit prio 1 #local net class add dev eth0 parent 1:1 classid 1:11 htb rate 10mbit ceil 900mbit prio 2 #other class add dev eth0 parent 1:1 classid 1:12 htb rate 500kbit ceil 1000kbit prio 2 filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 1194 0xffff flowid 1:10 filter add dev eth0 protocol ip parent 1:0 prio 2 u32 match ip dst 192.168.10.0/24 flowid 1:11 qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 qdisc add dev eth0 parent 1:11 handle 11: sfq perturb 10 qdisc add dev eth0 parent 1:12 handle 12: sfq perturb 10 But it's still extremely slow. I have an imaps connection that keeps transferring data continuously (I successfully limited the rate) but with openvpn I can't seem to get more than about 100kbit/s The internet connection speed is about 3mbit/s (symmetric) What could be the problem? Does the sport filter work for udp?

    Read the article

  • Opening port 80 in router has no results

    - by Ricardo Pieper
    A friend of mine has a ADSL modem and I need to forward some ports. I have already forwarded the 1521 port (Oracle) and it's working fine. Now I need to forward the port 80. I already set up his IIS bindings to this port, and also forwarded the port like this video shows: https://www.youtube.com/watch?v=DLKD-fyexoo So I think I did everything correctly. The local IP address is also the same as the machine where the IIS server is running. I'm sorry, but I can't post images since i don't have 10 points :( Somehow I can't forward this port, yougetsignal.com keeps saying that the door is closed. When I try to open the port, the Control Panel says me that I have to access the control panel in the 8080 port, because the 80 port will be open. Ok, that's fine. But I'm still able to access it in the 80 port, and when I try to access it in the 8080 port, it doesn't work. I'm trying it with the TPLINK 8816, but I also tried to open it in the Opticom DsLink 279, and it didn't worked (using another machine), I got the exact same results. He has a dynamic IP address, but he is also using No-ip, so I can always access his Oracle database in a certain static address. The 1521 port is open. I also tried to disable the firewall in Windows, but that makes no sense to me, since the router doesn't really open the port 80. Clearly I'm missing something. I have never done it in my life, so I dont know how to proceed. Restarting the router was the first I did, no results. I'm accessing his laptop through TeamViewer, so I'm testing the port outside his local network. Edit: My ISP says that they allow to open ports, and the 1521 port is opened. What could I do to open the 80 port?

    Read the article

< Previous Page | 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050  | Next Page >