Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 105/332 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• Graphics on boot split into three sections

  - by a sandwhich

  I just installed 13.04 onto a new laptop because of the ease of install with the uefi bios. When I boot the system though, the screen is split into three sections each about 640x200 at the top of the screen, with the active terminal mirrored across them. Although I can login, startx fails due to something about a file. I have tried booting with vga=711 and normal nomodeset with no success. Booting the live usb I originally installed from results in the same issue. The graphics driver in the xorg.conf.something from what I can make out is set to vesa, but it could be set to some other four character value that is similar to vesa, hard to tell. How can I fix this? One thing to note, the laptop has two dedicated GT 750m's, along with the intel 4000 built into the processor. This is what it looks like, the purple box is what the grub2 menu was in before boot.

  Read the article

• Ubuntu 14.04 and Dell E6440 - sound and mouse working after suspend/resume

  - by slawek.mikula

  I've installed fresh Ubuntu 14.04 on Dell Lattitude E6440 and i've encountered two strange issues when doing full system start/restart: - mouse scroll when full restart is working very fast. One turn of the wheel cause very large change of value (window scroll, sound change etc.) But when i suspend and resume laptop it starts working correctly (one turn of the wheel and small change of value - the same as in previous versions of Ubuntu) - sound from speakers - the same issue. When full restart the sound does not come from internal laptop speakers. It works though through headphones. After suspend/resume internal speakers starts to work. What can be a cause of these issues ?

  Read the article

• Remote Development With Solaris Studio

  - by rchrd

  A new technical article has been published on OTN: How to Develop Code from a Remote Desktop with Oracle Solaris Studio by Igor Nikiforov This article describes the remote desktop feature of the Oracle Solaris Studio IDE, and how to use it to compile, run, debug, and profile your code running on remote servers. Published May 2012 Introducing the IDE Desktop Distribution Determining Whether You Need the Desktop Distribution Creating the Desktop Distribution Using the Desktop Distribution See Also About the Author Introducing the IDE Desktop Distribution Sun Studio 12 Update 1 introduced a unique remote development feature that allows you to run just one instance of the IDE while working with multiple servers and platforms. For example, you could run the IDE on an x86-based laptop or desktop running Oracle Linux, and use a SPARC-based server running Oracle Solaris 10 to compile, run, debug, and profile your code. The IDE works seamlessly just as if you had the Oracle Solaris operating system on your laptop or desktop. ....read more

  Read the article

• Is it possible to copy U1 files between two PCs locally when an Ubuntu user account is recreated?

  - by Federico Ghigo

  I have 2 Ubuntu 11.04 PCs (desktop and laptop), both synced via U1. Recently I completely rebuilt the user account (completely deleted the home directory) on one of the two (the desktop), and now I have to resync. Problem is that the PC is on a slow connection and I have difficulties resyncing the 14gb of data. Of course I have the opportunity of moving it to a place where the connection is faster, but it's not comfortable, and it will take some time. Since the laptop is in sync with the account I was wondering if stopping the service and copying the files + some database (which files is the question) could let me avoid resyncing everything.....

  Read the article

• How do I resolve "No JSON object could be decoded" on mythbuntu live CD?

  - by Neil

  I have been running a MythTV frontend on my laptop for some time against a MythTV backend installed in Linux Mint 12 on another computer, and everything works fine. Now, I'm trying out the Mythbuntu Live CD (12.04.1 32-bit) on the laptop, to turn it into a dedicated front end. It's connecting to the network just fine, and I can see my server. When I click on the frontend icon on the desktop, it asks me for the security code, which I've verified against mythtv-setup on the server. However, when I test that code, it shows the error message "No JSON object could be decoded". I've looked in the control center to see if there's something else I should be setting up. The message above implies to me that it can't find the server, but I can find no place in the control center to tell it where to find my myth backend, which I find a little odd. Does the live CD not work against a backend server on another machine?

  Read the article

• Starting Spring Lineup

  - by onefloridacoder

  This morning I finished removing all VS2008 related frameworks and installed items related to VS2010 based on posts around the community.  Here’s what I started with on my dev laptop, the config for my laptop:  HP Pavilion dv6  Win7 64-bit 4Gb RAM Installed Developer Tools and Frameworks: Sync 2.0 SDK Visual Studio 2010 Pex Power Tools Enterprise Library 5.0 SQL Server 2008 Developer Edition Visual Studio 2008 Ultimate Expression Blend 4 RC Team Foundation Server 2010 Team Foundation Server 2010 SDK   The only item I did not reinstall on top of VS2010 was ReSharper 4.5 only because I read mixed reviews on the dev experience.  At this point I really just want to get use to the new(er) IDEs without adding any confusion to my dev machine.  I’ll level off my desire for early adoption at Blend, EntLib 5.0, and Pex - I’m also interested in the Moles integration as well.   Something else I didn’t have to install was my IDE theme which was left behind in my user folder was merged during installation – afterwards it was nice to see once the dust settled.

  Read the article

• Cycles through black screen on login after changing password

  - by John L

  On my laptop, I forgot the password to my Ubuntu partition, so I logged into the root command shell on the recovery start up option in GRUB so that I could change the password. On my first attempt to change my user password, I got this error: root@username-PC:~# passwd username (*not my actual user name*) Enter new UNIX password: Retype new UNIX password: passwd: Authentication token manipulation error passwd: password unchanged After doing some research, I discovered that I was stuck as read only on the file system, so I ran the following command to remount the file partition as read/write: mount -rw -o remount / Afterwards, I change my user password using passwd and it was changed successfully. I restarted my laptop and tried to login using the new password but the only thing that happened was after entering my password it flashed to a black screen with some text that I couldn't make out except for "Ubuntu 12.04" then another black screen half a second later, and finally back to the login screen. Repeated attempts to login results in only this action.

  Read the article

• Install Ubuntu 13.10 in dual boot with Windows 8.1

  - by Xaxt

  I have a laptop with installed Windows 8.1 x64. I want to intstall Ubuntu 13.10 (x64 of cause) in dual boot with it. I've made bootable USB stick (using unetbootin) with Ubuntu and tried to boot with it. It boots fine, and allows me to choose language and asks whether I want to install Ubuntu or just boot it. But if I select any ot these options, it shows black screen and hangs. I've been waiting about 15 minutes for it, but nothing happened. Light of USB stick indicates that my laptop was not trying to read from it that time. I switched off EFI in BIOS, switched AHCI/SATA modes, burned ISO image to DVD and still same effect. This topic can be called a duplicated, but I have't find what it duplicates. In other topics people asked what will happen if they update Windows 8 to 8.1 having already dual boot and I have installed Windows 8.1 and want to install Ubuntu alongside with it Did I miss something?

  Read the article

• How to properly set up a network bridge using bridge-utils using wlan0 as the internet "source"?

  - by Miguel Azevedo

  Hey everyone this is my first post so go easy on me. I currently have a laptop with Ubuntu Studio 12.04 Beta 2 that is supplying a wireless internet connection to a windows 7 desktop computer that's connected directly to the laptop through Ethernet. I'm using the "shared to other computers" method in network manager but I believe it doesn't work with what I want to do. I would like to have the windows computer on the same subnet as every other computer in my house (192.168.1.x) so I can use LAN applications (MIDI over WiFi, Bonjour etc.) on the windows computer without having to run a massive cable to the router. I've been googling endlessly and tried multiple configurations in the /etc/network/interfaces file without success. All of them would report "cannot add wlan0 to bridge" Is there a specific way to make this work? What am I missing? Thank you

  Read the article

• Does an onboard video affect the X windows configuration?

  - by Timothy

  Does the onboard video on the motherboard affect the X windows configuration? My system has onboard and pcie video. The onboard video is a NVIDIA GeForce 7025 GPU, On Board Graphic Max. Memory Share Up to 512MB(Under OS By Turbo Cache). I have a pcie dual head video card installed with two monitors. The video card is a GeForce 8400 GS, with 512mb memory. When installing Ubuntu 12.04, only one monitor worked. When pulling up system settings- Displays it shows a laptop. This is a desktop pc. I did get both monitors to work using nvidia using twinview -- A complicated process! When checking nvidia now it shows the monitors disabled. The Nvidia X server setting does show the GPU and all the information. I was thinking it's seeing the onboard video on the motherboard. Why else would it show laptop?

  Read the article

• Internal Mic Ubuntu 12.04 on Compaq Presario CQ50

  - by Genius FDE

  I have problem with the internal microphone not working on Ubuntu 12.04. It looks like a common problem on most of the laptops running ubuntu 12.04. I tried a lot of possible solutions available online but nothing seems to work! sudo aplay -l gives: **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 By the way, the Laptop has no HDMI port! I've seen the same problem with Sony laptop but the mic was working with too much static noise. Thank you.

  Read the article

• Ubiquity crashes when installing from CD

  - by Ashes

  I didn't want to take any risks so I ordered a CD from Canonical to get Ubuntu. Thing is, another CD was given to me about 2 days before the CD from Canonical got to me, so I installed Ubuntu 10.10 but there was a problem with the login screen (When the Ubuntu logo should be displayed, it wasn't, instead it would just say "Ubuntu 10.10") so I decided to reinstall Ubuntu 10.10 with the CD that arrived a few days later. Whenever it's finishing the installation, the installer (ubiquity) crashes, or sometimes it gets to the part where the boot loader should be installed and for some reason it is unable to install the boot loader (if I choose not to install it, I don't get how to start Ubuntu, since you have to reboot my laptop after the installation is over). I'm currently running Ubuntu 10.10 from the CD I ordered, since I have no other OS on this laptop.

  Read the article

• lubuntu - Sound card detected but no sound

  - by CookieMonster

  I installed Lubuntu 12.10 on my old laptop (Sharp Mebius PC-MR80J), but sound does not work. Here are things I tried. aplay -l does not output anything. When I run alsamixer, I see only one bar that says "Beep". I installed pavucontrol, pulseaudio, pulseaudio-utils and libgtk-3-0 and checked output devices, but I only see "Dummy ouput" and there is no hardware output devices. cat /proc/asound/cards returns the following. 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfeb38000 irq 40 cat /proc/asound/devices outputs the following. 1: : sequencer 2: [ 0- 1]: hardware dependent 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer The laptop was running Windows XP before and sound (both input and outpu) was working. What can I do now?

  Read the article

• cpu usage and near to crash when i plug in the power cable

  - by mohamad

  i have had this problem since i installed ubuntu 12.4 on my laptop (on all of distro i have this problem execpt of backtrack) my problem is when i start my linux while it connect to power source there is no problem everything works fine . but when i disconnect and wants to work with battery it crash i mean everything work tooooo slowly and my cpu usage goes to 100 ... it happen too when i start my linux with battery and want to connect the power source to it .... it happens again . i updated my distro and now on i have 12.10 on my laptop but it has this problem . my lap top is hp probook 4520s my graphic card is ati radeon 530 v and i installed catalyst control center on my lap top and it works fine but the only problem is that what i said ...is it relate to my graphic card ???

  Read the article

• Games with multiple flash files not working

  - by zlyfire

  I have download a flash game, since that's show the person coded it, and it is in multiple flash files to reduce overall file size or something. When I try to play it, I can only use the content within that one flash file, leading me to believe that it does not call upon other files within my computer. I kept the same file structure and everything as the download was, and another version of the same game I had on my windows laptop before my laptop died. It worked fine there, calling the files like it was supposed to. Is it just an Ubuntu/Linux/Unix-based bug, or is something going wrong? I've tried it in browser (firefox) and offline (gnash) and neither worked properly. Can anyone help me with this? Perhaps helping me find a way to get my game to work properly?

  Read the article

• Pygame set_colorkey transparency issues

  - by Nathan Chowning

  I'm having a strange issue that I cannot seem to remedy. I am doing some prototyping with Pygame on a desktop running windows and a laptop running OS X. Both are running python v2.7.3 (installed via homebrew for the Macbook) and pygame v1.9.1. For transparency, I have been using set_colorkey with a transparency color of (255, 0, 255). Here is the applicable code: transColor = pygame.Color(255, 0, 255) image = pygame.image.load(playerPath + "idle.png").convert() image.set_colorkey(transColor) This works flawlessly on my windows machine. On my laptop, it does not work. It just shows the hideous magenta color. Here's the strange part. If I change the transColor to (0, 0, 0), all black pixels in my images are transparent. Has anyone run into this issue before?

  Read the article

• Unable to install on a Samsung 305v5a

  - by Antony

  Have used Ubuntu for years now. Bought a Samsung 305v5a-so2 laptop yesterday. It runs an AMD A8 quadcore. I have a CD of 10.04 and as I am not clear about whether to install 32 or 64 bit I thought I would run the trial of ubuntu from the cd to see it. After about 30m started getting Authentification Failure messages. Squashfs-error Unable to read fragment cash entry Then a zillion Buffer Logical error messages like 17,000+ Should I go download 11.10, in 32bit or go and try the 64bit. Really don't want to screw the new laptop already but aint gonna wanna work with w7 either. Thanks for any help

  Read the article

• Ubuntu 12 installation problem

  - by Blisk

  I have made about 30 copies of the Ubuntu installation CD, but there is no way to install it on my laptop. I get a black screen with a blinking cursor or I get a /casper/vmlinuz file not found or I get Invalid or corrupt kernel image. I tried all solutions that I found but no way to install ubuntu on this laptop. I tried both 32 bit and 64 bit versions, I tried ubuntu 11, and no way to install it. Only If I install windows first and than can I install it with wubi. But that is not an ideal solution. That is linux installed on windows. If I install any other distributions of linux the installation works ok. So there must be some issue with ubuntu!

  Read the article

• Packard Bell Easynote NJ65 not saving gamma Setup.

  - by Pablo Gomez

  Hi. There seems to be a issue with the Easynote range of PB laptops. Since Ubuntu 10.10 does not use a Xorg.conf file to save your gamma / resolution /brightness setting, everytime I turn on my laptop I have to open up a terminal window and use the x-gamma command to set it up to my personal preference. Is there a way to create a configuration file which can save that into the system everytime I load up the OS? When I used to have a Compaq Presario (an F564LA with integrated nVIDIA graphics), I could save a config. file into the system which loaded up everything on startup To those who don't know the spec's for a NJ65 laptop, I'll provide them Processor: Intel® Pentium Dual Core @ 2.2 GHZ Video: Integrated Intel® GMA 4500MHD graphics HDD: 320GB SATA RAM: 2GB DDR2

  Read the article

• Ubiquity crashes when installing Ubuntu 10.10 from CD

  - by Ashes

  I didn't want to take any risks so I ordered a CD from Canonical to get Ubuntu. Thing is, another CD was given to me about 2 days before the CD from Canonical got to me, so I installed Ubuntu 10.10 but there was a problem with the login screen (When the Ubuntu logo should be displayed, it wasn't, instead it would just say "Ubuntu 10.10") so I decided to reinstall Ubuntu 10.10 with the CD that arrived a few days later. Whenever it's finishing the installation, the installer (ubiquity) crashes, or sometimes it gets to the part where the boot loader should be installed and for some reason it is unable to install the boot loader (if I choose not to install it, I don't get how to start Ubuntu, since you have to reboot my laptop after the installation is over). I'm currently running Ubuntu 10.10 from the CD I ordered, since I have no other OS on this laptop.

  Read the article

• List of drivers for Samsung NP300E5Z-S08IN

  - by deostroll

  I am looking for a list of drivers for my samsung model mentioned in the title. For specs please visit the website. The laptop came with a version of free-dos installed. I overwrote that one with windows 7 entirely. The laptop also had shipped with it a software cd which had some driver software. Below are the list of software; I want to know the list of equivalent software I can get for ubuntu from the repo. Would want the list for Ubuntu 12.04 Chipset driver Intel ME Interface Driver Intel Rapid Storate Technology Graphics Driver NVidia graphics driver sound driver Lan driver wireless lan driver bluetooth driver touchpad driver Ps: don't forget to check the website for the specs

  Read the article

• How can I put Fedora GUI onto Ubuntu?

  - by Dareleth

  Okay, I'm pretty new to Linux-based systems, so if I say something wrong or ask something dumb, please bear with me. I have a project for school that requires some extensive work inside of the latest version of Fedora including screenshots of rather specific things. The VM system at my school runs Fedora 20 like a snail high on paint fumes, and my laptop's VirtualBox doesn't recognize the ISO I got from the official Fedora site, so I feel like I'm out of alternatives aside from formatting over Ubuntu. I'd rather not do that, as I rather enjoy this distro. I am running Ubuntu 14.04 on my laptop. At my login screen, I have the much appreciated option of selecting between a couple of GUI's--specifically, Ubuntu, GNOME, and Cinnamon. I would like to get the Fedora GUI added to this list, but I don't know where to start or if it's even an option. Any and all help is appreciated.

  Read the article

• HDMI port not recognized on Sony Vaio

  - by julio

  I am running Ubuntu 11.10 64bit with a Sony VAIO VPC F11. It has an NVIDIA GeForce 310M video card, with the latest Nvidia drivers for the 64 bit linux, and a Windows partition with Win7 64bit. NVIDIA driver version is NVIDIA-Linux-x86_64-280.13 External monitor is Samsung SyncMaster P2770 If I boot into the Windows partition, the HDMI works as expected, with sound and video-- under linux, the HDMI port is not recognized at all, apparently, and provides no signal to the attached monitor. The nividia-settings tool does not recognize any monitor connected to the HDMI port. Disper is installed and cannot recognize an attached external monitor. Can anyone help me diagnose this issue and fix it if possible? The laptop has only the one HDMI port to connect any external monitor, so it I can't get this working I'm stuck using either the laptop screen or Windows. Thanks

  Read the article

• Replace Broadcom "wl" driver with "b43"

  - by Laszlo Boros

  I'm using Ubuntu 10.04.4 LTS, and in my laptop there is a Broadcom BCM4312 wlan card. lspci output: 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) Subsystem: Broadcom Corporation Device 04b5 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f4500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 81-ac-1d-ff-ff-12-54-92 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, ssb So as you can see, the current (and default) driver is wl - installed with jockey. But I have another Ubuntu based distribution on my laptop (BackTrack linux), which is also 10.04, but it has the b43 driver installed and the overall performance is MUCH better. So I would like to install it on this OS too, but even google didn't help me. So my question is how to install the latest b43 driver on my Ubuntu?

  Read the article

• Problem mounting USB Mobile Broadband dongle in Ubuntu 13.04

  - by Still A Learner

  I have been using Ubuntu 13.04 since last two months and I have problem mounting my USB dongle. I have Lenovo G-580 series laptop. It has 3 USB ports which are 3.0. When I attach dongle to one of the three USB ports the device gets mounted immediately but in the other two ports I have to reboot the OS while the dongle is attached to the laptop in order to mount it and connect to the internet. My dongle is of ZTE. I don't get what is going wrong.

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >