Search Results

Search found 8825 results on 353 pages for 'matt 50'.

Page 105/353 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • Dell PowerEdge 6850 Degraded HDD

    - by Matt
    Good Morning, We have a dell power edge 6850 with a degraded drive in the RAID array. I have never had to recover such an issue, so any help or advice would be welcome. Basically it hasn't affected the server at an operating system level, but has slowed down performance, I have a replacement drive in hand but as this is our main database server I want to proceed with extreme caution. My options as I see them are - Can I just hot swap the degraded drive with the new one and the data will automatically re-sync and we are all back to normal presumably this is dependant on the current raid configuration? reading various comments on-line I may need to re-configure the RAID array and re-build the broken drive? This screams disaster to me with the main worry being that I wipe any other data. Option 1 would of course make my day. Thanks in advance

    Read the article

  • What could be wrong with my VLAN?

    - by Matt
    I've got a VLAN 10 setup as a management VLAN. The management VLAN comes off port 48 and links to another set of switches that do not support VLAN's so it was I believe set up as an untagged access port. In the past this was a different brand of switch and this worked fine. However, since changing to the HP V1910-48G series I can't seem to get this working. I must point out that as far as I'm aware it is wired up properly (I can't check this physically as I'm working remote and have asked the tech who's got access to double check for me). Now I don't have a huge amount of experience with VLAN environments but AFAIK this is right. I've set the port 48 (linked to the management switches) as an untagged port with PVID 10 and access link type. Is this all I'd need to do from a configuration perspective to ensure all devices connected to port 48 would end up being on VLAN 10 and not needing to tag their frames. i.e. the tag would be added by the switch before being forwarded.

    Read the article

  • Locking down firmware to keep stolen laptop from being formatted?

    - by Matt Ridge
    On the Mac laptops there are ways through the terminal to lock down the computer so that if someone tries to format the computer they won't be able to do it without the password. This way locks down the firmware. Is there a universal way to do the same thing on a PC? I know there are brands out there such as Samsung, Dell, etc that utilize different fimware types, and in turn will mean that their firmware will be locked down differently. That being said is there a "command code" that will allow you to lock the firmware to keep theives from formatting the hard drive and wiping out your data? I know a person who has time, and knowledge can get any password, and hopefully the person is smart enough to use another password to lock down the firmware, but that's not what I'm asking. I'm asking if it's possible, and if so how? Does the standard PC user require a 3rd party app, or can it be done through the command line? Or Terminal if you are on Linux?

    Read the article

  • Re-downloading accidentally deleted podcasts in iTunes

    - by Matt
    I deleted some previously deleted podcast episodes in iTunes 9 and I'd like to re-download them. (I don't want to manually re-download them because then they won't show up in the podcast's list in the iTunes Podcast section.) I've read http://blog.krisgielen.be/archives/54 as well as Way to get old podcasts in iTunes where the suggestion is to delete the iTunes entries for the podcasts I'd like to recover, then hold shift while re-opening that podcast's little triangle icon. Here's the problem though: holding shift and re-opening the triangle tells iTunes to refresh the RSS feed, and it's possible that the RSS feed no longer contains the item you want. What I'm really looking for is a means of getting the "Get" button (that normally appears on un-downloaded podcasts) to reappear on the episodes I've previously downloaded but deleted.

    Read the article

  • Looking for personal scheduling software / todo list with rather particular requirements

    - by Cthulhu
    I've been scouring the web for a couple of (my boss') hours, looking for a piece of software that can organize my tasks in two ways. First, I have a list of bullet points / todo items I can do at any given time. Think of stuff like solve issue X, ask X about Y, write documentation about Z, etcetera. Second, I have a number of running projects I'd like to organize better, as in schedule for a certain part of a day of the week. Ideally (I think), my day would be organized as 50% spent on projects and 50% on the other small things. Now, I don't like most calendar applications (such as Outlook & friends), their UI is too 'official', not really easy to move stuff around (in my experience). I don't like most todo lists either, too static and things. I like new, fast and hip software. I've looked at GTD versions of Tiddlywiki, and I like mGSD for one particular feature. You can make lists of tasks and basically give them one of three statusses - Now (nothing required, you can do it right away), Waiting (you need someone or something before you can work on this), or the most gratifying of all, Done. I like that feature because it's a simple todo list, but indicates more accurately the things you can do right now and the things you depend on someone else for to do. Anyways, that's just a small aspect of that program - most of the other things in there I can't find a particularly good use for. If there's something like that (maybe something that works even snappier, cleaner UI), combined with an easy to use bit of scheduling software (optionally separated into two applications, but preferrably not), I think I'd like that. (Besides something like that, I also use several instances of Trac to monitor tasks and bugs and things for the various clients and projects I have to serve, and TaskCoach to monitor the amount of time I spend on each task / each client. An easy / low-maintenance time tracking software would be neat too) Of course, the software has to be free to use. I don't like shareware, trials, limited software and the like. I could develop my own too, but I'm lazy like that and there's a dozen other projects I'd like to do in my free time (neither of which I actually do). Edit: I like David Seah's printable CEO stuff, if something like that (with some video game / instant achievement / gratification) exists in software, it'd be awesome.

    Read the article

  • Windows 7 accounts on a 2008r2 DC keep getting locked out randomly

    - by Matt
    As the title states, this happens randomly to Windows 7 accounts on our Windows 2008R2 domain controller. We just had this start happening after changing from 123together hosted exchange to Rackspace hosted exchange. Also around this time our passwords on the DC started expiring, but not the exact day, and everyone has different days they need to change it before. It has only affected 10 out of 30 accounts, and I see no link between them. What are some fixes I should run or things to look for?

    Read the article

  • always true rewritecond

    - by Matt
    My university provides a public_html file in each student's Linux directory so tat each student can have a webpage. I want to put all my PHP scripts into that file and place the index in a sub-directory called webroot. I'm trying to work out a way to have an .htaccess file in the public_html that will redirect ALL requests in that folder to be redirected. There's lots of advice on redirecting any file that doesn't exists but I want to redirect regardless of the existence of a file. Can I use something like RewriteCond TRUE?

    Read the article

  • Software that will burn DVDs with a SFV or Pararchive file for each disc?

    - by Matt
    I'd like to burn several thousand RAW files (.DNG) of around 10-30 MB each to DVD to backup my photo archive. I'm looking for software that can do this and include an SFV-type file on each disc burnt. These are my requirements: compression is optional, and probably not desirable due to the extra time involved files should be spread amongst the discs as self-contained units, i.e. I don't want to have to load files from more than one disc to be able to read the files on that disc, so that excludes WinRAR's spanning options I don't want to spend time writing ISO images first as this will be a task I'll need to repeat often as I add new images to my archive - the software should write to the DVDs for me as simply as possible I'd like the SFV/Pararchive/recovery record to be stored with the files on each disc, so it only references the files on that particular disk Thanks in advance!

    Read the article

  • What is the best way to determine what's locking up SQL Server using a query?

    - by Aplato
    Recently our SQL Server is getting bogged down by something. I was wondering what is the best way to check what could be causing the problem by querying the database. This is the best I've found so far: SELECT SPID = s.spid , BlockingSPID = s.blocked , DatabaseName = DB_NAME(s.dbid) , ProgramName = s.program_name , [Status] = s.[status] , LoginName = s.loginame , ObjectName = OBJECT_NAME(objectid, s.dbid) , [Definition] = CAST([text] AS VARCHAR(MAX)) FROM sys.sysprocesses s CROSS APPLY sys.dm_exec_sql_text (sql_handle) WHERE s.spid > 50 ORDER BY DatabaseName , loginName

    Read the article

  • Display stretches 4:3 ratios; Adds scrolling to other ratios

    - by Matt
    I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

    Read the article

  • Application windows have colossal fonts in Enlightenment 17, while system windows are untouched

    - by Matt
    I'm trying to get used to using Enlightenment instead of KDE on my Slackware64 multilib computer, but I'm having a terrible time getting one problem fixed. My fonts are HUGE on application windows - from Firefox to Gimp to Xchat to anything else, all the fonts are 3x the size they should be. But at the same time, the system menu is the correct size. I'm at a loss - I want the applications to have the same DPI as the system menu. When I'm in KDE, they all look normal. I've included a screenshot to show what I'm talking about.

    Read the article

  • hardware: delay and distinct 'click' before hard drive access

    - by matt lohkamp
    I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

    Read the article

  • Understanding connection tracking in iptables

    - by Matt
    I'm after some clarification of the state/connection tracking in iptables. What is the difference between these rules? iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT Is connection tracking turned on when a packet is first matched containing -m state --state BLA , or is connection tracking always on? Can/Should connection state be used for fast matching like below? e.g. suppose this is some sort of router/firewall (no nat). # Default DROP policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Drop invalid iptables -A FORWARD -m state --state INVALID -j DROP # Accept established,related connections iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow ssh through, track connection iptables -A FORWARD -p tcp --syn --dport 22 -m state --state NEW -j ACCEPT

    Read the article

  • Mapped network drive missing from My Computer and Explorer

    - by matt wilkie
    On a Windows XP Pro SP3 machine one network drive refuses to show up in My Computer or Explorer. The missing drive letter is G:, if that matters. Other mappings work fine. Other profiles one the same machine have no problem mapping G:. I can access the G: just fine typing it into the address bar or in CMD shell. I've used TweakUI to toggle hide/show G: with no difference. TweakUI says G: should be visible. I've logged off,on between toggles to make sure the settings are taking effect. I've looked at reg key [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] and made sure it's zero'd. [insert ref link here] We've limped along with this broken setup for some time, just working around it, but some applications do not allow typing in a path when choosing a place to save files and it's reached the point where it's intolerable. So, anyone have any idea why XP won't show this drive letter? or how to fix it?

    Read the article

  • How do I Implement Per VLAN Rate Limiting or QOS for a Cisco 2960?

    - by evolvd
    I have a 2960 that I need to limit the uplink port to 50Mbps for 3 vlans and 350Mbps for another vlan. Would the following config achieve that or is this even possible for the 2960? class-map match-any VLAN50-51-52 match vlan 50-52 class-map match-any VLAN53 match vlan 53 policy-map 50MB_RATE_LIMIT class VLAN50-51-52 police 50000000 5000000 exceed-action drop class VLAN53 police 350000000 35000000 exceed-action drop ! interface GigabitEthernet0/23 service-policy output 50MB_RATE_LIMIT service-policy input 50MB_RATE_LIMIT

    Read the article

  • Port mirroring on multiple switches

    - by Matt
    So here is the deal, I have a server on switch A where port 3 is monitoring traffic for most of the ports on switch A. However I have other users on switch B that needs to have port 3 on switch A monitor as well. Is this possible? I have been reading about rspan but doesnt seem to work. Switch A: monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 (this works great for switch A, I need a solution to get switch B to also have some ports sent to port 3 on switch A for monitoring.) Onxx, All the traffic on switch A is fine, there will be about 10-15 ports on switch B that I need to send to fa0/3 on switch A as the destination. I have the switches connected with a ethernet cable with a trunk port on both switches on port 48 on switch B and A and port 47 on A connects to our sonicwall. So I am assuming they are daisy chained? What if I did the following: Switch A monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 Put all of the ports on vlan 10 because I made an rspan vlan 10 On switch B monitor the ports I need will say 1-10 monitor session 1 source interface fast0/1 - 10 monitor session 1 destination remote vlan 10 as a prerequisite I would have created vlan 10 as a rspan vlan on switch B. Switch A Monitor session 1 destination remote vlan 10 Would this work? By the way I am working with cisco catalyst 3560 switches.

    Read the article

  • What is causing my internet to be slow on one laptop but not the other and only at a distance?

    - by Matt Case
    I have a newer laptop, purchased within the last year (acer aspire 7740). This laptop does not have any problem connecting to wireless networks and indicates that the signal strength is excellent on most of the wireless networks I connect to. When the laptop is within 10 feet of my wireless router it gets 30 down 10 up. When it is farther away than 10 feet it will be lucky to get 3 down and 1 up. I also have an older laptop, purchased in 2005, that has no problems at all at the same range. None of my phones, gaming consoles or tablets have this problem. I am beginning to think that the problem must be some hardware defect with the wireless card. I can provide additional information if needed. Just thought I'd check to see what others thought because I've been working on computers my whole life and have never heard of this happening. I have also tried to change the channels on my wireless router and have had no success with this idea.

    Read the article

  • A gigabit network interface is CPU-limited to 25MB/s. How can I maximize the throughput?

    - by netvope
    I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? As a reference, the other computers in the network can usually transfer at 50+MB/s without problems. A computer with a Core 2 CPU generates only 5000 interrupts per second when it's transferring at 110MB/s. The number of interrupts is about 20 times less than the Atom system (if interrupts scale linearly with throughput.) And a minor question: How can I find out what is the driver in use for eth0?

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >