Search Results

Search found 11124 results on 445 pages for 'optical drive'.

Page 105/445 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• HDD not detected whenever first power on (detected at BIOS level)

  - by Alvin Lim

  I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

  Read the article

• New power supply and now HDDs are not recognized

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• How do I recover a RAID 1 volume on Mac OS X (10.7)?

  - by Avry

  I have a Synology NAS that I've set up with RAID 1. The device is set up with two drives, both the same size (i.e. 500 GB each), formatted in ext3, as a RAID 1 volume (i.e. even though the total capacity is 1TB, I effectively only get 500 GB). In the case of a device failure where I can only access one of the drives, how can I recover my data? The solution I'm looking for is something like: 'Put the working drive in an enclosure, and use <some software> to recover your data.'

  Read the article

• Accidentally deleted the software for MyPassport Essential SE 1TB Hardrive

  - by user26192

  I'm posting for a friend of mine. She bought a WD MyPassport Essential SE 1 TB Hard drive the other day. When she plugged in the USB in her lap top, the driver cannot be recognized by the smart ware software. While she was doing a back up of her files, McAfee was running in the background. Since the backup was taking so long to finish, she decided to pause it. She tried to delete the partially backed up files, but instead, she accidentally deleted the entire file in the folder including the pre-installed software. Now, when she tries to start up the MyPassport, the smart ware doesn't show up anymore. Can someone please give us advice what can she do about this? Thank you.

  Read the article

• Easiest way to move my Windows installation to an SSD?

  - by Jon Artus

  I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device. I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?

  Read the article

• Use Windows 7 offline sync with external usb hd

  - by René

  Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

  Read the article

• Failing Seagate HDD - Not Recognised

  - by thefragileomen

  I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

  Read the article

• 4K sectors transition: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors?

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the long-standing standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Computer temporarily freezes and then resumes

  - by trizicus

  This happens on ALL operating systems (7, Ubuntu, etc.). What happens is everything for 1-3 seconds becomes unresponsive, I then hear what sounds like my other internal hard drive 'spinning up', and then viola everything is responsive again. Note: Already ran SMART tests, no issues at all. I think issue is that the HDD spins down and when need it gets 'turned-on' (OS settings turn off HDD's after 20 mins of inactivity) and because my pagefile is on the other HDD it causes OS to temporarily freeze. Need more tips, and insight. Thanks More info: Running Quad CPU, 4GB RAM, Intel SSD, GT 240.

  Read the article

• Can a RAID 0 disk/config be rebuilt ?

  - by Rogue

  Recently one of the hard drives of one of my RAID 0 configuration gave an error. What do I do now I'm hoping that I can replace that faulty disk with a new hard drive and that the RAID can rebuild itself. (using Intel Matrix Storage Console) Is this possible? Though I doubt it. Is there anyway that I can rebuild the RAID? or have I lost all the matter on it. TECH INFO: I have a software raid on an Intel DG965WH motherboard and the current operating system is Windows

  Read the article

• Where does truecrypt store the backup volume header?

  - by happygolucky

  When using WDE, where does (if anywhere) truecrypt store a backup volume header? As i know there is always a backup header for regular truecrypt volumes, however i am not sure if this applies when system encryption is used. Because if i damage the volume header in track 0, my password won't boot my system anymore. So there is no backup header on the drive? I read somewhere on a forum that truecrypt might have a backup header relative to some position from the END of the HDD, however this doesn't make sense as it could easily be wiped over by programs running in Windows. And how would truecrypt know where this backup is anyway?

  Read the article

• Broken screen on laptop?

  - by John

  I recently damaged the screen on my HP Notebook...now my main concern is that I have Roboform installed and on my taskbar. The trouble is, because the screen is totaled, I can't see anything, and I discovered, to my horror, that I haven't backed any of the IDs and passwords up to a text document. Of course, I cannot access any of my content that hosts an ID name and password at all unless I can access Roboform that is installed on the notebook! Now hopefully I have ordered a SATA/USB cable to access the hard drive that I now removed form the notebook will I be able to access roboform that way and ALL the log-in details?

  Read the article

• Motherboard: Intel S5520HCR s1366 SSI EEB

  - by Crazy_Bash

  I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

  Read the article

• Can a RAID 0 disk be rebuilt

  - by Rogue

  Recently one of the hard drives of one of my RAID 0 configuration gave an error. What do I do now I'm hoping that I can replace that faulty disk with a new hard drive and that the RAID can rebuild itself. (using Intel Matrix Storage Console) Is this possible? Though I doubt it. Is there anyway that I can rebuild the RAID? or have I lost all the matter on it. TECH INFO: I have a software raid on an Intel DG965WH motherboard and the current operating system is Windows

  Read the article

• Windows doesn't recognise my USB key anymore (it used to work)

  - by dominicbri7

  I use my friend's USB flash drive (Corsair flash voyager 16gb) to transfer files from my laptop to my desktop computer. However, since a couple of days my laptop stopped recognizing the USB key.. while there is still no problems with all other computers. I use Windows 7 64 bits if that can help. I tried uninstalling the driver, rebooting and all those kind of tricks, but it won't work. When I connect it and open the "My computer" window, I see "Removable Disk (G:)" for a moment, then it disappears... then it reappears again and it keeps doing that periodically. I can't even right click then hit "Properties" because it disappears. As I recall, it DOES work on every other computers, I think it has to do with the driver but what can I do?

  Read the article

• Windows 8 Installation Fails

  - by HackToHell

  I have the Windows 8 32-bit ISO which fails to install when booted from a USB flash drive. It copies the files, the boot loader installs, but the install hangs when I boot into Windows 8 for the first time--it simply keeps on spinning forever. The Windows 8 Release Preview does not work either. I did a VHD install of Windows 8 Developer Preview and it installed fine. Looking at the partition from Windows 7, I can see that the files are present. What could be the problem?

  Read the article

• How badly do SSDs degrade without TRIM?

  - by joev

  SSDs have been out for a few years, and have seen all kinds of usage patterns. Windows and Linux support the TRIM command, with Mac OS still trailing behind here. Update (2 Aug 2011): It appears OSX Lion has support for TRIM in Apple-branded SSDs. There is a utility that enables TRIM in non-Apple SSDs I'm sure plenty of Mac users (and pre-TRIM version of Win/Linux) have SSDs. So, to you folks: have you noticed a degradation of SSD performance during its lifetime? How long have you been using the SSD, and how bad is the degradation? I'm assuming that even at its most degraded state, a modern SSD would still smoke a traditional hard drive in terms of performance.

  Read the article

• Problem with running a flash Program from pendrive

  - by rajivpradeep

  Hi, I have a USB drive with two partitions in it. one hidden and the other normal. i have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on windows7 and when run on WINXp, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when i copy the application to desktop and run , it runs with no glitch I was facing the same problem on WIN7 too , but it was running as required when i ran it using "Run in Xp mode" and then i applied a SHIM and is running since then as required. the application is built using VC++ 2008 , What might be the problem.

  Read the article

• Windows has automatically mapped my network drives to my local disk - how do I stop it doing so?

  - by cyborg

  Windows XP decided when I logged on that because the network was unavailable at the time that two of my network drives should be mapped to my local drive so that data would be saved. All well and good but I need it to stop now so I can use my network drives again. I can't find anything relating to the feature but I can't remember the specifics of the message it gave me when it started this operating mode and Google searches for the sort of terms above leads me to a slew of irrelevancies. Any ideas? Thanks.

  Read the article

• NVidia raid 5 array spooling sounds and delay

  - by Chase B. Gale

  I've had a raid 5 array setup with 3 2TB WD Green drives for about 3 years now. Starting last week, when I would access the array for the first time, I hear a loud drive spooling sound and experience a ~5 second delay before being able to access\save files. This behavior happens when I don't use the array for some time (about an hour) and after occurring it doesn't happen again if I continue to access the array. I've run SMART scans on all drives and they come back as being a-ok. What's causing this? Is my array getting close to death?

  Read the article

• my partition has lost

  - by Mahmoud20070

  The problem begins here: http://askubuntu.com/questions/118224/i-have-big-problem-with-mount-partition. I tried to solve the problem by myself, but I messed up. I opened gparted magic and opened my hard disk and chose Create Partition Table and the disaster was done. All the partitions on my hard disk (500 GB) have been removed. What can I do? I tried to use PTDD Partition Table Doctor 3.5, but it didn't help. This drive had important data that I need to get back.

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >