Search Results

Search found 170665 results on 6827 pages for 'uk sql server user group'.

Page 105/6827 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

    - by milkandtang
    I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

    Read the article

  • Find Rules and Defaults using the PowerShell for SQL Server 2008 Provider

    - by BuckWoody
    I ran into an issue the other day where I couldn't set up some features in SQL Server 2008 because they ddon't support the use of Rules or Defaults. Let me explain a little more about that. In older versions of SQL Server, you could decalre a "Rule" or "Default" just like you do with a Table Constraint today. You would then "bind" these rules or defaults to the tables you wanted them to apply to. Sure, there are advantages and disadvantages to this approach, but it certainly isn't standard Data Definition Language (DDL), so they are deprecated and many features don't work with them any more. Honestly, it's been so long since I've seen them in use I had forgotten to even check for them. My suspicion is that this was a new database created with an older script. Nevertheless, the feature failed when it ran into one. Immediately I thought that I had better build some logic into my process to try and catch those - but how? Lots of choices here, but since I was using PowerShell to do the rest of the work, I thought I would investigate how easy it would be just to do it there. And using the SQL Server 2008 provider, this could not be simpler. I won't show all of the scrupt here, because I was testing for these as a condition and then bailing out of the script and sending a notification, but all it is using is the DIR command! Here's an example on my "UNIVAC" computer for the "pubs" database: Find Rules using PowerShell: dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Rulesdir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases\pubs\Defaults And this one will look in all databases:  #All Databases:dir SQLSERVER:\SQL\UNIVAC\DEFAULT\Databases | select-object -property Name, Rules, Defaults Awesome. Love me some PowerShell. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Stairway to T-SQL DML Level 4: The Mathematics of SQL: Part 1

    A relational database contains tables that relate to each other by key values. When querying data from these related tables you may choose to select data from a single table or many tables. If you select data from many tables, you normally join those tables together using specified join criteria. The concepts of selecting data from tables and joining tables together is all about managing and manipulating sets of data. In Level 4 of this Stairway we will explore the concepts of set theory and mathematical operators to join, merge, and return data from multiple SQL Server tables. Get Smart with SQL Backup Pro Powerful centralised management, encryption and more.SQL Backup Pro was the smartest kid at school Discover why.

    Read the article

  • Synchronizing Mysql Table Schema [on hold]

    - by user1122069
    I have some difficulty keeping track of my SQL changes in a text file in SVN. One solution that I am aware of is to put the SQL queries in files (1.sql, 2.sql...) and to manually load each file at the proper time. Besides missing commas, the process is too cumbersome when builds become more frequent. I have actually taken to asking a co-worker to send me his SQL changes on Skype and we just apply the changes immediately on our local, development, and production servers (using three PhpMyAdmin tabs). I have seen several GUI tools mentioned in similar questions on SO, but these are actually more work and less automated than the aforementioned methods. Is there any standardized process by which this is done in an automated way? I can only guess that large companies build their own mechanisms of keeping track of database schema changes (yet I can't find a word about it - maybe they use files?). This question was closed as off-topic on Stack Overflow, so I am re-posting it here.

    Read the article

  • Need a set based solution to group rows

    - by KM
    I need to group a set of rows based on the Category column, and also limit the combined rows based on the SUM(Number) column to be less than or equal to the @Limit value. For each distinct Category column I need to identify "buckets" that are <=@limit. If the SUM(Number) of all the rows for a Category column are <=@Limit then there will be only 1 bucket for that Category value (like 'CCCC' in the sample data). However if the SUM(Number)@limit, then there will be multiple bucket rows for that Category value (like 'AAAA' in the sample data), and each bucket must be <=@Limit. There can be as many buckets as necessary. Also, look at Category value 'DDDD', its one row is greater than @Limit all by itself, and gets split into two rows in the result set. Given this simplified data: DECLARE @Detail table (DetailID int primary key, Category char(4), Number int) SET NOCOUNT ON INSERT @Detail VALUES ( 1, 'AAAA',100) INSERT @Detail VALUES ( 2, 'AAAA', 50) INSERT @Detail VALUES ( 3, 'AAAA',300) INSERT @Detail VALUES ( 4, 'AAAA',200) INSERT @Detail VALUES ( 5, 'BBBB',500) INSERT @Detail VALUES ( 6, 'CCCC',200) INSERT @Detail VALUES ( 7, 'CCCC',100) INSERT @Detail VALUES ( 8, 'CCCC', 50) INSERT @Detail VALUES ( 9, 'DDDD',800) INSERT @Detail VALUES (10, 'EEEE',100) SET NOCOUNT OFF DECLARE @Limit int SET @Limit=500 I need one of these result set: DetailID Bucket | DetailID Category Bucket -------- ------ | -------- -------- ------ 1 1 | 1 'AAAA' 1 2 1 | 2 'AAAA' 1 3 1 | 3 'AAAA' 1 4 2 | 4 'AAAA' 2 5 3 OR 5 'BBBB' 1 6 4 | 6 'CCCC' 1 7 4 | 7 'CCCC' 1 8 4 | 8 'CCCC' 1 9 5 | 9 'DDDD' 1 9 6 | 9 'DDDD' 2 10 7 | 10 'EEEE' 1

    Read the article

  • RRAS won’t start with 8007042a or event ID 7024, aka the “routing remote access unable to load Iprtrmgr.dll”

    - by KCotreau
    History: The history of this error, which has mostly gone unsolved, dates back to Windows 2000. Platforms affected: Windows Server 2008 R2, Server 2008, Server 2003 R2, Server 2003, Server 2000 (both 32-bit and 64-bit installs are affected). Error Messages Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 2 (0x2). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 31 (0x1F). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 20205 (0x4EED). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 193 (0xC1). Event ID: 20103 Unable to load C:\WINDOWS\System32\iprtrmgr.dll . (32-bit installs). Event ID: 20103 Unable to load C:\WINDOWS\SysWOW64\iprtrmgr.dll . (64-bit installs).

    Read the article

  • can't connect to Sql Sever Management Express 2012

    - by Rare-Man
    i installed Sql Sever Management Express 2012 , but when i try to connect in Sql management studio enviroment , i have this error . TITLE: Connect to Server Cannot connect to .. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476 The system cannot find the file specified BUTTONS: OK ................................................................................... and in during installion i dont have option for select cluster !! this is my SQL Server Configuration Manager , my sql server service is empty ... And when get Remove a Failover Cluster Node , this error happened . http://oi57.tinypic.com/2lrvat.jpg

    Read the article

  • How do I restore a database on a remote SQL server 2005 from a local backup?

    - by MatsT
    I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

    Read the article

  • How do I restore a database on a remote SQL server 2005 from a local backup?

    - by MatsT
    I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

    Read the article

  • Lync using SQL 2008 R2 SP1 - Publish Topology error

    - by EKS
    Error that shows in the web page opened by the Topology builder: Error: An error occurred: "Microsoft.Rtc.Common.Data.SqlConnectionException" "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" Looking in the log file: ( I assume this is the acutal error making it STOP) Installed SQL Server 2005 Backward Compatibility version is 8.05.1054 Error: SQL Server 2005 Backward Compatibility is not installed or its version is not high enough. SQL Server 2005 Backward Compatability SP2 or higher must be installed. I have installed SQLServer2005_BC_x64.msi from MS, and cant seem to find this SP2 version. SQL server is a 2008 R2 SP1. I have also tested with a 2008 SP3 SQL server same error. Named pippes output via ( OSQL /L) SQL-2008-1 SQL2

    Read the article

  • OLTP Sql Server RAID configuration with 10 disks, allocation Unit and disk stripe size

    - by Chris Wood
    On a new db server I only have 10 disks to play with, The usage is about a booking every 3-5 seconds, so not high volume, I know compromises have to be made, but my initial thoughts are - DISK 1 & 2 - RAID 1 - OS DISKS 3,4,5,6 - RAID 10 - Data, Indexes & TempDB DISKS 7,8,9,10 - RAID 10 - Logs & Backup Full backups will take place when there is virtually no traffic on the website so not bothered about the contention with the logs. disk 3-10 - 8kb NTFS unit allocation size disk 3-10 - 64kb Disk Stripe size does this seems to be sensible, any other considerations I have omitted ? thanks

    Read the article

  • Terminal Server in Windows Server 2003

    - by Hemal
    I have a confusion regarding what I am doing here. At present I have a Windows Server 2003 server with SP2. I have assigned RAS/VPN server role to it (through Manage my server wizard) and in my router, I setup the IP address of my RAS/VPN server as PPTP server. Staff leave their workstations ON all the time and access them from home through RDP. They first connect thorugh VPN & in the RDC they simply type their respective IP or computer name to access the office network from home. Everything works fine so far except: Staff have to leave compuers always ON in the office Speed is very slow depend how many staff members access the VPN network I was told to install and configure Terminal service to improve this situation. I already added TS Role in the server but I don't know how to clients can access the TS server from home or remote location. I really appreciate any good links or guidence from the experts in this group regarding this. Thank you in advance for any replies!

    Read the article

  • Online Windows Server Virtual Hard Drive Images for Use with VMWare Server 1.0

    - by charfeddine.ahmed
    Hello there, I have a remote Server running the VMWare hypervisor. I want to create a virtual machine running Windows Server. However I can't upload mine since my internet connection is slow (would take me days to do the upload). Microsoft has public hard drive images with Windows Server Trial on them, but they work for Virtual PC. I am looking for such files that can be used with VMWare Server. That case I can download these files directly to the server which enjoys a fast connection. Thanks in advance.

    Read the article

  • SQL connection is too slow

    - by user66905
    We have a business web application in ASP.NET + SQL Server 2008. In the beginning, SQL Server and IIS were on the same machine. Now we bought another machine. Current configuration is IIS machine plus SQL Server machine, and they are connected by a 1gb LAN connection. With this configuration our web application is slower than before. Max bandwidth is 1-2% of network, about 15mbps. When we use another threads to the same SQL Server from the same IIS machine, network use is higher. So this is no problem with SQL Server. Ho we can make higher bandwidth for this SQL connection? Specs: .Net 3.5 SQL Server 2008 Standard file transfer can use 100% of LAN SQL connection by TCP/IP protocol SQL logins Pool tested with enable and

    Read the article

  • TortoiseSVN hangs in Windows Server 2012 Azure VM

    - by ZaijiaN
    Following @shanselman's article on remoting into an Azure VM for development, I spun up my own VS 2013 VM, and that image runs on WS 2012. Once I was able to remote in, I started installing all my dev tools, including Tortoise SVN 1.8.3 64bit. Things went south once I started attempting to check out code from my personal svn server. It would hang and freeze often, although sometimes it would work - I was able to partially check out projects, but I would get frequent connection time out errors. My personal svn server (VisualSVN 2.7.2) runs at home on a windows 7 machine, and I have a dyndns url pointing to it. I have also configured my router to passthrough all 443 traffic to the appropriate port on the server. I self-signed a cert and made sure it was imported into the VM cert store under trusted root authorities. I have no problems connecting to my svn server from 4-5 other computers & locations. From the Azure VM, in both IE and Chrome, I can access the repository web browser with no issues. There are no outbound firewall restrictions. I have installed other SVN add-ons for Visual Studio (AnkhSVN, VisualSVN) and attempted to connect with my svn server, with largely the same results - random and persistent connection issues (hangs/timeouts). I spun up a completely fresh WS 2008 Azure VM, and installed TortoiseSVN, and had the same results. So I'm at a loss as to what the problem is and how to fix it. Web searches on tortoisesvn and windows server issues doesn't yield any current or relevant information. At this point, i'm guessing that maybe some setting or configuration that MS Azure VM images is the culprit - although I should probably attempt to spin up my own local WS VM to rule out that it's a window server issue. Any thoughts? I hope I'm just missing something really obvious!

    Read the article

  • Windows Server 2008R2 - can't change or remove the default gateway

    - by disserman
    We've installed VMWare Server 2.0 on Windows 2008R2. After some time playing with it (actually only removing host-only and nat networks, and binding adapters to the specified vmnets) we've noticed a strange problem: if you change or remove the default gateway on the network card, the server completely loses a network connection you can't ping it from the subnet, it also can't connect to anyone. When the gateway is removed and a server tries to connect to the other machines, I can see some incoming packets using a sniffer, but I believe they are damaged in some kind (I'm not a mega-guru in TCP/IP and can't find a mistake in a binary translation of the packet) because the other side doesn't respond. What we tried: removed vmware server using add/remove programs deleted everything related to the vmware server and all installed network adapters in the windows registry double checked for the vmware bridged protocol driver file, it's physically absent and no any links in the registry. performed a tcp/ip reset with netsh and disabled/enabled all network adapters in the device manager to recreate a registry keys for them. tried another network adapter. and the situation is the same: as soon you remove or change the default gateway, windows stops working. The total absurd of the situation is that the default gateway points to the non-existing IP. But when it's set, you can ping a server from the subnet, when you remove it - you can't. Any help? I'm starting thinking the new build of the VMWare Server is some kind of the malware... :)

    Read the article

  • IPSec tunnelling with ISA Server 2000...

    - by Izhido
    Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

    Read the article

  • Install MS Office on Windows Server 2008 - in support of Quickbooks RemoteApp

    - by steampowered
    How can I install MS Office on Windows Server 2008? The purpose would be to enable Quickbooks to be able to export to Excel. Quickbooks is set up to run as a RemoteApp in a Terminal Server environment. The Quickbooks applicaiton senses whether or not Excel is installed and will not allow the user to create an Excel report unless Excel is actually installed on the client running Quickbooks. Since the client and the server are the same machine in a Terminal Server environment, Excel must be installed on Windows Server for the Quickbooks Excel exporting feature to work in this setup. There is no need to actually use Excel in a Terminal Services environment. We only need to generate the Excel files using the server, then we can use an installed version Excel on a regular Windows 7 machine to work with the Excel file. MS Office does not normally install on Windows Server. Is there any way to buy a special license? Could we somehow fool Quickbooks into thinking Excel is installed, if that would work?

    Read the article

  • Unwanted forced authentication after server restart (Win 2k3)

    - by Felthragar
    We're running a Win 2k3 R2 Standard 64-bit edition server. On this server we're running a fileserver and the ability to allow remote login to our network through vpn. We do not currently utilize a domain setup, all user accounts are local accounts on the server. Each employee is given a unique account to login to the server. The password is a randomly generated 16 character long string, which makes it hard to remember. What we've done is basicly had the password stored on the client machine (standard "Remember Me" functionality). This has worked well. However, last night our server automatically restarted after an automatic update. After that, some of our employees, myself included, had to re-authenticate with the server, submitting our credentials again. Then again, some others did not have to re-authenticate. Do you guys have any idea why this is? Is there a setting to prevent this? I've checked the logs but I couldn't find anything of interest. Then again I'm not really sure what I'm looking for. Thanks in advance, I'll try to answer any additional questions you may have. Edit: When I say "login" or "authenticate" I mean through the standard windows samba protocol. Edit 2: Ok, new day. Tonight the server restarted again, and the same two clients that had to re-authenticate yesterday had to re-authenticate today as well. The rest did not.

    Read the article

  • SQL query mixing aggregated results and single values

    - by Paul Flowerdew
    I have a table with transactions. Each transaction has a transaction ID, and accounting period (AP), and a posting value (PV), as well as other fields. Some of the IDs are duplicated, usually because the transaction was done in error. To give an example, part of the table might look like: ID PV AP 123 100 2 123 -100 5 In this case the transaction was added in AP2 then removed in AP5. Another example would be: ID PV AP 456 100 2 456 -100 5 456 100 8 In the first example, the problem is that if I am analyzing what was spent in AP2, there is a transaction in there which actually shouldn't be taken into account because it was taken out again in AP5. In the second example, the second two transactions shouldn't be taken into account because they cancel each other out. I want to label as many transactions as possible which shouldn't be taken into account as erroneous. To identify these transactions, I want to find the ones with duplicate IDs whose PVs sum to zero (like ID 123 above) or transactions where the PV of the earliest one is equal to sum(PV), as in the second example. This second condition is what is causing me grief. So far I have SELECT * FROM table WHERE table.ID IN (SELECT table.ID FROM table GROUP BY table.ID HAVING COUNT(*) > 1 AND (SUM(table.PV) = 0 OR SUM(table.PV) = <PV of first transaction in each group>)) ORDER BY table.ID; The bit in chevrons is what I'm trying to do and I'm stuck. Can I do it like this or is there some other method I can use in SQL to do this? Edit 1: Btw I forgot to say that I'm using SQL Compact 3.5, in case it matters. Edit 2: I think the code snippet above is a bit misleading. I still want to mark out transactions with duplicate IDs where sum(PV) = 0, as in the first example. But where the PV of the earliest transaction = sum(PV), as in the second example, what I actually want is to keep the earliest transaction and mark out all the others with the same ID. Sorry if that caused confusion. Edit 3: I've been playing with Clodoaldo's solution and have made some progress, but still can't get quite what I want. I'm trying to get the transactions I know for certain to be erroneous. Suppose the following transactions are also in the table: ID PV AP 789 100 2 789 200 5 789 -100 8 In this example sum(PV) < 0 and the earliest PV < sum(PV) so I don't want to mark any of these out. If I modify Clodoaldo's query as follows: select t.* from t left join ( select id, min(ap) as ap, sum(pv) as sum_pv from t group by id having sum(pv) <> 0 ) s on t.id = s.id and t.ap = s.ap and t.pv = s.sum_pv where s.id is null This gives the result ID PV AP 123 100 2 123 -100 5 456 -100 5 456 100 8 789 100 3 789 200 5 789 -100 8 Whilst the first 4 transactions are ok (they would be marked out), the 789 transactions are also there, and I don't want them. But I can't figure out how to modify the query so that they're not included. Any ideas?

    Read the article

  • Using only password to authenticate user (no "username" field)

    - by Guy
    I am creating a client access system, to allow manage invoices, make payments, access information about their products and information/functionality alike. Supposedly there are less than 1000 clients. Would there be any security threat to use only password (UUID v4 strings) to authenticate user? My thoughts: There is virtually no probability of collision or success with brute-force attack. http://en.wikipedia.org/wiki/UUID#Random%5FUUID%5Fprobability%5Fof%5Fduplicates User friendly (one click go) It is not intended to be remembered

    Read the article

  • Group Policy error 1006 with and error code 52

    - by Bernesto
    I have a hyper-v cluster operating on win2k8 R2 in a 2003 forest. These servers are at our NOC with a DC that connects to our PDC at HQ via a persistent VPN. The cluster boxes are reporting a error event ID 1006 shown below. The DC is also reporting an error 5805 also shown below. I have found numorus posts regarding 1006 errors, but none for error ID 52's. It's weird, I can ping and I can browse network shares on the DC from each. I thought maybe a DNS or net work issue, but nslook up works too. Event 1006 <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" /> <EventID>1006</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>1</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2013-12-17T00:08:19.582292600Z" /> <EventRecordID>41808</EventRecordID> <Correlation ActivityID="{26B10592-6228-4A3E-845B-E04B49702A54}" /> <Execution ProcessID="964" ThreadID="1384" /> <Channel>System</Channel> <Computer>NEOREEFVH1.neoreef.com</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="SupportInfo1">1</Data> <Data Name="SupportInfo2">5012</Data> <Data Name="ProcessingMode">0</Data> <Data Name="ProcessingTimeInMilliseconds">1138</Data> <Data Name="ErrorCode">52</Data> <Data Name="ErrorDescription">Unavailable</Data> <Data Name="DCName" /> </EventData> </Event> Event 5805 Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 5805 Date: 12/16/2013 Time: 2:32:01 PM User: N/A Computer: NEOREEFSRV15 Description: The session setup from the computer NEOREEFVH3 failed to authenticate. The following error occurred: Access is denied. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 22 00 00 c0 "..À Here are the networks on the hosts: Any with a "Enabled" Are virtual switches.

    Read the article

  • Generating the SQL query plan takes 5 minutes, the query itself runs in milliseconds. What's up?

    - by TheImirOfGroofunkistan
    I have a fairly complex (or ugly depending on how you look at it) stored procedure running on SQL Server 2008. It bases a lot of the logic on a view that has a pk table and a fk table. The fk table is left joined to the pk table slightly more than 30 times (the fk table has a poor design - it uses name value pairs that I need to flatten out. Unfortunately, it's 3rd party and I cannot change it). Anyway, it had been running fine for weeks until I periodically noticed a run that would take 3-5 minutes. It turns out that this is the time it takes to generate the query plan. Once the query plan exists and is cached, the stored procedure itself runs very efficiently. Things run smoothly until there is a reason to regenerate and cache the query plan again. Has anyone seen this? Why does it take so long to generate the plan? Are there ways to make it come up with a plan faster?

    Read the article

  • SQL Server 2008 database engine login failed for administrator user in windows 7

    - by Sadegh
    I installed SQL Server 2008 Enterprise Edition on Windows 7 Ultimate from sadegh user. This account exists in administrators role. after a few days I removed sadegh user from Windows and now I am using administrator user. But I can't login to SQL Server database engine using Windows authentication method and I receive this error message: TITLE: Connect to Server Cannot connect to SADEGH-PC. ADDITIONAL INFORMATION: Login failed for user 'Sadegh-PC\Administrator'. (Microsoft SQL Server, Error: 18456) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476 please help me! thanks

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >