Search Results

Search found 5643 results on 226 pages for 'machines'.

Page 106/226 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Double default gateway ubuntu server

  - by Elena

  Hi, I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• Reputable TabletPC vendors

  - by snorfys

  I'm developing software for tablet pcs and so far I've used some lenovo's (x41), some toshiba's (portege m200) and some gateways (M275). Granted: the machines we've gotten have predominantly been refurbs, but they're failing 80-90% of the time. Part of the reason that they're failing is users inevitably dropping them, so I'm looking at potentially some rugged tablet pcs. The problem that I'm running into is that Current tablet pcs are high spec (much higher than I'm looking for at least) The rugged tablet manufacturer space seems to be filled with lots of small companies that I don't trust yet. I'm looking for tablet PCs (keyboard or no) that can support: XP tpc (optional win 7) single core 1.5-2ghz 1gb ram wifi optional gsm optional gps very optional vehicle docking solutions The budget I've got is tight (but slightly flexible - So are there any reputable tablet pc vendors out there that can do this.

  Read the article

• Conditional hotkey or include in AutoHotKey

  - by Bowen

  Is there a way to define a Hotkey conditionally in AutoHotKey? I want to do different keyboard mappings for different machines with different physical keyboards. This is what I want to do: RegRead, ComputerName, HKEY_LOCAL_MACHINE, System\CurrentControlSet\Control\ComputerName, ComputerName If ( ComputerName = BDWELLE-DIM8300 ) { #Include %A_ScriptDir%\Mappings-BDWELLE-DIM8300.ahk } OR RegRead, ComputerName, HKEY_LOCAL_MACHINE, System\CurrentControlSet\Control\ComputerName, ComputerName If ( ComputerName = BDWELLE-DIM8300 ) { LWin::LAlt [more hotkey definitions that only apply to this machine] } but since AHK parses Hotkey definitions and #Include statements BEFORE interpreting If statements, the Hotkeys definitions (whether buried in an #Include or not) do not respect the If condition. Thanks for pointing me to AutoHotKey_L! Do you have a specific example of how to conditionally define a hotkey? The syntax is very confusing. Here's what I'm trying (after having installed AutoHotKey_L.exe in place of AutoHotKey.exe): RegRead, ComputerName, HKEY_LOCAL_MACHINE, System\CurrentControlSet\Control\ComputerName, ComputerName #If ( ComputerName = BDWELLE-DIM8300 ) LWin::LAlt but that doesn't seem to work...

  Read the article

• Google privacy concerns: trustworthy alternatives for migration?

  - by Markos Fragkakis

  I have come to realize the tremendous amount of information Google has on its users. I am a typical Google user, using Gmail, Google Reader. This means that right now Google now has the following information at its disposal: Who my friends are (Gmail) What we talk about (Gmail, Google Talk) What news sources I follow (Google Reader) How frequently I check them and which ones I consider important enough to share (Google Reader) A lot of other stuff What I search about and when (if I search when logged in) (Web search) I have no reason to believe that this information is used for reasons other than adjusting what ads I am displayed when I visit a site with Google Ads. However, I have realised that I am in no position to be certain that this is absolutely true, or that it always will be. On the other hand, I don't want to reach the uber-privacy-maniac state of maintaining my own email server and installing a desktop RSS reader in all my machines. So, I am asking for your opinions: What services constitute a good set of alternatives to the Google services, promising better privacy? Pros: Privacy Free Powerful Usable

  Read the article

• Best book for learning linux shell scripting?

  - by chakrit

  I normally works on Windows machines but on some occasions I do switch to development on linux. And my most recent project will be written entirely on a certain linix platforms (not the standard Apache/MySQL/PHP setup). So I thought it would pay to learn to write some linux automation script now. I can get around the system, start/stop services, compile/install stuffs fine. Those are probably basic drills for a programmer. But if, for example, I wanted to deploy a certain application automatically to a newly minted linux machine every month I'd love to know how to do it. So if I wanted to learn serious linux shell scripting, what book should I be reading? Thanks

  Read the article

• How can I make check_nrpe wait for my remote script to finish executing?

  - by Rauffle

  I have a python script that's being used as a plugin for NRPE. This script checks to see if a process if running on a virtual machine by doing an SSH one-liner with a "ps ax | grep process" attached. When executing the script manually, it works as expected and returns a single line of output for NRPE as well as a status based on whether or not the process is running. When I attempt to run the command setup to execute this script (from my Nagios server), I instantly get the output "NRPE: Unable to read output", however when I run the script manually it takes about a second before it returns output. Other commands run just fine, so it would seem like NRPE needs to wait a second or two for output rather than instantly failing, but I've been unable to find any way of accomplishing this; any tips? Thanks PS: The virtual machines are not accessible from anywhere other than the host machine, hence the need for the nrpe plugin to ssh from the host into the VM to check the process.

  Read the article

• Sysprep failling after reboot into OOBE

  - by askvictor

  I'm trying to configure an image for deployment to other machines. I've configured the machine, then I run sysprep, choose generalize and OOBE. Sysprep does its thing, then reboots. Then when 'setup is starting services', I get a 'Windows could not finish configuring the system', and it advises to reboot and try again, which presents the same error. I've tried uninstalling symantec endpoint antivirus, but this does not prevent the issue. Where should I look for what is causing the problem? Is there a logfile?

  Read the article

• lsyncd + csync2 : cluster of 3 or more nodes

  - by sbrattla

  I've got 3 (and potentially more) web servers hosting the same content (fronted by a load balancer). Thus, I need to make sure that files on these web servers are the same. It appears that csync2 in combination with lsyncd is able to do synchronize a cluster of nodes, but according to this article there's a problem with cyclic events in such a setup. In other words, the author writes that a file change on one machine would trigger a replication event to other machines, which again would trigger a replication event back to the original machine. It appears that this is a consequence of the setup which uses lsyncd (and inotify) to catch file modification events and from there trigger csync2 to replicate the file tree. Does anyone have experience with lsyncd in combination with csync2. Have you had trouble with cyclic events?

  Read the article

• Real VNC won't connect to OS X Leopard VNC server

  - by Pselus

  I have 3 machines. 2 Macs, 1 Dell. 1 of the Macs is running as a VNC server and the other Mac connects great with Chicken of the VNC. Sadly, this app does not exist for Windows so I'm using RealVNC to view from Windows. I connect the exact same way as with the Mac, but on Windows when it connects, I see a program pop up and then immediately close. I have tried all options available on RealVNC and nothing changes things. Anyone have any idea what I can do to fix this?

  Read the article

• What are industry standards and professional best practices in network hosts naming? [closed]

  - by Ivan

  Possible Duplicate: Naming convention for computers It seems an important and difficult dilemma for me how to name network hosts (routers, servers (while a server can be a router and host diverse services at the same time), virtual machines (while they host important services and can migrate), workstations and notebooks (using pc-username is not the best idea as users may change), printers & MFUs, surveillance IP cameras, etc). Are there known and accepted best practices for this task? Excuse me if there already was a similar question here (I think it probably was), I haven't found it.

  Read the article

• Check if root ca certificate is installed

  - by Zulakis

  We are having a custom CA for our local-domains. The Root CA certificate is installed on all the corporate machines by default, but sometimes it happens that we have someone here who doesn't have it installed. If the user a) accesses our intranet using http or b) accepts the server-certificate I would like to redirect the user to a site which tells it what happened and how they can install the root CA. The only solution I found was the following: <img src="https://the_site/the_image" onerror="redirectToCertPage()"> This is barely a work-around and not really a solution. It can be triggered by other problems then the missing certificate. Are there any better solutions on how to solve this problem?

  Read the article

• Missing NIC and USB devices

  - by MJ

  Coming into work today, I've found we have a fwe different computers (different companies/networks/OS versions - all windows based) that are all having the same issue. 1) Network NIC is not able to be viewed from network connections. If you refresh, its saying the service is not started. Services state the service is started and running. 2) USB devices are not recognized when plugged in, scan for hardware changes, etc. We have managed AV, that is kept up to date, and a managed patch policy that has all these machines at the most recent patch. I'm just wondering if anyone else has experienced these same symptoms, and what they have done to resolve them.

  Read the article

• NLB NIC w/ Static IP permanently "Acquiring Network Address" after adding more IP's to the cluster

  - by I.T. Support

  We have a 2 node NLB cluster. I recently added more IP's to the cluster range, after which point, the NLB NIC's on both of my nodes ended up in a permanent "acquiring network address" state. The cluster appears to be functioning despite this hang in acquiring an address. We've also rebooted the machines, and these NIC's remain in this state "acquiring network address" even after reboot, which I find troubling. Questions: Does anyone know where I can find documentation on how NLB binds to a NIC? (are there dll's involved, drivers, etc.) Does anyone know of any programs that have known incompatability issues with NLB? We have an application server installed on these NLB nodes (AOL Server) that interacts with the NIC's as well, and I suspect that it might be causing this issue. Before I go directly to Microsoft, I want to gather as much information as possible about the issue. Any help / guidance would be much appreciated...

  Read the article

• Repeated Reporting Services Login issue when deploying through BIDS to a remote server

  - by Richard Edwards

  We are having a problem deploying a reporting services report to a sql reporting services computer that is configured in SharePoint Integrated mode. I can successfully deploy to the SharePoint document libraries set up for reports and data connections if I do it locally from the box that SharePoint and Reporting Services are deployed on. If I try and do the same thing with the exact same deployment properties from a remote box, I constantly get a Reporting Services Login dialog popping up and no combination of domain\username and password will work. I've even tried the machines local admin account and still nothing. Any ideas where to start looking?

  Read the article

• Burn DVD mastered format DVD+R

  - by Zeus

  Using windows Vista, can I write DVD+R discs using mastered format? I've followed the instructions here But when I get to step 6, it gives an error "There was an error burning this disc. The disc might no longer be usable" There are no dollar signs in my files or extensions, and I have plenty of free space on my HD. I can successfully make a data disc using "live" format. Unfortunately my colleges home (XP) PC is unable to read it, despite the fact that it works on other XP machines at work... so I thought I'd try making a mastered one for greater compatibility. Any ideas?

  Read the article

• can I bundle multiple installs for Mac OSX and do them as a single script?

  - by Dov

  I have a lot of open source software to be installed for a course. We currently run on PCs that we provide. If we allow students to use their own Macs in Mac-centric schools, that means we have to load the software on those Macs. Rathern than have to load individual software, is there any way I can create a single file, mount it and run a script to install all packages? We are willing to simplify the installs by standardizing the locations to store the applications, since the students will have identical machines.

  Read the article

• IIS application pool failed to respond to ping

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I have been investigating a problem that occurred on a Windows 2003 server a few days ago. there are about 15 app pools, and within a few minutes, they all produced the error below in the system log: A process serving application pool 'Pool 31x' failed to respond to a ping. The process id was '7144'. The pools were then restarted automatically, but timed out during startup, leaving all sites down. My question is: what would cause a "ping timeout" to all of the app pools around the same time, and then why would they start up too slowly? The app in each pool is a WCMS which uses the .NET 1.1 framework. It connects to a remote DB but is otherwise independent of other machines.

  Read the article

• Deploy to JBoss 7 using Hudson Deploy plugin

  - by Uluk Biy

  I have 2 machines where one of them contains the Hudson CI and other JBoss 7 AS. In Hudson, I have installed "Deploy Plugin", created new job and filled required JBoss manager user connection fields. When I run the job, the project successfully built however the deployment process to remote JBoss AS is not being triggered. No errors or messages about the deployment in log. What should I do? EDIT The deployment is triggered (at least expected) as "Post-build Action" with parameters: [x] Deploy war/ear to a container WAR/EAR files : **/*.war Container : JBoss 7.x Manager user name : test Manager password : * * * * JBoss URL : http://192.168.1.2 JBoss JMX Management port : 9990 It is not a separate job.

  Read the article

• While running a batch file in Windows 7 with Admin rights from a thumb drive, how can I get the file path back to the thumb drive?

  - by Jeremy DeStefano

  I have a piece of software that is being distributed to several departments for installation onto Windows 7 laptops. They install software from the thumb drive and then they have to run a script to properly configure the software. Because the script is changing registry files and program files, it requires Admin rights. When running as Admin, it drops into the System32 folder and I no longer have an easy scriptable way to access files that need to be copied from the thumb drive, simply because I don't know for sure what drive letter its going to use on the various machines. Previous installations were on Windows XP and the command window file path stayed within the script folder. I've found similar questions here and I have already tried Relative Paths, but it can't seem to find the proper folder on the thumb drive or I can't seem to find the proper way to format it.

  Read the article

• Cacti dskIndex RHEL

  - by andyh_ky

  I'm attempting to use includeAllDisks in my snmpd.conf for RHEL 4 and RHEL 5 machines, but no data is being returned on the Cacti Data Query. snmpwalk isn't giving me any results. $ snmpwalk -v 2c -c public 172.19.4.140 .1.3.6.1.4.1.2021.9.1.1 UCD-SNMP-MIB::dskIndex = No Such Instance currently exists at this OID If I add disk / to snmpd.conf snmpwalk gives me the right results. $ snmpwalk -v 2c -c public 172.19.4.140 .1.3.6.1.4.1.2021.9.1.1 UCD-SNMP-MIB::dskIndex.1 = INTEGER: 1 I am wanting to deploy this to many systems using the same snmpd.conf (via Satellite). The disk configuration varies among systems and manually configuring snmpd.conf is not an optimal solution. Is there a way to get includeAllDisks to work? My snmpd.conf file: rocommunity public <cacti server IP> dontPrintUnits true includeAllDisks

  Read the article

• Mac OS X 10.6 issues connecting via vpn to Microsoft server

  - by chris hough

  I am currently running Mac OS X Snow Leopard and trying to use the native vpn client to connect to our Microsoft vpn server. If I route all traffic via the vpn connection I am able to connect to our servers, however, external traffic to i.e. google or stack overflow is blocked. If I uncheck the checkbox to route all traffic via the vpn I can connect to the vpn, however, I can not connect to my servers, external traffic to google or stackoverflow works though. Is this a vpn client issue, do I need to purchase Mac OS X vpn software instead of the native client, or is there a Microsoft vpn server setting that has to be checked. I am not familiar with the server software, but I wanted to post this question here to help out our network admin with the Mac OS X machines.

  Read the article

• One IP, One Port, Multiple Servers

  - by Adrian Godong

  I am looking for a solution to forward one public IP address and one specific port to different machines based on hostname (as of now, I need it only for HTTP). The current setup is NAT on a commodity router (it only provide simple public port to private IP address / port forwarding). I can add a Windows Server 2008 R2 machine before the router if required, but prefer not to do so. So ideally, I would like to have the current setup and the forwarding is done on one of the Windows Servers. Is it possible to do this?

  Read the article

• Virtual Disk Service Loader has stopped working

  - by Leigh Riffel

  We have several relatively recent (less than 1 week) installations of Windows Server 2008 R2 Enterprise that are getting this error whenever we open Disk Management. The application name is vdsldr.exe and the Problem Event Name is BEX64. The windows firewall was turned off and the service disabled. The Virtual Disk service was started (identical results when it is stopped). The computers are virtual machines running on VSphere, so that could be part of the problem. The strange thing is that Disk Manager worked fine when the VMs were first created.

  Read the article

• Networking Windows 7 and Vista

  - by foosion

  How do you set up a Windows Vista Home Basic desktop (wired) and a Windows 7 Home Premium laptop (wifi) on a home network so that they can share files and the printers connected to the desktop? The Win7 laptop may also be used on other networks. I'm going to have to set this up for my parents when I visit shortly. I currently use XP and am not really familiar with Vista or Win7 network setup. Would it be difficult to share between the Vista and Win7 machines and and XP machine? If not, how to add that?

  Read the article

• GAC locking problem when running deployment

  - by Kieran

  We have a NANT script that uses msbuild to compile our visual studio solutions and deploys the .dlls into the GAC. This works well on our integration/test servers as part of continuous integration, cruise control uses the NANT scripts and every time the dlls are put into the GAC without problem. On our local development machines, where we use subversion/vs.net etc. for development, frequently certain dlls do not make it to the GAC when we run the build. We think we have narrowed this down to visual studio and/or a plug in locking the GAC or the dlls for some reason. Strangely if we run the build a second time all the dlls make it to the GAC. We have added various iisreset's to the NANT script in the hope of releasing the lock but to no avail. Can anyone suggest a good approach to attack this problem? All the best

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >