Search Results

Search found 8103 results on 325 pages for 'matt trouble esse'.

Page 106/325 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

  • Samsung S23A750D 23" 120Hz get no signal

    - by John Carter
    I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

    Read the article

  • Burners freezing the PC when starting lead write in

    - by steve
    hi guys ,am having trouble with new pioneer dvdr-219l dual layer burners ,have replaced old burners with these dual layer ones . they are sata attached ,have tried img burn, xbox360 cookie burner, dvd decrypter, dvd flick , the burners seem ok burning cd and normal dvds but when trying to burn an iso to dual layer they will both freeze at the lead in write , the pc freezes including alt/delete mouse etc so have to re-boot,have tried uninstalling all burning programs that i have to eliminate conflicts and re-installing 1 at a time to see if that was the problem , still no solution am starting to think that maybe i have a bad sata cable the pc and burners dont seem to talk to each other when trying to burn dual layer ,any suggestions ???? this problem is giving me the shits ,ran microsofts fix it program and it said i had no burners installed that were capable of burning , i have had a look at device manager and the burners are there and when trouble shooted it says they are working ok , have noticed in device manager that the driver for these burners is from B.H.A.corporation file version 8.0.0.5. copyright 2000-2006 and they are not digitally sighned these burners are the latest models so how com the drivers are so old ...help please . steve

    Read the article

  • While using an ntfs smb share for mac users, do symbolic links and extended attributes work?

    - by scape
    We have a majority of mac users but we'd rather support their file sharing using a Windows server with an ntfs drive, or at least a Linux server with ext3. We've had trouble, much trouble, utilizing the OS X server software and after the years are now looking to abandon it. What's mostly holding us back is the fact that the mac users very often utilize symbolic links and other special features that exist for an HFS+ partition. The shared locations are mostly primary storage and not just used as an archive storage location. While there is an option to create symbolic links under ntfs, I'm curious if there is anything I need to look out for if I were to move the files over to a new partition that's hosted from a Windows server from the HFS+ partition; in addition, how well creating a symbolic link from a mac might work. I am also worried about windows backup software and if it will ruin these special sym links, and how placing permissions on sub-folders will work. Alternatively I could remotely backup the files using a mac and Bru, nonetheless I still want to get away from mac server for hosting the shares.

    Read the article

  • Installing sphinx on a web hosting server

    - by fiftyeight
    I want to install sphinx search on a web-hosting server. I'm on a Linux VPS with hostgator, but I never actually installed anything on a remote server so this will be a first time for me. If there's anyone here who installed sphinx it's really help me I had some problems when using sphinx on my PC with the permissions and the MySQL files, eventually I got it working on my PC. Anyway, I'd me really grateful if anyone can help me with some questions Do i need root access to install sphinx? I have root access to the server but I'd connect to it as a normal user since doing stuff as root is always less secure. can anyone tell me by what user I need to execute the indexer and the search daemon? Should I use root access in order to this? when I did it as a normal user on my PC it gave me some trouble with the PID file and the log files. last time I executed the search deamon I executed it as a normal user and it gave me some trouble, I created the folder /var/log/ for log files and did chmod 777 on it, but still when I executed the search daemon it created the PID file "searchd.pid" file but with no permissions for some reason, any idea why? Thanx in advance. fiftyeight

    Read the article

  • How to find the next generated value for a auto-increment column?

    - by Tim Büthe
    I face some trouble with IBM DB2's auto-increment columns. At first, all my columns were defined as GENERATED ALWAYS, but since I had trouble with this when using the "db2 import ..." command, I changed them to GENERATED BY DEFAULT. This is necessary, sinceI need the IDs to be consistent, because other tables reference them. So using "db2 import ... modified by identityignore ..." isn't an option. When I now import data, the IDs are inserted correctly, but everytime I do this, I have to remember to set a new start for the auto-increment column by getting the highest Id+1 and alter the column like this: SELECT MAX(mycolumn)+ 1 FROM mytable; ALTER TABLE mytable ALTER COLUMN mycolumn RESTART WITH <above_result>; If I forget this, an Insert-Statement will fail with an duplicate PK error, since the auto-increment column is the primary key. So my question is: Is there a way to find the next value for an auto-increment column, so I could write Statements that would check, if this value is less then the SELECT MAX and needs to be set? Or: Isn't this whole thing as complicated as it seems to me? Could I somehow import data, preserving the IDs and have the auto-increment column still working as expected?

    Read the article

  • Issues with returned mail sent to web-based email domains

    - by Beeder
    My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

    Read the article

  • Agile Testing Days 2012 – Day 3 – Agile or agile?

    - by Chris George
    Another early start for my last Lean Coffee of the conference, and again it was not wasted. We had some really interesting discussions around how to determine what test automation is useful, if agile is not faster, why do it? and a rather existential discussion on whether unicorns exist! First keynote of the day was entitled “Fast Feedback Teams” by Ola Ellnestam. Again this relates nicely to the releasing faster talk on day 2, and something that we are looking at and some teams are actively trying. Introducing the notion of feedback, Ola describes a game he wrote for his eldest child. It was a simple game where every time he clicked a button, it displayed “You’ve Won!”. He then changed it to be a Win-Lose-Win-Lose pattern and watched the feedback from his son who then twigged the pattern and got his younger brother to play, alternating turns… genius! (must do that with my children). The idea behind this was that you need that feedback loop to learn and progress. If you are not getting the feedback you need to close that loop. An interesting point Ola made was to solve problems BEFORE writing software. It may be that you don’t have to write anything at all, perhaps it’s a communication/training issue? Perhaps the problem can be solved another way. Writing software, although it’s the business we are in, is expensive, and this should be taken into account. He again mentions frequent releases, and how they should be made as soon as stuff is ready to be released, don’t leave stuff on the shelf cause it’s not earning you anything, money or data. I totally agree with this and it’s something that we will be aiming for moving forwards. “Exceptions, Assumptions and Ambiguity: Finding the truth behind the story” by David Evans started off very promising by making references to ‘Grim up North’ referring to the north of England. Not sure it was appreciated by most of the audience, but it made me laugh! David explained how there are always risks associated with exceptions, giving the example of a one-way road near where he lives, with an exception sign giving rights to coaches to go the wrong way. Therefore you could merrily swing around the corner of the one way road straight into a coach! David showed the danger in making assumptions with lyrical quotes from Lola by The Kinks “I’m glad I’m a man, and so is Lola” and with a picture of a toilet flush that needed instructions to operate the full and half flush. With this particular flush, you pulled the handle all the way down to half flush, and half way down to full flush! hmmm, a bit of a crappy user experience methinks! Then through a clever use of a passage from the Jabberwocky, David then went onto show how mis-translation/ambiguity is the can completely distort the original meaning of something, and this is a real enemy of software development. This was all helping to demonstrate that the term Story is often heavily overloaded in the Agile world, and should really be stripped back to what it is really for, stating a business problem, and offering a technical solution. Therefore a story could be worded as “In order to {make some improvement}, we will { do something}”. The first ‘in order to’ statement is stakeholder neutral, and states the problem through requesting an improvement to the software/process etc. The second part of the story is the verb, the doing bit. So to achieve the ‘improvement’ which is not currently true, we will do something to make this true in the future. My PM is very interested in this, and he’s observed some of the problems of overloading stories so I’m hoping between us we can use some of David’s suggestions to help clarify our stories better. The second keynote of the day (and our last) proved to be the most entertaining and exhausting of the conference for me. “The ongoing evolution of testing in agile development” by Scott Barber. I’ve never had the pleasure of seeing Scott before… OMG I would love to have even half of the energy he has! What struck me during this presentation was Scott’s explanation of how testing has become the role/job that it is (largely) today, and how this has led to the need for ‘methodologies’ to make dev and test work! The argument that we should be trying to converge the roles again is a very valid one, and one that a couple of the teams at work are actively doing with great results. Making developers as responsible for quality as testers is something that has been lost over the years, but something that we are now striving to achieve. The idea that we (testers) should be testing experts/specialists, not testing ‘union members’, supports this idea so the entire team works on all aspects of a feature/product, with the ‘specialists’ taking the lead and advising/coaching the others. This leads to better propagation of information around the team, a greater holistic understanding of the project and it allows the team to continue functioning if some of it’s members are off sick, for example. Feeling somewhat drained from Scott’s keynote (but at the same time excited that alot of the points he raised supported actions we are taking at work), I headed into my last presentation for Agile Testing Days 2012 before having to make my way to Tegel to catch the flight home. “Thinking and working agile in an unbending world” with Pete Walen was a talk I was not going to miss! Having spoken to Pete several times during the past few days, I was looking forward to hearing what he was going to say, and I was not disappointed. Pete started off by trying to separate the definitions of ‘Agile’ as in the methodology, and ‘agile’ as in the adjective by pronouncing them the ‘english’ and ‘american’ ways. So Agile pronounced (Ajyle) and agile pronounced (ajul). There was much confusion around what the hell he was talking about, although I thought it was quite clear. Agile – Software development methodology agile – Marked by ready ability to move with quick easy grace; Having a quick resourceful and adaptable character. Anyway, that aside (although it provided a few laughs during the presentation), the point was that many teams that claim to be ‘Agile’ but are not, in fact, ‘agile’ by nature. Implementing ‘Agile’ methodologies that are so prescriptive actually goes against the very nature of Agile development where a team should anticipate, adapt and explore. Pete made a valid point that very few companies intentionally put up roadblocks to impede work, so if work is being blocked/delayed, why? This is where being agile as a team pays off because the team can inspect what’s going on, explore options and adapt their processes. It is through experimentation (and that means trying and failing as well as trying and succeeding) that a team will improve and grow leading to focussing on what really needs to be done to achieve X. So, that was it, the last talk of our conference. I was gutted that we had to miss the closing keynote from Matt Heusser, as Matt was another person I had spoken too a few times during the conference, but the flight would not wait, and just as well we left when we did because the traffic was a nightmare! My Takeaway Triple from Day 3: Release often and release small – don’t leave stuff on the shelf Keep the meaning of the word ‘agile’ in mind when working in ‘Agile Look at testing as more of a skill than a role  

    Read the article

  • Monitora&ccedil;&atilde;o com Oracle Enteprrise Manager

    - by fernando.galdino
    A figura abaixo oferece uma visão geral das possibilidades de monitoramento providas pelo Oracle Enterprise Manager (OEM), que é uma ferramenta que permite gerenciar a infraestrutura de TI da empresa. Um componente importante da solução é chanado OEM Grid Control. Esse componente permite gerenciar, visualizar e monitorar diversos elementos a partir de uma mesma console. E que elementos podem ser monitorados? No conceito utilizado pelo OEM, os elementos que podem ser monitorados são chamados de Targets, e esses targets envolvem a monitoração de hosts (Windows, Linux, Solaris), Banco de Dados, Middleware, Aplicações Web, Serviços que podem ser customizados pelo administrador, Sistemas e Grupos de targets, além dos aplicativos Oracle. Cada elemento monitorado é ativado através de packs de gerenciamento. Ou seja, há uma série de packs que podem ser adquiridas conforme a necessidade, para permitir a monitoração a partir do próprio OEM Grid Control. Existem packs de monitoramento especiais para banco de dados Oracle, packs de monitoramento para Tomcat, Jboss, WebLogic, SOA Suite, Identity Management. A lista é bem extensa e darei mais detalhes em um novo post. Mas caso queira visitar, veja: http://download.oracle.com/docs/cd/B16240_01/doc/nav/overview.htm Além das packs de monitoramento, existem também plugins e conectores. Os plugins permitem o gerenciamento de elementos adicionais, tais como dispositivos de rede, servidores, banco de dados de terceiros (DB2, SQL Server), Vmware, etc. Já os conectores permitem a integração com outros softwares, tais como gerenciadores de requisições de helpdesk, de modo a integrar os alertas gerados pela ferramenta e gerar tickets em ferramentas como CA Service Desk, BMC Remedy e outros. A extensão de funcionalidades é realmente bem vasta. Num próximo post irei comentar sobre o Ops Center, um novo componente que surgiu após a aquisição da Sun. Além do Grid Control e do Ops Center, há outros componentes bem interessantes. A figura abaixo ilustra diversas camadas onde o ferramental Oracle pode ser usado para monitoração. Há uma pack que permite gerenciar os níveis de serviços em todas as camadas ilustradas. Dada uma requisição, pode-se decompor os dados de SLA em cada camada. E há também o Real User Monitoring, que trata de medir a experiência com o usuário. Falarei disso num novo post, mas basicamente a ferramenta permite acompanhar todo o tráfego de rede gerado dos usuários finais até os servidores web, e com isso rastrear como cada usuário usa a aplicação, quanto tempo ele navega pelo site, se ele enfrentou algum tipo de problema, se houve algum pedido não finalizado devido a algum problema na infraestrutura. É uma ferramenta bem interessante, falarei um pouco mais dela depois. E claro, há também componentes para a realização de testes funcionais e de carga. Em breve, aqui no blog :)

    Read the article

  • How bad is it to use display: none in CSS?

    - by Andy
    I've heard many times that it's bad to use display: none for SEO reasons, as it could be an attempt to push in irrelevant popular keywords. A few questions: Is that still received wisdom? Does it make a difference if you're only hiding a single word, or perhaps a single character? If you should avoid any use of it, what are the preferred techniques for hiding (in situations where you need it to become visible again on certain conditions)? Some references I've found so far: Matt Cutts from 2005 in a comment If you're straight-out using CSS to hide text, don't be surprised if that is called spam. I'm not saying that mouseovers or DHTML text or have-a-logo-but-also-have-text is spam; I answered that last one at a conference when I said "imagine how it would look to a visitor, a competitor, or someone checking out a spam report. If you show your company's name and it's Expo Markers instead of an Expo Markers logo, you should be fine. If the text you decide to show is 'Expo Markers cheap online discount buy online Expo Markers sale ...' then I would be more cautious, because that can look bad." And in another comment on the same article We can flag text that appears to be hidden using CSS at Google. To date we have not algorithmically removed sites for doing that. We try hard to avoid throwing babies out with bathwater. (My emphasis) Eric Enge said in 2008 The legitimate use of this technique is so prevalent that I would rarely expect search engines to penalize a site for using the display: none attribute. It’s just very difficult to implement an algorithm that could truly ferret out whether the particular use of display: none is meant to deceive the search engines or not. Thanks in advance, Andy

    Read the article

  • Geeks with Blogs acquired by Watson Technology Group

    - by Tarun Arora
    Just received the following email… It’s now official! Hello bloggers, you are receiving this email to let you know that Geeks with Blogs (http://geekswithblogs.net) has been acquired by my company, Watson Technology Group. Jeff Julian started the site in 2003 and since then him and John Alexander (AJI Software) have done a great job with the community. I am a long time friend of theirs and I was actually one of the first bloggers on the site in 2003. I am excited to take over the reins and I have a lot of plans to improve the blog platform and community. My goal is to make the site the #1 blogging site for all IT professionals. The site currently has over 3,000 bloggers and has received 75,000,000 website visitors over the last 5 years. Some of the planned improvements in the coming months: Overall look and feel upgrades to the site Improve editor for blog postings including support for code formatting and uploading images Mobile support and more responsive design templates Improve community side of the site to drive more traffic between blogs Highlight top articles and bloggers by redesigning the home page ... and lots of other things. One of the delicate balances I want to ensure is that each blogger can maintain their own identity and blog personality but at the same time be part of the community of bloggers. The community helps everyone receive more blog traffic and visibility. The blog templates need to be somewhere between Facebook and Myspace if you know what I mean. Since this website is designed to be a community, I would love to have your feedback and hear your ideas. Please submit idea via UserVoice at http://geekswithblogs.uservoice.com or email [email protected] at anytime. For those who are interested to know more about me, here is a link to my LinkedIn profile and you can follow me on Twitter @mattwatson81. LinkedIn: http://www.linkedin.com/in/mattwatsonkc Thanks, Matt Watson Geeks with Blogs Member of Geeks with Blogs Unsubscribe [email protected] from this list. Our mailing address is: GeeksWithBlogs,LLC 9201 Ward Parkway Suite 302 Kansas City, MO 64114

    Read the article

  • Pie Charts Just Don't Work When Comparing Data - Number 10 of Top 10 Reasons to Never Ever Use a Pie

    - by Tony Wolfram
    When comparing data, which is what a pie chart is for, people have a hard time judging the angles and areas of the multiple pie slices in order to calculate how much bigger one slice is than the others. Pie Charts Don't Work A slice of pie is good for serving up a portion of desert. It's not good for making a judgement about how big the slice is, what percentage of 100 it is, or how it compares to other slices. People have trouble comparing angles and areas to each other. Controlled studies show that people will overestimate the percentage that a pie slice area represents. This is because we have trouble calculating the area based on the space between the two angles that define the slice. This picture shows how a pie chart is useless in determing the largest value when you have to compare pie slices.   You can't compare angles and slice areas to each other. Human perception and cognition is poor when viewing angles and areas and trying to make a mental comparison. Pie charts overload the working memory, forcing the person to make complicated calculations, and at the same time make a decision based on those comparisons. What's the point of showing a pie chart when you want to compare data, except to say, "well, the slices are almost the same, but I'm not really sure which one is bigger, or by how much, or what order they are from largest to smallest. But the colors sure are pretty. Plus, I like round things. Oh,was I suppose to make some important business decision? Sorry." Bad Choices and Bad Decisions Interaction Designers, Graphic Artists, Report Builders, Software Developers, and Executives have all made the decision to use pie charts in their reports, software applications, and dashboards. It was a bad decision. It was a poor choice. There are always better options and choices, yet the designer still made the decision to use a pie chart. I'll expore why people make such poor choices in my upcoming blog entires. (Hint: It has more to do with emotions than with analytical thinking.) I've outlined my opinions and arguments about the evils of using pie charts in "Countdown of Top 10 Reasons to Never Ever Use a Pie Chart." Each of my next 10 blog entries will support these arguments with illustrations, examples, and references to studies. But my goal is not to continuously and endlessly rage against the evils of using pie charts. This blog is not about pie charts. This blog is about understanding why designers choose to use a pie chart. Why, when give better alternatives, and acknowledging the shortcomings of pie charts, do designers over and over again still freely choose to place a pie chart in a report? As an extra treat and parting shot, check out the nice pie chart that Wikipedia uses to illustrate the United States population by state.   Remember, somebody chose to use this pie chart, with all its glorious colors, and post it on Wikipedia for all the world to see. My next blog will give you a better alternative for displaying comparable data - the sorted bar chart.

    Read the article

  • Pagination, Duplicate Content, and SEO

    - by Iamtotallylost
    Please consider a list of items (forum comments, articles, shoes, doesn't matter) which are spread over multiple pages. Different sort orders are supported (by date, by popularity, by price, etc). So, an URL might look like this (I use the query style here to simplify things): /items?id=1234&page=42&sort=popularity /items?id=1234&page=5&sort=date Now, in terms of SEO, I think I should be worried about duplicate content. After all, each item appears at least as many times as there are sort orders. I've seen Matt Cutts talking about the rel=canonical link tag, but he also said that the canonical page should have very similar content. But this is not the case here because page #1 in a non-canonical sort order might have completely different items than page #1 in the canonical sort order. For a given non-canonical page, there is no clear canonical page listing all the same items, so I think rel=canonical won't help here. Then I thought about using the noindex meta tag on all pages with non-canonical sort order, and not using it on all pages with canonical sort order. However, if I use that method, what will happen with backlinks that are going to non-canonical pages -- will they still spread their page rank juice, even though the first page googlebot (or any other crawler) is going to encounter is marked as "noindex"? Can you please comment on my problem and what you think is the best solution? If you think you have a better solution, please consider that 1) I do not want to use Javascript for this, 2) I do not want all the items to be on one page. Thank you.

    Read the article

  • SyncToBlog #10 Lots of Azure and Cloud Links including MIX10 videos

    - by Eric Nelson
    Just getting a few interesting cloud links “down on paper”. I last did one of these on Azure in Feb 20010. Cloud Links: Article on Debugging in the Cloud http://code.msdn.microsoft.com/azurescale  A sample app that demonstrates monitoring and automatically scaling an Azure application in response to dropping performance etc. Basically a console app that checks perf stats and then uses the Service Management API to spin up new instances when needed. Azure In Action book is imminent :) Running Memcached in Windows Azure from the MS UK team Using Microsoft Codename Dallas as a data source for Drupal also from the MS UK team I often mention them – but this post is the biz! Metodi on fault and upgrade domains Detailed blog post on comparing Azure AppFabric Service Bus REST support to the free Faye Ruby+JavaScript gem that implements the JSON publish/subscribe protocol Bayeux. AppFabric LABS allow you to test out and play with experimental AppFabric technologies. Details of the upcoming VM support in Windows Azure Nice series of posts from J D Meier in the Patterns and Practice team How To Use ASP.NET Forms Auth with Azure Tables  How To Use ASP.NET Forms Auth with Roles in Azure Tables How To Use ASP.NET Forms Auth with SQL Server on Windows Azure And sessions from MIX10 held March 15th to 17th: Lap around the Windows Azure Platform – Steve Marx Building and Deploying Windows Azure Based Applications with Microsoft Visual Studio 2010 – Jim Nakashima Building PHP Applications using the Windows Azure Platform – Craig Kitterman, Sumit Chawla Using Ruby on Rails to Build Windows Azure Applications – Sriram Krishnan Microsoft Project Code Name “Dallas": Data for your apps – Moe Khosravy Using Storage in the Windows Azure Platform – Chris Auld Building Web Applications with Windows Azure Storage – Brad Calder Building Web Application with Microsoft SQL Azure – David Robinson Connecting Your Applications in the Cloud with Windows Azure AppFabric – Clemens Vasters Microsoft Silverlight and Windows Azure: A Match Made for the Web – Matt Kerner Something for everyone :)

    Read the article

  • MediaTemple tcpsndbuf QoS Alerts

    - by theturninggate
    I'm hosting with MediaTemple on a (dv) Dedicated-Virtual 3.5 server. My site consists of a Wordpress blog, some custom PHP pages (nothing too intense), and I server 500-700 unique visitors per day. Despite my pretty modest numbers, I suffer from regular Apache crashes on account of QoS Alerts, mostly flagged as "tcpsndbuf". MediaTemple support -- usually tops -- has been pretty useless on this matter. I'm looking for answers as to how/why this is happening, advice on how to stop it. My website is a good portion of my livelihood, and downtime equates to lost income. Any and all help much appreciated. -Matt

    Read the article

  • Can it be harmful to grant jackd realtime priority?

    - by SuperElectric
    I am apt-get installing Ardour, a sound mixing program, just to try it out. Installing Ardour also installs JACK, a dependency. As part of the JACK installation script, I get the following dialog: If you want to run jackd with realtime priorities, the user starting jackd needs realtime permissions. Accept this option to create the file /etc/security/limits.d/audio.conf, granting realtime priority and memlock privileges to the audio group. Running jackd with realtime priority minimizes latency, but may lead to complete system lock-ups by requesting all the available physical system memory, which is unacceptable in multi-user environments. Enable realtime process priority? I'm installing on my laptop, which never has multiple simultaneous users. I still have concerns: is JACK something that'll be used by the system itself to play any sound (i.e. will it replace ALSA)? If so, does that mean that if I enable realtime priority for JACK, I'll run a slight risk of freezing the machine whenever any sound is played? Or is JACK only going to be used by Ardour for now (until I install some other JACK-dependent program)? Thanks, -- Matt

    Read the article

  • Universal navigation menu across domains

    - by Jon Harley
    I'd like to start by saying that I've searched for hours and could not find a definitive answer to my question. Across different sites on different second-level domains exists a universal navigation bar with a collection of roughly 30 links. This universal bar is exactly the same for every page on each domain. The bar's HTML, CSS and JavaScript are all stored in a subfolder for each domain and the HTML is embedded upon serving the page and is not being injected on the client side. None of the links use any rel directives and are as vanilla as can be. My question is about Google's duplicate content rule. Would something like this be considered duplicate content? Matt Cutt's blog post about duplicate content mentions boilerplate repetition, but then he mentions lengthy legalese. Since the text in this universal bar is brief and uses common terms, I wonder if this same rule applies. If this is considered duplicate content, what would be a good way to correct the problem? Thank you for your help.

    Read the article

  • SharePoint MVP Chat &ndash; tomorrow and day after

    - by Sahil Malik
    Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Yes we’re doing it again! After two very successful chats, a number of MVPs will be online in chat style answering your SharePoint questions. Here’s the schedule Tuesday May 25th at 4PM PDT (join here) Agnes Molnar Bill English Brian Farnhill Bryan Phillips Clayton Cobb David Mann <—ask him to tell a joke, he has a great sense of humor! Also bug him about Workflows. Matt McDermott Paul Stork Rob Bogue <—Ask him about WFs too. Rob Foster <— Him and Nick Swan run a SharePoint podcast. Sahil Malik <—I know him Saifullah Shafiq Ahmed   Wednesday at 9AM PDT (join here) Andrew Connell <— youngest MVP ever! LOL. Becky Bertram Bil Simser Chadima Kulathilake Claudio Brotto Gary Lapointe <—the stsadm extensions guy, ask him about powershell Darrin Bishop John Ross Michael Mukalian Muhanad Omar Randy Drisgill <—he created SP2010 starter master pages. Ask him about branding Shane Young Todd Bleeker Zlatan Dzinic Comment on the article ....

    Read the article

  • Powershell (sqlps) lastbackupdate not changing despite having run a sqlserver backup

    - by user1666376
    I'm using Powershell to check last backup times across all our sqlserver databases. This seems to work really well, but I've got a question If I run this (a cut-down version of the actual script): dir SQLSERVER:\SQL\Server1\default\databases | select parent, name, lastbackupdate I get: Parent Name LastBackupDate ------ ---- -------------- [Server1] ADBA 10/09/2012 21:15:37 [Server1] ReportServer 10/09/2012 21:00:17 [Server1] ReportServerTempDB 10/09/2012 21:00:18 [Server1] db1 10/09/2012 21:15:35 If I then run a sql backup of the Server1 default instance, and run the same query the last backup date doesn't change: PS C:\temp> dir SQLSERVER:\SQL\Server1\default\databases | select parent, name, lastbackupdate Parent Name LastBackupDate ------ ---- -------------- [Server1] ADBA 10/09/2012 21:15:37 [Server1] ReportServer 10/09/2012 21:00:17 [Server1] ReportServerTempDB 10/09/2012 21:00:18 [Server1] db1 10/09/2012 21:15:35 ..but if I open a new powershell window, it shows the backup I just took: PS SQLSERVER:\> dir SQLSERVER:\SQL\Server1\default\databases | select parent, name, lastbackupdate Parent Name LastBackupDate ------ ---- -------------- [server1] ADBA 12/09/2012 09:03:23 [server1] ReportServer 12/09/2012 08:48:03 [server1] ReportServerTempDB 12/09/2012 08:48:04 [server1] db1 12/09/2012 09:03:21 My guess is that this is expected behaviour, but could anybody show me where it's documented/explained - I just want to understand what's going on. This is running the SQlps which came with 2008, against a 2008 instance. Thanks Matt

    Read the article

  • Why are two indicator-network versions being worked on?

    - by Daniel Rodrigues
    Some months ago, on the road to Ubuntu Maverick, a new system indicator, network (with connman as a backend), started to be developed. The plan was to get it into UNE and release it with no notifcation area. Unfortunately it didn't make it into the final version. However, continued efforts are still being made to improve it, and I'm getting regular updates. From a blueprint from the last UDS, I read that the plan was to ship no notification area and only indicators. For that, it was defined that nm-applet (backend: NetworkManager) should be ported to the appindicator library. Today I discovered that those efforts are going on and a initial version is available for testing, available from Matt Trudel PPA (Natty only). So, my questions is, to whoever has the necessary info: wouldn't it be easier to join efforts and concentrate the work in just one version (probably NetworkManager backend, as that's the official plan), instead of breaking those efforts apart and hampering both testing and developing? Both indicators are being developed by Canonical engineers, and that really doesn't make much sense. So, any Canonical engineer willing to clarify this?

    Read the article

  • Run one virtual machine on a Linux server + standard Linux functions

    - by fistameeny
    Hi, I am looking for a method to setup a Linux server (running Ubuntu Server) that uses Samba for file sharing, as well as hosting a Windows virtual machine (in this case, Windows Small Business Server 2003, which in turn hosts SQL Server Express - Exchange won't be used on this). I would like to have the Linux server serving the files over Samba, and hosting the Virtual Machine. This obviously rules ESXi out as it couldn't do Samba at the same time. What would be the next best solution to give reasonable speed? Vmware Server 2.0, VirtualBox, Xen? There will be 10-15 users accessing the Samba shares and the SQL Express virtual machine. Matt

    Read the article

  • Bose USB audio: crackling popping sound, eventually die

    - by Richard Barrett
    I've been trying to troubleshoot this issue for a while now. Any help would be much appreciated. I'm having trouble getting my Bose "Companion 5 multimedia speakers" working with my installation of Ubuntu 12.04 (link to Bose product here: http://www.bose.com/controller?url=/shop_online/digital_music_systems/computer_speakers/companion_5/index.jsp ). The issue seems to be low level (not just Ubuntu). What happens: When I boot into Ubuntu, I can get Rhythm box to play ok. However, if I try anything else (an .avi file, a webpage, or Clementine player with mp3 files) I get crackling, popping, or choppy sounds. If I move the mouse around, especially if it seems graphic intensive, the problem gets worse (more crackling noises). The more taxing it appears to be, the more likely it is that the sound will just die altogether until I reboot. For some reason the videos at www.bloomberg.com seem especially bad for it (my sound normally goes dead in under 45 seconds and won't work until reboot). Both my desktop running Ubuntu 12.04 and my laptop (running the same) have the same crackling problem. Troubleshooting so far: A friend of mine who knows linux well tried to solve it for me without any luck. He took pulseaudio out of the equation, but still had the problem just using AlSA. Among the many things he tried was adjusting the latency, but that didn't help either. I've also tried things like adjusting the USB device settings in the config file from -2 to -1 so that it will use my USB sound and I also commented out the lines that would stop that. These don't do anything. (That really seems like it's for someone who is getting no sound at all, so it's not surprising this won't work.) My friend's laptop running his Archlinux could play my Bose USB speakers without any problems. I also tried setting my daemon.conf file to use 6 channels (based on this http://lotphelp.com/lotp/configure-ubuntu-51-surround-sound ) but that didn't work either. I recently used a DVD to boot into Ubuntu Studio 12.04 (because it uses a live audio kernel) and this happened: I got perfect sound for a minute or two When I started moving windows around while sound was playing, the sound died again. Perhaps more interesting: There is a headphone out jack on the Bose system. When I use it, the audio is perfect for all applications (even the deadly bloomberg.com videos with .avi playing at the same time and moving around windows). Also, there is an audio-in jack on the Bose system. I can use a male-to-male mini jack to go from my soundcard's output to the Bose input and then all sound works perfectly. -However, it still requires the Bose to be plugged in to USB, otherwise I lose all sound. Any thoughts? Any suggestions for trouble shooting? (Or any suggestions for somewhere else to post to solve this?) Any logs or other files I can provide to help someone help me work this out? Your help is much appreciated! Rick BTW: I sometimes get people posting responses like "My Bose USB system works great with Ubuntu 12.04," without any more details. Is there anything I should ask such people to narrow down my problem? (It's kind of annoying to hear such a response because it doesn't help solve my problem.)

    Read the article

  • Realtek RTL8111/8168B wired network doesn't work anymore

    - by Radar4002
    This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

    Read the article

  • Policy Administration is the Top 2011 IT Priority for Insurers

    - by helen.pitts(at)oracle.com
    The current issue of Insurance Networking News includes an interesting column by Novarica's Matt Josefowicz.  Recent research by the firm revealed that policy administration replacement or extension is the most common strategic IT project for insurers this year.  The article goes on to note that insurers are keenly focused on the business capabilities that can be delivered once the system is in production as well as the ability to leverage agile development methodologies and true business/IT collaboration during implementation. The results are not too surprising given that policy administration is a mission-critical system for life and annuity insurers.  As Josefowicz notes, "Core systems are called core for a reason--they are at the heart of the insurer's ability to function.  Replacing them is not to be done lightly, but failing to replace them can mean diminishing the ability to compete or function effectively as a company." Insurers can no longer rely on inflexible policy administration systems that impede their ability to rapidly configure and bring to innovative new products, add riders, support changing business processes and take advantage of market opportunities.  The ability to leverage the policy administration systems to better service customers and distribution channels by providing real-time access to policy information throughout the policy lifecycle is also critical to sustain loyalty and further fuel growth.Insurers can benefit from a modern, adaptive policy administration system, like Oracle Insurance Policy Administration for Life and Annuity.  You can learn more about the industry's most highly advanced, rules-based system, which is unmatched for its highly flexible, rules-based configurability, performance and extensibility, as well as global market industry trends by viewing a complimentary, on-demand Webcast, Adapt, Transform and Grow:  Accelerate Speed to Market with Adaptive Insurance Policy Administration.Data conversions can be a daunting process for many insurers when deciding to modernize, in particular when consolidating from multiple, disparate legacy policy administration systems to a single new platform.  Migrating from a legacy system requires a well-thought out approach that builds on the industry's best thinking from previous modernization efforts and takes data migration off the critical path by leveraging proven methodology and tools to capitalize on the new system's capabilities.  We'll discuss more about this approach in a future Oracle Insurance blog.Helen Pitts is senior product marketing manager for Oracle Insurance's life and annuities solutions.

    Read the article

  • Wireless Network Found, can't connect, repeated requests for authentication

    - by Herm Holland
    After trawling through the internet, on forums, support websites, and through dozens upon dozens of answered questions on this site, I've not found a solution to what seems like a fairly regular problem... I cannot connect to a wireless network, and am continually asked for the network password. I have tried countless suggested solutions on the different locations I've already referred to. None of them have worked. Details of my experience are as follows: I have just recently installed Ubuntu 12.04.1 (32-bit). Ubuntu installed on my system seemingly fine, and I even formatted my hard drive during the process. It's as if it were a new desktop computer. During the installation I was asked to connect to a Wireless Network. I have a USB Wireless Card connected which I have used to connect desktop PC's, laptops, and a Wii to the internet from approximately the same area of the house (thus the same distance from the Wireless Router). I chose my network, entered the correct password for it (I double checked; it's definitely the right password) and proceeded with the installation. Several times before the installation was complete, I was asked to authenticate the connection, and this seemed to do nothing each time. On the repeated screens the password was already entered in the appropriate box. When Ubuntu booted up the first thing I was faced with (other than something about Language settings, or something) was another request for authentication. Again, the password was already there, so I clicked connect. It did not connect. Instead, I was once again faced with repeated requests every few minutes. I went onto my laptop, which is connected to this network, checked the details of the network, and entered them manually into my Ubuntu PC (including the IPv4 and IPv6 information) but this didn't work either, so I set it back to finding the settings automatically. Note, also, that the "Connect automatically" and "Available to all users" boxes are checked, and have been unchecked & rechecked countless times. I have also tried having my User account connect automatically, and to need a password entered at the welcome screen. Whilst I've been writing this, it has gone through a spat of connecting successfully to the network for less than a minute, before coming offline again, only to repeat the process. But it has now returned to prompting me for a password every couple of minutes. This computer has already run on the Fedora OS, and had no trouble connecting to, and maintaining a connection. I also have a laptop running Windows 7 less than a metre away from this desktop PC, which is connected and has no trouble maintaining a connection at 50%-100% strength (fluctuating). Therefore: - I know it's not the wireless card - I know it's not the PC itself - I know it's not the access point - I know it's not the location of my PC or wireless card - It is solely because of Ubuntu Everything else has worked fine, but the moment Ubuntu was introduced into the equation, it has gone completely wrong. Honestly; I prefer Ubuntu as an OS to Fedora, but if I can't solve the problem it'll be straight back to Fedora that I'll have to go. Can anyone help me at all?

    Read the article

  • How&rsquo;s your Momma an&rsquo; them?

    - by Bill Jones Jr.
    When a Southern “boy” like me sees somebody that used to be, or should be, a close friend or relative that they haven’t seen in a long time, that’s a typical greeting.  Come to think of it, we were often related to close friends. So “back in the day”, we not only knew people but everybody close to them.  When I started driving, my Dad told me to always drive carefully in Polk county.  He said if I ran into anybody there, it was likely they would be related or close family friends. Not so much any more… the cities have gotten bigger and more people come south and stay.  One of the curses of air conditioning I guess. Anyway, it’s been a while.  So “How’s your Momma and them”?  Have you been waiting for me to blog again?  Too bad, I’m back anyway <smile>. Here in Charlotte we just had another great code camp.  The Enterprise Developers Guild is going strong, thanks to the help of a lot of dedicated people.  Mark Wilson, Brian Gough, Syl Walker, Ghayth Hilal, Alberto Botero, Dan Thyer, Jean Doiron, Matt Duffield all come to mind.  Plus all the regulars who volunteer for every special event we have. Brian Gough put on a successful SharePoint Saturday.  Rafael Salas and our friends at the local Pass SQL group had a great SQL Saturday.  Brian Hitney and Glen Gordon keep on doing their usual great job for developers in the southeast as our local Microsoft reps. Since my last post, I have the honor of being designated the INetA Membership Mentor for Georgia in addition to mentoring the groups in the Carolinas for the past several years.  Georgia could be a really good thing since my wife likes shopping in Atlanta, not to mention how much we both like Georgia in general.  As I recall, my Momma had people in Georgia.  Wonder how their “Mommas an’ them” are doing?   Bill J

    Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >