Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 107/176 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• Can't connect to wireless without typing sudo modprobe b43 in terminal

  - by user90889

  I just upgraded to 12.04 on an old ACER Travelmate 5320 using Broadcom 4311. I wasn't able to connect to the internet through the wireless for a few days. It didn't even display wireless networks. I was finally able to make it work by following the instructions found here: http://linuxwireless.org/en/users/Drivers/b43#supported However, each time I log on to the computer I have to go to the terminal and type sudo modprobe b43 to make the wireless work. Is there somehow I can avoid this? I have used Ubuntu for many years but always relied on other people to help me with the technical stuff. The terminal is alien to me so I literally follow online forum instructions without knowing what I'm doing. Also, I tried many many things before I managed to make it work. So I'm worried I may have installed something that now conflicts with whatever the sudo modprobe b43 does. Thank you

  Read the article

• Error when I compile kernel 3.3.2 in ubuntu 12.04

  - by rock-alternativo

  I thinks is not a bug of ubuntu. This is the output: OBJCOPY arch/x86/boot/vmlinux.bin HOSTCC arch/x86/boot/tools/build BUILD arch/x86/boot/bzImage Setup is 16800 bytes (padded to 16896 bytes). System is 4599 kB CRC f77d64c0 Kernel: arch/x86/boot/bzImage is ready (#1) Building modules, stage 2. MODPOST 3268 modules ERROR: "__modver_version_show" [drivers/staging/rts5139/rts5139.ko] undefined! WARNING: modpost: Found 4 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2

  Read the article

• Using two ethernet connections (Internet enabled) simultaneously

  - by vedarthk

  I have searched and read over the Internet and also on askubuntu. i am using Ubuntu 11.04 and my question or the thing that I want to achieve is efficient use of both the connections and thus increasing my browsing and downloading speed. I want my system to decide which packet should be routed over which interface. I want to know if this is possible. For example, Is it possible to route alternate packets over the two interfaces ? Please let me know any Internet resource or If I would have to insert any code into the network drivers etc. ?

  Read the article

• I can't get a native resolution of 1920x1080 on 11.10 (AOC f22 on a Nvidia Geforce GTS 450)

  - by Mikeeeee

  I have a problem were the highest resolution I can get is 1360x769, this is a 22 inch LCD monitor with a native resolution of 1920x1080_60 I have tried numerous drivers but nothing changed I tried editing the xorg.conf scipt with no success (I am a noob with linux though). Running many commands in terminal witch I got from people with similar problems only gives me errors like "Failed to get size of gamma for output default. I get edid checksum is invalid error on boot down also. I think there maybe a communication problem between my screens EDID and ubuntu although xp and windows 7 detect my screen without any errors and automatically set native resolution. also when I am installing ubuntu I get a horrible screen flashing every few seconds until I have installed the nvidia driver. pc specks if it helps x64 os, mainboard N68PV-GS, 4 gig ram, AMD Phenom(tm) 9350e Quad-Core Processor × 4, Nvidia Geforce gts450 512mb, hard drives set up in a onboard nvidia raid array striped. realy need to get a better resolution, 1360x769 does not look nice on a 22 inch screen. ty

  Read the article

• Four monitor setup with two Nvidia graphics cards

  - by user94329

  I'm running Ubuntu 12.04 and I have two nVidia quadro 2000 video cards, each with two monitors plugged in (all 4 monitors are identical). Now I have the latest nVidia drivers, and I'm trying to use the nVidia control panel to use all four monitors, and I can't get it to work. Currently, my configuration is using TwinView to have 2 monitors per X screen. This doesn't work well because either i turn xinerama on, and nothing appears on the screen when I start a X session with Compiz enabled. Things only work in Ubuntu 2D. i turn xinerama off, and compiz works, but now, I cant drag windows between the two screens and i have no idea how to start applications in the other screen. Is there a better way to configure my four monitor setup? Is there a way to get both GPUs onto a single X screen?

  Read the article

• Ubuntu 12.04 I'm trying to ugrade my Geforce 8400 to Geforce GTX 560, getting a black screen

  - by Stuart Anderson

  I have an NVidia Geforce 8400 which is working fine in Ubuntu 12.04. I have just purchased an NVidia GeForce GTX 560 and have been trying to install it. No matter what I do all I get is a black screen on boot up. I have tried; 1/ Additional Drivers, driver version 295.40, this works for the GeForce 8400 but gives me a black screen with the GTX 560 when I boot. 2/ Downloaded driver version 295.40 from NVidias site, was able to install it successfully, it works with my 8400 but gives me a black screen with the GTX 560 when I boot. Are there any options I can try?

  Read the article

• Ubuntu 12.10 64b does not shutdown

  - by user108264

  I am a new linux user so i am not familiar with what actually is needed to check. When shutting down or trying to restart i get a screen with yellow letters and the system does not close or restart. I have to shut down manually. I can't type all the numbers but i will give the last ones. [90102.232650] [ end-trace 435966f5b367871 ] this seems to have happened after i downgraded the xorg so i can get drivers for my ATI card(4850HD). The suspend command works fine.

  Read the article

• Broadcom wireless card disappears after restart

  - by user10854

  I used 'additional drivers' to install 'Broadcom STA wireless driver' and it returns an error. Within jockey.log it says the following numerous times. 2011-02-14 21:24:06,945 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted After it returns the error the network card will work temporarily until I restart the laptop. When I restart I got to go through the procedure again of trying to activate the driver, returns an error however it works temporarily. The network card is as follows on a Dell Inspiron 1545: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] Rev 01 I have been trying to solve this myself for many hours. Any help is appreciated/

  Read the article

• Need to run `nvidia-xconfig` before booting

  - by RobinJ

  I formatted my whole hard drive, and installed Elementary OS (Ubuntu 10.10) on it in an attempt to get rid of all the problems. It failed. Every since I installed the nvidia-current drivers I first need to boot into recovery mode, and run sudo nvidia-xconfig before booting the system in the normal way. If I don't do this, it will just stop at a black screen after the boot screen, responding to nothing but CTRL+ALT+DELETE and the power button. When I boot the system after running the nvidia-xconfig command I can just start working as usual. Update I suspect it's got something to do with Plymouth. I shall have to try it again before I can confirm it, but removing the quiet and splash parameters from the kernel line in /boot/grub/grub.cfg seems to help. But still, I like my Plymouth screen. A black screen with text rolling over it (or without the text) doesn't attract me much.

  Read the article

• Any chance for fully working X1600 PCI-E ID 71c3/Unity under Ubuntu 12.04?

  - by user74975

  How can I get Unity working under an ATI Radeon X1600 PCI-E on Ubuntu 12.04? I'm rather Windows guy, but I can do some things with CLI. ATI seems to have ended support for this card for both Windows and Linux. Theres no proper driver in jockey; binary driver from Software Center doesn't give Unity, just Unity 2D. Yes, I've tried the commands from this post - without any positive results; should I try installing drivers manually?

  Read the article

• Computer crashing after a few minutes of logging in

  - by user88612

  I have a fresh install of 12.04.1 on my machine. It is constantly crashing after logging in. I noticed it crashed repeatedly when using Minitube and would crash in Chrome. It seems to be that anything graphics related is causing it? I've booted the system 7 times and each time it would crash within 5-10 minutes after logging in. I have no swap and it's a dual-boot system with Windows 7. My system specs: AMD Phenom XII 925 8GB DDR3 (new) AMD Radeon HD 7770 GPU (new) Seagate 1TB Barracuda HDD (new) Catalyst Drivers

  Read the article

• Dell Latitude D830 DVD Drive Not Recognized

  - by DragonFire

  Unlike some people who have issues with the video or WiFi drivers, I suffer from not being able to use the DVD drive on this laptop. Upon POST, the BIOS sees it and I am able to open the tray as well; however, once the system starts to load up Ubuntu or other distros (Debian and Linux Mint), I lose all functionality. Plus, I don't see it listed as a device in the OS. I've poured over the internet the past few days trying to see if anyone else has the issue, or did and found a solution but sadly, nothing anywhere so far. So, I thought I would ask the community here and see what you all think. Worse case scenario, I have some dead weight to a nice little machine. Thanks! PS I honestly think Linux doesn't like the IDE interface the disc drive has.

  Read the article

• Why can't I access hw:1,0 until gstreamer-properties is run once?

  - by Shadd

  Not necessarily an Ubuntu-specific question but I wasn't sure where else to ask. I have an AverMedia DVD EZMaker 7 which plugs into USB and works well on Ubuntu 12.04. I downloaded and installed the official drivers without error. However, when I try: gst-launch alsasrc device="hw:1,0" ! alsasink device="hw:0,0" it tells me: Setting pipeline to PAUSED ... Pipeline is live and does not need PREROLL ... Setting pipeline to PLAYING ... New clock: GstAudioSrcClock which is the normal output, however there is no audible sound. Trying the command again doesn't help. If I run gstreamer-properties and close it right away (don't need to touch any controls), THEN the gst-launch command works. If I unplug the device and plug it back in or restart the computer, I have to run gstreamer-properties again. What is gstreamer-properties doing that enables the audio?

  Read the article

• windows are moving slowly on ubuntu 11.10

  - by myildirim

  Video Card : ATI Mobility Radeon HD 3650 Therefore my video card ATI when i check system info Driver : VESA: M86 Experience : Fallback i checked compiz config manager and disable all effects insipite of this windows are moving slowly.It does not for all windows,for example when i use google chrome and scrool up/down there is no effect but when i move window to another position it moves slowly but when i use pdf reader when i scrool up or down it moves slowly.How can i solve this ? i use core 2 duo intel cpu and run ubuntu 11.10. Edit : The Solution : Upgrade kernel and then update all graphic card drivers.Now there is no problem .

  Read the article

• No sound ubuntu 12.04, Tried everything

  - by user74679

  I've tried to find a solution to this but haven't been able to yet. I'm using ubuntu 12.04 installing using wubi installer. I have no audio. I can see the sound icon on the bar on top and interact with it. It doesn't say mute, it seems normal. "Codec:" /proc/asound/card*/codec* proc/asound/card0/codec#0:Codec: IDT 92HD75B3X5 proc/asound/card0/codec#1:Codec: LSI ID 1040 proc/asound/card1/codec#0:Codec: ATI R6xx HDMI Alsa shows all bars full for IDT 92HD75B3X5, no bars for ATI HDMI. Please help. I've reinstalled all drivers as well.

  Read the article

• 12.04 monitor brightness commands ignored

  - by jarvisschultz

  I cannot change the brightness of the monitor on a laptop either from the command line or from keyboard shortcuts. I have verified that the file in /sys/class/backlight/acpi_video0/brightness is changing. I have also verified that I am running the nvidia drivers. Things I have tried: Adding entries to /etc/default/grub The GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX entries now read GRUB_CMDLINE_LINUX_DEFAULT="quite nosplash acpi_backlight=vendor" GRUB_CMDLINE_LINUX="noapic" I have also tried various commands here (with an update grub and reboot each time) but nothing has helped I enabled brightness control in /etc/X11/xorg.conf so that it now looks like Section "Device" Identifier "Default Device" Driver "nvidia" Option "NoLogo" "True" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Investigated installing linux-kamal-mjgbacklight and determined it was not applicable to my system Nothing seems to have made any difference. I am using an Nvidia GeForce GT 330M with driver version 295.40. Does anyone have any other suggestions?

  Read the article

• Dual 7950, freezes during startup

  - by Hiro

  I have two identical video cards right now. Xubuntu will boot up no problem if I only have one card installed. If I install the 2nd card it will just hang midway thru the loading screen. Regardless of which card I use and which position on the motherboard, it will freeze if I have both installed. I've tried installing the proprietary drivers, both fglrx and fglrx-updates, still freezes in the same spot. Uninstalled those and went back to the default ones. The only way I can get a terminal is by booting into failsafe mode. Booting using 13.10 i386 on a USB stick gives me some errors related to what I think is the 2nd video card: [drm:r600_ring_test] ERROR radeon: ring 1 test failed (scratch(0x850C)=0xCAFEDEAD) [drm:r600_dma_ring_test] ERROR radeon: ring 3 test failed (0x02FFFF6B) radeon 0000:0200.2 disabling GPU acceleration"

  Read the article

• Steam not opening or responding at all

  - by user109409

  The steam client won't open nor does it display any error message. I have tried right click > Games. I ran steam steam://open/games command, but the client just does not respond. Removing it with apt-get remove steam, deleting the Steam directory & the .deb file and reinstalling it, did not work either. This problem only occurred after I used killall steam.sh to force quit it, it was working fine before. I'm running 12.10 on a 64bit laptop with no additional drivers installed. Anyone else have this problem and a possible workaround? Thank you

  Read the article

• No background/wallpaper in Ubuntu 12.04 - what to do?

  - by magnesus

  This is how my desktop looks like after moving Firefox window arround: The background just doesn't redraw, there is no wallpaper. It is like that since update to 12.04 - it was the same in 11.10 but I had special intel drivers then that fixed this problem. Doesn't seem to be fixed in 12.04 even with the ppa I was using then. What can I do? I couldn't find anything about it on Google because results were unrelated. :( I have Samsung RF-511 notebook with Nvidia card turned off - so it's using only Intel from i7.

  Read the article

• HD 6770M low graphics mode after update (AGAIN)

  - by Pihkal

  I have Ubuntu 12.04 LTS (re)installed on this laptop: I've also installed the fglrx-drivers for my ATI card (using apt-get),it appeared to work fine,that is until i updated my distro. Once again i got the "low graphics mode" error when i booted into the new kernel,booting in the old kernel works fine however. When i look into the logs i see "no screen found". This is the second time i install Ubuntu and the second time i run into problems with my graphics. Reinstalling isn't a solution since the problem keeps comming back. My question now is: does anyone know a REAL solution for this issue ar at least knows what's causing it? Any help would be greatly appreciated.

  Read the article

• bootscreen downscaled

  - by blackmist

  my specs intel mb dh67cl corsair 4gb ram nvidia 560ti gtx i5 processor dell 22" monitor 1920x1080 firstly, i began using ubuntu last year. now im in love with it. just one minor detail i dont like is that the bootscreen changed just after the first boot. now im using 12.04.1. i will explain how it happened. first i installed ubuntu via windows. so it booted for the first time and life was beautiful. the resolution was 1920x1080. then i installed the nvidia drivers, all the updates and codecs for the medias. now the ubuntu bootscreen downscaled to a lower resolution. i tried searching for answers, but nothing was for ubuntu 12.04.1. since im a newbie, i didnt want to take any chances. i need help. i like the bootscreen.

  Read the article

• How do i allow non-root access to /ttyUSB0 on 12.04?

  - by yurividal

  Since i updated from 10.04 to 12.04, i am unable to acces the device connected in /ttyUSB0 if i dont have root access. To be more specific, i use a usb-to-serial com port converter to acces and configure Cisco equipment with a software called Putty. It happens that, since i upgraded to 12.04, Putty only sees the connected device when i run it as "gksudo putty". If not, it says "unable to connect to port /ttyUSB0". I have managed to change the permissions via chmod 666, and it works, but if i disconnect the usb and reconnect, it goes back to root only. How do i permanently allow non-root access? I have a clue it might be via udev rules, but i have NO IDEIA how to do it. obs. Manufacturer and drivers "PROLIFIC"

  Read the article

• How can I get my printer working after upgrading to (K)ubuntu 13.10?

  - by Sparhawk

  When using (K)ubuntu 13.04, my network printer worked fine. After upgrading to (K)ubuntu 13.10 today, I can no longer print. I get the error "The printer is not responding." I've tried to add the printer again, and it is automatically recognised. I can add it, and select it from print dialogue boxes, but I get the same error. Brother HL-2040, Kubuntu 13.10 (KDE 4.11.2) ==EDIT== I attempted connecting the printer directly with a USB cable, and this worked fine, so it's not a problem with drivers. (FWIW I'm using the recommended HL-2040 Foomatic/hl1250.) Further, it prints fine over the network from my wife's MacBook.

  Read the article

• Samsung NC10 Broadcom difficulties

  - by simonp

  I am new to Ubuntu/Linux and am stuck already! Any help much appreciated. I have managed to install Ubuntu Maverick 10.10 (from a USB flash drive) on my NC10 which also has Windows 7 on the partitioned drive. But the wireless internet is not working. I have identified the hardware as a Broadcom BCM4313. I have also managed to find that the correct driver is installed (Modaliases for Broadcom 802.11 Linux STA driver). I have followed advice from elsewhere and there does not seem to be any competition from other drivers. I am now stuck and do not have any other internet access on this netbook. Any ideas?

  Read the article

• Installing Ubuntu 11.10 on HP Envy 15 - Partition Problems

  - by imparator

  I am trying to install Ubuntu 11.10 on my HP ENVY 15, however I am getting some problems. When I come to the partitioning section of the installation I am given my 4 partitions that I have. I change the partition of my 450 gb to 420 gb, so that I can use that 30gb space that I free up to install Ubuntu on it. After I do this step, instead of seeing the keyword to the 30gb I see unusable. I have read that there can not be more than 4 partitions somewhere for a UBUNTU installation, but that is not true, because I just installed Ubuntu 11.10 on my Lenovo which has the same amount of partitions as my ENVY ( I do get problems on my lenovo with installing ATI drivers but that is a completely different story). Does anybody have an idea of why I am getting an unusable notification next to my freed up space?

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >