Search Results

Search found 2866 results on 115 pages for 'benjamin dell'.

Page 108/115 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

    - by Biohazard
    I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

    Read the article

  • Rescue system running TFS that BSODs, into vmware esxi

    - by 3molo
    Hi, After moving to new facilities, one of our old Dell servers running Windows Server 2003 R2 on PowerEdge 2650 HW BSODs with 0x8e. The server runs Team Foundation Server, so we have a few guys dependent on it. No one here knows TFS, so we have no idea how difficult it would be to setup from scratch. We have the MSSQL database(s) backed up, recent and fresh copy. Tried removing/refitting memory modules, but with no success. The system boots into safe mode but hangs occasionally. I booted a linux livecd and did a dd of both c: and d:, so I have all the data in compressed images on a vmware machine. For the guest, I created a 38G (actually it became 40GB) partition to act as C:, and booted a live cd. I then uncompressed the compressed disk image of c: and dd'd it to the new c: using 'gunzip -dc c.img.gz | dd of=/dev/sda1 bs=1M'. The operation ran for about 1000 seconds, and completed successfully. I assumed it would at least try to boot windows (but most likely BSOD due to not having correct drivers), but the Vmware ESXi guest does not seem to recognize it as a bootable disk. We don't have the vmware enterprise license, so the vmware converter cold cloning is not an option. Did I do something wrong in my dd's etc with the ISOs, or why would it not (try to) boot? Am I wasting my time? What other approach is there? Will continue to try to remove services and drivers to make the physical machine at least work reasonably well in safe mode. What do you suggest? 1. Continue to get the dd'd images to the virtual disk and get it to boot. 2. Install a new windows server, get team foundation server and restore from backup. 3. Focus on the old problematic hardware Any help appreciated

    Read the article

  • Windows 7 breaks even in safe mode

    - by delenda
    Hi, I have a Dell XPS M1730 with Windows 7 installed. I noticed last night that after a few hours of use, the fans kicked into full and I couldn't do anything without it taking forever. Minimising windows, opening device manager or even opening process explorer took minutes and a game install I had just started took nearly 4 hours to complete. When procexp finally loaded, the refresh was so slow that it was mostly useless. From what I could gather, it was reporting 60% idle processes with procexp using nearly 40%. There were no hardware interrupts listed. When I rebooted, the problem went away for about 10 minutes and then the same thing happened. The issue persists in safe mode and even after I removed the graphics drivers, which have been an issue in the past, it still happens. Icons flash quite quickly on the desktop periodically and screen refresh is painfully slow. When booting now, the fans kick in to full as soon as the windows logon box comes up and it's taking 10 minutes to bring the desktop up. Chkdsk reports nothing and the raid check says that everything is fine. I'm thinking hardware failure, probably HDD but wanted some other opinions. I'm planning to try a linux live cd to see if it works without using the hard disks. If anyone has any input, it would be greatly appreciated. Delenda

    Read the article

  • How do I get rid of these "There is a problem with your tablet driver" messages?

    - by Adam Rosenfield
    Every time I run certain applications (including but not limited to GIMP, Microsoft Visual Studio, and 3DS Max), I get the following message box: There is a problem with your tablet driver. Please reboot your system. If the problem persists reinstall or update the driver. Obviously I've tried rebooting and that hasn't fixed anything. Secondly, I'm not running a tablet PC. This is just Windows XP SP3 running on a Dell Precision PWS490 desktop workstation. How do I get rid of these error messages? The applications still load normally after dismissing them, but they're rather annoying. Using Process Explorer, I got the call stack from the message box. It's coming from wintab32.dll. Here's the call stack when running GIMP (irrelevant frames omitted): ... 8 USER32.dll!MessageBoxA+0x45 9 wintab32.dll!WTMgrPacketHookExA+0x44a 10 libgdk-win32-2.0-0.dll!gdk_display_list_devices+0x37 ... So, does anyone know how I can get an updated version of wintab32.dll or have any other ideas? I've been keeping my system up to date with Windows Updates. The timestamp on wintab32.dll is 2007-03-30 17:38, and its MD5 sum is ffdc332007c9dc6dd346c8ac2b09a015.

    Read the article

  • The BitLocker encrypted logical drive of my laptop is not accessible. On clicking error appears,"Application not found"

    - by Nauman Khan
    I had an important personal data that was stored in my laptop drive 'F'. My 4 year old son also uses my laptop to play games. To secure my data I used bitlocker software that was already there in my windows 7 ultimate 32 bit. I am using a Dell D 630 Core2Duo laptop. The thing worked fine for me and I have been able to access my data in drive 'F' as and when I required. But today, when I tried to open my 'F' drive, an error box appeared saying "Application not found". I right clicked and checked 'properties' of 'F' drive. It showed me Used Space = 0 bytes and Free Space = 0 bytes. I opened 'Disk Management' which showed my 'F' drive file system as 'Unknown (Bitlocker Encrypted). 'Disk Management' is also showing my 'F' drive as healthy logical drive. I opened 'Manage bitlocker' and found that my 'F' drive was being shown locked and 'Unlock Drive' was displayed against it, however, when i click on 'Unlock Drive', it does not function. I opened 'TPM Administration' and found an information that 'Compatible TPM cannot be found'. My bitlocker encryption was working fine which means that I had a compatible TPM in my laptop. Where has it gone? How can I enable it? Is my 'F' Drive lost forever and thus the data in there as well?

    Read the article

  • Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

    - by Peeter Joot
    I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

    Read the article

  • No network connection for vmware esxi guests

    - by JavaDev
    I'm new to VMware and setting up an Esxi server as a trial with the intention of possibly virtualizing some of our servers in the near future. I have setup ESXi on a Dell poweredge server, and installed a Centos 5.6 and Ubuntu 11.04 guest os on the server. However I cannot get networking on my guest OS's. The host is connected to a network with a DHCP server via a switch and is configured with a static IP. I have the default set-up for networking on the host: both guests are connected to the default vmnic1 adapter via the virtual switch vSwitch0. One thing though, the virtual adapter shows 'Observed IP ranges' to be XXX.XXX.XXX.194-XXX.XXX.XXX.195 (I've blanked out the initial prefixes) i.e just 1 address, even though the network the host is connected to has the usual 255.255.255.0 subnet mask. On the guest machines (using DHCP) by default, I can see an eth0 interface but with no connection or assigned IP address. A physical machine connected to the network gets a DHCP lease as expected. How do I get networking working on my guest OSes? Apologies for the long-winded question.

    Read the article

  • What to do with old laptop screens?

    - by Lord Torgamus
    This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

    Read the article

  • How does one skip “Windows did not shut down successfully” in Win7-64?

    - by XenonofArcticus
    Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

    Read the article

  • Outlook 2007 - repainting (?) problems when copying and pasting between windows: have to switch focus before pasted text is visible

    - by Rory
    For some time now I've had a problem when copying and pasting between Outlook 2007 windows, or from other office apps into Outlook 2007. When I paste, say into a new email, the email window's text area goes blank. The window isn't 'not responding', the To and Subject contents are still visible, but it looks like all the text in the email has been deleted. Initially I thought it was just taking ages to paste, but it turns out I need to switch focus to another window and then switch focus back to the Outlook window. Only then does the body of the email repaint itself. It's at the point that I click onto the Outlook window that the body area changes from blank white to showing all the text that was there before plus the pasted text. Any ideas? I've updated my graphics driver. Not sure what else it could be. I do sometimes have similar problems in Visual Studio 2010 too: when I paste text into a code window it doesn't show immediately, but the rest of the window shows what was there before I pasted. I'm using Win XP with all updates applid, on a Dell Vostro 1510.

    Read the article

  • Ubuntu: Memory Leak

    - by Keener
    I'm having trouble finding from where this memory leak is occurring. I'm running Ubuntu 8.04 LTS on a Dell XPS M1530. I have 3GB of ram and I'm finding after about an hour or so of use top shows me 2GBs+ used. The strange thing is when I add up the memory percentages by PID either from top or ps aux I find that I should only be using about 20-25% of my available ram. What brought this to my attention was I've begun running vmware server again. Now, obviously the ram usage spikes when I load a virtual machine, but the memory VMware is using does not account for the memory usage I'm seeing via top or free. Stopping vmware server releases the memory which was allocated to it, but I'm still unable to find where this RAM is being used. After a complete reboot, of course, the memory is fine, but very quickly it climbs to 60-80% usage with the processes only appearing to account for a third of that. Any ideas where I should look for more information on what this could be?

    Read the article

  • After installing Windows 7, I can no longer get to Debian 6 (dual boot)

    - by Jeremy
    I had Debian 6 on my machine (Dell Vostro 260) and used GParted to shrink the partition. I then tried installing Windows 7 on that partition. After Windows 7 installed, I could not choose which OS to run. It would just boot into Windows. I ran GParted again, and saw that Windows created another partition, labeled "System Reserved". That partition had the boot flag set. I tried moving the boot flag to other partitions, including my Debian partition and one with a file system "linux-swap". No option would actually load an OS or anything except for the Windows partition, which is not what I want. Is it worth it to try to fix this installation, or should I start over. I have all my data backed up, so I can easily install from scratch if I need to. If I do start from scratch, which OS should I install first? And then, how do I set up the partitions to install the other OS? Let me know if you have any questions. Thanks for your help.

    Read the article

  • Windows 8 Windows Store (Metro/ModernUI) applications not working (just show 'busy' animation or white screen)

    - by davidm_uk
    I have a Dell XPS 15 which shipped with Windows 7 x64, which I recently upgraded to Windows 8. The process went surprisingly smoothly (given that this was an upgrade, not a complete re-install), and the system generally seems very stable. However, today I noticed that several of the Windows Store apps don't work: they all behave in the same way, launching but then showing a spinning 'wait' animation indefinitely. This is affecting the standard Microsoft Mail, Store, Weather, News, Travel, Finance, Sport, Games and Music apps. The Bing app just shows a Bing logo on a coloured background (but no wait animation). The Calendar, Photos and SkyDrive apps open but then show a white screen. The Maps and Camera apps work without problems. The live tiles on the Start screen are updating correctly, for example the Mail app's tile shows a summary of new mail despite the Mail app's problems. All of these applications were working correctly a few days ago. I'm sure I've used several without problems since the last Windows update occurred on 7th November. Any suggestions on what might have happened and/or how to fix it would be very welcome. I don't need these Windows Store applications, but the fact that they're not working is irritating me.

    Read the article

  • Did my hard drive fail or is it something else?

    - by Julian
    Last night while I was watched a movie on my laptop the external monitor just went blank and the built-in display froze. Weird I thought, so I restarted it only to be greeted with this heart-breaking message. "No Operating System Found". After a few panicked restarts I accepted the fact that my hard drive might be done :(. Being the resourceful technie that I am, I whipped out Ubuntu Live on my old Flash Drive and was up and running before day break. I cannot access the hard drive through Ubuntu (which I expected) but I also cannot access my DVD drive either! This got me thinking that it might not be the hard drive and some other component that they hdd and the dvd uses. Hopefully this is the case. Which component is the most likely culprit? What tools can I use from Ubuntu Live on my USB flash drive to find out? I'm in a bad place without my hdd, thanks in advance for any assistance provided! P.S. My laptop makes a weird noise when I try to access or eject my DVD within the slot. Also my HDD makes a weird noise sometimes. Not sure how to describe it. System Specs: Dell 1558

    Read the article

  • Servers - Buying New vs Buying Second-hand

    - by Django Reinhardt
    We're currently in the process of adding additional servers to our website. We have a pretty simple topology planned: A Firewall/Router Server infront of a Web Application Server and Database Server. Here's a simple (and technically incorrect) diagram that I used in a previous question to illustrate what I mean: We're now wondering about the specs of our two new machines (the Web App and Firewall servers) and whether we can get away with buying a couple of old servers. (Note: Both machines will be running Windows Server 2008 R2.) We're not too concerned about our Firewall/Router server as we're pretty sure it won't be taxed too heavily, but we are interested in our Web App server. I realise that answering this type of question is really difficult without a ton of specifics on users, bandwidth, concurrent sessions, etc, etc., so I just want to focus on the general wisdom on buying old versus new. I had originally specced a new Dell PowerEdge R300 (1U Rack) for our company. In short, because we're going to be caching as much data as possible, I focussed on Processor Speed and Memory: Quad-Core Intel Xeon X3323 2.5Ghz (2x3M Cache) 1333Mhz FSB 16GB DDR2 667Mhz But when I was looking for a cheap second-hand machine for our Firewall/Router, I came across several machines that made our engineer ask a very reasonable question: If we stuck a boat load of RAM in this thing, wouldn't it do for the Web App Server and save us a ton of money in the process? For example, what about a second-hand machine with the following specs: 2x Dual-Core AMD Opteron 2218 2.6Ghz (2MB Cache) 1000Mhz HT 16GB DDR2 667Mhz Would it really be comparable with the more expensive (new) server above? Our engineer postulated that the reason companies upgrade their servers to newer processors is often because they want to reduce their power costs, and that a 2.6Ghz processor was still a 2.6Ghz processor, no matter when it was made. Benchmarks on various sites don't really support this theory, but I was wondering what server admin thought. Thanks for any advice.

    Read the article

  • retain last used path to location for saving files in Windows 7

    - by Mark Miller
    I am using Microsoft Office 2010 and Windows 7 on a Dell PC. I am opening a bunch of MSWord files one at a time, copying data tables therein, pasting the data into Excel and saving the Excel files as comma delimited text files. I am creating a separate Excel file for each MSWord file. The path to the folder containing the saved comma-delimited files is quite long, something like this: c:\users\me\aa\bb\cc\dd\ee\ Every time I open Excel and save a new comma-delimited file I have to re-navigate the entire path (c:\users\me\aa\bb\cc\dd\ee). In the past Windows seemed to remember the last used path, saving a lot of tedious key-strokes. In fact, I think Windows did this for me as recently as last week, albeit on a different computer. Can I apply a setting in Windows somewhere asking it to offer the last used path as a default when saving files so I do not have to re-navigate the entire directory structure to save each new comma-delimited file? If I can, how so? Where is the option for specifying that setting? Thank you for any help.

    Read the article

  • I need to build a mini computer lab with 6 PCs

    - by chiurox
    Hello everyone, This weekend I need to build a mini computer lab with 5-6 PCs. The purpose is for a small computer class that will be taking place. They're mostly going to be doing office and daily kind of stuff, so nothing high performance. However, I hope it will last at least for 2 more years. I already have some parts for 2 PCs, one is a P4 3.0 and another is Celeron 2.4GHz, both socket 478. For the other 4 PCs, I'm wondering if I should buy individual parts and put it all together or get workstations like those Dell Optiplex with P4s. To put things into perspective, I am not currently in the US. I'm in South America and prices here are ridiculously. Another really important thing is that I need to share an internet connection between a total of 8 PCs at this place. Right now I only have a crappy wireless router, should I get another one? Or go with switch hub? I'm not experienced in this matter. Thanks guys!

    Read the article

  • Microphone array support in Windows. Info on performance and compatible hardware?

    - by exinocactus
    It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

    Read the article

  • Blue screen of Death on Install

    - by Toby Allen
    I have a machine with Windows Vista Installed. It has an Intel X25 SSD as the System Drive I want to reinstall (I plan to format and overwrite Vista) with XP. When I boot up using the Dell XP CD it loads the initial drivers then i get a Blue Screen. This is quite concerning. The installed OS works ok, but its giving problems so I want to remove it. Should I just format the SSD and try again? Will this make any difference? Can I do something to avoid hitting the Blue Screen? Its possible I had corrupt sectors on one of the other disks, will a new XP install use the System drive or drive 0? Can I force the install to use a specific drive when installing? Error: *** STOP: 0x0000007B (0xF78D2524,0x0000034,0x00000000,0x00000000) I never did find the answer, however I removed the SSD and tried to install on other disk - CRASH I disconnected the other disk and tried to install with only SSD plugged in - CRASH I removed 1 block of RAM - CRASH I used a windows 7 CD - NO CRASH

    Read the article

  • ATI Radeon 5670 Won't Show Resolutions over 1400x900

    - by Phil Sandler
    Just got my new Dell computer with Windows 7 and an ATI Radeon 5670. I attached it to my current monitor, which is a Samsung 24" (2443bwt). Windows 7 does not allow me to display in resolutions greater than 1400 x 900. The setup through a VGA cable into the VGA port of the card. The card also has a DVI port, but I need to use the VGA port because a KVM that supports VGA only. My old PC (which is Windows XP, GeForce 8600 video) can display in 1900 x 1200 on the same monitor (which is what I want) and even higher. It does this through a vga cable also connected to the KVM (through the DVI port but using an adapter). I have tried the same setup (DVI = VGA adapter) on the new PC and nothing changed. I have tried: Updating the drivers via Windows "Update Driver" (says they are current) Installing the updated version of the drivers from ATI (made no difference) Installing Powerstrip (all the options I would need for a custom resolution are greyed out) Installing the drivers/software from ATI caused the ATI Catalyst Control Center software to stop functioning, so I can no longer even start it. I have found some references to other people having this problem and instructions on cleaning the software off and reinstalling it (as uninstalling normally doesn't solve it). I will try this tonight. In any case, I didn't see any options in CCC that would allow me to override the settings for max resolution. However I didn't tinker with it too much before I tried updating the drivers, so I may have missed a setting. I contacted Samsung via online chat and they say it's a problem with the video card/driver (of course--what else would they say?). Any thoughts on what else I could try?

    Read the article

  • file read performance degrades as number of files increases

    - by bfallik-bamboom
    We're observing poor file read IO results that we'd like to better understand. We can use fio to write 100 files with a sustained aggregate throughput of ~700MB/s. When we switch the test to read instead of write, the aggregate throughput is only ~55MB/s. The drop seems related to the number of files since the throughput for read and write are comparable for a single file then diverge proportionally as we increase the number of files. The test server has 24 CPU cores, 48GB of memory, and is running CentOS 6.0. The disk hardware is a RAID 6 array with 12 disks and a Dell H800 controller. This device is partitioned with ext4 using the default settings. Increasing the readahead (using blockdev) improves the read throughput significantly but it still doesn't match write speed. For instance, increasing the readahead from 128KB to 1M improved the read throughput to ~145MB/s. Is this a known performance issue in our OS/disk/filesystem configuration? If so, how can we tell? If not, what tools or tests can we use to further isolate the issue? Thanks.

    Read the article

  • running a laptop continuously

    - by intuited
    I have an experienced laptop — a Dell Latitude D400, with a Pentium M CPU — that I'd like to run as an always-on server. This model was launched in 2004; I got mine second-hand in about 2007. I've heard that continuous operation is generally not a good idea with consumer hardware, but am lacking in specific knowledge about related problems, and have little idea of how much such usage patterns would reduce the lifespan of the machine. I'm mostly concerned with the unit's core components; parts such as the hard drive which are readily replaceable are, well, readily replaceable. What sorts of things can I do to increase the lifespan of this machine under such circumstances? For example, I'm guessing that it would be wise to limit the CPU frequency or take other steps to keep the internal temperature low. However, I'm not sure where the point of diminishing returns would lie with such an approach — 50°C? 40°C? Would it be useful to suspend the machine periodically, for perhaps an hour each day, or a few hours each week?

    Read the article

  • Sudden "No Signal" in HDMI-DVI connection

    - by nazikus
    Yesterday I have connected external display Asus VW192C to my laptop Dell XPS 14-L421X via HDMI-to-DVI-D cable. And it worked perfectly fine from start. The day after, Asus screen went blank showing "No signal". Every time I connection/disconnection cable or power off/on the display it says "No signal". And I didn't change any system configurations meanwhile. To troubleshoot the problem, I have tried to connect laptop to TV (hdmi-to-hdmi) - it was fine. I've tried to connect a different laptop to the display via the same cable - worked fine as well. So its obviously something on system level, either Windows or graphics drivers. Also it seems that Windows still see the external display (I can move mouse pointer away from the main screen in Extended mode), but there's just no signal. Any ideas? What else to try? PS. My laptop has 2 graphics cards - GeForce 630M and Intel HD 4000 using NVidia Optimus technology. I have updated to latest Intel and NVidia drivers, still didn't help. PPS. Although I shouldn't have updated (from Intel support): "our Intel generic graphics drivers from the Intel website do not support using both Intel Graphics 4000 and NVidia GeForece GT630M". Nevertheless, it should not affect connectivity to additional display.

    Read the article

  • Windows 7: resizing the 'Save As' window

    - by Mark Miller
    I do not know whether my question is appropriate for this forum. Apologies if it is not. I am running Windows 7 Professional with Service Pack 1 on a Dell Vostro 460 PC. I am downloading journal articles from the internet and saving them as *.pdf files. Somehow I unintentionally clicked a button that resulted in the 'Save as' window filling the entire screen of my computer, except for the toolbar at the very bottom. How can I resize the 'Save as' window so it only fills perhaps somewhere around 25% of the computer screen, or whatever the default size for that window is? I have searched the internet extensively and found one or two threads about this problem, but no specific solutions were posted there. One suggestion was to grab the bottom of the window with the mouse and scroll upward until the window was the desired size. That does not appear to be possible in my case. Another suggestion was to click on the window with the middle mouse button before attempting to resize the window, but that does not appear to help in my case either. Thank you for any help. If I should post this question in a different forum here please let me know, or kindly migrate the question to the appropriate forum. If additional information is necessary before a solution can be attempted, please let me know that as well.

    Read the article

  • Windows 7 pc freezes for an indeterminate amount of time after unlocking

    - by pikes
    Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >