Search Results

Search found 10442 results on 418 pages for 'blog'.

Page 108/418 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • Conducting Effective Web Meetings

    - by BuckWoody
    There are several forms of corporate communication. From immediate, rich communications like phones and IM messaging to historical transactions like e-mail, there are a lot of ways to get information to one or more people. From time to time, it's even useful to have a meeting. (This is where a witty picture of a guy sleeping in a meeting goes. I won't bother actually putting one here; you're already envisioning it in your mind) Most meetings are pointless, and a complete waste of time. This is the fault, completely and solely, of the organizer. It's because he or she hasn't thought things through enough to think about alternate forms of information passing. Here's the criteria for a good meeting - whether in-person or over the web: 100% of the content of a meeting should require the participation of 100% of the attendees for 100% of the time It doesn't get any simpler than that. If it doesn't meet that criteria, then don't invite that person to that meeting. If you're just conveying information and no one has the need for immediate interaction with that information (like telling you something that modifies the message), then send an e-mail. If you're a manager, and you need to get status from lots of people, pick up the phone.If you need a quick answer, use IM. I once had a high-level manager that called frequent meetings. His real need was status updates on various processes, so 50 of us would sit in a room while he asked each one of us questions. He believed this larger meeting helped us "cross pollinate ideas". In fact, it was a complete waste of time for most everyone, except in the one or two moments that they interacted with him. So I wrote some code for a Palm Pilot (which was a kind of SmartPhone but with no phone and no real graphics, but this was in the days when we had just discovered fire and the wheel, although the order of those things is still in debate) that took an average of the salaries of the people in the room (I guessed at it) and ran a timer which multiplied the number of people against the salaries. I left that running in plain sight for him, and when he asked about it, I explained how much the meetings were really costing the company. We had far fewer meetings after. Meetings are now web-enabled. I believe that's largely a good thing, since it saves on travel time and allows more people to participate, but I think the rule above still holds. And in fact, there are some other rules that you should follow to have a great meeting - and fewer of them. Be Clear About the Goal This is important in any meeting, but all of us have probably gotten an invite with a web link and an ambiguous title. Then you get to the meeting, and it's a 500-level deep-dive on something everyone expects you to know. This is unfair to the "expert" and to the participants. I always tell people that invite me to a meeting that I will be as detailed as I can - but the more detail they can tell me about the questions, the more detailed I can be in my responses. Granted, there are times when you don't know what you don't know, but the more you can say about the topic the better. There's another point here - and it's that you should have a clearly defined "win" for the meeting. When the meeting is over, and everyone goes back to work, what were you expecting them to do with the information? Have that clearly defined in your head, and in the meeting invite. Understand the Technology There are several web-meeting clients out there. I use them all, since I meet with clients all over the world. They all work differently - so I take a few moments and read up on the different clients and find out how I can use the tools properly. I do this with the technology I use for everything else, and it's important to understand it if the meeting is to be a success. If you're running the meeting, know the tools. I don't care if you like the tools or not, learn them anyway. Don't waste everyone else's time just because you're too bitter/snarky/lazy to spend a few minutes reading. Check your phone or mic. Check your video size. Install (and learn to use)  ZoomIT (http://technet.microsoft.com/en-us/sysinternals/bb897434.aspx). Format your slides or screen or output correctly. Learn to use the voting features of the meeting software, and especially it's whiteboard features. Figure out how multiple monitors work. Try a quick meeting with someone to test all this. Do this *before* you invite lots of other people to your meeting.   Use a WebCam I'm not a pretty man. I have a face fit for radio. But after attending a meeting with clients where one Microsoft person used a webcam and another did not, I'm convinced that people pay more attention when a face is involved. There are tons of studies around this, or you can take my word for it, but toss a shirt on over those pajamas and turn the webcam on. Set Up Early Whether you're attending or leading the meeting, don't wait to sign on to the meeting at the time when it starts. I can almost plan that a 10:00 meeting will actually start at 10:10 because the participants/leader is just now installing the web client for the meeting at 10:00. Sign on early, go on mute, and then wait for everyone to arrive. Mute When Not Talking No one wants to hear your screaming offspring / yappy dog / other cubicle conversations / car wind noise (are you driving in a desert storm or something?) while the person leading the meeting is trying to talk. I use the Lync software from Microsoft for my meetings, and I mute everyone by default, and then tell them to un-mute to talk to the group. Share Collateral If you have a PowerPoint deck, mail it out in case you have a tech failure. If you have a document, share it as an attachment to the meeting. Don't make people ask you for the information - that's why you're there to begin with. Even better, send it out early. "But", you say, "then no one will come to the meeting if they have the deck first!" Uhm, then don't have a meeting. Send out the deck and a quick e-mail and let everyone get on with their productive day. Set Actions At the Meeting A meeting should have some sort of outcome (see point one). That means there are actions to take, a follow up, or some deliverable. Otherwise, it's an e-mail. At the meeting, decide who will do what, when things are needed, and so on. And avoid, if at all possible, setting up another meeting, unless absolutely necessary. So there you have it. Whether it's on-premises or on the web, meetings are a necessary evil, and should be treated that way. Like politicians, you should have as few of them as are necessary to keep the roads paved and public libraries open.

    Read the article

  • Applying Interactive Sorting to Multiple Columns in Reporting Services

    - by smisner
    A nice feature that appeared first in SQL Server 2008 is the ability to allow the user to click a column header to sort that column. It defaults to an ascending sort first, but you can click the column again to switch to a descending sort. You can learn more about interactive sorts in general at the Adding Interactive Sort to a Data Region in Books Online. Not mentioned in the article is how to apply interactive sorting to multiple columns, hence the reason for this post! Let’s say that I have a simple table like this: To enable interactive sorting, I open the Text Box properties for each of the column headers – the ones in the top row. Here’s an example of how I set up basic interactive sorting: Now when I preview the report, I see icons appear in each text box on the header row to indicate that interactive sorting is enabled. The initial sort order that displays when you preview the report depends on how you design the report. In this case, the report sorts by Sales Territory Group first, and then by Calendar Year. Interactive sorting overrides the report design. So let’s say that I want to sort first by Calendar Year, and then by Sales Territory Group. To do this, I click the arrow to the right of Calendar Year, and then, while pressing the Shift key, I click the arrow to the right of Sales Territory Group twice (once for ascending order and then a second time for descending order). Now my report looks like this: This technique only seems to work when you have a minimum of three columns configured with interactive sorting. If I remove the property from one of the columns in the above example, and try to use the interactive sorting on the remaining two columns, I can sort only the first column. The sort on the second column gets ignored. I don’t know if that’s by design or a bug, but I do know that’s what I’m experiencing when I try it out!

    Read the article

  • Parallelize incremental processing in Tabular #ssas #tabular

    - by Marco Russo (SQLBI)
    I recently came in a problem trying to improve the parallelism of Tabular processing. As you know, multiple tables can be processed in parallel, whereas the processing of several partitions within the same table cannot be parallelized. When you perform an incremental update by adding only new rows to existing table, what you really do is adding rows to a partition, so adding rows to many tables means adding rows to several partitions. The particular condition you have in this case is that every partition in which you add rows belongs to a different table. Adding rows implies using the ProcessAdd command; its QueryBinding parameter specifies a SQL syntax to read new rows, otherwise the original query specified for the partition will be used, and it could generate duplicated data if you don’t have a dynamic behavior on the SQL side. If you create the required XMLA code manually, you will find that the QueryBinding node that should be part of the ProcessAdd command has to be moved out from ProcessAdd in case you are using a Batch command with more than one Process command (which is the reason why you want to use a single batch: run multiple process operations in parallel!). If you use AMO (Analysis Management Objects) you will find that this combination is not supported, even if you don’t have a syntax error compiling the code, but you might obtain this error at execution time: The syntax for the 'Process' command is incorrect. The 'Bindings' keyword cannot appear under a 'Process' command if the 'Process' command is a part of a 'Batch' command and there are more than one 'Process' commands in the 'Batch' or the 'Batch' command contains any out of line related information. In this case, the 'Bindings' keyword should be a part of the 'Batch' command only. If this is happening to you, the best solution I’ve found is manipulating the XMLA code generated by AMO moving the Binding nodes in the right place. A more detailed description of the issue and the code required to send a correct XMLA batch to Analysis Services is available in my article Parallelize ProcessAdd with AMO. By the way, the same technique (and code) can be used also if you have the same problem in a Multidimensional model.

    Read the article

  • Blogging from the PASS Summit : WIT Luncheon

    - by AaronBertrand
    SQL Sentry is very proud to sponsor the 10th annual Women in Technology Luncheon at the PASS Summit. Probably 700 people in here - pretty crowded house. This luncheon is growing year over year and is always a refreshing and interesting event to attend. Bill Graziano kicks things off and introduces our moderator, Wendy Pastrick. The panel is made up of Stefanie Higgins (actually the founder of the WIT Luncheon event), Denise McInerney, Kevin Kline, Jen Stirrup and Kendra Little. Stefanie talked about...(read more)

    Read the article

  • Intel Server Strategy Shift with Sandy Bridge EN & EP

    - by jchang
    The arrival of the Sandy Bridge EN and EP processors, expected in early 2012, will mark the completion of a significant shift in Intel server strategy. For the longest time 1995-2009, the strategy had been to focus on producing a premium processor designed for 4-way systems that might also be used in 8-way systems and higher. The objective for 2-way systems was use the desktop processor that later had a separate brand and different package & socket to leverage the low cost structure in driving...(read more)

    Read the article

  • ArchBeat Link-o-Rama for 2012-10-11

    - by Bob Rhubart
    Whiteboards, not red carpets. OTN Architect Day Los Angeles. Oct 25. Free event. Yes, it's TinselTown, but the stars at this event are experts in the use of Oracle technologies in today's architectures. This free event includes a full slate of technical sessions and peer interaction covering cloud computing, SOA, and engineered systems—and lunch is on us. Register now. Thursday October 25, 2012, 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048 JDeveloper extensions where? | Peter Paul van de Beek "Where does the downloaded stuff go after you installed JDeveloper extensions, like SOA Composite Editor, Oracle BPM Studio, or AIA Service Constructor?" Peter Paul van de Beek has the answer. Using Apache Derby Database with WebLogic (the express way) | Frank Munz Another technical how-to video from Dr. Frank Munz. Compensation Hello World | Ronald van Luttikhuizen Oracle ACE Director Ronald van Luttikhuizen's post addresses several question that came up during the "Effective Fault Handling in SOA Suite 11g" session that he and fellow Oracle ACE Guido Schmutz presented at Oracle OpenWorld. Oracle Fusion Middleware Security: OAM and OIM 11g Academies Looking for technical how-to content covering Oracle Access Manager and Oracle Identity Manager? The people behind the Oracle Middleware Security blog have indexed relevant blog posts into what they call "Academies." "These indexes," the blog explains, "contain the articles we've written that we believe provide long lasting guidance on OAM and OIM. Posts covered in these series include articles on key aspects of OAM and OIM 11g, best practice architectural guidance, integrations, and customizations." Maximum Availability Whitepaper for IDM 11gR2 | Oracle Fusion Middleware Security The Oracle Fusion Middelware A-Team shares an overview of and a link to a new white paper: "Identity Management 11.1.2 Enterprise Deployment Blueprint." Thought for the Day "The trouble with the world is that the stupid are sure and the intelligent are full of doubt." — Bertrand Russell (May 18, 1872 – February 2, 1970) Source: SoftwareQuotes.com

    Read the article

  • Microsoft Delivers Full Suite of SQL Server Powershell Cmdlets

    - by merrillaldrich
    We’ve all been waiting several years for this, and finally it’s here! Coinciding (approximately) with the release of SQL Server 2012, a new Feature Pack has appeared on the Microsoft web site that adds a full suite of PowerShell cmdlets for DDL and other functions. This means that, at last, we can do things like fully-featured SQL deployment scripts without all the (severe) limitations of T-SQL, such as primitive use of variables, flow control, exception handling. Taking a cue, finally, from the...(read more)

    Read the article

  • SQL Server 2014 – delayed transaction durability

    - by Michael Zilberstein
    As I’m downloading SQL Server 2014 CTP2 at this very moment, I’ve noticed new fascinating feature that hadn’t been announced in CTP1 : delayed transaction durability . It means that if your system is heavy on writes and on another hand you can tolerate data loss on some rare occasions – you can consider declaring transaction as DELAYED_DURABILITY = ON . In this case transaction would be committed when log is written to some buffer in memory – not to disk as usual. This way transactions can become...(read more)

    Read the article

  • Buck Woody in Adelaide via LiveMeeting

    - by Rob Farley
    The URL for attendees is https://www.livemeeting.com/cc/usergroups/join?id=ADL1005&role=attend . This meeting is with Buck Woody . If you don’t know who he is, then you ought to find out! He’s a Program Manager at Microsoft on the SQL Server team, and anything else I try to say about him will not do him justice. So it’s great to have him present to the Adelaide SQL Server User Group this week. The talk is on the topic of Data-Tier Applications (new in SQL 2008 R2), and I’m sure it will be a great...(read more)

    Read the article

  • SQL Community – stronger than ever

    - by Rob Farley
    I posted a few hours ago about a reflection of the Summit, but I wanted to write another one for this month’s T-SQL Tuesday, hosted by Chris Yates. In January of this year, Adam Jorgensen and I joked around in a video that was used for the SQL Server 2012 launch. We were asked about SQLFamily, and we said how we were like brothers – how we could drive each other crazy (the look he gave me as I patted his stomach was priceless), but that we’d still look out for each other, just like in a real family. And this is really true. Last week at the PASS Summit, there was a lot going on. I was busy as always, as were many others. People told me their good news, their awful news, and some whinged to me about other people who were driving them crazy. But throughout this, people in the SQL Server community genuinely want the best for each other. I’m sure there are exceptions, but I don’t see much of this. Australians aren’t big on cheering for each other. Neither are the English. I think we see it as an American thing. It could be easy for me to consider that the SQL Community that I see at the PASS Summit is mainly there because it’s a primarily American organisation. But when you speak to people like sponsors, or people involved in several types of communities, you quickly hear that it’s not just about that – that PASS has something special. It goes beyond cheering, it’s a strong desire to see each other succeed. I see MVPs feel disappointed for those people who don’t get awarded. I see Summit speakers concerned for those who missed out on the chance to speak. I see chapter leaders excited about the opportunity to help other chapters. And throughout, I see a gentleness and love for people that you rarely see outside the church (and sadly, many churches don’t have it either). Chris points out that the M-W dictionary defined community as “a unified body of individuals”, and I feel like this is true of the SQL Server community. It goes deeper though. It’s not just unity – and we’re most definitely different to each other – it’s more than that. We all want to see each other grow. We all want to pull ourselves up, to serve each other, and to grow PASS into something more than it is today. In that other post of mine I wrote a bit about Paul White’s experience at his first Summit. His missus wrote to me on Facebook saying that she welled up over it. But that emotion was nothing about what I wrote – it was about the reaction that the SQL Community had had to Paul. Be proud of it, my SQL brothers and sisters, and never lose it.

    Read the article

  • We have moved to larger offices

    - by Chris Houston
    First of all we should probably apologise for the complete lack of blogging over the last 6 months! As web developers we are constantly telling our clients that they should keep their blogs up to date and it seems we have been ignoring our own advice.That being said, we have been very busy moving offices and helping our new host QV Offices setup their new business. As well as all the moving we have not been sitting on our hands, we have built the new site for DairyMaster over in Ireland as well as a separate private website for their global distributor network.As Umbraco Gold Partners we have found more and more that we are working on projects where we are the silent development partners, so although we cannot talk publicly about a lot of the sites we develop, we have some real beauties now in our portfolio :)Now that the dust has settled in our new office ( and has been hovered up! ) we are read for the new year and are looking forward to working on some exciting projects that are currently in the pipeline.We are also intending to run some Hacking sessions for Umbraco as we now have lots of space for developers to come and work with us, so if you have any ideas of a theme for an Umbraco Hackathon then do let us know.And with that it just remains to say Happy Christmas to you all and see you in the new year!

    Read the article

  • Presenting at Roanoke Code Camp Saturday!

    - by andyleonard
    Introduction I am honored to once again be selected to present at Roanoke Code Camp ! An Introductory Topic One of my presentations is titled "I See a Control Flow Tab. Now What?" It's a Level 100 talk for those wishing to learn how to build their very first SSIS package. This highly-interactive, demo-intense presentation is for beginners and developers just getting started with SSIS. Attend and learn how to build SSIS packages from the ground up . Designing an SSIS Framework I'm also presenting...(read more)

    Read the article

  • Reproducing a Conversion Deadlock

    - by Alexander Kuznetsov
    Even if two processes compete on only one resource, they still can embrace in a deadlock. The following scripts reproduce such a scenario. In one tab, run this: CREATE TABLE dbo.Test ( i INT ) ; GO INSERT INTO dbo.Test ( i ) VALUES ( 1 ) ; GO SET TRANSACTION ISOLATION LEVEL SERIALIZABLE ; BEGIN TRAN SELECT i FROM dbo.Test ; --UPDATE dbo.Test SET i=2 ; After this script has completed, we have an outstanding transaction holding a shared lock. In another tab, let us have that another connection have...(read more)

    Read the article

  • Dell whitepaper on PowerEdge R810 R910 and M910 Memory Architecture

    - by jchang
    The Dell PowerEdge 11 th Generation Servers: R810, R910 and M910 Memory Guidance whitepaper seems to have caused some confusion. I believe the source is an error in the paper. In the section on FlexMem Bridge Technology, the Dell whitepaper says this applies to the R810 and the M910. The Dell M910 is a 4-way blade server for the Xeon 7500 series processor line. First a breif recap. The R810 is a 2-way server, by which I mean it has two sockets regardless of the number of cores on each processor....(read more)

    Read the article

  • How views are changing in future versions of SQL

    - by Rob Farley
    April is here, and this weekend, SQL v11.0 (previous known as Denali, now known as SQL Server 2012) reaches general availability. And so I thought I’d share some news about what’s coming next. I didn’t hear this at the MVP Summit earlier this year (where there was lots of NDA information given, but I didn’t go), so I think I’m free to share it. I’ve written before about CTEs being query-scoped views. Well, the actual story goes a bit further, and will continue to develop in future versions. A CTE is a like a “temporary temporary view”, scoped to a single query. Due to globally-scoped temporary objects using a two-hashes naming style, and session-scoped (or ‘local’) temporary objects a one-hash naming style, this query-scoped temporary object uses a cunning zero-hash naming style. We see this implied in Books Online in the CREATE TABLE page, but as we know, temporary views are not yet supported in the SQL Server. However, in a breakaway from ANSI-SQL, Microsoft is moving towards consistency with their naming. We know that a CTE is a “common table expression” – this is proving to be a more strategic than you may have appreciated. Within the Microsoft product group, the term “Table Expression” is far more widely used than just CTEs. Anything that can be used in a FROM clause is referred to as a Table Expression, so long as it doesn’t actually store data (which would make it a Table, rather than a Table Expression). You can see this is not just restricted to the product group by doing an internet search for how the term is used without ‘common’. In the past, Books Online has referred to a view as a “virtual table” (but notice that there is no SQL 2012 version of this page). However, it was generally decided that “virtual table” was a poor name because it wasn’t completely accurate, and it’s typically accepted that virtualisation and SQL is frowned upon. That page I linked to says “or stored query”, which is slightly better, but when the SQL 2012 version of that page is actually published, the line will be changed to read: “A view is a stored table expression (STE)”. This change will be the first of many. During the SQL 2012 R2 release, the keyword VIEW will become deprecated (this will be SQL v11 SP1.5). Three versions later, in SQL 14.5, you will need to be in compatibility mode 140 to allow “CREATE VIEW” to work. Also consistent with Microsoft’s deprecation policy, the execution of any query that refers to an object created as a view (rather than the new “CREATE STE”), will cause a Deprecation Event to fire. This will all be in preparation for the introduction of Single-Column Table Expressions (to be introduced in SQL 17.3 SP6) which will finally shut up those people waiting for a decent implementation of Inline Scalar Functions. And of course, CTEs are “Common” because the Table Expression definition needs to be repeated over and over throughout a stored procedure. ...or so I think I heard at some point. Oh, and congratulations to all the new MVPs on this April 1st. @rob_farley

    Read the article

  • Cumulative Update #8 for SQL Server 2008 SP3 is available

    - by AaronBertrand
    Today Microsoft has released a new cumulative update for SQL Server 2008 SP3. KB article: KB #2771833 There are 9 fixes listed at the time of writing The build number is 10.00.5828.00 Relevant for @@VERSION between 10.00.5500 and 10.00.5827 It seems clear that Service Pack 2 servicing has been discontinued. So there is even less reason to hold onto those old builds, and every reason to upgrade to Service Pack 3 . As usual, I'll post my standard disclaimer here: these updates are NOT for SQL Server...(read more)

    Read the article

  • SQL Community – stronger than ever

    - by Rob Farley
    I posted a few hours ago about a reflection of the Summit, but I wanted to write another one for this month’s T-SQL Tuesday, hosted by Chris Yates. In January of this year, Adam Jorgensen and I joked around in a video that was used for the SQL Server 2012 launch. We were asked about SQLFamily, and we said how we were like brothers – how we could drive each other crazy (the look he gave me as I patted his stomach was priceless), but that we’d still look out for each other, just like in a real family. And this is really true. Last week at the PASS Summit, there was a lot going on. I was busy as always, as were many others. People told me their good news, their awful news, and some whinged to me about other people who were driving them crazy. But throughout this, people in the SQL Server community genuinely want the best for each other. I’m sure there are exceptions, but I don’t see much of this. Australians aren’t big on cheering for each other. Neither are the English. I think we see it as an American thing. It could be easy for me to consider that the SQL Community that I see at the PASS Summit is mainly there because it’s a primarily American organisation. But when you speak to people like sponsors, or people involved in several types of communities, you quickly hear that it’s not just about that – that PASS has something special. It goes beyond cheering, it’s a strong desire to see each other succeed. I see MVPs feel disappointed for those people who don’t get awarded. I see Summit speakers concerned for those who missed out on the chance to speak. I see chapter leaders excited about the opportunity to help other chapters. And throughout, I see a gentleness and love for people that you rarely see outside the church (and sadly, many churches don’t have it either). Chris points out that the M-W dictionary defined community as “a unified body of individuals”, and I feel like this is true of the SQL Server community. It goes deeper though. It’s not just unity – and we’re most definitely different to each other – it’s more than that. We all want to see each other grow. We all want to pull ourselves up, to serve each other, and to grow PASS into something more than it is today. In that other post of mine I wrote a bit about Paul White’s experience at his first Summit. His missus wrote to me on Facebook saying that she welled up over it. But that emotion was nothing about what I wrote – it was about the reaction that the SQL Community had had to Paul. Be proud of it, my SQL brothers and sisters, and never lose it.

    Read the article

  • Dynamic Ranking with Excel and PowerPivot

    - by AlbertoFerrari
    Ranking is useful and, in our book , I and Marco provide a lot of information about how to perform ranking with PowerPivot. Nevertheless, there is an interesting scenario where ranking can be performed without complex DAX formulas, but with just some creative Excel usage. I would like to describe it here. Let us start with some words about the scenario: we want to rank products based on sales in a year (e.g. 2002) and see how the top 10 of these products performed in the following or preceding years....(read more)

    Read the article

  • Have You Heard About the Microsoft TechNet Wiki?

    - by KKline
    Here's another one to add to your list of browser bookmarks! The TechNet Wiki covers Microsoft technologies from writers throughout the community for use by the community. As with all wikis, this grassroots effort needs your help. Microsoft is encouraging everyone to contribute the effort - all you have to do is join. So start a whole new article, add your knowledge or draw from your experience to improve an existing article. You can start small or large... Join in at http://social.technet.microsoft.com/wiki/...(read more)

    Read the article

  • SQL2K8R2: StreamInsight changes at RTM: Hopping Windows

    - by Greg Low
    We've been working on updating our demos and samples for the RTM changes of StreamInsight. I'll detail these as I come across them. The first is that there is a change to the HoppingWindow. The first two parameters are the same in the constructor but the third parameter is now required. It is the HoppingWindowOutputPolicy. Currently, there is only a single option for this which is ClipToWindowEnd. So you can create a HoppingWindow like this: var queryOutput = from w in input.HoppingWindow ( TimeSpan...(read more)

    Read the article

  • Cloud Computing - just get started already!

    - by BuckWoody
    OK - you've been hearing about "cloud" (I really dislike that term, but whatever) for over two years. You've equated it with just throwing some VM's in some vendor's datacenter - which is certainly part of it, but not the whole story. There's a whole world of - wait for it - *coding* out there that you should be working on. If you're a developer, this is just a set of servers with operating systems and the runtime layer (like.NET, Java, PHP, etc.) that you can deploy code to and have it run. It can expand in a horizontal way, allowing massive - and I really, honestly mean massive, not just marketing talk kind of scale. We see this every day. If you're not a developer, well, now's the time to learn. Explore a little. Try it. We'll help you. There's a free conference you can attend in November, and you can sign up for it now. It's all on-line, and the tools you need to code are free. Put down Facebook and Twitter for a minute - go sign up. Learn. Do. :) See you there. http://www.windowsazureconf.net/

    Read the article

  • When someone deletes a shared data source in SSRS

    - by Rob Farley
    SQL Server Reporting Services plays nicely. You can have things in the catalogue that get shared. You can have Reports that have Links, Datasets that can be used across different reports, and Data Sources that can be used in a variety of ways too. So if you find that someone has deleted a shared data source, you potentially have a bit of a horror story going on. And this works for this month’s T-SQL Tuesday theme, hosted by Nick Haslam, who wants to hear about horror stories. I don’t write about LobsterPot client horror stories, so I’m writing about a situation that a fellow MVP friend asked me about recently instead. The best thing to do is to grab a recent backup of the ReportServer database, restore it somewhere, and figure out what’s changed. But of course, this isn’t always possible. And it’s much nicer to help someone with this kind of thing, rather than to be trying to fix it yourself when you’ve just deleted the wrong data source. Unfortunately, it lets you delete data sources, without trying to scream that the data source is shared across over 400 reports in over 100 folders, as was the case for my friend’s colleague. So, suddenly there’s a big problem – lots of reports are failing, and the time to turn it around is small. You probably know which data source has been deleted, but getting the shared data source back isn’t the hard part (that’s just a connection string really). The nasty bit is all the re-mapping, to get those 400 reports working again. I know from exploring this kind of stuff in the past that the ReportServer database (using its default name) has a table called dbo.Catalog to represent the catalogue, and that Reports are stored here. However, the information about what data sources these deployed reports are configured to use is stored in a different table, dbo.DataSource. You could be forgiven for thinking that shared data sources would live in this table, but they don’t – they’re catalogue items just like the reports. Let’s have a look at the structure of these two tables (although if you’re reading this because you have a disaster, feel free to skim past). Frustratingly, there doesn’t seem to be a Books Online page for this information, sorry about that. I’m also not going to look at all the columns, just ones that I find interesting enough to mention, and that are related to the problem at hand. These fields are consistent all the way through to SQL Server 2012 – there doesn’t seem to have been any changes here for quite a while. dbo.Catalog The Primary Key is ItemID. It’s a uniqueidentifier. I’m not going to comment any more on that. A minor nice point about using GUIDs in unfamiliar databases is that you can more easily figure out what’s what. But foreign keys are for that too… Path, Name and ParentID tell you where in the folder structure the item lives. Path isn’t actually required – you could’ve done recursive queries to get there. But as that would be quite painful, I’m more than happy for the Path column to be there. Path contains the Name as well, incidentally. Type tells you what kind of item it is. Some examples are 1 for a folder and 2 a report. 4 is linked reports, 5 is a data source, 6 is a report model. I forget the others for now (but feel free to put a comment giving the full list if you know it). Content is an image field, remembering that image doesn’t necessarily store images – these days we’d rather use varbinary(max), but even in SQL Server 2012, this field is still image. It stores the actual item definition in binary form, whether it’s actually an image, a report, whatever. LinkSourceID is used for Linked Reports, and has a self-referencing foreign key (allowing NULL, of course) back to ItemID. Parameter is an ntext field containing XML for the parameters of the report. Not sure why this couldn’t be a separate table, but I guess that’s just the way it goes. This field gets changed when the default parameters get changed in Report Manager. There is nothing in dbo.Catalog that describes the actual data sources that the report uses. The default data sources would be part of the Content field, as they are defined in the RDL, but when you deploy reports, you typically choose to NOT replace the data sources. Anyway, they’re not in this table. Maybe it was already considered a bit wide to throw in another ntext field, I’m not sure. They’re in dbo.DataSource instead. dbo.DataSource The Primary key is DSID. Yes it’s a uniqueidentifier... ItemID is a foreign key reference back to dbo.Catalog Fields such as ConnectionString, Prompt, UserName and Password do what they say on the tin, storing information about how to connect to the particular source in question. Link is a uniqueidentifier, which refers back to dbo.Catalog. This is used when a data source within a report refers back to a shared data source, rather than embedding the connection information itself. You’d think this should be enforced by foreign key, but it’s not. It does allow NULLs though. Flags this is an int, and I’ll come back to this. When a Data Source gets deleted out of dbo.Catalog, you might assume that it would be disallowed if there are references to it from dbo.DataSource. Well, you’d be wrong. And not because of the lack of a foreign key either. Deleting anything from the catalogue is done by calling a stored procedure called dbo.DeleteObject. You can look at the definition in there – it feels very much like the kind of Delete stored procedures that many people write, the kind of thing that means they don’t need to worry about allowing cascading deletes with foreign keys – because the stored procedure does the lot. Except that it doesn’t quite do that. If it deleted everything on a cascading delete, we’d’ve lost all the data sources as configured in dbo.DataSource, and that would be bad. This is fine if the ItemID from dbo.DataSource hooks in – if the report is being deleted. But if a shared data source is being deleted, you don’t want to lose the existence of the data source from the report. So it sets it to NULL, and it marks it as invalid. We see this code in that stored procedure. UPDATE [DataSource]    SET       [Flags] = [Flags] & 0x7FFFFFFD, -- broken link       [Link] = NULL FROM    [Catalog] AS C    INNER JOIN [DataSource] AS DS ON C.[ItemID] = DS.[Link] WHERE    (C.Path = @Path OR C.Path LIKE @Prefix ESCAPE '*') Unfortunately there’s no semi-colon on the end (but I’d rather they fix the ntext and image types first), and don’t get me started about using the table name in the UPDATE clause (it should use the alias DS). But there is a nice comment about what’s going on with the Flags field. What I’d LIKE it to do would be to set the connection information to a report-embedded copy of the connection information that’s in the shared data source, the one that’s about to be deleted. I understand that this would cause someone to lose the benefit of having the data sources configured in a central point, but I’d say that’s probably still slightly better than LOSING THE INFORMATION COMPLETELY. Sorry, rant over. I should log a Connect item – I’ll put that on my todo list. So it sets the Link field to NULL, and marks the Flags to tell you they’re broken. So this is your clue to fixing it. A bitwise AND with 0x7FFFFFFD is basically stripping out the ‘2’ bit from a number. So numbers like 2, 3, 6, 7, 10, 11, etc, whose binary representation ends in either 11 or 10 get turned into 0, 1, 4, 5, 8, 9, etc. We can test for it using a WHERE clause that matches the SET clause we’ve just used. I’d also recommend checking for Link being NULL and also having no ConnectionString. And join back to dbo.Catalog to get the path (including the name) of broken reports are – in case you get a surprise from a different data source being broken in the past. SELECT c.Path, ds.Name FROM dbo.[DataSource] AS ds JOIN dbo.[Catalog] AS c ON c.ItemID = ds.ItemID WHERE ds.[Flags] = ds.[Flags] & 0x7FFFFFFD AND ds.[Link] IS NULL AND ds.[ConnectionString] IS NULL; When I just ran this on my own machine, having deleted a data source to check my code, I noticed a Report Model in the list as well – so if you had thought it was just going to be reports that were broken, you’d be forgetting something. So to fix those reports, get your new data source created in the catalogue, and then find its ItemID by querying Catalog, using Path and Name to find it. And then use this value to fix them up. To fix the Flags field, just add 2. I prefer to use bitwise OR which should do the same. Use the OUTPUT clause to get a copy of the DSIDs of the ones you’re changing, just in case you need to revert something later after testing (doing it all in a transaction won’t help, because you’ll just lock out the table, stopping you from testing anything). UPDATE ds SET [Flags] = [Flags] | 2, [Link] = '3AE31CBA-BDB4-4FD1-94F4-580B7FAB939D' /*Insert your own GUID*/ OUTPUT deleted.Name, deleted.DSID, deleted.ItemID, deleted.Flags FROM dbo.[DataSource] AS ds JOIN dbo.[Catalog] AS c ON c.ItemID = ds.ItemID WHERE ds.[Flags] = ds.[Flags] & 0x7FFFFFFD AND ds.[Link] IS NULL AND ds.[ConnectionString] IS NULL; But please be careful. Your mileage may vary. And there’s no reason why 400-odd broken reports needs to be quite the nightmare that it could be. Really, it should be less than five minutes. @rob_farley

    Read the article

  • Common request: export #Tabular model and data to #PowerPivot

    - by Marco Russo (SQLBI)
    I received this request in many courses, messages and also forum discussions: having an Analysis Services Tabular model, it would be nice being able to extract a correspondent PowerPivot data model. In order of priority, here are the specific feature people (including me) would like to see: Create an empty PowerPivot workbook with the same data model of a Tabular model Change the connections of the tables in the PowerPivot workbook extracting data from the Tabular data model Every table should have an EVALUATE ‘TableName’ query in DAX Apply a filter to data extracted from every table For example, you might want to extract all data for a single country or year or customer group Using the same technique of applying filter used for role based security would be nice Expose an API to automate the process of creating a PowerPivot workbook Use case: prepare one workbook for every employee containing only its data, that he can use offline Common request for salespeople who want a mini-BI tool to use in front of the customer/lead/supplier, regardless of a connection available This feature would increase the adoption of PowerPivot and Tabular (and, therefore, Business Intelligence licenses instead of Standard), and would probably raise the sales of Office 2013 / Office 365 driven by ISV, who are the companies who requests this feature more. If Microsoft would do this, it would be acceptable it only works on Office 2013. But if a third-party will do that, it will make sense (for their revenues) to cover both Excel 2010 and Excel 2013. Another important reason for this feature is that the “Offline cube” feature that you have in Excel is not available when your PivotTable is connected to a Tabular model, but it can only be used when you connect to Analysis Services Multidimensional. If you think this is an important features, you can vote this Connect item.

    Read the article

  • Ola Hallengren adds STATISTICS support to his solution

    - by AaronBertrand
    Last week, Ola published a very useful update to his Backup, Integrity Check and Index Optimization scripts : the solution now supports updating statistics. There are several options, such as only updating when the data has been modified and using the RESAMPLE and NORECOMPUTE options. An example call: EXEC dbo.IndexOptimize @Databases = 'USER_DATABASES' , @FragmentationHigh_LOB = 'INDEX_REBUILD_OFFLINE' , @FragmentationHigh_NonLOB = 'INDEX_REBUILD_ONLINE' , @FragmentationMedium_LOB = 'INDEX_REORGANIZE_STATISTICS_UPDATE'...(read more)

    Read the article

  • Creating a Corporate Data Hub

    - by BuckWoody
    The Windows Azure Marketplace has a rich assortment of data and software offerings for you to use – a type of Software as a Service (SaaS) for IT workers, not necessarily for end-users. Among those offerings is the “Data Hub” – a  codename for a project that ironically actually does what the codename says. In many of our organizations, we have multiple data quality issues. Finding data is one problem, but finding it just once is often a bigger problem. Lots of departments and even individuals have stored the same data more than once, and in some cases, made changes to one of the copies. It’s difficult to know which location or version of the data is authoritative. Then there’s the problem of accessing the data. It’s fairly straightforward to publish a database, share or other location internally to store the data. But then you have to figure out who owns it, how it is controlled, and pass out the various connection strings to those who want to use it. And then you need to figure out how to let folks access the internal data externally – bringing up all kinds of security issues. Finally, in many cases our user community wants us to combine data from the internally sources with external data, bringing up the security, strings, and exploration features up all over again. Enter the Data Hub. This is an online offering, where you assign an administrator and data stewards. You import the data into the service, and it’s available to you - and only you and your organization if you wish. The basic steps for this service are to set up the portal for your company, assign administrators and permissions, and then you assign data areas and import data into them. From there you make them discoverable, and then you have multiple options that you or your users can access that data. You’re then able, if you wish, to combine that data with other data in one location. So how does all that work? What about security? Is it really that easy? And can you really move the data definition off to the Subject Matter Experts (SME’s) that know the particular data stack better than the IT team does? Well, nothing good is easy – but using the Data Hub is actually pretty simple. I’ll give you a link in a moment where you can sign up and try this yourself. Once you sign up, you assign an administrator. From there you’ll create data areas, and then use a simple interface to bring the data in. All of this is done in a portal interface – nothing to install, configure, update or manage. After the data is entered in, and you’ve assigned meta-data to describe it, your users have multiple options to access it. They can simply use the portal – which actually has powerful visualizations you can use on any platform, even mobile phones or tablets.     Your users can also hit the data with Excel – which gives them ultimate flexibility for display, all while using an authoritative, single reference for the data. Since the service is online, they can do this wherever they are – given the proper authentication and permissions. You can also hit the service with simple API calls, like this one from C#: http://msdn.microsoft.com/en-us/library/hh921924  You can make HTTP calls instead of code, and the data can even be exposed as an OData Feed. As you can see, there are a lot of options. You can check out the offering here: http://www.microsoft.com/en-us/sqlazurelabs/labs/data-hub.aspx and you can read the documentation here: http://msdn.microsoft.com/en-us/library/hh921938

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >