Search Results

Search found 15089 results on 604 pages for 'jeff home'.

Page 108/604 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Virtualization in Ubuntu 9.10

  - by Jeff Dege

  I have an existing Centos 5 installation. I would like to upgrade to Ubuntu. Thing is, I don't want to be down for as long as it will take to get my entire environment moved over - software installed, connectivity configured, etc. I'd like to take it one step at a time. But I don't really want to keep rebooting back and forth from the new OS to the old OS. That's what I did last time I upgraded to a new OS, and it got old real fast. So, since my new MB is virtualization-ready (AMD Phenom II 945 quad-core), I figured I could create a virtual machine, under the new OS installation, that ran the old OS installation. The problem is that the documentation I've been able to find has been pretty sparse. I've found a lot of possibilities, and little info on which would be capable of doing what I want. I have a new Ubuntu 9.10 installation, and a second disk containing the Centos 5 installation. And I don't know where to go next. Any help would be appreciated.

  Read the article

• ArchBeat Link-o-Rama for December 7, 2012

  - by Bob Rhubart

  From XaaS to Java EE – Which damn cloud is right for me in 2012? | Markus Eisele Oracle ACE Director Markus Eisele wrestles with a timely technical issue and shares his observations on several of the alternatives. WebLogic Servier Domain Browser App (Android) My colleague Jeff Davies, a frequent speaker at OTN Architect Day events and a genuinely nice guy, emailed me last night with this message: "I just came across this app on Google Play. It allows WebLogic administrators to browse WLS 12c domain information. I installed it on my phone and tried it out. Works very fast." I'm an iPhone guy, but I'm perfectly comfortable taking Jeff at his word.The app is called WLS Domain Browser. Follow the link for more info from the Google Play site. Exalogic 2.0.1 Tea Break Snippets - Creating a ModifyJeOS VirtualBox | The Old Toxophilist "One of the main advantages of this is that Templates can be created away from the Exalogic Environment," explains The Old Toxophilist. BTW: I had to look it up: a toxophilist is one who collects bows and arrows. Thought for the Day "All models are wrong; some models are useful." — George Box Source: SoftwareQuotes.com

  Read the article

• Blocking IP address with port forwarding

  - by Jeff Storey

  I have a website setup behind a router, so the router has the external facing address and it will forward requests to the webserver inside the network. If there are X number of invalid login attempts, that IP address will be blocked from logging in. The problem is that because the site is being accessed through port forwarding, all requests show up as though they are coming from the router address, and thus the router address becomes the blocked IP. I'm not sure if this is a limitation of the router (linksys wrt160n) or if this a more general issue. Is there a way to handle this?

  Read the article

• How do I update my servers' domain name for Reverse DNS?

  - by Jeff

  I'm updating my mail servers' rDNS and I think I have it all figured out except for one thing. When I installed my OS (Debian Etch), the installer asked me to enter the "domain name". Is the "domain name" updated by using the hostname command? If so, which config file(s) are updated when using the hostname command? If not, how do I change my servers' domain name? My current /etc/hosts: 127.0.0.1 localhost 67.228.178.164 mrspock.example-old.com mrspock My current /etc/hostname: mrspock $ hostname -f mrspock.example-old.com I need to update hostname -f to be mrspock.example-new.com.

  Read the article

• Ubuntu SSH issue

  - by palani

  0 Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

  Read the article

• Ubuntu SSH issue

  - by palani

  Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

  Read the article

• password protect apache user directory using system passwords

  - by Jeff

  I have set up Apache to check user passwords using these modules: LoadModule authz_user_module modules/mod_authz_user.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule auth_basic_module modules/mod_auth_basic.so However, these modules require me to manually add everyone to a new password file (which requires every user to type in their password). Is there a way to have Apache check the system passwords, so that anyone who can ssh can use the same password for web login?

  Read the article

• How do I prevent a tar pipe from causing swapping?

  - by Jeff Shattock

  I have a rather large filesystem that I need to transfer from one Linux server to another. I figured the best way to do this was via a tar/netcat pipe arrangment, something like tar c . | pv | nc blah blah blah And it works great, the network stays fairly saturated, life is good. Until the source machine starts swapping. The files are on a raid on the source system, so the read speed is much faster than the write speed on the other end. Since the dest machine hasnt picked up the data yet, the source machine needs to stick it somewhere, so into RAM it goes, until there is no more free RAM. It then starts swapping, which is horribly painful since that machine has its OS installed on a somewhat slow CF card. Both machines have 4GB of physical ram, 64 bit Ubuntu 9.04 server. GigE link between them. How do I prevent this swapping? Can I put a "speed-limit" on the tar or netcat process so that the transfer speed doesn't overwhelm the write throughput on the destination end? The man pages didn't list anything, but there might be something I'm overlooking.

  Read the article

• emails getting sent with wrong "from" address

  - by Errol Gongson

  I have a postfix/dovecot system setup on Ubuntu 10.04, and it sends/receives emails fine, but when I send emails they are all from [email protected]. For example, I have a user called "info" and when I try to send an email using mutt from this Mailbox "/home/vmail/mydomain.com/info/Maildir" the email will send find but it will be from "[email protected]" and not "[email protected]". I have 3 mailboxes (/home/vmail/mydomain.com/root/Maildir, /home/vmail/mydomain.com/root/postmaster, and /home/vmail/mydomain.com/root/info) and they all send and receive emails. I am new to postfix and dovecot... can someone who knows what they are doing help me out on this one?? 30 myhostname = mail.mydomain.com 31 alias_maps = hash:/etc/aliases 32 alias_database = hash:/etc/aliases 33 myorigin = mydomain.com #have tried setting myorigin = mail.mydomain.com and still same problem 34 mydestination = mail.mydomain.com, localhost, localhost.localdomain 35 relayhost = 36 mynetworks = 127.0.0.0/8 37 mailbox_size_limit = 0 38 recipient_delimiter = + 39 inet_interfaces = all 40 html_directory = /usr/share/doc/postfix/html 41 message_size_limit = 30720000 42 virtual_alias_domains = This is from the aliases file postmaster: root root: [email protected]

  Read the article

• Using Different Networks with Different Proxy Servers on Windows 7

  - by John

  Hi, I have a laptop running Windows 7 Professional. There are two wireless networks I connect to every day: Home: no proxy server Work: proxy server with authentication On my iPad and iPhone, I've got two WiFi network profiles (one for home, one for work). The work one has the proxy server settings specified. The home one has no proxy specified. It all works great and I don't need to go changing settings around whenever I move from home to work or vice versa. On my laptop, however, I can't seem to get this going. I can certainly connect to both networks, but when I'm at work I have to go and change the proxy settings (in Internet Options) to be able to use the network. When I'm at home, I have to then go and turn them off. It's a small thing, but considering this is something I have to do every day, it's a bit annoying. Is there any way I can make Windows automatically switch proxy settings on or off based on the network I'm connected to? Thanks, John

  Read the article

• Troubleshooting an overheating CPU

  - by Jeff Fry

  I & my father just recently put together a new PC. Specs below. From the very beginning, on boot it will often complain that the CPU is too hot. If I sit in BIOS and watch the CPU, it'll drop back down from red to blue (<72C), at which point I've tended to just boot into Windows...and haven't had any problems. In fact, I've played a couple hours straight of Skyrim at max settings, and not had any visible issues. That said, I've occasionally walked away & come back to find that it's crashed. Yesterday, it crashed (while idle) twice in 12 hours, which shifted the balance from busy-with-life to nervous-I'm-about-to-melt-something. I just installed Core Temp which is showing my 4 cores fluxuating between 70-98C. I'm guessing at this point that the CPU fan may be incorrectly installed or defective. My first thought is to either (a) add water cooling (which the case supports) and / or (b) replace the CPU fan with an after-market one. That said, I'm very open to suggestions. A note, while I certainly don't want to burn money here, I have a baby coming any day now and am still unpacking from a recent move so if I have a choice between an option that costs money and another that takes a while...I'll happily spend a bit extra. Side question: Should I be nervous to even have this on at this point? Let me know if there's something useful I could add to my report. Otherwise, I'm looking forward to your suggestions! Thanks. CPU Intel i7-2600 CPU w/ stock fan Other HW ASUS P8Z68-V Pro motherboard 64G SSD boot drive 4 older SATA HDs GIGABYTE ATI Radeon HD6950 1 GB DDR5 8G Kingston T1 Series RAM Corsair 650W Gold Certified power supply Antec P280 case

  Read the article

• Virtual OS using same Wallpaper as Host

  - by Jeff

  Greetings, I'm running a guest Linux OS on top of Windows XP, which rotates its wallpapers using the PowerToy Wallpaper Changer. I'm hoping for a way for my guest OS to somehow detect which wallpaper the host is using, and automatically switch to it. Why? Because if I run my guest OS in seamless mode and have transparent windows, I want the transparent background to match the host OS. It looks nice that way :). A couple tidbits of relevant information: Guest OS is Peppermint Ice (Ubuntu based) Host OS is Windows XP VirtualBox as virtualization software I realize this is somewhat breaking borders between the host and the guest, but I want my pretty rotating wallpaper! I'm guessing there is a way using scripts and shared folders or something similar, if not by means of just querying the host OS.

  Read the article

• mod_fcgi produces random 500 Errors

  - by DmitrySemenov

  php 5.4.7 via mod_fcgi when I run the site sometimes it works, sometimes it crashed with 500 Internal Error, this is what I see in error.log everytime I run the script [Mon Sep 24 18:50:43 2012] [warn] [client 68.231.194.198] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Mon Sep 24 18:50:43 2012] [error] [client 68.231.194.198] Premature end of script headers: api.php any ideas? vhost config: <VirtualHost :80> ServerAdmin [email protected] DocumentRoot "/home/www/sites/test.com/html/development" ServerName test.com ServerAlias www.test.com ErrorLog "/home/www/sites/test.com/logs/error_log" CustomLog "/home/www/sites/test.com/logs/access_log" common <IfModule mod_fcgid.c> <Directory /home/www/sites/test.com/html/development> Options +ExecCGI AllowOverride All AddHandler fcgid-script .php FCGIWrapper /home/www/php-fcgi-scripts/php-fcgi-starter .php Order allow,deny Allow from all </Directory> FcgidMaxRequestLen 1073741824 </VirtualHost> fcgi.d conf LoadModule fcgid_module modules/mod_fcgid.so # Use FastCGI to process .fcg .fcgi & .fpl scripts AddHandler fcgid-script fcg fcgi fpl # Sane place to put sockets and shared memory file FcgidIPCDir /var/run/mod_fcgid FcgidProcessTableFile /var/run/mod_fcgid/fcgid_shm IdleTimeout 300 BusyTimeout 300 ProcessLifeTime 7200 IPCConnectTimeout 300 IPCCommTimeout 7200 PHP_Fix_Pathinfo_Enable 1 php-fcgi-starter.php #!/bin/sh PHP_CGI=/usr/local/php547/bin/php-cgi PHP_INI=/etc/php547-fastcgi.ini export PHP_FCGI_TIMEOUT=1200 #export PHP_FCGI_CHILDREN=6 export PHP_FCGI_MAX_REQUESTS=1000 exec $PHP_CGI -c $PHP_INI

  Read the article

• Broadcom HT1100 SATA controller not working properly with 1TB drives

  - by Jeff C

  I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

  Read the article

• Best way to compare (diff) a full directory structure?

  - by Adam Matan

  Hi, What's the best way to compare directory structures? I have a backup utility which uses rsync. I want to tell the exact differences (in terms of file sizes and last-changed dates) between the source and the backup. Something like: Local file Remote file Compare /home/udi/1.txt (date)(size) /home/udi/1.txt (date)(size) EQUAL /home/udi/2.txt (date)(size) /home/udi/2.txt (date)(size) DIFFERENT Of course, the tool can be ready-made or an idea for a python script. Many thanks! Udi

  Read the article

• ASA 5505 Vlan question

  - by Wayne

  I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1<br> nameif inside<br> security-level 100<br> ip address 192.168.110.254 255.255.255.0 <br> !<br> interface Vlan2<br> nameif outside<br> security-level 0<br> pppoe client vpdn group birdie<br> ip address removedIP 255.255.255.255 pppoe <br> !<br> interface Vlan3<br> no forward interface Vlan1<br> nameif home<br> security-level 50<br> ip address 192.168.7.1 255.255.255.0 <br> ! <br> interface Ethernet0/0<br> switchport access vlan 2<br> ! <br> interface Ethernet0/1<br> ! <br> interface Ethernet0/2<br> ! <br> interface Ethernet0/3<br> ! <br> interface Ethernet0/4<br> switchport access vlan 3<br> ! <br> interface Ethernet0/5<br> shutdown <br> ! <br> interface Ethernet0/6<br> shutdown <br> ! <br> interface Ethernet0/7<br> shutdown <br> ! <br> ftp mode passive<br> clock timezone EST -5<br> clock summer-time EDT recurring<br> access-list Outside-In extended permit icmp any any <br> access-list Outside-In extended permit tcp any any eq www <br> access-list Outside-In extended permit tcp any any eq https <br> access-list Outside-In extended permit tcp any any eq 5969 <br> access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 <br>any access-list inside_in extended permit icmp any any <br> access-list inside_in extended permit ip any any <br> access-list home_in extended permit icmp any any <br> access-list home_in extended permit ip any any <br> pager lines 24<br> logging enable<br> logging asdm informational<br> mtu inside 1492<br> mtu outside 1492<br> mtu home 1500 <br> ip local pool vpnuser 192.168.111.5-192.168.111.20<br> icmp unreachable rate-limit 1 burst-size 1<br> asdm image disk0:/asdm-524.bin<br> no asdm history enable<br> arp timeout 14400<br> nat-control <br> global (outside) 1 interface<br> nat (inside) 0 access-list inside_nat0_outbound<br> nat (inside) 1 0.0.0.0 0.0.0.0<br> nat (home) 1 192.168.7.0 255.255.255.0<br> static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 <br> static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 <br> static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 <br> static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 <br> access-group inside_in in interface inside<br> access-group Outside-In in interface outside<br> access-group home_in in interface home<br> route outside 0.0.0.0 0.0.0.0 RemovedIP 1<br>

  Read the article

• Windows Firewall rule based on domain name instead of IP

  - by DennyDotNet

  I'm trying to allow a service to a set of machines via Windows Firewall. I'd like to add my home machine to the firewall but my home machine has a dynamic ip address. I use dyndns so that I have a hostname which I can always connect to. So I'm trying to see if there is a way I can use my hostname instead of an IP. Thanks Update Let me add a little more information, perhaps there are other ways to resolve my issue. The server is a web server hosted by RackSpace. I only want to allow RDP access from my work (static IP, so no problem) and home (dynamic). My home IP doesn't change too often, just often enough to annoy me. So maybe there is a better way to do this... maybe VPN?

  Read the article

• Play framework 2.2 using Upstart 1.5 (Ubuntu 12.04)

  - by Leon Radley

  I'm trying to get Play 2.2 working with upstart. I've been running Play 2.x with upstart since it's release and it's never been a problem. But since the release of 2.2 and the change to http://www.scala-sbt.org/sbt-native-packager/ play doesn't want to start any more. Here's the config I'm using description "PlayFramework 2.2" version "2.2" env APP=myapp env USER=myuser env GROUP=www-data env HOME=/home/myuser/app env PORT=9000 env ADDRESS=127.0.0.1 env CONFIG=production.conf env JAVAOPTS="-J-Xms128M -J-Xmx512m -J-server" start on runlevel [2345] stop on runlevel [06] respawn respawn limit 10 5 expect daemon # If you want the upstart script to build play with sbt pre-start script chdir $HOME sbt clean compile stage -mem $SBTMEM end script exec start-stop-daemon --pidfile ${HOME}/RUNNING_PID --chuid $USER:$GROUP --exec ${HOME}/bin/${APP} --background --start -- -Dconfig.resource=$CONFIG -Dhttp.address=$ADDRESS -Dhttp.port=$PORT $JAVAOPTS I've changed the JAVAOPTS to include the -J- and I've also changed the path to use the new startscript located in the /bin/ dir. I've read that upstart 1.4 has setuid and setguid. I've tried removing the start-stop-daemon but I haven't got that working either. Any suggestions would be appreciated.

  Read the article

• How to back up vhd?

  - by jeff waldey

  HOW to back up a vhd automatically ? Is there any tool which I can set up ? Thanks.

  Read the article

• Sneak Preview - New CodePlex UI

  We have been busy the last several months working to improve the overall experience for the CodePlex community. We have been working through some of the top requested items, such as our big announcement last week enabling Git. Something that is not explicitly on the feature request list are requests to update the web site look and user experience.  As Brian Harry mentioned, the Future of CodePlex is Bright, so it is time to start brightening up the place. Goals As with any sizeable change you need to decide the scope of changes you want to tackle. We decided that we would optimize on incremental improvements verses taking months to get a completely new experience released. Our goals with this user experience work is to refresh the look and feel of the site, introduce new visual elements and set up the site for future structural changes. So this is not the end, just the beginning. Early Views I want to set a few expectations first, these screen shots are not final, and we are still working through the content and final element placement. Feedback is always welcome, just take that in mind as you review the images. New CodePlex Home The navigation changed a good bit on the home page and we have moved the search to a more consistent location across the site.   User Profile Users Home Page The goal was to make it easier to find and take action on common tasks such as creating projects. Project Home Issue Tracker   This should give you a taste of where we are going with the new user experience.     As always we love the feedback, either comment below, find us on Twitter @codeplex or @mgroves84, or create or vote up suggestions.

  Read the article

• nginx public webdav server

  - by Gert Cuykens

  Can you check the user group from a $remote_user? location ~ ^/home/(.*)$ { alias /home/$remote_user/$1; auth_pam "Restricted"; auth_pam_service_name "nginx"; dav_methods PUT DELETE MKCOL COPY MOVE; dav_access group:rw all:r; create_full_put_path on; } location ~ ^/get/(.*)$ { alias /home/$1; #check the group of the $remote_user; } curl -T test.txt 'http://gert:[email protected]/home/' curl 'http://friend:[email protected]/get/gert/test.txt'

  Read the article

• Best DSL hardware for ADSL Troubleshooting

  - by Jeff Sacksteder

  I have a situation where I need to make the best of a bad DSL situation. The CPE is a black box with no access to DSL diagnostics. My plan is to get some sort of DSL hardware that exposes link-layer state and gives me knobs to tweak. I'd like to be able to mitigate bufferbloat as much as I can while I'm at it. The obvious choice would seem to be a Sangoma card in a linux system. I have no way of knowing if that will do anything for me without testing it, however. I have no other access to WAN troubleshooting equipment. Are there any other options avail to me as a consumer?

  Read the article

• Managing service passwords with Puppet

  - by Jeff Ferland

  I'm setting up my Bacula configuration in Puppet. One thing I want to do is ensure that each password field is different. My current thought is to hash the hostname with a secret value that would ensure each file daemon has a unique password and that password can be written to both the director configuration and the file server. I definitely don't want to use one universal password as that would permit anybody who might compromise one machine to get access to any machine through Bacula. Is there another way to do this other than using a hash function to generate the passwords? Clarification: This is NOT about user accounts for services. This is about the authentication tokens (to use another term) in the client / server files. Example snippet: Director { # define myself Name = <%= hostname $>-dir QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 3 Password = "<%= somePasswordFunction =>" # Console password Messages = Daemon }

  Read the article

• unable to access Internet by wireless but can by cable

  - by Jeff King

  i'M GOING MAD! UNtil last friday I had been successfully using wifi with the supplier as VIRGIN through their Motorola SB 4200 cable Modem and the wireless router being the Linksys WRT 54G router. Supported were three lap tops and an EPSON 510W printer and this had been running with no issue for about 3 years. Back to last friday, we started suffering significant delays and then the network collapsed with no wireless access. I was able to connect a single laptop direct to the cable modem and internet access was restored to just that one device. I thought that the problem was the router so I tried a backup D-Link device with no success. I have subsequently bought another cable modem AND a netgear router plus addidtional ethernet cables but with no success. The best that happens is that the signal appears good but I cannot get access to the internet. A yellow question mark appears on the 'gradient' icon. Each laptop and router works elsewhere so I'm stumped. Mind you I am a real novice so I'm not surprised. Please can anyone tell me what I'm doing wrong?

  Read the article

• SSH authentification with public key fails

  - by palani

  I have my id_rsa.pub key under my /home/user/.ssh. I carefully copied that key and paste my key to respository Git account. While trying to connect from my local system to my git respository, I got the following error: warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.) I removed SSH in system and re-enable and did again, but no luck. I have no idea what's happening with my SSH key. Can any one please tell me on this? Note : I noticed in my home /home/user/.ssh && /home/user/.ssh2

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >