Search Results

Search found 3061 results on 123 pages for 'sata hdd'.

Page 108/123 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• VMWare server: virtual machine start-up reaches 95% and hangs

  - by Magsol

  This problem cropped up today, after updating my eVGA motherboard's chipset in order to try and fix an unrelated issue. After installing the chipset update (contained SATA and Ethernet drivers), every time I've tried to start my Ubuntu VM, it reaches 95% in the web interface and then just hangs. I'm using VMWare Server 2.0.2, running it within Windows 7 64-bit. I haven't had any issues up until now, and I suspect it has something to do with the chipset update. I've already tried reinstalling VMWare itself, removing the VM from the inventory and re-adding it, and neither has proved successful. I'm also not sure how to kill the VMware server process itself once the start-up hangs; I've only been able to try again by rebooting (as none of the VMWare Services listed kill the server process itself). Any insights? Edit: Uhhh...as an addendum: I have a cron job set up on my Ubuntu VM that runs every 20 minutes. The VM is still listed in the VMWare web interface as at 95% of startup, and the start/stop buttons are still disabled, but the cronjob just ran. I also tested SSH, and I was able to tunnel into the Ubuntu VM as well. Now I'm really confused. Edit #2: I just started a thread on the VMWare Server support forums on this same topic. Hopefully between the two communities, we can come up with an answer: http://communities.vmware.com/thread/251033 Edit #3: In lieu of a specific fix, I've switched over to VirtualBox, and all is working just fine.

  Read the article

• NTFS Corruption: Files created in Linux corrupted when Windows Boots

  - by Logan Mayfield

  I'm getting some file loss and corruption on my Win7/Ubuntu 12.04 dual boot setup. I have a large shared NTFS partition. I have my Windows Docs/Music/etc. directories on that file and have the comparable directors in Linux setup as a sym. link. I'm using ntfs-3g on the linux side of things to manage the ntfs partition. The shared partition is on a logical partition along with my Linux /home / and /swap partitions. The ntfs partition is mounted at boot time via fstab with the following options: ntfs-3g users,nls=utf8,locale=en_US.UTF-8,exec,rw The problem seems to be confined to newly created and recently edited files. I have not see data loss or corruption when creating/editing files in Windows and then moving over to Ubuntu. I've been using the sync command aggressively in Ubuntu to try to ensure everything is getting written to the HDD. I do not use hibernate in Windows so I know it's not the usual missing files due to Hibernation problem. I'm not seeing any mount related issues on dmesg. Most recently I had a set of files related to a LaTeX document go bad. Some of them show up in Ubuntu but I am unable to delete them. In the GUI file browser they are given thumbnails associated with files I created on my last boot of Windows. To be more specific: I created a few png files in Windows. The files corrupted by that Windows boot are associated with running PdfLatex on a file and are not image files. However, two of the corrupted files show up with the thumbnail image of one of the previously mentioned png files. The png files are not in the same directory as the latex files but they are both win the Document Folder tree. I've had sucess with using NTFS for shared data in the past and am hoping there's some quirk here I'm missing and it's not just bad luck. On one hand this appears to be some kind of Windows problem as data loss occurs when I boot to Windows after having worked in Ubuntu for a while. However, I'm assuming it's more on the Ubuntu end as it requires the special NTFS drivers. Edit for more info: This is a Lenovo Thinkpad L430. Purchased new in the last month. So it's a fairly fresh install. Many of the files on the shared partition were copied over from a previous NTFS formatted shared partition on another HDD. As requested: here's a sample chkdsk log. Some of the files its mentioning were files that got deleted off the partition while in Ubuntu. Others were created/edited but not deleted. Checking file system on D: Volume dismounted. All opened handles to this volume are now invalid. Volume label is Files. CHKDSK is verifying files (stage 1 of 3)... Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x789f47 for possibly 0x21 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x42 is already in use. Deleting corrupt attribute record (128, "") from file record segment 66. 86496 file records processed. File verification completed. 385 large file records processed. 0 bad file records processed. 0 EA records processed. 0 reparse records processed. CHKDSK is verifying indexes (stage 2 of 3)... Deleted invalid filename Screenshot from 2012-09-09 09:51:27.png (72) in directory 46. The NTFS file name attribute in file 0x48 is incorrect. 53 00 63 00 72 00 65 00 65 00 6e 00 73 00 68 00 S.c.r.e.e.n.s.h. 6f 00 74 00 20 00 66 00 72 00 6f 00 6d 00 20 00 o.t. .f.r.o.m. . 32 00 30 00 31 00 32 00 2d 00 30 00 39 00 2d 00 2.0.1.2.-.0.9.-. 30 00 39 00 20 00 30 00 39 00 3a 00 35 00 31 00 0.9. .0.9.:.5.1. 3a 00 32 00 37 00 2e 00 70 00 6e 00 67 00 0d 00 :.2.7...p.n.g... 00 00 00 00 00 00 90 94 49 1f 5e 00 00 80 d4 00 ......I.^.... File 72 has been orphaned since all its filenames were invalid Windows will recover the file in the orphan recovery phase. Correcting minor file name errors in file 72. Index entry found.000 of index $I30 in file 0x5 points to unused file 0x11. Deleting index entry found.000 in index $I30 of file 5. Index entry found.001 of index $I30 in file 0x5 points to unused file 0x16. Deleting index entry found.001 in index $I30 of file 5. Index entry found.002 of index $I30 in file 0x5 points to unused file 0x15. Deleting index entry found.002 in index $I30 of file 5. Index entry DOWNLO~1 of index $I30 in file 0x28 points to unused file 0x2b6. Deleting index entry DOWNLO~1 in index $I30 of file 40. Unable to locate the file name attribute of index entry Screenshot from 2012-09-09 09:51:27.png of index $I30 with parent 0x2e in file 0x48. Deleting index entry Screenshot from 2012-09-09 09:51:27.png in index $I30 of file 46. An index entry of index $I30 in file 0x32 points to file 0x151e8 which is beyond the MFT. Deleting index entry latexsheet.tex in index $I30 of file 50. An index entry of index $I30 in file 0x58bc points to file 0x151eb which is beyond the MFT. Deleting index entry D8CZ82PK in index $I30 of file 22716. An index entry of index $I30 in file 0x58bc points to file 0x151f7 which is beyond the MFT. Deleting index entry EGA4QEAX in index $I30 of file 22716. An index entry of index $I30 in file 0x58bc points to file 0x151e9 which is beyond the MFT. Deleting index entry NGTB469M in index $I30 of file 22716. An index entry of index $I30 in file 0x58bc points to file 0x151fb which is beyond the MFT. Deleting index entry WU5RKXAB in index $I30 of file 22716. Index entry comp220-lab3.synctex.gz of index $I30 in file 0xda69 points to unused file 0xd098. Deleting index entry comp220-lab3.synctex.gz in index $I30 of file 55913. Unable to locate the file name attribute of index entry comp220-numberGrammars.aux of index $I30 with parent 0xda69 in file 0xa276. Deleting index entry comp220-numberGrammars.aux in index $I30 of file 55913. The file reference 0x500000000cd43 of index entry comp220-numberGrammars.out of index $I30 with parent 0xda69 is not the same as 0x600000000cd43. Deleting index entry comp220-numberGrammars.out in index $I30 of file 55913. The file reference 0x500000000cd45 of index entry comp220-numberGrammars.pdf of index $I30 with parent 0xda69 is not the same as 0xc00000000cd45. Deleting index entry comp220-numberGrammars.pdf in index $I30 of file 55913. An index entry of index $I30 in file 0xda69 points to file 0x15290 which is beyond the MFT. Deleting index entry gram.aux in index $I30 of file 55913. An index entry of index $I30 in file 0xda69 points to file 0x15291 which is beyond the MFT. Deleting index entry gram.out in index $I30 of file 55913. An index entry of index $I30 in file 0xda69 points to file 0x15292 which is beyond the MFT. Deleting index entry gram.pdf in index $I30 of file 55913. Unable to locate the file name attribute of index entry comp230-quiz1.synctex.gz of index $I30 with parent 0xda6f in file 0xd183. Deleting index entry comp230-quiz1.synctex.gz in index $I30 of file 55919. An index entry of index $I30 in file 0xf3cc points to file 0x15283 which is beyond the MFT. Deleting index entry require-transform.rkt in index $I30 of file 62412. An index entry of index $I30 in file 0xf3cc points to file 0x15284 which is beyond the MFT. Deleting index entry set.rkt in index $I30 of file 62412. An index entry of index $I30 in file 0xf497 points to file 0x15280 which is beyond the MFT. Deleting index entry logger.rkt in index $I30 of file 62615. An index entry of index $I30 in file 0xf497 points to file 0x15281 which is beyond the MFT. Deleting index entry misc.rkt in index $I30 of file 62615. An index entry of index $I30 in file 0xf497 points to file 0x15282 which is beyond the MFT. Deleting index entry more-scheme.rkt in index $I30 of file 62615. An index entry of index $I30 in file 0xf5bf points to file 0x15285 which is beyond the MFT. Deleting index entry core-layout.rkt in index $I30 of file 62911. An index entry of index $I30 in file 0xf5e0 points to file 0x15286 which is beyond the MFT. Deleting index entry ref.scrbl in index $I30 of file 62944. An index entry of index $I30 in file 0xf6f0 points to file 0x15287 which is beyond the MFT. Deleting index entry base-render.rkt in index $I30 of file 63216. An index entry of index $I30 in file 0xf6f0 points to file 0x15288 which is beyond the MFT. Deleting index entry html-properties.rkt in index $I30 of file 63216. An index entry of index $I30 in file 0xf6f0 points to file 0x15289 which is beyond the MFT. Deleting index entry html-render.rkt in index $I30 of file 63216. An index entry of index $I30 in file 0xf6f0 points to file 0x1528b which is beyond the MFT. Deleting index entry latex-prefix.rkt in index $I30 of file 63216. An index entry of index $I30 in file 0xf6f0 points to file 0x1528c which is beyond the MFT. Deleting index entry latex-render.rkt in index $I30 of file 63216. An index entry of index $I30 in file 0xf6f0 points to file 0x1528e which is beyond the MFT. Deleting index entry scribble.tex in index $I30 of file 63216. An index entry of index $I30 in file 0xf717 points to file 0x1528a which is beyond the MFT. Deleting index entry lang.rkt in index $I30 of file 63255. An index entry of index $I30 in file 0xf721 points to file 0x1528d which is beyond the MFT. Deleting index entry lang.rkt in index $I30 of file 63265. An index entry of index $I30 in file 0xf764 points to file 0x1528f which is beyond the MFT. Deleting index entry lang.rkt in index $I30 of file 63332. An index entry of index $I30 in file 0x14261 points to file 0x15270 which is beyond the MFT. Deleting index entry fddff3ae9ae2221207f144821d475c08ec3d05 in index $I30 of file 82529. An index entry of index $I30 in file 0x14621 points to file 0x15268 which is beyond the MFT. Deleting index entry FETCH_HEAD in index $I30 of file 83489. An index entry of index $I30 in file 0x14650 points to file 0x15272 which is beyond the MFT. Deleting index entry 86 in index $I30 of file 83536. An index entry of index $I30 in file 0x14651 points to file 0x15266 which is beyond the MFT. Deleting index entry pack-7f54ce9f8218d2cd8d6815b8c07461b50584027f.idx in index $I30 of file 83537. An index entry of index $I30 in file 0x14651 points to file 0x15265 which is beyond the MFT. Deleting index entry pack-7f54ce9f8218d2cd8d6815b8c07461b50584027f.pack in index $I30 of file 83537. An index entry of index $I30 in file 0x146f1 points to file 0x15275 which is beyond the MFT. Deleting index entry master in index $I30 of file 83697. An index entry of index $I30 in file 0x146f6 points to file 0x15276 which is beyond the MFT. Deleting index entry remotes in index $I30 of file 83702. An index entry of index $I30 in file 0x1477d points to file 0x15278 which is beyond the MFT. Deleting index entry pad.rkt in index $I30 of file 83837. An index entry of index $I30 in file 0x14797 points to file 0x1527c which is beyond the MFT. Deleting index entry pad1.rkt in index $I30 of file 83863. An index entry of index $I30 in file 0x14810 points to file 0x1527d which is beyond the MFT. Deleting index entry cm.rkt in index $I30 of file 83984. An index entry of index $I30 in file 0x14926 points to file 0x1527e which is beyond the MFT. Deleting index entry multi-file-search.rkt in index $I30 of file 84262. An index entry of index $I30 in file 0x149ef points to file 0x1527f which is beyond the MFT. Deleting index entry com.rkt in index $I30 of file 84463. An index entry of index $I30 in file 0x14b47 points to file 0x15202 which is beyond the MFT. Deleting index entry COMMIT_EDITMSG in index $I30 of file 84807. An index entry of index $I30 in file 0x14b47 points to file 0x15279 which is beyond the MFT. Deleting index entry index in index $I30 of file 84807. An index entry of index $I30 in file 0x14b4c points to file 0x15274 which is beyond the MFT. Deleting index entry master in index $I30 of file 84812. An index entry of index $I30 in file 0x14b61 points to file 0x1520b which is beyond the MFT. Deleting index entry 02 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x1525a which is beyond the MFT. Deleting index entry 28 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x15208 which is beyond the MFT. Deleting index entry 29 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x1521f which is beyond the MFT. Deleting index entry 2c in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x15261 which is beyond the MFT. Deleting index entry 2e in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x151f0 which is beyond the MFT. Deleting index entry 45 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x1523e which is beyond the MFT. Deleting index entry 47 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x151e5 which is beyond the MFT. Deleting index entry 49 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x15214 which is beyond the MFT. Deleting index entry 58 in index $I30 of file 84833. Index entry 6e of index $I30 in file 0x14b61 points to unused file 0xd182. Deleting index entry 6e in index $I30 of file 84833. Unable to locate the file name attribute of index entry a0 of index $I30 with parent 0x14b61 in file 0xd29c. Deleting index entry a0 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x1521b which is beyond the MFT. Deleting index entry cd in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x15249 which is beyond the MFT. Deleting index entry d6 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x15242 which is beyond the MFT. Deleting index entry df in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x15227 which is beyond the MFT. Deleting index entry ea in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x1522e which is beyond the MFT. Deleting index entry f3 in index $I30 of file 84833. An index entry of index $I30 in file 0x14b61 points to file 0x151f2 which is beyond the MFT. Deleting index entry ff in index $I30 of file 84833. An index entry of index $I30 in file 0x14b62 points to file 0x15254 which is beyond the MFT. Deleting index entry 1ed39b36ad4bd48c91d22cbafd7390f1ea38da in index $I30 of file 84834. An index entry of index $I30 in file 0x14b75 points to file 0x15224 which is beyond the MFT. Deleting index entry 96260247010fe9811fea773c08c5f3a314df3f in index $I30 of file 84853. An index entry of index $I30 in file 0x14b79 points to file 0x15219 which is beyond the MFT. Deleting index entry 8f689724ca23528dd4f4ab8b475ace6edcb8f5 in index $I30 of file 84857. An index entry of index $I30 in file 0x14b7c points to file 0x15223 which is beyond the MFT. Deleting index entry 1df17cf850656be42c947cba6295d29c248d94 in index $I30 of file 84860. An index entry of index $I30 in file 0x14b7c points to file 0x15217 which is beyond the MFT. Deleting index entry 31db8a3c72a3e44769bbd8db58d36f8298242c in index $I30 of file 84860. An index entry of index $I30 in file 0x14b7c points to file 0x15267 which is beyond the MFT. Deleting index entry 8e1254d755ff1882d61c07011272bac3612f57 in index $I30 of file 84860. An index entry of index $I30 in file 0x14b82 points to file 0x15246 which is beyond the MFT. Deleting index entry f959bfaf9643c1b9e78d5ecf8f669133efdbf3 in index $I30 of file 84866. An index entry of index $I30 in file 0x14b88 points to file 0x151fe which is beyond the MFT. Deleting index entry 7e9aa15b1196b2c60116afa4ffa613397f2185 in index $I30 of file 84872. An index entry of index $I30 in file 0x14b8a points to file 0x151ea which is beyond the MFT. Deleting index entry 73cb0cd248e494bb508f41b55d862e84cdd6e0 in index $I30 of file 84874. An index entry of index $I30 in file 0x14b8e points to file 0x15264 which is beyond the MFT. Deleting index entry bd555d9f0383cc14c317120149e9376a8094c4 in index $I30 of file 84878. An index entry of index $I30 in file 0x14b96 points to file 0x15212 which is beyond the MFT. Deleting index entry 630dba40562d991bc6cbb6fed4ba638542e9c5 in index $I30 of file 84886. An index entry of index $I30 in file 0x14b99 points to file 0x151ec which is beyond the MFT. Deleting index entry 478be31ca8e538769246e22bba3330d81dc3c8 in index $I30 of file 84889. An index entry of index $I30 in file 0x14b99 points to file 0x15258 which is beyond the MFT. Deleting index entry 66c60c0a0f3253bc9a5112697e4cbb0dfc0c78 in index $I30 of file 84889. An index entry of index $I30 in file 0x14b9c points to file 0x15238 which is beyond the MFT. Deleting index entry 1c7ceeddc2953496f9ffbfc0b6fb28846e3fe3 in index $I30 of file 84892. An index entry of index $I30 in file 0x14b9c points to file 0x15247 which is beyond the MFT. Deleting index entry ae6e32ffc49d897d8f8aeced970a90d3653533 in index $I30 of file 84892. An index entry of index $I30 in file 0x14ba0 points to file 0x15233 which is beyond the MFT. Deleting index entry f71c7d874e45179a32e138b49bf007e5bbf514 in index $I30 of file 84896. Index entry 2e04fefbd794f050d45e7a717d009e39204431 of index $I30 in file 0x14ba7 points to unused file 0xd097. Deleting index entry 2e04fefbd794f050d45e7a717d009e39204431 in index $I30 of file 84903. An index entry of index $I30 in file 0x14baa points to file 0x15241 which is beyond the MFT. Deleting index entry 0dda7dec1c635cd646dfef308e403c2843d5dc in index $I30 of file 84906. An index entry of index $I30 in file 0x14baa points to file 0x151fc which is beyond the MFT. Deleting index entry 98151e654dd546edcfdec630bc82d90619ac8e in index $I30 of file 84906. An index entry of index $I30 in file 0x14bb1 points to file 0x151e9 which is beyond the MFT. Deleting index entry 1997c5be62ffeebc99253cced7608415e38e4e in index $I30 of file 84913. An index entry of index $I30 in file 0x14bb1 points to file 0x1521d which is beyond the MFT. Deleting index entry 6bf3aedefd3ac62d9c49cad72d05e8c0ad242c in index $I30 of file 84913. An index entry of index $I30 in file 0x14bb1 points to file 0x151f4 which is beyond the MFT. Deleting index entry 907b755afdca14c00be0010962d0861af29264 in index $I30 of file 84913. An index entry of index $I30 in file 0x14bb3 points to file 0x15218 which is beyond the MFT. Deleting index entry

  Read the article

• How to (un)dock IBM Thinkpad X41 from X4 Dock(ing station) successfully?

  - by nutty about natty

  I'd like to start using my docking station again; however, it still doesn't work as it should, see the following bug descriptions (with special focus on Thinkpad X41 & the X4 Dock). Given that it still doesn't work (effective April 2012), my hope is fading that it will start working all of a sudden with Precise Pangolin at the end of the month. This issue is VERY important to me and I would be MOST grateful to anyone being able to sieve through the following links (some of which are actually quite recent) and translate their meaning into reliable and concrete simple (?) steps. I've read briefly about hal and udev, and can imagine that they are somewhat related to this, see links below. I don't want to fire at random. I don't want to tinker around with bash scripts if avoidable... Problem description (more or less ;-) Pressing the undock button on a "ThinkPad X4 Dock" with a ThinkPad X40 does not cause any udev events. And the lights on the dock never change to indicate it is safe to undock. and IBM Thinkpad X41 & docking station no joy :-( ... when pressing the blue undock button on the docking station: - The screen goes blank (with backlight remaining on), - with some SSD/HDD activity; - ctrl alt del causes a shut down after ... seconds, indicating that the system itself hasn't "crashed" but is still (somewhat ?) responsive. and With recent distributions, docking and undocking should function out of the box. You can monitor this by running # udevadm monitor and when you dock or press the undock button you should see a flurry of events. There are some issues though: No event on undock. - In some cases you may not get any events on undock. This is due to the ACPI dock drivers only registering the first logical Dock port they encounter and in some rare cases there may be more then one, such as on a ThinkPad X40 with ThinkPad X4 Dock. Patches are available, and are merged in 2.6.34. Now, if patches are available and merged into 2.6.34 - why isn't (un)docking simply working / fully supported in the latest version of Natty (which to my humble understanding has surpassed kernel version 2.6.34 a while ago)? More relevant links: ThinkPad X41 Docking Station issues and [HOWTO] Run scripts for laptop lid open/close and dock/undock events and finally Symptoms corrected by the latest BIOS Update - ThinkPad X41 - (Fix) USB devices connected to UltraBase X4 or ThinkPad X4 Dock may not be recognized in Boot Menu by pressing F12 during POST. Thanks!!

  Read the article

• How can I troubleshoot flash player/hardware conflict?

  - by sparthikas

  OBJECTIVE: Have a web browser on my Ubuntu install that can play youtube and hulu videos. Also would like to understand problem so that I can fix it again if I change software. Workarounds welcome, technical understanding and solution preferable. SYMPTOMS: Flash does not run - cannot make the right-click menu appear, an empty box is where video should be, changes to black box when hovering over other links. The "The Adobe Flash plugin has crashed" message does not appear with its sad lego face. cannot activate proprietary graphics driver - causes system to reboot to a prompt. SOLUTIONS TRIED: Replaced OS (tried slackware 13.37, fedora 17, linuxmint 13 maya, gentoo, lubuntu, and even winXP. lubuntu confirmed to work, don't remember how much tweaking, if any, this required. Slack, fedora, mint, and gentoo all failed to run flash just like ubuntu) many reinstalls of flash player via different methods, including cleaning up old installs first, also tried gnash and lightspark. replaced graphics card (replaced HIS IceQ Radeon HD 4670 AGP with older GeForce 5700 LE no change in problem) flash does successfully work on winXP installation with Catalyst AGP hotfix driver applied, however I consider windows wholly unacceptable for web browsing due to lack of security. Lubuntu install also works, however I do not want to be tied down to just using Lubuntu on this computer. SYSINFO: Have latest versions of Ubuntu, Firefox, and Flash on fresh Ubuntu install. Using Gigabyte 7s748 motherboard with Athlon XP 2800+ and 3 GB of RAM with Radeon HD 4670 AGP card, also a Dell soundblaster live series sound card (due to malfunction of onboard sound on motherboard) Wired internet connection, Maxtor 6Y120L3 HDD, Sony DVD RW AW-Q170A, Dell M993s monitor. NOTES: I do not know if the graphics driver issue and the flash troubles are linked. Substitution of older graphics card having same flash troubles seems to suggest they aren't. My troubleshooting method is rather reductionist, consisting mainly of "replace things until you find out what was causing the error by process of elimination" only it seems that this must be a conflict which arises when software decides how to configure itself on my hardware. That is, I know the hardware can run Flash, and I know that on other systems the same software can too, but somehow the combination fails. Consequently I feel out of my depth. I will keep trying things off and on, but I have spent probably about 30 man-hours in the last 4 months working on this problem with no joy other than the lubuntu workaround. Any help will be appreciated, I will be checking back and posting updates. Any pertinent questions regarding me or my computer will be answered, outputs from config files can be accessed and posted (IDK which ones or what parts to post).

  Read the article

• Oracle’s Sun Server X4-8 with Built-in Elastic Computing

  - by kgee

  We are excited to announce the release of Oracle's new 8-socket server, Sun Server X4-8. It’s the most flexible 8-socket x86 server Oracle has ever designed, and also the most powerful. Not only does it use the fastest Intel® Xeon® E7 v2 processors, but also its memory, I/O and storage subsystems are all designed for maximum performance and throughput. Like its predecessor, the Sun Server X4-8 uses a “glueless” design that allows for maximum performance for Oracle Database, while also reducing power consumption and improving reliability. The specs are pretty impressive. Sun Server X4-8 supports 120 cores (or 240 threads), 6 TB memory, 9.6 TB HDD capacity or 3.2 TB SSD capacity, contains 16 PCIe Gen 3 I/O expansion slots, and allows for up to 6.4 TB Sun Flash Accelerator F80 PCIe Cards. The Sun Server X4-8 is also the most dense x86 server with its 5U chassis, allowing 60% higher rack-level core and DIMM slot density than the competition.  There has been a lot of innovation in Oracle’s x86 product line, but the latest and most significant is a capability called elastic computing. This new capability is built into each Sun Server X4-8.   Elastic computing starts with the Intel processor. While Intel provides a wide range of processors each with a fixed combination of core count, operational frequency, and power consumption, customers have been forced to make tradeoffs when they select a particular processor. They have had to make educated guesses on which particular processor (core count/frequency/cache size) will be best suited for the workload they intend to execute on the server.Oracle and Intel worked jointly to define a new processor, the Intel Xeon E7-8895 v2 for the Sun Server X4-8, that has unique characteristics and effectively combines the capabilities of three different Xeon processors into a single processor. Oracle system design engineers worked closely with Oracle’s operating system development teams to achieve the ability to vary the core count and operating frequency of the Xeon E7-8895 v2 processor with time without the need for a system level reboot.  Along with the new processor, enhancements have been made to the system BIOS, Oracle Solaris, and Oracle Linux, which allow the processors in the system to dynamically clock up to faster speeds as cores are disabled and to reach higher maximum turbo frequencies for the remaining active cores. One customer, a stock market trading company, will take advantage of the elastic computing capability of Sun Server X4-8 by repurposing servers between daytime stock trading activity and nighttime stock portfolio processing, daily, to achieve maximum performance of each workload.To learn more about Sun Server X4-8, you can find more details including the data sheet and white papers here.Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software. He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Ubuntu server spontaneous reboot

  - by user1941407

  I have got two ubuntu 12.04 servers(xeon e3). Sometimes(several days) each server spontaneously reboots. HDDs and other hardware are ok. Which logfile can help find a reason of the problem? UPDATED. hardware: xeon e3 processor, intel server motherboard, 32gb ddr3 ecc, mdadm mirror hdd raid for system, mdadm ssd raid for database(postgres). Both servers have similar (not identical) components. Smart is OK. It seems that the problem is in the software. Python process and database are running on this servers. Syslog (time of reboot): Aug 23 13:42:23 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:42:23 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:43:24 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:43:24 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:44:14 xeon sensord: Chip: acpitz-virtual-0 Aug 23 13:44:14 xeon sensord: Adapter: Virtual device Aug 23 13:44:14 xeon sensord: temp1: 27.8 C Aug 23 13:44:14 xeon sensord: temp2: 29.8 C Aug 23 13:44:14 xeon sensord: Chip: coretemp-isa-0000 Aug 23 13:44:14 xeon sensord: Adapter: ISA adapter Aug 23 13:44:14 xeon sensord: Physical id 0: 37.0 C Aug 23 13:44:14 xeon sensord: Core 0: 37.0 C Aug 23 13:44:14 xeon sensord: Core 1: 37.0 C Aug 23 13:44:14 xeon sensord: Core 2: 37.0 C Aug 23 13:44:14 xeon sensord: Core 3: 37.0 C Aug 23 13:44:24 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:44:24 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:47:01 xeon kernel: imklog 5.8.6, log source = /proc/kmsg started. Aug 23 13:47:01 xeon rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="582" x-info="http://www.rsyslog.com"] start Aug 23 13:47:01 xeon rsyslogd: rsyslogd's groupid changed to 103 Aug 23 13:47:01 xeon rsyslogd: rsyslogd's userid changed to 101 Aug 23 13:47:00 xeon rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpuset Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpuacct Aug 23 13:47:01 xeon kernel: [ 0.000000] Linux version 3.11.0-26-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #45~precise1-Ubuntu SMP Tue Jul 15 04:02:35 UTC 2014 (Ubuntu 3.11.0-26.45~precise1-generic 3.11.10.12) Aug 23 13:47:01 xeon kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-26-generic root=UUID=0daa7f53-6c74-47d2-873e-ebd339cd39b0 ro splash quiet vt.handoff=7 Aug 23 13:47:01 xeon kernel: [ 0.000000] KERNEL supported cpus: Aug 23 13:47:01 xeon kernel: [ 0.000000] Intel GenuineIntel Aug 23 13:47:01 xeon kernel: [ 0.000000] AMD AuthenticAMD Aug 23 13:47:01 xeon kernel: [ 0.000000] Centaur CentaurHauls Aug 23 13:47:01 xeon kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Aug 23 13:47:01 xeon kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable Aug 23 13:47:01 xeon kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved Dmseg - nothing strange.

  Read the article

• DELL Inspiron 9400 SD Card Reader not working on 10.11 ubuntu

  - by Mario Martz

  Im new in linux, just installed Ubuntu 11.10 in a Dell Inspiron 9400, everything works fine with the exception of the SD card reader, everytime I insert a card the computer doesnt do anything, its like the SD card reader is not there. I did a $lspci and it shows the next drivers 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Everytime I insert a memory card, dmesg shows the next d status 0x600b00 [ 2687.227351] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.229436] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.229440] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.230512] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.230515] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.231588] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.231592] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.232674] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.232678] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.234763] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.234766] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.236864] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.236868] end_request: I/O error, dev mmcblk0, sector 70 [ 2687.238942] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.238946] end_request: I/O error, dev mmcblk0, sector 71 [ 2687.238949] Buffer I/O error on device mmcblk0, logical block 8 [ 2687.241028] mmcblk0: retrying using single block read [ 2687.243104] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.243108] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.245212] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.245215] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.247298] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.247302] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.248389] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.248393] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.250476] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.250480] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.252617] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.252621] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.254737] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 and more of the same but with different sector number Im using Kernel 3.0.0-12-generic By the way, when I was installing it and ubuntu asks about installation (If I want to install it along with windows or delete something or change the partitions of the HDD) if I go to the window to change the partition of the disc, linux detects the SD Card (if there's one inserted course). Any help with this it would be appreciated -sorry for my english Thank you

  Read the article

• ZTE USB Modem AC2736, connection not possible in Ubuntu 12.04.1 LTS

  - by Fredo

  It's a long post but nearly covers all my experiments and changes I did to my NM. Hope the information is complete and if there are still question, more information can be provided. I've a ZTE AC2736 USB Modem (CDMA modem) which worked fine in Ubuntu 10.04 /11.10. I recently switched to 12.04.1 (precise pangolin). after the switch the first issue I faced was to connect to internet using my USB modem (ISP: Reliance Brand: Netconnect). Tried to run the drivers provided by Reliance but they are old and won't support Kernel 2.6.30 above. since the code was not downloaded with ISO image (of 12.04) i couldn't compile the files provided in such driver. lsusb does detect it as Modem with output similar to 19d2:fff1 ZTE CDMA technologies inc. (or similar as i didn't note it down) If it is detected as USB storage it shows 19d2:fff5 (as per few online forums, i may be wrong here). I used the network Manager and configured the modem to dial #777 (default) and the ISP provided username:password combination. It tries to connect to internet (3-4 times automatically)but fails to get online. once I was able to connect in the monring hours and the message was flashed 'registered on CDMA home network'. I was able to run an update. the kernel was updated with 3.0.2 -pae OR something similar (can find out if required). I surfed the net for about 2 hours later before restarting. After the restart, again the Modem was not able to get me online. I kept trying for many times. I tried changing the setting in NM. One evening after dark I was able to connect to network with same message flash 'registered on CDMA home network' (the message was similar, i'm not precise here,sorry). I was able to surf the net for nearly 3 hours before I switched off my Laptop. I'm not able to get online after that day, It's been 3 days now. I'll try the observered theory of late/early hours sometime soon as mentioned below. Laptop configuration : Make: Lenovo Model: B480 Processor: Intel B950 RAM: 4G DDR3 HDD: 500 G Broadcom Wireless/Bluetooth/Ethernet LAN OS: FreeDOS / Ubuntu 12.04 LTS (dualboot) Kernel 3.0.2-pae Obeservation : I'm able to connect to internet in those hours when generally the speed is high (low usage by other network (wireless) users). like in early mornings or late nights. This is strange as connection should not be dependent on bandwidth usage. Any help would be appraciated to fix this issue. before I decide to cahnge the OS or ISP.

  Read the article

• I can't install Ubuntu 12.04.1 on iMac G5

  - by user89004

  So, I have this iMac G5 that doesn't have iSight, only a small light sensor I think undernieth, machine model 8.2. I tried burning a Ubuntu 12.04.1 PowerPC 64bit .iso to a cd but the computer just won't boot it, I don't know why. Next I tried with a USB but it wouldn't let me boot that either, I created the usb on my dad's win7 laptop as the process was way easier than on freakin Mac or Ubuntu (no command typing AT ALL on windows) I'm able to get into openfirmware and type boot usb and it does show some weird writing that scrolls so fast I can't see anything and then it just gives me this huge no sign like a stop sign and freezez. The sign is grey and the line in the middle is tilted towards the left. An other issue I'm having with hdiutil is that I can't convert the stupid .iso I just downloaded into a .img because the file keeps on dissapearing right when it's done converting it. I used the syntax from Ubuntu support how to create a bootable usb drive under Mac OS X. I even didn't include the 2 stupid ~ that are shown in the syntax that are completly worthless, God only know why they put them there, and I even tried running the whole thing as root with sudo su before the command. The funny thing is that if I convert something smaller it works. The command I was using is hdiutil convert -format UDRW -o /path/to/target.img /path/to/ubuntu.iso I even tried hdiutil convert /path/to/ubuntu.iso -format UDRW -o /path/to/target.img but the same thing happens, the dummy .img.dmg file dissapears when the conversion is done no matter where I set the output file to go. I have tried several different folders, the same thing happens with all of them. I also tried burning a Ubuntu mini iso on a cd, can't remember if it was 11.10 or 12.10 but even thoguh holding c when the iMac boots up does show me the cd and I can boot from it, I get this weird error upon hitting install, it says something like invalid memory access, release keys and error strings I can't read. I don't have any original DVDs from this iMac and can't run hardware diagnostics. WHatever option I try at the command prompt from the mini ubuntu cd I get the same result, error code and openfirmware backdrop that's frozen. I noticed that the pen drive I created on my dads Win7 laptop is formated with MS-DOS but I can still mount it no problem, so it shouldn't have a problem booting it, right? I used the advice on ubuntu.com to make it, from here. Also, my partition is HFS+ so I can't use it as a hard drive and boot from it. I don' have 2 partitions either, just one HDD, one partition. Please help!!!

  Read the article

• How migrate my keyring (containing ssh passprases, nautilus remote filesystem, pgp passwords) and network manager connections?

  - by con-f-use

  I changed the disk on my laptop and installed Ubuntu on the new disk. Old disk had 12.04 upgraded to 12.10 on it. Now I want to copy my old keyring with WiFi passwords, ftp passwords for nautilus and ssh key passphrases. I have the whole data from the old disk available (is now a USB disk and I did not delete the old data yet or do anything with it - I could still put it in the laptop and boot from it like nothing happened). On the new disc that is now in my laptop, I have installed 12.10 with the same password, user-id and username as on the old disk. Then I copied a few important config files from the old disk (e.g. ~/.firefox/, ~/.mozilla, ~/.skype and so on, which all worked fine... except for the key ring: The old methods of just copying ~/.gconf/... and ~/.gnome2/keyrings won't work. Did I miss something? 1. Edit: I figure one needs to copy files not located in the users home directory as well. I copied the whole old /home/confus (which is my home directory) to the fresh install to no effect. That whole copy is now reverted to the fresh install's home directory, so my /home/confus is as it was the after fresh install. 2. Edit: The folder /etc/NetworkManager/system-connections seems to be the place for WiFi passwords. Could be that /usr/share/keyrings is important as well for ssh keys - that's the only sensible thing that a search came up with: find /usr/ -name "*keyring* 3. Edit: Still no ssh and ftp passwords from the keyring. What I did: Convert old hard drive to usb drive Put new drive in the laptop and installed fresh version of 12.10 there (same uid, username and passwort) Booted from old hdd via USB and copied its /etc/NetwrokManager/system-connections, ~/.gconf/ and ~/.gnome2/keyrings, ~/.ssh over to the new disk. Confirmed that all keys on the old install work Booted from new disk Result: No passphrase for ssh keys, no ftp passwords in keyring. At least the WiFi passwords are migrated. 4. Edit: Boutny! Ending soon... 5. Edit: Keyring's now in ./local/share/keyrings/. Also interesting .gnupg

  Read the article

• Need help fixing DPKG errors after update from 12.04 to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

  Read the article

• 12.04 Unity 3D 80% CPU load with Compiz

  - by user39288

  EDIT : I have been able to to determine that the problem is not compiz, but is actually Xorg. I don't know why, but by quickly maximizing terminal and taking a screenshot with top running before the problem went away I am able to see xorg takes up 72% of cpu, with bamfdaemon taking up 18%, and compiz taking up 14%. Seems the nvidia drivers are to blame, will play more with settings and perhaps do a clean nvidia-current install to try to fix the problem. Having a very annoying problem with high CPU usage. Running 12.04 with latest drivers and nvidia-current installed. Have not had any issues for days, now I have a strange problem. Unity 3d runs great most of the time, 1-2% CPU usage with only transmission running in background. Windows open and close smoothly. However,no matter what programs are open, if I minimize all open programs to the unity bar on the left, my CPU jumps to about 80% and slows down all maximize and minimize effects. Mouse movement stays smooth the whole time, but unity becomes unresponsive for up to 30 seconds at times. Hitting alt + tab to bring up even a single window fixes the problem. The window I bring back up doesn't even have to be maximized to solve the problem. Hitting the super button to bring up the dash makes CPU drop back to idle until I close it, then high CPU usage resumes. Believe the problem is compiz, but even just having only terminal running "top", I have to minimize it to the tray for the problem to show, so I can't see the problem process. I can only tell about the high CPU usage using indicator-sysmonitor. Even tried quitting the indicator, but I can still tell very poor performance with all applications when minimized. Reset compiz back to defaults, tried going to the post-release update nvidia drivers, played with vsync settings in both the nvidia settings and compiz. Even forced refresh rate, but cannot solve the problem. The problem does NOT occur in Unity 2D. Specs are core 2 duo 2.0ghz, 4GB ddr2 ram, 2x 320's HDD in RAID 0, and Nvidia GTX 260M graphics card.

  Read the article

• Block-level deduplicating filesystem

  - by James Haigh

  I'm looking for a deduplicating copy-on-write filesystem solution for general user data such as /home and backups of it. It should use online/inline/synchronous deduplication at the block-level using secure hashing (for negligible chance of collisions) such as SHA256 or TTH. Duplicate blocks need not even touch the disk. The idea is that I should be able to just copy /home/<user> to an external HDD with the same such filesystem to do a backup. Simple. No messing around with incremental backups where corruption to any of the snapshots will nearly always break all later snapshots, and no need to use a specific tool to delete or 'checkout' a snapshot. Everything should simply be done from the file browser without worry. Can you imagine how easy this would be? I'd never have to think twice about backing-up again! I don't mind a performance hit, reliability is the main concern. Although, with specific implementations of cp, mv and scp, and a file browser plugin, these operations would be very fast, especially when there is a lot of duplication as they would only need to transfer the absent blocks. Accidentally using conventional copy tools that do not integrate with the FS would merely take longer, waste some bandwidth when copying remotely and waste some CPU, as the duplicate data would be re-read, re-transferred and re-hashed (although nothing would be re-written), but would absolutely not corrupt anything. (Some filesharing software may also be able to benefit by integrating with the FS.) So what's the best way of doing this? I've looked at some options: lessfs - Looks unmaintained. Any good? [Opendedup/SDFS][3] - Java? Could I use this on Android?! What does [SDFS][4] stand for? [Btrfs][5] - Some patches floating around on mailing list archives, but no real support. [ZFS][6] - Hopefully they'll one day relicense under a true Free/Opensource GPL-compatible licence. Also, 2 years ago I had a go at an attempt in Python using Fuse at the file-level to be used over the top of a typical solid FS such as EXT4, but I found Fuse for Python underdocumented and didn't manage to implement all of the system calls. My first post here, so I can't post more than 2 links until I get over 10 rep: [3]: http://www.opendedup.org/ [4]: https://en.wikipedia.org/w/index.php?title=SDFS&action=edit&redlink=1 [5]: https://en.wikipedia.org/wiki/Btrfs#Features [6]: https://en.wikipedia.org/wiki/ZFS#Linux

  Read the article

• Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

  Read the article

• Dual booting windows 8/ubuntu 12.04. Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance

  Read the article

• RAID1: can't replace faulty spare (marked again as 'faulty spare' within seconds)

  - by user212475

  I got a problem that I cannot solve: Our fileserver runs XUbuntu and 3 RAID1s. One has a problem since monday: it consists of sdb and sdc. sdb was marked as faulty by mdadm for unknown reasons. I used --remove to remove it from the RAID and then to add it by --add. All was fine, re-syncing started but never got above 0% and after a few seconds, sdb was again marked as 'faulty spare' (and therefore the RAID degraded, but clean). So I saved the first 512 byte of the old sdb to a file, bought a new HDD of same size (4TB), shut down the computer and replaced sdb physically, switched the computer back on and wrote the 512 byte back to the new drive to have the same partition info as the old drive (both are the same type, from same company). But the new drive shows the same behaviour as the old: I can add, re-syncing starts and after a few seconds its marked as 'faulty spare'. Here exactly what i did: mdadm --remove /dev/md/1 /dev/sdb maadm --detail /dev/md/1 gives me: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:56:13 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2424 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc mdadm --add /dev/md/1 /dev/sdb mdadm --detail /dev/md/1 gives me: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:49 2013 State : clean, degraded, recovering Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Rebuild Status : 0% complete Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2431 Number Major Minor RaidDevice State 2 8 16 0 faulty spare rebuilding /dev/sdb 1 8 32 1 active sync /dev/sdc and after a few seconds: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:50 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2436 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc 2 8 16 - faulty spare /dev/sdb same behaviour if I zero the superblock (mdadm --zero-superblock /dev/sdb) before adding sdb. I do all commands as root and the system holds 3 more 4TB drives, ie the mainboard can handle them. The old harddrive was checked for errors using badblocks, but all is fine. Does anybody have any idea, what the problem is?

  Read the article

• How do you turn on the customizable gnome-panel features (like gnome-applets) in Precise?

  - by chriv

  I resurrected a broken laptop today. I took out the HDD, put it in a USB 3.0 enclosure, and created a VM that would use it. It was running lucid. I took a screenshot of the desktop before I started "do-release-upgrade", because from experience, I will never have my GUI back the way I want it again. I know how to install gnome-panel to get back the "Gnome Classic" session option. I know how to put my minimize, maximize, and close buttons back in the upper-right hand corner of windows (where they belong). I know how to use gdm instead of lightdm. Unity gets worse in every version (and the other desktop OS is going to be even worse with Metro). Here's what I don't know (in order of importance): 1. How do you make the panels in gnome (gnome-panel, to be precise) customizable again (like they were in older versions of Ubuntu)? 2. How do you install applets in the panels now (right-click is now ignored)? 3. How can you customize all of the window elements (like you could in older versions of Ubuntu)? I can't remember much about maverick, natty, or oneiric (except their names), so I don't know exactly when I lost these capabilities. Edit: (no screenshot), my StackExchange reputation (on other StackExchange sites) doesn't carry over to this site, so I can't post the screenshot. Take a look at the panels in the screen hot. They are nice, compact, and VERY functional (disk mounter applet, frequently used shortcuts, workspaces, show desktop, kill window, and trash icons, etc.) Notice how small the fonts (and how little real estate they waste). You can't notice the compact title bars, fonts, and window icons in this screen shot (since I redacted the rest of the desktop), but it's the same story there. Please help. I don't want to learn another distro, but Ubuntu gets less customizable with every "upgrade." Screenshot (not an inline image, since I don't have the reputation yet)... i.stack.imgur.com/puoUT.png

  Read the article

• New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

  - by Flaminica

  Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• A better way to organize your Silverlight Code Snippets.

  - by mbcrump

  I hate re-writing code. I also hate it when I find a great code snippet on the web and forget to bookmark it or it gets lost in my endless sea of bookmarks. So what do you do to get around this? This is the question that I was asking myself at the end of 2010. How can I get my Silverlight code organized? My requirements for a snippet manager were: Needs to be FREE. An easy way to view XAML/C# code behind together in one “view”. I wanted the ability to store the code snippets in cloud in case my HDD dies. Searchable Keywords to quickly find code snippets. I started looking for a snippet manager that would allow me to do just that and finally found Snippet Manager. Before going any further, I think that one of the most important things to note here is that this software supports 37 languages. It’s not just for Silverlight developers nor C# only guys. The software supports Java, SQL and even COBOL.   Below is a screenshot of the Snippet Manager that shows my Silverlight code snippet. You will notice that I have highlighted two sections. The top part is my XAML and the bottom is my C# code behind. I’ve included a sample below of my code snippets so that you can get an idea of how I organized it. Another thing that’s great about this software is that it supports plain text. I added some connection strings in the TEXT section below.  Once you have finished adding your code snippets, you can store them in the cloud. I created a FTP directory called “snippets” on my FTP Server and hit the upload button once I am finished adding my new codes snippets. This will allow me to use the code snippets on another computer with this application on my USB Key. See screenshots below: Enter your FTP credentials below: Hit the Uploads button on the Toolbar: Login in to your FTP Server and verify the following files are now on the FTP Server: Another great feature of the Snippet Manager is that you can also integrate this into VS2010 by clicking Tools –> External Tools: And setting up your External Screen to point to the Executable: You can now launch it by going to Tools –> Snippet Manager. If you want you could also a shortcut to launch the program with HotKeys. As you can see, this is a nice little program that includes everything needed to organize your code snippets very clean. I didn’t go over every feature but this is something that you might want to download and give it a shot.  Subscribe to my feed CodeProject

  Read the article

• Yum update not working on CentOS 6.2 minimal install

  - by Owen

  Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

  Read the article

• Xorg server won't start after fresh install of Debian 5.04, screen goes blank (Intel Atom D510(Pinet

  - by Kamil Zadora

  Hello, I have installed Debian 5.04 Lenny on my new Intel D510MO motheboard. I fixed some issues with incorrect drive mapping (for some reason during installation my hdd was on sdb, after a restart it is under sda - fixed in grub), and now I am struggling with getting graphical enviroment up and running, I installed the graphical enviroment using the Debian installer. I am not an linux expert by any means, I assume that I need to edit the xorg.conf file. Any hints appreciated! UPDATE1: No change after dpkg-reconfigure xserver-xorg Here is my current xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "pl" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection UPDATE2: I have installed vnc4server package. I can connect over vnc from my windows 7 laptop and i see empty desktop with terminal window open. Seems that the xserver and gdm are running but they cant talk with my GPU. I am not sure if a can use any gui tool to configure it overthe vnc, as all I see is the terminal window, no taskbars etc. UPDATE3: My current Xorg.0.log http://pastebin.pl/18918 The graphic chipset integrated into the D510 processor is Intel 945GC

  Read the article

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• DVD-ROM: Pioneer DVD-115GA not being detected.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 2.00 GHz / 2 x 512 MB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So this computer is actually an upgraded EMachines T2482. I found a used DVD-ROM for cheap... the Pioneer DVD-115GA. I originally had a plain DVD Reader (Lite-On XJ-HD166S) which was quite useless. So I basically did a simple swap of the drive and powered up the computer. The drive could open and close, and I put in a DVD and it was spinning, but no detection. Going into the BIOS, the drive was not detected. (The IDE cable connecting the DVD-ROM is connected to the CD-ROM below it and then attached to the secondary IDE port on the motherboard.) So I started all the way up and tried to scan for hardware changes in Computer Management. Still, nothing. I have the software downloaded from the Pioneer site, and that couldn't detect anything. So what else can I try to hopefully get my DVD-ROM recognized by the BIOS? Thanks in advance!

  Read the article

• Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

  - by kellax

  I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >