I have a physical SLES 11 SP2 server on a Sun Fire x4140 that is giving me problems with networking upon reboot. The NICs are onboard.
The networking appears successful during boot, but network services such as nfs fail hard. This is because eth0 and eth1 are both receiving the same configuration and are both ifup-ed. Once everything times out and I'm at the console, ifconfig shows that eth0 and eth1 are UP and running with the same IP. Attempting to ping anything in that subnet fails. Restarting the network service fixes the issue.
eth0 is the correct NIC that should be configured as primary, per the MAC address.
Question: Whats causing eth1 to be brought up with the same config as eth0??
I do not have a config script set up for eth1:
banjer@harp:~> ls -la /etc/sysconfig/network/
total 104
drwxr-xr-x 6 root root 4096 Jun 11 12:21 .
drwxr-xr-x 6 root root 4096 Apr 10 09:46 ..
-rw-r--r-- 1 root root 13916 Apr 10 09:32 config
-rw-r--r-- 1 root root 9952 Apr 10 09:36 dhcp
-rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth0
-rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth3
-rw------- 1 root root 172 Feb 1 08:32 ifcfg-lo
-rw-r--r-- 1 root root 29333 Feb 1 08:32 ifcfg.template
drwxr-xr-x 2 root root 4096 Apr 10 09:32 if-down.d
-rw-r--r-- 1 root root 239 Feb 1 08:32 ifroute-lo
drwxr-xr-x 2 root root 4096 Apr 10 09:33 if-up.d
drwx------ 2 root root 4096 May 5 2010 providers
-rw-r--r-- 1 root root 25 Nov 16 2010 routes
drwxr-xr-x 2 root root 4096 Apr 10 09:36 scripts
On a side note, eth3 is also configured with an IP in a different subnet, but this has not posed any problems. FYI the kernel module being used is forcedeth.
banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='172.21.64.25/20'
MTU=''
NAME='MCP55 Ethernet'
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
ONBOOT="yes"
Here's eth3 in case you need to see it:
banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth3
BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='172.11.200.4/24'
MTU=''
NAME='MCP55 Ethernet'
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
ONBOOT="yes"
Perhaps is something related to udev? 70-persistent-net-rules looks OK to me, but I may not understand it completely.
banjer@harp:~> cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x10de:0x0373 (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
# PCI device 0x10de:0x0373 (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x10de:0x0373 (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x10de:0x0373 (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"
# PCI device 0x1077:0x3032 (qla3xxx)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:c1:dd:0e:34:6c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"
Any other thoughts on what would cause this?
