Search Results

Search found 29194 results on 1168 pages for 'network settings'.

Page 109/1168 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • Mapping printers using Group Policy Preferences; works on Windows XP, not on Windows 7 x64

    - by Graeme Donaldson
    I'm trying to use Group Policy Preferences to manage user connections to shared printers. The print server is Windows Server 2003 R2 Std edition. Several printers are installed, and I've added x64 editions of all the drivers to the print server as well. I've created a new GPO containing the printer preference settings. Printer mappings are targeted based on AD security group membership. I log on to a Windows XP PC with the Group Policy CSEs installed and the printer maps perfectly. I log on to a Windows 7 x64 PC and it doesn't map. If I manually connect to the shared printer, I get a prompt which asks me to confirm if I trust the server before installing the driver, and then it works perfectly. I have domain admin rights and my UAC settings have not been changed from the default, i.e. UAC is enabled and the default level is selected. Is the printer mapping failing because it's unable to prompt me to install the driver, or is there something else afoot?

    Read the article

  • Wireless to Wireless Transfer Slow on a Linksys WRT54GL

    - by Kyle Brandt
    The Situation: When I try to transfer a file from one computer to another that are both connected via wireless on a WRT54GL (in a office) with dd-wrt firmware I often get bad speeds. In generally they average around 100 kilobytes a second. Either computer can download via wireless from the Internet at at about 2 megabytes a second. The speed is slow with the transfer of one large file. There are about 20 other wireless networks that the computers can see, so there is a lot of noise, but I don't have the equipment to really monitor the frequencies well. But that still seems pretty slow. I thought maybe it was the transmit on each card, but even when they are 5 feet away with a line of sight I still get these speeds. According to Linux both cards are operating at 54g. My Questions: Is this normal for this sort of consumer level wireless equipment? Anything I can do to improve it? why is wireless to wireless transfer slow when everything else isn't? Whats steps might I take to figure out what is happening? For example, are lots of packets not making to the access point requiring retransmissions? Above all, I want to find out what the problem actually is. This may seem odd, but at this point I am more interested in understanding what the problem is than fixing it. What I have tried: I have tried messing with lots of settings. Different channels, xmit power, G-Only, none of which has made anything any better. I've also tried upgrading to newer dd-wrt firmware version and doing a reset to wipe out the settings.

    Read the article

  • Ubuntu Laptop as a wireless hotspot on bridge mode

    - by nixnotwin
    I have a wired router to which my ubuntu laptop connects via ethernet. The wierless NIC of the laptop acts as a wireless hotspot on master mode. I use hostapd fo this. I have bridged eth0 and wlan0, so my wireless clients that connect to my laptop over wifi get ip from the wired router via dhcp, so the devices get registered at the wired router ( and the laptop is just an access point). I use the following commands to get my laptop+accesspoint working: sudo brctl addbr br0 sudo brctl addif br0 eth0 sudo hostapd /etc/hostapd/hostapd.conf & sudo dhclient -d br0 & sudo ifconfig wlan0 192.168.1.15 netmask 255.255.255.0 up sudo brctl addif br0 wlan0 These commands enable me to access internet on my wireless clients and also on the laptop which is acting as wireless accesspoint. But if I reboot the wired router (without rebooting the laptop that is acting as accesspoint), Internet access on the laptop+accesspoint gets lost, but on wireless clients it works fine. Even I have not been able to figure out a command which will reset the laptop interfaces to default settings, so everytime the router reboots, I have to reboot the laptop too to get into default settings so that I can re-enter the above mentioned commands. My first question is How can I have my bridge+accesspoint up and running even-though the router reboots? And is there a command to set the interfaces to a default state? (ifdown -a doesn't work, after issuing the command the bridge still remained).

    Read the article

  • Ubuntu Laptop as a wireless hotspot on bridge mode

    - by nixnotwin
    I have a wired router to which my ubuntu laptop connects via ethernet. The wierless NIC of the laptop acts as a wireless hotspot on master mode. I use hostapd fo this. I have bridged eth0 and wlan0, so my wireless clients that connect to my laptop over wifi get ip from the wired router via dhcp, so the devices get registered at the wired router ( and the laptop is just an access point). I use the following commands to get my laptop+accesspoint working: sudo brctl addbr br0 sudo brctl addif br0 eth0 sudo hostapd /etc/hostapd/hostapd.conf & sudo dhclient -d br0 & sudo ifconfig wlan0 192.168.1.15 netmask 255.255.255.0 up sudo brctl addif br0 wlan0 These commands enable me to access internet on my wireless clients and also on the laptop which is acting as wireless accesspoint. But if I reboot the wired router (without rebooting the laptop that is acting as accesspoint), Internet access on the laptop+accesspoint gets lost, but on wireless clients it works fine. Even I have not been able to figure out a command which will reset the laptop interfaces to default settings, so everytime the router reboots, I have to reboot the laptop too to get into default settings so that I can re-enter the above mentioned commands. My first question is How can I have my bridge+accesspoint up and running even-though the router reboots? And is there a command to set the interfaces to a default state? (ifdown -a doesn't work, after issuing the command the bridge still remained).

    Read the article

  • Network Error: no buffer space available

    - by braindump
    After some time of running fine, one of our Windows XP SP3 machines does not open some(!) new TCP/IP connections anymore. Putty says "Network Error: no buffer space available", IE won't open any new connections but e.g. network drive mappings still work, even new ones can be established. netstat does not show more open connections that usual, ping and dns lookups work fine. Any hints?

    Read the article

  • Windows 7 allow pinning exe on network share to taskbar

    - by petebob796
    I am just configuring my new Windows 7 work machine and have discovered that I can't pin an exe on a network drive to the taskbar. Are there any work arounds to this e.g. Registry Edits. I can understand the reasoning it's not allowed by default for newbies as the network location may later not exist but I am certain it always will.

    Read the article

  • How to connect a Bluetooth network connection using the command line

    - by edg
    I can enable a Local Area Network interface for my machine with the command netsh interface set interface "Local Area Connection" ENABLED Is there an equivalent command to connect a bluetooth network connection? I've tried netsh interface set interface "Bluetooth" ENABLED but it seems to have no effect, the connection remains disconnected. I also tried netsh interface set interface "Bluetooth" connect=CONNECTED but this returns One or more essential parameters not specified

    Read the article

  • Snort network instruction Mac OS X

    - by Rasatavohary
    I'm trying to learn network intrusion detection. When I try to launch Snort, in IDS mode, I get this message (I'm running Mac OS X): Initializing Network Interface en1 ERROR: OpenPcap() FSM compilation failed: syntax error PCAP command: snort Fatal Error, Quitting.. How can I fix this problem?

    Read the article

  • SMB from fedora 12 to windows network

    - by Jean
    Hello, I got Fedora 12 samab and samba client and permitted the same via the iptables. For some reason, I cannot seem to browse my windows network. What did I do wrong, and how can I achieve this. Thanks Jean [edit] - I want to browse the windows workgroup [edit] - Set the workgroup name, restarted the smb in the services, can browse network, but only my fedora 12 system is being shown

    Read the article

  • SMB from fedora 12 to windows network

    - by Jean
    Hello, I got Fedora 12 samab and samba client and permitted the same via the iptables. For some reason, I cannot seem to browse my windows network. What did I do wrong, and how can I achieve this. Thanks Jean [edit] - I want to browse the windows workgroup [edit] - Set the workgroup name, restarted the smb in the services, can browse network, but only my fedora 12 system is being shown

    Read the article

  • Virtual Network Interface and NAT disables localhost access for MySQL and Apache

    - by Interarticle
    I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

    Read the article

  • Best Practise: DNS and VPN (with private network IPs)

    - by ribx
    I am trying to find the best solution for my DNS problem. We are running several services in our company that you can reach only over VPN. Other services, that are reachable through the internet got the domain ... At the moment all services inside the VPN network go by .local... These have an VPN IP of the private network 192.168.252.0/24. Clients reach from Linux over OSX to Windows. I can think of 4 possibilities to implement a DNS infrastructure: Most common: an internal DNS Server, that is pushed by the VPN. But this has several drawbacks: your DNS responses are limited to the speed of the VPN Connection and your own DNS server. Because of very complex websites, this can increase the time for a page to load quite a lot. Also: we have several VPNs that are not connected to each other and all of them have their own DNS server. Several DNS servers locally. These have to be configured by hand. And you have to use some third party tool like dnsmasq. If you start a DNS request, you ask your locally running DNS server, which decides which server to ask for which domain name. One college of mine uses such a solution with this OSX (I am sorry, I don't remember the name of the application). You use your domain hoster. Most of them have APIs available to manipulate your DNS entries. So you could pull your private network informations to your domain hoster. I am not sure whether they all accept private network IPs. But I guess there will be some problems in the same way as in number 4. The one we currently use, because it's for us the most logical choice: we forward the sub domain *.local.. to our own public DNS Server. This works quite good for some public DNS Servers like Google. But most ISPs do not forward the answers. Or don't do that always. Like my ISP sends me a positive result of the a DNS request of a *.local.. domain only every 10th time I make a nslookup. (Can someone explain this?) Here the real Question: Is there another solution we were not thinking about? Or: What of these methods do you use?

    Read the article

  • Windows XP Network installation from Linux server ( RHEL 5)

    - by Kumar P
    How can i make network installation ( for install Windows XP ) from Linux ( RHEL 5 Server ) ? There is option in linux server to install client machine with linux by network installation. As same as windows server have option to install client machine with windows operating system. Now i want to know steps for linux server (RHEL5) to install client machine with windows operating system (Windows XP) *sorry for poor english

    Read the article

  • No network connectivity for my CentOS 6 installed in VMWare Fusion in MacOSX Lion

    - by gilzero
    I installed CentOS 6.2 (CentOS-6.2-x86_64-minimal.iso) with VMWare Fusion(Version 4.1.2). (Not with EasyInstall). I am using MacOSX Lion, connect to internet via WIFI. The centos installed does not have network connectivity. *How may I configure it to connect to wifi? * Thanks for any help. Below is screenshot of ifconfig: With the setting Network Adapter, I tried both NAT and Bridged WiFi.

    Read the article

  • Sysinternal's Process Explorer v14 doesn't show network activity.

    - by MikMik
    The new version of Process Explorer shows network activity history, but it doesn't in one of my computers. This particular PC runs Windows XP SP3 and it has just been reformatted so everything is "fresh". I have even installed WinPCap and Microsoft Network monitor, in case some of these drivers were necessary, but the graph stays in 0. Any ideas why this could happen? I would ask in Sysinternal's forum, but I really don't want to register in yet another forum.

    Read the article

  • What is Allow multicast from Broadband Network?

    - by PeanutsMonkey
    If a wireless modem router has the option Allow multicast from Broadband Network, what does this mean exactly? What risks are there to leaving it enabled and why would you have it enabled? I understand that a broadcast is sending a packet to every device on the network and a multicast is send a packet to a specified set of addresses. A multicast packet can cross routers whereas a broadcast cannot although I don't quite understand how these "set of addresses are specified"

    Read the article

  • Intermittent internet access on a flat network - Router is connected

    - by Naveed
    I’m looking for some help with network settings. I’ve just started a new job (non-IT!) and we have problems with our office network. I’m the most IT literate in the organisation (15 permanent employees) and so have been dealing with IT issues. Our main bit of software is web-based so we need constant web access but it sometimes goes down for between 20 minutes and 3 hours despite everything seemingly working fine. It’s a flat network with wireless APs, BT Business Broadband 8Mbit connection and that’s about it. We have no servers and no standard settings and staff are encouraged to bring in their own laptops and connect! The network basically exists to provide internet access and that’s it. We also have students accessing the wireless (and I know there’s a whole list of access and content issues etc but right now we just need internet access stabilised). This is what we have: Building 1 Cisco SLM-224P 24-port PoE 10/100 switch with 2 gigabit ports 3 x ZyXEL NWA-3160 wireless APs Samsung OfficeServ 7100 phone server which borrows the building’s wiring Building 2 Netgear GS605-UK 5-port 10/100/1000 switch 1 x ZyXEL NWA-3160 wireless AP 1 x BT Business Hub – 2wire BT2700hgv – is the DHCP server We have 2 link cables between the buildings. One connects the two switches on a gigabit port. The second (oddly) connects the switch in building 2 to the OfficeServ server in building 1. When the internet goes down I can still access the router through a wireless connection. I can also ping websites and get a response. Firefox just says “Cannot connect” etc. The system then heals itself when it feels like it. (Sorry if this is asking too much but) These are my immediate questions… Why would browser-based internet go down? I don’t know enough about protocols etc but I can try to standardise settings. The WAPs have a DNS server setting and I don’t know whether it should be “None” or “From DHCP”. What should be the DHCP server? The router or the Cisco switch? Or something else?! Would there be any problem in connecting the second link from switch to switch? Is that good practice? Is it worth swapping the Netgear GS605 with either a Cisco SG200-08 or Netgear GS108T-200? Is it worth upgrading the router to, for instance, a Cisco RV042G Dual Gigabit router which would also act as a switch? Or is it better to have a separate router and switch in Building 2?

    Read the article

  • Using wireless interface in guest OS with bridged network in VMware fusion 3

    - by Chetan
    I'm running Ubuntu in Snow Leopard with VMware fusion 3, and I want to be able to access the wireless network on eth1 within Ubuntu so I can run tools like aircrack-ng. However, the bridged network that VMware sets up connects my Airport interface in Mac to the wired interface eth0 in Ubuntu. How do I set it up so that the Airport interface is connected to the wireless interface eth1 in Ubuntu?

    Read the article

  • Windows 7 Forbid connecting to a specific wireless network

    - by Elliot
    Does anyone know how to tell windows 7 to bar a wireless network? It keeps logging into a random open one with no bandwidth my neighbors have instead of the good one we have here. I keep unchecking "automatically log in if available" and it keeps re-checking itself. I want it to NEVER log into this network no matter what without manual intervention. I do not want to disable auto connecting, just tell it "do not ever connect to this one without my express permission".

    Read the article

  • No wireless networks found - BackTrack 5 - Wicd Network Manager - VmWare

    - by litlmike
    I have a Lenovo T500 laptop with an Intel(R) WiFi Link 5100 AGN I have Win 7 Enterprise installed as the OS Inside that Win 7 install, I have installed VmWare Workstation (8.0.0 build-471780) Inside the VmWare, I have installed BackTrack 5 (BT5r1-GNOME-64) Under the VmWare settings, I have Bridged Mode Enabled for the Network Adapter In BT5r1-GNOME-64, under the Wicd Network Manager, it says "No wireless networks found" What do I fix so that it can find the wireless networks? Is the issue with BackTrack, VmWare, etc.?

    Read the article

  • Windows Vista file permissions does not inherit when copying to a network share

    - by vdboor
    I've got a network share with specific permissions on a subfolder (e.g. access to developers and freelancers). A designer copied PNG files from his local system to the network share. These files didn't inherit the folder permissions, but only gave access to Administrators. Is this a setting somewhere to restrict access, and can it be avoided? The local system uses Vista, the server uses Windows 2003.

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >