Search Results

Search found 19382 results on 776 pages for 'multiple'.

Page 110/776 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Active Directory - Using GPO To Update Multiple Versions Of .NET

  - by Joe Wilson

  OK, I have searched everywhere for this one. I have all the MSI's and packages I need to deploy .Net 3.5 SP1, and 2.0 and 3.0 (which are prerequisites for 3.5). I can't figure out how to install all of them at once via GPO. Basically, the computers on the network do NOT have any version of .Net installed, and I need them to be at 3.5 SP1. I know I can deploy each version via GPO, force reboot the client, then push the next one, force reboot, and so on. Is there a way to streamline install all 3 at once via GPO? Thanks

  Read the article

• Enable multiple audio output on Windows 7

  - by patrick

  For Windows 7, 64 bit: I have a digital SPDIF output to my stereo, which controls speakers in other rooms. I also have a set of speakers connected to the regular audio jack at the computer. This allows me to send music to the kitchen while my child plays games on the computer. Works great. Except when I'm playing games and still want to listen to music. ;-D I know I can manually switch WMP to play through the speakers instead of SPDIF, but I was wondering if there's any way to enable simultaneous audio out in Windows 7? Virtual Audio Card is a non-starter because I'm running 64 bits and the VAC driver isn't signed.

  Read the article

• How to host multiple FLEX applications in IIS7

  - by Devtron

  Hello, I manually deploy a FLEX application to my web server (IIS 7). There are two virtual directories, 1.) Default 2.) myFlexApp1. myFlexApp1 is where my working FLEX application resides. I now need to deploy a different FLEX application (let's call it myFlexApp2) to the same web server. I set up a virtual directory for [myFlexApp2] and it complains about the "bindings" using port 80, which is already used by [myFlexApp1]. I have tried to give them separate host names in their bindings properties. For example, myFlexApp1.mydomain.com and myFlexApp2.mydomain.com. I can never get [myFlexApp2] to show from an external browser. I was able to get only one or the other to display, but never could run both. Here is what I need: myFlexApp1.mydomain.com -- myFlexApp1 calendar.mydomain.com -- myFlexApp2 test.mydomain.com -- myFlexApp1 where test.mydomain.com is the default URL. Is this possible? What am I doing wrong? I even tried to edit the hosts file in [C:\Windows\System32\drivers\etc] but that didnt work either. How can I serve up two FLEX applications on IIS 7? It shouldn't be this hard!

  Read the article

• Search in multiple xml files

  - by Ram

  I have a windows Xp Sp2 system where the windows explorer search is not able to find the text in xml files. Is there some setting that enable the search in xml files? It finds in text in text / doc files in the same folder.

  Read the article

• L2TP and multiple interfaces on the machine

  - by Alex

  We have setup ipsec and l2tp on linux. One question came up (due to firewall management policy) is whether it's possible to have 1 virtual interface instead of one per connected client. Now we have: ppp0 serverip clientip1 ppp1 serverip clientip2 Want to have: l2tp_tun serverip serverip like with OpenVPN's tun interfaces and then to be able to push IP address and route to each client.

  Read the article

• Multiple foldmethods in vim

  - by bjarkef

  I use the folding option of vim quite a lot, and have usually set foldmethod to syntax. Recently I discovered that it is possible to add custom folds, such that I can put whole blocks in /*{{{*/ and /*}}}*/ which is very useful for grouping large sections of a source file together. However to use that feature I need to set foldmethod to marker, and I loose the syntax folding. Is it possible to have two active foldmethods at the same time in vim? set foldmethod=syntax,marker does not work.

  Read the article

• Search in multiple xml files

  - by Ram

  I have a windows Xp Sp2 system where the windows explorer search is not able to find the text in xml files. Is there some setting that enable the search in xml files? It finds in text in text / doc files in the same folder.

  Read the article

• Pin same app multiple times in Windows 7

  - by Mr. Shiny and New ??

  I use some programs with command line arguments and like to have shortcuts for launching those programs with those arguments. For example, I keep several Firefox profiles around and like to specify the profile name on the command line. Similarly I have several Eclipse shortcuts with a command line argument specifying the workspace to open. I would like to be able to pin these shortcuts to the start menu or taskbar in Windows 7. The problem I have is that once I've pinned one of these, no other shortcuts which launch the same exe can be launched. I'm also open to suggestions such as a suitable desktop gadget which can contain a bunch of arbitrary shortcuts, yet remain in a fixed position on my desktop somewhere, or some way of adding a secondary taskbar (this was possible in XP).

  Read the article

• Session persistence between multiple Rails / Unicorn servers with Redis as session_store on AWS

  - by d_ethier

  I've got 2 nginx EC2 instances pointing to 2 Unicorn EC2 instances in a round robin load balanced configuration. The two nginx instances are being the Elastic Load Balancer. Both Unicorn instances have a Redis session_store configured which is in a master/slave configuration with an Elastic IP attached to the master. I've tried configuring the session stickiness on the load balancer, but sessions are lost on each page refresh. I'm using the redis-store gem for the session_store configuration and redis support. Anyone have any ideas as to why this is not working?

  Read the article

• Connect to multiple proxy server

  - by mostafa

  my company share internet through two proxy server. without enterning proxy detail in program such as firefox, I don't have any access to internet. each proxy server bandwidth limit is 512kbps. how can i combine two proxy server traffic to get 1mbps bandwidth? client sucsh as proxifier chain both proxy but only use one of them at a time. if one failed to connect, proxifier connect to other proxy in the chain list.

  Read the article

• Port mirroring on multiple switches

  - by Matt

  So here is the deal, I have a server on switch A where port 3 is monitoring traffic for most of the ports on switch A. However I have other users on switch B that needs to have port 3 on switch A monitor as well. Is this possible? I have been reading about rspan but doesnt seem to work. Switch A: monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 (this works great for switch A, I need a solution to get switch B to also have some ports sent to port 3 on switch A for monitoring.) Onxx, All the traffic on switch A is fine, there will be about 10-15 ports on switch B that I need to send to fa0/3 on switch A as the destination. I have the switches connected with a ethernet cable with a trunk port on both switches on port 48 on switch B and A and port 47 on A connects to our sonicwall. So I am assuming they are daisy chained? What if I did the following: Switch A monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 Put all of the ports on vlan 10 because I made an rspan vlan 10 On switch B monitor the ports I need will say 1-10 monitor session 1 source interface fast0/1 - 10 monitor session 1 destination remote vlan 10 as a prerequisite I would have created vlan 10 as a rspan vlan on switch B. Switch A Monitor session 1 destination remote vlan 10 Would this work? By the way I am working with cisco catalyst 3560 switches.

  Read the article

• Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

  - by Synetech

  I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

  Read the article

• mount multiple folders with nfs4 on centos

  - by microchasm

  I'm trying to get nfs4 working here. Machine 1 (server) I have a folder and in it 2 other folders I'm trying to share independently. /shared/folder1 /shared/folder2 Problem is, I can't seem to figure out how to mount the folders independently on the client. (Machine 1 - server) /etc/exports: /var/shared/folder1 192.168.200.101(rw,fsid=0,sync) /var/shared/folder2 192.168.200.101(rw,fsid=0,sync) ... exportfs -ra (Machine 2 - client) /etc/fstab: 192.168.200.201:/folder1/ /home/nfsmnt/folder1 nfs4 rw 0 0 ... mount /home/nfsmnt/folder1 mount.nfs4: 192.168.200.201:/folder1/ failed, reason given by server: No such file or directory The folder is there. I'm positive. I think there is something simple I'm missing, but I'm totally missing it. It seems like there should be a way in fstab to tell nfs which folder on the server I want to mount. But I can only find references to what looks like a root mount point (e.g. 192.168.1.1:/) which I assume is handled by exports on the server. But even with the folders set up in exports, there doesn't seem to be an apparent way to pich and choose which gets mounted. Is it not possible to mount separate folders from the same server to different mount points on the client? Any help appreciated.

  Read the article

• Printer offline until spooler service is restarted multiple times

  - by Zian Choy

  When I try to print from my ThinkPad to a printer shared through a Windows 7 Homegroup hosted by a desktop computer, I often have to restart the Print Spooler service several times before the job will go through. In particular, this problem occurs when the desktop is in sleep mode when the print job is started and then brought out of sleep mode after the print job has been kicked off. Both computers are running Windows 7 32-bit edition with the latest patches. I have tried the following with no improvement: SNMP registry hack (see MS KB for details) Following the instructions in a blog post entitled "Sharing Printers on Vista 64-bit" Looking at Printer offline until spooler service is restarted

  Read the article

• Wireless router bandwidth with multiple clients.

  - by ULTRA_POROV

  Suppose a wireless router has a bandwidth of 54 mbs. Does this mean that 2 clients (pc's) that are connected to the router can both transfer data at 54 mbs simultaneously or will the bandwidth be spitted equally among them (27mbs each)?

  Read the article

• kvm-over-ip, multiple machines per cable run

  - by Sirex

  I'm looking at getting a kvm-over-ip setup for a server room. Typically these devices have 16 or so cat5 leads that come out of them and then a convertor that converts each cat5 into a vga & ps2 pair. Can you run one cable from the unit into a switch, and then leads from the switch into each machine ? I have several machines on the other side of the server room that i'd like to have avaliable but i dont want to run 16 cables to them. I'm thinking this should be possible being IP layer and all, but as each device normally has its own cable out the back of the kvm unit i'm not certain. Perhaps the kvm's rear ports act essentially like a switch anyway in which case it should work, or perhaps if i run all 16 cables into a seperate switch right next to it and aggregate the ports together, run one cable to a switch on the other side of the room with similar number of ports agregated together, then use that switch to plug each macine into ? I'm fairly sure this is possible, but i just want to check before i shell out the cash as i've never tried it.

  Read the article

• Permissions in OS X for iTunes library with multiple users

  - by John

  I currently have a lot of music on an external drive and my iTunes set up from there. However, periodically, when the external drive isn't connected, iTunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my Mac's HD is large enough to house the music collection. However, I have 4 family members – all with their own logins – using this same gob of music. I don't want four copies of the library, only one with all libraries referencing it. So, what I want to do is: Move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. Get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let iTunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the iTunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any XML library file editing if possible. Am I dreaming?

  Read the article

• Passing multiple sets of arguments to a command

  - by Alec

  instances contains several whitespace separated strings, as does snapshots. I want to run the command below, with each instance-snapshot pair. ec2-attach-volume --instance $instances --device /dev/sdf $snapshots For example, if instances contains A B C, and snapshots contains 1 2 3, I want the command to be called like so: ec2-attach-volume -C cert.pem -K pk.pem --instance A --device /dev/sdf 1 ec2-attach-volume -C cert.pem -K pk.pem --instance B --device /dev/sdf 2 ec2-attach-volume -C cert.pem -K pk.pem --instance C --device /dev/sdf 3 I can do either one or the other with xargs -n 1, but how do I do both?

  Read the article

• Persistent PuTTY sessions for multiple windows

  - by Tgr

  I'm working in various Linux environments through PuTTY connections which break from time to time. I'm looking for a solution to make the PuTTY windows persist (e.g. if I was editing a file, then after reconnecting I should be in the same editor with the same file open at the same place), with the following requirements: it shouldn't require any manual setup at the beginning of the session or after reconnection (I don't want to type in screen or anything like that) I have several windows open to the same machine with the same user, which tend to disconnect at the same time the number/role of windows is not constant (it's not like I have an mc window, a mysql window and a "script runner" window; sometimes I use one window for search or for SVN commands, other times I need several at the same time) sometimes I need to change the properties of the windows for a task (large window for grepping/editing, small windows because I need to see two of them at the same time, red background because I am modifying the live database in MySQL etc), so I need to get the same console back in the same window after a reconnect Is there a way to achieve this? I suppose I should use screen or something equivalent, but how does it know which window I am reconnecting from? Is there some way to pass a unique window identifier to the shell from PuTTY?

  Read the article

• VMware - Watching multiple virtual machine screens

  - by mr.b

  Hi, I don't know even if I put the question right, but here's what I'd like to accomplish. I have avoided specifying exact Vmware virtualization product here because I'm not sure which one would be most suitable for the task at hand. I am developing an application that works in local network. This application has to run on several computers at the same time, and it's important to me, as a developer and tester, to see (literally) how it behaves at all times on all computers. Is there any way to connect to screens of virtual machines deployed on ESX, ESXi, Sever 2.0, or some other product, so that I can see something like grid of screens, say 4x4 or 6x4 or whatever number of scaled screens, at the same time? Ability to interact with screens directly from grid (by double-clicking a screen, for instance, and then getting full resolution screen) would be greatly appreciated, of course. I hope that someone understood what I meant here. :)

  Read the article

• nginx multiple domain virtual host configuration

  - by Poe

  I'm setting up nginx with multiple domain or wildcard support for convenience sake, rather than setting up 50+ different sites-available/* files. Hopefully this is enough to show you what I'm trying to do. Some are static sites, some are dynamic with usually wordpress installed. If an index.php exists, everything works as expected. If a file is requested that does not exist (missing.html), a 500 error is given due to the rewrite. The logged error is: *112 rewrite or internal redirection cycle while processing "/index.php/index.php/index.php/index.php/index.php/index.php/index.php/index.php/index.php/index.php/index.php/missing.html" The basic nginx configuration I'm currently using is: ` listen 80 default; server _; ... location / { root /var/www/$host; if (-f $request_filename) { expires max; break; } # problem, what if index.php does not exist? if (!-e $request_filename) { rewrite ^/(.*)$ /index.php/$1 last; } } ... ` If an index.php does not exist, and the file also does not exist, I would like it to error 404. Currently, nginx does not support multiple condition if's or nested if so I need a workaround.

  Read the article

• VLC Dynamic Range compression multiple songs

  - by Sion

  In my collection of music I have some songs which seem to be compressed nicely. But in addition to those I have songs which are overly quite compared to the louder compressed songs. So maybe the problem isn't compression but average volume. Would the Dynamic Range Compressor in VLC work for this type of problem or would I have better luck using external speakers and running it through a guitar compressor?

  Read the article

• Port forwarding with multiple IP's

  - by Jon

  I work at a company which uses a Fortigate 60 router, something I'm not really familiar with. Everything worked fine with it until a week ago when Comcast came in and replaced our modem. It seemed as though the process went smoothly - our connection came back up and our static IP remained the same. However, none of our port forwarding is working. What has me confused is the Comcast modem apparently has two IP addresses. The WAN2 interface for it in the Fortigate router is set to 10.1.10.10. However, all of our port forwarding settings are set to an external IP address of 10.1.10.50. Now this setup used to work fine, so something with the Comcast modem must have changed. How can I find out what? I tried setting a computer to a local IP of 10.1.10.15 so I could open up the web interface for the modem, but I can't even ping 10.1.10.10 when I do that. Any ideas? Thanks!

  Read the article

• Adding Multiple Interfaces to EC2 Ubuntu 12.04

  - by nocode

  I have a m1.medium Ubuntu 12.04 instance with two ENI's. I have a VPC setup with a private and public subnet. Private: 10.50.1.0/24 Public: 10.50.101.0/24 I initiated the instance on the private subnet. I configured a NAT instance and route all servers in the private subnet internet access. The route tables on the private subnet point towards the NAT instance and the route table on the public subnet point to the internet gateway. I am trying to add a public interface on the machine so that I can put it behind a ELB. When I added the second ENI and configured a static IP in /etc/network/interfaces and restarted the network services, I can no longer access from the Public subnet to the Private Subnet. Works Private private Private public Does not work Public private From Public Private, I ran a TCPDUMp on the private machine and can see the request coming in. My guess is it's trying to route over the new Public interface instead of the Private. Here's my route: default 10.50.1.1 0.0.0.0 UG 100 0 0 eth0 10.50.1.0 * 255.255.255.0 U 0 0 0 eth0 10.50.101.0 * 255.255.255.0 U 0 0 0 eth1 My networking knowledge is limited and I believe I have to add some routes but unsure of what command/syntax needs to be.

  Read the article

• Multiple OS on a single machine

  - by Veejay

  I have a new harddrive. I want to install XP, Vista and Windows 7 on it Is it possible and what should be the order. I have heard there is some MBR rewriting issue? Any 'simple' article/tutorials are welcome

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >