Search Results

Search found 13256 results on 531 pages for 'password policy'.

Page 110/531 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

  • Protect all XML-RPC calls with HTTP basic auth but one

    - by bodom_lx
    I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

    Read the article

  • Apache Server not working in MAMP

    - by jasonaburton
    Here's what I did before the problem started: I was creating a database for a site that I am working on in phpMyAdmin. I wrote some code to try to connect to the database I just created and I couldn't connect. I assumed it might be because I needed a password to connect to the database, so I created a password for it. Immediately after I created the password phpMyAdmin kicked me out saying: "#1045 - Access denied for user 'root'@'localhost' (using password: YES)" "phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server." I found the php.ini file and searched for where I could change the password to match the one I just made, but couldn't find where I needed to change it. So I decided to scrap the database and uninstall MAMP from my computer and reinstall it hoping it would just reset all the defaults and I could go on my merry way. But now after reinstalling MAMP and trying to run the servers Apache won't start up and I have no idea why. One problem after another... Any advice or helpful ideas?

    Read the article

  • How do I remove encryption from a VMware Workstation 7 image?

    - by Chad
    I successfully encrypted a VM image and confirmed it still runs. I then closed the VM and reopened it and confirmed the encryption password was valid and worked. However, now I want to un-encrypt the VM. When I choose that option, it asks for "your password". I assume this means the password I created when I encrypted it. It doesn't work. I can still open the VM with the password and run it. But, it refuses to remove the encryption using that password. Am I missing something? Is there a password that I don't know about? Some details: I created this image (using standalone converter; physical machine source) I converted it to ACE Converted back to a normal VM (un-ACE'd it) Encrypted it Cannot remove the encryption but can open it and run it As you can see... I am exploring the VMware features. Thanks for any guidance you can give.

    Read the article

  • How to connect via SSH to a linux mint system that is connected via OpenVPN

    - by Hilyin
    Is there a way to make SSH port not get sent through VPN so when my computer is connected to a VPN, it can still be remoted in via SSH from its non-VPN IP? I am using Mint Linux 13. Thank you for your help! This is the instructions I followed to setup the VPN: Open Terminal Type: sudo apt-get install network-manager-openvpn Press Y to continue. Type: sudo restart network-manager Download BTGuard certificate (CA) by typing: sudo wget -O /etc/openvpn/btguard.ca.crt http://btguard.com/btguard.ca.crt Click on the Network Manager icon, expand VPN Connections, and choose Configure VPN A Network Connections window will appear with the VPN tab open. Click Add. 8. A Choose A VPN Connection Type window will open. Select OpenVPN in the drop-down menu and click Create.. . In the Editing VPN connection window, enter the following: Connection name: BTGuard VPN Gateway: vpn.btguard.com Optional: Manually select your server location by using ca.vpn.btguard.com for Canada or eu.vpn.btguard.com for Germany. Type: select Password User name: username Password: password CA Certificate: browse and select this file: /etc/openvpn/btguard.ca.crt Click Advanced... near the bottom of the window. Under the General tab, check the box next to Use a TCP connection Click OK, then click Apply. Setup complete! How To Connect Click on the Network Manager icon in the panel bar. Click on VPN Connections Select BTGuard VPN The Network Manager icon will begin spinning. You may be prompted to enter a password. If so, this is your system account keychain password, NOT your BTGuard password. Once connected, the Network Manager icon will have a lock next to it indicating you are browsing securely with BTGuard.

    Read the article

  • Why is ssh agent forwarding not working?

    - by J. Pablo Fernández
    In my own computer, running MacOSX, I have this in ~/.ssh/config Host * ForwardAgent yes Host b1 ForwardAgent yes b1 is a virtual machine running Ubuntu 12.04. I ssh to it like this: ssh pupeno@b1 and I get logged in without being asked for a password because I already copied my public key. Due to forwarding, I should be able to ssh to pupeno@b1 from b1 and it should work, without asking me for a password, but it doesn't. It asks me for a password. What am I missing? This is the verbose output of the second ssh: pupeno@b1:~$ ssh -v pupeno@b1 OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to b1 [127.0.1.1] port 22. debug1: Connection established. debug1: identity file /home/pupeno/.ssh/id_rsa type -1 debug1: identity file /home/pupeno/.ssh/id_rsa-cert type -1 debug1: identity file /home/pupeno/.ssh/id_dsa type -1 debug1: identity file /home/pupeno/.ssh/id_dsa-cert type -1 debug1: identity file /home/pupeno/.ssh/id_ecdsa type -1 debug1: identity file /home/pupeno/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 35:c0:7f:24:43:06:df:a0:bc:a7:34:4b:da:ff:66:eb debug1: Host 'b1' is known and matches the ECDSA host key. debug1: Found key in /home/pupeno/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /home/pupeno/.ssh/id_rsa debug1: Trying private key: /home/pupeno/.ssh/id_dsa debug1: Trying private key: /home/pupeno/.ssh/id_ecdsa debug1: Next authentication method: password pupeno@b1's password:

    Read the article

  • Protect all XML-RPC calls with HTTP basic auth but one

    - by bodom_lx
    I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

    Read the article

  • How To Disable Control Panel in Windows 7

    - by Mysticgeek
    If you have a shared computer that your family and friends can access, you might not want them to mess around in the Control Panel, and luckily with a simple tweak you can disable it. Disable Control Panel with Group Policy Note: This process uses Local Group Policy Editor which is not available in Home versions of Windows 7. Skip down below for the registry hack version that works on Home editions as well. First type gpedit.msc into the Search box in the Start menu and hit Enter. When Local Group Policy Editor opens, navigate to User Configuration \ Administrative Templates then select Control Panel in the left Column. In the right column double-click on Prohibit access to the Control Panel. In the next window, select Enable, click OK, then close out of Local Group Policy Editor. After the Control Panel is disabled, you’ll notice it’s no longer listed in the Start Menu. If the user tries to type Control Panel into the Search box in the Start menu, they will get the following message indicating it’s restricted. Disable Control Panel with a Registry Tweak You can also tweak the Registry to disable Control Panel. This will work with all versions of Windows 7, Vista, and XP. Making changes in the Registry is not recommended for beginners and you should create a Restore Point, or backup the Registry before making any changes. Type regedit into the Search box in the Start menu and hit Enter. In Registry Editor navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\Explorer. Then right-click in the right pane and create a new DWORD (32-bit) Value. Name the value NoControlPanel. Then right-click on the new Value and click Modify…   In the Value data field change the value to “1” then click OK. Close out of Registry Editor and restart the machine to complete the process. When you get back from reboot, you’ll notice Control Panel is no longer listed in the Start menu. If a user tries to access it by typing Control Panel into the Search box in the Start menu… They will get the following message indicating it is restricted, just like if you were to disable it via Group Policy. If you want to re-enable the Control Panel, go back into the Registry and change the NoControlPanel value back to “0” then reboot the computer. This comes in handy if you have inexperienced users working on your machine and don’t want them messing with Control Panel settings. Similar Articles Productive Geek Tips Disable User Account Control (UAC) the Easy Way on Win 7 or VistaStill Useful in Vista: Startup Control PanelRestore Missing Items in Windows Vista Control PanelHow To Manage Action Center in Windows 7New Vista Syntax for Opening Control Panel Items from the Command-line TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

    Read the article

  • Partner Blog: Hub City Media Introduces iPad Application for Oracle Identity Analytics

    - by Tanu Sood
    About the Writer:Steve Giovannetti is CTO of Hub City Media, Inc., a company that specializes in implementation and product development on the Oracle Identity Management platform. Recently, Hub City Media announced the introduction of iPad application IdentityCert for Oracle Identity Analytics. This post explore the business use cases and application of IdentityCert.Hub City Media(HCM) has been deploying certification solutions based on Oracle Identity Analytics since it first appeared on the market as Vaau RBACx. With each deployment we've seen the same pattern repeat time and time again:1. Customers suffering under the weight of manual access certification regimens deploy Oracle Identity Analytics (OIA) for automated certification. 2. OIA improves the frequency, speed, accuracy, and participation of certifications across the organization. 3. Then the certifiers, typically managers and supervisors, ask, “Is there any easier way to do these certifications offline?”The current version of OIA has a way to export certification data to a spreadsheet.  For some customers, we've leveraged this feature and combined it with some of our own custom code to provide a solution based on spreadsheet exports and imports.  Customers export the certification to Microsoft Excel, complete it, and then import the spreadsheet to OIA. It worked well for offline certification, but if the user accidentally altered the format of the spreadsheet, the import of the data could fail. We were close to a solution but it wasn’t reliable.Over the past few years, we've seen the proliferation of Apple iOS devices, specifically the iPhone and iPad, in the enterprise.  As our customers were asking for offline certification, we noticed the same population of users traditionally responsible for access certification, were early adopters of the iPad. The environment seemed ideal for us to create an iPad application to support offline certifications using Oracle Identity Analytics. That’s why we created IdentityCert™.IdentityCert allows users to view their analytics dashboard, complete user certifications, and resolve policy violations with OIA, from their iPads.The current IdentityCert analytics dashboard displays the same charts that are available in the Oracle Identity Analytics product. However, we plan to expand the number of available analytics in future releases.The main function of IdentityCert is user certification which can be performed quickly and efficiently using a simple touch interface. Managers tap into a certification, use simple gestures to claim users and certify their access.  Certifications can be securely downloaded to IdentityCert and can be completed with or without a network connection. The user can upload the completed certifications once they are connected to a cellular or wi-fi network.Oracle Identity Analytics can generate policy violation notifications based on detective scans of identity warehouse or via preventative analysis of identity access requests. IdentityCert allows users to view all policy violations, resolve, or delegate them to appropriate users. IdentityCert also analyzes the policy violation expression and produces more human friendly descriptions of the policy violation which improves the ability of users to resolve the violation. IdentityCert can be deployed quickly into a customer's environment. It is deployed with Hub City Media's ID Services to connect Oracle Identity Analytics securely with the iPad application.Oracle Identity Management 11g R2 is an important evolutionary release. Oracle's Identity Management suite has more characteristics of a cohesive platform. This platform provides an integrated set of identity services that can be used to protect, manage, and audit security within the enterprise. At HCM we take the platform concept a step further and see it as an opportunity to create unique solutions for Oracle Identity Management customers. IdentityCert is our commitment to this platform. You can download IdentityCert from the Apple iOS App Store today. It includes a demo dataset that you can use to explore the functions of the product without any server infrastructure. Download it. Give it a try. We would appreciate your interest and welcome any feedback.Resources:Press Release: Hub City Media Introduces iPad Application IdentityCert™ for Oracle Identity AnalyticsApp Store Download: http://bit.ly/IdentityCertOracle Identity Governance Suite

    Read the article

  • Insurers Pushed to Transform Their Business

    - by Calvin Glenn
    Everyone in the P&C industry has heard it “We can’t do it.” “Nobody wants to do it.” “We can’t afford to do it.”  Unfortunately, what they’re referencing are the reasons many insurers are still trying to maintain their business processing on legacy policy administration systems, attempting to bide time until there is no other recourse but to give in, bite the bullet, and take on the monumental task of replacing an entire policy administration system (PAS). Just the thought of that project sends IT, Business Users and Management reeling. However, is that fear real?  It is a bit daunting when one realizes that a complete policy administration system replacement will touch most every function an insurer manages, from quoting and rating, to underwriting, distribution, and even customer service. With that, everyone has heard at least one horror story around a transformation initiative that has far exceeded budget and the promised implementation / go-live timeline.    But, does it have to be that hard?  Surely, in the age where a person can voice-activate their DVR to record a TV program from a cell phone, there has to be someone somewhere who’s figured out how to simplify this process. To be able to help insurers, of all sizes, transform and grow their business while also delivering on their overall objectives of providing speed to market, straight-through-processing for applications, quoting, underwriting, and simplified product development. Maybe we’re looking too hard and the answer is simple and straight-forward. Why replace the entire machine when all it really needs is a new part…a single enterprise rating system? This core, modular piece of the policy administration system is the foundation of product development and rate management that enables insurers to provide the right product at the right price to the right customer through the best channels at any given moment in time. The real benefit of a single enterprise rating system is the ability to deliver enhanced business capabilities, such as improved product management, streamlined underwriting, and speed to market. With these benefits, carriers have accomplished a portion of their overall transformation goal. Furthermore, lessons learned from the rating project can be applied to the bigger, down-the-road PAS project to support the successful completion of the overall transformation endeavor. At the recent Oracle OpenWorld Conference in San Francisco, information was shared with attendees about a recent “go-live” project from an Oracle Insurance Tier 1 insurer who did what is proposed above…replaced just the rating portion of their legacy policy administration system with Oracle Insurance Insbridge Rating and Underwriting.  This change provided the insurer greater flexibility to set rates that better reflect risk while enabling the company to support its market segment strategy. Using the Oracle Insurance Insbridge enterprise rating solution, the insurer was able to reduce processing time for agents and underwriters, gained the ability to support proprietary rating models and improved pricing accuracy.      There is mounting pressure on P&C insurers to produce growth and show net profitability in the midst of modest overall industry growth, large weather-related losses and intensifying competition for market share.  Insurers are also being asked to improve customer service, offer a differentiated value proposition and simplify insurance processes.  While the demands are many there is an easy answer…invest in and update the most mission critical application in your arsenal, the single enterprise rating system. Download the Podcast to listen to “Stand-Alone Rating Engine - Leading Force Behind Core Transformation Projects in the P&C Market,” a podcast originally recorded in October 2013. Related Resources: White Paper: Stand-Alone Rating Engine: Leading Force Behind Core Transformation Projects in the P&C Market Webcast On Demand: Stand-Alone Rating Engine and Core Transformation for P&C Insurers Don’t forget to keep up with us year-round: Facebook: www.facebook.com/oracleinsurance Twitter: www.twitter.com/oracleinsurance YouTube: www.youtube.com/oracleinsurance

    Read the article

  • SSRS Export to Excel not working through VPN (Juniper SA4000)

    - by Veynom
    We have a SharePoint (MOSS 2007 on Win2003 R2) with SSRS reports (from SQL 2005) embedded in it. When we connect to the SharePoint portal through our VPN (firewall is Juniper SA4000) and using Internet Explorer (6, 7, and 8) and try to export any SSRS report under Excel, we get an error message: Internet Explorer cannot download . Internet Explorer was not able to open the internet site. The requested site is either unavailable or cannot be found. Please try again later. When not using the VPN (LAN from the office), everything (exporting under Excel) works fine. When using Firefox through the VPN, it works fine. When exporting to any other format (pdf or text or whatever), everything is fine under both IE and FF. Our firewall people suspect something in SSRS/MOSS/Office. Our MOSS consultants suspect something in the firewall Juniper SA4000. When using Fiddler and when not connected through VPN, I see the following traffic once i click on the "Export button": (Response was a request for client credentials) GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp HTTP/1.1 401 Unauthorized Content-Length: 1656 Content-Type: text/html Server: Microsoft-IIS/6.0 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Mon, 08 Jun 2009 09:25:21 GMT Proxy-Support: Session-Based-Authentication then (Generic Response successful): GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp Authorization: Negotiate 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 HTTP/1.1 200 OK Date: Mon, 08 Jun 2009 09:25:21 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET WWW-Authenticate: Negotiate oYGgMIGdoAMKAQChCwYJKoZIgvcSAQICooGIBIGFYIGCBgkqhkiG9xIBAgICAG9zMHGgAwIBBaEDAgEPomUwY6ADAgEXolwEWm70xlMp4oj/PyvriNMeNDigow6/MX2DpaYQdBfGkiF0Dcc323tHLRBxBL03QpvwdGBxZGAJI6V1G8sc/lVBzhlCNsZkbJcNfnMNgOgc7UPrz+ZVav/EVm3sDQ== X-AspNet-Version: 2.0.50727 Content-Disposition: attachment; filename="Product Application Report.xls" Cache-Control: private Expires: Mon, 08 Jun 2009 09:24:21 GMT Content-Type: application/vnd.ms-excel Content-Length: 23012 When using the VPN, I see no traffic in Fiddler and the error message is displayed before anything else. Update 17/06/2009: I could get a hand on some logs from our SA4000. Maybe this could help more. Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/PROTOCOL] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Enable HTTP 1.1]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts2:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts3:80/*] does not match Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Disable HTTP 1.1]... Info PTR23239 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Action [HTTP 1.0] is returned Info PTR23234 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Policy [Disable HTTP 1.1] applies to resource Info PTR23308 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Skip Policy [WEBURL/COMPRESSION] evaluation because Compression option is not enabled Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/WEBPDSID] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Corporate BI Portal]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>/*] does not match Info PTR23235 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - No Policy applies to resource Any tip welcome. :)

    Read the article

  • ASP.NET MVC Html.ValidationSummary(true) does not display model errors

    - by msi
    I have some problem with Html.ValidationSummary. I don't want to display property errors in ValidationSummary. And when I set Html.ValidationSummary(true) it does not display error messages from ModelState. When there is some Exception in controller action on string MembersManager.RegisterMember(member); catch section adds an error to the ModelState: ModelState.AddModelError("error", ex.Message); But ValidationSummary does not display this error message. When I set Html.ValidationSummary(false) all messages are displaying, but I don't want to display property errors. How can I fix this problem? Here is the code I'm using: Model: public class Member { [Required(ErrorMessage = "*")] [DisplayName("Login:")] public string Login { get; set; } [Required(ErrorMessage = "*")] [DataType(DataType.Password)] [DisplayName("Password:")] public string Password { get; set; } [Required(ErrorMessage = "*")] [DataType(DataType.Password)] [DisplayName("Confirm Password:")] public string ConfirmPassword { get; set; } } Controller: [HttpPost] public ActionResult Register(Member member) { try { if (!ModelState.IsValid) return View(); MembersManager.RegisterMember(member); } catch (Exception ex) { ModelState.AddModelError("error", ex.Message); return View(member); } } View: <% using (Html.BeginForm("Register", "Members", FormMethod.Post, new { enctype = "multipart/form-data" })) {%> <p> <%= Html.LabelFor(model => model.Login)%> <%= Html.TextBoxFor(model => model.Login)%> <%= Html.ValidationMessageFor(model => model.Login)%> </p> <p> <%= Html.LabelFor(model => model.Password)%> <%= Html.PasswordFor(model => model.Password)%> <%= Html.ValidationMessageFor(model => model.Password)%> </p> <p> <%= Html.LabelFor(model => model.ConfirmPassword)%> <%= Html.PasswordFor(model => model.ConfirmPassword)%> <%= Html.ValidationMessageFor(model => model.ConfirmPassword)%> </p> <div> <input type="submit" value="Create" /> </div> <%= Html.ValidationSummary(true)%> <% } %>

    Read the article

  • Silverlight WCF netTcpBinding problem

    - by JontyMC
    Trying to call a WCF with a netTcpBinding via Silverlight, I am getting the error: "TCP error code 10013: An attempt was made to access a socket in a way forbidden by its access permissions.. This could be due to attempting to access a service in a cross-domain way while the service is not configured for cross-domain access. You may need to contact the owner of the service to expose a sockets cross-domain policy over HTTP and host the service in the allowed sockets port range 4502-4534." My WCF service is hosted in IIS7, bound to: http://localhost.myserivce.com on port 80 and net.tcp on port 4502 I can see http://localhost.myserivce.com/myservice.svc if I browse to it (my hosts file is pointing this domain to localhost). I can also see http://localhost.myserivce.com/clientaccesspolicy.xml: <?xml version="1.0" encoding="utf-8"?> <access-policy> <cross-domain-access> <policy> <allow-from http-request-headers="*"> <domain uri="*" /> </allow-from> <grant-to> <socket-resource port="4502-4534" protocol="tcp" /> </grant-to> </policy> </cross-domain-access> </access-policy> What am I doing wrong?

    Read the article

  • Authenticating Windows 7 against MIT Kerberos 5

    - by tommed
    Hi There, I've been wracking my brains trying to get Windows 7 authenticating against a MIT Kerberos 5 Realm (which is running on an Arch Linux server). I've done the following on the server (aka dc1): Installed and configured a NTP time server Installed and configured DHCP and DNS (setup for the domain tnet.loc) Installed Kerberos from source Setup the database Configured the keytab Setup the ACL file with: *@TNET.LOC * Added a policy for my user and my machine: addpol users addpol admin addpol hosts ank -policy users [email protected] ank -policy admin tom/[email protected] ank -policy hosts host/wdesk3.tnet.loc -pw MYPASSWORDHERE I then did the following to the windows 7 client (aka wdesk3): Made sure the ip address was supplied by my DHCP server and dc1.tnet.loc pings ok Set the internet time server to my linux server (aka dc1.tnet.loc) Used ksetup to configure the realm: ksetup /SetRealm TNET.LOC ksetup /AddKdc dc1.tnet.loc ksetip /SetComputerPassword MYPASSWORDHERE ksetip /MapUser * * After some googl-ing I found that DES encryption was disabled by Windows 7 by default and I turned the policy on to support DES encryption over Kerberos Then I rebooted the windows client However after doing all that I still cannot login from my Windows client. :( Looking at the logs on the server; the request looks fine and everything works great, I think the issue is that the response from the KDC is not recognized by the Windows Client and a generic login error appears: "Login Failure: User name or password is invalid". The log file for the server looks like this (I tail'ed this so I know it's happening when the Windows machine attempts the login): If I supply an invalid realm in the login window I get a completely different error message, so I don't think it's a connection problem from the client to the server? But I can't find any error logs on the Windows machine? (anyone know where these are?) If I try: runas /netonly /user:[email protected] cmd.exe everything works (although I don't get anything appear in the server logs, so I'm wondering if it's not touching the server for this??), but if I run: runas /user:[email protected] cmd.exe I get the same authentication error. Any Kerberos Gurus out there who can give me some ideas as to what to try next? pretty please?

    Read the article

  • ASP.NET MVC 2 InputExtensions different on server than local machine

    - by Mike
    Hi everyone, So this is kind of a crazy problem to me, but I've had no luck Googling it. I have an ASP.NET MVC 2 application (under .NET 4.0) running locally just fine. When I upload it to my production server (under shared hosting) I get Compiler Error Message: CS1061: 'System.Web.Mvc.HtmlHelper' does not contain a definition for 'TextBoxFor' and no extension method 'TextBoxFor' accepting a first argument of type 'System.Web.Mvc.HtmlHelper' could be found (are you missing a using directive or an assembly reference?) for this code: <%= this.Html.TextBoxFor(person => person.LastName) %> This is one of the new standard extension methods in MVC 2. So I wrote some diagnostic code: System.Reflection.Assembly ass = System.Reflection.Assembly.GetAssembly(typeof(InputExtensions)); Response.Write("From GAC: " + ass.GlobalAssemblyCache.ToString() + "<br/>"); Response.Write("ImageRuntimeVersion: " + ass.ImageRuntimeVersion.ToString() + "<br/>"); Response.Write("Version: " + System.Diagnostics.FileVersionInfo.GetVersionInfo(ass.Location).ToString() + "<br/>"); foreach (var method in typeof(InputExtensions).GetMethods()) { Response.Write(method.Name + "<br/>"); } running locally (where it works fine), I get this as output: From GAC: True ImageRuntimeVersion: v2.0.50727 Version: File: C:\Windows\assembly\GAC_MSIL\System.Web.Mvc\2.0.0.0__31bf3856ad364e35\System.Web.Mvc.dll InternalName: System.Web.Mvc.dll OriginalFilename: System.Web.Mvc.dll FileVersion: 2.0.50217.0 FileDescription: System.Web.Mvc.dll Product: Microsoft® .NET Framework ProductVersion: 2.0.50217.0 Debug: False Patched: False PreRelease: False PrivateBuild: False SpecialBuild: False Language: Language Neutral CheckBox CheckBox CheckBox CheckBox CheckBox CheckBox CheckBoxFor CheckBoxFor CheckBoxFor Hidden Hidden Hidden Hidden HiddenFor HiddenFor HiddenFor Password Password Password Password PasswordFor PasswordFor PasswordFor RadioButton RadioButton RadioButton RadioButton RadioButton RadioButton RadioButtonFor RadioButtonFor RadioButtonFor TextBox TextBox TextBox TextBox TextBoxFor TextBoxFor TextBoxFor ToString Equals GetHashCode GetType and when running on the production server (where it fails), I see: From GAC: True ImageRuntimeVersion: v2.0.50727 Version: File: C:\Windows\assembly\GAC_MSIL\System.Web.Mvc\2.0.0.0__31bf3856ad364e35\System.Web.Mvc.dll InternalName: System.Web.Mvc.dll OriginalFilename: System.Web.Mvc.dll FileVersion: 2.0.41001.0 FileDescription: System.Web.Mvc.dll Product: Microsoft® .NET Framework ProductVersion: 2.0.41001.0 Debug: False Patched: False PreRelease: False PrivateBuild: False SpecialBuild: False Language: Language Neutral CheckBox CheckBox CheckBox CheckBox CheckBox CheckBox Hidden Hidden Hidden Hidden Hidden Hidden Password Password Password Password RadioButton RadioButton RadioButton RadioButton RadioButton RadioButton TextBox TextBox TextBox TextBox ToString Equals GetHashCode GetType note that "TextBoxFor" is not present (hence the error). I have MVC referenced in the csproj: <Reference Include="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL"> <SpecificVersion>True</SpecificVersion> <HintPath>References\System.Web.Mvc.dll</HintPath> <Private>True</Private> </Reference> I just can't figure it what to do next. Thoughts? Thanks! -Mike

    Read the article

  • Can't clone gitosis-admin.git local from my snow leopard server running gitosis

    - by joggink
    I've installed gitosis as described here: http://gist.github.com/264304 One of the things that I had to adjust was to give my git user permissions to use ssh (which I did trough server admin - access - ssh and added the 'git' user). When I ssh from my local machine (mac osx) as the git user, I get this response: PTY allocation request failed on channel 0 bash: gitosis-serve: command not found Connection to 10.0.0.108 closed. Which I think is normal, because in Pro GIT the author says you should get something like this if you try ssh'ing to the server using your git user: PTY allocation request failed on channel 0 fatal: unrecognized command 'gitosis-serve schacon@quaternion' Connection to gitserver closed. So far so good, I think? Now when I try to clone my gitosis-admin.git repository using this command: $git clone [email protected]:gitosis-admin.git I get this: Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ bash: gitosis-serve: command not found fatal: The remote end hung up unexpectedly So after doing some searching, I found an answer here on serverfault claiming I should use ssh:// as protocol for my git clone (which I thought is the default git protocol?) However, when I try: $git clone ssh://[email protected]:gitosis-admin.git This is the response: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: Password: Password: Permission denied (publickey,keyboard-interactive). fatal: The remote end hung up unexpectedly When I type in my own password (because my git user has no password), I get following error: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: bash: git-upload-pack: command not found fatal: The remote end hung up unexpectedly I added my upload-pack location as followed: $git clone -u /usr/local/git/bin/git-upload-pack ssh://[email protected]:gitosis-admin.git I get the error that gitosis-admin.git isn't a git repo... Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: fatal: '[email protected]:gitosis-admin.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly I've been searching for a solution for almost a week now, and every topic I've found on the internet gives no result...

    Read the article

  • Android exception i don't understand after loading webpage in a webview

    - by DixieFlatline
    I have a webview that loads a webpage. I also have a reload button. Sometimes it works but sometimes it crashes when i hit reload and i get this exceptions: 05-14 10:08:33.958: ERROR/WindowManager(918): Activity com.poslji.gor.Uvod has leaked window com.android.internal.policy.impl.PhoneWindow$DecorView@435da698 that was originally added here 05-14 10:08:33.958: ERROR/WindowManager(918): android.view.WindowLeaked: Activity com.poslji.gor.Uvod has leaked window com.android.internal.policy.impl.PhoneWindow$DecorView@435da698 that was originally added here 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewRoot.(ViewRoot.java:217) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:148) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:91) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.Window$LocalWindowManager.addView(Window.java:392) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.app.Dialog.show(Dialog.java:231) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.app.ProgressDialog.show(ProgressDialog.java:107) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.app.ProgressDialog.show(ProgressDialog.java:90) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.poslji.gor.Odgovori$2.onClick(Odgovori.java:120) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.View.performClick(View.java:2179) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.View.onTouchEvent(View.java:3828) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.widget.TextView.onTouchEvent(TextView.java:6307) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.View.dispatchTouchEvent(View.java:3368) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1752) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1206) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.app.Activity.dispatchTouchEvent(Activity.java:1997) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1736) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:903) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1752) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1206) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.app.Activity.dispatchTouchEvent(Activity.java:1997) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1736) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.view.ViewRoot.handleMessage(ViewRoot.java:1761) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.os.Handler.dispatchMessage(Handler.java:99) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.os.Looper.loop(Looper.java:123) 05-14 10:08:33.958: ERROR/WindowManager(918): at android.app.ActivityThread.main(ActivityThread.java:3948) 05-14 10:08:33.958: ERROR/WindowManager(918): at java.lang.reflect.Method.invokeNative(Native Method) 05-14 10:08:33.958: ERROR/WindowManager(918): at java.lang.reflect.Method.invoke(Method.java:521) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:782) 05-14 10:08:33.958: ERROR/WindowManager(918): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:540) 05-14 10:08:33.958: ERROR/WindowManager(918): at dalvik.system.NativeStart.main(Native Method) 05-14 10:08:36.768: ERROR/AndroidRuntime(918): Uncaught handler: thread main exiting due to uncaught exception 05-14 10:08:36.778: ERROR/AndroidRuntime(918): java.lang.IllegalArgumentException: View not attached to window manager 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.view.WindowManagerImpl.findViewLocked(WindowManagerImpl.java:356) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.view.WindowManagerImpl.removeView(WindowManagerImpl.java:201) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.view.Window$LocalWindowManager.removeView(Window.java:400) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.app.Dialog.dismissDialog(Dialog.java:268) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.app.Dialog.access$000(Dialog.java:69) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.app.Dialog$1.run(Dialog.java:103) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.app.Dialog.dismiss(Dialog.java:252) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at com.poslji.gor.Odgovori$HelloWebViewClient.onPageFinished(Odgovori.java:180) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.webkit.CallbackProxy.handleMessage(CallbackProxy.java:225) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.os.Handler.dispatchMessage(Handler.java:99) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.os.Looper.loop(Looper.java:123) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at android.app.ActivityThread.main(ActivityThread.java:3948) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at java.lang.reflect.Method.invokeNative(Native Method) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at java.lang.reflect.Method.invoke(Method.java:521) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:782) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:540) 05-14 10:08:36.778: ERROR/AndroidRuntime(918): at dalvik.system.NativeStart.main(Native Method) What is going wrong here?

    Read the article

  • How to use my own connection when using iBatis Data Mapper?

    - by Amitabh
    How can I use my own connection Provider when using iBatis Data Mapper? I have to use UserId and Password of the user performing the db operation in the ConnectionString? E.g. The following ConnectionString has to be modified to insert the userid and password for user performing the db operation. Data Source=TEST;Persist Security Info=True;User ID={userID};Password={password} How can this be handled in iBatis DataMapper?

    Read the article

  • java.rmi.UnmarshalException: unable to pull client classes by server

    - by andrews
    Hi, I have an RMI client/server set-up on two machines that works fine in a simple situation when the server doesn't require a client-side defned class. However, when I need to use a class defined on the client side I am unable to have the server unmarshall those classes. I suspect this is an issue with my java.rmi.server.codebase property that I pass in as argument to the client app. I followed Sun's RMI Tutorial trail and I think I have followed the steps exactly except that I don't specify a classpath argument when executing client and server because they execute in the directory right above the root package directory (however I tried that too with no effect). The exceptions I get when attempting to execute the different client-side combinations described in detail below are all the same: RmiServer exception: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is: java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is: java.lang.ClassNotFoundException: test.MyTask at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:353) at sun.rmi.transport.Transport$1.run(Transport.java:177) at java.security.AccessController.doPrivileged(Native Method) at sun.rmi.transport.Transport.serviceCall(Transport.java:173) at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:553) at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:808) at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:667) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:636) at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255) at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233) at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:142) at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:178) at java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:132) at $Proxy0.execute(Unknown Source) at test.myClient.main(myClient.java:32) The details are: My client/server rmi is set up over a home network behind a router. The router is assigned to a static ip address I will call myhostname. Appropriate port-mapping is set-up in the router that points to the right machines. role, machine, os, ip-address: server, venice, linux ubuntu 9.10, 10.0.1.2 client, naples, mac os x leopard, 10.0.1.4 I startup the server side as follows inside /home/andrews/workspace/epsilon/bin: 1 starting registry on the default port 1099: venice% rmiregistry & 2 starting web-server on port 2001 pointing to code base for common interfaces: venice% java webserver/ClassFileServer 2001 /home/andrew/workspace/epsilon/bin 3 starting server app (main class in test/myServer) which registers the server object: venice% java -Djava.rmi.server.codebase="http://myhostname:2001/" -Djava.security.policy=server.policy -Djava.rmi.server.hostname=myhostname test/myServer & Now the client side inside /Users/andrews/Development/Java/workspace/epsilon/bin: 1 start a local web server that can server client-side classes to the server (not sure if this is needed, but I added I tried it, and still no success; I have added port-mapping to the router for 2001 to venice, for 2002 to naples) naples$ java webserver/ClassFileServer 2002 /Users/andrews/Development/Java/workspace/epsilon/bin/ Trying to run the client (note: I don't specify the -cp argument because client executes right above the root package directory): 1 try #1 using an http hostname naples$ java -Djava.rmi.server.codebase=http://10.0.1.4:2002/ -Djava.security.policy=client.policy test.myClient myhostname Note 1: the myhostname argument at the end is passed-in to the client so that it resolves to server's rmi hostname. Note 2: I tried using localhost:2002 instead of 10.0.1.4:2002 too. Note 3: I tried using myhostname:2002 since myhostname is assigned to the router and I have proper port-mapping set-up, this address should resolve to naples and not venice 2 try #2: naples$ java -Djava.rmi.server.codebase=file:/Users/andrews/Development/Java/workspace/epsilon/bin/ -Djava.security.policy=client.policy test.myClient myhostname Note 1: the code base url format is correct, I created a small program to convert current file directory path into a url and used that. using file:///Users... has same effect. Other notes: 1 my server and client policy files correctly specify the path, as I've tested this setup with good and bad paths, and getting a security exception for bad path 2 this setup works if I don't use client-side defined objects, the client connects correctly to the server and the server executes. 3 when I place the client-side class on the server in the server's classpath, all executes fine. All help is appreciated.

    Read the article

  • SSH closing by itself - root works fine

    - by Antti
    I'm trying to connect to a server but if i use any other user than root the connection closes itself after a successful login: XXXXXXX:~ user$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to XXXXXXX.XXXXXX.XXX [xxx.xxx.xxx.xxx] port 22. debug1: Connection established. debug1: identity file /Users/user/.ssh/identity type -1 debug1: identity file /Users/user/.ssh/id_rsa type -1 debug1: identity file /Users/user/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXXXXXX.XXXXXX.XXX' is known and matches the RSA host key. debug1: Found key in /Users/user/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering public key: /Users/user/.ssh/woo_openssh debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Offering public key: /Users/user/.ssh/sidlee.dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /Users/user/.ssh/identity debug1: Trying private key: /Users/user/.ssh/id_rsa debug1: Offering public key: /Users/user/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. Last login: Mon Mar 29 01:41:51 2010 from 193.67.179.2 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to XXXXXXX.XXXXXX.XXX closed. Transferred: sent 2976, received 2136 bytes, in 0.5 seconds Bytes per second: sent 5892.2, received 4229.1 debug1: Exit status 1 If i log in as root the exact same way it works as expected. I've added the users i want to log in with to a group (sshusers) and added that group to /etc/sshd_config: AllowGroups sshusers I'm not sure what to try next as i don't get a clear error anywhere. I would like to enable specific accounts to log in so that i can disable root. This is a GridServer/Media Temple (CentOS).

    Read the article

  • Active directory integration not working properly with winbind and samba

    - by tubaguy50035
    I'm trying to get my linux box to use active directory authentication. I believe I have almost everything setup correctly. I'm able to issue wbinfo -g and wbinfo -u and see all the groups and users respectively. Brief intro to my setup: The username I use on my linux box to do admin things is nick. My active directory username is nwalke. They have two different passwords. I am able to log in to the box with nick and that user's password and I'm also able to login as nwalke with nwalke's password. The curious bit: Upon creating the active directory user's home directory, I run a script that requires root access. This is to setup some system wide things like a samba share for them. When I log in as nwalke, I enter my nwalke password and it succeeds. I'm then greeted with [sudo] password for nick:. If I enter my nwalke password here, it says Sorry, try again.. If I enter nick's password, it says Sorry, user nick is not allowed to execute scriptname as root. If I do groups as nwalke, I see that magically my user has been given the group nick. Now, I accidentally thought that nick had a UID of 100, not 1000. So originally in my smb.conf I had idmap uid 1000-10000. The only thing I can think of, is that I logged in with nwalke while that was still set and now I'm just being presented with a UID of 1000 forcing linux to think I'm nick. I'm not really sure where to go from here. Like I said, I'm fairly certain active directory is communicating with my server properly, but something must not be mapped right on the linux side. Any thoughts? Here is my smb.conf: [global] security = ads netbios name = hostname realm = COMPANY.COM password server = adshost.company.com workgroup = COMPANY idmap uid = 10000-90000 idmap gid = 10000-90000 winbind separator = + winbind enum users = no winbind enum groups = no winbind use default domain = yes template homedir = /home/%D/%U template shell = /bin/bash client use spnego = yes domain master = no load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes Let me know if more information about something is required.

    Read the article

  • autehntication on gui application written on perl

    - by oren
    Its not specific perl question I am building a perl gui/wxperl application that connect to DB . I want my application to be a password protected i.e first the user should enter the user and password and then use the appication . what is the best secure method to store the password could someone provide an idea what is the best method to how should i store the user and the password and how should i retrieve them for authentication ? if possible could someone provide some perl code how to do this ?

    Read the article

  • Having troubles connectiong Magento to external Windows Database Server using Windows Azure

    - by Kevin H
    "I tried to make this easy to read through" I am using Ubuntu 12.04 LTS for Magento and installed these commands onto the system: sudo apt-get install apache2 sudo apt-get install php5 libapache2-mod-php5 sudo apt-get install php5-mysql sudo apt-get install php5-curl php5-mcrypt php5-gd php5-common sudo apt-get install php5-gd I used Windows Server 2008 R2 August 2012 for Mysql Server For a reference, I used http://www.windowsazure.com/en-us/manage/windows/common-tasks/install-mysql/ When the server was setup, I added an empty disk to it Then, I added endpoints 3306 Next I accessed the server remotely After that, I formatted the empty disk and was inserted as F: Next I downloaded Mysql from http://*.mysql.com version Windows (x86, 64-bit), MSI Installer 5.5.28 In the installation process, I used these settings: Typical Setup - Clicked Next, install, next Chose Detailed Configuration - Clicked next Chose Dedicated MySQL Server Machine - Clicked Next Chose Transactional Database Only - Clicked Next Chose the "F:" Drive - Clicked Next Chose Online Transactional Processing (OLTP) - Clicked Next For Networking Options, I checkmarked 'Enable TCP/IP Networking" 'Add firewall exception for this port' 'Enable Strict Mode' - Clicked Next Chose Standard Character Set - Clicked Next For Windows Options, I checkedmarked 'Install as Window Service" 'Launch the MySQL Server automatically' 'Include Bin Directory in Windows PATH - Clicked Next For Security Options, I checkmarked 'Modify Security Settings' and set root password - Clicked Next Finally clicked Execute and Finish These are the Firewall Setting that I set I clicked inbound rules Properties Scope Allow IP Address and used the internal Address for Magento Server Clicked Apply and exited Next, I opened up MySQL 5.x Command Line Client Entered Root Password Then entered these commands mysql create database magento; mysql Create user magentouser identified by 'password'; mysql Grant select, insert, create, alter, update, delete, lock tables on magento.* to magentouser mysql exit Finally, I opened up the Magento Downloader Magento validation has approved all PHP version is right. Your version is 5.3.10-1ubuntu3.4. PHP Extension curl is loaded PHP Extension dom is loaded PHP Extension gd is loaded PHP Extension hash is loaded PHP Extension iconv is loaded PHP Extension mcrypt is loaded PHP Extension pcre is loaded PHP Extension pdo is loaded PHP Extension pdo_mysql is loaded PHP Extension simplexml is loaded These are all installed on Magento Server For the Database Connection, I used: The Database server only has MySQL 5.5 Server installed on it Host - Internal IP address User Name - The User I created when setting up database Password - The Password I created when setting up database For the password, I did some research and found out that Magento only accepts alphanumeric, so I went and set it up again and used only alphanumeric for the User password Now, I am still getting Accessed denied for database Connection. Also, I have tryed to setup mysql on independant Linux Server but kept getting errors. When, I found the solution. Wouldn't work, so I decided to try Windows. These is the questions, I have been asking and researching to debug this issue Is it because I am using Linux for magento and Windows for Database. I have had no luck in finding a reason why this wouldn't work There must be something, I am missing I also researched the difference between linux sql databases and windows sql databases but have not come to conclusion, if installing Mysql on windows would make a difference in syntax and coding. I have spent a lot of time looking into this and need some help with direction on how to complete my project. Any type of help would be appreciated.

    Read the article

  • Sed does not work in expect

    - by Sharjeel Sayed
    I made this bash one-liner which I use to list Weblogic instances running along with their full paths.This works well when I run it from the shell. /usr/ucb/ps auwwx | grep weblogic | tr ' ' '\n' | grep security.policy | grep domain | awk -F'=' '{print $2}' | sed 's/weblogic.policy//' | sed 's/security\///' | sort I tried to incorporate this in an expect script send "echo Weblogic Processes: ; /usr/ucb/ps auwwx | grep weblogic | tr ' ' '\n' | grep security.policy | grep domain | awk -F'=' '{print \$2}' | sed 's/weblogic.policy//' | sed 's/security\///' | sort ; echo ; echo\r" but I got this error sed: -e expression #1, char 13: unknown option to `s' Please help

    Read the article

  • TextField focus on UIAlertView

    - by Nyxem
    Hello, I have a subclass of UIAlertView with 2 UITextField for login / password. My problem is that when I have finished to type my login and change the focus to the password field, there is a cursor on the login field and on the password field, but the focus is on the password field, so my question is, how can I make the cursor disappear on the login field ? Thanks for your help.

    Read the article

  • OpenPeak Flash app XMLSocket Security Problem

    - by Kira
    We're trying to create an app for OpenPeak. The Flash app will act as a client to a Java server on another computer on another domain. The Flash app client connects via XMLSocket. The Java Server uses ServerSocket to receive a request and send back a message. In order to trust the server, the Flash client needs a socket master policy file to tell it that the server comes from a trustworthy domain. According to an article on Adobe, when a connection has succeeded, the Flash client automatically requests the cross-domain policy or socket master policy file on port 843. Still, even when we implement it according to the tutorials and recommendations we have read, the Flash client continues to throw the following security error: SecurityErrorEvent type="securityError" bubbles=false cancelable=false eventPhase=2 text="Error #2048" We've tried logging the policy file request during testing to see if there was any call made to port 843. There was not. Interestingly, even without a policy file, the Flash client still manages to send the first data message to the server successfully. It's just when the server tries to send back a reply that the entire thing hangs for about 10 seconds before the security error above is displayed. Any ideas / suggestions?

    Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >