Search Results

Search found 4751 results on 191 pages for 'ram gopal'.

Page 110/191 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Post Error, Fixed/Removable Media Error

  - by Dan

  Hi, I really do not know what I am missing here. I ordered parts for a new server. The board is an Intel s3420GP. From the diagnostic LEDs I get the error message: 0xB1h which corresponds to "Fixed Media: Disabling fixed media" and 0xB8h which corresponds to "Removable Media: Resetting removable media device." I can not for the life of me figure out what it is talking about. I have two identical motherboards and both gave the error message. I don't have a second CPU yet, so I can't test that. There are no beeps or anything. It seems the server resets every 10 seconds or so (the speaker does work, I put the RAM in the wrong slots on purpose to test this out, and the correct error POST code came up) Please help me, I'm not sure where else to turn or to ask

  Read the article

• Is a cluster the most cost effective redundancy method for windows server 2003?

  - by Ryan

  We had a server with bad ram which caused a long outage while they figured it out and our client facing apps had to go down for a while. We are coming up with a solution for instant fail-over but are not sure what the most cost effective method would be. Is a windows server cluster the best method for this? Also note we are using Parallels Virtuozzo if that makes any difference here. We found Parallels has a documented method for setting this up but it said it required a Domain Controller as well as a Fiber connection to shared storage, is all that really needed? Thanks.

  Read the article

• One bigger Virtual Machine distributed across many OpenStack nodes [duplicate]

  - by flyer

  This question already has an answer here: Can a virtualized machine have the CPU and RAM resources of multiple underlying physical machines? 2 answers I just setup virtual machines on one hardware with Vagrant. I want to use a Puppet to configure them and next try to setup OpenStack. I am not sure If I am understanding how this should look at the end. Is it possible to have below architecture with OpenStack after all where I will run one Virtual Machine with Linux? ------------------------------- | VM with OS | ------------------------------- | NOVA | NOVA | NOVA | ------------------------------- | OpenStack | ------------------------------- | Node | Node | Node | ------------------------------- More details: In my environment Nodes are just virtual machines, but my question concerns separate Hardware nodes. If we imagine this Nodes(Novas) are placed on a separate machines (e.g. every has 4 cores) can I run one Virtual Machine across many OpenStack Nodes? Is it possible to aggregate the computation power of OpenStack in one virtual distributed operating system?

  Read the article

• Laptop hardware recommendations for multi-platform development

  - by iama

  I am thinking of buying a laptop with the following configuration - Intel core 2 duo(or I3-330M)/ 4GB RAM/300+ GB 7200 RPM. I would like to be able to run two server VMs on this laptop with Win2K8 and Ubuntu (preferably 64 bit editions). Windows 7 will be the Host OS since that is the one that ships with the laptop. I am thinking of using VMWare player to run the two server OSs. Is this laptop good enough to run the two VMs side by side or do I need to go for a better configuration? Any suggestions? Thanks.

  Read the article

• Mac Book Pro SSD

  - by LiamB

  I have a Mac Book Pro (I7 and 8 Gig Ram). I'm a developer - do a fair amount of .net via VMware but lots of Ruby and NodeJs on the Mac. I'm looking to extract some more performance and i think a SSD might be a good option. So I have 2 questions, Can I straight up replace the drive thats in there with a SSD or will this cause me problems? I have files on there as well as apps. What are my options in terms of available hardware.

  Read the article

• Rugged Netbook and software options for Running R statistical software?

  - by Thomas

  I am interested in purchasing a netbook to do field research in another country. My hardware specifications for the nebtook: -Be rugged enough to survive a bit of wear and tear -Fairly fast processing (the ability to upgrade from 1GB of RAM to 2GB) -A battery life of longer than 6 hours -At least a 10 inch screen -A decent camera for Skyping My software needs: -Be able run a Spreadsheet program to do basic data input (like Excel or Open Office) -Use the Open Source Statistical Program R to do basic data analysis (Regression, data analysis etc.) -Word Processing (Word or Open Office) Do you have any suggestions on which models or brands my fit my needs? Some of the models I was considering: Samsung NB-30 Toshiba NB 305 Asus Eee PC 1005HA Lenovo S10-2 Also any recommendations on the best software to load on the aforementioned Netbooks. I saw this resource from [livehacker][6] Any comments. Thanks for your help! -Thomas

  Read the article

• Throughput = BS * IOPS?

  - by Marvin

  I've seen in many places that throughput = bs * iops should be true. For example writing at 128k block size to a SAS disk that can support 190 IOPS should give a throughput of ~23 MBps - 23.75(MBs) = 128(BS)*190(SAS-15 IOPS)/1024. Now when I tested it in a VM against a monster NetApp filer I got theses results: # dd if=/dev/zero of=/tmp/dd.out bs=4k count=2097152 8589934592 bytes (8.6 GB) copied, 61.5996 seconds, 139 MB/s To view the IO rate of the VM I used iostat and esxtop, and they both showed around 250 IOPS. So to my understanding the throughput was supposed to be ~1000k: 1000(KBs) = 4(BS)*250(IOPS). dd of 8GB is twice the size of RAM of course, so no page caching here. What am I missing? Thanks!

  Read the article

• Laptop hardware recommendations for multi-platform development

  - by iama

  I am thinking of buying a laptop with the following configuration - Intel core 2 duo(or I3-330M)/ 4GB RAM/300+ GB 7200 RPM. I would like to be able to run two server VMs on this laptop with Win2K8 and Ubuntu (preferably 64 bit editions). Windows 7 will be the Host OS since that is the one that ships with the laptop. I am thinking of using VMWare player to run the two server OSs. Is this laptop good enough to run the two VMs side by side or do I need to go for a better configuration? Any suggestions? Thanks.

  Read the article

• Ubuntu 9.10 x86_32 with PAE causes graphics issues, mainly slowness

  - by widgisoft

  I've tried the 64bit version and found I was constantly hitting a brick wall trying to get 32bit stuff to run; I'd previously used PAE on 9.04 without any issues so figured I'd give it a shot. However, on 9.10 it seems PAE or the process of enabling PAE breaks the nvidia drivers/module somewhat as performance is terrible; I can't even enable desktop effects and there's lots of artifacting on random controls. Disabling the pae image and rebooting fixes the issue however I'm then stuck with "only" 2.7Gb of ram and unable to use the full 8gb that's installed. Is there somthing special I need to do when using pae and nVidia drivers or should I be using 64bit and just figure out how to force run 32bit packages? :-p

  Read the article

• Rough estimate for speed advantage of SAN-via-fibre to san-via-iSCSI when using VMware vSphere

  - by Dirk Paessler

  We are in the process of setting up two virtualization servers (DELL R710, Dual Quadcore Xeon CPUs at 2.3 Ghz, 48 GB RAM) for VMware VSphere with storage on a SAN (DELL Powervault MD3000i, 10x 500 GB SAS drives, RAID 5) which will be attached via iSCSI on a Gbit Ethernet Switch (DELL Powerconnect 5424, they call it "iSCSI-optimized"). Can anyone give an estimate how much faster a fiber channel based solution would be (or better "feel")? I don't mean the nominal speed advantage, I mean how much faster will virtual machines effectively work? Are we talking twice the speed, five times, 10 times faster? Does it justify the price? PS: We are not talking about heavily used database servers or exchange servers. Most of the virtualized servers run below 3-5% average CPU load.

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now...no problems (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• How to optimize mysql databse for serving 1000s of requests at a time ?

  - by Bilal

  How to optimize mysql databse for serving 1000s of requests at a time ? for a site like: linksnappy.com Is it possible to configure 2 seperate mysql servers into one load balancing server? like if one of them is overloaded switch to the next one ? same question for the http requests handling server. Another question : what kind of server do I need to server 1000s of requests at a time ? (http server) you can see the kind of site Im talking about is a download site. the server just dies when we have too many download requests. we currently have intel xeon quad core 2.4ghz with 4gb of ram.

  Read the article

• Are these components compatible and are there any significant bottlenecks?

  - by Tom Gullen

  I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

  Read the article

• raspberry pi for web programming/development

  - by Mark Dee

  I'm into web development and my machine (AMD Phenom II, 8G RAM) is running Ubuntu 13.04. I love my current setup but I kinda miss some of Windows software like MSOffice or Adobe suites, and running on Virtualbox doesn't feel as snappy for me.... So I'm thinking of buying a new cheap machine where I would install Linux and do my development work there and have my current machine run Windows. I just found this thing called Raspberry pi which is really cheap and requires 12v only (I think) which makes it good for downloading stuff overnight. So, does it make sense to buy Raspberry pi, make it my primary dev machine, Windows being the secondary (for Adobe and browser testing of course)? Basically, I want to know if Raspberry pi meets the following requirements: It should run ArchLinux Sublime Text 3 python ruby nginx nodejs Deluge or Transmission (well, maybe just those, no need for videos and music players)

  Read the article

• Recommended CPU upgrade for Dell Vostro 220 with Intel E7300 processor?

  - by Justin Grant

  I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

  Read the article

• development and music recording machine suggestions?

  - by dean nolan

  I wasn't sure if this belongs on SuperUser so flag if so. I am looking to build, primarily, a windows development machine that is also good for recording using Cubase. I know I should use seperate machines but I'm on a budget this time of year. I also havn't kept up with hardware for quite a few years. Basically I know I want quad core, multiple monitor support (no gaming requirements). A lot of RAM, very quiet case and super fast HDD (SSD OR 10,000RPM)for compiling and latency. I will store libraries and other data on a USB drive. Sound card is not needed as I will be using an audio interface, all other music recording equipment is taken care of also. I could do with some decent monitor recomendations also. All suggestions welcome, thanks.

  Read the article

• Recommended Configuration to setup Tomcat 7 on windows OS

  - by yashbinani

  I have created a small web application using java/jee which will be deployed in LAN environment. I want to know the recommended hardware configuration. Details are as follows 1) Expected number of hits: 20 hits / hour 2) Number of clients 5-7 3) Application Server : Tomcat 7 4) Database server : MySql App and DB shall be deployed on same machine 5) OS Configuration : Windows XP or any unix flavour ? Can a simple p4/celeron machine with 1 gb ram 8-10 GB hard disk will be sufficient to cater client requests? Server will not be storing too many files/images/videos Client does not want to spend too much on infrastructure.

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

• Simultaneous read/write to RAID array slows server to a crawl

  - by Jeff Leyser

  Fairly beefy NFS/SMB server (32GB RAM, 2 Xeon quad cores) with LSI MegaRAID 8888ELP controlling 12 drives configured into 3 different arrays. 5 2TB drives are grouped into a RAID 6 array. As expected, write performance to the array is slow. However, sustained, simultaneous read/write to the array (wether through NFS or done locally) seems to practically block any other access to anything else on the controller. For example, if I do: cp /home/joe/BigFile /home/joe/BigFileCopy where BigFile is 20G, then even a simple ls /home/jane will take many 10s of seconds to complete. In addition, an ls /backup will also take many tens of seconds, even though /backup is a different array on the same controller. As soon as the cp is done, everything is back to normal. cp /home/joe/BigFile /backup/BigFile does not exhibit this behavior. It's only when doing read/write to the same array.

  Read the article

• MS-DOSdivide overflow

  - by repozitor

  when i want to install my dear application on MS-DOS os, i see error "Divide Overflow" what is the meaning of this error and how to fix it? the procedure of installing is: 1-partitioing my HDD disk 2-format C drive 3-installing MS-DOS 4-add the flowing lines to config.sys "DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE RAM DEVICE=C:\DOS\RAMDRIVE.SYS 6000 512 64 /e" 5-insert my floppy application and then restart 6-when boot process completed, all of the thing appear correctly and i now how to do the next steps note:for installing my application i need to boot from floppy app when i have ms-dos on my hdd disk i do it successfully on the Virtual machine, Q emulator but i can't do it on the real machine, Vectra HP PC, because of divide overflow

  Read the article

• Optimal Memory Configuration for Dell PowerEdge 1800 (Windows Server 2000 32bit)

  - by David Murdoch

  I am upgrading the memory on a Dell PowerEdge 1800 Server running Windows Server 2000 (32 bit). My Computer Properties currently reports "2,096,432 KB RAM" (4 modules @ 512MB each). Crucial.com scan reports: "Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot. Maximum Memory Capacity:  12288MB Currently Installed Memory:  2GB Available Memory Slots:  2 Total Memory Slots:  6 Dual Channel Support:   No CPU Manufacturer:  GenuineIntel CPU Family:  Intel(R) Xeon(TM) CPU 2.80GHz Model 4, Stepping 1 CPU Speed:  2793 MHz Installed in pairs of modules." We will be completely replacing the old 512 MB modules. Will there be any performance difference between installing 4 modules @ 1GB vs. 2 modules @ 2GB?

  Read the article

• Windows Disk I/O Analysis

  - by Jonathon

  It appears that we are having a problem with the disk i/o speed on our Windows 2003 Enterprise Edition server (64-bit). As we were initializing a database that created two 1G tablespaces on 3 different machines, it became obvious that the two smaller machines (each 32-bit Windows 2003 Standard Edition with less RAM) killed the larger machine when creating the files. The larger machine took 10x as long to create the tablespaces than did the other machines. Now, I am left wondering how that could be. What programs or scripts would you guys recommend for tracking down the I/O problem? I think the issue may be with the controller card (all boxes are hardware RAID 10, but have different controller cards), but I would like to check the actual disk I/O speed as well, so I have some hard numbers to work with. Any help would be appreciated.

  Read the article

• Vista x64: Improving troubleshoot approach skills

  - by Chau

  I'm not a Windows SuperUser, but neither just the regular user. I don't mind browsing the Registry, using Process Explorer, reading the Event logs, (un)installing new drivers and so on, but all this only makes me solve some problems. I tend though to run into problems where these tools aren't enough. Which tools should I learn about to improve my troubleshooting skills in Windows? Currently I'm using Windows Vista x64 (not moved to 7 yet), facing audio/video stuttering problems and I think this is a good place to improve my troubleshooting skills. I know this post is similar to this question, but my machine is only hanging occationally. Specs: Intel Q6600 Stock speed ASUS P5QD Turbo 4GB ram NVIDIA GTS-8800 640 HDA Xplosion 7.1 Seasonic 430W Windows Vista Business x64

  Read the article

• Computer becomes very slow (permanently) after running a bunch of apps

  - by djzmo

  Hello there, My computer with Windows XP installed becomes very slow after I ran some heavy tasks at a time. (play a full 3D online game while extracting a 4GB RAR archive) It freezes for about 200~500ms every few seconds, and this always happens if I do heavy tasks at once in my computer (for example, installing a program while playing games), and the lag remains permanently (even a reboot won't make it better) unless I repair-install the Windows. Since I have a low-end computer: Intel(R) Pentium(R) 4 CPU 2.00 GHz, 512 MB of RAM ATI RADEON 9550 AGP 256 MB And the only way I used everytime to fix this problem is by repair-installing my Windows XP. So that I won't lose any data or installed programs. But I believe there's a better and faster way to fix this without repair-installing the Windows. Any idea?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >